During suspend, we see failures to suspend 1 in 300-500 suspends.
Looking closer, it appears that asynchronous RCU callbacks are being
queued as lazy even though synchronous callbacks are expedited. These
delays appear to not be very welcome by the suspend/resume code as
evidenced by these occasional suspend failures.
This commit modifies call_rcu() to check if rcu_async_should_hurry(),
which will return true if we are in suspend or in-kernel boot.
[ paulmck: Alphabetize local variables. ]
Ignoring the lazy hint makes the 3000 suspend/resume cycles pass
reliably on a 12th gen 12-core Intel CPU, and there is some evidence
that it also slightly speeds up boot performance.
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Boot and suspend/resume should not be slowed down in kernels built with
CONFIG_RCU_LAZY=y. In particular, suspend can sometimes fail in such
kernels.
This commit therefore adds rcu_async_hurry(), rcu_async_relax(), and
rcu_async_should_hurry() functions that track whether or not either
a boot or a suspend/resume operation is in progress. This will
enable a later commit to refrain from laziness during those times.
Export rcu_async_should_hurry(), rcu_async_hurry(), and rcu_async_relax()
for later use by rcutorture.
[ paulmck: Apply feedback from Steve Rostedt. ]
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_boost_kthread_setaffinity() function is invoked at
rcutree_online_cpu() and rcutree_offline_cpu() time, early in the online
timeline and late in the offline timeline, respectively. It is also
invoked from rcutree_dead_cpu(), however, in the absence of userspace
manipulations (for which userspace must take responsibility), this call
is redundant with that from rcutree_offline_cpu(). This redundancy can
be demonstrated by printing out the relevant cpumasks
This commit therefore removes the call to rcu_boost_kthread_setaffinity()
from rcutree_dead_cpu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
The maximum value of RCU CPU stall-warning timeouts has historically been
five minutes (300 seconds). However, the recently introduced expedited
RCU CPU stall-warning timeout is instead limited to 21 seconds. This
causes problems for CI/fuzzing services such as syzkaller by obscuring
the issue in question with expedited RCU CPU stall-warning timeout splats.
This commit therefore sets the RCU_EXP_CPU_STALL_TIMEOUT Kconfig options
upper bound to 300000 milliseconds, which is 300 seconds (AKA 5 minutes).
[ paulmck: Apply feedback from Hillf Danton. ]
[ paulmck: Apply feedback from Geert Uytterhoeven. ]
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Time stamps are added to the output in kernels built with
CONFIG_PRINTK_TIME=y, which causes misaligned output. Therefore,
replace pr_cont() with pr_err(), which fixes alignment and gets
rid of a couple of despised pr_cont() calls.
Before:
[ 37.567343] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 37.567839] rcu: 0-....: (1500 ticks this GP) idle=***
[ 37.568270] (t=1501 jiffies g=4717 q=28 ncpus=4)
[ 37.568668] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #8
After:
[ 36.762074] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 36.762543] rcu: 0-....: (1499 ticks this GP) idle=***
[ 36.763003] rcu: (t=1500 jiffies g=5097 q=27 ncpus=4)
[ 36.763522] CPU: 0 PID: 313 Comm: test0 Not tainted 6.1.0-rc4 #9
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because RCU CPU stall warnings are driven from the scheduling-clock
interrupt handler, a workload consisting of a very large number of
short-duration hardware interrupts can result in misleading stall-warning
messages. On systems supporting only a single level of interrupts,
that is, where interrupts handlers cannot be interrupted, this can
produce misleading diagnostics. The stack traces will show the
innocent-bystander interrupted task, not the interrupts that are
at the very least exacerbating the stall.
This situation can be improved by displaying the number of interrupts
and the CPU time that they have consumed. Diagnosing other types
of stalls can be eased by also providing the count of softirqs and
the CPU time that they consumed as well as the number of context
switches and the task-level CPU time consumed.
Consider the following output given this change:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1250 ticks this GP) <omitted>
rcu: hardirqs softirqs csw/system
rcu: number: 624 45 0
rcu: cputime: 69 1 2425 ==> 2500(ms)
This output shows that the number of hard and soft interrupts is small,
there are no context switches, and the system takes up a lot of time. This
indicates that the current task is looping with preemption disabled.
The impact on system performance is negligible because snapshot is
recorded only once for all continuous RCU stalls.
This added debugging information is suppressed by default and can be
enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or
by booting with rcupdate.rcu_cpu_stall_cputime=1.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The sparse __acquires() and __releases() annotations provide very
little value. The argument is ignored, so sparse cannot tell the
differences between acquiring one lock and releasing another on the one
hand and acquiring and releasing a given lock on the other. In addition,
lockdep annotations provide much more precision, for but one example,
actually knowing which lock is held.
This commit therefore removes the __acquires() and __releases()
annotations from rcutorture.
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds three read-side-only tests of three use cases featuring
SLAB_TYPESAFE_BY_RCU: One using per-object reference counting, one using
per-object locking, and one using per-object sequence locking.
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Current tests all have init() functions that are guaranteed to succeed.
But upcoming tests will need to allocate memory, thus possibly failing.
This commit therefore handles init() function failure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_tasks_need_gpcb() determines whether or not: (1) There are
callbacks needing another grace period, (2) There are callbacks ready
to be invoked, and (3) It would be a good time to shrink back down to a
single-CPU callback list. This third case is interesting because some
other CPU might be adding new callbacks, which might suddenly make this
a very bad time to be shrinking.
This is currently handled by requiring call_rcu_tasks_generic() to
enqueue callbacks under the protection of rcu_read_lock() and requiring
rcu_tasks_need_gpcb() to wait for an RCU grace period to elapse before
finalizing the transition. This works well in practice.
Unfortunately, the current code assumes that a grace period whose end is
detected by the poll_state_synchronize_rcu() in the second "if" condition
actually ended before the earlier code counted the callbacks queued on
CPUs other than CPU 0 (local variable "ncbsnz"). Given the current code,
it is possible that a long-delayed call_rcu_tasks_generic() invocation
will queue a callback on a non-zero CPU after these CPUs have had their
callbacks counted and zero has been stored to ncbsnz. Such a callback
would trigger the WARN_ON_ONCE() in the second "if" statement.
To see this, consider the following sequence of events:
o CPU 0 invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It sees at least one
callback queued on some other CPU, thus setting ncbsnz
to a non-zero value.
o CPU 1 invokes call_rcu_tasks_generic() and loads 42 from
->percpu_enqueue_lim. It therefore decides to enqueue its
callback onto CPU 1's callback list, but is delayed.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, and sees that its value is greater
than the value one. CPU 0 therefore starts the shift back
to a single callback list. It sets ->percpu_enqueue_lim to 1,
but CPU 1 has already read the old value of 42. It also gets
a grace-period state value from get_state_synchronize_rcu().
o CPU 0 sees that ncbsnz is non-zero in its second "if" statement,
so it declines to finalize the shrink operation.
o CPU 0 again invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It also sees that there are
no callback queued on any other CPU, and thus sets ncbsnz to zero.
o CPU 1 resumes execution and enqueues its callback onto its own
list. This invalidates the value of ncbsnz.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, but sees that its value is already
unity. It therefore does not get a new grace-period state value.
o CPU 0 sees that rcu_task_cb_adjust is non-zero, ncbsnz is zero,
and that poll_state_synchronize_rcu() says that the grace period
has completed. it therefore finalizes the shrink operation,
setting ->percpu_dequeue_lim to the value one.
o CPU 0 does a debug check, scanning the other CPUs' callback lists.
It sees that CPU 1's list has a callback, so it (rightly)
triggers the WARN_ON_ONCE(). After all, the new value of
->percpu_dequeue_lim says to not bother looking at CPU 1's
callback list, which means that this callback will never be
invoked. This can result in hangs and maybe even OOMs.
Based on long experience with rcutorture, this is an extremely
low-probability race condition, but it really can happen, especially in
preemptible kernels or within guest OSes.
This commit therefore checks for completion of the grace period
before counting callbacks. With this change, in the above failure
scenario CPU 0 would know not to prematurely end the shrink operation
because the grace period would not have completed before the count
operation started.
[ paulmck: Adjust grace-period end rather than adding RCU reader. ]
[ paulmck: Avoid spurious WARN_ON_ONCE() with ->percpu_dequeue_lim check. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp()
to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp()
function in turn checks if there is only a single online CPU. If so, it
will immediately return, because a call to synchronize_rcu_tasks_rude()
is by definition a grace period on a single-CPU system. (We could
have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization,
which can result in too-short grace periods. To see this, consider the
following scenario:
CPU0 CPU1 (going offline)
migration/1 task:
cpu_stopper_thread
-> take_cpu_down
-> _cpu_disable
(dec __num_online_cpus)
->cpuhp_invoke_callback
preempt_disable
access old_data0
task1
del old_data0 .....
synchronize_rcu_tasks_rude()
task1 schedule out
....
task2 schedule in
rcu_tasks_rude_wait_gp()
->__num_online_cpus == 1
->return
....
task1 schedule in
->free old_data0
preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However,
CPU1 has not finished going offline, and will take one last trip through
the scheduler and the idle loop before it actually stops executing
instructions. Because synchronize_rcu_tasks_rude() is mostly used for
tracing, and because both the scheduler and the idle loop can be traced,
this means that CPU0's prematurely ended grace period might disrupt the
tracing on CPU1. Given that this disruption might include CPU1 executing
instructions in memory that was just now freed (and maybe reallocated),
this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the
rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU
optimization, but there is no evidence indicating that this optimization
is important. In addition, synchronize_rcu_tasks_generic() contains a
similar optimization (albeit only for early boot), which also splats.
(As in exactly why are you invoking synchronize_rcu_tasks_rude() so
early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be
unsynchronized because the only times that this check can evaluate to
true is when there is only a single CPU running with preemption
disabled.
While in the area, this commit also fixes a minor bug in which a
call to synchronize_rcu_tasks_rude() would instead be attributed to
synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d2 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Ever since the following commit:
5a41344a3d ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, test_rcu_tasks_callback() reads from the jiffies counter only
once when this function is invoked. This introduces inaccuracies because
of the latencies induced by the synchronize_rcu_tasks*() invocations.
This commit therefore re-reads the jiffies counter at the beginning
of each test, thus avoiding penalizing later tests for the latencies
induced by earlier tests.
Therefore, this commit at the start of each RCU Tasks test, re-fetch the
jiffies time as the runstart time.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because there is not guaranteed to be a full memory barrier between
the ->srcu_unlock_count increment of an srcu_read_unlock() and the
->srcu_lock_count increment of the next srcu_read_lock(), this next
srcu_read_lock() is not guaranteed to see the effect of the index flip
just prior to this comment. However, this next srcu_read_lock() will
execute a full memory barrier, so the srcu_read_lock() after that is
guaranteed to see that index flip.
This guarantee is illustrated by the following diagram of events and
the litmus test following that.
------------------------------------------------------------------------
READER UPDATER
------------- ----------
// idx is initially 0.
srcu_flip() {
smp_mb();
// RSCS
srcu_read_unlock() {
smp_mb();
idx++; // P
smp_mb(); // QQ
}
srcu_readers_unlock_idx(0) {
,--counted------------ count all unlock[0]; // Q
|
unlock[0]++; // X
}
smp_mb();
srcu_read_lock() {
READ(idx) = 0; ,---- count all lock[0]; // contributes imbalance of 1.
lock[0]++; ----counted |
smp_mb(); // PP } |
} |
|
// RSCS not going to effect above scan
|
srcu_read_unlock() { |
smp_mb(); |
unlock[0]++; |
} |
/
/
srcu_read_lock() { |
READ(idx); // Y -----cannot be counted because of P (has to sample idx as 1)
lock[1]++;
...
}
------------------------------------------------------------------------
This makes it similar to the store buffer pattern. Using X, Y, P and Q
annotated above, we get:
------------------------------------------------------------------------
READER UPDATER
X (write) P (write)
smp_mb(); //PP smp_mb(); //QQ
Y (read) Q (read)
------------------------------------------------------------------------
ASCII art courtesy of Joel Fernandes.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The comment in srcu_readers_active_idx_check() following the smp_mb()
is out of date, hailing from a simpler time when preemption was disabled
across the bulk of __srcu_read_lock(). The fact that preemption was
disabled meant that the number of tasks that had fetched the old index
but not yet incremented counters was limited by the number of CPUs.
In our more complex modern times, the number of CPUs is no longer a limit.
This commit therefore updates this comment, additionally giving more
memory-ordering detail.
[ paulmck: Apply Nt->Nc feedback from Joel Fernandes. ]
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Reported-by: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The srcu_gp_start_if_needed() function now read-holds the srcu_struct
whose grace period is being started, which means that the corresponding
SRCU grace period cannot end. This in turn means that the SRCU
grace-period sequence number returned by rcu_seq_snap() cannot expire
during this time. And that means that the calls to rcu_seq_done() in
srcu_funnel_exp_start() and srcu_funnel_gp_start() can never return true.
This commit therefore removes these rcu_seq_done() checks, but adds checks
in kernels built with CONFIG_PROVE_RCU=y that splats if rcu_seq_done()
does somehow return true.
[ paulmck: Rearrange checks to handle kernels built with lockdep. ]
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A grace-period sequence number contains two fields: counter and
state. SRCU_SNP_INIT_SEQ provides a guaranteed invalid value for
grace-period sequence numbers in newly allocated srcu_node structures'
->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp fields. The point of the
comparison in srcu_invl_snp_seq() is not to detect invalid grace-period
sequence numbers in general, but rather to detect a newly allocated
srcu_node structure whose ->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp
fields need to be brought into line with the srcu_struct structure's
->srcu_gp_seq field.
This commit therefore causes srcu_invl_snp_seq() to compare both fields
of the specified grace-period sequence number.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <rcu@vger.kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with the CONFIG_TREE_SRCU Kconfig option set and then
booted with rcupdate.rcu_self_test=1 and srcutree.convert_to_big=1 will
test Tree SRCU during early boot. The early_srcu structure's srcu_node
array will be allocated when init_srcu_struct_fields() is invoked,
but after the test completes this early_srcu structure will not be used.
This commit therefore invokes cleanup_srcu_struct() to free that srcu_node
structure.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This patch splits the lists of objects so as to avoid sending any
through RCU that have already been queued for more than one grace
period. These long-term-resident objects are immediately freed.
The remaining short-term-resident objects are queued for later freeing
using queue_rcu_work().
This change avoids delaying workqueue handlers with synchronize_rcu()
invocations. Yes, workqueue handlers are designed to handle blocking,
but avoiding blocking when unnecessary improves performance during
low-memory situations.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The schedule_delayed_monitor_work() function relies on the count of
objects queued into any given kfree_rcu_cpu structure. This count is
used to determine how quickly to schedule passing these objects to RCU.
There are three pipes where pointers can be placed. When any pipe is
offloaded, the kfree_rcu_cpu structure's ->count counter is set to zero,
which is wrong because the other pipes might still be non-empty.
This commit therefore maintains per-pipe counters, and introduces a
krc_count() helper to access the aggregate value of those counters.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The need_offload_krc() function is now lock-free, which gives the
compiler freedom to load old values from plain C-language loads from
the kfree_rcu_cpu struture's ->head pointer. This commit therefore
applied READ_ONCE() to these loads.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently all objects placed into a batch wait for a full grace period
to elapse after that batch is ready to send to RCU. However, this
can unnecessarily delay freeing of the first objects that were added
to the batch. After all, several RCU grace periods might have elapsed
since those objects were added, and if so, there is no point in further
deferring their freeing.
This commit therefore adds per-page grace-period snapshots which are
obtained from get_state_synchronize_rcu(). When the batch is ready
to be passed to call_rcu(), each page's snapshot is checked by passing
it to poll_state_synchronize_rcu(). If a given page's RCU grace period
has already elapsed, its objects are freed immediately by kvfree_rcu_bulk().
Otherwise, these objects are freed after a call to synchronize_rcu().
This approach requires that the pages be traversed in reverse order,
that is, the oldest ones first.
Test example:
kvm.sh --memory 10G --torture rcuscale --allcpus --duration 1 \
--kconfig CONFIG_NR_CPUS=64 \
--kconfig CONFIG_RCU_NOCB_CPU=y \
--kconfig CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y \
--kconfig CONFIG_RCU_LAZY=n \
--bootargs "rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 \
rcuscale.holdoff=20 rcuscale.kfree_loops=10000 \
torture.disable_onoff_at_boot" --trust-make
Before this commit:
Total time taken by all kfree'ers: 8535693700 ns, loops: 10000, batches: 1188, memory footprint: 2248MB
Total time taken by all kfree'ers: 8466933582 ns, loops: 10000, batches: 1157, memory footprint: 2820MB
Total time taken by all kfree'ers: 5375602446 ns, loops: 10000, batches: 1130, memory footprint: 6502MB
Total time taken by all kfree'ers: 7523283832 ns, loops: 10000, batches: 1006, memory footprint: 3343MB
Total time taken by all kfree'ers: 6459171956 ns, loops: 10000, batches: 1150, memory footprint: 6549MB
After this commit:
Total time taken by all kfree'ers: 8560060176 ns, loops: 10000, batches: 1787, memory footprint: 61MB
Total time taken by all kfree'ers: 8573885501 ns, loops: 10000, batches: 1777, memory footprint: 93MB
Total time taken by all kfree'ers: 8320000202 ns, loops: 10000, batches: 1727, memory footprint: 66MB
Total time taken by all kfree'ers: 8552718794 ns, loops: 10000, batches: 1790, memory footprint: 75MB
Total time taken by all kfree'ers: 8601368792 ns, loops: 10000, batches: 1724, memory footprint: 62MB
The reduction in memory footprint is well in excess of an order of
magnitude.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The need_offload_krc() function currently holds the krcp->lock in order
to safely check krcp->head. This commit removes the need for this lock
in that function by updating the krcp->head pointer using WRITE_ONCE()
macro so that readers can carry out lockless loads of that pointer.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvfree_rcu() code maintains lists of pages of pointers, but also a
singly linked list, with the latter being used when memory allocation
fails. Traversal of these two types of lists is currently open coded.
This commit simplifies the code by providing kvfree_rcu_bulk() and
kvfree_rcu_list() functions, respectively, to traverse these two types
of lists. This patch does not introduce any functional change.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit improves the readability and maintainability of the
kvfree_rcu() code by switching from an open-coded linked list to
the standard Linux-kernel circular doubly linked list. This patch
does not introduce any functional change.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently a kvfree_call_rcu() takes an offset within a structure as
a second parameter, so a helper such as a kvfree_rcu_arg_2() has to
convert rcu_head and a freed ptr to an offset in order to pass it. That
leads to an extra conversion on macro entry.
Instead of converting, refactor the code in way that a pointer that has
to be freed is passed directly to the kvfree_call_rcu().
This patch does not make any functional change and is transparent to
all kvfree_rcu() users.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit introduces the rcupdate.rcu_exp_stall_task_details kernel
boot parameter, which cause expedited RCU CPU stall warnings to dump
the stacks of any tasks blocking the current expedited grace period.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit tests synchronize_rcu() and synchronize_rcu_expedited()
at the end of rcu_init(), in addition to the test already at the
beginning of that function. These tests are run only in kernels built
with CONFIG_PROVE_RCU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_blocking_is_gp() invokes might_sleep() even during early
boot when interrupts are disabled and before the scheduler is scheduling.
This is at best an accident waiting to happen. Therefore, this commit
moves that might_sleep() under an rcu_scheduler_active check in order
to ensure that might_sleep() is not invoked unless sleeping might actually
happen.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The normal grace period's RCU CPU stall warnings are invoked from the
scheduling-clock interrupt handler, and can thus invoke smp_processor_id()
with impunity, which allows them to directly invoke dump_cpu_task().
In contrast, the expedited grace period's RCU CPU stall warnings are
invoked from process context, which causes the dump_cpu_task() function's
calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable
preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit emphasizes the possibility of concurrent calls to
synchronize_rcu() and synchronize_rcu_expedited() causing one or
the other of the two grace periods being lost from the viewpoint of
poll_state_synchronize_rcu().
If you cannot afford to lose grace periods this way, you should
instead use the _full() variants of the polled RCU API, for
example, poll_state_synchronize_rcu_full().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_do_batch() sizes its batches based on the total number
of callbacks in the callback list. This can result in some strange
choices, for example, if there was 12,800 callbacks in the list, but
only 200 were ready to invoke, RCU would invoke 100 at a time (12,800
shifted down by seven bits).
A more measured approach would use the number that were actually ready
to invoke, an approach that has become feasible only recently given the
per-segment ->seglen counts in ->cblist.
This commit therefore bases the batch limit on the number of callbacks
ready to invoke instead of on the total number of callbacks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit consolidates the initialization and CPU-hotplug code at
the end of kernel/rcu/tree.c. This is strictly a code-motion commit.
No functionality has changed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit fixes a lockdep false positive in synchronize_rcu() that
can otherwise occur during early boot. Theis fix simply avoids invoking
lockdep if the scheduler has not yet been initialized, that is, during
that portion of boot when interrupts are disabled.
-----BEGIN PGP SIGNATURE-----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=UKUo
-----END PGP SIGNATURE-----
Merge tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This fixes a lockdep false positive in synchronize_rcu() that can
otherwise occur during early boot.
The fix simply avoids invoking lockdep if the scheduler has not yet
been initialized, that is, during that portion of boot when interrupts
are disabled"
* tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Don't assert interrupts enabled too early in boot
The rcu_poll_gp_seq_end() and rcu_poll_gp_seq_end_unlocked() both check
that interrupts are enabled, as they normally should be when waiting for
an RCU grace period. Except that it is legal to wait for grace periods
during early boot, before interrupts have been enabled for the first time,
and polling for grace periods is required to work during this time.
This can result in false-positive lockdep splats in the presence of
boot-time-initiated tracing.
This commit therefore conditions those interrupts-enabled checks on
rcu_scheduler_active having advanced past RCU_SCHEDULER_INACTIVE, by
which time interrupts have been enabled.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmOYXUcSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOk8zQP/R7BZtbJMTPiWkRnSoKHnAyupDVwrz5U
ktukLkwPsCyJuEbAjgxrxf4EEEQ9uq2FFlxNSYuKiiQMqIpFxV6KED7LCUygn4Tc
kxtkp0Q+5XiqisWlQmtfExf2OjuuPqcjV9tWCDBI6GebKUbfNwY/eI44RcMu4BSv
DzIlW5GkX/kZAPqnnuqaLsN3FudDTJHGEAD7NbA++7wJ076RWYSLXlFv0Z+SCSPS
H8/PEG0/ZK/65rIWMAFRClJ9BNIDwGVgp0GrsIvs1gqbRUOlA1hl1rDM21TqtNFf
5QPQT7sIfTcCE/nerxKJD5JE3JyP+XRlRn96PaRw3rt4MgI6I/EOj/HOKQ5tMCNc
oPiqb7N70+hkLZyr42qX+vN9eDPjp2koEQm7EO2Zs+/534/zWDs24Zfk/Aa1ps0I
Fa82oGjAgkBhGe/FZ6i5cYoLcyxqRqZV1Ws9XQMl72qRC7/BwvNbIW6beLpCRyeM
yYIU+0e9dEm+wHQEdh2niJuVtR63hy8tvmPx56lyh+6u0+pondkwbfSiC5aD3kAC
ikKsN5DyEsdXyiBAlytCEBxnaOjQy4RAz+3YXSiS0eBNacXp03UUrNGx4Pzpu/D0
QLFJhBnMFFCgy5to8/DvKnrTPgZdSURwqbIUcZdvU21f1HLR8tUTpaQnYffc/Whm
V8gnt1EL+0cc
=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
-----BEGIN PGP SIGNATURE-----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=1PTZ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
this_cpu_inc() on strong load-store architectures.
- Introduce new console_list_lock to synchronize a manipulation of the
list of registered consoles and their flags.
This is a first step in removing the big-kernel-lock-like behavior of
console_lock(). This semaphore still serializes console->write()
calbacks against:
- each other. It primary prevents potential races between early
and proper console drivers using the same device.
- suspend()/resume() callbacks and init() operations in some
drivers.
- various other operations in the tty/vt and framebufer
susbsystems. It is likely that console_lock() serializes even
operations that are not directly conflicting with the
console->write() callbacks here. This is the most complicated
big-kernel-lock aspect of the console_lock() that will be hard
to untangle.
- Introduce new console_srcu lock that is used to safely iterate and
access the registered console drivers under SRCU read lock.
This is a prerequisite for introducing atomic console drivers and
console kthreads. It will reduce the complexity of serialization
against normal consoles and console_lock(). Also it should remove the
risk of deadlock during critical situations, like Oops or panic, when
only atomic consoles are registered.
- Check whether the console is registered instead of enabled on many
locations. It was a historical leftover.
- Cleanly force a preferred console in xenfb code instead of a dirty
hack.
- A lot of code and comment clean ups and improvements.
* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
printk: htmldocs: add missing description
tty: serial: sh-sci: use setup() callback for early console
printk: relieve console_lock of list synchronization duties
tty: serial: kgdboc: use console_list_lock to trap exit
tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
tty: serial: kgdboc: use console_list_lock for list traversal
tty: serial: kgdboc: use srcu console list iterator
proc: consoles: use console_list_lock for list iteration
tty: tty_io: use console_list_lock for list synchronization
printk, xen: fbfront: create/use safe function for forcing preferred
netconsole: avoid CON_ENABLED misuse to track registration
usb: early: xhci-dbc: use console_is_registered()
tty: serial: xilinx_uartps: use console_is_registered()
tty: serial: samsung_tty: use console_is_registered()
tty: serial: pic32_uart: use console_is_registered()
tty: serial: earlycon: use console_is_registered()
tty: hvc: use console_is_registered()
efi: earlycon: use console_is_registered()
tty: nfcon: use console_is_registered()
serial_core: replace uart_console_enabled() with uart_console_registered()
...
This pull request contains the following branches:
doc.2022.10.20a: Documentation updates. This is the second
in a series from an ongoing review of the RCU documentation.
fixes.2022.10.21a: Miscellaneous fixes.
lazy.2022.11.30a: Introduces a default-off Kconfig option that depends
on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or
rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce
delays. These delays result in significant power savings on
nearly idle Android and ChromeOS systems. These savings range
from a few percent to more than ten percent.
This series also includes several commits that change call_rcu()
to a new call_rcu_hurry() function that avoids these delays in
a few cases, for example, where timely wakeups are required.
Several of these are outside of RCU and thus have acks and
reviews from the relevant maintainers.
srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an
srcu_read_unlock_nmisafe() for architectures that support NMIs,
but which do not provide NMI-safe this_cpu_inc(). These NMI-safe
SRCU functions are required by the upcoming lockless printk()
work by John Ogness et al.
That printk() series depends on these commits, so if you pull
the printk() series before this one, you will have already
pulled in this branch, plus two more SRCU commits:
0cd7e350ab ("rcu: Make SRCU mandatory")
51f5f78a4f ("srcu: Make Tiny synchronize_srcu() check for readers")
These two commits appear to work well, but do not have
sufficient testing exposure over a long enough time for me to
feel comfortable pushing them unless something in mainline is
definitely going to use them immediately, and currently only
the new printk() work uses them.
torture.2022.10.18c: Changes providing minor but important increases
in test coverage for the new RCU polled-grace-period APIs.
torturescript.2022.10.20a: Changes that avoid redundant kernel builds,
thus providing about a 30% speedup for the torture.sh acceptance
test.
-----BEGIN PGP SIGNATURE-----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=eMOr
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
This commit adds lockdep checks for illegal use of synchronize_srcu()
within same-type SRCU read-side critical sections and within normal
RCU read-side critical sections. It also makes synchronize_srcu()
be a no-op during early boot.
These changes bring Tiny synchronize_srcu() into line with both Tree
synchronize_srcu() and Tiny synchronize_rcu().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: John Ogness <john.ogness@linutronix.de>
Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build
failures. This causes trouble for deep embedded systems. But given
that there are more than 25 instances of "select SRCU" in the kernel,
it is hard to believe that there are many kernels running in production
without SRCU. This commit therefore makes SRCU mandatory. The SRCU
Kconfig option remains for backwards compatibility, and will be removed
when it is no longer used.
[ paulmck: Update per kernel test robot feedback. ]
Reported-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: John Ogness <john.ogness@linutronix.de>
call_rcu() changes to save power will change the behavior of rcutorture
tests. Use the call_rcu_hurry() API instead which reverts to the old
behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
rcuscale uses call_rcu() to queue async readers. With recent changes to
save power, the test will have fewer async readers in flight. Use the
call_rcu_hurry() API instead to revert to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
call_rcu() changes to save power will slow down rcu sync. Use the
call_rcu_hurry() API instead which reverts to the old behavior.
[ paulmck: Apply s/call_rcu_flush/call_rcu_hurry/ feedback from Tejun Heo. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
