mirror of
https://github.com/torvalds/linux
synced 2024-07-05 18:00:39 +00:00
a2316dda07
6062 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
3d54351c64 |
lsm/stable-6.10 PR 20240617
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmZwh44UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNRBA//Q09J/SADHi63fjpStx+Gvo5h6TbM L4gqYsjxpi7CfXFwlBtFRjk9Q0osRDxbDWTuZ8gMcJONlRdHpZFil2gYSEacImsn tAkrQpV32U1oNua+kgoIkQTHwNIKjA9odYZ4pyJ0AZvnB5Z62B841r8GAaTADg++ fGOuCBYZeuioCAjPUN2KZtkCKdhiu823Gwe2z9U6SJyCdPqRFjpBuumDoNvCTrCB UJuc5DqWSNk2rZXZQG6RSLeOOZZwRf9s2ATU96T/9Lp0m6qqxPPisHkWscjhx5Ve W7z2IWGFrNzJ8ABKwBK/NUMQbs3WzsepyPqZdoo//PkhMjQlfb+5iPitJWM6qmdM 6jgj2HkDzX2OtR9u6VOcOKKwz4NQnf4JcHRUDjq8vQ3eKYOTcDLx4VR8O/Ullmhf pZL4klNXpBrw7DLYurTlpbm9jUmMCev9DvuSYJmyRjq7jA+8Cph6+clGriIbljqn 9hCqSnbufDxySwB0unYu9zwnC4bN+Yzcgr4qYFoA+zdj5eYloaJvPhwOh6MPsQaO DJlCt6Wfw4SqD3afxaJnzw4/SBRuPA8ISoxTXVJUg7Q+NfUI8HBDO4YihiqJ7cm0 yvD0mFvweJVEpX2slDyob58xYgkmL8TaIPErJ9A/EO30W0nm+nQzXDR+cOa9VqAc txcTscOv5YMLLMk= =nYky -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm fix from Paul Moore: "A single LSM/IMA patch to fix a problem caused by sleeping while in a RCU critical section" * tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: ima: Avoid blocking in RCU read-side critical section |
||
|
Linus Torvalds
|
e6b324fbf2 |
19 hotfixes, 8 of which are cc:stable.
Mainly MM singleton fixes. And a couple of ocfs2 regression fixes. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZnCEQAAKCRDdBJ7gKXxA jmgSAQDk3BYs1n67cnwx/Zi04yMYDyfYTCYg2udPfT2a+GpmbwD+N5dJd/vCztXH 5eLpP11xd/yr2+I9FefyZeUuA80KtgQ= =2agY -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Mainly MM singleton fixes. And a couple of ocfs2 regression fixes" * tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: kcov: don't lose track of remote references during softirqs mm: shmem: fix getting incorrect lruvec when replacing a shmem folio mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick mm: fix possible OOB in numa_rebuild_large_mapping() mm/migrate: fix kernel BUG at mm/compaction.c:2761! selftests: mm: make map_fixed_noreplace test names stable mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default gcov: add support for GCC 14 zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING mm: huge_memory: fix misused mapping_large_folio_support() for anon folios lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get() lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n MAINTAINERS: remove Lorenzo as vmalloc reviewer Revert "mm: init_mlocked_on_free_v3" mm/page_table_check: fix crash on ZONE_DEVICE gcc: disable '-Warray-bounds' for gcc-9 ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger() ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty() |
||
|
Linus Torvalds
|
5cf81d7b0d |
hardening fixes for v6.10-rc5
- yama: document function parameter (Christian Göttsche_ - mm/util: Swap kmemdup_array() arguments (Jean-Philippe Brucker) - kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX() - MAINTAINERS: Update entries for Kees Cook -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmZwfVsACgkQiXL039xt wCYfuQ/+KidYsVlf9xhc9eU6XQQZmPXhQT7QCWZEX2xj6xdob5Pv+YBHrL2dGCvn 4b7xqWFqrkjDGVEQW5zF7mmn9T7a3c6+czKUR6rSueB6aO+NFns961rCBViYWxLN /xgee/1iCRg5iwg6SfP5CR9NIr9h6jU9d4Mv7cT2rwy913bCeQa89gkqCD2LJXmr m9HZgT0vsgfUO3+XsA42LKpP+dP+8UHtTumNOZrqnzZr9k69io9ncRjzmS/LjQPL ILo3QQ6QIV8bkSlOogMLZNHRc84Sc8x91KUM42ZUhV2tNxpNG6lt6UZXPATbvq/g TLHxvayjYOTWwF2DmlXncF/rtDLugsg/lyGS4tPjRX00Iq+jaTm1HOVJQ0rDUeLI lmMlGyDzAPK7UXU3hmx+i3sOuyt6HbfJYwF/7ErR0plDaWIbUrqy7uVxarag3qnc i4Lrr/5OdThUKl1jTBIBmfrOELI+m5opMvF2zUpS1BgHUw1U33rHWxQRoW1iTUnH Df11bl0NycmxyY0Vv4M1dnm8uP7XpjfFbdi87xj4+lGGKTM+wM9iQhrHVLBeIdPa dntZfsFB2ZF8LYlNXVnOcWLJjQP8SC99VCMsp/Un6AVmu/HMBP/+cZ6LHGWcUoWz qVrxqu9OjnK7jqsaDbDm3TLroCzL/8/oLRbqXuGJNamLOxz9oW0= =RFT7 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - yama: document function parameter (Christian Göttsche) - mm/util: Swap kmemdup_array() arguments (Jean-Philippe Brucker) - kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX() - MAINTAINERS: Update entries for Kees Cook * tag 'hardening-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: MAINTAINERS: Update entries for Kees Cook kunit/overflow: Adjust for __counted_by with DEFINE_RAW_FLEX() yama: document function parameter mm/util: Swap kmemdup_array() arguments |
||
David Hildenbrand
|
384a746bb5 |
Revert "mm: init_mlocked_on_free_v3"
There was insufficient review and no agreement that this is the right
approach.
There are serious flaws with the implementation that make processes using
mlock() not even work with simple fork() [1] and we get reliable crashes
when rebooting.
Further, simply because we might be unmapping a single PTE of a large
mlocked folio, we shouldn't zero out the whole folio.
... especially because the code can also *corrupt* urelated memory because
kernel_init_pages(page, folio_nr_pages(folio));
Could end up writing outside of the actual folio if we work with a tail
page.
Let's revert it. Once there is agreement that this is the right approach,
the issues were fixed and there was reasonable review and proper testing,
we can consider it again.
[1] https://lkml.kernel.org/r/4da9da2f-73e4-45fd-b62f-a8a513314057@redhat.com
Link: https://lkml.kernel.org/r/20240605091710.38961-1-david@redhat.com
Fixes:
|
||
GUO Zihua
|
9a95c5bfbf |
ima: Avoid blocking in RCU read-side critical section
A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: |
||
Christian Göttsche
|
f7d3b1ffc6 |
yama: document function parameter
Document the unused function parameter of yama_relation_cleanup() to please kernel doc warnings. Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240315125418.273104-2-cgzones@googlemail.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
Tetsuo Handa
|
c6144a2116 |
tomoyo: update project links
TOMOYO project has moved to SourceForge.net . Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> |
||
Mickaël Salaün
|
88da52ccd6
|
landlock: Fix d_parent walk
The WARN_ON_ONCE() in collect_domain_accesses() can be triggered when
trying to link a root mount point. This cannot work in practice because
this directory is mounted, but the VFS check is done after the call to
security_path_link().
Do not use source directory's d_parent when the source directory is the
mount point.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+bf4903dc7e12b18ebc87@syzkaller.appspotmail.com
Fixes:
|
||
|
Linus Torvalds
|
b0a9ba13ff |
hardening fixes for v6.10-rc1
- loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression (Stephen Boyd) - ubsan: Restore dependency on ARCH_HAS_UBSAN - kunit/fortify: Fix memcmp() test to be amplitude agnostic -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmZP0w0WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJqYDEACWaY0Xjig6Izo+B+85IozTLf2R Wv3zlOjUhjbRn7enzhVBRRfU216nl/wp8s7pKhNYCEZ7gJ+04hYtZoLY6YV7jtZ0 RAvpwc1dmUm7RZIBxjnzqiNTdttNBniPDE47goV0Yi9JVSDFY1Y/P5GwiAr0PO6W kt1+WBr2zADNpTZziH8MZou7jfK+y1bOZw8rUUFMODrMc0buuLGO2h+lZqASJXNs 5NHPUOoJsZHvQxN/YSyE555VycpoyWiwMvA1XOz1NVKdr1eFP1heu88AnIRKOD7o cMz6W/yUZ+4dYr2yydDGNX+QvFmZuvPz0oXAlI7BAblpT0UU7xv0jaioAhIam87U WxVQSOgkLQBw6Ym79W66HplizCVfEl9aUAYDSK5UJlwdpNE/j16XLYDLKxDi0wUZ pjUy5CF0X7FFNyY7Kp5flqzKrQG31vfqZf/yWhtWu258x604LR6CTkO06IJDINx0 UUrbehie3bGnbu5FS0oVKGH37Mq0aRn4Xk2aUZaFf1Vz/YtU4Wo3FbtyOyFZsdpl aCNyYzmNmfVijDQlLshy6HBACeLPV2DjIJ8pcC74abUV1FX6VOvIDsTy4ELkm9BF WZ8LNryo79lFsFMThhwfCDHubhXoaLjkl4rpOB5x+Ld0q+GgfIb5jMfF507YxrRj 3KxJJKXzUKNf+JFnjg== =VTTF -----END PGP SIGNATURE----- Merge tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression (Stephen Boyd) - ubsan: Restore dependency on ARCH_HAS_UBSAN - kunit/fortify: Fix memcmp() test to be amplitude agnostic * tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kunit/fortify: Fix memcmp() test to be amplitude agnostic ubsan: Restore dependency on ARCH_HAS_UBSAN loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression |
||
Jarkko Sakkinen
|
050bf3c793 |
KEYS: trusted: Do not use WARN when encode fails
When asn1_encode_sequence() fails, WARN is not the correct solution.
1. asn1_encode_sequence() is not an internal function (located
in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.
It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.
Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.
Cc: stable@vger.kernel.org # v5.13+
Fixes:
|
||
|
Jarkko Sakkinen
|
ffcaa2172c |
KEYS: trusted: Fix memory leak in tpm2_key_encode()
'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.
Cc: stable@vger.kernel.org # +v5.13
Fixes:
|
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
Stephen Boyd
|
ce0d73ef8d |
loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression
If modules are built compressed, and LoadPin is enforcing by default, we must have in-kernel module decompression enabled (MODULE_DECOMPRESS). Modules will fail to load without decompression built into the kernel because they'll be blocked by LoadPin. Add a depends on clause to prevent this combination. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240514224839.2526112-1-swboyd@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> |
||
|
Linus Torvalds
|
ff9a79307f |
Kbuild updates for v6.10
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
||
|
Linus Torvalds
|
2fc0e7892c |
Landlock updates for v6.10-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZkYGahAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSaxUBAL1USJI2DUo+hJTDHqXdVZGEE6VfYnmEhIur NZfsti4UAQCabAej7+NHzh1jAnnKMJFbcyl4LRy99anJGlEWq9ExDA== =fViz -----END PGP SIGNATURE----- Merge tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "This brings ioctl control to Landlock, contributed by Günther Noack. This also adds him as a Landlock reviewer, and fixes an issue in the sample" * tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: MAINTAINERS: Add Günther Noack as Landlock reviewer fs/ioctl: Add a comment to keep the logic in sync with LSM policies MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c landlock: Document IOCTL support samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV selftests/landlock: Exhaustive test for the IOCTL allow-list selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets selftests/landlock: Test IOCTLs on named pipes selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH) selftests/landlock: Test IOCTL with memfds selftests/landlock: Test IOCTL support landlock: Add IOCTL access right for character and block devices samples/landlock: Fix incorrect free in populate_ruleset_net |
||
|
Linus Torvalds
|
353ad6c083 |
integrity-v6.10
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZkQD2xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b81APwINCoiLDB0L9KkyUhQjqvLLZCS85u9
Qo3/wdUGAb2tygD/RYKJgtGxvqO1Ap1IysytKHId0yo+vokdXG5stpMPJQE=
=dIrw
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Two IMA changes, one EVM change, a use after free bug fix, and a code
cleanup to address "-Wflex-array-member-not-at-end" warnings:
- The existing IMA {ascii, binary}_runtime_measurements lists include
a hard coded SHA1 hash. To address this limitation, define per TPM
enabled hash algorithm {ascii, binary}_runtime_measurements lists
- Close an IMA integrity init_module syscall measurement gap by
defining a new critical-data record
- Enable (partial) EVM support on stacked filesystems (overlayfs).
Only EVM portable & immutable file signatures are copied up, since
they do not contain filesystem specific metadata"
* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add crypto agility support for template-hash algorithm
evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
ima: re-evaluate file integrity on file metadata change
evm: Store and detect metadata inode attributes changes
ima: Move file-change detection variables into new structure
evm: Use the metadata inode to calculate metadata hash
evm: Implement per signature type decision in security_inode_copy_up_xattr
security: allow finer granularity in permitting copy-up of security xattrs
ima: Rename backing_inode to real_inode
integrity: Avoid -Wflex-array-member-not-at-end warnings
ima: define an init_module critical data record
ima: Fix use-after-free on a dentry's dname.name
|
||
|
Linus Torvalds
|
ccae19c623 |
selinux/stable-6.10 PR 20240513
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmZCWd4UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMFMQ/8DlQhbe+NzeAjBg2O7RqNKoE/UU2l JAkzgQ7h35/sgsfDIEhPv0VOzq2cwLSaw5/qSGGrQDWR4AKz55HvBSJQDElgzPo2 wtL2lozjJ03+P391aeXEHdkqzgp2F3c6oNthIcFvRmi3EVcWr7eqnjWU+bJzFtMA z4IgX01yiUF6EMdTJcWjSLclk3dOqHWPV657RadYyp2pr3u9rc9gqgxichs0dQW0 X/vexUBg81TdSeHS+u9Jgrz+TCsQdP3CHSFibXDv1rX89bqCbG9wYNTyTBHH9f0j LPpV2bKaesxIZV6dZyIKKSqCtHGBcjcJEjUbl7JFkQOS/a8NPMDH2ZYkHqbyq4BH SX+kRhthmXZiZ2IWhMRikaE4FBIWI7JAC4riKB2Dd0RzJrNEgaawU0wM+evKai9F s3GCk/P7wnTT4GlDHSkYEiiRF9c3DNkfVb9mqG78PRMR4X+z/0dsX5iaJTwlyMxo 69JSoTNzMxVdDtvD+K89V7GCm8NmGFjLwQUqb282L/6ibzC/5CCUQXn8ZWvNRPql IUoQhKbveCWR3m9vAMeGpE61oNgFp0mHj3Zb/vE5Yu7HxOn2y1lFv2XGxR6bGyTF T53AaHM15uFomhqhG+iM3b4FDhNIJpbUc4MJsq3iMgFC941n1ceXyeBEgf31+Z2x k1ZlxqLAWn05auA= =2Wbi -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Attempt to pre-allocate the SELinux status page so it doesn't appear to userspace that we are skipping SELinux policy sequence numbers - Reject invalid SELinux policy bitmaps with an error at policy load time - Consistently use the same type, u32, for ebitmap offsets - Improve the "symhash" hash function for better distribution on common policies - Correct a number of printk format specifiers in the ebitmap code - Improved error checking in sel_write_load() - Ensure we have a proper return code in the filename_trans_read_helper_compat() function - Make better use of the current_sid() helper function - Allow for more hash table statistics when debugging is enabled - Migrate from printk_ratelimit() to pr_warn_ratelimited() - Miscellaneous cleanups and tweaks to selinux_lsm_getattr() - More consitification work in the conditional policy space * tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: constify source policy in cond_policydb_dup() selinux: avoid printk_ratelimit() selinux: pre-allocate the status page selinux: clarify return code in filename_trans_read_helper_compat() selinux: use u32 as bit position type in ebitmap code selinux: improve symtab string hashing selinux: dump statistics for more hash tables selinux: make more use of current_sid() selinux: update numeric format specifiers for ebitmaps selinux: improve error checking in sel_write_load() selinux: cleanup selinux_lsm_getattr() selinux: reject invalid ebitmaps |
||
|
Linus Torvalds
|
4cd4e4b881 |
lsm/stable-6.10 PR 20240513
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmZCWeoUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOb/Q//V68LTU4pJF/2DaxC4rA9mDXC/iey AF1v8ajzWOuPA9X0xTkYRKkXY7llgqVCjJmKhtqA9elPEfZyRXhvZikoBnfb7TvS dh3nEh/3u2I09PnewBZdj4Bq1owQ+JDfxVzTpMQ433lNri23zcuszI8IB3ePvHe2 CoMs/UxbB5D6JEBOIiK1GFqiv2gt+293cw0RorD4DmUinAPU1WOqk9pdxuIwwONM PyJ4kHcQJ7aU6nAfSPQbFzrqaZCvoy2gKaCtslQ9ASlOWRtFbSbccKu29g8vbPcg Pql70xzYcjr5iXcSpD3d84LHzFOYBuSWrdqRFeP4w9tZzCAYGTlfvltAnQImbg2B GbDFogNB2hZbUq2zf9hhXcmhGVr4tqlxeujsGPCiivZfVSPR/9VyWvL9dH6R/ooE YZbmc1DNSNPkvozbejJ48rcI+nb5iCe7FVMeKODSvQFMpzAn4WsCb+svMhRzQ1h4 f1XkJ9TGxNEkBoVd0LpOfiPgB+HsFWRy/h9I5lQdAYr/H1MU4bAnKT761k8zPdXr Ne03zv0uvoOPHp5ObeKc5krWjJsuRffT/r9hegUiWfww/sANo7dfx2Oo22YoTo86 siK27qa/tiWn11/WGM8ozW3Ni8GcU496gO4n7RkVrVjdzpl6JG42CtRwaNYM7q6v 1Ntmg9H/wZllMg4= =F3Tz -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - The security/* portion of the effort to remove the empty sentinel elements at the end of the ctl_table arrays - Update the file list associated with the LSM / "SECURITY SUBSYSTEM" entry in the MAINTAINERS file (and then fix a typo in then update) * tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: MAINTAINERS: repair file entry in SECURITY SUBSYSTEM MAINTAINERS: update the LSM file list lsm: remove the now superfluous sentinel element from ctl_table array |
||
|
Linus Torvalds
|
1b294a1f35 |
Networking changes for 6.10.
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
||
Davide Caratti
|
8ec9897ec2 |
netlabel: fix RCU annotation for IPv4 options on socket creation
Xiumei reports the following splat when netlabel and TCP socket are used:
=============================
WARNING: suspicious RCU usage
6.9.0-rc2+ #637 Not tainted
-----------------------------
net/ipv4/cipso_ipv4.c:1880 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ncat/23333:
#0: ffffffff906030c0 (rcu_read_lock){....}-{1:2}, at: netlbl_sock_setattr+0x25/0x1b0
stack backtrace:
CPU: 11 PID: 23333 Comm: ncat Kdump: loaded Not tainted 6.9.0-rc2+ #637
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<TASK>
dump_stack_lvl+0xa9/0xc0
lockdep_rcu_suspicious+0x117/0x190
cipso_v4_sock_setattr+0x1ab/0x1b0
netlbl_sock_setattr+0x13e/0x1b0
selinux_netlbl_socket_post_create+0x3f/0x80
selinux_socket_post_create+0x1a0/0x460
security_socket_post_create+0x42/0x60
__sock_create+0x342/0x3a0
__sys_socket_create.part.22+0x42/0x70
__sys_socket+0x37/0xb0
__x64_sys_socket+0x16/0x20
do_syscall_64+0x96/0x180
? do_user_addr_fault+0x68d/0xa30
? exc_page_fault+0x171/0x280
? asm_exc_page_fault+0x22/0x30
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7fbc0ca3fc1b
Code: 73 01 c3 48 8b 0d 05 f2 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 29 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 f1 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff18635208 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fbc0ca3fc1b
RDX: 0000000000000006 RSI: 0000000000000001 RDI: 0000000000000002
RBP: 000055d24f80f8a0 R08: 0000000000000003 R09: 0000000000000001
R10: 0000000000020000 R11: 0000000000000246 R12: 000055d24f80f8a0
R13: 0000000000000000 R14: 000055d24f80fb88 R15: 0000000000000000
</TASK>
The current implementation of cipso_v4_sock_setattr() replaces IP options
under the assumption that the caller holds the socket lock; however, such
assumption is not true, nor needed, in selinux_socket_post_create() hook.
Let all callers of cipso_v4_sock_setattr() specify the "socket lock held"
condition, except selinux_socket_post_create() _ where such condition can
safely be set as true even without holding the socket lock.
Fixes:
|
||
|
Linus Torvalds
|
25c73642cc |
Hi
2nd trial of the earlier PR with more appropriate tag:
1. Do no overwrite the key expiration once it is set.
2. Early to quota updates for keys to key_put(), instead of
updating them in key_gc_unused_keys().
[1] Earlier PR:
https://lore.kernel.org/linux-integrity/20240326143838.15076-1-jarkko@kernel.org/
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZjzYqSAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0nQJAQDN4r2K/QgryPyS
fSfVPeeIPkBIOat2sTq8IOQLKlCybwD8Duo6gJuZWmQmdbn2m2Pn/Dg3xUy4ljba
IwHRro/kcwY=
=3V25
-----END PGP SIGNATURE-----
Merge tag 'keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen:
- do not overwrite the key expiration once it is set
- move key quota updates earlier into key_put(), instead of updating
them in key_gc_unused_keys()
* tag 'keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix overwrite of key expiration on instantiation
keys: update key quotas in key_put()
|
||
|
Linus Torvalds
|
b19239143e |
Hi,
These are the changes for the TPM driver with a single major new feature: TPM bus encryption and integrity protection. The key pair on TPM side is generated from so called null random seed per power on of the machine [1]. This supports the TPM encryption of the hard drive by adding layer of protection against bus interposer attacks. Other than the pull request a few minor fixes and documentation for tpm_tis to clarify basics of TPM localities for future patch review discussions (will be extended and refined over times, just a seed). [1] https://lore.kernel.org/linux-integrity/20240429202811.13643-1-James.Bottomley@HansenPartnership.com/ BR, Jarkko -----BEGIN PGP SIGNATURE----- iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZj0l2iAcamFya2tvLnNh a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0m8yAP4hBjMtpgAJZ4eZ 5o9tEQJrh/1JFZJ+8HU5IKPc4RU8BAEAyyYOCtxtS/C5B95iP+LvNla0KWi0pprU HsCLULnV2Aw= =RTXJ -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM updates from Jarkko Sakkinen: "These are the changes for the TPM driver with a single major new feature: TPM bus encryption and integrity protection. The key pair on TPM side is generated from so called null random seed per power on of the machine [1]. This supports the TPM encryption of the hard drive by adding layer of protection against bus interposer attacks. Other than that, a few minor fixes and documentation for tpm_tis to clarify basics of TPM localities for future patch review discussions (will be extended and refined over times, just a seed)" Link: https://lore.kernel.org/linux-integrity/20240429202811.13643-1-James.Bottomley@HansenPartnership.com/ [1] * tag 'tpmdd-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (28 commits) Documentation: tpm: Add TPM security docs toctree entry tpm: disable the TPM if NULL name changes Documentation: add tpm-security.rst tpm: add the null key name as a sysfs export KEYS: trusted: Add session encryption protection to the seal/unseal path tpm: add session encryption protection to tpm2_get_random() tpm: add hmac checks to tpm2_pcr_extend() tpm: Add the rest of the session HMAC API tpm: Add HMAC session name/handle append tpm: Add HMAC session start and end functions tpm: Add TCG mandated Key Derivation Functions (KDFs) tpm: Add NULL primary creation tpm: export the context save and load commands tpm: add buffer function to point to returned parameters crypto: lib - implement library version of AES in CFB mode KEYS: trusted: tpm2: Use struct tpm_buf for sized buffers tpm: Add tpm_buf_read_{u8,u16,u32} tpm: TPM2B formatted buffers tpm: Store the length of the tpm_buf data separately. tpm: Update struct tpm_buf documentation comments ... |
||
Günther Noack
|
b25f7415eb
|
landlock: Add IOCTL access right for character and block devices
Introduces the LANDLOCK_ACCESS_FS_IOCTL_DEV right and increments the Landlock ABI version to 5. This access right applies to device-custom IOCTL commands when they are invoked on block or character device files. Like the truncate right, this right is associated with a file descriptor at the time of open(2), and gets respected even when the file descriptor is used outside of the thread which it was originally opened in. Therefore, a newly enabled Landlock policy does not apply to file descriptors which are already open. If the LANDLOCK_ACCESS_FS_IOCTL_DEV right is handled, only a small number of safe IOCTL commands will be permitted on newly opened device files. These include FIOCLEX, FIONCLEX, FIONBIO and FIOASYNC, as well as other IOCTL commands for regular files which are implemented in fs/ioctl.c. Noteworthy scenarios which require special attention: TTY devices are often passed into a process from the parent process, and so a newly enabled Landlock policy does not retroactively apply to them automatically. In the past, TTY devices have often supported IOCTL commands like TIOCSTI and some TIOCLINUX subcommands, which were letting callers control the TTY input buffer (and simulate keypresses). This should be restricted to CAP_SYS_ADMIN programs on modern kernels though. Known limitations: The LANDLOCK_ACCESS_FS_IOCTL_DEV access right is a coarse-grained control over IOCTL commands. Landlock users may use path-based restrictions in combination with their knowledge about the file system layout to control what IOCTLs can be done. Cc: Paul Moore <paul@paul-moore.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20240419161122.2023765-2-gnoack@google.com Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
Masahiro Yamada
|
b1992c3772 |
kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
||
James Bottomley
|
52ce7d9731 |
KEYS: trusted: Add session encryption protection to the seal/unseal path
If some entity is snooping the TPM bus, the can see the data going in to be sealed and the data coming out as it is unsealed. Add parameter and response encryption to these cases to ensure that no secrets are leaked even if the bus is snooped. As part of doing this conversion it was discovered that policy sessions can't work with HMAC protected authority because of missing pieces (the tpm Nonce). I've added code to work the same way as before, which will result in potential authority exposure (while still adding security for the command and the returned blob), and a fixme to redo the API to get rid of this security hole. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Jarkko Sakkinen
|
40813f1879 |
KEYS: trusted: tpm2: Use struct tpm_buf for sized buffers
Take advantage of the new sized buffer (TPM2B) mode of struct tpm_buf in tpm2_seal_trusted(). This allows to add robustness to the command construction without requiring to calculate buffer sizes manually. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Jarkko Sakkinen
|
e1b72e1b11 |
tpm: Store the length of the tpm_buf data separately.
TPM2B buffers, or sized buffers, have a two byte header, which contains the length of the payload as a 16-bit big-endian number, without counting in the space taken by the header. This differs from encoding in the TPM header where the length includes also the bytes taken by the header. Unbound the length of a tpm_buf from the value stored to the TPM command header. A separate encoding and decoding step so that different buffer types can be supported, with variant header format and length encoding. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Jarkko Sakkinen
|
4f0feb5463 |
tpm: Remove tpm_send()
Open code the last remaining call site for tpm_send(). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
David Gstir
|
28c5f596ae |
docs: trusted-encrypted: add DCP as new trust source
Update the documentation for trusted and encrypted KEYS with DCP as new trust source: - Describe security properties of DCP trust source - Describe key usage - Document blob format Co-developed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at> Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Gstir <david@sigma-star.at> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
David Gstir
|
2e8a0f40a3 |
KEYS: trusted: Introduce NXP DCP-backed trusted keys
DCP (Data Co-Processor) is the little brother of NXP's CAAM IP.
Beside of accelerated crypto operations, it also offers support for
hardware-bound keys. Using this feature it is possible to implement a blob
mechanism similar to what CAAM offers. Unlike on CAAM, constructing and
parsing the blob has to happen in software (i.e. the kernel).
The software-based blob format used by DCP trusted keys encrypts
the payload using AES-128-GCM with a freshly generated random key and nonce.
The random key itself is AES-128-ECB encrypted using the DCP unique
or OTP key.
The DCP trusted key blob format is:
/*
* struct dcp_blob_fmt - DCP BLOB format.
*
* @fmt_version: Format version, currently being %1
* @blob_key: Random AES 128 key which is used to encrypt @payload,
* @blob_key itself is encrypted with OTP or UNIQUE device key in
* AES-128-ECB mode by DCP.
* @nonce: Random nonce used for @payload encryption.
* @payload_len: Length of the plain text @payload.
* @payload: The payload itself, encrypted using AES-128-GCM and @blob_key,
* GCM auth tag of size AES_BLOCK_SIZE is attached at the end of it.
*
* The total size of a DCP BLOB is sizeof(struct dcp_blob_fmt) + @payload_len +
* AES_BLOCK_SIZE.
*/
struct dcp_blob_fmt {
__u8 fmt_version;
__u8 blob_key[AES_KEYSIZE_128];
__u8 nonce[AES_KEYSIZE_128];
__le32 payload_len;
__u8 payload[];
} __packed;
By default the unique key is used. It is also possible to use the
OTP key. While the unique key should be unique it is not documented how
this key is derived. Therefore selection the OTP key is supported as
well via the use_otp_key module parameter.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
David Gstir
|
633cb72fb6 |
KEYS: trusted: improve scalability of trust source config
Enabling trusted keys requires at least one trust source implementation (currently TPM, TEE or CAAM) to be enabled. Currently, this is done by checking each trust source's config option individually. This does not scale when more trust sources like the one for DCP are added, because the condition will get long and hard to read. Add config HAVE_TRUSTED_KEYS which is set to true by each trust source once its enabled and adapt the check for having at least one active trust source to use this option. Whenever a new trust source is added, it now needs to select HAVE_TRUSTED_KEYS. Signed-off-by: David Gstir <david@sigma-star.at> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> # for TRUSTED_KEYS_TPM Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Silvio Gissi
|
9da27fb65a |
keys: Fix overwrite of key expiration on instantiation
The expiry time of a key is unconditionally overwritten during
instantiation, defaulting to turn it permanent. This causes a problem
for DNS resolution as the expiration set by user-space is overwritten to
TIME64_MAX, disabling further DNS updates. Fix this by restoring the
condition that key_set_expiry is only called when the pre-parser sets a
specific expiry.
Fixes:
|
||
Luis Henriques
|
9578e327b2 |
keys: update key quotas in key_put()
Delaying key quotas update when key's refcount reaches 0 in key_put() has
been causing some issues in fscrypt testing, specifically in fstest
generic/581. This commit fixes this test flakiness by dealing with the
quotas immediately, and leaving all the other clean-ups to the key garbage
collector.
This is done by moving the updates to the qnkeys and qnbytes fields in
struct key_user from key_gc_unused_keys() into key_put(). Unfortunately,
this also means that we need to switch to the irq-version of the spinlock
that protects these fields and use spin_lock_{irqsave,irqrestore} in all
the code that touches these fields.
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
|
||
|
Christian Göttsche
|
581646c3fb |
selinux: constify source policy in cond_policydb_dup()
cond_policydb_dup() duplicates conditional parts of an existing policy. Declare the source policy const, since it should not be modified. Signed-off-by: Christian Göttsche <cgzones@googlemail.com> [PM: various line length fixups] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Christian Göttsche
|
851541709a |
selinux: avoid printk_ratelimit()
The usage of printk_ratelimit() is discouraged, see
include/linux/printk.h, thus use pr_warn_ratelimited().
While editing this line address the following checkpatch warning:
WARNING: Integer promotion: Using 'h' in '%hu' is unnecessary
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Christian Göttsche
|
fc983171e4 |
selinux: pre-allocate the status page
Since the status page is currently only allocated on first use, the sequence number of the initial policyload (i.e. 1) is not stored, leading to the observable sequence of 0, 2, 3, 4, ... Try to pre-allocate the status page during the initialization of the selinuxfs, so selinux_status_update_policyload() will set the sequence number. This brings the status page to return the actual sequence number for the initial policy load, which is also observable via the netlink socket. I could not find any occurrence where userspace depends on the actual value returned by selinux_status_policyload(3), thus the breakage should be unnoticed. Closes: https://lore.kernel.org/selinux/87o7fmua12.fsf@redhat.com/ Signed-off-by: Christian Göttsche <cgzones@googlemail.com> [PM: trimmed 'reported-by' that was missing an email] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
York Jasper Niebuhr
|
ba42b524a0 |
mm: init_mlocked_on_free_v3
Implements the "init_mlocked_on_free" boot option. When this boot option
is enabled, any mlock'ed pages are zeroed on free. If
the pages are munlock'ed beforehand, no initialization takes place.
This boot option is meant to combat the performance hit of
"init_on_free" as reported in commit
|
||
Joel Granados
|
74560bb368 |
lsm: remove the now superfluous sentinel element from ctl_table array
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove the sentinel from all files under security/ that register a sysctl table. Signed-off-by: Joel Granados <j.granados@samsung.com> Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Tested-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> [PM: subject line tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
Enrico Bravi
|
9fa8e76250 |
ima: add crypto agility support for template-hash algorithm
The template hash showed by the ascii_runtime_measurements and
binary_runtime_measurements is the one calculated using sha1 and there is
no possibility to change this value, despite the fact that the template
hash is calculated using the hash algorithms corresponding to all the PCR
banks configured in the TPM.
Add the support to retrieve the ima log with the template data hash
calculated with a specific hash algorithm.
Add a new file in the securityfs ima directory for each hash algo
configured in a PCR bank of the TPM. Each new file has the name with
the following structure:
{binary, ascii}_runtime_measurements_<hash_algo_name>
Legacy files are kept, to avoid breaking existing applications, but as
symbolic links which point to {binary, ascii}_runtime_measurements_sha1
files. These two files are created even if a TPM chip is not detected or
the sha1 bank is not configured in the TPM.
As example, in the case a TPM chip is present and sha256 is the only
configured PCR bank, the listing of the securityfs ima directory is the
following:
lr--r--r-- [...] ascii_runtime_measurements -> ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha1
-r--r----- [...] ascii_runtime_measurements_sha256
lr--r--r-- [...] binary_runtime_measurements -> binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha1
-r--r----- [...] binary_runtime_measurements_sha256
--w------- [...] policy
-r--r----- [...] runtime_measurements_count
-r--r----- [...] violations
Signed-off-by: Enrico Bravi <enrico.bravi@polito.it>
Signed-off-by: Silvia Sisinni <silvia.sisinni@polito.it>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
||
Stefan Berger
|
5e2e4d0ea5 |
evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
Rename is_unsupported_fs to is_unsupported_hmac_fs since now only HMAC is unsupported. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
1f65e57dc5 |
fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
Now that EVM supports RSA signatures for previously completely unsupported filesystems rename the flag SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED to reflect that only HMAC is not supported. Suggested-by: Amir Goldstein <amir73il@gmail.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
47add87ad1 |
evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
Unsupported filesystems currently do not enforce any signatures. Add support for signature enforcement of the "original" and "portable & immutable" signatures when EVM_INIT_X509 is enabled. The "original" signature type contains filesystem specific metadata. Thus it cannot be copied up and verified. However with EVM_INIT_X509 and EVM_ALLOW_METADATA_WRITES enabled, the "original" file signature may be written. When EVM_ALLOW_METADATA_WRITES is not set or once it is removed from /sys/kernel/security/evm by setting EVM_INIT_HMAC for example, it is not possible to write or remove xattrs on the overlay filesystem. This change still prevents EVM from writing HMAC signatures on unsupported filesystem when EVM_INIT_HMAC is enabled. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
cd9b909a11 |
ima: re-evaluate file integrity on file metadata change
Force a file's integrity to be re-evaluated on file metadata change by resetting both the IMA and EVM status flags. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
a652aa5906 |
evm: Store and detect metadata inode attributes changes
On stacked filesystem the metadata inode may be different than the one file data inode and therefore changes to it need to be detected independently. Therefore, store the i_version, device number, and inode number associated with the file metadata inode. Implement a function to detect changes to the inode and if a change is detected reset the evm_status. This function will be called by IMA when IMA detects that the metadata inode is different from the file's inode. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
309e2b775d |
ima: Move file-change detection variables into new structure
Move all the variables used for file change detection into a structure that can be used by IMA and EVM. Implement an inline function for storing the identification of an inode and one for detecting changes to an inode based on this new structure. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
faf994811e |
evm: Use the metadata inode to calculate metadata hash
Changes to file attributes (mode bits, uid, gid) on the lower layer are not taken into account when d_backing_inode() is used when a file is accessed on the overlay layer and this file has not yet been copied up. This is because d_backing_inode() does not return the real inode of the lower layer but instead returns the backing inode which in this case holds wrong file attributes. Further, when CONFIG_OVERLAY_FS_METACOPY is enabled and a copy-up is triggered due to file metadata changes, then the metadata are held by the backing inode while the data are still held by the real inode. Therefore, use d_inode(d_real(dentry, D_REAL_METADATA)) to get to the file's metadata inode and use it to calculate the metadata hash with. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
f2b3fc42f6 |
evm: Implement per signature type decision in security_inode_copy_up_xattr
To support "portable and immutable signatures" on otherwise unsupported filesystems, determine the EVM signature type by the content of a file's xattr. If the file has the appropriate signature type then allow it to be copied up. All other signature types are discarded as before. "Portable and immutable" EVM signatures can be copied up by stacked file- system since the metadata their signature covers does not include file- system-specific data such as a file's inode number, generation, and UUID. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
3253804773 |
security: allow finer granularity in permitting copy-up of security xattrs
Copying up xattrs is solely based on the security xattr name. For finer granularity add a dentry parameter to the security_inode_copy_up_xattr hook definition, allowing decisions to be based on the xattr content as well. Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> (LSM,SELinux) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
|
Stefan Berger
|
c21632b668 |
ima: Rename backing_inode to real_inode
Rename the backing_inode variable to real_inode since it gets its value from real_inode(). Suggested-by: Amir Goldstein <amir73il@gmail.com> Co-developed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
Gustavo A. R. Silva
|
38aa3f5ac6 |
integrity: Avoid -Wflex-array-member-not-at-end warnings
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
There is currently an object (`hdr)` in `struct ima_max_digest_data`
that contains a flexible structure (`struct ima_digest_data`):
struct ima_max_digest_data {
struct ima_digest_data hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
So, in order to avoid ending up with a flexible-array member in the
middle of a struct, we use the `__struct_group()` helper to separate
the flexible array from the rest of the members in the flexible
structure:
struct ima_digest_data {
__struct_group(ima_digest_data_hdr, hdr, __packed,
... the rest of the members
);
u8 digest[];
} __packed;
And similarly for `struct evm_ima_xattr_data`.
With the change described above, we can now declare an object of the
type of the tagged `struct ima_digest_data_hdr`, without embedding the
flexible array in the middle of another struct:
struct ima_max_digest_data {
struct ima_digest_data_hdr hdr;
u8 digest[HASH_MAX_DIGESTSIZE];
} __packed;
And similarly for `struct evm_digest` and `struct evm_xattr`.
We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure.
So, with these changes, fix the following warnings:
security/integrity/evm/evm.h:64:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/evm/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/ima/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:40:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
security/integrity/platform_certs/../integrity.h:68:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|