WARNING: CPU: 1 PID: 11100 at fs/io_uring.c:9096
io_uring_flush+0x326/0x3a0 fs/io_uring.c:9096
RIP: 0010:io_uring_flush+0x326/0x3a0 fs/io_uring.c:9096
Call Trace:
filp_close+0xb4/0x170 fs/open.c:1280
close_files fs/file.c:401 [inline]
put_files_struct fs/file.c:416 [inline]
put_files_struct+0x1cc/0x350 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:433
do_exit+0xc22/0x2ae0 kernel/exit.c:820
do_group_exit+0x125/0x310 kernel/exit.c:922
get_signal+0x3e9/0x20a0 kernel/signal.c:2770
arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
An SQPOLL ring creator task may have gotten rid of its file note during
exit and called io_disable_sqo_submit(), but the io_uring is still left
referenced through fdtable, which will be put during close_files() and
cause a false positive warning.
First split the warning into two for more clarity when is hit, and the
add sqo_dead check to handle the described case.
Reported-by: syzbot+a32b546d58dde07875a1@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WARNING: CPU: 1 PID: 9094 at fs/io_uring.c:8884
io_disable_sqo_submit+0x106/0x130 fs/io_uring.c:8884
Call Trace:
io_uring_flush+0x28b/0x3a0 fs/io_uring.c:9099
filp_close+0xb4/0x170 fs/open.c:1280
close_fd+0x5c/0x80 fs/file.c:626
__do_sys_close fs/open.c:1299 [inline]
__se_sys_close fs/open.c:1297 [inline]
__x64_sys_close+0x2f/0xa0 fs/open.c:1297
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
io_uring's final close() may be triggered by any task not only the
creator. It's well handled by io_uring_flush() including SQPOLL case,
though a warning in io_disable_sqo_submit() will fallaciously fire by
moving this warning out to the only call site that matters.
Reported-by: syzbot+2f5d1785dc624932da78@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're freeing/finishing iopoll requests, ensure we check if the task
is in idling in terms of cancelation. Otherwise we could end up waiting
forever in __io_uring_task_cancel() if the task has active iopoll
requests that need cancelation.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=XL14
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"We still have a pending fix for a cancelation issue, but it's still
being investigated. In the meantime:
- Dead mm handling fix (Pavel)
- SQPOLL setup error handling (Pavel)
- Flush timeout sequence fix (Marcelo)
- Missing finish_wait() for one exit case"
* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
io_uring: flush timeouts that should already have expired
io_uring: do sqo disable on install_fd error
io_uring: fix null-deref in io_disable_sqo_submit
io_uring: don't take files/mm for a dead task
io_uring: drop mm and files after task_work_run
Turning a pinned page read-only breaks the pinning after COW. Don't do it.
The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turning page table entries read-only requires the mmap_sem held for
writing.
So stop doing the odd games with turning things from read locks to write
locks and back. Just get the write lock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we enter with requests pending and performm cancelations, we'll have
a different inflight count before and after calling prepare_to_wait().
This causes the loop to restart. If we actually ended up canceling
everything, or everything completed in-between, then we'll break out
of the loop without calling finish_wait() on the waitqueue. This can
trigger a warning on exit_signals(), as we leave the task state in
TASK_UNINTERRUPTIBLE.
Put a finish_wait() after the loop to catch that case.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* For the new fast_commit feature
* Fix some error handling codepaths in whiteout handling and
mountpoint sampling
* Fix how we write ext4_error information so it goes through the journal
when journalling is active, to avoid races that can lead to lost
error information, superblock checksum failures, or DIF/DIX features.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmAB8eMACgkQ8vlZVpUN
gaMUxAf+MW22dceTto2RO0ox9OEBNoZDFiVnlEuUaIOxkqOlovIWaqX7wwuF/121
+FaNeDVzqNSS/QjQSB5lHF5OfHCD2u1Ef/bGzCm9cQyeN2/n0sCsStfPCcyLHy/0
4R8PsjF0xhhbCETLcAc0U/YBFEoqSn1i7DG5nnpx63Wt1S/SSMmTAXzafWbzisEZ
XNsz3CEPCDDSmSzOt3qMMHxkSoOZhYcLe7fCoKkhZ2pvTyrQsHrne6NNLtxc+sDL
AcKkaI0EWFiFRhebowQO/5ouq6nnGKLCsukuZN9//Br8ht5gNcFpuKNVFl+LOiM6
ud4H3qcRokcdPPAn3uwI0AJKFXqLvg==
=Dgdj
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A number of bug fixes for ext4:
- Fix for the new fast_commit feature
- Fix some error handling codepaths in whiteout handling and
mountpoint sampling
- Fix how we write ext4_error information so it goes through the
journal when journalling is active, to avoid races that can lead to
lost error information, superblock checksum failures, or DIF/DIX
features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove expensive flush on fast commit
ext4: fix bug for rename with RENAME_WHITEOUT
ext4: fix wrong list_splice in ext4_fc_cleanup
ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR
ext4: don't leak old mountpoint samples
ext4: drop ext4_handle_dirty_super()
ext4: fix superblock checksum failure when setting password salt
ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super()
ext4: save error info to sb through journal if available
ext4: protect superblock modifications with a buffer lock
ext4: drop sync argument of ext4_commit_super()
ext4: combine ext4_handle_error() and save_error_info()
-----BEGIN PGP SIGNATURE-----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=7ueC
-----END PGP SIGNATURE-----
Merge tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two small cifs fixes for stable (including an important handle leak
fix) and three small cleanup patches"
* tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: style: replace one-element array with flexible-array
cifs: connect: style: Simplify bool comparison
fs: cifs: remove unneeded variable in smb3_fs_context_dup
cifs: fix interrupted close commands
cifs: check pointer before freeing
In the fast commit, it adds REQ_FUA and REQ_PREFLUSH on each fast
commit block when barrier is enabled. However, in recovery phase,
ext4 compares CRC value in the tail. So it is sufficient to add
REQ_FUA and REQ_PREFLUSH on the block that has tail.
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210106013242epcms2p5b6b4ed8ca86f29456fdf56aa580e74b4@epcms2p5
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got a "deleted inode referenced" warning cross our fsstress test. The
bug can be reproduced easily with following steps:
cd /dev/shm
mkdir test/
fallocate -l 128M img
mkfs.ext4 -b 1024 img
mount img test/
dd if=/dev/zero of=test/foo bs=1M count=128
mkdir test/dir/ && cd test/dir/
for ((i=0;i<1000;i++)); do touch file$i; done # consume all block
cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD,
/dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in
ext4_rename will return ENOSPC!!
cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1
We will get the output:
"ls: cannot access 'test/dir/file1': Structure needs cleaning"
and the dmesg show:
"EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls:
deleted inode referenced: 139"
ext4_rename will create a special inode for whiteout and use this 'ino'
to replace the source file's dir entry 'ino'. Once error happens
latter(the error above was the ENOSPC return from ext4_add_entry in
ext4_rename since all space has been consumed), the cleanup do drop the
nlink for whiteout, but forget to restore 'ino' with source file. This
will trigger the bug describle as above.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Fixes: cd808deced ("ext4: support RENAME_WHITEOUT")
Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After full/fast commit, entries in staging queue are promoted to main
queue. In ext4_fs_cleanup function, it splice to staging queue to
staging queue.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.
2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR.
and go to call iput properly.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Right now io_flush_timeouts() checks if the current number of events
is equal to ->timeout.target_seq, but this will miss some timeouts if
there have been more than 1 event added since the last time they were
flushed (possible in io_submit_flush_completions(), for example). Fix
it by recording the last sequence at which timeouts were flushed so
that the number of events seen can be compared to the number of events
needed without overflow.
Signed-off-by: Marcelo Diop-Gonzalez <marcelo827@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use "flexible array members"[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/
deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the following coccicheck warning:
./fs/cifs/connect.c:3740:6-21: WARNING: Comparison of 0/1 to bool
variable
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
'rc' in smb3_fs_context_dup is not used and can be removed.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Retry close command if it gets interrupted to not leak open handles on
the server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Duncan Findlay <duncf@duncf.ca>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes: 6988a619f5 ("cifs: allow syscalls to be restarted in __smb_send_rqst()")
Cc: stable@vger.kernel.org
Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
clang static analysis reports this problem
dfs_cache.c:591:2: warning: Argument to kfree() is a constant address
(18446744073709551614), which is not memory allocated by malloc()
kfree(vi);
^~~~~~~~~
In dfs_cache_del_vol() the volume info pointer 'vi' being freed
is the return of a call to find_vol(). The large constant address
is find_vol() returning an error.
Add an error check to dfs_cache_del_vol() similar to the one done
in dfs_cache_update_vol().
Fixes: 54be1f6c1c ("cifs: Add DFS cache routines")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
CC: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Steve French <stfrench@microsoft.com>
When lazytime is enabled and an inode is being written due to its
in-memory updated timestamps having expired, either due to a sync() or
syncfs() system call or due to dirtytime_expire_interval having elapsed,
the VFS needs to inform the filesystem so that the filesystem can copy
the inode's timestamps out to the on-disk data structures.
This is done by __writeback_single_inode() calling
mark_inode_dirty_sync(), which then calls ->dirty_inode(I_DIRTY_SYNC).
However, this occurs after __writeback_single_inode() has already
cleared the dirty flags from ->i_state. This causes two bugs:
- mark_inode_dirty_sync() redirties the inode, causing it to remain
dirty. This wastefully causes the inode to be written twice. But
more importantly, it breaks cases where sync_filesystem() is expected
to clean dirty inodes. This includes the FS_IOC_REMOVE_ENCRYPTION_KEY
ioctl (as reported at
https://lore.kernel.org/r/20200306004555.GB225345@gmail.com), as well
as possibly filesystem freezing (freeze_super()).
- Since ->i_state doesn't contain I_DIRTY_TIME when ->dirty_inode() is
called from __writeback_single_inode() for lazytime expiration,
xfs_fs_dirty_inode() ignores the notification. (XFS only cares about
lazytime expirations, and it assumes that i_state will contain
I_DIRTY_TIME during those.) Therefore, lazy timestamps aren't
persisted by sync(), syncfs(), or dirtytime_expire_interval on XFS.
Fix this by moving the call to mark_inode_dirty_sync() to earlier in
__writeback_single_inode(), before the dirty flags are cleared from
i_state. This makes filesystems be properly notified of the timestamp
expiration, and it avoids incorrectly redirtying the inode.
This fixes xfstest generic/580 (which tests
FS_IOC_REMOVE_ENCRYPTION_KEY) when run on ext4 or f2fs with lazytime
enabled. It also fixes the new lazytime xfstest I've proposed, which
reproduces the above-mentioned XFS bug
(https://lore.kernel.org/r/20210105005818.92978-1-ebiggers@kernel.org).
Alternatively, we could call ->dirty_inode(I_DIRTY_SYNC) directly. But
due to the introduction of I_SYNC_QUEUED, mark_inode_dirty_sync() is the
right thing to do because mark_inode_dirty_sync() now knows not to move
the inode to a writeback list if it is currently queued for sync.
Fixes: 0ae45f63d4 ("vfs: add support for a lazytime mount option")
Cc: stable@vger.kernel.org
Depends-on: 5afced3bf2 ("writeback: Avoid skipping inode writeback")
Link: https://lore.kernel.org/r/20210112190253.64307-2-ebiggers@kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
WARNING: CPU: 0 PID: 8494 at fs/io_uring.c:8717
io_ring_ctx_wait_and_kill+0x4f2/0x600 fs/io_uring.c:8717
Call Trace:
io_uring_release+0x3e/0x50 fs/io_uring.c:8759
__fput+0x283/0x920 fs/file_table.c:280
task_work_run+0xdd/0x190 kernel/task_work.c:140
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
exit_to_user_mode_prepare+0x249/0x250 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
failed io_uring_install_fd() is a special case, we don't do
io_ring_ctx_wait_and_kill() directly but defer it to fput, though still
need to io_disable_sqo_submit() before.
note: it doesn't fix any real problem, just a warning. That's because
sqring won't be available to the userspace in this case and so SQPOLL
won't submit anything.
Reported-by: syzbot+9c9c35374c0ecac06516@syzkaller.appspotmail.com
Fixes: d9d05217cb ("io_uring: stop SQPOLL submit on creator's death")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
general protection fault, probably for non-canonical address
0xdffffc0000000022: 0000 [#1] KASAN: null-ptr-deref
in range [0x0000000000000110-0x0000000000000117]
RIP: 0010:io_ring_set_wakeup_flag fs/io_uring.c:6929 [inline]
RIP: 0010:io_disable_sqo_submit+0xdb/0x130 fs/io_uring.c:8891
Call Trace:
io_uring_create fs/io_uring.c:9711 [inline]
io_uring_setup+0x12b1/0x38e0 fs/io_uring.c:9739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
io_disable_sqo_submit() might be called before user rings were
allocated, don't do io_ring_set_wakeup_flag() in those cases.
Reported-by: syzbot+ab412638aeb652ded540@syzkaller.appspotmail.com
Fixes: d9d05217cb ("io_uring: stop SQPOLL submit on creator's death")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Highlights include:
Bugfixes:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away.
-----BEGIN PGP SIGNATURE-----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=08H3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in
pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away"
* tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: nfs_igrab_and_active must first reference the superblock
NFS: nfs_delegation_find_inode_server must first reference the superblock
NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
pNFS: Stricter ordering of layoutget and layoutreturn
pNFS: Clean up pnfs_layoutreturn_free_lsegs()
pNFS: We want return-on-close to complete when evicting the inode
pNFS: Mark layout for return if return-on-close was not sent
net: sunrpc: interpret the return value of kstrtou32 correctly
NFS: Adjust fs_context error logging
NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
When an incremental send finds an extent that is shared, it checks which
file extent items in the range refer to that extent, and for those it
emits clone operations, while for others it emits regular write operations
to avoid corruption at the destination (as described and fixed by commit
d906d49fc5 ("Btrfs: send, fix file corruption due to incorrect cloning
operations")).
However when the root we are cloning from is the send root, we are cloning
from the inode currently being processed and the source file range has
several extent items that partially point to the desired extent, with an
offset smaller than the offset in the file extent item for the range we
want to clone into, it can cause the algorithm to issue a clone operation
that starts at the current eof of the file being processed in the receiver
side, in which case the receiver will fail, with EINVAL, when attempting
to execute the clone operation.
Example reproducer:
$ cat test-send-clone.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# Create our test file with a single and large extent (1M) and with
# different content for different file ranges that will be reflinked
# later.
xfs_io -f \
-c "pwrite -S 0xab 0 128K" \
-c "pwrite -S 0xcd 128K 128K" \
-c "pwrite -S 0xef 256K 256K" \
-c "pwrite -S 0x1a 512K 512K" \
$MNT/foobar
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send -f /tmp/snap1.send $MNT/snap1
# Now do a series of changes to our file such that we end up with
# different parts of the extent reflinked into different file offsets
# and we overwrite a large part of the extent too, so no file extent
# items refer to that part that was overwritten. This used to confuse
# the algorithm used by the kernel to figure out which file ranges to
# clone, making it attempt to clone from a source range starting at
# the current eof of the file, resulting in the receiver to fail since
# it is an invalid clone operation.
#
xfs_io -c "reflink $MNT/foobar 64K 1M 960K" \
-c "reflink $MNT/foobar 0K 512K 256K" \
-c "reflink $MNT/foobar 512K 128K 256K" \
-c "pwrite -S 0x73 384K 640K" \
$MNT/foobar
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2
echo -e "\nFile digest in the original filesystem:"
md5sum $MNT/snap2/foobar
# Now unmount the filesystem, create a new one, mount it and try to
# apply both send streams to recreate both snapshots.
umount $DEV
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
btrfs receive -f /tmp/snap1.send $MNT
btrfs receive -f /tmp/snap2.send $MNT
# Must match what we got in the original filesystem of course.
echo -e "\nFile digest in the new filesystem:"
md5sum $MNT/snap2/foobar
umount $MNT
When running the reproducer, the incremental send operation fails due to
an invalid clone operation:
$ ./test-send-clone.sh
wrote 131072/131072 bytes at offset 0
128 KiB, 32 ops; 0.0015 sec (80.906 MiB/sec and 20711.9741 ops/sec)
wrote 131072/131072 bytes at offset 131072
128 KiB, 32 ops; 0.0013 sec (90.514 MiB/sec and 23171.6148 ops/sec)
wrote 262144/262144 bytes at offset 262144
256 KiB, 64 ops; 0.0025 sec (98.270 MiB/sec and 25157.2327 ops/sec)
wrote 524288/524288 bytes at offset 524288
512 KiB, 128 ops; 0.0052 sec (95.730 MiB/sec and 24506.9883 ops/sec)
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
linked 983040/983040 bytes at offset 1048576
960 KiB, 1 ops; 0.0006 sec (1.419 GiB/sec and 1550.3876 ops/sec)
linked 262144/262144 bytes at offset 524288
256 KiB, 1 ops; 0.0020 sec (120.192 MiB/sec and 480.7692 ops/sec)
linked 262144/262144 bytes at offset 131072
256 KiB, 1 ops; 0.0018 sec (133.833 MiB/sec and 535.3319 ops/sec)
wrote 655360/655360 bytes at offset 393216
640 KiB, 160 ops; 0.0093 sec (66.781 MiB/sec and 17095.8436 ops/sec)
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
File digest in the original filesystem:
9c13c61cb0b9f5abf45344375cb04dfa /mnt/sdi/snap2/foobar
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to foobar: Invalid argument
File digest in the new filesystem:
132f0396da8f48d2e667196bff882cfc /mnt/sdi/snap2/foobar
The clone operation is invalid because its source range starts at the
current eof of the file in the receiver, causing the receiver to get
an EINVAL error from the clone operation when attempting it.
For the example above, what happens is the following:
1) When processing the extent at file offset 1M, the algorithm checks that
the extent is shared and can be (fully or partially) found at file
offset 0.
At this point the file has a size (and eof) of 1M at the receiver;
2) It finds that our extent item at file offset 1M has a data offset of
64K and, since the file extent item at file offset 0 has a data offset
of 0, it issues a clone operation, from the same file and root, that
has a source range offset of 64K, destination offset of 1M and a length
of 64K, since the extent item at file offset 0 refers only to the first
128K of the shared extent.
After this clone operation, the file size (and eof) at the receiver is
increased from 1M to 1088K (1M + 64K);
3) Now there's still 896K (960K - 64K) of data left to clone or write, so
it checks for the next file extent item, which starts at file offset
128K. This file extent item has a data offset of 0 and a length of
256K, so a clone operation with a source range offset of 256K, a
destination offset of 1088K (1M + 64K) and length of 128K is issued.
After this operation the file size (and eof) at the receiver increases
from 1088K to 1216K (1088K + 128K);
4) Now there's still 768K (896K - 128K) of data left to clone or write, so
it checks for the next file extent item, located at file offset 384K.
This file extent item points to a different extent, not the one we want
to clone, with a length of 640K. So we issue a write operation into the
file range 1216K (1088K + 128K, end of the last clone operation), with
a length of 640K and with a data matching the one we can find for that
range in send root.
After this operation, the file size (and eof) at the receiver increases
from 1216K to 1856K (1216K + 640K);
5) Now there's still 128K (768K - 640K) of data left to clone or write, so
we look into the file extent item, which is for file offset 1M and it
points to the extent we want to clone, with a data offset of 64K and a
length of 960K.
However this matches the file offset we started with, the start of the
range to clone into. So we can't for sure find any file extent item
from here onwards with the rest of the data we want to clone, yet we
proceed and since the file extent item points to the shared extent,
with a data offset of 64K, we issue a clone operation with a source
range starting at file offset 1856K, which matches the file extent
item's offset, 1M, plus the amount of data cloned and written so far,
which is 64K (step 2) + 128K (step 3) + 640K (step 4). This clone
operation is invalid since the source range offset matches the current
eof of the file in the receiver. We should have stopped looking for
extents to clone at this point and instead fallback to write, which
would simply the contain the data in the file range from 1856K to
1856K + 128K.
So fix this by stopping the loop that looks for file ranges to clone at
clone_range() when we reach the current eof of the file being processed,
if we are cloning from the same file and using the send root as the clone
root. This ensures any data not yet cloned will be sent to the receiver
through a write operation.
A test case for fstests will follow soon.
Reported-by: Massimo B. <massimo.b@gmx.net>
Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685.camel@gmx.net/
Fixes: 11f2069c11 ("Btrfs: send, allow clone operations within the same file")
CC: stable@vger.kernel.org # 5.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode number cache has been removed in this dev cycle, there's one
more leftover. We don't need to run the delayed refs again after
commit_fs_roots as stated in the comment, because btrfs_save_ino_cache
is no more since 5297199a8b ("btrfs: remove inode number cache
feature").
Nothing else between commit_fs_roots and btrfs_qgroup_account_extents
could create new delayed refs so the qgroup consistency should be safe.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If you export a subdirectory of a filesystem, a READDIRPLUS on the root
of that export will return the filehandle of the parent with the ".."
entry.
The filehandle is optional, so let's just not return the filehandle for
".." if we're at the root of an export.
Note that once the client learns one filehandle outside of the export,
they can trivially access the rest of the export using further lookups.
However, it is also not very difficult to guess filehandles outside of
the export. So exporting a subdirectory of a filesystem should
considered equivalent to providing access to the entire filesystem. To
avoid confusion, we recommend only exporting entire filesystems.
Reported-by: Youjipeng <wangzhibei1999@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In rare cases a task may be exiting while io_ring_exit_work() trying to
cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm()
because of SQPOLL check, but is not for __io_sq_thread_acquire_files().
Play safe and fail for both of them.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_req_task_submit() run by task_work can set mm and files, but
io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm()
and __io_sq_thread_acquire_files() do a simple current->mm/files check
it may end up submitting IO with mm/files of another task.
We also need to drop it after in the end to drop potentially grabbed
references to them.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: ea7c38fef0 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.
Fixes: e39d8a186e ("NFSv4: Fix an Oops during delegation callbacks")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-----BEGIN PGP SIGNATURE-----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=CClj
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
-----BEGIN PGP SIGNATURE-----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=+yAt
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit larger than I had hoped at this point, but it's all changes that
will be directed towards stable anyway. In detail:
- Fix a merge window regression on error return (Matthew)
- Remove useless variable declaration/assignment (Ye Bin)
- IOPOLL fixes (Pavel)
- Exit and cancelation fixes (Pavel)
- fasync lockdep complaint fix (Pavel)
- Ensure SQPOLL is synchronized with creator life time (Pavel)"
* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
io_uring: stop SQPOLL submit on creator's death
io_uring: add warn_once for io_uring_flush()
io_uring: inline io_uring_attempt_task_drop()
io_uring: io_rw_reissue lockdep annotations
io_uring: synchronise ev_posted() with waitqueues
io_uring: dont kill fasync under completion_lock
io_uring: trigger eventfd for IOPOLL
io_uring: Fix return value from alloc_fixed_file_ref_node
io_uring: Delete useless variable ‘id’ in io_prep_async_work
io_uring: cancel more aggressively in exit_work
io_uring: drop file refs after task cancel
io_uring: patch up IOPOLL overflow_flush sync
io_uring: synchronise IOPOLL on task_submit fail
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page() where
a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and not
the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper MTRR
type, when the end address is the same as top of memory. (Ying-Tsun
Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)
-----BEGIN PGP SIGNATURE-----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=2/Eq
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As expected, fixes started trickling in after the holidays so here is
the accumulated pile of x86 fixes for 5.11:
- A fix for fanotify_mark() missing the conversion of x86_32 native
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page()
where a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and
not the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper
MTRR type, when the end address is the same as top of memory.
(Ying-Tsun Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)"
* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't move a task to the same resource group
x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
x86/mtrr: Correct the range check before performing MTRR type lookups
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
x86/mm: Fix leak of pmd ptlock
fanotify: Fix sys_fanotify_mark() on native x86-32
If we exit _lgopen_prepare_attached() without setting a layout, we will
currently leak the plh_outstanding counter.
Fixes: 411ae722d1 ("pNFS: Wait for stale layoutget calls to complete in pnfs_update_layout()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We must ensure that we pass a layout segment to nfs_retry_commit() when
we're cleaning up after pnfs_bucket_alloc_ds_commits(). Otherwise,
requests that should be committed to the DS will get committed to the
MDS.
Do so by ensuring that pnfs_bucket_get_committing() always tries to
return a layout segment when it returns a non-empty page list.
Fixes: c84bea5944 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In pnfs_generic_clear_request_commit(), we try calling
pnfs_free_bucket_lseg() before we remove the request from the DS bucket.
That will always fail, since the point is to test for whether or not
that bucket is empty.
Fixes: c84bea5944 ("NFS/pNFS: Simplify bucket layout segment reference counting")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a layout return is in progress, we should wait for it to complete,
in case the layout segment we are picking up gets returned too.
Fixes: 30cb3ee299 ("pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the inode is being evicted, it should be safe to run return-on-close,
so we should do it to ensure we don't inadvertently leak layout segments.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the layout return-on-close failed because the layoutreturn was never
sent, then we should mark the layout for return again.
Fixes: 9c47b18cf7 ("pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Several existing dprink()/dfprintk() calls were converted to use the new
mount API logging macros by commit ce8866f091 ("NFS: Attach
supplementary error information to fs_context"). If the fs_context was
not created using fsopen() then it will not have had a log buffer
allocated for it, and the new mount API logging macros will wind up
calling printk().
This can result in syslog messages being logged where previously there
were none... most notably "NFS4: Couldn't follow remote path", which can
happen if the client is auto-negotiating a protocol version with an NFS
server that doesn't support the higher v4.x versions.
Convert the nfs_errorf(), nfs_invalf(), and nfs_warnf() macros to check
for the existence of the fs_context's log buffer and call dprintk() if
it doesn't exist. Add nfs_ferrorf(), nfs_finvalf(), and nfs_warnf(),
which do the same thing but take an NFS debug flag as an argument and
call dfprintk(). Finally, modify the "NFS4: Couldn't follow remote
path" message to use nfs_ferrorf().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207385
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: ce8866f091 ("NFS: Attach supplementary error information to fs_context.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When the creator of SQPOLL io_uring dies (i.e. sqo_task), we don't want
its internals like ->files and ->mm to be poked by the SQPOLL task, it
have never been nice and recently got racy. That can happen when the
owner undergoes destruction and SQPOLL tasks tries to submit new
requests in parallel, and so calls io_sq_thread_acquire*().
That patch halts SQPOLL submissions when sqo_task dies by introducing
sqo_dead flag. Once set, the SQPOLL task must not do any submission,
which is synchronised by uring_lock as well as the new flag.
The tricky part is to make sure that disabling always happens, that
means either the ring is discovered by creator's do_exit() -> cancel,
or if the final close() happens before it's done by the creator. The
last is guaranteed by the fact that for SQPOLL the creator task and only
it holds exactly one file note, so either it pins up to do_exit() or
removed by the creator on the final put in flush. (see comments in
uring_flush() around file->f_count == 2).
One more place that can trigger io_sq_thread_acquire_*() is
__io_req_task_submit(). Shoot off requests on sqo_dead there, even
though actually we don't need to. That's because cancellation of
sqo_task should wait for the request before going any further.
note 1: io_disable_sqo_submit() does io_ring_set_wakeup_flag() so the
caller would enter the ring to get an error, but it still doesn't
guarantee that the flag won't be cleared.
note 2: if final __userspace__ close happens not from the creator
task, the file note will pin the ring until the task dies.
Fixed: b1b6b5a30d ("kernel/io_uring: cancel io_uring before task works")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
files_cancel() should cancel all relevant requests and drop file notes,
so we should never have file notes after that, including on-exit fput
and flush. Add a WARN_ONCE to be sure.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We expect io_rw_reissue() to take place only during submission with
uring_lock held. Add a lockdep annotation to check that invariant.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A single patch from Arnd in this pull request to fix a missing
dependency in zonefs Kconfig.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCX/j4XAAKCRDdoc3SxdoY
dq7JAQDx1EafzD1RgEKoa0gKNZMBkNr08zaF1viEg9RoAu+KsAEApem43PmHfUQx
FSH9cSzkqbgcnusBsWv8pdCKS1R0iQs=
=Fd60
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single patch from Arnd to fix a missing dependency in zonefs
Kconfig"
* tag 'zonefs-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: select CONFIG_CRC32
The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit d55564cfc2
("x86: Make __put_user() generate an out-of-line call").
I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more. But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.
Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.
But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array. So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.
To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.
Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Laight <David.Laight@aculab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 38d715f494 ("btrfs: use btrfs_start_delalloc_roots in
shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing
some infrastructure we have in place to flush inodes that we use for
device replace and snapshot. However this introduced a pretty serious
performance regression. To reproduce the user untarred the source
tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would
see it take anywhere from 5 to 20 times as long to untar in 5.10
compared to 5.9. This was observed on fast devices (SSD and better) and
not on HDD.
The root cause is because before we would generally use the normal
writeback path to reclaim delalloc space, and for this we would provide
it with the number of pages we wanted to flush. The referenced commit
changed this to flush that many inodes, which drastically increased the
amount of space we were flushing in certain cases, which severely
affected performance.
We cannot revert this patch unfortunately because of 3d45f221ce
("btrfs: fix deadlock when cloning inline extent and low on free
metadata space") which requires the ability to skip flushing inodes that
are being cloned in certain scenarios, which means we need to keep using
our flushing infrastructure or risk re-introducing the deadlock.
Instead to fix this problem we can go back to providing
btrfs_start_delalloc_roots with a number of pages to flush, and then set
up a writeback_control and utilize sync_inode() to handle the flushing
for us. This gives us the same behavior we had prior to the fix, while
still allowing us to avoid the deadlock that was fixed by Filipe. I
redid the users original test and got the following results on one of
our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive)
5.9 0m54.258s
5.10 1m26.212s
5.10+patch 0m38.800s
5.10+patch is significantly faster than plain 5.9 because of my patch
series "Change data reservations to use the ticketing infra" which
contained the patch that introduced the regression, but generally
improved the overall ENOSPC flushing mechanisms.
Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm
the results:
5.10.5 4m00s
5.10.5+patch 1m08s
5.11-rc2 5m14s
5.11-rc2+patch 1m30s
Reported-by: René Rebe <rene@exactcode.de>
Fixes: 38d715f494 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc")
CC: stable@vger.kernel.org # 5.10
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add my test results ]
Signed-off-by: David Sterba <dsterba@suse.com>
bdev_evict_inode and bdev_free_inode are also called for the root inode
of bdevfs, for which bdev_alloc is never called. Move the zeroing o
f struct block_device and the initialization of the bd_bdi field into
bdev_alloc_inode to make sure they are initialized for the root inode
as well.
Fixes: e6cb53827e ("block: initialize struct block_device in bdev_alloc")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
freeze/thaw_bdev() currently use bdev->bd_fsfreeze_count to infer
whether or not bdev->bd_fsfreeze_sb is valid (it's valid iff
bd_fsfreeze_count is non-zero). thaw_bdev() doesn't nullify
bd_fsfreeze_sb.
But this means a freeze_bdev() call followed by a thaw_bdev() call can
leave bd_fsfreeze_sb with a non-null value, while bd_fsfreeze_count is
zero. If freeze_bdev() is called again, and this time
get_active_super() returns NULL (e.g. because the FS is unmounted),
we'll end up with bd_fsfreeze_count > 0, but bd_fsfreeze_sb is
*untouched* - it stays the same (now garbage) value. A subsequent
thaw_bdev() will decide that the bd_fsfreeze_sb value is legitimate
(since bd_fsfreeze_count > 0), and attempt to use it.
Fix this by always setting bd_fsfreeze_sb to NULL when
bd_fsfreeze_count is successfully decremented to 0 in thaw_sb().
Alternatively, we could set bd_fsfreeze_sb to whatever
get_active_super() returns in freeze_bdev() whenever bd_fsfreeze_count
is successfully incremented to 1 from 0 (which can be achieved cleanly
by moving the line currently setting bd_fsfreeze_sb to immediately
after the "sync:" label, but it might be a little too subtle/easily
overlooked in future).
This fixes the currently panicking xfstests generic/085.
Fixes: 040f04bd2e ("fs: simplify freeze_bdev/thaw_bdev")
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[BUG]
There are several bug reports about recent kernel unable to relocate
certain data block groups.
Sometimes the error just goes away, but there is one reporter who can
reproduce it reliably.
The dmesg would look like:
[438.260483] BTRFS info (device dm-10): balance: start -dvrange=34625344765952..34625344765953
[438.269018] BTRFS info (device dm-10): relocating block group 34625344765952 flags data|raid1
[450.439609] BTRFS info (device dm-10): found 167 extents, stage: move data extents
[463.501781] BTRFS info (device dm-10): balance: ended with status: -2
[CAUSE]
The ENOENT error is returned from the following call chain:
add_data_references()
|- delete_v1_space_cache();
|- if (!found)
return -ENOENT;
The variable @found is set to true if we find a data extent whose
disk bytenr matches parameter @data_bytes.
With extra debugging, the offending tree block looks like this:
leaf bytenr = 42676709441536, data_bytenr = 34626327621632
ctime 1567904822.739884119 (2019-09-08 03:07:02)
mtime 0.0 (1970-01-01 01:00:00)
otime 0.0 (1970-01-01 01:00:00)
item 27 key (51933 EXTENT_DATA 0) itemoff 9854 itemsize 53
generation 1517381 type 2 (prealloc)
prealloc data disk byte 34626327621632 nr 262144 <<<
prealloc data offset 0 nr 262144
item 28 key (52262 ROOT_ITEM 0) itemoff 9415 itemsize 439
generation 2618893 root_dirid 256 bytenr 42677048360960 level 3 refs 1
lastsnap 2618893 byte_limit 0 bytes_used 5557338112 flags 0x0(none)
uuid d0d4361f-d231-6d40-8901-fe506e4b2b53
Although item 27 has disk bytenr 34626327621632, which matches the
data_bytenr, its type is prealloc, not reg.
This makes the existing code skip that item, and return ENOENT.
[FIX]
The code is modified in commit 19b546d7a1 ("btrfs: relocation: Use
btrfs_find_all_leafs to locate data extent parent tree leaves"), before
that commit, we use something like
"if (type == BTRFS_FILE_EXTENT_INLINE) continue;"
But in that offending commit, we use (type == BTRFS_FILE_EXTENT_REG),
ignoring BTRFS_FILE_EXTENT_PREALLOC.
Fix it by also checking BTRFS_FILE_EXTENT_PREALLOC.
Reported-by: Stéphane Lesimple <stephane_btrfs2@lesimple.fr>
Link: https://lore.kernel.org/linux-btrfs/505cabfa88575ed6dbe7cb922d8914fb@lesimple.fr
Fixes: 19b546d7a1 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves")
CC: stable@vger.kernel.org # 5.6+
Tested-By: Stéphane Lesimple <stephane_btrfs2@lesimple.fr>
Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some extent io trees are initialized with NULL private member (e.g.
btrfs_device::alloc_state and btrfs_fs_info::excluded_extents).
Dereference of a NULL tree->private as inode pointer will cause panic.
Pass tree->fs_info as it's known to be valid in all cases.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929
Fixes: 05912a3c04 ("btrfs: drop extent_io_ops::tree_fs_info callback")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're supposed to print the root_key.offset in btrfs_root_name in the
case of a reloc root, not the objectid. Fix this helper to take the key
so we have access to the offset when we need it.
Fixes: 457f1864b5 ("btrfs: pretty print leaked root name")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
waitqueue_active() needs smp_mb() to be in sync with waitqueues
modification, but we miss it in io_cqring_ev_posted*() apart from
cq_wait() case.
Take an smb_mb() out of wq_has_sleeper() making it waitqueue_active(),
and place it a few lines before, so it can synchronise other
waitqueue_active() as well.
The patch doesn't add any additional overhead, so even if there are
no problems currently, it's just safer to have it this way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CPU0 CPU1
---- ----
lock(&new->fa_lock);
local_irq_disable();
lock(&ctx->completion_lock);
lock(&new->fa_lock);
<Interrupt>
lock(&ctx->completion_lock);
*** DEADLOCK ***
Move kill_fasync() out of io_commit_cqring() to io_cqring_ev_posted(),
so it doesn't hold completion_lock while doing it. That saves from the
reported deadlock, and it's just nice to shorten the locking time and
untangle nested locks (compl_lock -> wq_head::lock).
Reported-by: syzbot+91ca3f25bd7f795f019c@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure io_iopoll_complete() tries to wake up eventfd, which currently
is skipped together with io_cqring_ev_posted() for non-SQPOLL IOPOLL.
Add an iopoll version of io_cqring_ev_posted(), duplicates a bit of
code, but they actually use different sets of wait queues may be for
better.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=jlQf
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that arrived before the end of the year:
- a bunch of fixes related to transaction handle lifetime wrt various
operations (umount, remount, qgroup scan, orphan cleanup)
- async discard scheduling fixes
- fix item size calculation when item keys collide for extend refs
(hardlinks)
- fix qgroup flushing from running transaction
- fix send, wrong file path when there is an inode with a pending
rmdir
- fix deadlock when cloning inline extent and low on free metadata
space"
* tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: run delayed iputs when remounting RO to avoid leaking them
btrfs: add assertion for empty list of transactions at late stage of umount
btrfs: fix race between RO remount and the cleaner task
btrfs: fix transaction leak and crash after cleaning up orphans on RO mount
btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
btrfs: merge critical sections of discard lock in workfn
btrfs: fix racy access to discard_ctl data
btrfs: fix async discard stall
btrfs: tests: initialize test inodes location
btrfs: send: fix wrong file path when there is an inode with a pending rmdir
btrfs: qgroup: don't try to wait flushing if we're already holding a transaction
btrfs: correctly calculate item size used when item key collision happens
btrfs: fix deadlock when cloning inline extent and low on free metadata space
It is only safe to call the tracepoint before rpc_put_task() because
'data' is freed inside nfs4_lock_release (rpc_release).
Fixes: 48c9579a1a ("Adding stateid information to tracepoints")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
alloc_fixed_file_ref_node() currently returns an ERR_PTR on failure.
io_sqe_files_unregister() expects it to return NULL and since it can only
return -ENOMEM, it makes more sense to change alloc_fixed_file_ref_node()
to behave that way.
Fixes: 1ffc54220c ("io_uring: fix io_sqe_files_unregister() hangs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=OQRI
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Two fixes.
The first is the fix for the strnlen() array limit check and the
second fixes the calculation of the number of dirent records used to
represent any particular filename length"
* tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix directory entry size calculation
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
Fix follow warning:
fs/io_uring.c:1523:22: warning: variable ‘id’ set but not used
[-Wunused-but-set-variable]
struct io_identity *id;
^~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While io_ring_exit_work() is running new requests of all sorts may be
issued, so it should do a bit more to cancel them, otherwise they may
just get stuck. e.g. in io-wq, in poll lists, etc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring fds marked O_CLOEXEC and we explicitly cancel all requests
before going through exec, so we don't want to leave task's file
references to not our anymore io_uring instances.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOPOLL skips completion locking but keeps it under uring_lock, thus
io_cqring_overflow_flush() and so io_cqring_events() need additional
locking with uring_lock in some cases for IOPOLL.
Remove __io_cqring_overflow_flush() from io_cqring_events(), introduce a
wrapper around flush doing needed synchronisation and call it by hand.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_task_submit() might be called for IOPOLL, do the fail path under
uring_lock to comply with IOPOLL synchronisation based solely on it.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unfortunately, there's userland code that used to rely upon these
checks being done before anything else to check for UMOUNT_NOFOLLOW
support. That broke in 41525f56e2 ("fs: refactor ksys_umount").
Separate those from the rest of checks and move them to ksys_umount();
unlike everything else in there, this can be sanely done there.
Reported-by: Sargun Dhillon <sargun@sargun.me>
Fixes: 41525f56e2 ("fs: refactor ksys_umount")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since a few years, kernel addresses are no longer included in oops
dumps, at least on x86. All we get is a symbol name with offset and
size.
This is a problem for ceph_connection_operations handlers, especially
con->ops->dispatch(). All three handlers have the same name and there
is little context to disambiguate between e.g. monitor and OSD clients
because almost everything is inlined. gdb sneakily stops at the first
matching symbol, so one has to resort to nm and addr2line.
Some of these are already prefixed with mon_, osd_ or mds_. Let's do
the same for all others.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
AFS has a structured layout in its directory contents (AFS dirs are
downloaded as files and parsed locally by the client for lookup/readdir).
The slots in the directory are defined by union afs_xdr_dirent. This,
however, only directly allows a name of a length that will fit into that
union. To support a longer name, the next 1-8 contiguous entries are
annexed to the first one and the name flows across these.
afs_dir_iterate_block() uses strnlen(), limited to the space to the end of
the page, to find out how long the name is. This worked fine until
6a39e62abb. With that commit, the compiler determines the size of the
array and asserts that the string fits inside that array. This is a
problem for AFS because we *expect* it to overflow one or more arrays.
A similar problem also occurs in afs_dir_scan_block() when a directory file
is being locally edited to avoid the need to redownload it. There strlen()
was being used safely because each page has the last byte set to 0 when the
file is downloaded and validated (in afs_dir_check_page()).
Fix this by changing the afs_xdr_dirent union name field to an
indeterminate-length array and dropping the overflow field.
(Note that whilst looking at this, I realised that the calculation of the
number of slots a dirent used is non-standard and not quite right, but I'll
address that in a separate patch.)
The issue can be triggered by something like:
touch /afs/example.com/thisisaveryveryverylongname
and it generates a report that looks like:
detected buffer overflow in strnlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
...
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
afs_dir_iterate_block+0x12b/0x35b
afs_dir_iterate+0x14e/0x1ce
afs_do_lookup+0x131/0x417
afs_lookup+0x24f/0x344
lookup_open.isra.0+0x1bb/0x27d
open_last_lookups+0x166/0x237
path_openat+0xe0/0x159
do_filp_open+0x48/0xa4
? kmem_cache_alloc+0xf5/0x16e
? __clear_close_on_exec+0x13/0x22
? _raw_spin_unlock+0xa/0xb
do_sys_openat2+0x72/0xde
do_sys_open+0x3b/0x58
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 6a39e62abb ("lib: string.h: detect intra-object overflow in fortified string functions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: Daniel Axtens <dja@axtens.net>
When CRC32 is disabled, zonefs cannot be linked:
ld: fs/zonefs/super.o: in function `zonefs_fill_super':
Add a Kconfig 'select' statement for it.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----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=OvP3
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-----BEGIN PGP SIGNATURE-----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=XYT5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes: 4e7b5671c6 ("block: remove i_bdev")
Fixes: 37c3fc9abb ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.
Cc: stable@vger.kernel.org # 5.10
Fixes: 1e6fa5216a ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On reconnect, cap and dentry releases are dropped and the fields
that follow must be reencoded into the freed space. Currently these
are timestamp and gid_list, but gid_list isn't reencoded. This
results in
failed to decode message of type 24 v4: End of buffer
errors on the MDS.
While at it, make a change to encode gid_list unconditionally,
without regard to what head/which version was used as a result
of checking whether CEPH_FEATURE_FS_BTIME is supported or not.
URL: https://tracker.ceph.com/issues/48618
Fixes: 4f1ddb1ea8 ("ceph: implement updated ceph_mds_request_head structure")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Commit
121b32a58a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.
[ bp: Fix typo in Kconfig help text. ]
Fixes: 121b32a58a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: Paweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com
Since commit 36e2c7421f ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.
Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d627c..b24c30c67863, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.
This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
-----BEGIN PGP SIGNATURE-----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=a5OE
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various bug fixes and cleanups for ext4; no new features this cycle"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
ext4: remove unnecessary wbc parameter from ext4_bio_write_page
ext4: avoid s_mb_prefetch to be zero in individual scenarios
ext4: defer saving error info from atomic context
ext4: simplify ext4 error translation
ext4: move functions in super.c
ext4: make ext4_abort() use __ext4_error()
ext4: standardize error message in ext4_protect_reserved_inode()
ext4: remove redundant sb checksum recomputation
ext4: don't remount read-only with errors=continue on reboot
ext4: fix deadlock with fs freezing and EA inodes
jbd2: add a helper to find out number of fast commit blocks
ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h
ext4: fix fall-through warnings for Clang
ext4: add docs about fast commit idempotence
ext4: remove the unused EXT4_CURRENT_REV macro
ext4: fix an IS_ERR() vs NULL check
ext4: check for invalid block size early when mounting a file system
ext4: fix a memory leak of ext4_free_data
ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()
ext4: update ext4_data_block_valid related comments
...
-----BEGIN PGP SIGNATURE-----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=L6yP
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"All straight fixes, or a prep patch for a fix, either bound for stable
or fixing issues from this merge window. In particular:
- Fix new shutdown op not breaking links on failure
- Hold mm->mmap_sem for mm->locked_vm manipulation
- Various cancelation fixes (me, Pavel)
- Fix error path potential double ctx free (Pavel)
- IOPOLL fixes (Xiaoguang)"
* tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()
io_uring: fix double io_uring free
io_uring: fix ignoring xa_store errors
io_uring: end waiting before task cancel attempts
io_uring: always progress task_work on task cancel
io-wq: kill now unused io_wq_cancel_all()
io_uring: make ctx cancel on exit targeted to actual ctx
io_uring: fix 0-iov read buffer select
io_uring: close a small race gap for files cancel
io_uring: fix io_wqe->work_list corruption
io_uring: limit {io|sq}poll submit locking scope
io_uring: inline io_cqring_mark_overflow()
io_uring: consolidate CQ nr events calculation
io_uring: remove racy overflow list fast checks
io_uring: cancel reqs shouldn't kill overflow list
io_uring: hold mmap_sem for mm->locked_vm manipulation
io_uring: break links on shutdown failure
-----BEGIN PGP SIGNATURE-----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=Q42d
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few stragglers in here, but mostly just straight fixes. In
particular:
- Set of rnbd fixes for issues around changes for the merge window
(Gioh, Jack, Md Haris Iqbal)
- iocost tracepoint addition (Baolin)
- Copyright/maintainers update (Christoph)
- Remove old blk-mq fast path CPU warning (Daniel)
- loop max_part fix (Josh)
- Remote IPI threaded IRQ fix (Sebastian)
- dasd stable fixes (Stefan)
- bcache merge window fixup and style fixup (Yi, Zheng)"
* tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
md/bcache: convert comma to semicolon
bcache:remove a superfluous check in register_bcache
block: update some copyrights
block: remove a pointless self-reference in block_dev.c
MAINTAINERS: add fs/block_dev.c to the block section
blk-mq: Don't complete on a remote CPU in force threaded mode
s390/dasd: fix list corruption of lcu list
s390/dasd: fix list corruption of pavgroup group list
s390/dasd: prevent inconsistent LCU device data
s390/dasd: fix hanging device offline processing
blk-iocost: Add iocg idle state tracepoint
nbd: Respect max_part for all partition scans
block/rnbd-clt: Does not request pdu to rtrs-clt
block/rnbd-clt: Dynamically allocate sglist for rnbd_iu
block/rnbd: Set write-back cache and fua same to the target device
block/rnbd: Fix typos
block/rnbd-srv: Protect dev session sysfs removal
block/rnbd-clt: Fix possible memleak
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy
blk-mq: Remove 'running from the wrong CPU' warning
io_iopoll_complete() does not hold completion_lock to complete polled io,
so in io_wq_submit_work(), we can not call io_req_complete() directly, to
complete polled io, otherwise there maybe concurrent access to cqring,
defer_list, etc, which is not safe. Commit dad1b1242f ("io_uring: always
let io_iopoll_complete() complete polled io") has fixed this issue, but
Pavel reported that IOPOLL apart from rw can do buf reg/unreg requests(
IORING_OP_PROVIDE_BUFFERS or IORING_OP_REMOVE_BUFFERS), so the fix is not
good.
Given that io_iopoll_complete() is always called under uring_lock, so here
for polled io, we can also get uring_lock to fix this issue.
Fixes: dad1b1242f ("io_uring: always let io_iopoll_complete() complete polled io")
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: don't deref 'req' after completing it']
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once we created a file for current context during setup, we should not
call io_ring_ctx_wait_and_kill() directly as it'll be done by fput(file)
Cc: stable@vger.kernel.org # 5.10
Reported-by: syzbot+c9937dfb2303a5f18640@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fix unused 'ret' for !CONFIG_UNIX]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the first file is opened, ext4 samples the mountpoint of the
filesystem in 64 bytes of the super block. It does so using
strlcpy(), this means that the remaining bytes in the super block
string buffer are untouched. If the mount point before had a longer
path than the current one, it can be reconstructed.
Consider the case where the fs was mounted to "/media/johnjdeveloper"
and later to "/". The super block buffer then contains
"/\x00edia/johnjdeveloper".
This case was seen in the wild and caused confusion how the name
of a developer ands up on the super block of a filesystem used
in production...
Fix this by using strncpy() instead of strlcpy(). The superblock
field is defined to be a fixed-size char array, and it is already
marked using __nonstring in fs/ext4/ext4.h. The consumer of the field
in e2fsprogs already assumes that in the case of a 64+ byte mount
path, that s_last_mounted will not be NUL terminated.
Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The wrapper is now useless since it does what
ext4_handle_dirty_metadata() does. Just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When setting password salt in the superblock, we forget to recompute the
superblock checksum so it will not match until the next superblock
modification which recomputes the checksum. Fix it.
CC: Michael Halcrow <mhalcrow@google.com>
Reported-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 9bd8212f98 ("ext4 crypto: add encryption policy and password salt support")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If journalling is still working at the moment we get to writing error
information to the superblock we cannot write directly to the superblock
as such write could race with journalled update of the superblock and
cause journal checksum failures, writing inconsistent information to the
journal or other problems. We cannot journal the superblock directly
from the error handling functions as we are running in uncertain context
and could deadlock so just punt journalled superblock update to a
workqueue.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Protect all superblock modifications (including checksum computation)
with a superblock buffer lock. That way we are sure computed checksum
matches current superblock contents (a mismatch could cause checksum
failures in nojournal mode or if an unjournalled superblock update races
with a journalled one). Also we avoid modifying superblock contents
while it is being written out (which can cause DIF/DIX failures if we
are running in nojournal mode).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Everybody passes 1 as sync argument of ext4_commit_super(). Just drop
it.
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_bio_write_page does not need wbc parameter, since its parameter
io contains the io_wbc field. The io::io_wbc is initialized by
ext4_io_submit_init which is called in ext4_writepages and
ext4_writepage functions prior to ext4_bio_write_page.
Therefor, when ext4_bio_write_page is called, wbc info
has already been included in io parameter.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
save_error_info() is always called together with ext4_handle_error().
Combine them into a single call and move unconditional bits out of
save_error_info() into ext4_handle_error().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201216101844.22917-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
