The values in this enum are not used by h/w but are a contract
between userspace and the kernel driver so they must be defined
in the uapi file.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Set a default value for memory scrubbing
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In future ASICs, it would be possible to have a non-idle
device when context is released. We thus need to postpone the
scrubbing. Postpone it to hpriv release if reset is not executed
or to device late init if reset is executed.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the callback scrub_device_mem, use 'memory_scrub_val'
from debugfs for the scrubbing value.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We use scrub_device_mem only to scrub the entire SRAM and entire
DRAM. Therefore there is no need to send addr and size
args to the callback.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is no need to do memory scrub when unmapping anymore as it is
an overhead as long as we have a single user at any given time.
Remove that code and change return value of free_phys_pg_pack to void
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For easier debug, it is desirable to have a simple way
to know whether the device is secured or not, hence we dump this
indication during boot.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a rare race condition in CB completion mechanism, that can
occur under a very high pressure of command submissions.
The preconditions for this to happen are:
1. There should be enough command submissions for the pre-allocated
patched CB pool to run out of commands. At this stage we start
allocating new patched CBs as they arrive.
2. CB size has to be exactly (128*n + 104)B for some n, i.e. 24B below
a cache line end.
The flow:
1. Two command buffers being completed on different streams, at the
same time. Denote those CB1 and CB2.
2. Each command buffer is injected with two messages, 16B each - one
for a HBW update of the completion queue, another to raise
interrupt.
3. Assume CB1 updated the completion queue and raise the interrupt.
4. Assume CB2 updated the completion queue but did not raise the
interrupt yet.
5. The host receives the interrupt. It goes over the completion queue
and sees two completions - CB1 and CB2. Release them both.
6. CB2 performs the last command. The problem is that the last command
is split between 2 cache lines. So to read the last 8B of the last
command, it has to access the host again. Problem is - CB2 is
already released. This causes a DMAR error.
The solution to this problem is simply to make sure the last two
commands in the CB are always in the same cache line, using NOP padding.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
move the field memory_scrub_val from struct hl_dbg_device_entry
to struct hl_device. This is because we want to use
this field also if debugfs is off.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multiple SRAM SERR events are treated as critical events,
and host should be notified about it. Thus, adding is_critical
indication as part of SRAM ECC failure packet.
Signed-off-by: ran shalit <rshalit@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When a device error occurs, user process would like to get some
indication on the error by reading some device HW info. If the
device is unavailable, user process can't perform any HW device
reading.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This asic callback function is not called anymore from the common code.
The asic-specific function itself is called but from within the
asic-specific code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When validating NIC queues, queue offset calculation must be
performed only for NIC queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver performs no validity check for the user cq counter offset
used in both wait_for_interrupt and register_for_timestamp APIs.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW raised an event following a MME2 QMAN error, the driver should
have gone to the corresponding status registers, trying to gather more
info on the error, yet it was accidentally accessing MME1 QMAN address
space.
Generally, we have x4 MMEs, while 0 & 2 are marked MASTER, and
1 & 3 are marked SLAVE. The former can be addressed, yet addressing
the latter is considered an access violation, and will result in a
hung system, which is what unintentionally happened above.
Note that this cannot happen in a secured system, since these registers
are protected with range registers.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When sending a packet to FW right after it made reset, we will get
packet timeout. Since it is expected behavior, we don't need to
print an error in such case.
Hence, when driver is in hard reset it will avoid from printing error
messages about packet timeout.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The Driver needs to inform the User process whenever one of its
CS is timed out. The Driver shall recognize the CS timeout and shall
send an eventfd notification, towards user space, whenever a timeout
is expired on a CS.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Device reset event, indicates that the device shall be reset -
after a short delay. In such case, the driver sends a notification
towards the User process. This allows the User process
to be able to take several debug actions for system
diagnostic purposes.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to prepare the driver code for device reset event
notification, change the event handler function flow to call
device reset from one code block.
In addition, the commit fixes an issue that reset was performed
w/o checking the 'hard_reset_on_fw_event' state and w/o setting
the HL_DRV_RESET_DELAY flag.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The info ioctl retrieves information on the last undefined opcode
occurred.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
when an undefined opcode error occurres, the driver collects
the relevant information from the Qman and stores it inside
the hdev data structure. An event fd indication is sent towards the
user space.
Note: another commit shall be followed which will add support to
read the error info by an ioctl.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_get_compute_ctx() is used to get the pointer to the compute context
from the hpriv object.
The function is called in code paths that are not necessarily initiated
by user, so it is possible that a context release process will happen in
parallel.
This can lead to a race condition in which hl_get_compute_ctx()
retrieves the context pointer, and just before it increments the context
refcount, the context object is released and a freed memory is accessed.
To avoid this race, add a mutex to protect the context pointer in hpriv.
With this lock, hl_get_compute_ctx() will be able to detect if the
context has been released or is about to be released.
struct hl_ctx_mgr has a mutex for contexts IDR with a similar "ctx_lock"
name, so rename it to just "lock" to avoid a confusion with the new
lock.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Often, the user is not interested in the completion timestamp of all
command submissions.
A common situation is, for example, when the user submits a burst of,
possibly, several thousands of commands, then request the completion
timestamp of only couple of specific key commands from all the burst.
The problem is that currently, the outcome of the early commands may be
lost, due to a large amount of later commands, that the user does not
really care about.
This patch creates a separate store with the outcomes of commands the
user has mark explicitly as interested in. This store does not mix the
marked commands with the unmarked ones, hence the data there will
survive for much longer.
Signed-off-by: Yuri Nudelman <ynudelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to code changes in the past few years, the original comment of
how parser->user_cb_size is checked was not correct anymore.
Fix it to reflect current code and add more explanation as the code
is more complex now.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
positive flags naming will make more clear code while adding
more 'error info' structures
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
raising the tpc assert event in an internal function will make
the code cleaner as we are going to be adding more events
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Arrays of struct attribute are expected to be NULL terminated.
This is required by API methods such as device_add_groups.
This fixes a crash when loading the driver for Goya device.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If hl_mmu_prefetch_cache_range() fails then this code calls
mutex_unlock(&ctx->mmu_lock) when it's no longer holding the mutex.
Fixes: 9e495e2400 ("habanalabs: do MMU prefetch as deferred work")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
see warnings:
| drivers/misc/eeprom/idt_89hpesx.c:570:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:579:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:814:4: error: format specifies type
| 'unsigned short' but the argument has type 'unsigned int'
| [-Werror,-Wformat] CSR_REAL_ADDR(csraddr));
There's an ongoing movement to eventually enable the -Wformat flag for
clang. See: https://github.com/ClangBuiltLinux/linux/issues/378
The format specifier for idt_89hpesx.c:570 and 579 was `0x%02hhx`. The
part we care about `%hhx` describes a single byte format, wherein the
leftmost byte of our u16 type (of which memaddr is) is truncated.
example:
```
uint16_t x = 0xbabe;
printf("%hhx\n", x);
// output is: be
// we lost 'ba'
```
There exists a similar issue at idt_89hpesx.c:814 which involves the
CSR_REAL_ADDR macro. This macro returns a u16 but due to default
argument promotion for variadic functions (printf-like) actually
provides an int to the dev_err method.
My proposed solution is to expand the width of the format specifier to
fully encompass the provided argument (which is promoted to an int, see
below). I opted for '%x' as this specifies an unsigned hexadecimal
integer which, with a guarantee, can represent all the values of a u16.
As per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20220701232031.2639134-1-justinstitt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless cast in a bitmap_empty() call.
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ef49726d60f6a531428609f60a2398b6c3d9a26e.1656966181.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set return value in rsp_buf alloc error path before going to
error handling.
drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ucr->rsp_buf)
^~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here
return ret;
^~~
drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false
if (!ucr->rsp_buf)
^~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Fixes: 3776c78559 ("misc: rtsx_usb: use separate command and response buffers")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uacce driver must deal with a possible removal of the parent device
or parent driver module rmmod at any time.
Although uacce_remove(), called on device removal and on driver unbind,
prevents future use of the uacce fops by removing the cdev, fops that
were called before that point may still be running.
Serialize uacce_fops_open() and uacce_remove() with uacce->mutex.
Serialize other fops against uacce_remove() with q->mutex.
Since we need to protect uacce_fops_poll() which gets called on the fast
path, replace uacce->queues_lock with q->mutex to improve scalability.
The other fops are only used during setup.
uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes
whether uacce_remove() has disabled all queues. If that is the case,
don't go any further since the parent device is being removed and
uacce->ops should not be called anymore.
Reported-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_usb uses same buffer for command and response. There could
be a potential conflict using the same buffer for both especially
if retries and timeouts are involved.
Use separate command and response buffers to avoid conflicts.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/07e3721804ff07aaab9ef5b39a5691d0718b9ade.1656642167.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent change to split reads into chunks has several problems:
1. If an SPI controller has no transfer size limit, max_chunk is
SIZE_MAX, and num_msgs becomes zero, causing no data to be read
into the buffer, and exposing the original contents of the buffer
to userspace,
2. If the requested read size is not a multiple of the maximum
transfer size, the last transfer reads too much data, overflowing
the buffer,
3. The loop logic differs from the write case.
Fix the above by:
1. Keeping track of the number of bytes that are still to be
transferred, instead of precalculating the number of messages and
keeping track of the number of bytes tranfered,
2. Calculating the transfer size of each individual message, taking
into account the number of bytes left,
3. Switching from a "while"-loop to a "do-while"-loop, and renaming
"msg_count" to "segment".
While at it, drop the superfluous cast from "unsigned int" to "unsigned
int", also from at25_ee_write(), where it was probably copied from.
Fixes: 0a35780c75 ("eeprom: at25: Split reads into chunks and cap write size")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs after a successful idr_alloc() call, the corresponding
resource must be released with idr_remove() as already done in the .remove
function.
Update the error handling path to add the missing idr_remove() call.
Fixes: ada8a8a13b ("mfd: Add realtek pcie card reader driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e8dc41716cbf52fb37a12e70d8972848e69df6d6.1655271216.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a pointer being initialized with a zero, use NULL instead.
Cleans up sparse warning:
drivers/misc/lkdtm/cfi.c💯27: warning: Using plain integer as NULL pointer
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220612202708.2754270-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/misc/cxl/cxl.h
line: 1107
+/* check if the given pci_dev is on the the cxl vphb bus */
changed to
+/* check if the given pci_dev is on the cxl vphb bus */
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621125321.122280-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/misc/sgi-xp/xpc_uv.c
line: 1601
* to put the the msg_slot back on the free list.
changed to
* to put the msg_slot back on the free list.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621124840.119875-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
