cluster. Volume-keys (via adc) for the Pinephone Pro, display support for
the Anbernic RG353. As well as gpio-ranges for rk356x and fixes for the
audio-codec node-names on two boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQ92RgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcXBB/43meqk8lbSdnOl12+ct+JC6U7wK6WB3RHk
1vVlzxQTL5myaKlVdXbA55FoxkETs2fL4oBeekJ/ajlRysQkW3nEQl6QsnbPY2gn
sDVDvogX7EKsp7X2ECLmzxxgJl/R2PY2Jsl5mbqMt3tXAl3J75fSIrPwptd4JTqg
IxtN16IHBmTPwlyDY/AXSDICudMET/URUkjaYOR4S6BcN2+7oR5M9NP4DD9/0P6f
1FV0FxTMSNAMiEpDCtHPfa29pjh83CtIpW57v2yvXthsiSR3McmNXPhnYbuZKCvD
ZE7NzhgXHvbRatR0YHj+vj8HHoYDYkRYTrbIRoWMvc2tT/ht34QQ
=4xMh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=d/86
-----END PGP SIGNATURE-----
Merge tag 'v6.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
On the Rock5b a fix the newly added rtc node and cpu-regulators for the big
cluster. Volume-keys (via adc) for the Pinephone Pro, display support for
the Anbernic RG353. As well as gpio-ranges for rk356x and fixes for the
audio-codec node-names on two boards.
* tag 'v6.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
arm64: dts: rockchip: add panel to Anbernic RG353 series
Link: https://lore.kernel.org/r/5144826.MHq7AAxBmi@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are implemented via regular ADC, so regular polling is needed,
for these keys to work.
Co-developed-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230405123813.2272919-1-pbrobinson@gmail.com
[increased Volume-Down voltage to 600mV as suggested by Ondrej]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZD0PuAAKCRAd+FPLCI8z
YljSAP9IWstTYTmoFOga4Ba4S8LBcmuTBUqHmVbHNZYCO3JrfwD/T4Xn2qvHfdsd
/ajLodjmHoLh/E6HuSai55u6YLGi6As=
=e3Zh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=sofq
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.4 (v2).
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
* tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
Link: https://lore.kernel.org/r/d0862463-acb3-ce83-6493-281a833ec87e@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The RK8602 and RK8603 voltage regulators on the Rock 5B board provide
the power lines vdd_cpu_big0 and vdd_cpu_big1, respectively.
Add the necessary device tree nodes and bind them to the corresponding
CPU big core nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-4-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The hym8563 RTC driver doesn't handle the 'clock-frequency' property,
which is also indicated by the following dtbs_check warning:
rk3588-rock-5b.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected)
From schema: Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
Drop the unsupported property.
Fixes: 1e9c2404d8 ("arm64: dts: rockchip: Enable RTC support for Rock 5B")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230414125425.124994-2-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the device tree entries for the PWM controller
present on M2 macbooks that is connected to the keyboard backlight.
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Adds PWM controller and keyboard backlight bindings for M1 MacBooks
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
-----BEGIN PGP SIGNATURE-----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=vVPv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HFrk
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
-----BEGIN PGP SIGNATURE-----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=vioZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5eCIACgkQYKtH/8kJ
UifNLg/+Mu/sNCH2A0pIjolcR7Umn0Uvx9frZiusZdACa4+hA2N8EVj1NV3MW4z3
SvcwWy+ALDy6CjYzBbMFQYrVpu46TEjBvDNMgh4VA73bVemJg5F8WXoFRv6IaXXT
XUzJVm5GbPbCkLXHemxs+MEgHanNAqHZfGRN+hMxaKy9kxqrxZq60IYIw90t1eJk
NH/QbPcq0ck3WHwaVZluxCGCdb+ApiL5uHbsKfrDDcG6iUgu0LBw8moseb0e2tJp
HJhNTYaFC7VLsx+IUD3zBUtMyVNT28A3hwfuqRDZ7ceVWOXd4Qu7ESJ9g/GaW33T
RgdC6rnEWhKYVXEgN2x8KR3aMymwzwKGKgWTlNldImWyVkIUhWCkMJ7uUU69oyCS
3z4D2jAMIZE80vCWPH+oORcCGOk8tn+KX1IK0kfEzgrRaBpCHvHvTUVs/b7RDHAi
MBr4FETixQXh49wmT4BvdKz1MsA9gKw2JZ0jYnO99uNLttMdRlwpO+4ZDP4uI4Jk
2TPILd4lGnyW5NcXc8muvDtPaooZO1l/8TIMThmfH9ITNPWD6jIhCa3VeJ6ntXSA
nXrAew9ZBKGQcJ4NFSXq2H8rP6aeBLUtmotPqx+PlW5w6Um7PjuRdcx0xPyvcKrh
t4v/o8KjPrLAQhAEg7PvmJA8bZqiZxvr2OBnJjRPMR58FKPThAo=
=4E45
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 6.4, please pull the following:
- Rob fixes the GICv3 ITS node name for the Stingray platforms
- William adds the new-style High Speed SPI controller nodes to the BCA
SocS
- Rafal fixes the NAND controller interrupt name for BCM4908, LED
node(s) and procmon for BCM4908. He also adds support for the USB
ports, and declares USB triggered LEDs for the Netgear R8000P and
TP-Link C2300.
* tag 'arm-soc/for-6.4/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB LED triggers
arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
arm64: dts: broadcom: bcmbca: bcm4908: fix procmon nodename
arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name
arm64: dts: broadcom: bcmbca: Add spi controller node
arm64: dts: broadcom: stringray: Fix GICv3 ITS node name
Link: https://lore.kernel.org/r/20230410232606.1917803-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
-----BEGIN PGP SIGNATURE-----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=ZyN2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OcHF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO9eAAKCRCKwlD9ZEnx
cDqrAP4wBrYlD0ih3wMZbcrHAZpIfhLLLlUBDT0JfYYy/mSGXwEA69C5A00Gx47o
R4eLM6rSfPKw4KNJcLFwO5eqMsPzEQs=
=uYv8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UIZB
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxOOAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6mqwf8CYJZwCv3TEUHtV8U8wKnQddPPeyo
M62FQYTS2NBcLNPv3wqus3QaED2AmuY9ibFG/R7CBpNgs89QtTJfGbGrQnFea9Kt
ylXVHj4OtF0edAG1YpRfg+1kWx1If61OO1yuVGxbGZEwCgVMkBVQfNgTT+awZWOX
CCAe9m6TM7mNWMPoIrymaUuTFQDkG9WisSyafAdQUBVRaIUpYzWVkBLK130mpxLo
/J4jYv58beoZmd4eh942c5Ui8SYg0bGmxNdrtsvsmE7IWRkB77JxFgVrh6OokS70
c+zBU+9epWBRW4d7J4QCHCNhlXqKPF6XHuxeW8Q0OxvC/sLCSTK2QD7puQ==
=aFxm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8OCT
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
-----BEGIN PGP SIGNATURE-----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=qCDN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xfIt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=GkR1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kJMa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This smartphone features a Bosch BMM050 Magnetometer on I2C3: enable
it with the BMM150 binding, as that driver supports BMM050 as well.
For this sensor, there is no interrupt pin;
readings were validated in sysfs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-28-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
not display specific and can be used as a generic PWM controller.
This node is left disabled as usage is board-specific.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230412112739.160376-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In prepration for adding the IOMMUs and LARBs of this SoC, add the
VDECSYS and VENCSYS clock controller nodes, providing clocks for the
vcodec stateful decoder and stateful decoder hardware.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230327083647.22017-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add DTS for Qualcomm qrb4210-rb2 board which uses SM4250 SoC.
This adds debug uart, emmc, uSD and tlmm support along with
regulators found on this board.
Also defines the 'xo_board' and 'sleep_clk' frequencies for
this board.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Squashed separate patch specifying regulator-system-load]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411072840.2751813-3-bhupesh.sharma@linaro.org
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with
indices matching downstream DTS, to make any comparisons easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230405061129.143553-1-krzysztof.kozlowski@linaro.org
SM8250 has (at least) four GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 II (speed bin 0x7)
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-5-2dede22dd7f7@linaro.org
SM8150 has (at least) two GPU speed bins. With the support added on the
driver side, wire up bin detection in the DTS to restrict lower-quality
SKUs from running at frequencies they were not validated at.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 (speed bin 0x3)
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-4-2dede22dd7f7@linaro.org
Now that there's display support, there is no reason to assume the default
mode for Adreno should be headless. Keep it like that for boards that
previously enabled it, so as not to create regressions though.
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-3-2dede22dd7f7@linaro.org
Add the initial device tree support for the Reference Design
Platform(RDP) 468 based on IPQ5332 family of SoCs. This patch carries the
support for Console UART, SPI NOR, eMMC.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323093120.20558-3-quic_kathirav@quicinc.com
The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared
by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not
in DSI0.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407192605.168666-1-krzysztof.kozlowski@linaro.org
Add a node for RMTFS and associate it with MSA and NAV IDs to enable
modem functionality on SM6115.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-2-625d7cb4a944@linaro.org
Bindings require pin configuration nodes to have the function, even if
it is GPIO:
msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed:
'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-1-krzysztof.kozlowski@linaro.org
Add nodes for remoteproc, smp2p and smsm in preparation
for audio support on this platform.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407165345.42800-4-a39.skl@gmail.com
Add nodes for remoteproc, smp2p and smsm to make it possible to use
modem functionality on this platform.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407165345.42800-3-a39.skl@gmail.com
Add nodes for remoteproc, smp2p and smsm to make it possible to use
wifi/bt functionality on this platform.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407165345.42800-2-a39.skl@gmail.com
