mirror of
https://github.com/torvalds/linux
synced 2024-10-07 03:42:55 +00:00
6165 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Saravana Kannan
|
6442d79d88 |
driver core: fw_devlink: Improve detection of overlapping cycles
fw_devlink can detect most overlapping/intersecting cycles. However it was
missing a few corner cases because of an incorrect optimization logic that
tries to avoid repeating cycle detection for devices that are already
marked as part of a cycle.
Here's an example provided by Xu Yang (edited for clarity):
usb
+-----+
tcpc | |
+-----+ | +--|
| |----------->|EP|
|--+ | | +--|
|EP|<-----------| |
|--+ | | B |
| | +-----+
| A | |
+-----+ |
^ +-----+ |
| | | |
+-----| C |<--+
| |
+-----+
usb-phy
Node A (tcpc) will be populated as device 1-0050.
Node B (usb) will be populated as device 38100000.usb.
Node C (usb-phy) will be populated as device 381f0040.usb-phy.
The description below uses the notation:
consumer --> supplier
child ==> parent
1. Node C is populated as device C. No cycles detected because cycle
detection is only run when a fwnode link is converted to a device link.
2. Node B is populated as device B. As we convert B --> C into a device
link we run cycle detection and find and mark the device link/fwnode
link cycle:
C--> A --> B.EP ==> B --> C
3. Node A is populated as device A. As we convert C --> A into a device
link, we see it's already part of a cycle (from step 2) and don't run
cycle detection. Thus we miss detecting the cycle:
A --> B.EP ==> B --> A.EP ==> A
Looking at it another way, A depends on B in one way:
A --> B.EP ==> B
But B depends on A in two ways and we only detect the first:
B --> C --> A
B --> A.EP ==> A
To detect both of these, we remove the incorrect optimization attempt in
step 3 and run cycle detection even if the fwnode link from which the
device link is being created has already been marked as part of a cycle.
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/lkml/DU2PR04MB8822693748725F85DC0CB86C8C792@DU2PR04MB8822.eurprd04.prod.outlook.com/
Fixes:
|
||
|
Saravana Kannan
|
7fddac12c3 |
driver core: Fix device_link_flag_is_sync_state_only()
device_link_flag_is_sync_state_only() correctly returns true on the flags
of an existing device link that only implements sync_state() functionality.
However, it incorrectly and confusingly returns false if it's called with
DL_FLAG_SYNC_STATE_ONLY.
This bug doesn't manifest in any of the existing calls to this function,
but fix this confusing behavior to avoid future bugs.
Fixes:
|
||
|
Vincent Guittot
|
98323e9d70 |
topology: Set capacity_freq_ref in all cases
If "capacity-dmips-mhz" is not set, raw_capacity is null and we skip the
normalization step which includes setting per_cpu capacity_freq_ref.
Always register the notifier but skip the capacity normalization if
raw_capacity is null.
Fixes:
|
||
|
Randy Dunlap
|
f297a3844a |
driver core: component: fix spellos
Correct spelling mistakes reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/r/20240107055750.22441-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
3a480d4bb5 |
driver core: cpu: make cpu_subsys const
Now that the driver core can properly handle constant struct bus_type, move the cpu_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2024010548-crane-snooze-a871@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafael J. Wysocki
|
9cb1c9820f |
PM: sleep: Relocate two device PM core functions
Move is_async() and dpm_async_fn() in the PM core to a more suitable place. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> |
||
|
Rafael J. Wysocki
|
86686b8f7a |
PM: sleep: Simplify dpm_suspended_list walk in dpm_resume()
Notice that devices can be moved to dpm_prepared_list before running their resume callbacks, in analogy with dpm_noirq_resume_devices() and dpm_resume_early(), because doing so will not affect the final ordering of that list. Namely, if a device is the first dpm_suspended_list entry while dpm_list_mtx is held, it has not been removed so far and it cannot be removed until dpm_list_mtx is released, so moving it to dpm_prepared_list at that point is valid. If it is removed later, while its resume callback is running, it will be deleted from dpm_prepared_list without changing the ordering of the other devices in that list. Accordingly, rearrange the while () loop in dpm_resume() to move devices to dpm_prepared_list before running their resume callbacks and implify the locking and device reference counting in it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> |
||
|
Linus Torvalds
|
378de6df19 |
RTC for 6.8
Subsytem: New driver: - Analog Devices MAX31335 - Nuvoton ma35d1 - Texas Instrument TPS6594 PMIC RTC Drivers: - cmos: use ACPI alarm instead of HPET on recent AMD platforms - nuvoton: add NCT3015Y-R and NCT3018Y-R support - rv8803: proper suspend/resume and wakeup-source support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmWpkqQACgkQY6TcMGxw OjJ2eQ//cDaUPgvOUQ2+qQiZOyOrjnck+QEyXZr2mcnNfRnMPiafJX09v3W4BMPh 0oOVNF5BbGofTgJRnTC9BCRQnq8XZUwXaMr1B+mLQF4V9Xq3896pILkdRmd0q7EW 3qwKCNP1vkYx2hGyWB9wVAMESAdUIFHCLxJWeQZ3ESGUacMoON0cdFa96TUx4fKa m29ybMTHRHKpnZsIYpegxG42lWp84IPvTbtySbT52dr2ucLToVos/dX23juQ40D0 nyUa8Q+g6aLoTxjZPcFwK6dHJJIwWz56s40IbMRGr6dVfRis5QZfIQ/cB8ULj48L AkCtN6kptVsov/W2R9ZriTf5p53K7Fmwz+dhccW7SxA82cGyswWOD3BNzzOYnzPY pKSVeTnR7mD2IC28pGrekSpg3ExuNu/4+WHnz0EwpjgyXmtlxnfK6oV9nf8bIUsn JsY3tNOvenv8NQSQ1at3GugeQ4bGMbxay6pL9zm5EZjYGMDX0z7IcPFr9KeYC5tJ 60dYWCGuB2JF0WocuAXSNrj2l9VFFqhn7OdDVuiB00rBROQcKKV/H30EnmAwRUI1 8SZhVJ0TIeoG6XsajhbapvOH8EWUnKPn1mgJxSiyVR6Hz93oZldIPK3cUtfjcltx xl7LdVeseE1CXGh4g222CI0MCX6x1QPQ5L8jhgc67dyTUx/wQ4Q= =7u4i -----END PGP SIGNATURE----- Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There are three new drivers this cycle. Also the cmos driver is getting fixes for longstanding wakeup issues on AMD. New drivers: - Analog Devices MAX31335 - Nuvoton ma35d1 - Texas Instrument TPS6594 PMIC RTC Drivers: - cmos: use ACPI alarm instead of HPET on recent AMD platforms - nuvoton: add NCT3015Y-R and NCT3018Y-R support - rv8803: proper suspend/resume and wakeup-source support" * tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits) rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R rtc: da9063: Use dev_err_probe() rtc: da9063: Use device_get_match_data() rtc: da9063: Make IRQ as optional rtc: max31335: Fix comparison in max31335_volatile_reg() rtc: max31335: use regmap_update_bits_check rtc: max31335: remove unecessary locking rtc: max31335: add driver support dt-bindings: rtc: max31335: add max31335 bindings rtc: rv8803: add wakeup-source support rtc: ac100: remove misuses of kernel-doc rtc: class: Remove usage of the deprecated ida_simple_xx() API rtc: MAINTAINERS: drop Alessandro Zummo rtc: ma35d1: remove hardcoded UIE support dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example rtc: rv8803: Add power management support rtc: ds3232: avoid unused-const-variable warning rtc: lpc24xx: add missing dependency rtc: tps6594: Add driver for TPS6594 RTC rtc: Add driver for Nuvoton ma35d1 rtc controller ... |
||
|
Linus Torvalds
|
db5ccb9eb2 |
cxl for v6.8
- Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52 nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU= =HjCl -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "The bulk of this update is support for enumerating the performance capabilities of CXL memory targets and connecting that to a platform CXL memory QoS class. Some follow-on work remains to hook up this data into core-mm policy, but that is saved for v6.9. The next significant update is unifying how CXL event records (things like background scrub errors) are processed between so called "firmware first" and native error record retrieval. The CXL driver handler that processes the record retrieved from the device mailbox is now the handler for that same record format coming from an EFI/ACPI notification source. This also contains miscellaneous feature updates, like Get Timestamp, and other fixups. Summary: - Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups" * tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits) cxl/core: use sysfs_emit() for attr's _show() cxl/pci: Register for and process CPER events PCI: Introduce cleanup helpers for device reference counts and locks acpi/ghes: Process CXL Component Events cxl/events: Create a CXL event union cxl/events: Separate UUID from event structures cxl/events: Remove passing a UUID to known event traces cxl/events: Create common event UUID defines cxl/events: Promote CXL event structures to a core header cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe() cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge() cxl: Fix device reference leak in cxl_port_perf_data_calculate() cxl: Convert find_cxl_root() to return a 'struct cxl_root *' cxl: Introduce put_cxl_root() helper cxl/port: Fix missing target list lock cxl/port: Fix decoder initialization when nr_targets > interleave_ways cxl/region: fix x9 interleave typo cxl/trace: Pass UUID explicitly to event traces cxl/region: use %pap format to print resource_size_t cxl/region: Add dev_dbg() detail on failure to allocate HPA space ... |
||
|
Linus Torvalds
|
80955ae955 |
Driver core changes for 6.8-rc1
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing
major in here this release cycle, just lots of small cleanups and some
tweaks on kernfs that in the very end, got reverted and will come back
in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
If6wEoPLWvRfKx4gIoq9
=D96r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
||
|
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
|
Linus Torvalds
|
7b5bcf9b84 |
More power management updates for 6.8-rc1
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki).
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to run
at somewhat higher frequencies (Srinivas Pandruvada).
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer).
- Fix two PM-related typos in admin-guide (Erwan Velu).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmWmbv8SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx1WAQAIhCk6dhAy24waU8yIq+0vIxQgHNYhzq
ueo7Z2t+FcJbDmw4iesKVYvIUjMPntimzZb1lprUEqPS7HtRWmYEvh8WGSYPSKLH
PVS0F/AyIjyKP8+TKpstAKuRAwyeugWeUC1Gtnl3tKXIO4QgGL4NLC1makxy+gWq
jOz56wy7eyUiTblZBHcUjDHN0IUYLMkjZqmcYYAZ3IgwdPsXK4EdrjRqFBLwuvp4
Wm7Jbl6dM143vPWGAj8EtWo/e0bcIvhTOIghfR+dasTHtE9JABx94EicwQDzP1xl
7ZmoML2M6z6CO6cKt2w4udIIjSQDqnxfNIcmcqo3o5jb9IGiXQQad25mlWNdjD2d
iJDUUYo5VZHj6pIs+cI3dHLO1lELjylGY4hJ1DEMYnzd7GgfJlYEHiNJUS1QBjtF
nRXbv4gioKjsbrEhyBpV/fV2pM+o5gcz8iSGCT8njoq728XDsDJVspCeC0MLbkp4
GjNs18TxdyC5IO0sY1WC+ahWGN9igqAAlCrZeKfL+AG6dDOYV3rE4Ga9bIlI6EeM
1aymAzoEp4F1hTzBsuz3G+p+tLUjFIaRWao6K20Y8MsInnZmzogWCwH7pndXYPCu
AeiqfP6m4ChqdtwwrdRLVWT+xjllF9k7CcTMC0odxqxTq7tcvSyO/iOFQRMdRxRR
FlGklog4pI8z
=N3eJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These restore the asynchronous device resume optimization removed by
the previous PM merge, make the intel_pstate driver work better on
Meteor Lake systems, optimize the PM QoS core code slightly and fix up
typos in admin-guide.
Specifics:
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki)
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to
run at somewhat higher frequencies (Srinivas Pandruvada)
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer)
- Fix two PM-related typos in admin-guide (Erwan Velu)"
* tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Restore asynchronous device resume optimization
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
PM: QoS: Use kcalloc() instead of kzalloc()
|
||
|
Rafael J. Wysocki
|
9223614ea7 |
Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-qos' into pm
* pm-sleep: PM: sleep: Restore asynchronous device resume optimization * pm-cpufreq: Documentation: admin-guide: PM: Fix two typos cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake * pm-qos: PM: QoS: Use kcalloc() instead of kzalloc() |
||
|
Linus Torvalds
|
61da593f44 |
media updates for v6.8-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmWhMN0ACgkQCF8+vY7k 4RUNmw/9FNwS6woEDPUgoaqBqES5N1R/QzqqWgALQSiywUSWsAnHuALR7Aio4oH4 IMRrXn3nQpg1wj+f2OtVcXreuf1OMdD0WmQvcj/hcjGIx3mZUh2dBXJpR/iRrCRA jbGUDZqsiT9gPf6IcqspFccoShVjQDM7NKLa6xQMpwyITBAXhY0d5LPOs70VJO3f EH6wdJbhbQoocylSFCOl61un4Ebk/Zou2TDyzAAnIMQxmanVTWnRE9QL6G59t8PA XgTcSRiyQGdNScR8c/xgyHDj4KchvkwFHQfOAH+HPot6CIy+UsC02ofcBralTuN6 HTiJ8upj9U/N2ArX7L9w4xOFaRlXSO4MBTbQsroCgl7vkSfjMx/Ik5gHNVSoP25y MdLVg9ReW6D22tWnHvqpwbv4YPjT1uFX9LzuNtINwjJVC5Hn7EMPiE7hdsBGdKZE 98dVJKNMUHQT5KfEUqjDkdrcAYm5Pd46trEa1aMDnoxtshxlmwHYwUj0QNKVX2gT Wa5lw9twFvmvYPGFwIT11HrkFukj4zR7N7Eh0IOK93zjJl6gtr1UNmujj8KFXJS3 ZB4yTlcSgFunsmkyfcZ+02bgM9fq7SC1/rL9bXBYxdo2EcuduJ93Gr5riaQtVu44 6t6Gi8Ucf9Uh7B68Alf0GQAd+AhXPzbqtisHdYJb0ijGjRMhq7w= =KPPn -----END PGP SIGNATURE----- Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l core: subdev frame interval now supports which field - v4l kapi: moves and renames the init_cfg pad op to init_state as an internal op. - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900 - new camera driver: STM32 DCMIPP - s5p-mfc has gained MFC v12 support - new ISP driver added to staging: Starfive - new stateful encoder/decoded: Wave5 codec It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc. - fwnode gained support for MIPI "DisCo for Imaging" (https://www.mipi.org/specifications/mipi-disco-imaging) - as usual, lots of cleanups, fixups and driver improvements. * tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits) media: i2c: thp7312: select CONFIG_FW_LOADER media: i2c: mt9m114: use fsleep() in place of udelay() media: videobuf2: core: Rename min_buffers_needed field in vb2_queue media: i2c: thp7312: Store frame interval in subdev state media: docs: uAPI: Fix documentation of 'which' field for routing ioctls media: docs: uAPI: Expand error documentation for invalid 'which' value media: docs: uAPI: Clarify error documentation for invalid 'which' value media: v4l2-subdev: Store frame interval in subdev state media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF media: s5p-mfc: Load firmware for each run in MFCv12. media: s5p-mfc: Set context for valid case before calling try_run media: s5p-mfc: Add support for DMABUF for encoder media: s5p-mfc: Add support for UHD encoding. media: s5p-mfc: Add support for rate controls in MFCv12 media: s5p-mfc: Add YV12 and I420 multiplanar format support media: s5p-mfc: Add initial support for MFCv12 media: s5p-mfc: Rename IS_MFCV10 macro ... |
||
|
Linus Torvalds
|
0c4b09cb54 |
Core:
- Move the generic PM domain and its governor to the pmdomain subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd
-----BEGIN PGP SIGNATURE-----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=xSMR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
|
||
|
Linus Torvalds
|
3e7aeb78ab |
Networking changes for 6.8.
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
||
|
Linus Torvalds
|
78273df7f6 |
header cleanups for 6.8
The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies. Testing - it's been in -next, and fixes from pretty much all architectures have percolated in - nothing major. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmWfBwwACgkQE6szbY3K bnZPwBAAmuRojXaeWxi01IPIOehSGDe68vw44PR9glEMZvxdnZuPOdvE4/+245/L bRKU2WBCjBUokUbV9msIShwRkFTZAmEMPNfPAAsFMA+VXeDYHKB+ZRdwTggNAQ+I SG6fZgh5m0HsewCDxU8oqVHkjVq4fXn0cy+aL6xLEd9gu67GoBzX2pDieS2Kvy6j jnyoKTxFwb+LTQgph0P4EIpq5I2umAsdLwdSR8EJ+8e9NiNvMo1pI00Lx/ntAnFZ JftWUJcMy3TQ5u1GkyfQN9y/yThX1bZK5GvmHS9SJ2Dkacaus5d+xaKCHtRuFS1I 7C6b8PsNgRczUMumBXus44HdlNfNs1yU3lvVxFvBIPE1qC9pYRHrkWIXXIocXLLC oxTEJ6B2G3BQZVQgLIA4fOaxMVhmvKffi/aEZLi9vN9VVosd1a6XNKI6KbyRnXFp GSs9qDqszhn5I3GYNlDNQTc/8UsRlhPFgS6nS0By6QnvxtGi9QkU2tBRBsXvqwCy cLoCYIhc2tvugHvld70dz26umiJ4rnmxGlobStNoigDvIKAIUt1UmIdr1so8P8eH xehnL9ZcOX6xnANDL0AqMFFHV6I58CJynhFdUoXfVQf/DWLGX48mpi9LVNsYBzsI CAwVOAQ0UjGrpdWmJ9ueY/ABYqg9vRjzaDEXQ+MhAYO55CLaVsg= =3tyT -----END PGP SIGNATURE----- Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ... |
||
|
Rafael J. Wysocki
|
3e999770ac |
PM: sleep: Restore asynchronous device resume optimization
Before commit |
||
|
Linus Torvalds
|
7da71072e1 |
Power management updates for 6.8-rc1
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs to
the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui).
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov).
- Add Emerald Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Zhenguo Yao).
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada).
- Add a missing function return value check to the SCMI cpufreq driver
to avoid unexpected behavior (Alexandra Diupina).
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT).
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi).
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha).
- Fix possible deadlocks in the core system-wide PM code that occur if
device-handling functions cannot be executed asynchronously during
resume from system-wide suspend (Rafael J. Wysocki).
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming).
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng).
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang).
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan).
- Adjust documentation and code comments to reflect recent tasks freezer
changes (Kevin Hao).
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap).
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue).
- Use device_get_match_data() in the OPP code for TI (Rob Herring).
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=zh4c
-----END PGP SIGNATURE-----
Merge tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for new processors (Sierra Forest, Grand Ridge and
Meteor Lake) to the intel_idle driver, make intel_pstate run on
Emerald Rapids without HWP support and adjust it to utilize EPP values
supplied by the platform firmware, fix issues, clean up code and
improve documentation.
The most significant fix addresses deadlocks in the core system-wide
resume code that occur if async_schedule_dev() attempts to run its
argument function synchronously (for example, due to a memory
allocation failure). It rearranges the code in question which may
increase the system resume time in some cases, but this basically is a
removal of a premature optimization. That optimization will be added
back later, but properly this time.
Specifics:
- Add support for the Sierra Forest, Grand Ridge and Meteorlake SoCs
to the intel_idle cpuidle driver (Artem Bityutskiy, Zhang Rui)
- Do not enable interrupts when entering idle in the haltpoll cpuidle
driver (Borislav Petkov)
- Add Emerald Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Zhenguo Yao)
- Use EPP values programmed by the platform firmware as balanced
performance ones by default in intel_pstate (Srinivas Pandruvada)
- Add a missing function return value check to the SCMI cpufreq
driver to avoid unexpected behavior (Alexandra Diupina)
- Fix parameter type warning in the armada-8k cpufreq driver (Gregory
CLEMENT)
- Rework trans_stat_show() in the devfreq core code to avoid buffer
overflows (Christian Marangi)
- Synchronize devfreq_monitor_[start/stop] so as to prevent a timer
list corruption from occurring when devfreq governors are switched
frequently (Mukesh Ojha)
- Fix possible deadlocks in the core system-wide PM code that occur
if device-handling functions cannot be executed asynchronously
during resume from system-wide suspend (Rafael J. Wysocki)
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming)
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng)
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang)
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan)
- Adjust documentation and code comments to reflect recent tasks
freezer changes (Kevin Hao)
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap)
- Fix _set_required_opps when opp is NULL (Bryan O'Donoghue)
- Use device_get_match_data() in the OPP code for TI (Rob Herring)
- Clean up OPP level and other parts and call dev_pm_opp_set_opp()
recursively for required OPPs (Viresh Kumar)"
* tag 'pm-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
OPP: Rename 'rate_clk_single'
OPP: Pass rounded rate to _set_opp()
OPP: Relocate dev_pm_opp_sync_regulators()
PM: sleep: Fix possible deadlocks in core system-wide PM code
OPP: Move dev_pm_opp_icc_bw to internal opp.h
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
cpuidle: haltpoll: Do not enable interrupts when entering idle
OPP: Fix _set_required_opps when opp is NULL
OPP: The level field is always of unsigned int type
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
cpufreq: intel_pstate: Add Emerald Rapids support in no-HWP mode
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
intel_idle: add Sierra Forest SoC support
intel_idle: add Grand Ridge SoC support
PM / devfreq: Synchronize devfreq_monitor_[start/stop]
cpufreq: armada-8k: Fix parameter type warning
PM: hibernate: Enforce ordering during image compression/decompression
...
|
||
|
Linus Torvalds
|
83130ff423 |
regmap: Updates for v6.8
This was a very quiet release for regmap, we added kunit test coverage for a noinc fix that was merged during v6.7 and a couple of other trivial cleanups. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWbHBMACgkQJNaLcl1U h9BR8Af/RS9TYUkKvbBZGZSZIddhyENOOQ8EDGuxIPk+P2/gi1KaZeyTkxnUNUB/ noVNmHhcgfc0hATF/cBNuo7ASxjg58EadzR7FpJYyfCJ4rFFksEr3lKnuJqzU//8 nV91OBJf1iv2Y+UV1OdMTvcyo6Rew2K/5vcxMzRZ20RueIRaiMgBpZUEsgTgU6ol Zc2FJefdw9VrMfAYcdvrle14xzKfQdUJNkt76pcBG+P6Sus/5aUKrZskzOh6rOso MpQYvdtTfe6AxojWWZjOdzeeVJp1PMv+hLTNbIkMjJTr311FxTi9kqwbKdU2MVQL wxaqNyIl/ucYc6BYYTlmErlN0QWDHg== =QYK1 -----END PGP SIGNATURE----- Merge tag 'regmap-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This was a very quiet release for regmap, we added kunit test coverage for a noinc fix that was merged during v6.7 and a couple of other trivial cleanups" * tag 'regmap-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix kcalloc() arguments order regmap: fix regmap_noinc_write() description regmap: kunit: add noinc write test regmap: ram: support noinc semantics |
||
|
Linus Torvalds
|
fb46e22a9e |
Many singleton patches against the MM code. The patch series which
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
|
Erick Archer
|
022e6f5184 |
PM: QoS: Use kcalloc() instead of kzalloc()
Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Erick Archer <erick.archer@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
bfe8eb3b85 |
Scheduler changes for v6.8:
- Energy scheduling:
- Consolidate how the max compute capacity is
used in the scheduler and how we calculate
the frequency for a level of utilization.
- Rework interface between the scheduler and
the schedutil governor
- Simplify the util_est logic
- Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE
starvation of low priority tasks (e.g., SCHED_OTHER)
tasks when higher priority tasks monopolize CPU
cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are
not introduced yet.
- EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
- NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more,
to better distribute the probability
of a particular vma getting scanned.
- Plus misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wTVh
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Energy scheduling:
- Consolidate how the max compute capacity is used in the scheduler
and how we calculate the frequency for a level of utilization.
- Rework interface between the scheduler and the schedutil governor
- Simplify the util_est logic
Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE starvation of low
priority tasks (e.g., SCHED_OTHER) tasks when higher priority tasks
monopolize CPU cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are not introduced yet.
EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more, to better
distribute the probability of a particular vma getting scanned.
Plus misc fixes, cleanups and updates"
* tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
sched/fair: Fix tg->load when offlining a CPU
sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair()
sched/fair: Use all little CPUs for CPU-bound workloads
sched/fair: Simplify util_est
sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true)
arm64/amu: Use capacity_ref_freq() to set AMU ratio
cpufreq/cppc: Set the frequency used for computing the capacity
cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}()
energy_model: Use a fixed reference frequency
cpufreq/schedutil: Use a fixed reference frequency
cpufreq: Use the fixed and coherent frequency for scaling capacity
sched/topology: Add a new arch_scale_freq_ref() method
freezer,sched: Clean saved_state when restoring it during thaw
sched/fair: Update min_vruntime for reweight_entity() correctly
sched/doc: Update documentation after renames and synchronize Chinese version
sched/cpufreq: Rework iowait boost
sched/cpufreq: Rework schedutil governor performance estimation
sched/pelt: Avoid underestimation of task utilization
sched/timers: Explain why idle task schedules out on remote timer enqueue
sched/cpuidle: Comment about timers requirements VS idle handler
...
|
||
|
Linus Torvalds
|
ab5f3fcb7c |
arm64 updates for 6.8
* for-next/cpufeature
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye olde
Thunder-X machines.
- Avoid mapping KPTI trampoline when it is not required.
- Make CPU capability API more robust during early initialisation.
* for-next/early-idreg-overrides
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped.
* for-next/fpsimd
- Restore kernel-mode fpsimd context lazily, allowing us to run fpsimd
code sequences in the kernel with pre-emption enabled.
* for-next/kbuild
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y.
- Makefile cleanups.
* for-next/lpa2-prep
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
* for-next/misc
- Remove dead code and fix a typo.
* for-next/mm
- Pass NUMA node information for IRQ stack allocations.
* for-next/perf
- Add perf support for the Synopsys DesignWare PCIe PMU.
- Add support for event counting thresholds (FEAT_PMUv3_TH) introduced
in Armv8.8.
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations.
* for-next/rip-vpipt
- Remove what support we had for the obsolete VPIPT I-cache policy.
* for-next/selftests
- Improvements to the SVE and SME selftests.
* for-next/stacktrace
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing.
* for-next/sysregs
- Update a bunch of register definitions based on the latest XML drop
from Arm.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWWvKYQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIiTB/9agZBkEhZjP2sNDGyE4UFwawweWHkt2r8h
WyvdwP91Z/AIsYSsGYu36J0l4pOnMKp/i6t+rt031SK4j+Q8hJYhSfDt3RvVbc0/
Pz9D18V6cLrfq+Yxycqq9ufVdjs+m+CQ5WeLaRGmNIyEzJ/Jv/qrAN+2r603EeLP
nq08qMZhDIQd2ZzbigCnGaNrTsVSafFfBFv1GsgDvnMZAjs1G6457A6zu+NatNUc
+TMSG+3EawutHZZ2noXl0Ra7VOfIbVZFiUssxRPenKQByHHHR+QB2c/O1blri+dm
XLMutvqO2/WvYGIfXO5koqZqvpVeR3zXxPwmGi5hQBsmOjtXzKd+
=U4mo
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"CPU features:
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
olde Thunder-X machines
- Avoid mapping KPTI trampoline when it is not required
- Make CPU capability API more robust during early initialisation
Early idreg overrides:
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped
FPsimd:
- Restore kernel-mode fpsimd context lazily, allowing us to run
fpsimd code sequences in the kernel with pre-emption enabled
KBuild:
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y
- Makefile cleanups
LPA2 prep:
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
Misc:
- Remove dead code and fix a typo
MM:
- Pass NUMA node information for IRQ stack allocations
Perf:
- Add perf support for the Synopsys DesignWare PCIe PMU
- Add support for event counting thresholds (FEAT_PMUv3_TH)
introduced in Armv8.8
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations
RIP VPIPT:
- Remove what support we had for the obsolete VPIPT I-cache policy
Selftests:
- Improvements to the SVE and SME selftests
Stacktrace:
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing
Sysregs:
- Update a bunch of register definitions based on the latest XML drop
from Arm"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
kselftest/arm64: Don't probe the current VL for unsupported vector types
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64: memory: remove duplicated include
arm: perf: Fix ARCH=arm build with GCC
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
drivers/perf: add DesignWare PCIe PMU driver
PCI: Move pci_clear_and_set_dword() helper to PCI header
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
arm64: irq: set the correct node for shadow call stack
Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
...
|
||
|
Kirill A. Shutemov
|
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
|
Jing Xia
|
93ec4a3b76 |
class: fix use-after-free in class_register()
The lock_class_key is still registered and can be found in
lock_keys_hash hlist after subsys_private is freed in error
handler path.A task who iterate over the lock_keys_hash
later may cause use-after-free.So fix that up and unregister
the lock_class_key before kfree(cp).
On our platform, a driver fails to kset_register because of
creating duplicate filename '/class/xxx'.With Kasan enabled,
it prints a invalid-access bug report.
KASAN bug report:
BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc
Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252
Pointer tag: [15], memory tag: [fe]
CPU: 7 PID: 252 Comm: modprobe Tainted: G W
6.6.0-mainline-maybe-dirty #1
Call trace:
dump_backtrace+0x1b0/0x1e4
show_stack+0x2c/0x40
dump_stack_lvl+0xac/0xe0
print_report+0x18c/0x4d8
kasan_report+0xe8/0x148
__hwasan_store8_noabort+0x88/0x98
lockdep_register_key+0x19c/0x1bc
class_register+0x94/0x1ec
init_module+0xbc/0xf48 [rfkill]
do_one_initcall+0x17c/0x72c
do_init_module+0x19c/0x3f8
...
Memory state around the buggy address:
ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a
ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe
>ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
^
ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03
As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access
not use-after-free here.In this case, modprobe is manipulating
the corrupted lock_keys_hash hlish where lock_class_key is already
freed before.
It's worth noting that this only can happen if lockdep is enabled,
which is not true for normal system.
Fixes:
|
||
|
Greg Kroah-Hartman
|
db2292b01b |
PM: clk: make pm_clk_add_notifier() take a const pointer
The driver core wants to work with const struct bus_type, so there's no reason that pm_clk_add_notifier() should not also do the same thing, considering that it just passes the pointer off to the driver core which is expecting a const *. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/2023121922-triumph-exploit-f545@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafael J. Wysocki
|
7839d0078e |
PM: sleep: Fix possible deadlocks in core system-wide PM code
It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false. Link: https://lore.kernel.org/linux-pm/ZYvjiqX6EsL15moe@perf/ Reported-by: Youngmin Nam <youngmin.nam@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Tested-by: Youngmin Nam <youngmin.nam@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: 5.7+ <stable@vger.kernel.org> # 5.7+: |
||
|
Vincent Guittot
|
1f023007f5 |
arm64/amu: Use capacity_ref_freq() to set AMU ratio
Use the new capacity_ref_freq() method to set the ratio that is used by AMU for computing the arch_scale_freq_capacity(). This helps to keep everything aligned using the same reference for computing CPUs capacity. The default value of the ratio (stored in per_cpu(arch_max_freq_scale)) ensures that arch_scale_freq_capacity() returns max capacity until it is set to its correct value with the cpu capacity and capacity_ref_freq(). Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20231211104855.558096-8-vincent.guittot@linaro.org |
||
|
Vincent Guittot
|
5477fa249b |
cpufreq/cppc: Set the frequency used for computing the capacity
Save the frequency associated to the performance that has been used when initializing the capacity of CPUs. Also, cppc cpufreq driver can register an artificial energy model. In such case, it needs the frequency for this compute capacity. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20231211104855.558096-7-vincent.guittot@linaro.org |
||
|
Vincent Guittot
|
9942cb22ea |
sched/topology: Add a new arch_scale_freq_ref() method
Create a new method to get a unique and fixed max frequency. Currently
cpuinfo.max_freq or the highest (or last) state of performance domain are
used as the max frequency when computing the frequency for a level of
utilization, but:
- cpuinfo_max_freq can change at runtime. boost is one example of
such change.
- cpuinfo.max_freq and last item of the PD can be different leading to
different results between cpufreq and energy model.
We need to save the reference frequency that has been used when computing
the CPUs capacity and use this fixed and coherent value to convert between
frequency and CPU's capacity.
In fact, we already save the frequency that has been used when computing
the capacity of each CPU. We extend the precision to save kHz instead of
MHz currently and we modify the type to be aligned with other variables
used when converting frequency to capacity and the other way.
[ mingo: Minor edits. ]
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231211104855.558096-2-vincent.guittot@linaro.org
|
||
|
Dave Jiang
|
6a954e94d0 |
base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates'
Dan Williams suggested changing the struct 'node_hmem_attrs' to 'access_coordinates' [1]. The struct is a container of r/w-latency and r/w-bandwidth numbers. Moving forward, this container will also be used by CXL to store the performance characteristics of each link hop in the PCIE/CXL topology. So, where node_hmem_attrs is just the access parameters of a memory-node, access_coordinates applies more broadly to hardware topology characteristics. The observation is that seemed like an exercise in having the application identify "where" it falls on a spectrum of bandwidth and latency needs. For the tuple of read/write-latency and read/write-bandwidth, "coordinates" is not a perfect fit. Sometimes it is just conveying values in isolation and not a "location" relative to other performance points, but in the end this data is used to identify the performance operation point of a given memory-node. [2] Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/ Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/ Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Greg Kroah-Hartman
|
580fc9c750 |
driver core: mark remaining local bus_type variables as const
Now that the driver core can properly handle constant struct bus_type, change the local driver core bus_type variables to be a constant structure as well, placing them into read-only memory which can not be modified at runtime. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Kevin Hilman <khilman@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Len Brown <len.brown@intel.com> Acked-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/2023121908-paver-follow-cc21@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
dedb868994 |
driver core: container: make container_subsys const
Now that the driver core can properly handle constant struct bus_type, move the container_subsys variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2023121919-chatter-grumbling-9ef3@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
32f78abe59 |
driver core: bus: constantify subsys_register() calls
The functions subsys_register() and subsys_virtual_register() should be taking a constant pointer to a struct bus_type, as they do not actually modify anything in it, so fix up the function definitions to do so properly. This also changes the pointer type in struct subsys_interface to be constant as well, as again, that's the proper signature of it. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/2023121908-grove-genetics-f8af@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
5ae8120949 |
driver core: bus: make bus_sort_breadthfirst() take a const pointer
For some reason, during the big "clean up the driver core for a const struct bus_type" work, the bus_sort_breadthfirst() call was missed. Fix this up by changing the type to be a const * as it should be. Cc: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/2023121935-stinking-ditzy-fd5d@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Kent Overstreet
|
ed509c7e07 |
PM: fix missing rculist.h dependency
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> |
||
|
Dmitry Antipov
|
3b201c9af7
|
regmap: fix kcalloc() arguments order
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed a bunch of four similar warnings like:
drivers/base/regmap/regmap-ram.c: In function '__regmap_init_ram':
drivers/base/regmap/regmap-ram.c:68:37: warning: 'kcalloc' sizes specified with
'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
68 | data->read = kcalloc(sizeof(bool), config->max_register + 1,
| ^~~~
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/r/20231220175829.533700-1-dmantipov@yandex.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
||
|
Greg Kroah-Hartman
|
7050abeb8f |
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
-----BEGIN PGP SIGNATURE-----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=jH+G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
|
||
|
Ulf Hansson
|
d6948c13b6 |
PM: domains: Move genpd and its governor to the pmdomain subsystem
It seems reasonable to collect the core parts for the generic PM domain, along with its corresponding provider drivers. Therefore let's move the files from drivers/base/power/ to drivers/pmdomain/ and while at it, let's also rename the files accordingly. Moreover, let's also update MAINTAINERS to reflect the update. Cc: Kevin Hilman <khilman@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20231213113305.29098-1-ulf.hansson@linaro.org |
||
|
Ulf Hansson
|
f871e71605 |
PM: domains: Drop redundant header for genpd
The "power.h" is no longer needed by genpd, so let's simply drop the include of it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20231213113245.29075-1-ulf.hansson@linaro.org |
||
|
Mario Limonciello
|
cef9ecc8e9 |
rtc: Extend timeout for waiting for UIP to clear to 1s
Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.
This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.
Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes:
|
||
|
Mario Limonciello
|
120931db07 |
rtc: Add support for configuring the UIP timeout for RTC reads
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes:
|
||
|
Uwe Kleine-König
|
532888a595 |
driver core: Better advertise dev_err_probe()
Describing the usage of dev_err_probe() as being (only?) "deemed acceptable" has a bad connotation. In fact dev_err_probe() fulfills three tasks: - handling of EPROBE_DEFER (even more than degrading to dev_dbg()) - symbolic output of the error code - return err for compact error code paths Advertise these better and claim the usage to be "fine" to get rid of the bad connotation. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231215174540.2438601-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jakub Kicinski
|
8f674972d6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c |
||
|
Ulf Hansson
|
05ce71929e |
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
Since commit
|
||
|
Randy Dunlap
|
3b2714c5d2 |
PM: domains: fix domain_governor kernel-doc warnings
Fix kernel-doc warnings found when using "W=1". domain_governor.c:54: warning: No description found for return value of 'default_suspend_ok' domain_governor.c:266: warning: No description found for return value of '_default_power_down_ok' domain_governor.c:412: warning: cannot understand function prototype: 'struct dev_power_governor pm_domain_always_on_gov = ' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20231205225856.32739-1-rdunlap@infradead.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Linus Torvalds
|
ca20f1622b |
Char/Misc driver fixes for 6.7-rc5
Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXRxAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykphwCfaF0Dh6oajneYbo/pq70+an876uYAnjwALPfr g2EezrYYUAkkPACOd27t =q7gC -----END PGP SIGNATURE----- Merge tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions |
||
|
Linus Torvalds
|
8e819a7623 |
31 hotfixes. 10 of these address pre-6.6 issues and are marked cc:stable.
The remainder address post-6.6 issues or aren't considered serious enough to justify backporting. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXKEfwAKCRDdBJ7gKXxA jlRpAQCiAp1nSqIz/fOKTzoQRaTDXU/m+C+6ZAXdKLDfvQBhpwEAnxxjZ8IgF+8Z Klz/GirHX5w5o7jE2wb8iObo1nR75Qo= =omRq -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "31 hotfixes. Ten of these address pre-6.6 issues and are marked cc:stable. The remainder address post-6.6 issues or aren't considered serious enough to justify backporting" * tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range() nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage() mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI scripts/gdb: fix lx-device-list-bus and lx-device-list-class MAINTAINERS: drop Antti Palosaari highmem: fix a memory copy problem in memcpy_from_folio nilfs2: fix missing error check for sb_set_blocksize call kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP units: add missing header drivers/base/cpu: crash data showing should depends on KEXEC_CORE mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions scripts/gdb/tasks: fix lx-ps command error mm/Kconfig: make userfaultfd a menuconfig selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS mm/damon/core: copy nr_accesses when splitting region lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly checkstack: fix printed address mm/memory_hotplug: fix error handling in add_memory_resource() mm/memory_hotplug: add missing mem_hotplug_lock .mailmap: add a new address mapping for Chester Lin ... |
||
|
Jakub Kicinski
|
2483e7f04c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h |
||
|
Uwe Kleine-König
|
7c41da586e |
driver core: Emit reason for pending deferred probe
Ending a boot log with platform 3f202000.mmc: deferred probe pending is already a nice hint about the problem. Sometimes there is a more detailed error indicator available, add that to the output. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231122093332.274145-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
055467378b |
driver core: Enable fw_devlink=rpm by default
fw_devlink=on has stabilized and is working correctly. Let's start using device links created by fw_devlink to also enforce runtime PM ordering. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20231113220948.80089-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Sakari Ailus
|
3babbf614a |
device property: fwnode_property_get_reference_args allows NULL args now
All three fwnode_property_get_reference_args() implemantations now allow args argument to be NULL. Document this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231109101010.1329587-4-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Sakari Ailus
|
1eaea4b360 |
software node: Let args be NULL in software_node_get_reference_args
fwnode_get_property_reference_args() may not be called with args argument
NULL and while OF already supports this. Add the missing NULL check.
The purpose is to be able to count the references.
Fixes:
|
||
|
Christophe JAILLET
|
4c095734d9 |
software node: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/c7cdc3566c783d106138698b1e1923351fabace8.1698831275.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Gregory Price
|
48b5928e18 |
base/node.c: initialize the accessor list before registering
The current code registers the node as available in the node array
before initializing the accessor list. This makes it so that
anything which might access the accessor list as a result of
allocations will cause an undefined memory access.
In one example, an extension to access hmat data during interleave
caused this undefined access as a result of a bulk allocation
that occurs during node initialization but before the accessor
list is initialized.
Initialize the accessor list before making the node generally
available to the global system.
Fixes:
|
||
|
Christophe JAILLET
|
5bb03d0dd7 |
base: soc: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f0ef849446c9b3df7d6b16b1a58d089b4c17276c.1698831191.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Baoquan He
|
4e9e2e4c65 |
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
After commit |
||
|
Sumanth Korikkar
|
001002e737 |
mm/memory_hotplug: add missing mem_hotplug_lock
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes:
|
||
|
James Morse
|
ca00f7d999 |
drivers: base: Print a warning instead of panic() when register_cpu() fails
loongarch, mips, parisc, riscv and sh all print a warning if register_cpu() returns an error. Architectures that use GENERIC_CPU_DEVICES call panic() instead. Errors in this path indicate something is wrong with the firmware description of the platform, but the kernel is able to keep running. Downgrade this to a warning to make it easier to debug this issue. This will allow architectures that switching over to GENERIC_CPU_DEVICES to drop their warning, but keep the existing behaviour. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R3W-00CszU-GM@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
d631a881f1 |
drivers: base: Move cpu_dev_init() after node_dev_init()
NUMA systems require the node descriptions to be ready before CPUs are registered. This is so that the node symlinks can be created in sysfs. Currently no NUMA platform uses GENERIC_CPU_DEVICES, meaning that CPUs are registered by arch code, instead of cpu_dev_init(). Move cpu_dev_init() after node_dev_init() so that NUMA architectures can use GENERIC_CPU_DEVICES. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R3R-00CszO-C0@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Russell King (Oracle)
|
bb5e44fb3b |
drivers: base: add arch_cpu_is_hotpluggable()
The differences between architecture specific implementations of arch_register_cpu() are down to whether the CPU is hotpluggable or not. Rather than overriding the weak version of arch_register_cpu(), provide a function that can be used to provide this detail instead. Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R3M-00CszH-6r@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
866ec30086 |
drivers: base: Implement weak arch_unregister_cpu()
Add arch_unregister_cpu() to allow the ACPI machinery to call unregister_cpu(). This is enough for arm64, riscv and loongarch, but needs to be overridden by x86 and ia64 who need to do more work. CC: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R3H-00CszC-2n@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
0949dd96df |
drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden
Architectures often have extra per-cpu work that needs doing before a CPU is registered, often to determine if a CPU is hotpluggable. To allow the ACPI architectures to use GENERIC_CPU_DEVICES, move the cpu_register() call into arch_register_cpu(), which is made __weak so architectures with extra work can override it. This aligns with the way x86, ia64 and loongarch register hotplug CPUs when they become present. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R3B-00Csz6-Uh@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
b0c69e1214 |
drivers: base: Use present CPUs in GENERIC_CPU_DEVICES
Three of the five ACPI architectures create sysfs entries using register_cpu() for present CPUs, whereas arm64, riscv and all GENERIC_CPU_DEVICES do this for possible CPUs. Registering a CPU is what causes them to show up in sysfs. It makes very little sense to register all possible CPUs. Registering a CPU is what triggers the udev notifications allowing user-space to react to newly added CPUs. To allow all five ACPI architectures to use GENERIC_CPU_DEVICES, change it to use for_each_present_cpu(). Making the ACPI architectures use GENERIC_CPU_DEVICES is a pre-requisite step to centralise their register_cpu() logic, before moving it into the ACPI processor driver. When we add support for register CPUs from ACPI in a later patch, we will avoid registering CPUs in this path. Of the ACPI architectures that register possible CPUs, arm64 and riscv do not support making possible CPUs present as they use the weak 'always fails' version of arch_register_cpu(). Only two of the eight architectures that use GENERIC_CPU_DEVICES have a distinction between present and possible CPUs. The following architectures use GENERIC_CPU_DEVICES but are not SMP, so possible == present: * m68k * microblaze * nios2 The following architectures use GENERIC_CPU_DEVICES and consider possible == present: * csky: setup_smp() * processor_probe() sets possible for all CPUs and present for all CPUs except the boot cpu, which will have been done by init/main.c::start_kernel(). um appears to be a subarchitecture of x86. The remaining architecture using GENERIC_CPU_DEVICES are: * openrisc and hexagon: where smp_init_cpus() makes all CPUs < NR_CPUS possible, whereas smp_prepare_cpus() only makes CPUs < setup_max_cpus present. After this change, openrisc and hexagon systems that use the max_cpus command line argument would not see the other CPUs present in sysfs. This should not be a problem as these CPUs can't be brought online as _cpu_up() checks cpu_present(). After this change, only CPUs which are present appear in sysfs. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R36-00Csz0-Px@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
James Morse
|
c72bbf2001 |
arch_topology: Make register_cpu_capacity_sysctl() tolerant to late CPUs
register_cpu_capacity_sysctl() adds a property to sysfs that describes the CPUs capacity. This is done from a subsys_initcall() that assumes all possible CPUs are registered. With CPU hotplug, possible CPUs aren't registered until they become present, (or for arm64 enabled). This leads to messages during boot: | register_cpu_capacity_sysctl: too early to get CPU1 device! and once these CPUs are added to the system, the file is missing. Move this to a cpuhp callback, so that the file is created once CPUs are brought online. This covers CPUs that are added late by mechanisms like hotplug. One observable difference is the file is now missing for offline CPUs. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1r5R2g-00CsyV-Ss@rmk-PC.armlinux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Huang Shijie
|
75b5e0bf90 |
arm64: irq: set the correct node for VMAP stack
In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on percpu "numa_node" which is initialized in:
arch_call_rest_init() --> rest_init() -- kernel_init()
--> kernel_init_freeable() --> smp_prepare_cpus()
But init_irq_stacks() is called in init_IRQ() which is before
arch_call_rest_init().
So in init_irq_stacks(), the cpu_to_node() does not work, it
always return 0. In NUMA, it makes the node 1 cpu accesses the IRQ stack which
is in the node 0.
This patch fixes it by:
1.) export the early_cpu_to_node(), and use it in the init_irq_stacks().
2.) change init_irq_stacks() to __init function.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231124031513.81548-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
|
Matthias Reichl
|
fea8806444
|
regmap: fix bogus error on regcache_sync success
Since commit |
||
|
Sakari Ailus
|
a9c8c73806 |
device property: Add fwnode_name_eq()
Add fwnode_name_eq() to implement the functionality of of_node_name_eq() on fwnode property API. The same convention of ending the comparison at '@' (besides NUL) is applied on also both ACPI and swnode. The function is intended for comparing unit address-less node names on DT and firmware or swnodes compliant with DT bindings. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> |
||
|
Greg Kroah-Hartman
|
eec4954b81 |
driver core: make device_is_dependent() static
The function device_is_dependent() is only called by the driver core internally and should not, at this time, be called by anyone else outside of it, so mark it as static so as not to give driver authors the wrong idea. Cc: Saravana Kannan <saravanak@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/2023112815-faculty-thud-add8@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mukesh Ojha
|
af54d778a0 |
devcoredump: Send uevent once devcd is ready
dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.
In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.
To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.
Fixes:
|
||
|
Kory Maincent
|
a066f906ba |
firmware_loader: Expand Firmware upload error codes with firmware invalid error
No error code are available to signal an invalid firmware content. Drivers that can check the firmware content validity can not return this specific failure to the user-space Expand the firmware error code with an additional code: - "firmware invalid" code which can be used when the provided firmware is invalid Sync lib/test_firmware.c file accordingly. Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231122-feature_firmware_error_code-v3-1-04ec753afb71@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Hugo Villeneuve
|
1957b92aaf
|
regmap: fix regmap_noinc_write() description
Change "Write data from" -> "Write data to". Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231121230900.3754785-1-hugo@hugovil.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Andy Shevchenko
|
fac4a53575 |
device property: Add fwnode_property_match_property_string()
Sometimes the users want to match the single value string property against an array of predefined strings. Create a helper for them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Andy Shevchenko
|
086386311b |
device property: Use fwnode_property_string_array_count()
Use fwnode_property_string_array_count() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Ben Wolsieffer
|
d958d97848
|
regmap: kunit: add noinc write test
Add a test for writing to a noinc register, which verifies that the
write does not touch adjacent registers. This test succeeds with [1]
applied and fails without it.
[1]
|
||
|
Ben Wolsieffer
|
02e3564a34
|
regmap: ram: support noinc semantics
Support noinc semantics in RAM backed regmaps, for testing purposes. Add a new callback that selects registers which should have noinc behavior. Bulk writes to a noinc register will cause the last value in the buffer to be assigned to the register, while bulk reads will copy the same value repeatedly into the buffer. This patch only adds support to regmap-raw-ram, since regmap-ram does not support bulk operations. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Link: https://lore.kernel.org/r/20231102203039.3069305-1-ben.wolsieffer@hefring.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Linus Torvalds
|
eaec7c9892 |
regmap: Fix for v6.7
One fix here, for an interaction between noinc registers and caches - if a device uses noinc registers (which is rare) then we could corrupt registers after the noinc register in the cache. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmVKGw8ACgkQJNaLcl1U h9C8Bwf/U2a00UtJqvg+deoXHQ/7QY8w093DnHxdTLyUcDvwffbfTMrPPOmPtRLh 1OYTtPPAgcF2PjyMaazHON2Y3a1/jPLEyjfRI3UmMWoVCVObUzh30ARASdRlvZj0 1bnj88v32W2hFu/TuUPVVii3g2qH3XccEvX/JaNm0yG9lBHfugPGbVOI2S+MzWL9 iFq+nYyqi6RzD7gq99ZaoA6UdacbCyPWgvHKxoZqhknTlX/KQQDdBlq2alhmbOoU lW3t9dwtZlcoskSTmKDI7Ukz0EnRvK1fcrkhZ/3XrQl349eLmtqcG7rM/ZMoORqL wx8eoxNCyCDnjxV+QfEL6SSQEX+8Mg== =M81g -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "One fix here, for an interaction between noinc registers and caches. If a device uses noinc registers (which is rare) then we could corrupt registers after the noinc register in the cache" * tag 'regmap-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent noinc writes from clobbering cache |
||
|
Linus Torvalds
|
b06f58ad8e |
Driver core changes for 6.7-rc1
Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTe8A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynP0QCfT2jQx3OcL22MoqCvdTuZJKPiHSIAoMxrliJF d4cUeICW17ywlTFzsKg8 =nTeu -----END PGP SIGNATURE----- Merge tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core updates for 6.7-rc1. Nothing major in here at all, just a small number of changes including: - minor cleanups and updates from Andy Shevchenko - __counted_by addition - firmware_loader update for aborting loads cleaner - other minor changes, details in the shortlog - documentation update All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits) firmware_loader: Abort all upcoming firmware load request once reboot triggered firmware_loader: Refactor kill_pending_fw_fallback_reqs() Documentation: security-bugs.rst: linux-distros relaxed their rules driver core: Release all resources during unbind before updating device links driver core: class: remove boilerplate code driver core: platform: Annotate struct irq_affinity_devres with __counted_by resource: Constify resource crosscheck APIs resource: Unify next_resource() and next_resource_skip_children() resource: Reuse for_each_resource() macro PCI: Implement custom llseek for sysfs resource entries kernfs: sysfs: support custom llseek method for sysfs entries debugfs: Fix __rcu type comparison warning device property: Replace custom implementation of COUNT_ARGS() drivers: base: test: Make property entry API test modular driver core: Add missing parameter description to __fwnode_link_add() device property: Clarify usage scope of some struct fwnode_handle members devres: rename the first parameter of devm_add_action(_or_reset) driver core: platform: Unify the firmware node type check driver core: platform: Use temporary variable in platform_device_add() driver core: platform: Refactor error path in a couple places ... |
||
|
Linus Torvalds
|
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Linus Torvalds
|
426ee5196d |
sysctl-6.7-rc1
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove
the sentinel. Both arch and driver changes have been on linux-next for a bit
less than a month. It is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the unneeded
check for procname == NULL.
The last 2 patches are fixes recently merged by Krister Johansen which allow
us again to use softlockup_panic early on boot. This used to work but the
alias work broke it. This is useful for folks who want to detect softlockups
super early rather than wait and spend money on cloud solutions with nothing
but an eventual hung kernel. Although this hadn't gone through linux-next it's
also a stable fix, so we might as well roll through the fixes now.
-----BEGIN PGP SIGNATURE-----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=Qf50
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
||
|
Linus Torvalds
|
385903a7ec |
SoC driver updates for 6.7
The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware drivers.
- Arm FF-A firmware support gains support for v1.1 specification features,
in particular notification and memory transaction descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic,
atmel, tegra, aspeed, vexpress, mediatek, samsung and more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper.
-----BEGIN PGP SIGNATURE-----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=QIut
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
||
|
Ben Wolsieffer
|
984a4afdc8
|
regmap: prevent noinc writes from clobbering cache
Currently, noinc writes are cached as if they were standard incrementing
writes, overwriting unrelated register values in the cache. Instead, we
want to cache the last value written to the register, as is done in the
accelerated noinc handler (regmap_noinc_readwrite).
Fixes:
|
||
|
Linus Torvalds
|
5cbff4b2d9 |
regmap: Updates for v6.7
The main change here is a fix for an issue where we were letting the selector for windowed register ranges get out of sync with the hardware during a cache sync plus associated KUnit tests. This was reported just at the end of the release cycle and only in -next for a day prior to the merge window so it seemed better to hold off for now, the bug had been present for more than a decade so wasn't causing too many practical problems hopefully. There's also a fix for error handling in the debugfs output from Christope Jaillet. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmU/qxsACgkQJNaLcl1U h9CvIgf+JL9LrFApTZliWjEPg1K8CxhRzoFRxUb0tP47f0cJ7zJ6+5uv5GGbfj3N liZvRIMetTs8jk4T/avahS1t55XZ9EkGlItsAFny83otfOw5xA6WOqFTRl5D39G6 yHSJw1gyX+4L5lhJrWbEZG7/SgpKjptZQH6j1/4cwXYTU19gpriypJi4P9nBOzyw GXJqQzTgq8LMdF7twPLR6QipgoE5Z3Oum6qM6C8FfibH/+AsbctzboUhXpJxIO2j CdnYxCkW2Bu8Y0ngkayz0Hj6UnEntRpHklzJeSiP0cVy8xm4DemFSbOB5l6dQ20O RWwpnXfQPYtaMzruKRd3FYNQRrOM9Q== =mrBL -----END PGP SIGNATURE----- Merge tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main change here is a fix for an issue where we were letting the selector for windowed register ranges get out of sync with the hardware during a cache sync plus associated KUnit tests. This was reported just at the end of the release cycle and only in -next for a day prior to the merge window so it seemed better to hold off for now, the bug had been present for more than a decade so wasn't causing too many practical problems hopefully. There's also a fix for error handling in the debugfs output from Christope Jaillet" * tag 'regmap-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Ensure range selector registers are updated after cache sync regmap: kunit: Add test for cache sync interaction with ranges regmap: kunit: Fix marking of the range window as volatile regmap: debugfs: Fix a erroneous check after snprintf() |
||
|
Mark Brown
|
6bbebcc11a
|
regmap: Merge up fix for window/paging issue
This was too late and could potentially impact too many drivers for me to be comfortable sending it before the merge window. |
||
|
Mukesh Ojha
|
effd7c70ea |
firmware_loader: Abort all upcoming firmware load request once reboot triggered
There could be following scenario where there is a ongoing reboot
is going from processA which tries to call all the reboot notifier
callback and one of them is firmware reboot call which tries to
abort all the ongoing firmware userspace request under fw_lock but
there could be another processB which tries to do request firmware,
which came just after abort done from ProcessA and ask for userspace
to load the firmware and this can stop the ongoing reboot ProcessA
to stall for next 60s(default timeout) which may not be expected
behaviour everyone like to see, instead we should abort any firmware
load request which came once firmware knows about the reboot through
notification.
ProcessA ProcessB
kernel_restart_prepare
blocking_notifier_call_chain
fw_shutdown_notify
kill_pending_fw_fallback_reqs
__fw_load_abort
fw_state_aborted request_firmware
__fw_state_set firmware_fallback_sysfs
... fw_load_from_user_helper
.. ...
. ..
usermodehelper_read_trylock
fw_load_sysfs_fallback
fw_sysfs_wait_timeout
usermodehelper_disable
__usermodehelper_disable
down_write()
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/1698330459-31776-2-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Mukesh Ojha
|
87ffa98eee |
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Rename 'only_kill_custom' and refactor logic related to it to be more meaningful. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1698330459-31776-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mark Brown
|
0ec7731655
|
regmap: Ensure range selector registers are updated after cache sync
When we sync the register cache we do so with the cache bypassed in order to avoid overhead from writing the synced values back into the cache. If the regmap has ranges and the selector register for those ranges is in a register which is cached this has the unfortunate side effect of meaning that the physical and cached copies of the selector register can be out of sync after a cache sync. The cache will have whatever the selector was when the sync started and the hardware will have the selector for the register that was synced last. Fix this by rewriting all cached selector registers after every sync, ensuring that the hardware and cache have the same content. This will result in extra writes that wouldn't otherwise be needed but is simple so hopefully robust. We don't read from the hardware since not all devices have physical read support. Given that nobody noticed this until now it is likely that we are rarely if ever hitting this case. Reported-by: Hector Martin <marcan@marcan.st> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231026-regmap-fix-selector-sync-v1-1-633ded82770d@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Mark Brown
|
6a2e332c2c
|
regmap: kunit: Add test for cache sync interaction with ranges
Hector Martin reports that since when doing a cache sync we enable cache bypass if the selector register for a range is cached then we might leave the physical selector register pointing to a different value to that which we have in the cache. If we then try to write to the page that our cache tells us is selected we will not update the selector register and write to the wrong page. Add a test case covering this. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231023-regmap-test-window-cache-v1-2-d8a71f441968@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Mark Brown
|
fabe32cc1e
|
regmap: kunit: Fix marking of the range window as volatile
For some reason the regmap used for testing ranges was not including the end of the range of paged registers as volatile since it found the end by counting from the selector register rather than the base of the window. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231023-regmap-test-window-cache-v1-1-d8a71f441968@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Huang Ying
|
362d37a106 |
mm, pcp: reduce lock contention for draining high-order pages
In commit
|
||
|
Huang Ying
|
94a3bfe407 |
cacheinfo: calculate size of per-CPU data cache slice
This can be used to estimate the size of the data cache slice that can be used by one CPU under ideal circumstances. Both DATA caches and UNIFIED caches are used in calculation. So, the users need to consider the impact of the code cache usage. Because the cache inclusive/non-inclusive information isn't available now, we just use the size of the per-CPU slice of LLC to make the result more predictable across architectures. This may be improved when more cache information is available in the future. A brute-force algorithm to iterate all online CPUs is used to avoid to allocate an extra cpumask, especially in offline callback. Link: https://lkml.kernel.org/r/20231016053002.756205-3-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Rafael J. Wysocki
|
067e61399d |
OPP updates for 6.7
- Extend support for the opp-level beyond required-opps (Ulf Hansson). - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru). - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi). - Fix -Wunsequenced warning (Nathan Chancellor). - General cleanup (Viresh Kumar). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmU49bgACgkQ0rkcPK6B EhxZNQ/5AeR90rLc56EXijCJO2uBJFWJ86hVy8ILOR1iOkdQoU5lXOToCalDfLOj IzjYUSiyHuuKUi1BUAZDgMqdAWX1T/GVFNA9QMDXAGAH8HjLvC+ar6Z5N2o94bXq Qvjfnb2kYQQR54lM4N7kfW94QH/dPBrheHKGBdO0ytUXPHdakSF0dGdaudugSbaU 7T63vnt1Ow+aAjEDOF2Uv5BeFJ72EEQtvxoPUUBYFTMzzTh0fgLc8jRYwMEHTK2s v1C5A7XrTmnzmyx0XsrpEv6v++MKLe4hHa14YfPJBg1a3UxKZ2P1joK4YFxXTLbe luFYaFvmUJqxNZMBYOIBJZSI+bTaLkqECCmkk+r5DbpyYMFd3ABF8DIBkX5tyvbr x/yf6q63ZKjt9TNNwEYTqNS+B0KsrDuKwDTKvFXE0u8u58/yiEdPMUhloLNjb4Mk X5JeoGnUS/rHKJ7enTV9jdt/D1W5w4Fbj+5KZ943228zNLO3zsVSz6NaBvTCH+a2 4MWdAVXi+GPX4bwVTMZE3YlnRtNU8CqW2OkoN2fAO8w0DPDeO4avjFXWl/zcnOZj 70UX6GSzo4LD8KCMKSrGEK/ShjyRBR7a0OuDy6KShkQxEZoUAJAJia5hPS7oQegb S6vvDQu6drgZX+PwPNJofsMHNldd53eIFfoeP33rRtx9yqHlBQE= =SEJw -----END PGP SIGNATURE----- Merge tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge OPP (operating performance points) updates for 6.7 from Viresh Kumar: "- Extend support for the opp-level beyond required-opps (Ulf Hansson). - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru). - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi). - Fix -Wunsequenced warning (Nathan Chancellor). - General cleanup (Viresh Kumar)." * tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property OPP: No need to defer probe from _opp_attach_genpd() OPP: Remove genpd_virt_dev_lock OPP: Reorder code in _opp_set_required_opps_genpd() OPP: Add _link_required_opps() to avoid code duplication OPP: Fix formatting of if/else block dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs OPP: Fix -Wunsequenced in _of_add_opp_table_v1() dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps OPP: debugfs: Fix warning with W=1 builds OPP: Remove doc style comments for internal routines OPP: Add dev_pm_opp_find_level_floor() OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() |
||
|
Saravana Kannan
|
2e84dc3792 |
driver core: Release all resources during unbind before updating device links
This commit fixes a bug in commit |
||
|
Maurizio Lombardi
|
28f2d57d88 |
driver core: class: remove boilerplate code
Jump to err_out to avoid duplicating the code. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20231020160042.759439-1-mlombard@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
e1e80380f1 |
regmap: Fix for v6.6
A straightforward fix from Johan for a long standing bug in cases where we both have regmaps without devices and something is using dev_get_regmap(). -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUv6g4ACgkQJNaLcl1U h9BAFAf/Xcx9jWPmYJ4Peon5j25nkzuMn0A4aka2uqfr5juTFZYXi3milp5hTpfD tTC0cgBaADKCTXPU2aDrQeiHd1Rr18sOxAUdQWr7POPsuT+LJFpTjl5agNgPRa9a LqdPA+KfrYV1snIC+sQDhEuHX1UtxDdXCS4Q0KpxIiEZGt3/Z6kDysWEQCPR8m1e uNauKz2GaDB1ejXnEnZFMjkleKbBPc8qMF8A/c2lTayIjDn1xYVbj9IzHKoIP+au S9eMBLrnPNPqhOJxe0pQKIfSz5nbMls/NCZRD/IQN8TTQ/Z6LActfUoKMS09hR6p t8aEB9YCm8Wb+5ad8A0e3molsylvGQ== =RWQo -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A straightforward fix from Johan for a long standing bug in cases where we both have regmaps without devices and something is using dev_get_regmap()" * tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix NULL deref on lookup |
||
|
Joel Granados
|
febce0693e |
fw loader: Remove the now superfluous sentinel element from ctl_table array
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from firmware_config_table Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Johan Hovold
|
c6df843348
|
regmap: fix NULL deref on lookup
Not all regmaps have a name so make sure to check for that to avoid
dereferencing a NULL pointer when dev_get_regmap() is used to lookup a
named regmap.
Fixes:
|
||
|
Kees Cook
|
36b2d7dd5a |
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct irq_affinity_devres. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: linux-hardening@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231006201749.work.432-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Sudeep Holla
|
0a30c0e9ca |
Merge branch 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into for-next/scmi/updates
This is the merge of immutable point in PM OPP tree shared with SCMI so that the SCMI changes based on these OPP changes can be merged via the SCMI tree. * 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() |
||
|
Ulf Hansson
|
401e09201a |
PM: domains: Implement the ->set_performance_state() callback for genpd
To enable generic support for performance scaling for PM domains, let's implement the ->set_performance_state() callback for genpd. Beyond this change, users of the corresponding genpd specific API, dev_pm_genpd_set_performance_state() are encouraged to switch to the common dev_pm_domain_set_performance_state() API. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
Ulf Hansson
|
3fbc5c3b85 |
PM: domains: Introduce dev_pm_domain_set_performance_state()
The generic PM domain is currently the only PM domain variant that supports performance scaling. To allow performance scaling to be supported through a common interface, let's add an optional callback ->set_performance_state(), in the struct dev_pm_domain. Moreover, let's add a function, dev_pm_domain_set_performance_state(), that may be called by consumers to request a new performance state for a device through its PM domain. Note that, in most cases it's preferred that a consumer use the OPP library to request a new performance state for its device. Although, this requires some additional changes to be supported, which are being implemented from subsequent changes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
Geert Uytterhoeven
|
98ad1dd06a |
drivers: base: test: Make property entry API test modular
There is no reason why the KUnit Tests for the property entry API can only be built-in. Add support for building these tests as a loadable module, like is supported by most other tests. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/98388154383df9d4ced73946efd18318aeea50e2.1695820382.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
f1ac370cdd |
driver core: Add missing parameter description to __fwnode_link_add()
The kernel documentation validator is not happy with:
drivers/base/core.c:67: warning: Function parameter or member 'flags' not described in '__fwnode_link_add'
Add missing parameter description.
Fixes:
|
||
|
Andy Shevchenko
|
243e1b776f |
driver core: platform: Unify the firmware node type check
OF and ACPI currently are using asymmetrical APIs to check for the firmware node type. Unify them by using is_*_node() against struct fwnode_handle pointer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
6136597c8f |
driver core: platform: Use temporary variable in platform_device_add()
With the temporary variable for the struct device pointer the code looks better and slightly easier to read and parse by human being. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
a549e3aac2 |
driver core: platform: Refactor error path in a couple places
The usual pattern is to bail out on the error case. Besides that one of the labels is redundant as we may return directly. Refactor platform_device_add() and platform_dma_configure() accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231003142122.3072824-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
aab8aa0d35 |
driver core: platform: Drop redundant check in platform_device_add()
Starting from the commit
|
||
|
Linus Torvalds
|
cdcb5d194f |
regmap: Fix for v6.4
A fix for a long standing issue where when we create a new node in an rbtree register cache we were failing to convert the register address of the new register into a bitmask correctly and marking the wrong register as being present in the newly created node. This would only have affected devices with a register stride other than 1 but would corrupt data on those devices. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUcVmcACgkQJNaLcl1U h9A4sgf+K/KziZcfrjzZhsuQ02qfNVDwBrYcsJCW8CjomFq1kb7QMwX1NgDkZRRD +RbBuPvj1t/BMzsePJWrY7wDcOQHPijQPeOufcz6ZxASX0LQN3SCQR2GV+JJJSXb XW0RLws6WcpG15XZvV8ddxYgeIeAKOhrECZg8bcHvsdin5rU19H4FydiLDS7ZCvV jN1XYtwtFosaV/Zi28cE5nOJ3xFZeYzzx6SbdpCiQSY4llqiMxVBfffpS3wDQHWb hLHDHeiD/kNqS+sDVDsHEOgHiWMv1JN8P6pNvPMdNqVDAgq5lVlAB3zex1pFCTV9 FRVBTgKLZEafeMqIpMus6WJe0oKCTQ== =LK1Y -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A fix for a long standing issue where when we create a new node in an rbtree register cache we were failing to convert the register address of the new register into a bitmask correctly and marking the wrong register as being present in the newly created node. This would only have affected devices with a register stride other than 1 but would corrupt data on those devices" * tag 'regmap-fix-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fix wrong register marked as in-cache when creating new node |
||
|
Richard Fitzgerald
|
7a795ac8d4
|
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
When regcache_rbtree_write() creates a new rbtree_node it was passing the
wrong bit number to regcache_rbtree_set_register(). The bit number is the
offset __in number of registers__, but in the case of creating a new block
regcache_rbtree_write() was not dividing by the address stride to get the
number of registers.
Fix this by dividing by map->reg_stride.
Compare with regcache_rbtree_read() where the bit is checked.
This bug meant that the wrong register was marked as present. The register
that was written to the cache could not be read from the cache because it
was not marked as cached. But a nearby register could be marked as having
a cached value even if it was never written to the cache.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
|
||
|
Ulf Hansson
|
3dd91515ef |
PM: domains: Allow genpd providers to manage OPP tables directly by its FW
In some cases the OPP tables aren't specified in device tree, but rather encoded in the FW. To allow a genpd provider to specify them dynamically instead, let's add a new genpd flag, GENPD_FLAG_OPP_TABLE_FW. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20230825112633.236607-13-ulf.hansson@linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
Andy Shevchenko
|
fd6f7ad2fd |
driver core: return an error when dev_set_name() hasn't happened
The commit |
||
|
Christophe JAILLET
|
d3601857e1
|
regmap: debugfs: Fix a erroneous check after snprintf()
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes:
|
||
|
Linus Torvalds
|
28a4f91f5f |
Driver core changes for 6.6-rc1
Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH77Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylZMACePk8SitfaJc6FfFf5I7YK7Nq0V8MAn0nUjgsR i8NcNpu/Yv4HGrDgTdh/ =PJbk -----END PGP SIGNATURE----- Merge tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) driver core: Call in reversed order in device_platform_notify_remove() driver core: Return proper error code when dev_set_name() fails kobject: Remove redundant checks for whether ktype is NULL kobject: Add sanity check for kset->kobj.ktype in kset_register() drivers: base: test: Add missing MODULE_* macros to root device tests drivers: base: test: Add missing MODULE_* macros for platform devices tests drivers: base: Free devm resources when unregistering a device drivers: base: Add basic devm tests for platform devices drivers: base: Add basic devm tests for root devices kernfs: fix missing kernfs_iattr_rwsem locking docs: stable-kernel-rules: mention that regressions must be prevented docs: stable-kernel-rules: fine-tune various details docs: stable-kernel-rules: make the examples for option 1 a proper list docs: stable-kernel-rules: move text around to improve flow docs: stable-kernel-rules: improve structure by changing headlines base/node: Remove duplicated include kernfs: attach uuid for every kernfs and report it in fsid kernfs: add stub helper for kernfs_generic_poll() x86/resctrl: make pseudo_lock_class a static const structure x86/MSR: make msr_class a static const structure ... |
||
|
Linus Torvalds
|
f8fd5c2483 |
This pull request is full of clk driver changes. In fact, there aren't any
changes to the clk framework this time around. That's probably because everyone
was on vacation (yours truly included). We did lose a couple clk drivers this
time around because nobody was using those devices. That skews the diffstat a
bit, but either way, nothing looks out of the ordinary here. The usual suspects
are chugging along adding support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a handful of
patches that move the NR_CLKS define from the DT binding header to the driver.
There's even patches that migrate drivers to use clk_parent_data and clk_hw to
describe clk tree topology. It seems that the spring (summer?) cleaning bug got
some folks, or the semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio codec on
RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs
- Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative
parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher) clock rate
for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to
the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are
added, while PCIe pipe clock, SDCC rcg ops are corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver
- Support retention for the Qualcomm SC8280XP display clock controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix
issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250,
while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for correctness
- Extend the Qualcomm SM83550 Video clock controller to support SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow
glitch free switching
-----BEGIN PGP SIGNATURE-----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=h2Jz
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
||
|
Linus Torvalds
|
8f447694c2 |
Devicetree updates for v6.6:
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmTubyoACgkQ+vtdtY28
YcPamA//feXFYNPiIbSa7XqfAu1PE5XSg3PqCe77QvLBGJU7saTwRJApc88iTjlA
hc5EELnZKp3FE9N7DJdmvEjYxKDqtJOukO+txKy3mFBWo+gZQURthZVcbLxUZmpw
XmYA4b/GrIv5h8YWG1wokyaGTtSfTcf0+RmAtVepiDk5kWQKaC04Let356fKn9xi
ePgLTZV6BJvPoGpMWd08o+1szUAc6Vihs9qWu7g0+mtb5K5xi/l05YMz3REu7kpf
iz06CE/uzYvHpFBJZ6izN+9Qqxh52DnWckXX68v8kStHUON2h1YmZYvjhGrfay4k
rHeDnHoRBrepDDCytXQ/fxzGtURr3b8yBnlhzEQadMLXmf25mm+TRBDmf6GnX5ij
QmHlj+eSARIafcbb4fqF1Hdyv8c7XM0AkEnj1XrIWLtXPuRNSHlS25dngCztbII/
lqmtBaH1ifCKj2VQ8YL8sVX7k208YU9vDNKZHQyA8dPEYwhknrWmp1F0OAnBB+wz
F11kDE7xkZ0/gE7mUHwe9mP94hC6Ceks4IuBvsTzBmSwqXxyCz8gM2KHK4U3gNUr
Sk2hWgZn+k2HM9zLb38FE18C6hqws6RBUWnJwZ4V3qPo2eYJ8Jzkvm7oonxjHgCC
4FmYYAoCQhBEkZPOJ4map0eO5VbShn9Hrgs46Jj4WoXmm7dFDLc=
=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
||
|
Linus Torvalds
|
6c1b980a7e |
dma-maping updates for Linux 6.6
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
-----BEGIN PGP SIGNATURE-----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=kVVr
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
|
||
|
Linus Torvalds
|
d68b4b6f30 |
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
||
|
Linus Torvalds
|
b96a3e9142 |
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
||
|
Linus Torvalds
|
0fc81f3764 |
regmap: Updates for v6.6
This is a much quieter release than the past few, there's one small API
addition that I noticed a user for in ALSA and a bunch of cleanups:
- Provide an interface for determining if a register is present in the
cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary bodges
that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp43QACgkQJNaLcl1U
h9BjUQf/RDJztYDL/ELIxVPfdFWAgTfAErcRgKpdpnrhMR0GljGYNyrTMwUBbnuF
+EL2v+k34wDNGobLbnGaHJIMb+r26QrHCoX9Zm0r/b5z9v3yS3QXco/MueZyMz45
SYbiEUnXj/WjYUUtVpVw6nxnREH6XpOZ1080XF4Bg9YpyCiq7128WJwivuT8XLJM
qZSb4DOQXFV26nitpTuJMkRIS1FgIh5ZKAPWpvZfP+wOStZhW3IFGlWIAkOQQ5gK
PqFA0BQV1fOVttjRGAR2sKCS4MfuIkIHmCfSfvNfLQG2GW86zb+Bpi0BFEUnl4Py
dqzztIknq19fWe9mCElSrdww25M2vg==
=fqmz
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
|
||
|
Eric DeVolder
|
88a6f89944 |
crash: memory and CPU hotplug sysfs attributes
Introduce the crash_hotplug attribute for memory and CPUs for use by
userspace. These attributes directly facilitate the udev rule for
managing userspace re-loading of the crash kernel upon hot un/plug
changes.
For memory, expose the crash_hotplug attribute to the
/sys/devices/system/memory directory. For example:
# udevadm info --attribute-walk /sys/devices/system/memory/memory81
looking at device '/devices/system/memory/memory81':
KERNEL=="memory81"
SUBSYSTEM=="memory"
DRIVER==""
ATTR{online}=="1"
ATTR{phys_device}=="0"
ATTR{phys_index}=="00000051"
ATTR{removable}=="1"
ATTR{state}=="online"
ATTR{valid_zones}=="Movable"
looking at parent device '/devices/system/memory':
KERNELS=="memory"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{auto_online_blocks}=="offline"
ATTRS{block_size_bytes}=="8000000"
ATTRS{crash_hotplug}=="1"
For CPUs, expose the crash_hotplug attribute to the
/sys/devices/system/cpu directory. For example:
# udevadm info --attribute-walk /sys/devices/system/cpu/cpu0
looking at device '/devices/system/cpu/cpu0':
KERNEL=="cpu0"
SUBSYSTEM=="cpu"
DRIVER=="processor"
ATTR{crash_notes}=="277c38600"
ATTR{crash_notes_size}=="368"
ATTR{online}=="1"
looking at parent device '/devices/system/cpu':
KERNELS=="cpu"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{crash_hotplug}=="1"
ATTRS{isolated}==""
ATTRS{kernel_max}=="8191"
ATTRS{nohz_full}==" (null)"
ATTRS{offline}=="4-7"
ATTRS{online}=="0-3"
ATTRS{possible}=="0-7"
ATTRS{present}=="0-3"
With these sysfs attributes in place, it is possible to efficiently
instruct the udev rule to skip crash kernel reloading for kernels
configured with crash hotplug support.
For example, the following is the proposed udev rule change for RHEL
system 98-kexec.rules (as the first lines of the rule file):
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
When examined in the context of 98-kexec.rules, the above rules test if
crash_hotplug is set, and if so, the userspace initiated
unload-then-reload of the crash kernel is skipped.
CPU and memory checks are separated in accordance with CONFIG_HOTPLUG_CPU
and CONFIG_MEMORY_HOTPLUG kernel config options. If an architecture
supports, for example, memory hotplug but not CPU hotplug, then the
/sys/devices/system/memory/crash_hotplug attribute file is present, but
the /sys/devices/system/cpu/crash_hotplug attribute file will NOT be
present. Thus the udev rule skips userspace processing of memory hot
un/plug events, but the udev rule will evaluate false for CPU events, thus
allowing userspace to process CPU hot un/plug events (ie the
unload-then-reload of the kdump capture kernel).
Link: https://lkml.kernel.org/r/20230814214446.6659-5-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Andy Shevchenko
|
29c8ab79e9 |
driver core: Call in reversed order in device_platform_notify_remove()
It's logically correct to call the removal notifiers in the reversed order as it might be dependent to each other. Luckily, platform_notify_remove() currently is not used and the others have no dependency use, but theoretically it's still possible. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230818133654.767986-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
d21fdd07ce |
driver core: Return proper error code when dev_set_name() fails
Whe device_add() tries to assign a device name with help of dev_set_name() the error path explicitly uses -EINVAL, while the function may return something different. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230817091221.463721-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Hugh Dickins
|
4b5b7850c9 |
mm,thp: fix nodeN/meminfo output alignment
Add one more space to FileHugePages and FilePmdMapped, so the output is aligned with other rows in /sys/devices/system/node/nodeN/meminfo. Link: https://lkml.kernel.org/r/be861b50-a790-e041-bcb0-2a987dcfd1a@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Aneesh Kumar K.V
|
1a8c64e110 |
mm/memory_hotplug: embed vmem_altmap details in memory block
With memmap on memory, some architecture needs more details w.r.t altmap such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead of computing them again when we remove a memory block, embed vmem_altmap details in struct memory_block if we are using memmap on memory block feature. [yangyingliang@huawei.com: fix error return code in add_memory_resource()] Link: https://lkml.kernel.org/r/20230809081552.1351184-1-yangyingliang@huawei.com Link: https://lkml.kernel.org/r/20230808091501.287660-7-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Maxime Ripard
|
f7bb242601 |
drivers: base: test: Add missing MODULE_* macros to root device tests
Commit |
||
|
Maxime Ripard
|
f71b144e3e |
drivers: base: test: Add missing MODULE_* macros for platform devices tests
Commit |
||
|
David Gow
|
699fb50d99 |
drivers: base: Free devm resources when unregistering a device
In the current code, devres_release_all() only gets called if the device has a bus and has been probed. This leads to issues when using bus-less or driver-less devices where the device might never get freed if a managed resource holds a reference to the device. This is happening in the DRM framework for example. We should thus call devres_release_all() in the device_del() function to make sure that the device-managed actions are properly executed when the device is unregistered, even if it has neither a bus nor a driver. This is effectively the same change than commit |
||
|
Maxime Ripard
|
b4cc44301b |
drivers: base: Add basic devm tests for platform devices
Platform devices show some inconsistencies with how devm resources are released when the device has been probed and when it hasn't. In particular, we can register device-managed actions no matter if the device has be bound to a driver or not, but devres_release_all() will only be called if it was bound to a driver or if there's no reference held to it anymore. If it wasn't bound to a driver and we still have a reference, devres_release_all() will never get called. This is surprising considering that if the driver isn't bound but doesn't have any reference to it anymore, that function will get called, and if it was bound to a driver but still has references, that function will get called as well. Even if that case is fairly unusual, it can easily lead to memory leaks. The plan is, with the next patch, to make it consistent and enforce that devres_release_all() is called no matter what situation we're in. For now, it just tests for the current behaviour and skips over the inconsistencies. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-2-6aa7e074f373@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Maxime Ripard
|
06188bc80c |
drivers: base: Add basic devm tests for root devices
The root devices show some odd behaviours compared to regular "bus" devices that have been probed through the usual mechanism, so let's create kunit tests to exercise those paths and odd cases. It's not clear whether root devices are even allowed to use device managed resources, but the fact that it works in some cases but not others like shown in that test suite shouldn't happen either way: we want to make it consistent and documented. These tests will (after the following patches) ensure that consistency and effectively document that it's allowed. If it ever turns out to be a bad idea, we can always roll back and modify the tests then. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-1-6aa7e074f373@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
GUO Zihua
|
7f0718eda1 |
base/node: Remove duplicated include
Remove duplicated include of linux/hugetlb.h. Resolves checkincludes message. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20230810120008.25297-1-guozihua@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Borislav Petkov (AMD)
|
3477144c87 |
driver core: cpu: Fix the fallback cpu_show_gds() name
In |
||
|
Borislav Petkov (AMD)
|
6524c798b7 |
driver core: cpu: Make cpu_show_not_affected() static
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes:
|
||
|
Borislav Petkov (AMD)
|
0fddfe3382 |
driver core: cpu: Unify redundant silly stubs
Make them all a weak function, aliasing to a single function which issues the "Not affected" string. No functional changes. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de |
||
|
Linus Torvalds
|
64094e7e31 |
Mitigate Gather Data Sampling issue
* Add Base GDS mitigation * Support GDS_NO under KVM * Fix a documentation typo -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTJh5YACgkQaDWVMHDJ krAzAw/8DzjhAYEa7a1AodCBMNg8uNOPnLNoRPPNhaN5Iw6W3zXYDBDKT9PyjAIx RoIM0aHx/oY9nCpK441o25oCWAAyzk6E5/+q9hMa7B4aHUGKqiDUC6L9dC8UiiSN yvoBv4g7F81QnmyazwYI64S6vnbr4Cqe7K/mvVqQ/vbJiugD25zY8mflRV9YAuMk Oe7Ff/mCA+I/kqyKhJE3cf3qNhZ61FsFI886fOSvIE7g4THKqo5eGPpIQxR4mXiU Ri2JWffTaeHr2m0sAfFeLH4VTZxfAgBkNQUEWeG6f2kDGTEKibXFRsU4+zxjn3gl xug+9jfnKN1ceKyNlVeJJZKAfr2TiyUtrlSE5d+subIRKKBaAGgnCQDasaFAluzd aZkOYz30PCebhN+KTrR84FySHCaxnev04jqdtVGAQEDbTvyNagFUdZFGhWijJShV l2l4A0gFSYJmPfPVuuAwOJnnZtA1sRH9oz/Sny3+z9BKloZh+Nc/+Cu9zC8SLjaU BF3Qv2gU9HKTJ+MSy2JrGS52cONfpO5ngFHoOMilZ1KBHrfSb1eiy32PDT+vK60Y PFEmI8SWl7bmrO1snVUCfGaHBsHJSu5KMqwBGmM4xSRzJpyvRe493xC7+nFvqNLY vFOFc4jGeusOXgiLPpfGduppkTGcM7sy75UMLwTSLcQbDK99mus= =ZAPY -----END PGP SIGNATURE----- Merge tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/gds fixes from Dave Hansen: "Mitigate Gather Data Sampling issue: - Add Base GDS mitigation - Support GDS_NO under KVM - Fix a documentation typo" * tag 'gds-for-linus-2023-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix backwards on/off logic about YMM support KVM: Add GDS_NO support to KVM x86/speculation: Add Kconfig option for GDS x86/speculation: Add force option to GDS mitigation x86/speculation: Add Gather Data Sampling mitigation |
||
|
Linus Torvalds
|
138bcddb86 |
Add a mitigation for the speculative RAS (Return Address Stack) overflow
vulnerability on AMD processors. In short, this is yet another issue where userspace poisons a microarchitectural structure which can then be used to leak privileged information through a side channel. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmTQs1gACgkQEsHwGGHe VUo1UA/8C34PwJveZDcerdkaxSF+WKx7AjOI/L2ws1qn9YVFA3ItFMgVuFTrlY6c 1eYKYB3FS9fVN3KzGOXGyhho6seHqfY0+8cyYupR+PVLn9rSy7GqHaIMr37FdQ2z yb9xu26v+gsvuPEApazS6MxijYS98u71rHhmg97qsHCnUiMJ01+TaGucntukNJv8 FfwjZJvgeUiBPQ/6IeA/O0413tPPJ9weawPyW+sV1w7NlXjaUVkNXwiq/Xxbt9uI sWwMBjFHpSnhBRaDK8W5Blee/ZfsS6qhJ4jyEKUlGtsElMnZLPHbnrbpxxqA9gyE K+3ZhoHf/W1hhvcZcALNoUHLx0CvVekn0o41urAhPfUutLIiwLQWVbApmuW80fgC DhPedEFu7Wp6Okj5+Bqi/XOsOOWN2WRDSzdAq10o1C+e+fzmkr6y4E6gskfz1zXU ssD9S4+uAJ5bccS5lck4zLffsaA03nAYTlvl1KRP4pOz5G9ln6eyO20ar1WwfGAV o5ZsTJVGQMyVA49QFkksj+kOI3chkmDswPYyGn2y8OfqYXU4Ip4eN+VkjorIAo10 zIec3Z0bCGZ9UUMylUmdtH3KAm8q0wVNoFrUkMEmO8j6nn7ew2BhwLMn4uu+nOnw lX2AG6PNhRLVDVaNgDsWMwejaDsitQPoWRuCIAZ0kQhbeYuwfpM= =73JY -----END PGP SIGNATURE----- Merge tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/srso fixes from Borislav Petkov: "Add a mitigation for the speculative RAS (Return Address Stack) overflow vulnerability on AMD processors. In short, this is yet another issue where userspace poisons a microarchitectural structure which can then be used to leak privileged information through a side channel" * tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/srso: Tie SBPB bit setting to microcode patch detection x86/srso: Add a forgotten NOENDBR annotation x86/srso: Fix return thunks in generated code x86/srso: Add IBPB on VMEXIT x86/srso: Add IBPB x86/srso: Add SRSO_NO support x86/srso: Add IBPB_BRTYPE support x86/srso: Add a Speculative RAS Overflow mitigation x86/bugs: Increase the x86 bugs vector size to two u32s |
||
|
Waiman Long
|
1fd7ab3fac |
driver/base/cpu: Retry online operation if -EBUSY
Booting the kernel with "maxcpus=1" is a common technique for CPU partitioning and isolation. It delays the CPU bringup process until when the bootup scripts are ready to bring CPUs online by writing 1 to /sys/device/system/cpu/cpu<X>/online. However, it was found that not all the CPUs were online after bootup. The collection of offline CPUs are different after every reboot. Further investigation reveals that some "online" write operations fail with an -EBUSY error. This error is returned when CPU hotplug is temporiarly disabled when cpu_hotplug_disable() is called. During bootup, the main caller of cpu_hotplug_disable() is pci_call_probe() for PCI device initialization. By measuring the times spent with cpu_hotplug_disabled set in a typical 2-socket server, most of them last less than 10ms. However, there are a few that can last hundreds of ms. Note that the cpu_hotplug_disabled period of different devices can overlap leading to longer cpu_hotplug_disabled hold time. Since the CPU hotplug disable condition is transient and it is not that easy to modify all the existing bootup scripts to handle this condition, the kernel can help by retrying the online operation when an -EBUSY error is returned. This patch retries the online operation in cpu_subsys_online() when an -EBUSY error is returned for up to 5 times after an exponentially increasing delay that can last a total of at least 620ms of waiting time by calling msleep(). With this patch in place, booting up the patched kernel with "maxcpus=1" does not leave any CPU in an offline state in 10 reboot attempts. Reported-by: Vishal Agrawal <vagrawal@redhat.com> Signed-off-by: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/r/20230724143826.3996163-1-longman@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jason Gunthorpe
|
f429378a9b |
driver core: Call dma_cleanup() on the test_remove path
When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.
Add the missing cleanup before going back to re_probe.
Fixes:
|
||
|
Dan Carpenter
|
22d2381bbd |
driver core: test_async: fix an error code
The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.
Fixes:
|
||
|
Andy Shevchenko
|
7f146b2429 |
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
Replace open coded functionality of kstrdup_and_replace() with a call. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230804143910.15504-3-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Rob Herring
|
73aca58b78 |
of: Move of_platform_register_reconfig_notifier() into DT core
There's no reason the generic platform bus code needs to call of_platform_register_reconfig_notifier(). The notifier can be setup before the platform bus is. Let's move it into of_core_init() which is called just before platform_bus_init() instead to keep more of the DT bits in the DT code. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230717143718.1715773-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Petr Tesarik
|
05ee774122 |
swiotlb: make io_tlb_default_mem local to swiotlb.c
SWIOTLB implementation details should not be exposed to the rest of the kernel. This will allow to make changes to the implementation without modifying non-swiotlb code. To avoid breaking existing users, provide helper functions for the few required fields. As a bonus, using a helper function to initialize struct device allows to get rid of an #ifdef in driver core. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Mark Brown
|
5d481ddb6a |
Linux 6.5-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTGxtMeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGy2kH/RUepcJdCEQT2XGz NnHQ7NMKNnkcGLZq0yIgxHnGtu0KWSjb+LxBtd1un0nuVuSnSgGesJFH/B4uY2hq veXHMlyfCPCKLvYziOegMoUBiLR3d7K6urP9XAhAKX5gz9zn3ciZ13W7N9Qdf3Qx 2t0kdT7guv5Ki5u7o+Pylzsbz9wKgIngY1ncfPqWQOaS/McZ58keAjU0z/mVaFQ4 Wanc18dzawpceybqXb6qgCg+khZl6we2Mkl872ANYwAzvOzlVmrenWzM+7jBQvHw DD82KXTwq4lcf1xp7fTKrWdXOTcfyREmXu+Nuazqu5KkcQ9aY7GMi9O5JtjR1PaQ EXCNR3w= =0UH2 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTG5ckACgkQJNaLcl1U h9DGwwf8DyvfdSERxCgH/EsBA4qjjdZGBl5mnrdhZF/8u4wHh3+2wIwPKw2D/Y61 dvt0iJSUHD+BCEPc4/SMuQKsn8Kwsei8YHIXAGp40mimTKj6i3amXLBzXQ5MVxbc Sw+Kn2p5m25N0sNOgxyHJSZ1seRFiJbSnTpSuFEngkSokQ6EGUG6V7OHKPW9yBZu kidxt/6URTheWl3EN+TqB+pQ/7zDggjy7dBkk0+F7cnaLA+iTBnn6HDL0ww2M5Aj Wv/04M8BYr7li/+ShmD7dZjglzrwt3dKakX+2Icg1QxKrrAK3/tciHR5+pnBjtZG mWUUUjTZSB/QQkr6iBPbqz4jN4bs8g== =6xVt -----END PGP SIGNATURE----- regmap: Merge up fixes from Linus' tree Gets us pine64plus back if nothing else. |
||
|
Borislav Petkov (AMD)
|
fb3bd914b3 |
x86/srso: Add a Speculative RAS Overflow mitigation
Add a mitigation for the speculative return address stack overflow vulnerability found on AMD processors. The mitigation works by ensuring all RET instructions speculate to a controlled location, similar to how speculation is controlled in the retpoline sequence. To accomplish this, the __x86_return_thunk forces the CPU to mispredict every function return using a 'safe return' sequence. To ensure the safety of this mitigation, the kernel must ensure that the safe return sequence is itself free from attacker interference. In Zen3 and Zen4, this is accomplished by creating a BTB alias between the untraining function srso_untrain_ret_alias() and the safe return function srso_safe_ret_alias() which results in evicting a potentially poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> |
||
|
Johan Hovold
|
e7b915219b |
PM: sleep: wakeirq: drop unused enable helpers
Drop the wake-irq enable and disable helpers which have not been used
since commit
|
||
|
Johan Hovold
|
8527beb120 |
PM: sleep: wakeirq: fix wake irq arming
The decision whether to enable a wake irq during suspend can not be done
based on the runtime PM state directly as a driver may use wake irqs
without implementing runtime PM. Such drivers specifically leave the
state set to the default 'suspended' and the wake irq is thus never
enabled at suspend.
Add a new wake irq flag to track whether a dedicated wake irq has been
enabled at runtime suspend and therefore must not be enabled at system
suspend.
Note that pm_runtime_enabled() can not be used as runtime PM is always
disabled during late suspend.
Fixes:
|
||
|
Christophe JAILLET
|
ffb57ee9c0
|
regmap: Fix the type used for a bitmap pointer
Bitmaps should be defined as 'unsigned long', not 'long'. Fix the type of 'cache_present' is the 'struct regcache_rbtree_node'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5600df5003d23da10efcfafbda97ca55776d0d29.1689960321.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Mark Brown
|
9c214af0bd |
Linux 6.5-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS9qIoeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGH6EH/2EnB8lLGOl8QINL E8eTWj6e7hdXXEX42j5h+TeGZZgBbTwogzE08uHBOP7lO0h31GVa97D5xkjS8UIa CzjYcnAuvf36nexakdC/0T8WgGzWwzKo0MIVraPBbq/pPRyrJ0CXPzB0Sl4Z2XlL W3N12a1N655FRx/tjaXgUB+aMPGrdBA2t0k6eXwFWyBdQhmt7O8Y3xy0rTVA+qHZ F6D4fZI2Ej9WbxX+tBs+DLEk+ZUz+0fABUqvgJRNofjgm71CpGhbv4ZGUFQaJT+I 5S7cu3R8pS2YLP8TA3kJSj5GUEwPEDEZpxMIJAqkr5uvkNysGi55lYRxxULUw/sO EYHRBJE= =c8SQ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS9qucACgkQJNaLcl1U h9D0nQf+PRGKUD3/1hfcZkhzpVVKuO2X5NuYCPusuPrDnoE9mfhwmTeLK0d2NCjo 3McgfQqmZpWoclkov3SvN5aveRAM4W9r5esNHBUh0jiVsUWzGrEGxzo5xdGPTh/S By7+LDJ58OchU58ngvCw5rLPIlmWYrUxq/xuR3/bTo8KKDNMddimrOUG9ymNDSpR vDfy3mfbX1cg+Ryo3w0ZuANUggCn/YxfmhfQW266YPdRHrkQLEuDCms6+/Lfbv2P A+kXMrLwZ3NRZy9WqRcqL+1I4w7xLPx1LrC0mPSlnUQjEh9ks9rqtcS4i1j+GfR5 gjV/Ytp6m+N6GLiPvTJ1bSCnMz/Zvg== =ZMDk -----END PGP SIGNATURE----- regmap: Merge up fixes from mainline There's several things here that will really help my CI. |
||
|
Mark Brown
|
e02a4ccbec
|
regmap: Remove dynamic allocation warnings for rbtree and maple
Thanks to Dan and Guenter's very prompt updates of the rbtree and maple caches to support GPF_ATOMIC allocations and since the update shook out a bunch of users at least some of whom have been suitably careful about ensuring that the cache is prepoulated so there are no dynamic allocations after init let's revert the warnings. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230721-regmap-enable-kmalloc-v1-1-f78287e794d3@kernel.org |
||
|
Dan Carpenter
|
0c8b0bf42c
|
regmap: rbtree: Use alloc_flags for memory allocations
The kunit tests discovered a sleeping in atomic bug. The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.
[ 5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[ 5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[ 5.006219] preempt_count: 1, expected: 0
[ 5.006414] 1 lock held by kunit_try_catch/117:
[ 5.006590] #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[ 5.007493] irq event stamp: 162
[ 5.007627] hardirqs last enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[ 5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[ 5.008119] softirqs last enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[ 5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[ 5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G N 6.4.4-rc3-g0e8d2fdfb188 #1
[ 5.009011] Hardware name: Generic DT based system
[ 5.009277] unwind_backtrace from show_stack+0x18/0x1c
[ 5.009497] show_stack from dump_stack_lvl+0x38/0x5c
[ 5.009676] dump_stack_lvl from __might_resched+0x188/0x2d0
[ 5.009860] __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[ 5.010061] __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[ 5.010254] kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[ 5.010446] regcache_rbtree_write from _regmap_write+0x88/0x140
[ 5.010634] _regmap_write from regmap_write+0x44/0x68
[ 5.010803] regmap_write from basic_read_write+0x8c/0x270
[ 5.010980] basic_read_write from kunit_try_run_case+0x48/0xa0
Fixes:
|