The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.
Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.
Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.
Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.
Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.
In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important. Given that, it
makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.
Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.
As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.
In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.
Given that, it makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
Generic unified P2020 machine description which supports all P2020-based
boards is now in separate file p2020.c. So create a separate config option
CONFIG_PPC_P2020 for it.
Previously machine descriptions for P2020 boards were enabled by
CONFIG_MPC85xx_DS or CONFIG_MPC85xx_RDB option. So set CONFIG_PPC_P2020 to
be enabled by default when one of those option is enabled.
This allows to compile support for P2020 boards without need to have
enabled support for older mpc85xx boards. And to compile kernel for old
mpc85xx boards without having enabled support for new P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-13-pali@kernel.org
Combine machine descriptions and code of all P2020 boards into just one
generic unified P2020 machine description. This allows kernel to boot on
any P2020-based board with P2020 DTS file without need to patch kernel and
define a new machine description in 85xx powerpc platform directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-12-pali@kernel.org
Make just one .setup_arch and one .init_IRQ callback implementation for all
P2020 board code. This deduplicate repeated and same code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-11-pali@kernel.org
In order to share mpc85xx i8259 code between DS and P2020.
Prefix i8259 debug and error messages by i8259 word.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix some coding style warnings in the moved code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-10-pali@kernel.org
This moves P2020 RDB machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-9-pali@kernel.org
This moves P2020 DS machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-8-pali@kernel.org
mpc85xx_qe_par_io_init() is a stub when CONFIG_QUICC_ENGINE is not set.
CONFIG_UCC_GETH and CONFIG_SERIAL_QE depend on CONFIG_QUICC_ENGINE.
Remove #ifdef CONFIG_QUICC_ENGINE
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-7-pali@kernel.org
All necessary items are declared all the time, no need to use
a #ifdef CONFIG_PPC_I8259.
Refactor CONFIG_PPC_I8259 actions into a dedicated init function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-6-pali@kernel.org
Use pr_debug() instead of printk(KERN_DEBUG
Use pr_err() instead of printk(KERN_ERR
Use pr_info() instead of printk(KERN_INFO or printk("
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-5-pali@kernel.org
No need to BUG() in case mpic_alloc() fails. Use WARN_ON().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-4-pali@kernel.org
Reduce number of lines in the call to mpic_alloc().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-3-pali@kernel.org
DBG() macro is defined at three places while used only
one time at one place.
Replace its only use by a pr_debug() and remove the macro.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-2-pali@kernel.org
Boards provided by CONFIG_MPC85xx_RDB option do not initialize
fsl_uli1575.c driver. So remove explicit select dependency on it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-6-pali@kernel.org
Move uli_init() function into existing driver fsl_uli1575.c file in order
to share its code between more platforms and board files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-5-pali@kernel.org
Function uli_exclude_device() is called only from mpc86xx_exclude_device()
and mpc85xx_exclude_device() functions. Both those functions are same, so
merge its logic directly into the uli_exclude_device() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-4-pali@kernel.org
Function mpc85xx_exclude_device() is installed and used only when
pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by
fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable
declaration into function mpc85xx_ds_uli_init() where it is used.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-3-pali@kernel.org
Use a single line for uli_exclude_device().
Add uli_exclude_device() prototype in ppc-pci.h and guard it.
Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files.
Make uli_pirq_to_irq[] static as it is used only in that file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-2-pali@kernel.org
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
Use the new 'compatible' property for simple cases.
checkpatch complains about the new compatible being undocumented
but in reality nothing is new so just ignore it for the time
being.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
This patch converts the driver to newer gpiod API, and away from
OF-specific legacy gpio API that we want to stop using.
While at it, let's address a few more issues:
- switch to using dev_info()/pr_info() and friends
- cancel work when unbinding the driver
Note that the original code handled halt GPIO polarity incorrectly:
in halt callback, when line polarity is "low" it would set trigger to
"1" and drive halt line high, which is counter to the annotation.
gpiod API will drive such line low. However I do not see any DTSes
in mainline that have a DT node with "sgy,gpio-halt" compatible.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzNNznewTyCJiGFz@google.com
e500 idle setup is a bit messy.
e500_idle() is used for PPC32 while book3e_idle() is used for PPC64.
As they are mutually exclusive, call them all e500_idle().
Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename
idle_e500.c to idle_85xx.c .
Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in
as it's only built on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need
to select it again by PPC_QEMU_E500 and CORENET_GENERIC
as they depend on PPC_85xx || PPC_BOOK3E_64.
PPC_BOOK3E_64 already selects E500MC so no need to
select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64
is the only way into PPC_QEMU_E500 with PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/44f03fa1506892fabf626dceb2f47a049908b6af.1663606876.git.christophe.leroy@csgroup.eu
for_each_node_by_type() will automatically increase and decrease
the refcount during the iteration. However, there is a reference
escaped into global 'fsl_pci_primary' and we need to handle it.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com
In gpio_halt_probe(), of_find_matching_node() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() in the failure path.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617105011.4041123-1-windhl@126.com
In ksi8560_setup_arch(), of_find_compatible_node() will return a
node pointer with refcount incremented. The reference should be dropped
with of_node_put() when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616132922.3987053-1-windhl@126.com
More MPC85xx and P1/P2 boards options have incorrect description. Fix them
to include list of all boards for which they enable/disable support.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220709124305.17559-1-pali@kernel.org
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
In smp_85xx_start_cpu() we are passed an address but we're unsure if
it's a real or virtual address, so there's a check to determine that.
The check has an off-by-one in that it tests if the address is greater
than high_memory, but high_memory is the first address of high memory,
so the check should be greater-or-equal.
It seems this has never been a problem in practice, but it also triggers
the DEBUG_VIRTUAL checks in __pa() which we would like to avoid. We can
fix both issues by converting high_memory - 1 to a physical address and
testing against that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-3-mpe@ellerman.id.au
This means an idle guest won't needlessly consume an entire core on
the host, waiting for work to show up.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220112112459.1033754-1-troglobit@gmail.com
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
Some functions defined in 'arch/powerpc/platforms/85xx' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-19-nick.child@ibm.com
Fixes the following W=1 warning:
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-1-mpe@ellerman.id.au
When CONFIG_FSL_PMC is set to n, no value is assigned to cpu_up_prepare
in the mpc85xx_pm_ops structure. As a result, oops is triggered in
smp_85xx_start_cpu().
smp: Bringing up secondary CPUs ...
kernel tried to execute user page (0) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch (NULL pointer?)
Faulting instruction address: 0x00000000
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [00000000] 0x0
LR [c0021d2c] smp_85xx_kick_cpu+0xe8/0x568
Call Trace:
[c1051da8] [c0021cb8] smp_85xx_kick_cpu+0x74/0x568 (unreliable)
[c1051de8] [c0011460] __cpu_up+0xc0/0x228
[c1051e18] [c0031bbc] bringup_cpu+0x30/0x224
[c1051e48] [c0031f3c] cpu_up.constprop.0+0x180/0x33c
[c1051e88] [c00322e8] bringup_nonboot_cpus+0x88/0xc8
[c1051eb8] [c07e67bc] smp_init+0x30/0x78
[c1051ed8] [c07d9e28] kernel_init_freeable+0x118/0x2a8
[c1051f18] [c00032d8] kernel_init+0x14/0x124
[c1051f38] [c0010278] ret_from_kernel_thread+0x14/0x1c
Fixes: c45361abb9 ("powerpc/85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n")
Reported-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Tested-by: Martin Kennedy <hurricos@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211126041153.16926-1-nixiaoming@huawei.com
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
The support was for this was mainlined 13 years ago, in v2.6.25
[0e0fffe887] just around the ppc --> powerpc migration.
I believe the board was introduced a year or two before that, so it
is roughly a 15 year old platform - with the CPU speed and memory size
that was typical for that era.
I haven't had one of these boards for several years, and availability
was discontinued several years before that.
Given that, there is no point in adding a burden to testing coverage
that builds all possible defconfigs, so it makes sense to remove it.
Of course it will remain in the git history forever, for anyone who
happens to find a functional board and wants to tinker with it.
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the clang build of corenet64_smp_defconfig fails with:
arch/powerpc/platforms/85xx/corenet_generic.c:210:1: error:
attribute declaration must precede definition
machine_arch_initcall(corenet_generic, corenet_gen_publish_devices);
Fix it by moving the initcall definition prior to the machine
definition, and directly below the function it calls, which is the
usual style anyway.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023020838.3274226-1-mpe@ellerman.id.au
We have smp_ops->cpu_die() and ppc_md.cpu_die(). One of them offlines
the current CPU and one offlines another CPU, can you guess which is
which? Also one is in smp_ops and one is in ppc_md?
So rename ppc_md.cpu_die(), to cpu_offline_self(), because that's what
it does. And move it into smp_ops where it belongs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015634.1974478-3-mpe@ellerman.id.au
