Just pass the transmitted CEC message to all CEC adapters.
This implements the Monitor All mode for vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now driver returns correct values for DVB-C:
SNR (in dB)
[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
now driver returns correct values for DVB-C:
BER (post_bit_count and post_bit_error values)
UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.
Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Appling the mask 0x0f to the immediate return of the call to
mb86a20s_readreg will always result in a positive value, meaning that the
check of ret < 0 will never work. Instead, check for a -ve return value
first, and then mask val with 0x0f.
Kudos to Mauro Carvalho Chehab for spotting the mistake in my original fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch addresses CVE-2016-5400, a local DOS vulnerability caused by
a memory leak in the airspy usb device driver.
The vulnerability is triggered when more than 64 usb devices register
with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.A badusb device can
emulate 64 of these devices then through continual emulated
connect/disconnect of the 65th device, cause the kernel to run out of
RAM and crash the kernel.
The vulnerability exists in kernel versions from 3.17 to current 4.7.
The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Cc: stable@vger.kernel.org # Up to Kernel 3.17
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix typo in vivid that caused all HDMI outputs to have the same
physical address.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When calculate OUTPUT buffer size in vidioc_try_fmt, it will
add more size hw need in each plane.
But in mtk_vcodec_enc_set_default_params, it do not add
same size in each plane.
This makes v4l2-compliance test fail.
This patch fix the issue.
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The newly added mtk-vcodec driver produces a number of warnings in an
ARM allmodconfig build, mainly since it assumes that dma_addr_t is
32-bit wide:
mtk-vcodec/venc/venc_vp8_if.c: In function 'vp8_enc_alloc_work_buf':
mtk-vcodec/venc/venc_vp8_if.c:212:191: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
mtk-vcodec/venc/venc_h264_if.c: In function 'h264_enc_alloc_work_buf':
mtk-vcodec/venc/venc_h264_if.c:297:190: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
This rearranges the format strings and type casts to what they should
have been in order to avoid the warnings. e0f80d8d62 ("[media]
mtk-vcodec: fix two compiler warnings") fixed some of the problems that
were introduced at the same time, but missed two others.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of hardcoding a timeout, let userspace change it dynamically
by adding a s_timeout ops.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The redrat3 sends an usb packet to the host either when the minimum pause
or the timeout occurs, so we can always add a trailing space in our
processing.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LIRC_SET_SEND_CARRIER should return 0 on success or -errno.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When s_tx_mask is given an invalid bitmask, the number of transmitters
should be returned. See the LIRC_SET_TRANSMITTER_MASK lirc ioctl
documentation.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The value 5 of the EEPROM_TS_MODE register (meaning dual tuner presence) is
only valid for AF9035 devices. For IT9135 devices it is invalid and led to a
false positive dual tuner mode detection with PCTV 79e.
Therefore on non-AF9035 devices and with value 5 the driver now defaults to
single tuner mode and outputs a regarding info message to log.
This fixes Bugzilla bug #118561.
Reported-by: Marc Duponcheel <marc@offline.be>
Signed-off-by: Stefan Pöschel <basic.master@gmx.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If a system configures the Nuvoton chip to use the alternative
EFM IO address (CR_EFIR2) then after probing the primary EFM IO
address (CR_EFIR) this region is not released.
If a driver for another function of the Nuvoton Super I/O
chip uses the same probing mechanism then it will hang if
loaded after the nuvoton-cir driver.
This was reported for the nct6775 hwmon driver.
Fix this by properly releasing the region after probing CR_EFIR.
This regression was introduced with kernel 4.6 so cc it to stable.
Reported-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Cc: <stable@vger.kernel.org> # 4.6.x-
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The wait_event() call in dvb_unregister_frontend() waits synchronously
for other tasks to free a file descriptor, but it does that while
holding several mutexes. That alone is a bad idea, but if one user
process happens to keep a (defunct) file descriptor open indefinitely,
the kernel will correctly detect a hung task:
INFO: task kworker/0:1:314 blocked for more than 30 seconds.
Not tainted 4.7.0-rc1-hosting+ #50
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/0:1 D ffff88003daf7a50 0 314 2 0x00000000
Workqueue: usb_hub_wq hub_event
ffff88003daf7a50 0000000000000296 ffff88003daf7a30 ffff88003fc13f98
ffff88003dadce00 ffff88003daf8000 ffff88003e3fc010 ffff88003d48d4f8
ffff88003e3b5030 ffff88003e3f8898 ffff88003daf7a68 ffffffff810cf860
Call Trace:
[<ffffffff810cf860>] schedule+0x30/0x80
[<ffffffff812f88d3>] dvb_unregister_frontend+0x93/0xc0
[<ffffffff8107a000>] ? __wake_up_common+0x80/0x80
[<ffffffff813019c7>] dvb_usb_adapter_frontend_exit+0x37/0x70
[<ffffffff81300614>] dvb_usb_exit+0x34/0xb0
[<ffffffff81300d4a>] dvb_usb_device_exit+0x3a/0x50
[<ffffffff81302dc2>] pctv452e_usb_disconnect+0x52/0x60
[<ffffffff81295a07>] usb_unbind_interface+0x67/0x1e0
[<ffffffff810609f3>] ? __blocking_notifier_call_chain+0x53/0x70
[<ffffffff8127ba67>] __device_release_driver+0x77/0x110
[<ffffffff8127c2d3>] device_release_driver+0x23/0x30
[<ffffffff8127ab5d>] bus_remove_device+0x10d/0x150
[<ffffffff8127879b>] device_del+0x13b/0x260
[<ffffffff81299dea>] ? usb_remove_ep_devs+0x1a/0x30
[<ffffffff8129468e>] usb_disable_device+0x9e/0x1e0
[<ffffffff8128bb09>] usb_disconnect+0x89/0x260
[<ffffffff8128db8d>] hub_event+0x30d/0xfc0
[<ffffffff81059475>] process_one_work+0x1c5/0x4a0
[<ffffffff8105940c>] ? process_one_work+0x15c/0x4a0
[<ffffffff81059799>] worker_thread+0x49/0x480
[<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
[<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
[<ffffffff8105f65e>] kthread+0xee/0x110
[<ffffffff810400bf>] ret_from_fork+0x1f/0x40
[<ffffffff8105f570>] ? __kthread_unpark+0x70/0x70
5 locks held by kworker/0:1/314:
#0: ("usb_hub_wq"){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
#1: ((&hub->events)){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
#2: (&dev->mutex){......}, at: [<ffffffff8128d8cb>] hub_event+0x4b/0xfc0
#3: (&dev->mutex){......}, at: [<ffffffff8128bad2>] usb_disconnect+0x52/0x260
#4: (&dev->mutex){......}, at: [<ffffffff8127c2cb>] device_release_driver+0x1b/0x30
This patch removes the blocking wait, and postpones the kfree() call
until all file handles have been closed by using struct kref.
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The LIRC_CAN_REC() returns a boolean "flag & LIRC_CAN_REC_MASK"
to check whether the device can receive data.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When opening or closing a lirc character device, the framework
provides to the user the possibility to keep track of opening or
closing of the device by calling two functions:
- set_use_inc() when opening the device
- set_use_dec() when closing the device
if those are not set by the lirc user, the system segfaults.
Check the pointer value before calling the above functions.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If ioctl is called, it cannot be a case of invalid system call
number (ENOSYS), that is a ENOTTY case which means that the
device doesn't support that specific ioctl command.
So, replace ENOSYS with ENOTTY.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When comparing a variable with a constant, the comparison should
start from the variable and not from the constant. It's also
written in the human DNA.
Swap the terms of comparisons whenever the constant comes first
and fix the following checkpatch warning:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The three if statements check the same thing, merge them in only
one statement.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two if ... else which check the same thing in different
part of the code, they can be merged in a single check.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The whole function is inside an 'if' statement
("if (ir->d.add_to_buf)").
Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The code can be rearranged so that some goto paths can be removed
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch mutes also all the checkpatch warnings related to
printk.
Reword all the printouts so that the string doesn't need to be
split, which fixes the following checkpatch warning:
WARNING: quoted string split across lines
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Transmitters don't necessarily need to have a FIFO managed buffer
for their transfers.
When registering the driver, before allocating the buffer, check
whether the device is a transmitter or receiver. Allocate the
buffer only for receivers.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
During the driver registration, move the buffer allocation on a
separate function.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The newly added FCP support in the vsp1 driver causes a link error
when CONFIG_RENESAS_FCP=m, since it's not reachable by built-in code:
drivers/media/built-in.o: In function `vsp1_remove':
:(.text+0xdeca0): undefined reference to `rcar_fcp_put'
drivers/media/built-in.o: In function `vsp1_probe':
:(.text+0xdef44): undefined reference to `rcar_fcp_get'
We already have a conditional dependency on FCP that requires
it for ARM64, so for all others we just have to prevent setting
RENESAS_VSP1=y when RENESAS_FCP=m by extending the FCP dependency.
Fixes: 94fcdf8297 ("[media] v4l: vsp1: Add FCP support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Building without CONFIG_PM results in a harmless warning from
slightly incorrect #ifdef guards:
drivers/media/platform/vsp1/vsp1_drv.c:525:12: error: 'vsp1_pm_runtime_resume' defined but not used [-Werror=unused-function]
drivers/media/platform/vsp1/vsp1_drv.c:516:12: error: 'vsp1_pm_runtime_suspend' defined but not used [-Werror=unused-function]
This removes the existing #ifdef and instead marks all four
PM functions as __maybe_unused.
Fixes: 1e6af546ee ("[media] v4l: vsp1: Implement runtime PM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* topic/vsp1: (36 commits)
[media] v4l: vsp1: wpf: Add flipping support
[media] v4l: vsp1: rwpf: Support runtime modification of controls
[media] v4l: vsp1: Simplify alpha propagation
[media] v4l: vsp1: clu: Support runtime modification of controls
[media] v4l: vsp1: lut: Support runtime modification of controls
[media] v4l: vsp1: Support runtime modification of controls
[media] v4l: vsp1: Add Cubic Look Up Table (CLU) support
[media] v4l: vsp1: lut: Expose configuration through a control
[media] v4l: vsp1: lut: Initialize the mutex
[media] v4l: vsp1: dl: Don't free fragments with interrupts disabled
[media] v4l: vsp1: Set entities functions
[media] v4l: vsp1: Don't create LIF entity when the userspace API is enabled
[media] v4l: vsp1: Don't register media device when userspace API is disabled
[media] v4l: vsp1: Base link creation on availability of entities
[media] media: Add video statistics computation functions
[media] media: Add video processing entity functions
[media] v4l: vsp1: sru: Fix intensity control ID
[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF
[media] v4l: vsp1: Constify operation structures
[media] v4l: vsp1: pipe: Fix typo in comment
...
Now that the frame rate can be properly set, this commit adds support
for S_PARM and G_PARM.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using two tables to estimate the temporal decimation
factor, use a formula. This allows to get the closest fps, which
sounds better than the current tables.
Also, the current code doesn't store the real framerate.
This patch fixes the above issues.
[Ezequiel:
- introduce a TW686X_MAX_FPS macro for max_fps.
- use hweight_long instead of open coding the set bits count.]
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
My static checker complains that if adap->props.num_frontends is 0 then
"ret" is uninitialized. I don't think that can happen. But "ret" is
always zero here so we can just remove the condition.
This extra check was added in commit 0d3ab8410d ('[media] dvb core:
must check dvb_create_media_graph()').
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the USB ID for Terratec Cinergy S2 Rev.3 (0ccd:0102).
Curiously dvb-usb-ids included already the USB ID for TERRATEC_CINERGY_S2_R3 even if the device was not supported.
Reported-by: Christian Knippel <namerp@googlemail.com>
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tuning a card with Sony ASCOT2E produces the following error:
kernel: i2c i2c-9: wr reg=0006: len=11 is too big!
MAX_WRITE_REGSIZE is defined as 10, buf[MAX_WRITE_REGSIZE + 1] buffer is
used in ascot2e_write_regs().
The problem is that exactly 10 bytes are written in ascot2e_set_params():
/* Set BW_OFFSET (0x0F) value from parameter table */
data[9] = ascot2e_sett[tv_system].bw_offset;
ascot2e_write_regs(priv, 0x06, data, 10);
The test in write_regs is as follows:
if (len + 1 >= sizeof(buf))
10 + 1 = 11 and that would be exactly the size of buf. Since 10 bytes +
buf[0] = reg would seem to fit into buf[], this shouldn't be an error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In case of error, the function devm_clk_get() returns ERR_PTR()
and not returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In case of error, the function devm_clk_get() returns ERR_PTR()
and not returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The DW2102 DVB-S/S2 driver uses the info() logging function from
dvb-usb.h. This function already appends a newline to the provided log
message, causing the dmesg output from DW2102 to include blank lines.
Fix this by removing the newline in the calls to info().
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We have assigned memory while requesting the firmware but if the sanity
check fails then we are not releasing the firmware.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
