mirror of
https://github.com/torvalds/linux
synced 2024-09-06 18:01:05 +00:00
552 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
5f16eb0549 |
Char/Misc and other driver subsystem changes for 6.10-rc1
Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY WVk7h01A0lHyacrzm5LN =s95M -----END PGP SIGNATURE----- Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits) misc: ntsync: mark driver as "broken" to prevent from building spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Fix some compile warnings about members not being described dt-bindings: spmi: Deprecate qcom,bus-id dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe() spmi: hisi-spmi-controller: Do not override device identifier dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references spmi: make spmi_bus_type const extcon: adc-jack: Document missing struct members extcon: realtek: Remove unused of_gpio.h extcon: usbc-cros-ec: Convert to platform remove callback returning void extcon: usb-gpio: Convert to platform remove callback returning void extcon: max77843: Convert to platform remove callback returning void extcon: max3355: Convert to platform remove callback returning void extcon: intel-mrfld: Convert to platform remove callback returning void ... |
||
![]() |
53683e4080 |
tracing ring buffer updates for v6.10:
- Add ring_buffer memory mappings The tracing ring buffer was created based on being mostly used with the splice system call. It is broken up into page ordered sub-buffers and the reader swaps a new sub-buffer with an existing sub-buffer that's part of the write buffer. It then has total access to the swapped out sub-buffer and can do copyless movements of the memory into other mediums (file system, network, etc). The buffer is great for passing around the ring buffer contents in the kernel, but is not so good for when the consumer is the user space task itself. A new interface is added that allows user space to memory map the ring buffer. It will get all the write sub-buffers as well as reader sub-buffer (that is not written to). It can send an ioctl to change which sub-buffer is the new reader sub-buffer. The ring buffer is read only to user space. It only needs to call the ioctl when it is finished with a sub-buffer and needs a new sub-buffer that the writer will not write over. A self test program was also created for testing and can be used as an example for the interface to user space. The libtracefs (external to the kernel) also has code that interacts with this, although it is disabled until the interface is in a official release. It can be enabled by compiling the library with a special flag. This was used for testing applications that perform better with the buffer being mapped. Memory mapped buffers have limitations. The main one is that it can not be used with the snapshot logic. If the buffer is mapped, snapshots will be disabled. If any logic is set to trigger snapshots on a buffer, that buffer will not be allowed to be mapped. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkYzDRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qttNAQCj3I0OpeI1vms85ShIa7Eha2qes5uC Yml2fnapkmRSwAEAp5UTGxtDctycWOk9B9PA7/oJmLgATaQwRKoEeTUwfAA= =TyEB -----END PGP SIGNATURE----- Merge tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing ring buffer updates from Steven Rostedt: "Add ring_buffer memory mappings. The tracing ring buffer was created based on being mostly used with the splice system call. It is broken up into page ordered sub-buffers and the reader swaps a new sub-buffer with an existing sub-buffer that's part of the write buffer. It then has total access to the swapped out sub-buffer and can do copyless movements of the memory into other mediums (file system, network, etc). The buffer is great for passing around the ring buffer contents in the kernel, but is not so good for when the consumer is the user space task itself. A new interface is added that allows user space to memory map the ring buffer. It will get all the write sub-buffers as well as reader sub-buffer (that is not written to). It can send an ioctl to change which sub-buffer is the new reader sub-buffer. The ring buffer is read only to user space. It only needs to call the ioctl when it is finished with a sub-buffer and needs a new sub-buffer that the writer will not write over. A self test program was also created for testing and can be used as an example for the interface to user space. The libtracefs (external to the kernel) also has code that interacts with this, although it is disabled until the interface is in a official release. It can be enabled by compiling the library with a special flag. This was used for testing applications that perform better with the buffer being mapped. Memory mapped buffers have limitations. The main one is that it can not be used with the snapshot logic. If the buffer is mapped, snapshots will be disabled. If any logic is set to trigger snapshots on a buffer, that buffer will not be allowed to be mapped" * tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Add cast to unsigned long addr passed to virt_to_page() ring-buffer: Have mmapped ring buffer keep track of missed events ring-buffer/selftest: Add ring-buffer mapping test Documentation: tracing: Add ring-buffer mapping tracing: Allow user-space mapping of the ring-buffer ring-buffer: Introducing ring-buffer mapping functions ring-buffer: Allocate sub-buffers with __GFP_COMP |
||
![]() |
70a663205d |
Probes updates for v6.10:
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping dentry name from 'struct dentry *' and file name from 'struct file *'. - uprobes: Some performance optimizations have been done. . Speed up the BPF uprobe event by delaying the fetching of the uprobe event arguments that are not used in BPF. . Avoid locking by speculatively checking whether uprobe event is valid. . Reduce lock contention by using read/write_lock instead of spinlock for uprobe list operation. This improved BPF uprobe benchmark result 43% on average. - rethook: Removes non-fatal warning messages when tracing stack from BPF and skip rcu_is_watching() validation in rethook if possible. - objpool: Optimizing objpool (which is used by kretprobes and fprobe as rethook backend storage) by inlining functions and avoid caching nr_cpu_ids because it is a const value. - fprobe: Add entry/exit callbacks types (code cleanup) - kprobes: Check ftrace was killed in kprobes if it uses ftrace. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/ qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG VqM= =n/mW -----END PGP SIGNATURE----- Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - tracing/probes: Add new pseudo-types %pd and %pD support for dumping dentry name from 'struct dentry *' and file name from 'struct file *' - uprobes performance optimizations: - Speed up the BPF uprobe event by delaying the fetching of the uprobe event arguments that are not used in BPF - Avoid locking by speculatively checking whether uprobe event is valid - Reduce lock contention by using read/write_lock instead of spinlock for uprobe list operation. This improved BPF uprobe benchmark result 43% on average - rethook: Remove non-fatal warning messages when tracing stack from BPF and skip rcu_is_watching() validation in rethook if possible - objpool: Optimize objpool (which is used by kretprobes and fprobe as rethook backend storage) by inlining functions and avoid caching nr_cpu_ids because it is a const value - fprobe: Add entry/exit callbacks types (code cleanup) - kprobes: Check ftrace was killed in kprobes if it uses ftrace * tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: kprobe/ftrace: bail out if ftrace was killed selftests/ftrace: Fix required features for VFS type test case objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids objpool: enable inlining objpool_push() and objpool_pop() operations rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get() ftrace: make extra rcu_is_watching() validation check optional uprobes: reduce contention on uprobes_tree access rethook: Remove warning messages printed for finding return address of a frame. fprobe: Add entry/exit callbacks types selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD" selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD" Documentation: tracing: add new type '%pd' and '%pD' for kprobe tracing/probes: support '%pD' type for print struct file's name tracing/probes: support '%pd' type for print struct dentry's name uprobes: add speculative lockless system-wide uprobe filter check uprobes: prepare uprobe args buffer lazily uprobes: encapsulate preparation of uprobe args buffer |
||
![]() |
a1e0dd7ce3 |
Documentation: tracing: Add ring-buffer mapping
It is now possible to mmap() a ring-buffer to stream its content. Add some documentation and a code example. Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-5-vdonnefort@google.com Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
dd29dfe78b |
Documentation: tracing: Fix spelling mistakes
Fix spelling mistakes in the documentation. Signed-off-by: Saurav Shah <sauravshah.31@gmail.com> Link: https://lore.kernel.org/r/20240501233659.25441-1-sauravshah.31@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
![]() |
125db341e2 |
docs, kprobes: Add riscv as supported architecture
Support of kprobes and kretprobes for riscv was introduced 3 years ago
by the following change:
commit
|
||
![]() |
1f82d58ddb |
Documentation: ABI + trace: hisi_ptt: update paths to bus/event_source
To allow for assigning a suitable parent to the struct pmu device update the documentation to describe the device via the event_source bus where it will remain accessible. For the ABI documention file also rename the file as it is named after the path. Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20240412161057.14099-30-Jonathan.Cameron@huawei.com |
||
![]() |
5e37460f5f |
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
Similar to printk() '%pd' is for fetch dentry's name from struct dentry's pointer, and '%pD' is for fetch file's name from struct file's pointer. Link: https://lore.kernel.org/all/20240322064308.284457-4-yebin10@huawei.com/ Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
![]() |
7a225ece71 |
trace doc: Minor grammatical correction
Use the correct relative pronoun. Signed-off-by: Sarat Mandava <mandavasarat@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20240321112757.17502-1-mandavasarat@gmail.com |
||
![]() |
3727db1c09 |
tracing/user_events: Document multi-format flag
User programs can now ask user_events to handle the synchronization of multiple different formats for an event with the same name via the new USER_EVENT_REG_MULTI_FORMAT flag. Add a section for USER_EVENT_REG_MULTI_FORMAT that explains the intended purpose and caveats of using it. Explain how deletion works in these cases and how to use /sys/kernel/tracing/dynamic_events for per-version deletion. Link: https://lore.kernel.org/linux-trace-kernel/20240222001807.1463-5-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
e8c32f2476 |
Documentation: tracing: Add entry argument access at function exit
Add a notes about the entry argument access at function exit probes for kprobes and fprobe trace event. Link: https://lore.kernel.org/all/170952367549.229804.8843506960483577062.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
![]() |
a2ded784cd |
tracing updates for 6.8:
- Allow kernel trace instance creation to specify what events are created Inside the kernel, a subsystem may create a tracing instance that it can use to send events to user space. This sub-system may not care about the thousands of events that exist in eventfs. Allow the sub-system to specify what sub-systems of events it cares about, and only those events are exposed to this instance. - Allow the ring buffer to be broken up into bigger sub-buffers than just the architecture page size. A new tracefs file called "buffer_subbuf_size_kb" is created. The user can now specify a minimum size the sub-buffer may be in kilobytes. Note, that the implementation currently make the sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in kilobyte size, and the sub-buffer will be updated to the next size that it will can accommodate it. If the user writes in 10, it will change the size to be 4 pages on x86 (16K), as that is the next available size that can hold 10K pages. - Update the debug output when a corrupt time is detected in the ring buffer. If the ring buffer detects inconsistent timestamps, there's a debug config options that will dump the contents of the meta data of the sub-buffer that is used for debugging. Add some more information to this dump that helps with debugging. - Add more timestamp debugging checks (only triggers when the config is enabled) - Increase the trace_seq iterator to 2 page sizes. - Allow strings written into tracefs_marker to be larger. Up to just under 2 page sizes (based on what trace_seq can hold). - Increase the trace_maker_raw write to be as big as a sub-buffer can hold. - Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been removed. - More selftests were added. - Some code clean ups as well. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZ8p3BQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6ql2GAQDZg/zlFEiJHyTfWbCIE8pA3T5xbzKo 26TNxIZAxJJZpQEAvGFU5Smy14pG6soEoVMp8B6ZOANbqU8VVamhOL+r+Qw= =0OYG -----END PGP SIGNATURE----- Merge tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Allow kernel trace instance creation to specify what events are created Inside the kernel, a subsystem may create a tracing instance that it can use to send events to user space. This sub-system may not care about the thousands of events that exist in eventfs. Allow the sub-system to specify what sub-systems of events it cares about, and only those events are exposed to this instance. - Allow the ring buffer to be broken up into bigger sub-buffers than just the architecture page size. A new tracefs file called "buffer_subbuf_size_kb" is created. The user can now specify a minimum size the sub-buffer may be in kilobytes. Note, that the implementation currently make the sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in kilobyte size, and the sub-buffer will be updated to the next size that it will can accommodate it. If the user writes in 10, it will change the size to be 4 pages on x86 (16K), as that is the next available size that can hold 10K pages. - Update the debug output when a corrupt time is detected in the ring buffer. If the ring buffer detects inconsistent timestamps, there's a debug config options that will dump the contents of the meta data of the sub-buffer that is used for debugging. Add some more information to this dump that helps with debugging. - Add more timestamp debugging checks (only triggers when the config is enabled) - Increase the trace_seq iterator to 2 page sizes. - Allow strings written into tracefs_marker to be larger. Up to just under 2 page sizes (based on what trace_seq can hold). - Increase the trace_maker_raw write to be as big as a sub-buffer can hold. - Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been removed. - More selftests were added. - Some code clean ups as well. * tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits) ring-buffer: Remove stale comment from ring_buffer_size() tracing histograms: Simplify parse_actions() function tracing/selftests: Remove exec permissions from trace_marker.tc test ring-buffer: Use subbuf_order for buffer page masking tracing: Update subbuffer with kilobytes not page order ringbuffer/selftest: Add basic selftest to test changing subbuf order ring-buffer: Add documentation on the buffer_subbuf_order file ring-buffer: Just update the subbuffers when changing their allocation order ring-buffer: Keep the same size when updating the order tracing: Stop the tracing while changing the ring buffer subbuf size tracing: Update snapshot order along with main buffer order ring-buffer: Make sure the spare sub buffer used for reads has same size ring-buffer: Do no swap cpu buffers if order is different ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure ring-buffer: Read and write to ring buffers with custom sub buffer size ring-buffer: Set new size of the ring buffer sub page ring-buffer: Add interface for configuring trace sub buffer size ring-buffer: Page size per ring buffer ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter ring-buffer: Check if absolute timestamp goes backwards ... |
||
![]() |
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
![]() |
1b1934dbbd |
A handful of late-arriving documentation fixes.
-----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWoABAPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Y+yAH/2YPZFKa+QzzYE6xbQnjPErPnGl5Ubdaem3q PODmp5DdIqnVRz8eEHY0h4Y9676RCzXg8aH6H+C5zkKJSof/Z7KKpQjmWTBnr30z QUXgcyxG+rTdZezZG8PKZVhZl7j8YX5ln3i4zR4g0MeaFpxiROrfX22jrnT2fqG4 qkoenoZPwCZsrRP4qo7kDKPyfV8yupgjJ8uDcua7e5/5lSGT5siGVitVD13lcMXo bO/Tdhr2w09S898nZJSEZIP8SvTA1Rjhd0xmHRSaiNjQV/qMU5ZAtaukuBkQGJpY FYP4enQGefBk2hJ92gm5yg0Dv8GSeC3i0aKjhomrvnpu4cVvhxc= =DxUH -----END PGP SIGNATURE----- Merge tag 'docs-6.8-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-6.8-2' of git://git.lwn.net/linux: docs, kprobes: Add loongarch as supported architecture docs, kprobes: Update email address of Masami Hiramatsu docs: admin-guide: hw_random: update rng-tools website Documentation/core-api: fix spelling mistake in workqueue docs: kernel_feat.py: fix potential command injection Documentation: constrain alabaster package to older versions |
||
![]() |
5b9b41617b |
Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following a warning that was added in 6.2. - Some reworking of the Documentation/process front page to, hopefully, make it more useful. - Various kernel-doc tweaks to, for example, make it deal properly with __counted_by annotations. - We have also restored a warning for documentation of nonexistent structure members that disappeared a while back. That had the delightful consequence of adding some 600 warnings to the docs build. A sustained effort by Randy, Vegard, and myself has addressed almost all of those, bringing the documentation back into sync with the code. The fixes are going through the appropriate maintainer trees. - Various improvements to the HTML rendered docs, including automatic links to Git revisions and a nice new pulldown to make translations easy to access. - Speaking of translations, more of those for Spanish and Chinese. ...plus the usual stream of documentation updates and typo fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWcRKMPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YTKIH/AxBt/3iWt40dPf18arZHLU6tdUbmg01ttef CNKWkniCmABGKc//KYDXvjZMRDt0YlrS0KgUzrb8nIQTBlZG40D+88EwjXE0HeGP xt1Fk7OPOiJEqBZ3HEe0PDVfOiA+4yR6CmDKklCJuKg77X9atklneBwPUw/cOASk CWj+BdbwPBiSNQv48Lp87rGusKwnH/g0MN2uS0z9MPr1DYjM1K8+ngZjGW24lZHt qs5yhP43mlZGBF/lwNJXQp/xhnKAqJ9XwylBX9Wmaoxaz9yyzNVsADGvROMudgzi 9YB+Jdy7Z0JSrVoLIRhUuDOv7aW8vk+8qLmGJt2aTIsqehbQ6pk= =fCtT -----END PGP SIGNATURE----- Merge tag 'docs-6.8' of git://git.lwn.net/linux Pull documentation update from Jonathan Corbet: "Another moderately busy cycle for documentation, including: - The minimum Sphinx requirement has been raised to 2.4.4, following a warning that was added in 6.2 - Some reworking of the Documentation/process front page to, hopefully, make it more useful - Various kernel-doc tweaks to, for example, make it deal properly with __counted_by annotations - We have also restored a warning for documentation of nonexistent structure members that disappeared a while back. That had the delightful consequence of adding some 600 warnings to the docs build. A sustained effort by Randy, Vegard, and myself has addressed almost all of those, bringing the documentation back into sync with the code. The fixes are going through the appropriate maintainer trees - Various improvements to the HTML rendered docs, including automatic links to Git revisions and a nice new pulldown to make translations easy to access - Speaking of translations, more of those for Spanish and Chinese ... plus the usual stream of documentation updates and typo fixes" * tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits) MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL A reworked process/index.rst ring-buffer/Documentation: Add documentation on buffer_percent file Translated the RISC-V architecture boot documentation. Docs: remove mentions of fdformat from util-linux Docs/zh_CN: Fix the meaning of DEBUG to pr_debug() Documentation: move driver-api/dcdbas to userspace-api/ Documentation: move driver-api/isapnp to userspace-api/ Documentation/core-api : fix typo in workqueue Documentation/trace: Fixed typos in the ftrace FLAGS section kernel-doc: handle a void function without producing a warning scripts/get_abi.pl: ignore some temp files docs: kernel_abi.py: fix command injection scripts/get_abi: fix source path leak CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer docs: translations: add translations links when they exist kernel-doc: Align quick help and the code MAINTAINERS: add reviewer for Spanish translations docs: ignore __counted_by attribute in structure definitions scripts: kernel-doc: Clarify missing struct member description .. |
||
![]() |
ead8467f96 |
docs, kprobes: Add loongarch as supported architecture
After the following three changes at the beginning of the year: commit |
||
![]() |
b65a6b44f0 |
docs, kprobes: Update email address of Masami Hiramatsu
According to the latest authorship and Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Masami Hiramatsu is working at Google, so the current email @redhat.com is out of date, it is better to use the email @kernel.org. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231219062330.22813-2-yangtiezhu@loongson.cn |
||
![]() |
4b2df884b8 |
ring-buffer/Documentation: Add documentation on buffer_percent file
When the buffer_percent file was added to the kernel, the documentation
should have been updated to document what that file does.
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Fixes:
|
||
![]() |
d3f79db932 |
Documentation/trace: Fixed typos in the ftrace FLAGS section
Fixed typos in the FTRACE_OPS_FL_RECURSION flag description. Signed-off-by: Matthew Cassell <mcassell411@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231223185845.2326-1-mcassell411@gmail.com |
||
![]() |
2f84b39f48 |
tracing: Update subbuffer with kilobytes not page order
Using page order for deciding what the size of the ring buffer sub buffers are is exposing a bit too much of the implementation. Although the sub buffers are only allocated in orders of pages, allow the user to specify the minimum size of each sub-buffer via kilobytes like they can with the buffer size itself. If the user specifies 3 via: echo 3 > buffer_subbuf_size_kb Then the sub-buffer size will round up to 4kb (on a 4kb page size system). If they specify: echo 6 > buffer_subbuf_size_kb The sub-buffer size will become 8kb. and so on. Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
7c3f480265 |
ring-buffer: Add documentation on the buffer_subbuf_order file
Add to the documentation how to use the buffer_subbuf_order file to change the size and how it affects what events can be added to the ring buffer. Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.230636734@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
7c49ca6b02 |
Documentation: Fix filename typo in ftrace doc
The filename for setting the cpumask should be `tracing_cpumask`, instead of `tracing_cpu_mask`. Signed-off-by: Yuanhsi Chung <freshliver.cys@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <20231104103329.215139-1-freshliver.cys@gmail.com> |
||
![]() |
e5d207b24c |
Documentation: coresight: Add cc_threshold tunable
This updates config option to include 'cc_threshold' tunable value. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: James Clark <james.clark@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230921033631.1298723-4-anshuman.khandual@arm.com |
||
![]() |
e49c0b1401 |
Documentation: coresight: fix make refcheckdocs warning
This reference uses a glob pattern to match multiple files, but the
asterisk was escaped as \* in order to not be interpreted by sphinx
as reStructuredText markup.
refcheckdocs/documentation-file-ref-check doesn't know about rST syntax
and tries to interpret the \* literally (instead of as a glob).
We can work around the warning by putting the Documentation reference
inside double backticks (``..``), which allows us to not escape the
asterisk.
Fixes:
|
||
![]() |
b2a866975f |
Documentation: tracing: Add a note about argument and retval access
Add a note about the argument and return value accecss will be best effort. Depending on the type, it will be passed via stack or a pair of the registers, but $argN and $retval only support the single register access. Link: https://lore.kernel.org/all/169556269377.146934.14829235476649685954.stgit@devnote2/ Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
![]() |
31e5f934ff |
Tracing updates for v6.7:
- Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When a event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them. - Clean up of seq_buf. There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this. - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance. - Other minor clean ups and fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZUMrBBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6quzVAQCed/kPM7X9j2QZamJVDruMf2CmVxpu /TOvKvSKV584GgEAxLntf5VKx1Q98bc68y3Zkg+OCi8jSgORos1ROmURhws= =iIgb -----END PGP SIGNATURE----- Merge tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When an event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them - Clean up of seq_buf There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance - Other minor clean ups and fixes * tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) seq_buf: Export seq_buf_puts() seq_buf: Export seq_buf_putc() eventfs: Use simple_recursive_removal() to clean up dentries eventfs: Remove special processing of dput() of events directory eventfs: Delete eventfs_inode when the last dentry is freed eventfs: Hold eventfs_mutex when calling callback functions eventfs: Save ownership and mode eventfs: Test for ei->is_freed when accessing ei->dentry eventfs: Have a free_ei() that just frees the eventfs_inode eventfs: Remove "is_freed" union with rcu head eventfs: Fix kerneldoc of eventfs_remove_rec() tracing: Have the user copy of synthetic event address use correct context eventfs: Remove extra dget() in eventfs_create_events_dir() tracing: Have trace_event_file have ref counters seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str() eventfs: Fix typo in eventfs_inode union comment eventfs: Fix WARN_ON() in create_file_dentry() powerpc: Remove initialisation of readpos tracing/histograms: Simplify last_cmd_set() seq_buf: fix a misleading comment ... |
||
![]() |
ecae0bd517 |
Many singleton patches against the MM code. The patch series which are
included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series "Fixes and cleanups to compaction". - Joel Fernandes has a patchset ("Optimize mremap during mutual alignment within PMD") which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested. - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series "Do not try to access unaccepted memory" Adrian Hunter provides some fixups for the recently-added "unaccepted memory' feature. To increase the feature's checking coverage. "Plug a few gaps where RAM is exposed without checking if it is unaccepted memory". - In the series "cleanups for lockless slab shrink" Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code. - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series "use refcount+RCU method to implement lockless slab shrink". - David Hildenbrand contributes some maintenance work for the rmap code in the series "Anon rmap cleanups". - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series "mm: migrate: more folio conversion and unification". - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series "Add and use bdev_getblk()". - In the series "Use nth_page() in place of direct struct page manipulation" Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames. - In the series "mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO" has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use. - Matthew Wilcox has sent the series "Small hugetlb cleanups" - code rationalization and folio conversions in the hugetlb code. - Yin Fengwei has improved mlock()'s handling of large folios in the series "support large folio for mlock" - In the series "Expose swapcache stat for memcg v1" Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2. - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named "MDWE without inheritance". - Kefeng Wang has provided the series "mm: convert numa balancing functions to use a folio" which does what it says. - In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch makes is possible for a process to propagate KSM treatment across exec(). - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use "high bandwidth memory" in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named "memory tiering: calculate abstract distance based on ACPI HMAT" - In the series "Smart scanning mode for KSM" Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans. - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series "mm: memcg: fix tracking of pending stats updates values". - In the series "Implement IOCTL to get and optionally clear info about PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU. - Hugh Dickins contributed the series "shmem,tmpfs: general maintenance" - a bunch of relatively minor maintenance tweaks to this code. - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series "Handle more faults under the VMA lock". Some rationalizations of the fault path became possible as a result. - In the series "mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups and folio conversions. - In the series "various improvements to the GUP interface" Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements. - Andrey Konovalov has sent along the series "kasan: assorted fixes and improvements" which does those things. - Some page allocator maintenance work from Kemeng Shi in the series "Two minor cleanups to break_down_buddy_pages". - In thes series "New selftest for mm" Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults. - In the series "Add folio_end_read" Matthew Wilcox provides cleanups and an optimization to the core pagecache code. - Nhat Pham has added memcg accounting for hugetlb memory in the series "hugetlb memcg accounting". - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series "Abstract vma_merge() and split_vma()". - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series "Fix page_owner's use of free timestamps". - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series "permit write-sealed memfd read-only shared mappings". - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series "Batch hugetlb vmemmap modification operations". - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series "Finish the create_empty_buffers() transition". - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series "mm: PCP high auto-tuning". - Roman Gushchin has contributed the patchset "mm: improve performance of accounted kernel memory allocations" which improves their performance by ~30% as measured by a micro-benchmark. - folio conversions from Kefeng Wang in the series "mm: convert page cpupid functions to folios". - Some kmemleak fixups in Liu Shixin's series "Some bugfix about kmemleak". - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series "handle memoryless nodes more appropriately". - khugepaged conversions from Vishal Moola in the series "Some khugepaged folio conversions". -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y FgeUPAD1oasg6CP+INZvCj34waNxwAc= =E+Y4 -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ... |
||
![]() |
1e0c505e13 |
asm-generic updates for v6.7
The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC40IACgkQYKtH/8kJ Uidhmw/9EX+aWSXGoObJ3fngaNSMw+PmrEuP8qEKBHxfKHcCdX3hc451Oh4GlhaQ tru91pPwgNvN2/rfoKusxT+V4PemGIzfNni/04rp+P0kvmdw5otQ2yNhsQNsfVmq XGWvkxF4P2GO6bkjjfR/1dDq7GtlyXtwwPDKeLbYb6TnJOZjtx+EAN27kkfSn1Ms R4Sa3zJ+DfHUmHL5S9g+7UD/CZ5GfKNmIskI4Mz5GsfoUz/0iiU+Bge/9sdcdSJQ kmbLy5YnVzfooLZ3TQmBFsO3iAMWb0s/mDdtyhqhTVmTUshLolkPYyKnPFvdupyv shXcpEST2XJNeaDRnL2K4zSCdxdbnCZHDpjfl9wfioBg7I8NfhXKpf1jYZHH1de4 LXq8ndEFEOVQw/zSpYWfQq1sux8Jiqr+UK/ukbVeFWiGGIUs91gEWtPAf8T0AZo9 ujkJvaWGl98O1g5wmBu0/dAR6QcFJMDfVwbmlIFpU8O+MEaz6X8mM+O5/T0IyTcD eMbAUjj4uYcU7ihKzHEv/0SS9Of38kzff67CLN5k8wOP/9NlaGZ78o1bVle9b52A BdhrsAefFiWHp1jT6Y9Rg4HOO/TguQ9e6EWSKOYFulsiLH9LEFaB9RwZLeLytV0W vlAgY9rUW77g1OJcb7DoNv33nRFuxsKqsnz3DEIXtgozo9CzbYI= =H1vH -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture |
||
![]() |
2a86ac30a6 |
Documentation: probes: Add a new ret_ip callback parameter
Add a new ret_ip callback parameter description.
Link: https://lore.kernel.org/all/169556257133.146934.13560704846459957726.stgit@devnote2/
Fixes:
|
||
![]() |
3dfbb555c9 |
mm, vmscan: remove ISOLATE_UNMAPPED
This isolate_mode_t flag is effectively unused since
|
||
![]() |
83121580f2 |
trace-vmscan-postprocess: sync with tracepoints updates
The script has fallen behind tracepoint changes for a while, fix it up. Most changes are mechanical (renames, removal of tracepoint parameters that are not used by the script). More notable change involves mm_vmscan_lru_isolate which is relying on the isolate_mode to determine if the inactive list is being scanned. However the parameter currently only indicates ISOLATE_UNMAPPED. We can use the lru parameter instead to determine which list is scanned, and stop checking isolate_mode. Link: https://lkml.kernel.org/r/20230914131637.12204-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
2c6d0950f6 |
tracing/user_events: Document persist event flags
Users need to know how to make events persist now that we allow for that. We also now allow the dynamic_events file to create events by utilizing the persist flag during event register. Add back in to documentation how /sys/kernel/tracing/dynamic_events can be used to create persistent user_events. Add a section under registering for the currently supported flags (USER_EVENT_REG_PERSIST) and the required permissions. Add a note under deleting that deleting a persistent event also requires sufficient permission. Link: https://lkml.kernel.org/r/20230912180704.1284-4-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
944834901a |
Documentation: Drop or replace remaining mentions of IA64
Drop or update mentions of IA64, as appropriate. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
![]() |
b70100f2e6 |
Probes updates for v6.6:
- kprobes: use struct_size() for variable size kretprobe_instance data structure. - eprobe: Simplify trace_eprobe list iteration. - probe events: Data structure field access support on BTF argument. . Update BTF argument support on the functions in the kernel loadable modules (only loaded modules are supported). . Move generic BTF access function (search function prototype and get function parameters) to a separated file. . Add a function to search a member of data structure in BTF. . Support accessing BTF data structure member from probe args by C-like arrow('->') and dot('.') operators. e.g. 't sched_switch next=next->pid vruntime=next->se.vruntime' . Support accessing BTF data structure member from $retval. e.g. 'f getname_flags%return +0($retval->name):string' . Add string type checking if BTF type info is available. This will reject if user specify ":string" type for non "char pointer" type. . Automatically assume the fprobe event as a function return event if $retval is used. - selftests/ftrace: Add BTF data field access test cases. - Documentation: Update fprobe event example with BTF data field. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmTycQkbHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqS8H/jeR1JhOzIXOvTw7XCFm MrSY/SKi8tQfV6lau2UmoYdbYvYjpqL34XLOQPNf2/lrcL2M9aNYXk9fbhlW8enx vkMyKQ0E5anixkF4vsTbEl9DaprxbpsPVACmZ/7VjQk2JuXIdyaNk8hno9LgIcEq udztb0o2HmDFqAXfRi0LvlSTAIwvXZ+usmEvYpaq1g2WwrCe7NHEYl42vMpj+h4H 9l4t5rA9JyPPX4yQUjtKGW5eRVTwDTm/Gn6DRzYfYzkkiBZv27qfovzBOt672LgG hyot+u7XeKvZx3jjnF7+mRWoH/m0dqyhyi/nPhpIE09VhgwclrbGAcDuR1x6sp01 PHY= =hBDN -----END PGP SIGNATURE----- Merge tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - kprobes: use struct_size() for variable size kretprobe_instance data structure. - eprobe: Simplify trace_eprobe list iteration. - probe events: Data structure field access support on BTF argument. - Update BTF argument support on the functions in the kernel loadable modules (only loaded modules are supported). - Move generic BTF access function (search function prototype and get function parameters) to a separated file. - Add a function to search a member of data structure in BTF. - Support accessing BTF data structure member from probe args by C-like arrow('->') and dot('.') operators. e.g. 't sched_switch next=next->pid vruntime=next->se.vruntime' - Support accessing BTF data structure member from $retval. e.g. 'f getname_flags%return +0($retval->name):string' - Add string type checking if BTF type info is available. This will reject if user specify ":string" type for non "char pointer" type. - Automatically assume the fprobe event as a function return event if $retval is used. - selftests/ftrace: Add BTF data field access test cases. - Documentation: Update fprobe event example with BTF data field. * tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation: tracing: Update fprobe event example with BTF field selftests/ftrace: Add BTF fields access testcases tracing/fprobe-event: Assume fprobe is a return event by $retval tracing/probes: Add string type check with BTF tracing/probes: Support BTF field access from $retval tracing/probes: Support BTF based data structure field access tracing/probes: Add a function to search a member of a struct/union tracing/probes: Move finding func-proto API and getting func-param API to trace_btf tracing/probes: Support BTF argument on module functions tracing/eprobe: Iterate trace_eprobe directly kernel: kprobes: Use struct_size() |
||
![]() |
34232fcfe9 |
Tracing updates for 6.6:
User visible changes: - Added a way to easier filter with cpumasks: # echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter - Show actual size of ring buffer after modifying the ring buffer size via buffer_size_kb. Currently it just returns what was written, but the actual size rounds up to the sub buffer size. Show that real size instead. Major changes: - Added "eventfs". This is the code that handles the inodes and dentries of tracefs/events directory. As there are thousands of events, and each event has several inodes and dentries that currently exist even when tracing is never used, they take up precious memory. Instead, eventfs will allocate the inodes and dentries in a JIT way (similar to what procfs does). There is now metadata that handles the events and subdirectories, and will create the inodes and dentries when they are used. Note, I also have patches that remove the subdirectory meta data, but will wait till the next merge window before applying them. It's a little more complex, and I want to make sure the dynamic code works properly before adding more complexity, making it easier to revert if need be. Minor changes: - Optimization to user event list traversal. - Remove intermediate permission of tracefs files (note the intermediate permission removes all access to the files so it is not a security concern, but just a clean up.) - Add the complex fix to FORTIFY_SOURCE to the kernel stack event logic. - Other minor clean ups. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEXtmkj8VMCiLR0IBM68Js21pW3nMFAmTwtAsUHHJvc3RlZHRA Z29vZG1pcy5vcmcACgkQ68Js21pW3nNOXRAAsslQT6alY4OeplC4x47+V6+6NiIA oDtOmWAqf7TsH9bukzRFD36rUly42O20RJDx9z0Q3iRc3vGxEawId8z6P0HmBwRb VSl5BryWvL5Wc5w94xS8EeCuC1MRfhVDyfbtVFmWigzfvd/f+hp71ViMPHUvrRJX KhzzNSBc4ir5E1lzfwa7meYTXzDwrQlZbYfdf5aH94IWAkqDj85PUZDJ7UmLZhXG CIglSpNFXZ0j19Wo/U6KZlHR1XfunBKungCzJ5Dbznc9YLWZTQXOIZF4YPKfPIJL ulRG9chwXY0nQWhG3xM1UHZLsAMSWw5i13a4ZN4d8FCNOgv8ttcJnfDk7ZYUS0Oz RmY1dGcSRKAZTUTjm8ZBtmyiUCc9kZAIk0fyEfIHtoDYXmhnvni3wuTnbRSdXaSi q4YkxPaLfX8Fn3QloCqqddt8iONu7BnbpZOhUCl2AtBib52gnTTF7+rQ6/0D3rjo SSuvEHhnjJhzk+3jM2odxjmTAztNT+yu6FbKXZUKPt1Kj9YHv1J9cEQw9/Etw+GV 8jQBe979D8hFJmDOJOT/O/TdPqE9mQoMNBt6Y8QnE4nbJWM+i/MBrThFpUSQhRCr 0Ya/HgR2QyRH7RmZW5o2H9mNtN+V9c7RxZW8erYzRbUs0YofK2OpGi9SrPzxWCke w6j0VVZHaxdPguM= =/s+e -----END PGP SIGNATURE----- Merge tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: "User visible changes: - Added a way to easier filter with cpumasks: # echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter - Show actual size of ring buffer after modifying the ring buffer size via buffer_size_kb. Currently it just returns what was written, but the actual size rounds up to the sub buffer size. Show that real size instead. Major changes: - Added "eventfs". This is the code that handles the inodes and dentries of tracefs/events directory. As there are thousands of events, and each event has several inodes and dentries that currently exist even when tracing is never used, they take up precious memory. Instead, eventfs will allocate the inodes and dentries in a JIT way (similar to what procfs does). There is now metadata that handles the events and subdirectories, and will create the inodes and dentries when they are used. Note, I also have patches that remove the subdirectory meta data, but will wait till the next merge window before applying them. It's a little more complex, and I want to make sure the dynamic code works properly before adding more complexity, making it easier to revert if need be. Minor changes: - Optimization to user event list traversal - Remove intermediate permission of tracefs files (note the intermediate permission removes all access to the files so it is not a security concern, but just a clean up) - Add the complex fix to FORTIFY_SOURCE to the kernel stack event logic - Other minor cleanups" * tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits) tracefs: Remove kerneldoc from struct eventfs_file tracefs: Avoid changing i_mode to a temp value tracing/user_events: Optimize safe list traversals ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon() tracing: Remove unused function declarations tracing/filters: Document cpumask filtering tracing/filters: Further optimise scalar vs cpumask comparison tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU tracing/filters: Enable filtering the CPU common field by a cpumask tracing/filters: Enable filtering a scalar field by a cpumask tracing/filters: Enable filtering a cpumask field by another cpumask tracing/filters: Dynamically allocate filter_pred.regex test: ftrace: Fix kprobe test for eventfs eventfs: Move tracing/events to eventfs eventfs: Implement removal of meta data from eventfs eventfs: Implement functions to create files and dirs when accessed eventfs: Implement eventfs lookup, read, open functions eventfs: Implement eventfs file add functions ... |
||
![]() |
a2439a4c90 |
Documentation: tracing: Update fprobe event example with BTF field
Update fprobe event example with BTF data structure field specification. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
fa828efb9c |
tracing/filters: Document cpumask filtering
Cpumask, scalar and CPU fields can now be filtered by a user-provided cpumask, document the syntax. Link: https://lkml.kernel.org/r/20230707172155.70873-10-vschneid@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Leonardo Bras <leobras@redhat.com> Cc: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Valentin Schneider <vschneid@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
d56b699d76 |
Documentation: Fix typos
Fix typos in Documentation. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
![]() |
44aeec836d |
Char/Misc and other driver subsystem updates for 6.5-rc1
Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz recBPLH0ZACKl0wPl4iZ =A83A -----END PGP SIGNATURE----- Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits) bsr: fix build problem with bsr_class static cleanup comedi: make all 'class' structures const char: xillybus: make xillybus_class a static const structure xilinx_hwicap: make icap_class a static const structure virtio_console: make port class a static const structure ppdev: make ppdev_class a static const structure char: misc: make misc_class a static const structure /dev/mem: make mem_class a static const structure char: lp: make lp_class a static const structure dsp56k: make dsp56k_class a static const structure bsr: make bsr_class a static const structure oradax: make 'cl' a static const structure hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation samples: pfsm: add CC_CAN_LINK dependency misc: fastrpc: check return value of devm_kasprintf() coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() ... |
||
![]() |
d2a6fd45c5 |
Probes updates for v6.5:
- fprobe: Pass return address to the fprobe entry/exit callbacks so that the callbacks don't need to analyze pt_regs/stack to find the function return address. - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN flags so that those are not set at once. - fprobe events: . Add a new fprobe events for tracing arbitrary function entry and exit as a trace event. . Add a new tracepoint events for tracing raw tracepoint as a trace event. This allows user to trace non user-exposed tracepoints. . Move eprobe's event parser code into probe event common file. . Introduce BTF (BPF type format) support to kernel probe (kprobe, fprobe and tracepoint probe) events so that user can specify traced function arguments by name. This also applies the type of argument when fetching the argument. . Introduce '$arg*' wildcard support if BTF is available. This expands the '$arg*' meta argument to all function argument automatically. . Check the return value types by BTF. If the function returns 'void', '$retval' is rejected. . Add some selftest script for fprobe events, tracepoint events and BTF support. . Update documentation about the fprobe events. . Some fixes for above features, document and selftests. - selftests for ftrace (except for new fprobe events): . Add a test case for multiple consecutive probes in a function which checks if ftrace based kprobe, optimized kprobe and normal kprobe can be defined in the same target function. . Add a test case for optimized probe, which checks whether kprobe can be optimized or not. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSa+9MACgkQ2/sHvwUr PxsmOAgAmUOIWtvH5py7AZpIRhCj8B18F6KnT7w2hByCsRxf7SaCqMhpBCk9VnYv 9fJFBHpvYRJEmpHoH3o2ET5AGfKVNac9z96AGI2qJ4ECWITd6I5+WfTdZ5ueVn2d f6DQ10mHXDHSMFbuqfYWSHtkeivJpWpUNHhwzPb4doNOe06bZNfVuSgnksFg1at5 kq16HbvGnhPzdO4YHmvqwjmRHr5/nCI1KDE9xIBcqNtWFbiRigC11zaZEUkLX+vT F63ShyfCK718AiwDfnjXpGkXAiVOZuAIR8RELaSqQ92YHCFKq5k9K4++WllPR5f9 AxjVultFDiCd4oSPgYpQkjuZdFq9NA== =IhmY -----END PGP SIGNATURE----- Merge tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - fprobe: Pass return address to the fprobe entry/exit callbacks so that the callbacks don't need to analyze pt_regs/stack to find the function return address. - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN flags so that those are not set at once. - fprobe events: - Add a new fprobe events for tracing arbitrary function entry and exit as a trace event. - Add a new tracepoint events for tracing raw tracepoint as a trace event. This allows user to trace non user-exposed tracepoints. - Move eprobe's event parser code into probe event common file. - Introduce BTF (BPF type format) support to kernel probe (kprobe, fprobe and tracepoint probe) events so that user can specify traced function arguments by name. This also applies the type of argument when fetching the argument. - Introduce '$arg*' wildcard support if BTF is available. This expands the '$arg*' meta argument to all function argument automatically. - Check the return value types by BTF. If the function returns 'void', '$retval' is rejected. - Add some selftest script for fprobe events, tracepoint events and BTF support. - Update documentation about the fprobe events. - Some fixes for above features, document and selftests. - selftests for ftrace (in addition to the new fprobe events): - Add a test case for multiple consecutive probes in a function which checks if ftrace based kprobe, optimized kprobe and normal kprobe can be defined in the same target function. - Add a test case for optimized probe, which checks whether kprobe can be optimized or not. * tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/probes: Fix tracepoint event with $arg* to fetch correct argument Documentation: Fix typo of reference file name tracing/probes: Fix to return NULL and keep using current argc selftests/ftrace: Add new test case which checks for optimized probes selftests/ftrace: Add new test case which adds multiple consecutive probes in a function Documentation: tracing/probes: Add fprobe event tracing document selftests/ftrace: Add BTF arguments test cases selftests/ftrace: Add tracepoint probe test case tracing/probes: Add BTF retval type support tracing/probes: Add $arg* meta argument for all function args tracing/probes: Support function parameters if BTF is available tracing/probes: Move event parameter fetching code to common parser tracing/probes: Add tracepoint support on fprobe_events selftests/ftrace: Add fprobe related testcases tracing/probes: Add fprobe events for tracing function entry and exit. tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN fprobe: Pass return address to the handlers |
||
![]() |
cccf0c2ee5 |
Tracing updates for 6.5:
- Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJy6ixQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnzRAPsEI2YgjaJSHnuPoGRHbrNil6pq66wY LYaLizGI4Jv9BwEAqdSdcYcMiWo1SFBAO8QxEDM++BX3zrRyVgW8ahaTNgs= =TF0C -----END PGP SIGNATURE----- Merge tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs" |
||
![]() |
fc30ace06f |
tracing: Fix warnings when building htmldocs for function graph retval
When building htmldocs, the following warnings appear:
Documentation/trace/ftrace.rst:2797: WARNING: Literal block expected; none found.
Documentation/trace/ftrace.rst:2816: WARNING: Literal block expected; none found.
So fix it.
Link: https://lore.kernel.org/all/20230623143517.19ffc6c0@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20230623071728.25688-1-pengdonglin@sangfor.com.cn
Fixes:
|
||
![]() |
a2bd0c08a4 |
Documentation: Fix typo of reference file name
Fix a typo of Documentation/trace/fprobe.rst. Link: https://lore.kernel.org/all/168584575125.2056209.5771945721143181243.stgit@mhiramat.roam.corp.google.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306040144.aD72UzkF-lkp@intel.com/ Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
![]() |
e88ed227f6 |
tracing/timerlat: Add user-space interface
Going a step further, we propose a way to use any user-space workload as the task waiting for the timerlat timer. This is done via a per-CPU file named osnoise/cpu$id/timerlat_fd file. The tracef_fd allows a task to open at a time. When a task reads the file, the timerlat timer is armed for future osnoise/timerlat_period_us time. When the timer fires, it prints the IRQ latency and wakes up the user-space thread waiting in the timerlat_fd. The thread then starts to run, executes the timerlat measurement, prints the thread scheduling latency and returns to user-space. When the thread rereads the timerlat_fd, the tracer will print the user-ret(urn) latency, which is an additional metric. This additional metric is also traced by the tracer and can be used, for example of measuring the context switch overhead from kernel-to-user and user-to-kernel, or the response time for an arbitrary execution in user-space. The tracer supports one thread per CPU, the thread must be pinned to the CPU, and it cannot migrate while holding the timerlat_fd. The reason is that the tracer is per CPU (nothing prohibits the tracer from allowing migrations in the future). The tracer monitors the migration of the thread and disables the tracer if detected. The timerlat_fd is only available for opening/reading when timerlat tracer is enabled, and NO_OSNOISE_WORKLOAD is set. The simplest way to activate this feature from user-space is: -------------------------------- %< ----------------------------------- int main(void) { char buffer[1024]; int timerlat_fd; int retval; long cpu = 0; /* place in CPU 0 */ cpu_set_t set; CPU_ZERO(&set); CPU_SET(cpu, &set); if (sched_setaffinity(gettid(), sizeof(set), &set) == -1) return 1; snprintf(buffer, sizeof(buffer), "/sys/kernel/tracing/osnoise/per_cpu/cpu%ld/timerlat_fd", cpu); timerlat_fd = open(buffer, O_RDONLY); if (timerlat_fd < 0) { printf("error opening %s: %s\n", buffer, strerror(errno)); exit(1); } for (;;) { retval = read(timerlat_fd, buffer, 1024); if (retval < 0) break; } close(timerlat_fd); exit(0); } -------------------------------- >% ----------------------------------- When disabling timerlat, if there is a workload holding the timerlat_fd, the SIGKILL will be sent to the thread. Link: https://lkml.kernel.org/r/69fe66a863d2792ff4c3a149bf9e32e26468bb3a.1686063934.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: William White <chwhite@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
83f74441bc |
ftrace: Show all functions with addresses in available_filter_functions_addrs
Adding new available_filter_functions_addrs file that shows all available functions (same as available_filter_functions) together with addresses, like: # cat available_filter_functions_addrs | head ffffffff81000770 __traceiter_initcall_level ffffffff810007c0 __traceiter_initcall_start ffffffff81000810 __traceiter_initcall_finish ffffffff81000860 trace_initcall_finish_cb ... Note displayed address is the patch-site address and can differ from /proc/kallsyms address. It's useful to have address avilable for traceable symbols, so we don't need to allways cross check kallsyms with available_filter_functions (or the other way around) and have all the data in single file. For backwards compatibility reasons we can't change the existing available_filter_functions file output, but we need to add new file. The problem is that we need to do 2 passes: - through available_filter_functions and find out if the function is traceable - through /proc/kallsyms to get the address for traceable function Having available_filter_functions symbols together with addresses allow us to skip the kallsyms step and we are ok with the address in available_filter_functions_addr not being the function entry, because kprobe_multi uses fprobe and that handles both entry and patch-site address properly. We have 2 interfaces how to create kprobe_multi link: a) passing symbols to kernel 1) user gathers symbols and need to ensure that they are trace-able -> pass through available_filter_functions file 2) kernel takes those symbols and translates them to addresses through kallsyms api 3) addresses are passed to fprobe/ftrace through: register_fprobe_ips -> ftrace_set_filter_ips b) passing addresses to kernel 1) user gathers symbols and needs to ensure that they are trace-able -> pass through available_filter_functions file 2) user takes those symbols and translates them to addresses through /proc/kallsyms 3) addresses are passed to the kernel and kernel calls: register_fprobe_ips -> ftrace_set_filter_ips The new available_filter_functions_addrs file helps us with option b), because we can make 'b 1' and 'b 2' in one step - while filtering traceable functions, we get the address directly. Link: https://lore.kernel.org/linux-trace-kernel/20230611130029.1202298-1-jolsa@kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Tested-by: Jackie Liu <liuyun01@kylinos.cn> # x86 Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
fa50d6b8a5 |
coresight: Updates for v6.5
CoreSight and hwtracing subsystem updates for v6.5 includes: - Fixes to the CTI module reference leaks. This involves, redesign of how the helper devices are tracked and CTI devices have been converted to helper devices. - Fix removal of the trctraceidr file from sysfs for ETMs. - Match all ETMv4 instances based on the ETMv4 architected registers and the CoreSight Component ID (CID), than having to add individual PIDs for CPUs. - Add support for Dummy CoreSight source and sink drivers. - Add James Clark as Reviewer for the CoreSight kernel drivers - Fixes to HiSilicon PCIe Tune and Trace Device driver Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuFy0byloRoXZHaWBxcXRZPKyBqEFAmSS/goACgkQxcXRZPKy BqFShQ//Z25Qnf0y2VdOBgZ1xWYeOTjkeQ2AVYE2hepV78N5rnI8BgcwlBNrF5IA uTu2U+nSenkCurWk+wOrmXaQ2SXkEEp2Gsm866WzeL4OjWsqxpdoZ1l2u7/YqxMK 4QIP2ELS71KcQMIIJ31eYDSMro/gA8xDPh2QGhZKihUQAsoVQOghX7Y1eoT+4a/V pvsngu71iM45jHR1eFkp9/rQCKhy9OA58Q8gtg21uotOja9jvHQpRZ4TGN7en0CP RDVmIaxRDh3sPWoVpIPYs3nL8DX2NeSX5BVC/xq2P0UAHN6C9rp+Kom1XN7VZqS6 UdgyNw1iulwtGW0zF5jwZrj5ZGMY4CFQhS6R3/DF5ohzuSwtSOY32cYyLKrUjmpx W0Nj7Pu/UaHU/kTu5+qItgTp0FP6du9p2VnZZuhroGLkGRSi2u392gKmPnKbErx5 8tLo2ucAw1Kasm7pef2rj9M9etcWJws+dD1qWg96fvuKvJQX9+milweyg0I4NTXy p8GHpITZ65chWUJjqlxgnbvhB2V1eKP6bpG3sjzhCC2h9yXyzn4grOoSu/XNVQdx W3ldxRMlsoIFBbUb42yJQROSVezaYVC+5sk+fufRVbNR3b5ZmJOGYiCUtM+MMvtj q/1M/liPOYIf6Ix94EzxujdU12Ki5XLb5rWZqS3Gvebc8OG+o9E= =XWfo -----END PGP SIGNATURE----- Merge tag 'coresight-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Updates for v6.5 CoreSight and hwtracing subsystem updates for v6.5 includes: - Fixes to the CTI module reference leaks. This involves, redesign of how the helper devices are tracked and CTI devices have been converted to helper devices. - Fix removal of the trctraceidr file from sysfs for ETMs. - Match all ETMv4 instances based on the ETMv4 architected registers and the CoreSight Component ID (CID), than having to add individual PIDs for CPUs. - Add support for Dummy CoreSight source and sink drivers. - Add James Clark as Reviewer for the CoreSight kernel drivers - Fixes to HiSilicon PCIe Tune and Trace Device driver Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits) hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() Documentation: trace: Add documentation for Coresight Dummy Trace dt-bindings: arm: Add support for Coresight dummy trace Coresight: Add coresight dummy driver MAINTAINERS: coresight: Add James Clark as Reviewer coresight: etm4x: Match all ETM4 instances based on DEVARCH and DEVTYPE coresight: etm4x: Make etm4_remove_dev() return void coresight: etm4x: Fix missing trctraceidr file in sysfs coresight: Fix CTI module refcount leak by making it a helper device coresight: Enable and disable helper devices adjacent to the path coresight: Refactor out buffer allocation function for ETR coresight: Make refcount a property of the connection coresight: Store in-connections as well as out-connections coresight: Simplify connection fixup mechanism coresight: Store pointers to connections rather than an array of them ... |
||
![]() |
6373c463ac |
hwtracing: hisi_ptt: Export available filters through sysfs
The PTT can only filter the traced TLP headers by the Root Ports or the Requester ID of the Endpoint, which are located on the same PCIe core of the PTT device. The filter value used is derived from the BDF number of the supported Root Port or the Endpoint. It's not friendly enough for the users since it requires the user to be familiar enough with the platform and calculate the filter value manually. This patch export the available filters through sysfs. Each available filters is presented as an individual file with the name of the BDF number of the related PCIe device. The files are created under $(PTT PMU dir)/available_root_port_filters and $(PTT PMU dir)/available_requester_filters respectively. The filter value can be known by reading the related file. Then the users can easily know the available filters for trace and get the filter values without calculating. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230621092804.15120-4-yangyicong@huawei.com |
||
![]() |
556ef09392 |
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
The PCIe devices supported by the PTT trace can be removed/rescanned by hotplug or through sysfs. Add support for dynamically updating the available filter list by registering a PCI bus notifier block. Then user can always get latest information about available tracing filters and driver can block the invalid filters of which related devices no longer exist in the system. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230621092804.15120-3-yangyicong@huawei.com |
||
![]() |
21c094d3f8 |
tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex
Add documentation for the two newly introduced options for the function_graph tracer. The funcgraph-retval option is used to control whether or not to display the return value, while the funcgraph-retval-hex option is used to control the display format of the return value. Link: https://lkml.kernel.org/r/2b5635f05146161b54c9ea6307e25efe5ccebdad.1680954589.git.pengdonglin@sangfor.com.cn Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
![]() |
3b79104f80 |
Documentation: trace: Add documentation for Coresight Dummy Trace
Add documentation for Coresight Dummy Trace under trace/coresight. Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Hao Zhang <quic_hazha@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230602084149.40031-4-quic_hazha@quicinc.com |