Currently the PHY state is set according to the state of the PHYs after
reset. This is invalid as the PHYs are already re-initialized.
Set PHY state according to the state before the reset instead of after.
Link: https://lore.kernel.org/r/1601649038-25534-8-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently sas_resume_ha() is called while resuming the controller to wait
for all suspended PHYs to come up and all the libsas events to be
completed.
There is a scenario which will cause task hung: For direct attach with two
disks connected with two PHYs, disable phy0 before suspending the disk on
phy1 and the controller, then enable phy0 and resume the controller, and
task hung occurs as follows:
[ 591.901463] hisi_sas_v3_hw 0000:b4:02.0: resuming from operating state [D0]
[ 593.113525] hisi_sas_v3_hw 0000:b4:02.0: neither _PS0 nor _PR0 is defined
[ 593.120301] hisi_sas_v3_hw 0000:b4:02.0: waiting up to 25 seconds for 1 phy to resume
[ 593.120836] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[ 593.134680] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 link_rate=10(sata)
[ 593.134733] sas: phy-2:0 added to port-2:0, phy_mask:0x1 (5000000000000200)
[ 593.148350] sas: DOING DISCOVERY on port 0, pid:948
[ 593.153227] hisi_sas_v3_hw 0000:b4:02.0: dev[3:5] found
[ 593.159840] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 593.165663] sas: ata7: end_device-2:0: dev error handler
[ 593.165730] sas: ata2: end_device-2:1: dev error handler
[ 593.172532] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy0 phy_state=0x2
[ 593.182570] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy0 down
[ 593.331277] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[ 593.498956] ata7.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q, max UDMA/133
[ 593.506235] ata7.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32)
[ 593.514295] ata7.00: configured for UDMA/133
[ 593.518557] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 593.528613] sas: ata7: end_device-2:0: model:SAMSUNG MZ7LH960HAJR-00005
serial:S45NNA0M712225
[ 593.537520] device_link_add 316: dev=2:0:2:0 supplier:2 consumer:0
[ 593.543674] device_link_add 324
[ 593.546801] device_link_add 352
[ 593.549930] device_link_add 406
[ 593.553058] device_link_add 440: dev=2:0:2:0 supplier:2 consumer:0
[ 593.559208] device_link_add 444
[ 593.562335] device_link_add 455
[ 593.565517] scsi 2:0:2:0: Direct-Access ATA SAMSUNG MZ7LH960 404Q PQ: 0
ANSI: 5
[ 620.057464] phy-2:1: resume timeout
[ 738.841445] INFO: task kworker/u256:0:8 blocked for more than 120 seconds.
[ 738.848295] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744
[ 738.854361] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 738.862155] kworker/u256:0 D 0 8 2 0x00000028
[ 738.867626] Workqueue: 0000:b4:02.0_event_q sas_port_event_worker
[ 738.873693] Call trace:
[ 738.876133] __switch_to+0xf4/0x148
[ 738.879613] __schedule+0x270/0x5d8
[ 738.883091] schedule+0x78/0x110
[ 738.886307] schedule_timeout+0x1ac/0x280
[ 738.890299] wait_for_completion+0x94/0x138
[ 738.894472] flush_workqueue+0x114/0x438
[ 738.898377] sas_porte_bytes_dmaed+0x400/0x500
[ 738.902801] sas_port_event_worker+0x28/0x40
[ 738.907053] process_one_work+0x1e8/0x360
[ 738.911046] worker_thread+0x44/0x478
[ 738.914698] kthread+0x150/0x158
[ 738.917915] ret_from_fork+0x10/0x1c
[ 738.921534] INFO: task kworker/u256:1:948 blocked for more than 120 seconds.
[ 738.928550] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744
[ 738.934614] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 738.942408] kworker/u256:1 D 0 948 2 0x00000028
[ 738.947873] Workqueue: 0000:b4:02.0_disco_q sas_discover_domain
[ 738.953766] Call trace:
[ 738.956203] __switch_to+0xf4/0x148
[ 738.959678] __schedule+0x270/0x5d8
[ 738.963152] schedule+0x78/0x110
[ 738.966368] rpm_resume+0xcc/0x550
[ 738.969757] __pm_runtime_resume+0x3c/0x88
[ 738.973836] rpm_get_suppliers+0x50/0x148
[ 738.977829] __pm_runtime_set_status+0x124/0x2f0
[ 738.982427] scsi_sysfs_add_sdev+0x1a0/0x2a8
[ 738.986679] scsi_probe_and_add_lun+0x888/0xab0
[ 738.991190] __scsi_scan_target+0xec/0x520
[ 738.995268] scsi_scan_target+0x11c/0x128
[ 738.999261] sas_rphy_add+0x15c/0x1e8
[ 739.002907] sas_probe_devices+0xe4/0x150
[ 739.006899] sas_discover_domain+0x33c/0x588
[ 739.011150] process_one_work+0x1e8/0x360
[ 739.015143] worker_thread+0x44/0x478
[ 739.018789] kthread+0x150/0x158
[ 739.022003] ret_from_fork+0x10/0x1c
...
If an extra phy0 up happens during resume of the SAS controller, it will
emit a new libsas event (event PORTE_BYTES_DMAED and event
DISCE_DISCOVER_DOMAIN). We will call function scsi_sysfs_add_sdev() in
event DISCE_DISCOVER_DOMAIN, which will call __pm_runtime_set_status() to
resume supplier (host controller). For runtime PM core, if device is in the
resuming state, the later resume request of the device will wait for
previous resume request to complete synchronously. At that point in time
the state of the controller is still resuming as it waits for all libsas
events to be completed, while libsas event DISCE_DISCOVER_DOMAIN is blocked
as the state of the controller is resuming which causes a deadlock.
To avoid the issue, filter out new PHY up events while the controller is
suspended.
Link: https://lore.kernel.org/r/1601649038-25534-7-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Runtime PM of SCSI devices is already supported in SCSI layer, we can
suspend/resume every SCSI device separately. But if there is no link
between hisi_hba and SCSI devices or SCSI targets it will cause issues if
the controller is suspended while SCSI devices are still resuming. Only
when all the SCSI devices under the controller are suspended, the
controller can be suspended. Add the device link between SCSI devices
and the controller.
Link: https://lore.kernel.org/r/1601649038-25534-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To support system suspend/resume or runtime suspend/resume, need to use the
function pci_set_power_state() to change the power state which requires at
least method _PS0 or _PR0 be filled by platform for v3 hw. So check whether
the method is supported, if not, print a warning.
A Kconfig dependency is added as there is no stub for
acpi_device_power_manageable().
Link: https://lore.kernel.org/r/1601649038-25534-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For v3 hw we will add support for runtime PM which is only supported in new
framework. Legacy PM support and new framework are not allowed to be used
together. Switch to new framework to support suspend and resume.
Link: https://lore.kernel.org/r/1601649038-25534-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A call trace is observed when running function level reset with online CPUs
less than 16 and MSI auto-affinity enabled.
[16538.348038] Call trace:
[16538.348422] pci_irq_vector+0x98/0xc0
[16538.348947] disable_host_v3_hw+0x8c/0x288 [hisi_sas_v3_hw]
[16538.349706] hisi_sas_reset_prepare_v3_hw+0x60/0x88 [hisi_sas_v3_hw]
[16538.350631] pci_dev_save_and_disable+0x38/0x68
[16538.351290] pci_reset_function+0x44/0x88
[16538.351846] reset_store+0x6c/0xb8
[16538.352429] dev_attr_store+0x44/0x60
[16538.353035] sysfs_kf_write+0x58/0x80
[16538.353558] kernfs_fop_write+0x140/0x230
[16538.354175] __vfs_write+0x48/0x80
[16538.354675] vfs_write+0xb8/0x1d8
[16538.355145] ksys_write+0x74/0xf8
[16538.355615] __arm64_sys_write+0x24/0x30
[16538.356240] el0_svc_common.constprop.4+0x80/0x1f0
[16538.356905] do_el0_svc+0x2c/0x38
[16538.357408] el0_svc+0x14/0x40
[16538.357848] el0_sync_handler+0xbc/0x2ec
[16538.358388] el0_sync+0x140/0x180
The reason is that if we use pci_alloc_irq_vectors_affinity() to allocate
IRQs, the number of CQ IRQs can only be less than or equal to the number of
online CPUs, but we use hisi_hba->queue_count (always 16) to iterate during
interrupt_disable_v3_hw().
Use hisi_hba->cq_nvecs to replace hisi_hba->queue_count to avoid
synchronize IRQ on a CPU which does not exist.
Link: https://lore.kernel.org/r/1601649038-25534-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Through the new debugfs interface the user can select fixed code
patterns. Add two new interfaces fixed_code and fixed_code1.
Link: https://lore.kernel.org/r/1598958790-232272-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add BIST support for phy FFE (Feed forward equalizer) setting. The user can
configure FFE through the new debugfs interface.
FFE is a parameter used for link layer control. It will affect the link
quality between the SAS controller and the backplane. In the BIST test, the
FFE interface is provided to assist board testers in optimizing link
parameters.
The modification of the FFE parameter will affect the test after BIST or
the normal running of the board. The user should save the initial FFE
values and restore them after BIST test is complete.
Link: https://lore.kernel.org/r/1598958790-232272-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use "phy_id" to identify phy in the BIST code but the rest of code
always uses "phy_no". Change it for consistency.
Link: https://lore.kernel.org/r/1598958790-232272-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When updating PROG_PHY_LINK_RATE to set linkrate for a phy we used a
hard-coded initial value instead of getting the current value from the
register. The assumption was that this register would not be modified, but
in fact it was partially modified in a new version of hardware. The
hard-coded value we used changed the default value of the register to a an
incorrect setting and as a result the SAS controller could not change
linkrate for the phy.
Delete hard-coded value and always read the latest value of register before
updating it.
Link: https://lore.kernel.org/r/1598958790-232272-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that
is inaccurate. For clarification, include OOB in macro name.
Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hisi_sas_slot_task_free() attempts to dereference SSP task for non-ATA
tasks. If the task is SMP, the code may reference the wrong structure
although this may not cause any problems.
To avoid this, only access to SSP task when slot->n_elem_dif is not 0 which
indicates this is an SSP task.
Link: https://lore.kernel.org/r/1598958790-232272-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a
huge docbook fix update like most other subsystems and no major update
to the core (the few non trivial updates are either minor fixes or
removing an unused feature [scsi_sdb_cache]).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
4W/LDptarpTiDI3NuDc=
=4b0W
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
Abort failed commands in completion path. This avoids having to wait for
block layer timeouts and triggering the SCSI error handling thread.
Link: https://lore.kernel.org/r/1594627471-235395-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI
devices through libata. That also includes the SAS HBA drivers in addition
to native libata HBA drivers.
Link: https://lore.kernel.org/r/20200615064624.37317-3-hch@lst.de
Fixes: cc97923a5b ("block: move dma drain handling to scsi")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates. There are no major core changes in this
series apart from a refactoring in scsi_lib.c.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXtq5QyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXyGAQCipTWx
7kHKHZBCVTU133bADt3+SstLrAm8PKZEXMnP9wEAzu4QkkW8URxEDRrpu7qk5gbA
9M/KyqvfRtTH7+BSK7M=
=J6aO
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
Register SAS_RAS_INTR0 can help us to figure out which ECC error has
occurred. This register is helpful to identify RAS issue, so we add it to
the list of debugfs register name list for easier retrieval.
Link: https://lore.kernel.org/r/1589552025-165012-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We found out that after phy up, the hardware reports another oob interrupt
but did not follow a phy up interrupt:
oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout
We run link reset when wait phy up timeout, and it send a normal disk into
reset processing. So we made some circumvention action in the code, so that
this abnormal oob interrupt will not start the timer to wait for phy up.
Link: https://lore.kernel.org/r/1589552025-165012-2-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'proc_name' entry in sysfs for hisi_sas is 'null' now because it is not
initialized in scsi_host_template. It looks like:
[root@localhost ~]# cat /sys/class/scsi_host/host2/proc_name
(null)
While the other driver's entry looks like:
linux-vnMQMU:~ # cat /sys/class/scsi_host/host0/proc_name
megaraid_sas
Link: https://lore.kernel.org/r/20200512113258.30781-1-yanaijie@huawei.com
Cc: John Garry <john.garry@huawei.com>
Cc: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If SATA_HOST is n, build fails:
drivers/scsi/hisi_sas/hisi_sas_main.o: In function
`hisi_sas_fill_ata_reset_cmd': hisi_sas_main.c:(.text+0x2500): undefined
reference to `ata_tf_to_fis'
Select SATA_HOST to fix this.
Link: https://lore.kernel.org/r/20200402085812.32948-1-yuehaibing@huawei.com
Fixes: bd322af15c ("ata: make SATA_PMP option selectable only if any SATA host driver is enabled")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The print of pr_err() does not come with device information, so replace it
with dev_err(). Also improve the grammar in the message.
Link: https://lore.kernel.org/r/1583940144-230800-1-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The trigger_dump file is only used to manually trigger the dump, and did
not provide a read callback function for it, so its file permission
setting to 600 is wrong,and should be changed to 200.
Link: https://lore.kernel.org/r/1579522957-4393-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use magic number as offset and mask when handle channel interrupt, so
use macro to replace it.
Link: https://lore.kernel.org/r/1579522957-4393-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After changing tasklet to workqueue or threaded irq, some critical
resources are only used on threads (not in interrupt or bottom half of
interrupt), so replace spin_lock_irqsave/spin_unlock_restore with
spin_lock/spin_unlock to protect those critical resources.
Link: https://lore.kernel.org/r/1579522957-4393-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it
only allows a single target CPU in the affinity mask to process interrupts
and also interrupt thread, and the performance of using threaded irq is
almost the same as tasklet. But if the config is not enabled, the interrupt
thread will be allowed all the CPUs in the affinity mask. At that situation
it improves the performance (about 20%).
Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different
architecture chip, and it seems to be better to make it be configured
easily.
Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands
for SCSI devices, it is used by all libata drivers as well as a few
drivers that support SAS attached SATA drives.
The only command that is not safe for compat ioctls here is
HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall()
in order to do both cases correctly, and change all callers to use it
as both native and compat callback pointers, including the indirect
callers through sas_ioctl and ata_scsi_ioctl.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently we call function hisi_sas_debugfs_exit() to remove debugfs_dir
before freeing interrupt irqs and destroying workqueue in the driver remove
path.
If a dump is triggered before function hisi_sas_debugfs_exit() but
debugfs_work may be called after it, so it may refer to already removed
debugfs_dir which will cause NULL pointer dereference.
To avoid it, put function hisi_sas_debugfs_exit() after free_irqs and
destroy workqueue when removing hisi_sas driver.
Link: https://lore.kernel.org/r/1573551059-107873-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Need to return directly if init hardware failed.
Fixes: 73a4925d15 ("scsi: hisi_sas: Update all the registers after suspend and resume")
Link: https://lore.kernel.org/r/1573551059-107873-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The number of phy down reflects the quality of the link between SAS
controller and disk. In order to allow the user to confirm the link quality
of the system, we record the number of phy down for each phy.
The user can check the current phy down count by reading the debugfs file
corresponding to the specific phy, or clear the phy down count by writing 0
to the debugfs file.
Link: https://lore.kernel.org/r/1571926105-74636-19-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although if the debugfs initialization fails, we will delete the debugfs
folder of hisi_sas, but we did not consider the scenario where debugfs was
successfully initialized, but the probe failed for other reasons. We found
out that hisi_sas folder is still remain after the probe failed.
When probe fail, we should delete debugfs folder to avoid the above issue.
Link: https://lore.kernel.org/r/1571926105-74636-18-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use the module parameter debugfs_dump_count to manage the upper limit of
the memory block for multiple dumps.
Link: https://lore.kernel.org/r/1571926105-74636-17-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We add multiple dumps for debugfs, but only allocate memory this time and
only dump #0.
Link: https://lore.kernel.org/r/1571926105-74636-15-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address for
ITCT cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-14-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address for IOST
cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-13-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address for ITCT
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-12-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address for IOST
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-11-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address and phy
pointer for port at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.
Link: https://lore.kernel.org/r/1571926105-74636-10-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address and
hisi_hba pointer for REGS at debugfs. This structure is bound to the
corresponding debugfs file, it can help callback function of debugfs file
to get what it need.
Link: https://lore.kernel.org/r/1571926105-74636-9-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create a file structure which was used to save the memory address and DQ
pointer for DQ at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.
Link: https://lore.kernel.org/r/1571926105-74636-8-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
