I often forget the exact naming of ops and have to look at
the spec to find it. Add support for listing the operations:
$ ./cli.py --spec .../netdev.yaml --list-ops
dev-get [ do, dump ]
page-pool-get [ do, dump ]
page-pool-stats-get [ do, dump ]
queue-get [ do, dump ]
napi-get [ do, dump ]
qstats-get [ dump ]
For completeness also support listing all ops (including
notifications:
# ./cli.py --spec .../netdev.yaml --list-msgs
dev-get [ dump, do ]
dev-add-ntf [ notify ]
dev-del-ntf [ notify ]
dev-change-ntf [ notify ]
page-pool-get [ dump, do ]
page-pool-add-ntf [ notify ]
page-pool-del-ntf [ notify ]
page-pool-change-ntf [ notify ]
page-pool-stats-get [ dump, do ]
queue-get [ dump, do ]
napi-get [ dump, do ]
qstats-get [ dump ]
Use double space after the name for slightly easier to read
output.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using YNL in tests appending the doc string to the type
name makes it harder to check that we got the correct error.
Put the doc under a separate key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240426003111.359285-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a "--multi <do-op> <json>" command line to ynl that makes it
possible to add several operations to a single netlink request payload.
The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For
example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NetlinkProtocol.decode() was looking up ops by response value which breaks
when it is used for extack decoding of directional ops. Instead, pass
the op to decode().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:
# ip link add bond0 type bond mode 1 \
arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'
"arp-ip-target": [
"192.168.1.1",
"192.168.1.2"
],
[...]
"ns-ip6-target": [
"2001::1",
"2001::2"
],
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Checking if dump is empty requires a couple of casts.
Add a convenient wrapper.
Add an example use in the netdev sample, loopback is always
present so an empty dump is an error.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240329181651.319326-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NLMSGERR_ATTR_POLICY extack attribute has been ignored by ynl up to
now. Extend extack decoding to include _POLICY and the nested
NL_POLICY_TYPE_ATTR_* attributes.
For example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--create --do newlink --json '{
"ifname": "12345678901234567890",
"linkinfo": {"kind": "bridge"}
}'
Netlink error: Numerical result out of range
nl_len = 104 (88) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'Attribute failed policy validation',
'policy': {'max-length': 15, 'type': 'string'}, 'bad-attr': '.ifname'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240328155636.64688-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some times it would be convenient to read the integer as hex, like
mask values.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit a731132424
("genetlink: introduce per-sock family private storage").
For example if the family wants to use struct sk_buff as its
private struct (unrealistic but just for illustration), it would
add to its spec:
kernel-family:
headers: [ "linux/skbuff.h" ]
sock-priv: struct sk_buff
ynl-gen-c will declare the appropriate priv size and hook
in function prototypes to be implemented by the family.
Link: https://lore.kernel.org/r/20240308190319.2523704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst
Add nest-type-value decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl does not handle NlError exceptions so they get reported like program
failures. Handle the NlError exceptions and report the netlink errors
more cleanly.
Example now:
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Example before:
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module>
main()
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op
raise NlError(nl_msg)
lib.ynl.NlError: Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extack decoding was using a hard-coded msg header size of 20 but
netlink-raw has a header size of 16.
Use a protocol specific msghdr_size() when decoding the attr offssets.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald points out that we don't check for overflows.
Stash the length of the message on nlmsg_pid (nlmsg_seq would
do as well). This allows the attribute helpers to remain
self-contained (no extra arguments). Also let the put
helpers continue to return nothing. The error is checked
only in (newly introduced) ynl_msg_end().
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To stick to libmnl wrappers in the past we had to use poll()
to check if there are any outstanding notifications on the socket.
This is no longer necessary, we can use MSG_DONTWAIT.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-16-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most libmnl socket helpers can be replaced by direct calls to
the underlying libc API. We need portid, the netlink manpage
suggests we bind() address of zero.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing callbacks take struct ynl_parse_arg as the argument.
Make that official by using a local callback type instead of mnl_cb_t.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's only one set of callbacks in YNL, for netlink control
messages, and most of them are trivial. So implement the message
walking directly without depending on mnl_cb_run2().
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl_recv_ack() is simple and it's the only user of mnl_cb_run().
Now that ynl_sock_read_msgs() exists it's actually less code
to use ynl_sock_read_msgs() instead of being special.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers to mnl_cb_run2() call mnl_socket_recvfrom() right before.
Wrap the two in a helper, take typed arguments (struct ynl_parse_arg),
instead of hoping that all callers remember that parser error handling
requires yarg.
In case of ynl_sock_read_family() we will no longer check for kernel
returning no data, but that would be a kernel bug, not worth complicating
the code to catch this. Calling mnl_cb_run2() on an empty buffer
is legal and results in STOP (1).
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f2ba1e5e22 ("tools: ynl-gen: stop generating common notification handlers")
removed the last caller of the parse_cb_run() helper.
We no longer need to export ynl_cb_array.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All YNL parsing code expects a pointer to struct ynl_parse_arg AKA yarg.
For dump was pass in struct ynl_dump_state, which works fine, because
struct ynl_dump_state and struct ynl_parse_arg have identical layout
for the members that matter.. but it's a bit hacky.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create helpers for accessing payloads of struct nlmsg.
Use them instead of the libmnl ones.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't use mnl attr helpers, we're trying to remove the libmnl
dependency. Create both signed and unsigned helpers, libmnl
had unsigned helpers, so code generator no longer needs
the mnl_type() hack.
The new helpers are written from first principles, but are
hopefully not too buggy.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temporary auto-int helpers are not really correct.
We can't treat signed and unsigned ints the same when
determining whether we need full 8B. I realized this
before sending the patch to add support in libmnl.
Unfortunately, that patch has not been merged,
so time to fix our local helpers. Use the mnl* name
for now, subsequent patches will address that.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240227223032.1835527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During decoding of messages coming from kernel, attribute values are
converted to enum names in case the attribute type is enum of bitfield32.
However, when user constructs json message, he has to pass plain scalar
values. See "state" "selector" and "value" attributes in following
examples:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": 1}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": 1, "value": 1 }}}'
Allow user to pass strings containing enum names, convert them to scalar
values to be encoded into Netlink message:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": "connected"}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": ["roce-bit"], "value": ["roce-bit"] }}}'
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a preparation to handle enums for scalar values, unify the processing
of all scalar types in a single elif statement.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240222134351.224704-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag attr presence in Netlink message indicates value "true",
if it is missing in the message it means "false".
Allow user to specify attrname with value "true"/"false"
in json for flag attrs, treat "false" value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).
ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If message contains unknown attribute and user passes
"--process-unknown" command line option, _decode() gets called with space
arg set to None. In that case, attr_space variable is not initialized
used which leads to following trace:
Traceback (most recent call last):
File "./tools/net/ynl/cli.py", line 77, in <module>
main()
File "./tools/net/ynl/cli.py", line 68, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 909, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 894, in _op
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 639, in _decode
self._rsp_add(rsp, attr_name, None, self._decode_unknown(attr))
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 569, in _decode_unknown
return self._decode(NlAttrs(attr.raw), None)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "tools/net/ynl/lib/ynl.py", line 630, in _decode
search_attrs = SpaceAttrs(attr_space, rsp, outer_attrs)
^^^^^^^^^^
UnboundLocalError: cannot access local variable 'attr_space' where it is not associated with a value
Fix this by moving search_attrs assignment under the if statement
above it to make sure attr_space is initialized.
Fixes: bf8b832374 ("tools/net/ynl: Support sub-messages in nested attribute spaces")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
