This adds a list that is used to collect the templates that are active on a
port.
This allows the template creation to change the port configuration
and the template destruction to change it back.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides these 3 functions in the VCAP API:
- Count the number of rules in a VCAP lookup (chain)
- Remove a key from a VCAP rule
- Find the keyset that gives the smallest rule list from a list of keysets
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the name used in the debugfs output.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix deletion of existing DSCP mappings in the APP table.
Adding and deleting DSCP entries are replicated per-port, since the
mapping table is global for all ports in the chip. Whenever a mapping
for a DSCP value already exists, the old mapping is deleted first.
However, it is only deleted for the specified port. Fix this by calling
sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be.
Reproduce:
// Map and remap DSCP value 63
$ dcb app add dev eth0 dscp-prio 63:1
$ dcb app add dev eth0 dscp-prio 63:2
$ dcb app show dev eth0 dscp-prio
dscp-prio 63:2
$ dcb app show dev eth1 dscp-prio
dscp-prio 63:1 63:2 <-- 63:1 should not be there
Fixes: 8dcf69a641 ("net: microchip: sparx5: add support for offloading dscp table")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.
Fixes: 4a3581cd59 ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The line endings must be preserved on gpio-controller, io-supply, and
reset-gpios properties to look proper when the YAML file is parsed.
Currently it's interpreted as a single line when parsed. Change the style
of the description of these properties to literal style to preserve the
line endings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes: ee9dfbef02 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Transform zero-length array into flexible-array member in struct
mlx4_en_rx_desc.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:88:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:149:30: warning: array subscript 0 is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:127:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:128:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:129:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:117:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
drivers/net/ethernet/mellanox/mlx4/en_rx.c:119:30: warning: array subscript i is outside array bounds of ‘struct mlx4_wqe_data_seg[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/264
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
r8169: disable ASPM during NAPI poll
This is a rework of ideas from Kai-Heng on how to avoid the known
ASPM issues whilst still allowing for a maximum of ASPM-related power
savings. As a prerequisite some locking is added first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ASPM is disabled during NAPI poll, we can remove all ASPM
restrictions. This allows for higher power savings if the network
isn't fully loaded.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bail out if the function is used with chip versions that don't support
ASPM configuration. In addition remove the delay, it tuned out that
it's not needed, also vendor driver r8125 doesn't have it.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to unlock access
to the config registers in atomic context. Other code parts
running with config register access unlocked are partially
longer and can sleep. Add a usage counter to enable parallel
execution of code parts requiring unlocked config registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access both registers
in atomic context. Use a spinlock to protect access.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access mac ocp
registers in atomic context. This could result in races because
a mac ocp read consists of a write to register OCPDR, followed
by a read from the same register. Therefore add a spinlock to
protect access to mac ocp registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Transform zero-length array into flexible-array member in struct
nx_cardrsp_rx_ctx_t.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/265
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lan95xx_config_aneg_ext() can be simplified by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/3da785c7-3ef8-b5d3-89a0-340f550be3c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enum skb_drop_reason is more generic, we can adopt it instead.
Provide dev_kfree_skb_irq_reason() and dev_kfree_skb_any_reason().
This means drivers can use more precise drop reasons if they want to.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20230306204313.10492-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cond sometimes is (val & MASK) what may result in a false positive
if val is a negative errno. We shouldn't evaluate cond if val < 0.
This has no functional impact here, but it's not nice.
Therefore switch order of the checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6d8274ac-4344-23b4-d9a3-cad4c39517d4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Puranjay Mohan says:
====================
This series add the support of the ARM architecture to libbpf USDT. This
involves implementing the parse_usdt_arg() function for ARM.
It was seen that the last part of parse_usdt_arg() is repeated for all architectures,
so, the first patch in this series refactors these functions and moved the post
processing to parse_usdt_spec()
Changes in V2[1] to V3:
- Use a tabular approach to find register offsets.
- Add the patch for refactoring parse_usdt_arg()
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Parsing of USDT arguments is architecture-specific; on arm it is
relatively easy since registers used are r[0-10], fp, ip, sp, lr,
pc. Format is slightly different compared to aarch64; forms are
- "size @ [ reg, #offset ]" for dereferences, for example
"-8 @ [ sp, #76 ]" ; " -4 @ [ sp ]"
- "size @ reg" for register values; for example
"-4@r0"
- "size @ #value" for raw values; for example
"-8@#1"
Add support for parsing USDT arguments for ARM architecture.
To test the above changes QEMU's virt[1] board with cortex-a15
CPU was used. libbpf-bootstrap's usdt example[2] was modified to attach
to a test program with DTRACE_PROBE1/2/3/4... probes to test different
combinations.
[1] https://www.qemu.org/docs/master/system/arm/virt.html
[2] https://github.com/libbpf/libbpf-bootstrap/blob/master/examples/c/usdt.bpf.c
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307120440.25941-3-puranjay12@gmail.com
The parse_usdt_arg() function is defined differently for each
architecture but the last part of the function is repeated
verbatim for each architecture.
Refactor parse_usdt_arg() to fill the arg_sz and then do the repeated
post-processing in parse_usdt_spec().
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307120440.25941-2-puranjay12@gmail.com
Coverity reported a potential underflow of the offset variable used in
the find_cd() function. Switch to using a signed 64 bit integer for the
representation of offset to make sure we can never underflow.
Fixes: 1eebcb6063 ("libbpf: Implement basic zip archive parsing support")
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230307215504.837321-1-deso@posteo.net
i225/i226 parts used only one media type copper. The copper media type is
not replaceable. Clean up the code accordingly, and remove the obsolete
media replacement and reset options.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for configuring the max SDU for each Tx queue.
If not specified, keep the default.
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add ConfigChangeError(qbv_config_change_errors) when user try to set the
AdminBaseTime to past value while the current GCL is still running.
The ConfigChangeError counter should not be increased when a gate control
list is scheduled into the future.
User can use "ethtool -S <interface> | grep qbv_config_change_errors"
command to check the counter values.
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
I was intending to make all the Netlink Spec code BSD-3-Clause
to ease the adoption but it appears that:
- I fumbled the uAPI and used "GPL WITH uAPI note" there
- it gives people pause as they expect GPL in the kernel
As suggested by Chuck re-license under dual. This gives us benefit
of full BSD freedom while fulfilling the broad "kernel is under GPL"
expectations.
Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/
Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cb_context should be freed on the error path in nfc_se_io as stated by
commit 25ff6f8a5a ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").
Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In monitor mode, we try to report the EOF bit on the
first MPDU of an A-MPDU (hardware duplicates this bit
over all MPDUs, so it's only trustable on the first).
However, due to reshuffling in an ealier commit, the
toggle_bit != mvm->ampdu_toggle logic can no longer
work since mvm->ampdu_toggle is now set before this
code runs.
Fix this by tracking the first_subframe status in the
phy data struct and using that instead of checking.
Fixes: f1490546be ("wifi: iwlwifi: mvm: rxmq: refactor mac80211 rx_status setting")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.e273aa0d3fdc.I77db4cc247898eae8a98b80659386d6737052b95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:
In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
106 | ___constant_swab16(x) : \
| ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
| ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
96 | #define cpu_to_be16 __cpu_to_be16
| ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
1458 | cpu_to_be16((match.key->vlan_priority <<
| ^~~~~~~~~~~
After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.
Fixes: 34800178b3 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There were few smatch warnings reported by Dan:
- ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner
- return values in ice_vsi_cfg_def were ignored
- in ice_vsi_rebuild return value was ignored in case rebuild failed,
it was a never reached code, however, rewrite it for clarity.
- ice_vsi_cfg_tc can return 0 instead of ret
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC. This means that traffic classes
4-7 could not be enabled for PFC.
Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.
Fixes: 2a87bd73e5 ("ice: Add DSCP support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 596ff4a09b ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.
However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.
Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place. Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5fa3
"cpumask: fix incorrect cpumask scanning result checks").
But let's just do it right, the way the code was _intended_ to work. We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.
It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word. And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:
- the cpumask case wants to do the _optimization_ based on "NR_CPUS is
a small constant", but then wants to do the actual bit _fill_ based
on "nr_cpu_ids" that isn't necessarily that same constant
- we have lots of non-cpumask users of bitmap_fill(), and while they
hopefully don't care, and probably would want the proper semantics
anyway ("only set bits up to the limit"), I do not want the cpumask
changes to impact other parts
So this ends up just doing the single-word optimization by hand in the
cpumask code. If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly. And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.
This is all an example of how our bitmap function optimizations really
are somewhat broken. They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.
In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").
Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.
And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).
So this cpumask_setall() implementation just makes that explicit. It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')
Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.
While we dream of that perfect world, this does that manual logic to
make it all work out. And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not include user information in radtiotap EHT data for EHT sounding
NDP as the frame doesn't include the user specific field. Instead,
encode the NSS and the beamforming information in the EHT data.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.ac6474ded9bd.I9655589e9afbacc16820f35f6f5d90c6a91b8b05@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
VHT, HE and EHT rates use the same bits for NSS, so no need for
defines per PHY version.
Also use spatch to replace bit manipulation with FIELD_GET:
@@
identifier rate;
@@
-((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS)
+FIELD_GET(RATE_MCS_NSS_MSK, rate)
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the for loop runs also over unsupported bandwidth in the
command, shorten the path in case we don't support it.
Also use the right macro for setting BW20.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.0264ba9df63b.I6c7c9efc806e0ffb7cb3b6051b2d109646e8708c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For the old TX API we need the tfd_queue_msk, but for the
new TX API we don't need it here because we add it to the
station later. However, for the new API mvm->snif_queue is
set to IWL_MVM_INVALID_QUEUE == 0xffff, so the BIT() here
is undefined behaviour.
Since we don't need the tfd_queue_msk value for the new TX
API at all, simply fill it in only for the old API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.b8da0b7eb194.I53744fd7cfb6e146a9393272a2a61852841238d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Calculate the position of the control channel in the wide channel
based on the chandef, this is used to obtain the value of N in
802.11be D1.5 Table 9-53a in the column PHY MU/MRU index.
To avoid the need to calculate every frame the value, do it once
monitor vif is added.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.fe9a5b58e241.I291ee480252d098f62d9ec39040284d3e521d88e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In EHT sniffer mode DW4 is all used for sniffer data (unlike we have in
HE mode), so move the full DW4 into a union, and we extract the new data5
used for parsing USIG info and set all to radiotap TLVs with the
extracted data.
Also parse OFDM_RX_VECTOR_USIG_A1_OUT and OFDM_RX_VECTOR_USIG_A2_OUT for
rx_no_data notification.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.557d3870753b.I4e9fa4d21900a187753529d46956ba2a7ee75fda@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
