Commit graph

24498 commits

Author SHA1 Message Date
Arnd Bergmann 87aeb54f1b kvm: x86: use getboottime64
KVM reads the current boottime value as a struct timespec in order to
calculate the guest wallclock time, resulting in an overflow in 2038
on 32-bit systems.

The data then gets passed as an unsigned 32-bit number to the guest,
and that in turn overflows in 2106.

We cannot do much about the second overflow, which affects both 32-bit
and 64-bit hosts, but we can ensure that they both behave the same
way and don't overflow until 2106, by using getboottime64() to read
a timespec64 value.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-23 19:17:30 +02:00
Ashok Raj c45dcc71b7 KVM: VMX: enable guest access to LMCE related MSRs
On Intel platforms, this patch adds LMCE to KVM MCE supported
capabilities and handles guest access to LMCE related MSRs.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
[Haozhong: macro KVM_MCE_CAP_SUPPORTED => variable kvm_mce_cap_supported
           Only enable LMCE on Intel platform
           Check MSR_IA32_FEATURE_CONTROL when handling guest
             access to MSR_IA32_MCG_EXT_CTL]
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-23 19:17:29 +02:00
Haozhong Zhang 37e4c997da KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL
KVM currently does not check the value written to guest
MSR_IA32_FEATURE_CONTROL, though bits corresponding to disabled features
may be set. This patch makes KVM to validate individual bits written to
guest MSR_IA32_FEATURE_CONTROL according to enabled features.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-23 19:17:29 +02:00
Haozhong Zhang 3b84080b95 KVM: VMX: move msr_ia32_feature_control to vcpu_vmx
msr_ia32_feature_control will be used for LMCE and not depend only on
nested anymore, so move it from struct nested_vmx to struct vcpu_vmx.

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-23 19:17:28 +02:00
Yunhong Jiang 64672c95ea kvm: vmx: hook preemption timer support
Hook the VMX preemption timer to the "hv timer" functionality added
by the previous patch.  This includes: checking if the feature is
supported, if the feature is broken on the CPU, the hooks to
setup/clean the VMX preemption timer, arming the timer on vmentry
and handling the vmexit.

A module parameter states if the VMX preemption timer should be
utilized.

Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
[Move hv_deadline_tsc to struct vcpu_vmx, use -1 as the "unset" value.
 Put all VMX bits here.  Enable it by default #yolo. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 10:07:50 +02:00
Yunhong Jiang bc22512bb2 kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block
Prepare to switch from preemption timer to hrtimer in the
vmx_pre/post_block. Current functions are only for posted interrupt,
rename them accordingly.

Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 10:07:49 +02:00
Yunhong Jiang ce7a058a21 KVM: x86: support using the vmx preemption timer for tsc deadline timer
The VMX preemption timer can be used to virtualize the TSC deadline timer.
The VMX preemption timer is armed when the vCPU is running, and a VMExit
will happen if the virtual TSC deadline timer expires.

When the vCPU thread is blocked because of HLT, KVM will switch to use
an hrtimer, and then go back to the VMX preemption timer when the vCPU
thread is unblocked.

This solution avoids the complex OS's hrtimer system, and the host
timer interrupt handling cost, replacing them with a little math
(for guest->host TSC and host TSC->preemption timer conversion)
and a cheaper VMexit.  This benefits latency for isolated pCPUs.

[A word about performance... Yunhong reported a 30% reduction in average
 latency from cyclictest.  I made a similar test with tscdeadline_latency
 from kvm-unit-tests, and measured

 - ~20 clock cycles loss (out of ~3200, so less than 1% but still
   statistically significant) in the worst case where the test halts
   just after programming the TSC deadline timer

 - ~800 clock cycles gain (25% reduction in latency) in the best case
   where the test busy waits.

 I removed the VMX bits from Yunhong's patch, to concentrate them in the
 next patch - Paolo]

Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 10:07:48 +02:00
Yunhong Jiang 53f9eedff7 kvm: lapic: separate start_sw_tscdeadline from start_apic_timer
The function to start the tsc deadline timer virtualization will be used
also by the pre_block hook when we use the preemption timer; change it
to a separate function. No logic changes.

Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 10:07:46 +02:00
Paolo Bonzini 557abc40d1 KVM: remove kvm_vcpu_compatible
The new created_vcpus field makes it possible to avoid the race between
irqchip and VCPU creation in a much nicer way; just check under kvm->lock
whether a VCPU has already been created.

We can then remove KVM_APIC_ARCHITECTURE too, because at this point the
symbol is only governing the default definition of kvm_vcpu_compatible.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 00:05:00 +02:00
Borislav Petkov 682a810887 x86/kvm/svm: Simplify cpu_has_svm()
Use already cached CPUID information instead of querying CPUID again.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: kvm@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 00:04:31 +02:00
Andrea Gelmini bb3541f175 KVM: x86: Fix typos
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14 11:16:28 +02:00
Kai Huang dca4d72877 kvm/x86: remove unnecessary header file inclusion
arch/x86/kvm/iommu.c includes <linux/intel-iommu.h> and <linux/dmar.h>, which
both are unnecessary, in fact incorrect to be here as they are intel specific.

Building kvm on x86 passed after removing above inclusion.

Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-03 15:28:19 +02:00
Paolo Bonzini 250715a617 KVM: x86: protect KVM_CREATE_PIT/KVM_CREATE_PIT2 with kvm->lock
The syzkaller folks reported a NULL pointer dereference that seems
to be cause by a race between KVM_CREATE_IRQCHIP and KVM_CREATE_PIT2.
The former takes kvm->lock (except when registering the devices,
which needs kvm->slots_lock); the latter takes kvm->slots_lock only.
Change KVM_CREATE_PIT2 to follow the same model as KVM_CREATE_IRQCHIP.

Testcase:

    #include <pthread.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <stdint.h>
    #include <string.h>
    #include <stdlib.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    long r[23];

    void* thr1(void* arg)
    {
        struct kvm_pit_config pitcfg = { .flags = 4 };
        switch ((long)arg) {
        case 0: r[2]  = open("/dev/kvm", O_RDONLY|O_ASYNC);    break;
        case 1: r[3]  = ioctl(r[2], KVM_CREATE_VM, 0);         break;
        case 2: r[4]  = ioctl(r[3], KVM_CREATE_IRQCHIP, 0);    break;
        case 3: r[22] = ioctl(r[3], KVM_CREATE_PIT2, &pitcfg); break;
        }
        return 0;
    }

    int main(int argc, char **argv)
    {
        long i;
        pthread_t th[4];

        memset(r, -1, sizeof(r));
        for (i = 0; i < 4; i++) {
            pthread_create(&th[i], 0, thr, (void*)i);
            if (argc > 1 && rand()%2) usleep(rand()%1000);
        }
        usleep(20000);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-03 15:28:19 +02:00
Paolo Bonzini ee2cd4b755 KVM: x86: rename process_smi to enter_smm, process_smi_request to process_smi
Make the function names more similar between KVM_REQ_NMI and KVM_REQ_SMI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-03 15:28:19 +02:00
Paolo Bonzini c43203cab1 KVM: x86: avoid simultaneous queueing of both IRQ and SMI
If the processor exits to KVM while delivering an interrupt,
the hypervisor then requeues the interrupt for the next vmentry.
Trying to enter SMM in this same window causes to enter non-root
mode in emulated SMM (i.e. with IF=0) and with a request to
inject an IRQ (i.e. with a valid VM-entry interrupt info field).
This is invalid guest state (SDM 26.3.1.4 "Check on Guest RIP
and RFLAGS") and the processor fails vmentry.

The fix is to defer the injection from KVM_REQ_SMI to KVM_REQ_EVENT,
like we already do for e.g. NMIs.  This patch doesn't change the
name of the process_smi function so that it can be applied to
stable releases.  The next patch will modify the names so that
process_nmi and process_smi handle respectively KVM_REQ_NMI and
KVM_REQ_SMI.

This is especially common with Windows, probably due to the
self-IPI trick that it uses to deliver deferred procedure
calls (DPCs).

Reported-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
Fixes: 64d6067057
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-03 15:28:19 +02:00
Paolo Bonzini d14bdb553f KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Paolo Bonzini 78e546c824 KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return
EINVAL.  It causes a WARN from exception_type:

    WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]()
    CPU: 3 PID: 16732 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2
     ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa0924809>] exception_type+0x49/0x50 [kvm]
     [<ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm]
     [<ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
    ---[ end trace b1a0391266848f50 ]---

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <linux/kvm.h>

    long r[31];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0);

        struct kvm_vcpu_events ve = {
                .exception.injected = 1,
                .exception.nr = 0xd4
        };
        r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve);
        r[30] = ioctl(r[7], KVM_RUN, 0);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Paolo Bonzini 83676e9238 KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
This causes an ugly dmesg splat.  Beautified syzkaller testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        struct kvm_cpuid2 c = { 0 };
        r[2] = open("/dev/kvm", O_RDWR);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8);
        r[7] = ioctl(r[4], KVM_SET_CPUID, &c);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Paolo Bonzini b21629da12 kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
Found by syzkaller:

    WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]()
    CPU: 3 PID: 15175 Comm: a.out Tainted: G        W       4.4.6-300.fc23.x86_64 #1
    Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
     0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e
     0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2
     00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000
    Call Trace:
     [<ffffffff813b542e>] dump_stack+0x63/0x85
     [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0
     [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm]
     [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm]
     [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel]
     [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm]
     [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm]
     [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71

Testcase:

    #include <unistd.h>
    #include <sys/ioctl.h>
    #include <fcntl.h>
    #include <string.h>
    #include <linux/kvm.h>

    long r[8];

    int main()
    {
        memset(r, -1, sizeof(r));
	r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);
        r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Dmitry Bilunov 0c2df2a1af KVM: Handle MSR_IA32_PERF_CTL
Intel CPUs having Turbo Boost feature implement an MSR to provide a
control interface via rdmsr/wrmsr instructions. One could detect the
presence of this feature by issuing one of these instructions and
handling the #GP exception which is generated in case the referenced MSR
is not implemented by the CPU.

KVM's vCPU model behaves exactly as a real CPU in this case by injecting
a fault when MSR_IA32_PERF_CTL is called (which KVM does not support).
However, some operating systems use this register during an early boot
stage in which their kernel is not capable of handling #GP correctly,
causing #DP and finally a triple fault effectively resetting the vCPU.

This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the
crashes.

Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Nadav Amit b19ee2ff3b KVM: x86: avoid write-tearing of TDP
In theory, nothing prevents the compiler from write-tearing PTEs, or
split PTE writes. These partially-modified PTEs can be fetched by other
cores and cause mayhem. I have not really encountered such case in
real-life, but it does seem possible.

For example, the compiler may try to do something creative for
kvm_set_pte_rmapp() and perform multiple writes to the PTE.

Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02 17:38:50 +02:00
Linus Torvalds 7d8eb50290 Merge branch 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
 "This contains a nice FPU fixup from Eli Cooper for UML"

* 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: add extended processor state save/restore support
  um: extend fpstate to _xstate to support YMM registers
  um: fix FPU state preservation around signal handlers
2016-05-27 18:54:59 -07:00
Linus Torvalds 5d22fc25d4 mm: remove more IS_ERR_VALUE abuses
The do_brk() and vm_brk() return value was "unsigned long" and returned
the starting address on success, and an error value on failure.  The
reasons are entirely historical, and go back to it basically behaving
like the mmap() interface does.

However, nobody actually wanted that interface, and it causes totally
pointless IS_ERR_VALUE() confusion.

What every single caller actually wants is just the simpler integer
return of zero for success and negative error number on failure.

So just convert to that much clearer and more common calling convention,
and get rid of all the IS_ERR_VALUE() uses wrt vm_brk().

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 15:57:31 -07:00
Linus Torvalds 1e8143db75 platform-drivers-x86 for 4.7-1
Mostly minor updates and cleanups. One new power management controller driver
 for Intel Core SoCs.
 
 platform/x86:
  - Add PMC Driver for Intel Core SoC
 
 dell-rbtn:
  - Ignore ACPI notifications if device is suspended
 
 thinkpad_acpi:
  - save kbdlight state on suspend and restore it on resume
 
 intel_menlow:
  - reduce code duplication
 
 asus-wmi:
  - provide access to ALS control
 
 ideapad-laptop:
  - add a new WMI string for ESC key
 
 surfacepro3_button:
  - Add a warning when switching to tablet mode
 
 sony-laptop:
  - Avoid oops on module unload for older laptops
 
 intel_telemetry:
  - Constify telemetry_core_ops structures
 
 fujitsu-laptop:
  - Use IS_ENABLED() instead of checking for built-in or module
 
 asus-laptop:
  - correct error handling in sysfs_acpi_set
  - remove redundant initializers
  - correct error handling in asus_read_brightness()
 
 fujitsu-laptop:
  - Support radio LED
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXSJh4AAoJEKbMaAwKp3647kkIAIRi8inUCfPQsvpi7iEfaAW7
 vaLvIOFfRxu+WHzYOrhrAg17yscA18xTRtp32dhjHF3w6zJsbsZ9nEqCcRliQG2+
 /i6EdC1ZnboyWWW82HbFGK8r5PMpPJa2p7wPhrEuPcM3aak+bWfCD96HdjFsoxfT
 Vda/2L9grvQwcUczRARh4k6sHQTsdV+tU5MF5Kefso1l31qMyO8A3PNgCPFWtCht
 St0hlRs4SnZS97Bw7IIbP93AiLBejT1jtRHddvpEnj7GaPaBMpBSUqN3KgZRVnfL
 Bln3iPkq+1TVprcizt60X++czfOAWmce1jF9D4oVS5FGW0yIoog0aik2H1rrY64=
 =m/0/
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Mostly minor updates and cleanups.  One new power management
  controller driver for Intel Core SoCs.

  platform/x86:
   - Add PMC Driver for Intel Core SoC

  dell-rbtn:
   - Ignore ACPI notifications if device is suspended

  thinkpad_acpi:
   - save kbdlight state on suspend and restore it on resume

  intel_menlow:
   - reduce code duplication

  asus-wmi:
   - provide access to ALS control

  ideapad-laptop:
   - add a new WMI string for ESC key

  surfacepro3_button:
   - Add a warning when switching to tablet mode

  sony-laptop:
   - Avoid oops on module unload for older laptops

  intel_telemetry:
   - Constify telemetry_core_ops structures

  fujitsu-laptop:
   - Use IS_ENABLED() instead of checking for built-in or module

  asus-laptop:
   - correct error handling in sysfs_acpi_set
   - remove redundant initializers
   - correct error handling in asus_read_brightness()

  fujitsu-laptop:
   - Support radio LED"

* tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: Add PMC Driver for Intel Core SoC
  dell-rbtn: Ignore ACPI notifications if device is suspended
  thinkpad_acpi: save kbdlight state on suspend and restore it on resume
  intel_menlow: reduce code duplication
  asus-wmi: provide access to ALS control
  ideapad-laptop: add a new WMI string for ESC key
  surfacepro3_button: Add a warning when switching to tablet mode
  sony-laptop: Avoid oops on module unload for older laptops
  intel_telemetry: Constify telemetry_core_ops structures
  fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module
  asus-laptop: correct error handling in sysfs_acpi_set
  asus-laptop: remove redundant initializers
  asus-laptop: correct error handling in asus_read_brightness()
  fujitsu-laptop: Support radio LED
2016-05-27 13:56:02 -07:00
Linus Torvalds e28e909c36 - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat
(kvm_stat had nothing to do with QEMU in the first place -- the tool
    only interprets debugfs)
 - expose per-vm statistics in debugfs and support them in kvm_stat
   (KVM always collected per-vm statistics, but they were summarised into
    global statistics)
 
 x86:
  - fix dynamic APICv (VMX was improperly configured and a guest could
    access host's APIC MSRs, CVE-2016-4440)
  - minor fixes
 
 ARM changes from Christoffer Dall:
  "This set of changes include the new vgic, which is a reimplementation
   of our horribly broken legacy vgic implementation.  The two
   implementations will live side-by-side (with the new being the
   configured default) for one kernel release and then we'll remove the
   legacy one.
 
   Also fixes a non-critical issue with virtual abort injection to
   guests."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJXRz0KAAoJEED/6hsPKofosiMIAIHmRI+9I6VMNmQe5vrZKz9/
 vt89QGxDJrFQwhEuZovenLEDaY6rMIJNguyvIbPhNuXNHIIPWbe6cO6OPwByqkdo
 WI/IIqcAJN/Bpwt4/Y2977A5RwDOwWLkaDs0LrZCEKPCgeh9GWQf+EfyxkDJClhG
 uIgbSAU+t+7b05K3c6NbiQT/qCzDTCdl6In6PI/DFSRRkXDaTcopjjp1PmMUSSsR
 AM8LGhEzMer+hGKOH7H5TIbN+HFzAPjBuDGcoZt0/w9IpmmS5OMd3ZrZ320cohz8
 zZQooRcFrT0ulAe+TilckmRMJdMZ69fyw3nzfqgAKEx+3PaqjKSY/tiEgqqDJHY=
 =EEBK
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second batch of KVM updates from Radim Krčmář:
 "General:

   - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat
     had nothing to do with QEMU in the first place -- the tool only
     interprets debugfs)

   - expose per-vm statistics in debugfs and support them in kvm_stat
     (KVM always collected per-vm statistics, but they were summarised
     into global statistics)

  x86:

   - fix dynamic APICv (VMX was improperly configured and a guest could
     access host's APIC MSRs, CVE-2016-4440)

   - minor fixes

  ARM changes from Christoffer Dall:

   - new vgic reimplementation of our horribly broken legacy vgic
     implementation.  The two implementations will live side-by-side
     (with the new being the configured default) for one kernel release
     and then we'll remove the legacy one.

   - fix for a non-critical issue with virtual abort injection to guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
  tools: kvm_stat: Add comments
  tools: kvm_stat: Introduce pid monitoring
  KVM: Create debugfs dir and stat files for each VM
  MAINTAINERS: Add kvm tools
  tools: kvm_stat: Powerpc related fixes
  tools: Add kvm_stat man page
  tools: Add kvm_stat vm monitor script
  kvm:vmx: more complete state update on APICv on/off
  KVM: SVM: Add more SVM_EXIT_REASONS
  KVM: Unify traced vector format
  svm: bitwise vs logical op typo
  KVM: arm/arm64: vgic-new: Synchronize changes to active state
  KVM: arm/arm64: vgic-new: enable build
  KVM: arm/arm64: vgic-new: implement mapped IRQ handling
  KVM: arm/arm64: vgic-new: Wire up irqfd injection
  KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable
  KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create
  KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init
  ...
2016-05-27 13:41:54 -07:00
Rajneesh Bhardwaj b740d2e923 platform/x86: Add PMC Driver for Intel Core SoC
This patch adds the Power Management Controller driver as a PCI driver
for Intel Core SoC architecture.

This driver can utilize debugging capabilities and supported features
as exposed by the Power Management Controller.

Please refer to the below specification for more details on PMC features.
http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html

The current version of this driver exposes SLP_S0_RESIDENCY counter.
This counter can be used for detecting fragile SLP_S0 signal related
failures and take corrective actions when PCH SLP_S0 signal is not
asserted after kernel freeze as part of suspend to idle flow
(echo freeze > /sys/power/state).

Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it
detects favorable conditions to enter its low power mode. As a
pre-requisite the SoC should be in deepest possible Package C-State
and devices should be in low power mode. For example, on Skylake SoC
the deepest Package C-State is Package C10 or PC10. Suspend to idle
flow generally leads to PC10 state but PC10 state may not be sufficient
for realizing the platform wide power potential which SLP_S0 signal
assertion can provide.

SLP_S0 signal is often connected to the Embedded Controller (EC) and the
Power Management IC (PMIC) for other platform power management related
optimizations.

In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes
power gated + PLL Idle.

As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed
as an API and also debugfs features are added to indicate SLP_S0 signal
assertion residency in microseconds.

echo freeze > /sys/power/state
wake the system
cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:56 -07:00
Linus Torvalds 5b26fc8824 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...
2016-05-26 22:01:22 -07:00
Linus Torvalds 2f7c3a18a2 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Misc fixes: EFI, entry code, pkeys and MPX fixes, TASK_SIZE cleanups
  and a tsc frequency table fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault code
  x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limits
  x86/mm/mpx: Work around MPX erratum SKD046
  x86/entry/64: Fix stack return address retrieval in thunk
  x86/efi: Fix 7-parameter efi_call()s
  x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeys
  x86/tsc: Add missing Cherrytrail frequency to the table
2016-05-25 17:37:33 -07:00
Linus Torvalds bdc6b758e4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Mostly tooling and PMU driver fixes, but also a number of late updates
  such as the reworking of the call-chain size limiting logic to make
  call-graph recording more robust, plus tooling side changes for the
  new 'backwards ring-buffer' extension to the perf ring-buffer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  perf record: Read from backward ring buffer
  perf record: Rename variable to make code clear
  perf record: Prevent reading invalid data in record__mmap_read
  perf evlist: Add API to pause/resume
  perf trace: Use the ptr->name beautifier as default for "filename" args
  perf trace: Use the fd->name beautifier as default for "fd" args
  perf report: Add srcline_from/to branch sort keys
  perf evsel: Record fd into perf_mmap
  perf evsel: Add overwrite attribute and check write_backward
  perf tools: Set buildid dir under symfs when --symfs is provided
  perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
  perf annotate: Sort list of recognised instructions
  perf annotate: Fix identification of ARM blt and bls instructions
  perf tools: Fix usage of max_stack sysctl
  perf callchain: Stop validating callchains by the max_stack sysctl
  perf trace: Fix exit_group() formatting
  perf top: Use machine->kptr_restrict_warned
  perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
  perf machine: Do not bail out if not managing to read ref reloc symbol
  perf/x86/intel/p4: Trival indentation fix, remove space
  ...
2016-05-25 17:05:40 -07:00
Roman Kagan 3ce424e454 kvm:vmx: more complete state update on APICv on/off
The function to update APICv on/off state (in particular, to deactivate
it when enabling Hyper-V SynIC) is incomplete: it doesn't adjust
APICv-related fields among secondary processor-based VM-execution
controls.  As a result, Windows 2012 guests get stuck when SynIC-based
auto-EOI interrupt intersected with e.g. an IPI in the guest.

In addition, the MSR intercept bitmap isn't updated every time "virtualize
x2APIC mode" is toggled.  This path can only be triggered by a malicious
guest, because Windows didn't use x2APIC but rather their own synthetic
APIC access MSRs; however a guest running in a SynIC-enabled VM could
switch to x2APIC and thus obtain direct access to host APIC MSRs
(CVE-2016-4440).

The patch fixes those omissions.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reported-by: Steve Rutherford <srutherford@google.com>
Reported-by: Yang Zhang <yang.zhang.wz@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25 16:11:37 +02:00
Linus Torvalds 29567292c0 xen: bug fixes for 4.7-rc0
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXRGqXAAoJEFxbo/MsZsTRSr8H/AwybQygAqBPoxsC2VkdSD0u
 csHnXuG/37ABep55A0ZgNIwq/JNK1m7K0+Xq6S6pO6UTH8gl32Fx2uPiHoXEdzmK
 KfwQPx8ETaVtOSrzPJdPdspXTNngEsvopTPGPRKG6VNE3JwtTiwkHcXiez6nJ8XB
 2YqGjYOdKNsu/sAUo5aCrc7eCcdCu/hc6pWFNtfSBRSLhR1Eofl81B6B0BCvi5D0
 5/TOX+YnZ4omNeYlxghFvZKa/HyfE/0CONbyijjVoLcd8i2EptNosdCc9WgRTOAZ
 nwnsABYg0izPZYNgr5HJUwfNLnVymtg8gg7b2WpKkM0Xvd7uPjrYA1vpHh1yA48=
 =OfVJ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen bug fixes from David Vrabel.

* tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: use same main loop for counting and remapping pages
  xen/events: Don't move disabled irqs
  xen/x86: actually allocate legacy interrupts on PV guests
  Xen: don't warn about 2-byte wchar_t in efi
  xen/gntdev: reduce copy batch size to 16
  xen/x86: don't lose event interrupts
2016-05-24 10:22:34 -07:00
Juergen Gross dd14be92fb xen: use same main loop for counting and remapping pages
Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.

Suggested-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-24 12:59:04 +01:00
Stefano Stabellini 702f926067 xen/x86: actually allocate legacy interrupts on PV guests
b4ff8389ed is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org
2016-05-24 12:58:19 +01:00
Stefano Stabellini c06b6d70fe xen/x86: don't lose event interrupts
On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
2016-05-24 12:58:17 +01:00
Jan Kiszka 079d08555c KVM: SVM: Add more SVM_EXIT_REASONS
Useful when tracing nested setups where the guest may trigger more than
the host usually does. But even some typical host exits were missing.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 12:11:08 +02:00
Dan Carpenter 5446a979e0 svm: bitwise vs logical op typo
These were supposed to be a bitwise operation but there is a typo.
The result is mostly harmless, but sparse correctly complains.

Fixes: 44a95dae1d ('KVM: x86: Detect and Initialize AVIC support')
Fixes: 18f40c53e1 ('svm: Add VMEXIT handlers for AVIC')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 12:11:05 +02:00
Michal Hocko 6904817607 vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Michal Hocko 864778b154 mm, aout: handle vm_brk failures
vm_brk is allowed to fail but load_aout_binary simply ignores the error
and happily continues.  I haven't noticed any problem from that in real
life but later patches will make the failure more likely because vm_brk
will become killable (resp.  mmap_sem for write waiting will become
killable) so we should be more careful now.

The error handling should be quite straightforward because there are
calls to vm_mmap which check the error properly already.  The only
notable exception is set_brk which is called after beyond_if label.  But
nothing indicates that we cannot move it above set_binfmt as the two do
not depend on each other and fail before we do set_binfmt and alter
reference counting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Konstantin Khlebnikov 7efb2a7b85 arch/defconfig: remove CONFIG_RESOURCE_COUNTERS
This option was replaced by PAGE_COUNTER which is selected by MEMCG.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Xunlei Pang 1e5768ae75 kexec: provide arch_kexec_protect(unprotect)_crashkres()
Implement the protection method for the crash kernel memory reservation
for the 64-bit x86 kdump.

Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Minfei Huang <mhuang@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Linus Torvalds 7639dad93a Three more changes.
1) I forgot that I had another selftest to stress test the ftrace
    instance creation. It was actually suppose to go into the 4.6
    merge window, but I never committed it. I almost forgot about it
    again, but noticed it was missing from your tree.
 
 2) Soumya PN sent me a clean up patch to not disable interrupts when
    taking the tasklist_lock for read, as it's unnecessary because
    that lock is never taken for write in irq context.
 
 3) Newer gcc's can cause the jump in the function_graph code to the
    global ftrace_stub label to be a short jump instead of a long one.
    As that jump is dynamically converted to jump to the trace code to
    do function graph tracing, and that conversion expects a long jump
    it can corrupt the ftrace_stub itself (it's directly after that call).
    One way to prevent gcc from using a short jump is to declare the
    ftrace_stub as a weak function, which we do here to keep gcc from
    optimizing too much.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXQhYQAAoJEKKk/i67LK/82pAH/3XzRCP366HqWnKdvluPB8vX
 UnVoXGAX1Eh2ZpvlPIJBXNYOZlnGRMMMAoeI+su31FoJHrzTzfGXvRynTkZPFZtd
 XakvHfACjtGtvi2MuCN1t9/d1ty/ob2o05KB9qc+JRlzHM09qTL/HX8hwZeEsMQ4
 NYgEY4Y727LOSCrJieLktchpwtie77q8Wq25oiWIVWOyDjpCsPnZyaOqaQSANot9
 Gd00cixbMam7Ba1BjoRsRQZaT2pYZ8vt7HDXDBfAOW1oOjalWARLhRg/zww1V3WD
 DEptuEeyAgMJS3v76Z6Sbk/QM7hyGUWCcmC2qaN1yc2n1Sh+zBOiN1eyiiUh/2U=
 =ERxv
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull motr tracing updates from Steven Rostedt:
 "Three more changes.

   - I forgot that I had another selftest to stress test the ftrace
     instance creation.  It was actually suppose to go into the 4.6
     merge window, but I never committed it.  I almost forgot about it
     again, but noticed it was missing from your tree.

   - Soumya PN sent me a clean up patch to not disable interrupts when
     taking the tasklist_lock for read, as it's unnecessary because that
     lock is never taken for write in irq context.

   - Newer gcc's can cause the jump in the function_graph code to the
     global ftrace_stub label to be a short jump instead of a long one.
     As that jump is dynamically converted to jump to the trace code to
     do function graph tracing, and that conversion expects a long jump
     it can corrupt the ftrace_stub itself (it's directly after that
     call).  One way to prevent gcc from using a short jump is to
     declare the ftrace_stub as a weak function, which we do here to
     keep gcc from optimizing too much"

* tag 'trace-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it
  ftrace: Don't disable irqs when taking the tasklist_lock read_lock
  ftracetest: Add instance created, delete, read and enable event test
2016-05-22 19:40:39 -07:00
Linus Torvalds bd28b14591 x86: remove more uaccess_32.h complexity
I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.

For example, the 32-bit version of "__copy_from_user_inatomic()" is
mostly the special cases for the constant size, and it's actually almost
never relevant.  Most users aren't actually using a constant size
anyway, and the few cases that do small constant copies are better off
just using __get_user() instead.

So get rid of the unnecessary complexity.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-22 17:21:27 -07:00
Linus Torvalds 5b09c3edec x86: remove pointless uaccess_32.h complexity
I'm looking at trying to possibly merge the 32-bit and 64-bit versions
of the x86 uaccess.h implementation, but first this needs to be cleaned
up.

For example, the 32-bit version of "__copy_to_user_inatomic()" is mostly
the special cases for the constant size, and it's actually never
relevant.  Every user except for one aren't actually using a constant
size anyway, and the one user that uses it is better off just using
__put_user() instead.

So get rid of the unnecessary complexity.

[ The same cleanup should likely happen to __copy_from_user_inatomic()
  as well, but that one has a lot more users that I need to take a look
  at first ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-22 14:19:37 -07:00
Eli Cooper a78ff11122 um: add extended processor state save/restore support
This patch extends save_fp_registers() and restore_fp_registers() to use
PTRACE_GETREGSET and PTRACE_SETREGSET with the XSTATE note type, adding
support for new processor state extensions between context switches.

When the new ptrace requests are unavailable, it falls back to the old
PTRACE_GETFPREGS and PTRACE_SETFPREGS methods, which have been renamed to
save_i387_registers() and restore_i387_registers().

Now these functions expect *fp_regs to have the space of an _xstate struct.
Thus, this also makes ptrace in UML responde to PTRACE_GETFPREGS/_SETFPREG
requests with a user_i387_struct (thus independent from HOST_FP_SIZE), and
by calling save_i387_registers() and restore_i387_registers() instead of
the extended save_fp_registers() and restore_fp_registers() functions.

Signed-off-by: Eli Cooper <elicooper@gmx.com>
2016-05-21 23:38:06 +02:00
Eli Cooper b6024b21fe um: extend fpstate to _xstate to support YMM registers
Extends fpstate to _xstate, in order to hold AVX/YMM registers.

To avoid oversized stack frame, the following functions have been
refactored by using malloc.
 - sig_handler_common
 - timer_real_alarm_handler

Signed-off-by: Eli Cooper <elicooper@gmx.com>
2016-05-21 23:37:40 +02:00
Eli Cooper 6de5a8a500 um: fix FPU state preservation around signal handlers
This patch makes UML saves/restores FPU state from/to the fpstate in
pt_regs when setting up or returning from a signal stack, rather than
calling ptrace directly. This ensures that FPU state is correctly
preserved around signal handlers in a multi-threaded scenario.

Signed-off-by: Eli Cooper <elicooper@gmx.com>
2016-05-21 23:37:16 +02:00
Linus Torvalds 51e68d055c x86 isa: add back X86_32 dependency on CONFIG_ISA
Commit b3c1be1b78 ("base: isa: Remove X86_32 dependency") made ISA
support available on x86-64 too.  That's not right - while there are
some LPC-style devices that might be useful still and be based on
ISA-like IP blocks, that is *not* an excuse to try to enable any random
legacy drivers.

Such drivers should be individually enabled and made to perhaps depend
on ISA_DMA_API instead (which we have continued to support on x86-64).
Or we could add another "ISA_XYZ_API" that we support that doesn't
enable random old drivers that aren't even 64-bit clean nor do we have
any test coverage for.

Turning off ISA will now also turn off some drivers that have been
marked as depending on it as part of this series, and that used to work
on modern platforms.

See for example commits ad7afc38eab3..cc736607c86d, which may also need
to be reverted.

This commit means that the warnings that came in due to enabling ISA
widely are now gone again.

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 10:25:19 -07:00
Linus Torvalds 5469dc270c Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - the rest of MM

 - KASAN updates

 - procfs updates

 - exit, fork updates

 - printk updates

 - lib/ updates

 - radix-tree testsuite updates

 - checkpatch updates

 - kprobes updates

 - a few other misc bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
  samples/kprobes: print out the symbol name for the hooks
  samples/kprobes: add a new module parameter
  kprobes: add the "tls" argument for j_do_fork
  init/main.c: simplify initcall_blacklisted()
  fs/efs/super.c: fix return value
  checkpatch: improve --git <commit-count> shortcut
  checkpatch: reduce number of `git log` calls with --git
  checkpatch: add support to check already applied git commits
  checkpatch: add --list-types to show message types to show or ignore
  checkpatch: advertise the --fix and --fix-inplace options more
  checkpatch: whine about ACCESS_ONCE
  checkpatch: add test for keywords not starting on tabstops
  checkpatch: improve CONSTANT_COMPARISON test for structure members
  checkpatch: add PREFER_IS_ENABLED test
  lib/GCD.c: use binary GCD algorithm instead of Euclidean
  radix-tree: free up the bottom bit of exceptional entries for reuse
  dax: move RADIX_DAX_ definitions to dax.c
  radix-tree: make radix_tree_descend() more useful
  radix-tree: introduce radix_tree_replace_clear_tags()
  radix-tree: tidy up __radix_tree_create()
  ...
2016-05-20 22:31:33 -07:00
Linus Torvalds 3aa2fc1667 driver core update for 4.7-rc1
Here's the "big" driver core update for 4.7-rc1.
 
 Mostly just debugfs changes, the long-known and messy races with removing
 debugfs files should be fixed thanks to the great work of Nicolai Stange.  We
 also have some isa updates in here (the x86 maintainers told me to take it
 through this tree), a new warning when we run out of dynamic char major
 numbers, and a few other assorted changes, details in the shortlog.
 
 All have been in linux-next for some time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0mwACgkQMUfUDdst+ynjXACgjNxR5nMUiM8ZuuD0i4Xj7VXd
 hnIAoM08+XDCv41noGdAcKv+2WZVZWMC
 =i+0H
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the "big" driver core update for 4.7-rc1.

  Mostly just debugfs changes, the long-known and messy races with
  removing debugfs files should be fixed thanks to the great work of
  Nicolai Stange.  We also have some isa updates in here (the x86
  maintainers told me to take it through this tree), a new warning when
  we run out of dynamic char major numbers, and a few other assorted
  changes, details in the shortlog.

  All have been in linux-next for some time with no reported issues"

* tag 'driver-core-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  Revert "base: dd: don't remove driver_data in -EPROBE_DEFER case"
  gpio: ws16c48: Utilize the ISA bus driver
  gpio: 104-idio-16: Utilize the ISA bus driver
  gpio: 104-idi-48: Utilize the ISA bus driver
  gpio: 104-dio-48e: Utilize the ISA bus driver
  watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
  iio: stx104: Add X86 dependency to STX104 Kconfig option
  Documentation: Add ISA bus driver documentation
  isa: Implement the max_num_isa_dev macro
  isa: Implement the module_isa_driver macro
  pnp: pnpbios: Add explicit X86_32 dependency to PNPBIOS
  isa: Decouple X86_32 dependency from the ISA Kconfig option
  driver-core: use 'dev' argument in dev_dbg_ratelimited stub
  base: dd: don't remove driver_data in -EPROBE_DEFER case
  kernfs: Move faulting copy_user operations outside of the mutex
  devcoredump: add scatterlist support
  debugfs: unproxify files created through debugfs_create_u32_array()
  debugfs: unproxify files created through debugfs_create_blob()
  debugfs: unproxify files created through debugfs_create_bool()
  ...
2016-05-20 21:26:15 -07:00
Petr Mladek 42a0bb3f71 printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc88093 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00