Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:
net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
663 | }
| ^
1 error generated.
On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:
net/ipv4/tcp_output.c:663:2: error: expected statement
}
^
1 error generated.
While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32bea ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.
The specific sequence of steps is:
1. tg3_start_xmit() is called at least once and queues packet(s) without
updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
called.
3. tg3_tso_bug() determines that the SKB is too large, ...
if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {
... stops the queue, and returns NETDEV_TX_BUSY:
netif_tx_stop_queue(txq);
...
if (tg3_tx_avail(tnapi) <= frag_cnt_est)
return NETDEV_TX_BUSY;
4. Since all tg3_tso_bug() call sites directly return, the code updating
tnapi->prodmbox is skipped.
5. The queue is stuck now. tg3_start_xmit() is not called while the queue
is stopped. The NIC is not processing new packets because
tnapi->prodmbox wasn't updated. tg3_tx() is not called by
tg3_poll_work() because the all TX descriptions that could be freed has
been freed:
/* run TX completion thread */
if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
tg3_tx(tnapi);
6. Eventually, dev_watchdog() fires triggering a reset of the queue.
This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 'weed' with 'we' in the comment.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZUpEaAAKCRCRxhvAZXjc
ounBAQCAoS66gnOZ+k4kOWwB2zZ1Ueh3dPFC7IcEZ+pwFS8hpAEAxUQxV0TSWf5l
W/1oKRtAJyuSYvehHeMUSJmHVBiM8w4=
=bNm0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZUoJCwAKCRCRxhvAZXjc
op1dAQCyPoR7cEU1ThHfBkUFso/M10izobPmBy9g+mdZavxqQgEApFxbbUqPP2R8
6qe6VFDSQKu5S3sf8IgUMQqkzHnOcwg=
=qMvH
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap maintainership rotation from Christian Brauner:
"As discussed on list last week this makes fs/iomap part of vfs.git
with Darrick as main reviewer"
* tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: rename iomap entry
iomap: rotate maintainers
- Don't update inode timestamps for direct writes (performance regression fix).
- Skip no-op quota records instead of panicing.
- Fix a RCU race in gfs2_permission().
- Various other smaller fixes and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=YfOA
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.6-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Don't update inode timestamps for direct writes (performance
regression fix)
- Skip no-op quota records instead of panicing
- Fix a RCU race in gfs2_permission()
- Various other smaller fixes and cleanups all over the place
* tag 'gfs2-v6.6-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (24 commits)
gfs2: don't withdraw if init_threads() got interrupted
gfs2: remove dead code in add_to_queue
gfs2: Fix slab-use-after-free in gfs2_qd_dealloc
gfs2: Silence "suspicious RCU usage in gfs2_permission" warning
gfs2: fs: derive f_fsid from s_uuid
gfs2: No longer use 'extern' in function declarations
gfs2: Rename gfs2_lookup_{ simple => meta }
gfs2: Convert gfs2_internal_read to folios
gfs2: Convert stuffed_readpage to folios
gfs2: Minor gfs2_write_jdata_batch PAGE_SIZE cleanup
gfs2: Get rid of gfs2_alloc_blocks generation parameter
gfs2: Add metapath_dibh helper
gfs2: Clean up quota.c:print_message
gfs2: Clean up gfs2_alloc_parms initializers
gfs2: Two quota=account mode fixes
gfs2: Stop using GFS2_BASIC_BLOCK and GFS2_BASIC_BLOCK_SHIFT
gfs2: setattr_chown: Add missing initialization
gfs2: fix an oops in gfs2_permission
gfs2: ignore negated quota changes
gfs2: Don't update inode timestamps for direct writes
...
-----BEGIN PGP SIGNATURE-----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=MPCb
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Overlayfs aio cleanups and fixes
Cleanups and minor fixes in preparation for factoring out of
read/write passthrough code.
- Overlayfs lock ordering changes
Hold mnt_writers only throughout copy up instead of a long lived
elevated refcount.
- Add support for nesting overlayfs private xattrs
There are cases where you want to use an overlayfs mount as a
lowerdir for another overlayfs mount. For example, if the system
rootfs is on overlayfs due to composefs, or to make it volatile (via
tmpfs), then you cannot currently store a lowerdir on the rootfs,
because the inner overlayfs will eat all the whiteouts and overlay
xattrs. This means you can't e.g. store on the rootfs a prepared
container image for use with overlayfs.
This adds support for nesting of overlayfs mounts by escaping the
problematic features and unescaping them when exposing to the
overlayfs user.
- Add new mount options for appending lowerdirs
* tag 'ovl-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: add support for appending lowerdirs one by one
ovl: refactor layer parsing helpers
ovl: store and show the user provided lowerdir mount option
ovl: remove unused code in lowerdir param parsing
ovl: Add documentation on nesting of overlayfs mounts
ovl: Add an alternative type of whiteout
ovl: Support escaped overlay.* xattrs
ovl: Add OVL_XATTR_TRUSTED/USER_PREFIX_LEN macros
ovl: Move xattr support to new xattrs.c file
ovl: do not encode lower fh with upper sb_writers held
ovl: do not open/llseek lower file with upper sb_writers held
ovl: reorder ovl_want_write() after ovl_inode_lock()
ovl: split ovl_want_write() into two helpers
ovl: add helper ovl_file_modified()
ovl: protect copying of realinode attributes to ovl inode
ovl: punt write aio completion to workqueue
ovl: propagate IOCB_APPEND flag on writes to realfile
ovl: use simpler function to convert iocb to rw flags
Merge cpupower utility update for 6.7-rc1:
- Fix a reference to a removed document in the cpupower utility
documentation (Vegard Nossum).
* pm-tools:
cpupower: fix reference to nonexistent document
Here's the second big bcachefs pull request. This brings your tree up to
date with my master branch, which is what existing bcachefs users are
currently running.
All but the last few patches have been in linux-next, those being small
fixes. Test results from my dashboard:
https://evilpiepirate.org/~testdashboard/ci?commit=c7046ed0cf9bb33599aa7e72e7b67bba4be42d64
New features:
- rebalance_work btree (and metadata version 1.3): the rebalance thread
no longer has to scan to find extents that need processing - big
scalability improvement.
- sb_errors superblock section: this adds counters for each fsck error
type, since filesystem creation, along with the date of the most
recent error. It'll get us better bug reports (since users do not
typically report errors that fsck was able to fix), and I might add
telemetry for this in the future.
Fixes include:
- multiple snapshot deletion fixes
- members_v2 fixups
- deleted_inodes btree fixes
- copygc thread no longer spins when a device is full but has no
fragmented buckets (i.e. rebalance needs to move data around instead)
- a fix for a memory reclaim issue with the btree key cache: we're now
careful not to hold the srcu read lock that blocks key cache reclaim
for too long
- an early allocator locking fix, from Brian
- endianness fixes, from Brian
- CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
performance improvement on multithreaded workloads
-----BEGIN PGP SIGNATURE-----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=Lo4N
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Here's the second big bcachefs pull request. This brings your tree up
to date with my master branch, which is what existing bcachefs users
are currently running.
New features:
- rebalance_work btree (and metadata version 1.3): the rebalance
thread no longer has to scan to find extents that need processing -
big scalability improvement.
- sb_errors superblock section: this adds counters for each fsck
error type, since filesystem creation, along with the date of the
most recent error. It'll get us better bug reports (since users do
not typically report errors that fsck was able to fix), and I might
add telemetry for this in the future.
Fixes include:
- multiple snapshot deletion fixes
- members_v2 fixups
- deleted_inodes btree fixes
- copygc thread no longer spins when a device is full but has no
fragmented buckets (i.e. rebalance needs to move data around
instead)
- a fix for a memory reclaim issue with the btree key cache: we're
now careful not to hold the srcu read lock that blocks key cache
reclaim for too long
- an early allocator locking fix, from Brian
- endianness fixes, from Brian
- CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
performance improvement on multithreaded workloads"
* tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits)
bcachefs: Improve stripe checksum error message
bcachefs: Simplify, fix bch2_backpointer_get_key()
bcachefs: kill thing_it_points_to arg to backpointer_not_found()
bcachefs: bch2_ec_read_extent() now takes btree_trans
bcachefs: bch2_stripe_to_text() now prints ptr gens
bcachefs: Don't iterate over journal entries just for btree roots
bcachefs: Break up bch2_journal_write()
bcachefs: Replace ERANGE with private error codes
bcachefs: bkey_copy() is no longer a macro
bcachefs: x-macro-ify inode flags enum
bcachefs: Convert bch2_fs_open() to darray
bcachefs: Move __bch2_members_v2_get_mut to sb-members.h
bcachefs: bch2_prt_datetime()
bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y
bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage
bcachefs: rebalance_work btree is not a snapshots btree
bcachefs: Add missing printk newlines
bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry
bcachefs: .get_parent() should return an error pointer
bcachefs: Fix bch2_delete_dead_inodes()
...
When only the keyring module is included but auth is not, modpost
complains about the lack of a module license tag:
ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o
Address this by making both modules buildable standalone,
removing the now unnecessary CONFIG_NVME_COMMON symbol
in the process.
Also, now that NVME_KEYRING config symbol can be either a module or
built-in, the stubs need to check for '#if IS_ENABLED' rather than a
simple '#ifdef'.
Fixes: 9d77eb5277 ("nvme-keyring: register '.nvme' keyring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The cache ops are also used by the pmem code which is unconditionally
built into the kernel. Move them into a separate file that is built
based on the correct config option.
Fixes: fd96278127 ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> #
Link: https://lore.kernel.org/r/20231028155101.1039049-1-hch@lst.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e4670 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4af5f2e030 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().
Fix this by implementing ->free_disk and free private data in it.
Fixes: 4af5f2e030 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the exportfs entry from the nfsd entry and add myself as reviewer.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231026205553.143556-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: d7133797e9 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to a flaw in the hardware design, the GL9755 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9755
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: 36ed2fd32b ("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since this is now part of the vfs trees rename it accordingly and remove
the old tree referencing xfs.
Signed-off-by: Christian Brauner <brauner@kernel.org>
As JITTERENTROPY is selected by default if you enable the CRYPTO
API, any Kconfig options added there will show up for every single
user. Hide the esoteric options under EXPERT as well as FIPS so
that only distro makers will see them.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This series optimizes the tlb flushes on riscv which used to simply
flush the whole tlb whatever the size of the range to flush or the size
of the stride.
Patch 3 introduces a threshold that is microarchitecture specific and
will very likely be modified by vendors, not sure though which mechanism
we'll use to do that (dt? alternatives? vendor initialization code?).
* b4-shazam-merge:
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
Link: https://lore.kernel.org/r/20231030133027.19542-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form,
when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the
whole tlb: so set a stride of the size of the hugetlb mapping in order to
only flush the hugetlb mapping. However, if the hugepage is a NAPOT region,
all PTEs that constitute this mapping must be invalidated, so the stride
size must actually be the size of the PTE.
Note that THPs are directly handled by flush_pmd_tlb_range().
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.
This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).
The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a drop rule on a VF, rule direction is not being set, which
results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS
equals 0). Because of this, drop rules added on port representors don't
match any packets.
To fix it, set rule direction in drop action to egress when netdev is a
port representor, otherwise set it to ingress.
Fixes: 0960a27bd4 ("ice: Add direction metadata")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Any packet leaving VSI i.e VF's VSI is considered as
egress traffic by HW, thus failing to match the added
rule.
Mark the direction for redirect rules as below:
1. VF-VF - Egress
2. Uplink-VF - Ingress
3. VF-Uplink - Egress
4. Link_Partner-Uplink - Ingress
5. Link_Partner-VF - Ingress
Fixes: 0960a27bd4 ("ice: Add direction metadata")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sleeping is not allowed in RCU read-side critical sections.
Use atomic allocations under rcu_read_lock.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Fixes: 41ccedf5ca ("ice: implement lag netdev event handler")
Fixes: 3579aa86fb ("ice: update reset path for SRIOV LAG support")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an attribute of an aggregate interface disqualifies it from supporting
SRIOV, the driver will unwind the SRIOV support. Currently the driver is
clearing the feature bit for all interfaces in the aggregate, but this is
not allowing the other interfaces to unwind successfully on driver unload.
Only clear the feature bit for the interface that is currently unwinding.
Fixes: bf65da2eb2 ("ice: enforce interface eligibility and add messaging for SRIOV LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This adds a separate segment for kernel text in /proc/kcore, which has a
different address than the direct linear map.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmh6m758ao.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Do not call devlink_port_type_clear() prior devlink port unregister
and let devlink core to take care about it.
Reproducer:
[root@host ~]# rmmod i40e
[ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel?
[ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel?
Fixes: 9e479d64dc ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
When doing a multishot read, the code path reuses the old read
paths. However this breaks an assumption built into those paths,
namely that struct io_rw::len is available for reuse by __io_import_iovec.
For multishot this results in len being set for the first receive
call, and then subsequent calls are clamped to that buffer length
incorrectly.
Instead keep len as zero after recycling buffers, to reuse the full
buffer size of the next selected buffer.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-4-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For addr: this field is not used, since buffer select is forced.
But by forcing it to be zero it leaves open future uses of the field.
len is actually usable, you could imagine that you want to receive
multishot up to a certain length.
However right now this is not how it is implemented, and it seems
safer to force this to be zero.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-3-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can be useful to know if io_kbuf_recycle did actually recycle the
buffer on the request, or if it left the request alone.
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-2-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some data were incorrectly annotated with SYM_FUNC_*() instead of
SYM_DATA_*() ones. Use the correct ones.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ENTRY()/END()/WEAK() macros are deprecated and we should make use of the
new SYM_*() macros [1] for better annotation of symbols. Replace the
deprecated ones with the new ones and fix wrong usage of END()/ENDPROC()
to correctly describe the symbols.
[1] https://docs.kernel.org/core-api/asm-annotations.html
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For the sake of coherency, use local labels in assembly when
applicable. This also avoid kprobes being confused when applying a
kprobe since the size of function is computed by checking where the
next visible symbol is located. This might end up in computing some
function size to be way shorter than expected and thus failing to apply
kprobes to the specified offset.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231024132655.730417-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When flashing loader.bin for K210 using kflash:
[ERROR] This is an ELF file and cannot be programmed to flash directly: arch/riscv/boot/loader.bin
Before, loader.bin relied on "OBJCOPYFLAGS := -O binary" in the main
RISC-V Makefile to create a boot image with the right format. With this
removed, the image is now created in the wrong (ELF) format.
Fix this by adding an explicit rule.
Fixes: 505b02957e ("riscv: Remove duplicate objcopy flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/1086025809583809538dfecaa899892218f44e7e.1698159066.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Setting up I/O queues might take quite some time on larger and/or
busy setups, so KATO might expire before all I/O queues could be
set up.
Fix this by start keep alive from the ->init_ctrl_finish() callback,
and stopping it when calling nvme_cancel_admin_tagset().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
[fixed nvme-fc compile error]
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch corrects the comment for the kdballocenv function.
The previous comment incorrectly described the function's
parameters and return values.
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Link: https://lore.kernel.org/r/DB3PR10MB6835B383B596133EDECEA98AE8ABA@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COM
[daniel.thompson@linaro.org: fixed whitespace alignment in new lines]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Once ->init_ctrl_finish() is called there may be commands outstanding,
so we should quiesce the admin queue and cancel all commands prior
to call nvme_loop_destroy_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_tcp_setup_ctrl() has an open-coded version of
nvme_tcp_teardown_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently a seqnum of zero is sent during uni-directional
authentication. The zero value is reserved for the secure channel
feature which is not yet implemented.
Relevant extract from the spec:
The value 0h is used to indicate that bidirectional authentication
is not performed, but a challenge value C2 is carried in order to
generate a pre-shared key (PSK) for subsequent establishment of a
secure channel
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Introduces an explicit variable for bi-directional auth.
The currently used variable chap->s2 is incorrectly zeroed for
uni-directional auth. That will be fixed in the next patch so this
needs to change to avoid sending unexpected success2 messages
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
In cases where RVALID is false, the response is still transmitted,
but is cleared to zero.
Relevant extract from the spec:
Response R2, if valid (i.e., if the RVALID field is set to 01h),
cleared to 0h otherwise
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
