The new HDP flush method doesn't seem to work reliably on
sDMA either, so use the old method here too.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To plug the VRAM memory leak (see previous patch for
details) we must unpin the frame buffer when disabling the
CRTC. This warrants the addition of disable function for legacy
CRTC, which puts the CRTC in DPMS-OFF state and unpins the
frame buffer if there is one associated with the CRTC.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When drm_helper_disable_unused_functions calls disable
function of the CRTC, it also sets the crtc->fb pointer
to NULL. This can later (when the mode on that CRTC is setup
again from user space) cause ***_do_set_base functions to
"think" that there is no old buffer and skip the unpinning
code. Consequently, the buffer that has been NULL-ified in
drm_helper_disable_unused_functions will never be unpinned
causing a leak in VRAM.
This patch plugs the leak by unpinning the frame buffer
in crtc_disable function.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current code writing SADs to the audio registers seems to assume
that there is at most a single SAD per audio format.
However, that is not the case. Especially for PCM it is somewhat common
for sinks to have two SADs, one for 8-channel and one for 2-channel
audio, which may have different supported sample rates (i.e. the sink
supports stereo audio at higher sample rates than multichannel audio).
Because of this, only the 2-channel SAD may be used if it appears before
the 8-channel SAD. Unless other SADs require otherwise, this may cause
the ALSA HDA driver to allow stereo playback only.
Fix the code to pick the PCM SAD with the highest number of channels,
while merging the rate masks of PCM SADs with lower amount of channels
into the additional stereo rate mask byte.
Technically there are even more cases to handle (multiple non-PCM SADs
of the same type, more than two PCM SADs with varying channel counts,
etc), but those have not actually been encountered in the field and
handling them would be non-trivial.
Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo
support and 96kHz 8-channel support (and other 8-channel compressed
formats):
00ffffffffffff003dcb010000000001
ffff0103800000780a0dc9a057479827
12484c00000001010101010101010101
010101010101011d8018711c1620582c
2500c48e2100009e011d007251d01e20
6e285500c48e2100001e000000fc0054
582d53523637342020202020000000fd
00313d0f2e08000a202020202020019b
02032f724f8504030f0e07069413121e
1d1615012f097f070f1f071707503707
503f07c0834f000066030c00ffff808c
0ad08a20e02d10103e9600c48e210000
18011d80d0721c1620102c2580c48e21
00009e011d00bc52d01e20b8285540c4
8e2100001e8c0ad090204031200c4055
00c48e210000180000000000000000a8
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Andre Heider <a.heider@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
on gm45/vlv. Since this is a testing-only feature it should ever hurt,
but I figured it'll help with regression-testing -fixes. So I left it
in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
conflict with the bdw stage 1 patches if I'd postpone this to -next.
It's only an relatively small interface rework, so shouldn't cause pain.
It's also been in my tree since almost 3 weeks already.
That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over
Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.
There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.
* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
drm/i915/vlv: use per-pipe backlight controls v2
drm/i915: make backlight functions take a connector
drm/i915: move opregion asle request handling to a work queue
drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
drm/i915: Make intel_dp_is_edp() less specific
drm/i915: Give names to the VBT child device type bits
drm/i915/vlv: enable HDA display audio for Valleyview2
drm/i915/dvo: call ->mode_set callback only when the port is running
drm/i915: avoid unclaimed registers when capturing the error state
drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
drm/i915: scramble reset support for DP port CRC on vlv
drm/i915: scramble reset support for DP port CRC on g4x
drm/i916: add "auto" pipe CRC source
...
Conflicts:
MAINTAINERS
drivers/gpu/drm/i915/intel_panel.c
drivers/gpu/drm/nouveau/core/subdev/mc/base.c
drivers/gpu/drm/radeon/atombios_encoders.c
drivers/gpu/drm/radeon/radeon_connectors.c
The present code assumes that optimus is present whenever two
VGA (PCI_CLASS_DISPLAY_VGA) devices are present. This does not
seem to be the case of newer laptops with optimus, in which
case the nvidia gpu is a PCI_CLASS_DISPLAY_3D device.
Rework the logic so that we count both VGA and 3D devices,
when contemplating if optimus is present on the platform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70208
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Ilia's PMPEG improvements
- MSI fixes, and another attempt at enabling by default
- Initial GK208 support, just modesetting
- "Old" PM code gone, new infrastructure and various different stages of support (depending which chipset / ram type etc) is in its place. This includes support that goes beyond what the previous code was capable of. User control has been deliberately sabotaged, it's not safe to use still.
- Thermal management / fan control that's been present for a while is turned ON by default now.
- Misc other fixes that have accumulated
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (74 commits)
drm/nouveau/fb: implement various bits of work towards memory reclocking
drm/nouveau: implement a simple sysfs interface to new pm code
drm/nouveau/device: initial control object class, with pstate control methods
drm/nouveau/clk: implement power state and engine clock control in core
drm/nouveau/volt: implement voltage control in core
drm/nouveau/bios: parsing for various tables required for power management
drm/nouveau/perfmon: initial infrastructure to expose performance counters
drm/nouveau/bus: add interfaces/helpers for sequencer
drm/nouveau/bus: make external class definitions pointers
drm/nouveau/pwr: initial implementation
drm/nouveau/therm: update target fanspeed outside of therm lock
drm/nouveau/therm: automatic mode by default
drm/nouveau/therm: no toggle fan control either if we can't guarantee no pwm connected
drm/nvc0/therm: allow fan control if we've killed the vbios ppwr ucode
drm/nouveau/therm: if no bios trip/linear info, default to perf-suggested speed
drm/nouveau/therm: add hook for clk to suggest fanspeed to therm
drm/nouveau/pwr: assign a subdev id for upcoming implementation
drm/nouveau/gpio: return different error code for not found vs invalid
drm/nouveau/drm/pm: remove everything except the hwmon interfaces to THERM
drm/nouveau/core: make all info-level messages silent for runtime pm
...
Matches the nv94-nvc0 commit with the same title. Doesn't fix a reported issue,
but NVIDIA use this ordering here too, so let's do it just in case.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch adds a way to define a custom delay when scanning for i2c devices
because the adt7473 sometimes doesn't like the default bitbanging udelay.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Certain combinations of hardware can't actually support the maximum
detected speed. Add a quirk list that lists pairs of hostbridge/chip pci
ids and the mode that they should work with.
See https://bugs.freedesktop.org/show_bug.cgi?id=20341
Reported-by: Jason Detring <detringj@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
