ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by
checkpatch script.
Fixes: 18ff0bcda6 ("ethtool: add interface to interact with Ethernet Power Equipment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240610083426.740660-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 023ab2a9b4 ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked,
ufshcd_pending_cmds() is called to check whether there are pending
transactions or not. And only if there are no pending transactions can we
proceed to kickstart the clock scaling sequence.
ufshcd_pending_cmds() traverses over all SCSI devices and calls
sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down
to three steps:
1. Calculate the nr outstanding bits set in the 'word' bitmap.
2. Calculate the nr outstanding bits set in the 'cleared' bitmap.
3. Subtract the result from step 1 by the result from step 2.
This can lead to a race condition as outlined below:
Assume there is one pending transaction in the request queue of one SCSI
device, say sda, and the budget token of this request is 0, the 'word' is
0x1 and the 'cleared' is 0x0.
1. When step 1 executes, it gets the result as 1.
2. Before step 2 executes, block layer tries to dispatch a new request to
sda. Since the SCSI layer is blocked, the request cannot pass through
SCSI but the block layer would do budget_get() and budget_put() to
sda's budget map regardless, so the 'word' has become 0x3 and 'cleared'
has become 0x2 (assume the new request got budget token 1).
3. When step 2 executes, it gets the result as 1.
4. When step 3 executes, it gets the result as 0, meaning there is no
pending transactions, which is wrong.
Thread A Thread B
ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests()
| |
sbitmap_weight(word) |
| scsi_mq_get_budget()
| |
| scsi_mq_put_budget()
| |
sbitmap_weight(cleared)
...
When this race condition happens, the clock scaling sequence is started
with transactions still in flight, leading to subsequent hibernate enter
failure, broken link, task abort and back to back error recovery.
Fix this race condition by quiescing the request queues before calling
ufshcd_pending_cmds() so that block layer won't touch the budget map when
ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer
blocking/unblocking to reduce redundancies and latencies.
Fixes: 8d077ede48 ("scsi: ufs: Optimize the command queueing code")
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1717754818-39863-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 1b22cfb141 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PA-RISC systems with PA8800 and PA8900 processors have had problems
with random segmentation faults for many years. Systems with earlier
processors are much more stable.
Systems with PA8800 and PA8900 processors have a large L2 cache which
needs per page flushing for decent performance when a large range is
flushed. The combined cache in these systems is also more sensitive to
non-equivalent aliases than the caches in earlier systems.
The majority of random segmentation faults that I have looked at
appear to be memory corruption in memory allocated using mmap and
malloc.
My first attempt at fixing the random faults didn't work. On
reviewing the cache code, I realized that there were two issues
which the existing code didn't handle correctly. Both relate
to cache move-in. Another issue is that the present bit in PTEs
is racy.
1) PA-RISC caches have a mind of their own and they can speculatively
load data and instructions for a page as long as there is a entry in
the TLB for the page which allows move-in. TLBs are local to each
CPU. Thus, the TLB entry for a page must be purged before flushing
the page. This is particularly important on SMP systems.
In some of the flush routines, the flush routine would be called
and then the TLB entry would be purged. This was because the flush
routine needed the TLB entry to do the flush.
2) My initial approach to trying the fix the random faults was to
try and use flush_cache_page_if_present for all flush operations.
This actually made things worse and led to a couple of hardware
lockups. It finally dawned on me that some lines weren't being
flushed because the pte check code was racy. This resulted in
random inequivalent mappings to physical pages.
The __flush_cache_page tmpalias flush sets up its own TLB entry
and it doesn't need the existing TLB entry. As long as we can find
the pte pointer for the vm page, we can get the pfn and physical
address of the page. We can also purge the TLB entry for the page
before doing the flush. Further, __flush_cache_page uses a special
TLB entry that inhibits cache move-in.
When switching page mappings, we need to ensure that lines are
removed from the cache. It is not sufficient to just flush the
lines to memory as they may come back.
This made it clear that we needed to implement all the required
flush operations using tmpalias routines. This includes flushes
for user and kernel pages.
After modifying the code to use tmpalias flushes, it became clear
that the random segmentation faults were not fully resolved. The
frequency of faults was worse on systems with a 64 MB L2 (PA8900)
and systems with more CPUs (rp4440).
The warning that I added to flush_cache_page_if_present to detect
pages that couldn't be flushed triggered frequently on some systems.
Helge and I looked at the pages that couldn't be flushed and found
that the PTE was either cleared or for a swap page. Ignoring pages
that were swapped out seemed okay but pages with cleared PTEs seemed
problematic.
I looked at routines related to pte_clear and noticed ptep_clear_flush.
The default implementation just flushes the TLB entry. However, it was
obvious that on parisc we need to flush the cache page as well. If
we don't flush the cache page, stale lines will be left in the cache
and cause random corruption. Once a PTE is cleared, there is no way
to find the physical address associated with the PTE and flush the
associated page at a later time.
I implemented an updated change with a parisc specific version of
ptep_clear_flush. It fixed the random data corruption on Helge's rp4440
and rp3440, as well as on my c8000.
At this point, I realized that I could restore the code where we only
flush in flush_cache_page_if_present if the page has been accessed.
However, for this, we also need to flush the cache when the accessed
bit is cleared in ptep_clear_flush_young to keep things synchronized.
The default implementation only flushes the TLB entry.
Other changes in this version are:
1) Implement parisc specific version of ptep_get. It's identical to
default but needed in arch/parisc/include/asm/pgtable.h.
2) Revise parisc implementation of ptep_test_and_clear_young to use
ptep_get (READ_ONCE).
3) Drop parisc implementation of ptep_get_and_clear. We can use default.
4) Revise flush_kernel_vmap_range and invalidate_kernel_vmap_range to
use full data cache flush.
5) Move flush_cache_vmap and flush_cache_vunmap to cache.c. Handle
VM_IOREMAP case in flush_cache_vmap.
At this time, I don't know whether it is better to always flush when
the PTE present bit is set or when both the accessed and present bits
are set. The later saves flushing pages that haven't been accessed,
but we need to flush in ptep_clear_flush_young. It also needs a page
table lookup to find the PTE pointer. The lpa instruction only needs
a page table lookup when the PTE entry isn't in the TLB.
We don't atomically handle setting and clearing the _PAGE_ACCESSED bit.
If we miss an update, we may miss a flush and the cache may get corrupted.
Whether the current code is effectively atomic depends on process control.
When CONFIG_FLUSH_PAGE_ACCESSED is set to zero, the page will eventually
be flushed when the PTE is cleared or in flush_cache_page_if_present. The
_PAGE_ACCESSED bit is not used, so the problem is avoided.
The flush method can be selected using the CONFIG_FLUSH_PAGE_ACCESSED
define in cache.c. The default is 0. I didn't see a large difference
in performance.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Helge Deller <deller@gmx.de>
When reworking the range checking for get_user(), the get_user_8() case
on 32-bit wasn't zeroing the high register. (The jump to bad_get_user_8
was accidentally dropped.) Restore the correct error handling
destination (and rename the jump to using the expected ".L" prefix).
While here, switch to using a named argument ("size") for the call
template ("%c4" to "%c[size]") as already used in the other call
templates in this file.
Found after moving the usercopy selftests to KUnit:
# usercopy_test_invalid: EXPECTATION FAILED at
lib/usercopy_kunit.c:278
Expected val_u64 == 0, but
val_u64 == -60129542144 (0xfffffff200000000)
Closes: https://lore.kernel.org/all/CABVgOSn=tb=Lj9SxHuT4_9MTjjKVxsq-ikdXC4kGHO4CfKVmGQ@mail.gmail.com
Fixes: b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
Reported-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/all/20240610210213.work.143-kees%40kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZmb/TwAKCRCRxhvAZXjc
om/QAQCaXBrLRBLS0lvpmGfyFhBC+N+hNLEw5bzA0Dkm39nCUQEAwaMCWYzzSLMK
SfRAqKYkfQKSSHIGOq63ThZWkuFIMgQ=
=Z5xj
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f1 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f1 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'ip6 dscp set $v' in an nftables outpute route chain has no effect.
While nftables does detect the dscp change and calls the reroute hook.
But ip6_route_me_harder never sets the dscp/flowlabel:
flowlabel/dsfield routing rules are ignored and no reroute takes place.
Thanks to Yi Chen for an excellent reproducer script that I used
to validate this change.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbb (netfilter: ipset: Add list flush to cancel_gc).
Fixes: 97f7cf1cd8 (netfilter: ipset: fix performance regression in swap operation)
Reported-by: Lion Ackermann <nnamrec@gmail.com>
Tested-by: Lion Ackermann <nnamrec@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace.
Fixes: a150d122b6 ("netfilter: nft_meta: add inner match support")
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since physical and virtual kernel address spaces are uncoupled
the kernel image is not mapped using large segment pages anymore,
which is a regression.
Put the kernel image at the same large segment page offset in
physical memory as in virtual memory. Such approach preserves
the existing number of bits of entropy used for randomization
of the kernel location in virtual memory when KASLR is on.
As result, the kernel is mapped using large segment pages.
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Do not allow creation of large pages against physical addresses,
which itself are not aligned on the correct boundary. Failure to
do so might lead to referencing wrong memory as result of the way
DAT works.
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set.
Fixes: ae1aadb1eb ("nouveau: don't fail driver load if no display hw present.")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607221032.25918-1-anarsoul@gmail.com
Due to timer wheel implementation, a timer will usually fire
after its schedule.
For instance, for HZ=1000, a timeout between 512ms and 4s
has a granularity of 64ms.
For this range of values, the extra delay could be up to 63ms.
For TCP, this means that tp->rcv_tstamp may be after
inet_csk(sk)->icsk_timeout whenever the timer interrupt
finally triggers, if one packet came during the extra delay.
We need to make sure tcp_rtx_probe0_timed_out() handles this case.
Fixes: e89688e3e9 ("net: tcp: fix unexcepted socket die when snd_wnd is 0")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Menglong Dong <imagedong@tencent.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240607125652.1472540-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: various fixes
The different patches here are some unrelated fixes for MPTCP:
- Patch 1 ensures 'snd_una' is initialised on connect in case of MPTCP
fallback to TCP followed by retransmissions before the processing of
any other incoming packets. A fix for v5.9+.
- Patch 2 makes sure the RmAddr MIB counter is incremented, and only
once per ID, upon the reception of a RM_ADDR. A fix for v5.10+.
- Patch 3 doesn't update 'add addr' related counters if the connect()
was not possible. A fix for v5.7+.
- Patch 4 updates the mailmap file to add Geliang's new email address.
====================
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-0-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like my other email addresses, map my new one to kernel.org
account too.
My new email address uses "last name, first name" format, which is
different from my other email addresses. This mailmap is also used
to indicate that it is actually the same person.
Suggested-by: Mat Martineau <martineau@kernel.org>
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-4-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is strictly related to commit fb7a0d3348 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <martineau@kernel.org>
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the noop_qdisc owner isn't initialized, then it will be 0,
so packets will erroneously be regarded as having been subject
to recursion as long as only CPU 0 queues them. For non-SMP,
that's all packets, of course. This causes a change in what's
reported to userspace, normally noop_qdisc would drop packets
silently, but with this change the syscall returns -ENOBUFS if
RECVERR is also set on the socket.
Fix this by initializing the owner field to -1, just like it
would be for dynamically allocated qdiscs by qdisc_alloc().
Fixes: 0f022d32c3 ("net/sched: Fix mirred deadlock on device recursion")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240607175340.786bfb938803.I493bf8422e36be4454c08880a8d3703cea8e421a@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the recent commit 5097cbcb38 ("sched/isolation: Prevent boot crash
when the boot CPU is nohz_full") the kernel no longer crashes, but there is
another problem.
In this case tick_setup_device() calls tick_take_do_timer_from_boot() to
update tick_do_timer_cpu and this triggers the WARN_ON_ONCE(irqs_disabled)
in smp_call_function_single().
Kill tick_take_do_timer_from_boot() and just use WRITE_ONCE(), the new
comment explains why this is safe (thanks Thomas!).
Fixes: 08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240528122019.GA28794@redhat.com
Link: https://lore.kernel.org/all/20240522151742.GA10400@redhat.com
This happens when the amdgpu_bo_release_notify running
before amdgpu_ttm_set_buffer_funcs_status set the buffer
funcs to enabled.
check the buffer funcs enablement before calling the fill
buffer memory.
v2:(Christian)
- Apply it only for GEM buffers and since GEM buffers are only
allocated/freed while the driver is loaded we never run into
the issue to clear with buffer funcs disabled.
v3:(Mario)
- drop the stable tag as this will presumably go into a
-fixes PR for 6.10
Log snip:
*ERROR* Trying to clear memory with ring turned off.
RIP: 0010:amdgpu_bo_release_notify+0x201/0x220 [amdgpu]
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Richard Gong <richard.gong@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610180401.9540-1-Arunpravin.PaneerSelvam@amd.com
The bucket_gens array and gc_buckets array known their own size; we
should be using those members, and returning an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck_err() does a goto fsck_err on error; factor out check_fix_ptr() so
that our error label can drop our device ref.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We count objects as freed when we move them to the srcu-pending lists
because we're doing the equivalent of a kfree_srcu(); the only
difference is managing the pending list ourself means we can allocate
from the pending list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since the key cache shrinker walks the rhashtable, a mostly empty
rhashtable leads to really nasty reclaim performance issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck.c always runs top of the stack so we're not too concerned here;
noinline_for_stack is sufficient
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
for forwards compat we now explicitly allow mounting and using
filesystems with unknown btrees, and we have to walk them for fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
error handling here is slightly odd, which is why we were accidently
calling evict() on an error pointer
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Split the workqueues for btree read completions and btree write
submissions; we don't want concurrency control on btree read
completions, but we do want concurrency control on write submissions,
else blocking in submit_bio() will cause a ton of kworkers to be
allocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The amp_id argument of l2cap_connect() was removed in
commit 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
It was always called with amp_id == 0, i.e. AMP_ID_BREDR == 0x00 (ie.
non-AMP controller). In the above commit, the code path for amp_id != 0
was preserved, although it should have used the amp_id == 0 one.
Restore the previous behavior of the non-AMP code path, to fix problems
with L2CAP connections.
Fixes: 84a4bb6548 ("Bluetooth: HCI: Remove HCI_AMP support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When setting up an advertisement the code shall always attempt to use
the handle set by the instance since it may not be equal to the instance
ID.
Fixes: e77f43d531 ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tariq Toukan says:
====================
geneve fixes
This small patchset by Gal provides bug fixes to the geneve tunnels flows.
Patch 1 fixes an incorrect value returned by the inner network header
offset helper.
Patch 2 fixes an issue inside the mlx5e tunneling flow. It 'happened' to
be harmless so far, before applying patch 1.
Series generated against:
commit d30d0e49da ("Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the vxlan_features_check() call to after we verified the packet is
a tunneled VXLAN packet.
Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might
wrongly not get offloaded.
In some cases, it worked by chance as GENEVE header is the same size as
VXLAN, but it is obviously incorrect.
Fixes: e3cfc7e6b7 ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70 ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Fixes: 1e264f9d29 ("net: dsa: qca8k: add LEDs basic support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
