The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:
https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/
This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.
Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f824
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.
Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
David Ward (5):
ASoC: rt286: Fix upper byte in DMIC2 configuration
ASoC: rt286: Configure combo jack for headphones
ASoC: rt298: Configure combo jack for headphones
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
ASoC: rt286: Generalize support for ALC3263 codec
sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
sound/soc/codecs/rt298.c | 9 +++++++--
2 files changed, 28 insertions(+), 15 deletions(-)
--
2.31.1
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-4-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
During jack detection, the combo jack is configured for a CTIA headset, and
then for an OMTP headset, while sensing the mic connection. If a mic is not
found in either case, the combo jack should be re-configured for headphones
only. This is consistent with the HDA driver behavior.
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-3-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
The ALSA control readback functionality only works for non-volatile
controls, i.e. control values that does not change on their own without
driver interaction.
This doesn't work for readbacks since the DSP firmware updates the
control value. Disable the cache mechanism in the driver if the control
name matches the prefix used for readbacks to ensure that the control
value is valid.
Signed-off-by: Niklas Carlsson <niklasc@axis.com>
Link: https://lore.kernel.org/r/20210419144901.9441-1-Niklas.Carlsson@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This HDA verb sets the upper byte of the Configuration Default register, so
only an 8-bit value should be used. For the rt298, the same fix was applied
in commit f8f2dc4a71 ("ASoC: rt298: fix wrong setting of gpio2_en").
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-2-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
(pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST));
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/lpass-rx-macro.c:1626:9: warning: Identical condition
and return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/lpass-rx-macro.c:1623:6: note: If condition 'ret' is
true, the function will return/exit
if (ret)
^
sound/soc/codecs/lpass-rx-macro.c:1626:9: note: Returning identical
expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-core.c:2784:6: style: Condition '!num_routes' is always
false [knownConditionTrueFalse]
if (!num_routes) {
^
sound/soc/soc-core.c:2777:17: note: Assuming that condition
'num_routes<0' is not redundant
if (num_routes < 0 || num_routes & 1) {
^
sound/soc/soc-core.c:2783:2: note: Compound assignment '/=', assigned
value is 0
num_routes /= 2;
^
sound/soc/soc-core.c:2784:6: note: Condition '!num_routes' is always
false
if (!num_routes) {
^
The documentation for of_property_count_string reads
"
* Returns the number of strings on
* success, -EINVAL if the property does not exist, -ENODATA if property
* does not have a value, and -EILSEQ if the string is not null-terminated
* within the length of the property data.
"
Since the case for num_routes == 0 is not possible, let's remove this
test.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 1)
requires 'unsigned int *' but the argument type is 'signed
int *'. [invalidScanfArgType_int]
} else if (sscanf(name, "%x-%x", &id1, &id2) == 2) {
^
sound/soc/soc-core.c:2237:13: warning: %x in format string (no. 2)
requires 'unsigned int *' but the argument type is 'signed
int *'. [invalidScanfArgType_int]
} else if (sscanf(name, "%x-%x", &id1, &id2) == 2) {
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
value that is never used. [unreadVariable]
acpi_status status = AE_OK;
^
sound/soc/soc-acpi.c:37:21: style: Variable 'status' is assigned a
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210416191144.27006-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add main capture switch and main capture volume control.
Main capture control has its own channel value respectivelly.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/dfd43a8db04e4d52a889d6f5c1262173@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Tegra186 and later, the number of links can go up to 72, so bump the
maximum number of links to the next power of two (128).
Fixes: f2138aed23 ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210416071147.2149109-2-thierry.reding@gmail.com
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAI counting code doesn't propagate errors when the number of
maximum links is exceeded, which causes subsequent initialization code
to continue to run and that eventually leads to memory corruption with
the code trying to access memory that is out of bounds.
Fix this by propagating errors when the maximum number of links is
reached, which ensures that the driver fails to load and prevents the
memory corruption.
Fixes: f2138aed23 ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210416071147.2149109-1-thierry.reding@gmail.com
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_params_symmetry() checks CPU / Codec symmetry.
Unfortunately there was bug on it (= A) which didn't check Codec.
But is back by (B).
A: v5.7: commit c840f7698d ("ASoC: soc-pcm: Merge for_each_rtd_cpu/codec_dais()")
B: v5.12: commit 3a90672111 ("ASoC: soc-pcm: cleanup soc_pcm_params_symmetry()")
In total,
old - v5.6 (= Generation-1):
symmetric_rate : DAI_Link / CPU / Codec
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
v5.7 - v5.11 (= Generation-2): (= because of bug by (A))
symmetric_rate : DAI_Link / CPU
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
v5.12 - (= Generation-3): (= back by (B))
symmetric_rate : DAI_Link / CPU / Codec
symmetric_channels : DAI_Link / CPU / Codec
symmetric_sample_bits : DAI_Link / CPU / Codec
OTOH, we can use DPCM which is configured by FE / BE.
Both FE / BE uses dummy-DAI.
FE: CPU <-> dummy-DAI
BE: dummy-DAI <-> Codec
One note is that we can use .be_hw_params_fixup in DPCM case.
This means BE settings might be fixuped/updated by FE.
This feature is used for example on MIXer case.
It can be happen not only for rate, but for channels/sample_bits too.
Because of these reasons, below issue happen on
Generation-1 / Generation-3, if...
1) Sound Card used DPCM
2) It exchanges rate to 48kHz by using .be_hw_params_fixup()
3) Codec had symmetric_rate = 1
I didn't confirm, but maybe same things happen
if it exchanged channels/sample_bits at Generation-1/2/3 too.
# aplay 44100.wav
# aplay 44100.wav
=> [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000
[kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22
[kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22
aplay: set_params:1407: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: 44100
PERIOD_TIME: (23219 23220)
PERIOD_SIZE: 1024
PERIOD_BYTES: 4096
PERIODS: 4
BUFFER_TIME: (92879 92880)
BUFFER_SIZE: 4096
BUFFER_BYTES: 16384
TICK_TIME: 0
soc_pcm_params_symmetry() checks by below
if (symmetry)
for_each_rtd_cpu_dais(rtd, i, cpu_dai)
if (cpu_dai->xxx && cpu_dai->xxx != d.xxx) {
dev_err(rtd->dev, "...");
return -EINVAL;
}
Because of above reason 3) (= Codec had symmetric_rate = 1)
BE can't ignore "if (symmetric)".
At 1st aplay, soc_pcm_params_symmetry() ignores it,
because dummy-DAI->rate is 0.
After this check, each DAI sets/keep settings.
In above sample case, BE gets 48000 and FE gets 44100,
and it happen BE -> FE order.
Because DPCM is sharing *same* dummy-DAI,
dummy-DAI sets as 48000 by BE, and is overwrote by 44100 by FE.
This settings never be cleaned (= a) after 1st aplay,
because dummy-DAI is used from FE/BE, never be last user (b).
static int soc_pcm_hw_clean(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
(b) if (snd_soc_dai_active(dai) == 1)
(a) soc_pcm_set_dai_params(dai, NULL);
...
}
...
}
At 2nd aplay, BE gets 48000 but dummy-DAI is keeping 44100,
soc_pcm_params_symmetry() checks will fail.
To solve this issue, this patch ignores dummy-DAI
at soc_pcm_params_symmetry()
Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2djxa2n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It indicates unmatched symmetry value, but not indicates on which DAI.
This patch indicates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rbbyono.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
__soc_pcm_params_symmetry() macro is using "name" as parameter
which will be exchanged to rate/channles/sample_bit, like below
dai->name => dai->rate
dai->name => dai->channels
dai->name => dai->sample_bit
But, dai itself has "name". This means
1) It is very confusable naming
2) It can't use dai->name
This patch use "xxx" instead of "name"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735vryoob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A DAI link has 3 components:
* CPU
* platform
* codec(s)
A component is specified via:
* name
* of_node
* dai_name
In order to avoid confusion when building a sound card we disallow
matching by both name and of_node (1).
soc_check_tplg_fes allows overriding certain BE links by overriding
BE link name. This doesn't work well if BE link was specified via DT,
because we end up with a link with both name and of_node specified
which is conflicting with (1).
In order to fix this we need to:
* override of_node if component was specified via DT
* override name, otherwise.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20210414101212.65573-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for jack detection, rt711 DAI and DMIC
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add one configuration with no RT711.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add configurations ported over from TGL.
The topology names need to include link information given all the
hardware permutations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recently, the sof_pcm_dai_link_fixup() function was
updated to match SSP config with the PCM hw_params
and set the current_config for the DAI widget.
But the sof_restore_pipelines() function still chooses the
default config for the DAI widget upon resuming. Fix this
to use the last used config when setting up the DAI widget
during resume.
Fixes: c943a586f6 ("ASoC: SOF: match SSP config with pcm hw params")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415162107.130963-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These patches adjusts to multi CPU/Codec on simple-card / audio-graph.
This is part of prepare for new audio-graph-card2.
Kuninori Morimoto (5):
ASoC: simple-card: remove unused variable from simple_parse_of()
ASoC: simple-card: use asoc_link_to_xxx() macro
ASoC: simple-card: use simple_props_to_xxx() macro
ASoC: audio-graph: use asoc_link_to_xxx() macro
ASoC: audio-graph: use simple_props_to_xxx() macro
sound/soc/generic/audio-graph-card.c | 43 +++++++++++++-----------
sound/soc/generic/simple-card.c | 50 +++++++++++++---------------
2 files changed, 47 insertions(+), 46 deletions(-)
--
2.25.1
We shouldn't use dai_props->cpus/codecs directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses simple_props_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0p5zs97.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_link->cpus/codecs/platforms directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses asoc_link_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lf9lzs9c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_props->cpus/codecs directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses simple_props_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtu1zs9i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't use dai_link->cpus/codecs/platforms directly,
because these are array now to supporting multi CPU/Codec/Platform.
This patch uses asoc_link_to_xxx() macro for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8ehzs9n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit d9ffff696c ("ASoC: simple-card: Use snd_soc_of_parse_aux_devs()")
switched to use snd_soc_of_parse_aux_devs() on simple_parse_of().
Thus noone is using *top anymore. Let's cleanup unused variable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmyxzs9w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are few instances of KUNIT tests that are not properly defined.
This commit focuses on correcting these issues to match the standard
defined in the Documentation.
Issues Fixed:
- tests should end in KUNIT_TEST, some fixes have been applied to
correct issues were KUNIT_TESTS is used or KUNIT is not mentioned.
- Tests should default to KUNIT_ALL_TESTS
- Tests configs tristate should have if !KUNIT_ALL_TESTS
No functional changes other than CONFIG name changes
Changes since v2:
- Split patch 1 by subcomponents
- fix issues where config was *KUNIT_TEST_TEST
- properly threaded/chained messages
Nico Pache (6):
kunit: ASoC: topology: adhear to KUNIT formatting standard
kunit: software node: adhear to KUNIT formatting standard
kunit: ext4: adhear to KUNIT formatting standard
kunit: lib: adhear to KUNIT formatting standard
kunit: mptcp: adhear to KUNIT formatting standard
m68k: update configs to match the proper KUNIT syntax
arch/m68k/configs/amiga_defconfig | 6 +++---
arch/m68k/configs/apollo_defconfig | 6 +++---
arch/m68k/configs/atari_defconfig | 6 +++---
arch/m68k/configs/bvme6000_defconfig | 6 +++---
arch/m68k/configs/hp300_defconfig | 6 +++---
arch/m68k/configs/mac_defconfig | 6 +++---
arch/m68k/configs/multi_defconfig | 6 +++---
arch/m68k/configs/mvme147_defconfig | 6 +++---
arch/m68k/configs/mvme16x_defconfig | 6 +++---
arch/m68k/configs/q40_defconfig | 6 +++---
arch/m68k/configs/sun3_defconfig | 6 +++---
arch/m68k/configs/sun3x_defconfig | 6 +++---
drivers/base/test/Kconfig | 2 +-
drivers/base/test/Makefile | 2 +-
fs/ext4/.kunitconfig | 2 +-
fs/ext4/Kconfig | 2 +-
fs/ext4/Makefile | 2 +-
lib/Kconfig.debug | 21 +++++++++++++--------
lib/Makefile | 6 +++---
net/mptcp/Kconfig | 2 +-
net/mptcp/Makefile | 2 +-
net/mptcp/crypto.c | 2 +-
net/mptcp/token.c | 2 +-
sound/soc/Kconfig | 2 +-
sound/soc/Makefile | 4 ++--
25 files changed, 64 insertions(+), 59 deletions(-)
--
2.30.2
Current ssi.c has duplicated code to control BUSIF
over/under run interrupt.
This patch adds new rsnd_ssi_busif_err_irq_enable/disable()
and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Yongbo Zhang <giraffesnn123@gmail.com>
Cc: Chen Li <licheng0822@thundersoft.com>
Link: https://lore.kernel.org/r/871rbl1jsb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ssi.c clears BUSIF error status at __rsnd_ssi_interrupt(),
but its code is verbose.
This patch off-load it to rsnd_ssi_busif_err_status_clear().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735w11jso.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 66c705d07d ("SoC: rsnd: add interrupt support for SSI BUSIF
buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status,
but is using "break" at for loop.
This means it is not checking all status. Let's check all BUSIF status.
Fixes: commit 66c705d07d ("SoC: rsnd: add interrupt support for SSI BUSIF buffer")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kgh1jsw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd needs to call .prepare (P) for clock settings,
.trigger for playback start (S) and stop (E).
It should be called as below from SSI point of view.
P -> S -> E -> P -> S -> E -> ...
But, if you used MIXer, below case might happen
(2)
1: P -> S ---> E -> ...
2: P ----> S -> ...
(1) (3)
P(1) setups clock, but E(2) resets it. and starts playback (3).
In such case, it will reports "SSI parent/child should use same rate".
rsnd_ssi_master_clk_start() which is the main function at (P)
was called from rsnd_ssi_init() (= S) before,
but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid
using clk_get_rate() which shouldn't be used under atomic context.
commit 4d230d1271 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic")
Because of above patch, rsnd_ssi_master_clk_start() is now called at (P)
which is for non atomic context. But (P) is assuming that spin lock is
*not* used.
One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx
which should be protected by spin lock.
After above patch, adg.c had below patch for other reasons.
commit 06e8f5c842 ("ASoC: rsnd: don't call clk_get_rate()
under atomic context")
clk_get_rate() is used at probe() timing by this patch.
In other words, rsnd_ssi_master_clk_start() is no longer using
clk_get_rate() any more.
This means we can call it from rsnd_ssi_init() (= S) again which is
protected by spin lock.
This patch re-move it to under spin lock, and solves
1. checking ssi->xxx without spin lock issue.
2. clk setting / device start / device stop race condition.
Reported-by: Linh Phung T. Y. <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z0x1jt5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
