Commit Graph

3607 Commits

Author SHA1 Message Date
Stephan Müller
0baa8fab33 crypto: jitter - Allow configuration of oversampling rate
The oversampling rate used by the Jitter RNG allows the configuration of
the heuristically implied entropy in one timing measurement. This
entropy rate is (1 / OSR) bits of entropy per time stamp.

Considering that the Jitter RNG now support APT/RCT health tests for
different OSRs, allow this value to be configured at compile time to
support systems with limited amount of entropy in their timer.

The allowed range of OSR values complies with the APT/RCT cutoff health
test values which range from 1 through 15.

The default value of the OSR selection support is left at 1 which is the
current default. Thus, the addition of the configuration support does
not alter the default Jitter RNG behavior.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01 16:28:15 +08:00
Stephan Müller
59bcfd7885 crypto: jitter - Allow configuration of memory size
The memory size consumed by the Jitter RNG is one contributing factor in
the amount of entropy that is gathered. As the amount of entropy
directly correlates with the distance of the memory from the CPU, the
caches that are possibly present on a given system have an impact on the
collected entropy.

Thus, the kernel compile time should offer a means to configure the
amount of memory used by the Jitter RNG. Although this option could be
turned into a runtime option (e.g. a kernel command line option), it
should remain a compile time option as otherwise adminsitrators who may
not have performed an entropy assessment may select a value that is
inappropriate.

The default value selected by the configuration is identical to the
current Jitter RNG value. Thus, the patch should not lead to any change
in the Jitter RNG behavior.

To accommodate larger memory buffers, kvzalloc / kvfree is used.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01 16:28:15 +08:00
Stephan Müller
04597c8dd6 crypto: jitter - add RCT/APT support for different OSRs
The oversampling rate (OSR) value specifies the heuristically implied
entropy in the recorded data - H_submitter = 1/osr. A different entropy
estimate implies a different APT/RCT cutoff value. This change adds
support for OSRs 1 through 15. This OSR can be selected by the caller
of the Jitter RNG.

For this patch, the caller still uses one hard-coded OSR. A subsequent
patch allows this value to be configured.

In addition, the power-up self test is adjusted as follows:

* It allows the caller to provide an oversampling rate that should be
tested with - commonly it should be the same as used for the actual
runtime operation. This makes the power-up testing therefore consistent
with the runtime operation.

* It calls now jent_measure_jitter (i.e. collects the full entropy
that can possibly be harvested by the Jitter RNG) instead of only
jent_condition_data (which only returns the entropy harvested from
the conditioning component). This should now alleviate reports where
the Jitter RNG initialization thinks there is too little entropy.

* The power-up test now solely relies on the (enhanced) APT and RCT
test that is used as a health test at runtime.

The code allowing the different OSRs as well as the power-up test
changes are present in the user space version of the Jitter RNG 3.4.1
and thus was already in production use for some time.

Reported-by "Ospan, Abylay" <aospan@amazon.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-10-01 16:28:15 +08:00
Herbert Xu
705b52fef3 crypto: cbc - Convert from skcipher to lskcipher
Replace the existing skcipher CBC template with an lskcipher version.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
32a8dc4afc crypto: ecb - Convert from skcipher to lskcipher
This patch adds two different implementations of ECB.  First of
all an lskcipher wrapper around existing ciphers is introduced as
a temporary transition aid.

Secondly a permanent lskcipher template is also added.  It's simply
a wrapper around the underlying lskcipher algorithm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
3dfe8786b1 crypto: testmgr - Add support for lskcipher algorithms
Test lskcipher algorithms using the same logic as cipher algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
8aee5d4ebd crypto: lskcipher - Add compatibility wrapper around ECB
As an aid to the transition from cipher algorithm implementations
to lskcipher, add a temporary wrapper when creating simple lskcipher
templates by using ecb(X) instead of X if an lskcipher implementation
of X cannot be found.

This can be reverted once all cipher implementations have switched
over to lskcipher.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
31865c4c4d crypto: skcipher - Add lskcipher
Add a new API type lskcipher designed for taking straight kernel
pointers instead of SG lists.  Its relationship to skcipher will
be analogous to that between shash and ahash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
b64d143b75 crypto: hash - Hide CRYPTO_ALG_TYPE_AHASH_MASK
Move the macro CRYPTO_ALG_TYPE_AHASH_MASK out of linux/crypto.h
and into crypto/ahash.c so that it's not visible to users of the
Crypto API.

Also remove the unused CRYPTO_ALG_TYPE_HASH_MASK macro.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Herbert Xu
534562e59f crypto: aead - Add crypto_has_aead
Add the helper crypto_has_aead.  This is meant to replace the
existing use of crypto_has_alg to locate AEAD algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Li zeming
17f7b9835a crypto: api - Remove unnecessary NULL initialisation
tfm is assigned first, so it does not need to initialize
the assignment.

Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:15:29 +08:00
Tianjia Zhang
21155620fb crypto: sm2 - Fix crash caused by uninitialized context
In sm2_compute_z_digest() function, the newly allocated structure
mpi_ec_ctx is used, but forget to initialize it, which will cause
a crash when performing subsequent operations.

Fixes: e5221fa6a3 ("KEYS: asymmetric: Move sm2 code into x509_public_key")
Cc: stable@vger.kernel.org # v6.5
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-20 13:10:10 +08:00
Lu Jialin
8f4f68e788 crypto: pcrypt - Fix hungtask for PADATA_RESET
We found a hungtask bug in test_aead_vec_cfg as follows:

INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
 __switch_to+0x98/0xe0
 __schedule+0x6c4/0xf40
 schedule+0xd8/0x1b4
 schedule_timeout+0x474/0x560
 wait_for_common+0x368/0x4e0
 wait_for_completion+0x20/0x30
 wait_for_completion+0x20/0x30
 test_aead_vec_cfg+0xab4/0xd50
 test_aead+0x144/0x1f0
 alg_test_aead+0xd8/0x1e0
 alg_test+0x634/0x890
 cryptomgr_test+0x40/0x70
 kthread+0x1e0/0x220
 ret_from_fork+0x10/0x18
 Kernel panic - not syncing: hung_task: blocked tasks

For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.

The problem comes as following:
(padata_do_parallel)                 |
    rcu_read_lock_bh();              |
    err = -EINVAL;                   |   (padata_replace)
                                     |     pinst->flags |= PADATA_RESET;
    err = -EBUSY                     |
    if (pinst->flags & PADATA_RESET) |
        rcu_read_unlock_bh()         |
        return err

In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.

v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.

Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-09-15 18:29:45 +08:00
Linus Torvalds
68cf01760b This update includes the following changes:
API:
 
 - Move crypto engine callback from tfm ctx into algorithm object.
 - Fix atomic sleep bug in crypto_destroy_instance.
 - Move lib/mpi into lib/crypto.
 
 Algorithms:
 
 - Add chacha20 and poly1305 implementation for powerpc p10.
 
 Drivers:
 
 - Add AES skcipher and aead support to starfive.
 - Add Dynamic Boost Control support to ccp.
 - Add support for STM32P13 platform to stm32.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmTsZkMACgkQxycdCkmx
 i6furw//e6kYK1CTOqidPM6nI0KK1Ok204VXu56H0wM4THZ09ZwcbDNKpvI6vjMi
 XZkKthiayl/1okmpRVP0rPqMWDtxajeu6IUAQqqFGUFU8R7AqCDrOd+te+zlSFWG
 16ySNQO47RND0OzNqZ4ojgCC0n9RpP+zOfndmderZ4EnfXSbodwGUwkcuE7Z96cP
 jNoainO2iwlyMZPlVynrw61O3RxGu/s/ch+uY1mV+TyvAAWoOlzt57gYUs3eGduz
 4Ky+0Ubctg3sfBaqA2Hg6GjtAqG/QUssRyj8YgsFMrgXPHDTbLh6abej39wWo4gz
 ZdC7Bm47hV/yfVdWe2iq3/5iqdILEdPBh3fDh6NNsZ1Jlm3aEZpH9rEXm0k4X2MJ
 A9NDAFVj8dAYVZza7+Y8jPc8FNe+HqN9HYip/2K7g68WAJGWnMc9lq9qGwGmg1Gl
 dn6yM27AgH8B+UljWYM9FS1ZFsc8KCudJavRZqA2d0W3rbXVWAoBBp83ii0yX1Nm
 ZPAblAYMZCDeCtrVrDYKLtGn566rfpCrv3R5cppwHLksGJsDxgWrjG47l9uy5HXI
 u05jiXT11R+pjIU2Wv5qsiUIhyvli6AaiFYHIdZ8fWaovPAOdhrCrN3IryvUVHj/
 LqMcnmW1rWGNYN9pqHn0sQZ730ZJIma0klhTZOn8HPJNbiK68X0=
 =LbcA
 -----END PGP SIGNATURE-----

Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Move crypto engine callback from tfm ctx into algorithm object
   - Fix atomic sleep bug in crypto_destroy_instance
   - Move lib/mpi into lib/crypto

  Algorithms:
   - Add chacha20 and poly1305 implementation for powerpc p10

  Drivers:
   - Add AES skcipher and aead support to starfive
   - Add Dynamic Boost Control support to ccp
   - Add support for STM32P13 platform to stm32"

* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
  Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  crypto: chelsio - Remove unused declarations
  X.509: if signature is unsupported skip validation
  crypto: qat - fix crypto capability detection for 4xxx
  crypto: drivers - Explicitly include correct DT includes
  crypto: engine - Remove crypto_engine_ctx
  crypto: zynqmp - Use new crypto_engine_op interface
  crypto: virtio - Use new crypto_engine_op interface
  crypto: stm32 - Use new crypto_engine_op interface
  crypto: jh7110 - Use new crypto_engine_op interface
  crypto: rk3288 - Use new crypto_engine_op interface
  crypto: omap - Use new crypto_engine_op interface
  crypto: keembay - Use new crypto_engine_op interface
  crypto: sl3516 - Use new crypto_engine_op interface
  crypto: caam - Use new crypto_engine_op interface
  crypto: aspeed - Remove non-standard sha512 algorithms
  crypto: aspeed - Use new crypto_engine_op interface
  crypto: amlogic - Use new crypto_engine_op interface
  crypto: sun8i-ss - Use new crypto_engine_op interface
  crypto: sun8i-ce - Use new crypto_engine_op interface
  ...
2023-08-29 11:23:29 -07:00
Linus Torvalds
f2586d921c Hi,
Contents:
 
 - Restrict linking of keys to .ima and .evm keyrings based on
   digitalSignature attribute in the certificate.
 - PowerVM: load machine owner keys into the .machine [1] keyring.
 - PowerVM: load module signing keys into the secondary trusted keyring
   (keys blessed by the vendor).
 - tpm_tis_spi: half-duplex transfer mode
 - tpm_tis: retry corrupted transfers
 - Apply revocation list (.mokx) to an all system keyrings (e.g. .machine
   keyring).
 
 [1] https://blogs.oracle.com/linux/post/the-machine-keyring
 
 BR, Jarkko
 -----BEGIN PGP SIGNATURE-----
 
 iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZN5/qBIcamFya2tvQGtl
 cm5lbC5vcmcACgkQGnq6IXRrq9J4GQEAstTtQfGGrx5KInOTMWOvaq/Cum5iW4AD
 NefVfbUtCCQBANvFtxoPYQS5u6+rIdxzIwFiNUlOyt2uR2bkk4UUiPML
 =Vvs8
 -----END PGP SIGNATURE-----

Merge tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm updates from Jarkko Sakkinen:

 - Restrict linking of keys to .ima and .evm keyrings based on
   digitalSignature attribute in the certificate

 - PowerVM: load machine owner keys into the .machine [1] keyring

 - PowerVM: load module signing keys into the secondary trusted keyring
   (keys blessed by the vendor)

 - tpm_tis_spi: half-duplex transfer mode

 - tpm_tis: retry corrupted transfers

 - Apply revocation list (.mokx) to an all system keyrings (e.g.
   .machine keyring)

Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1]

* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Reference revocation list for all keyrings
  tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
  tpm: remove redundant variable len
  tpm_tis: Resend command to recover from data transfer errors
  tpm_tis: Use responseRetry to recover from data transfer errors
  tpm_tis: Move CRC check to generic send routine
  tpm_tis_spi: Add hardware wait polling
  KEYS: Replace all non-returning strlcpy with strscpy
  integrity: PowerVM support for loading third party code signing keys
  integrity: PowerVM machine keyring enablement
  integrity: check whether imputed trust is enabled
  integrity: remove global variable from machine_keyring.c
  integrity: ignore keys failing CA restrictions on non-UEFI platform
  integrity: PowerVM support for loading CA keys on machine keyring
  integrity: Enforce digitalSignature usage in the ima and evm keyrings
  KEYS: DigitalSignature link restriction
  tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"
2023-08-29 08:05:18 -07:00
Thore Sommer
ef5b52a631 X.509: if signature is unsupported skip validation
When the hash algorithm for the signature is not available the digest size
is 0 and the signature in the certificate is marked as unsupported.

When validating a self-signed certificate, this needs to be checked,
because otherwise trying to validate the signature will fail with an
warning:

Loading compiled-in X.509 certificates
WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \
pkcs1pad_verify+0x46/0x12c
...
Problem loading in-kernel X.509 certificate (-22)

Signed-off-by: Thore Sommer <public@thson.de>
Cc: stable@vger.kernel.org # v4.7+
Fixes: 6c2dc5ae4a ("X.509: Extract signature digest and make self-signed cert checks earlier")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-25 18:46:55 +08:00
Pavel Skripkin
080aa61e37 crypto: fix uninit-value in af_alg_free_resources
Syzbot was able to trigger use of uninitialized memory in
af_alg_free_resources.

Bug is caused by missing initialization of rsgl->sgl.need_unpin before
adding to rsgl_list. Then in case of extract_iter_to_sg() failure, rsgl
is left with uninitialized need_unpin which is read during clean up

BUG: KMSAN: uninit-value in af_alg_free_sg crypto/af_alg.c:545 [inline]
BUG: KMSAN: uninit-value in af_alg_free_areq_sgls crypto/af_alg.c:778 [inline]
BUG: KMSAN: uninit-value in af_alg_free_resources+0x3d1/0xf60 crypto/af_alg.c:1117
 af_alg_free_sg crypto/af_alg.c:545 [inline]
 af_alg_free_areq_sgls crypto/af_alg.c:778 [inline]
 af_alg_free_resources+0x3d1/0xf60 crypto/af_alg.c:1117
 _skcipher_recvmsg crypto/algif_skcipher.c:144 [inline]
...

Uninit was created at:
 slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
 slab_alloc_node mm/slub.c:3470 [inline]
 __kmem_cache_alloc_node+0x536/0x8d0 mm/slub.c:3509
 __do_kmalloc_node mm/slab_common.c:984 [inline]
 __kmalloc+0x121/0x3c0 mm/slab_common.c:998
 kmalloc include/linux/slab.h:586 [inline]
 sock_kmalloc+0x128/0x1c0 net/core/sock.c:2683
 af_alg_alloc_areq+0x41/0x2a0 crypto/af_alg.c:1188
 _skcipher_recvmsg crypto/algif_skcipher.c:71 [inline]

Fixes: c1abe6f570 ("crypto: af_alg: Use extract_iter_to_sg() to create scatterlists")
Reported-and-tested-by: syzbot+cba21d50095623218389@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cba21d50095623218389
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 18:30:09 +08:00
Herbert Xu
5ce0bc68e0 crypto: engine - Remove crypto_engine_ctx
Remove the obsolete crypto_engine_ctx structure.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 17:01:11 +08:00
Herbert Xu
e5e7eb023f crypto: engine - Move crypto_engine_ops from request into crypto_alg
Rather than having the callback in the request, move it into the
crypto_alg object.  This avoids having crypto_engine look into the
request context is private to the driver.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 17:01:10 +08:00
Herbert Xu
45c461c503 crypto: engine - Create internal/engine.h
Create crypto/internal/engine.h to house details that should not
be used by drivers.  It is empty for the time being.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 17:01:10 +08:00
Herbert Xu
68021dee25 crypto: engine - Move crypto inclusions out of header file
The engine file does not need the actual crypto type definitions
so move those header inclusions to where they are actually used.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 17:01:10 +08:00
Herbert Xu
bcd6e41d98 crypto: engine - Remove prepare/unprepare request
The callbacks for prepare and unprepare request in crypto_engine
is superfluous.  They can be done directly from do_one_request.

Move the code into do_one_request and remove the unused callbacks.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-18 17:01:10 +08:00
Eric Snowberg
4cfb908054 KEYS: DigitalSignature link restriction
Add a new link restriction.  Restrict the addition of keys in a keyring
based on the key having digitalSignature usage set. Additionally, verify
the new certificate against the ones in the system keyrings.  Add two
additional functions to use the new restriction within either the builtin
or secondary keyrings.

[jarkko@kernel.org: Fix checkpatch.pl --strict issues]
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-and-tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-08-17 20:12:20 +00:00
Joachim Vandersmissen
91cb1e1432 crypto: jitter - Add clarifying comments to Jitter Entropy RCT cutoff values
The RCT cutoff values are correct, but they don't exactly match the ones
one would expect when computing them using the formula in SP800-90B. This
discrepancy is due to the fact that the Jitter Entropy RCT starts at 1. To
avoid any confusion by future reviewers, add some comments and explicitly
subtract 1 from the "correct" cutoff values in the definitions.

Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:52 +08:00
Herbert Xu
9ae4577bc0 crypto: api - Use work queue in crypto_destroy_instance
The function crypto_drop_spawn expects to be called in process
context.  However, when an instance is unregistered while it still
has active users, the last user may cause the instance to be freed
in atomic context.

Fix this by delaying the freeing to a work queue.

Fixes: 6bfd48096f ("[CRYPTO] api: Added spawns")
Reported-by: Florent Revest <revest@chromium.org>
Reported-by: syzbot+d769eed29cc42d75e2a3@syzkaller.appspotmail.com
Reported-by: syzbot+610ec0671f51e838436e@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:27 +08:00
Frederick Lawler
6b4b53ca0b crypto: af_alg - Decrement struct key.usage in alg_set_by_key_serial()
Calls to lookup_user_key() require a corresponding key_put() to
decrement the usage counter. Once it reaches zero, we schedule key GC.
Therefore decrement struct key.usage in alg_set_by_key_serial().

Fixes: 7984ceb134 ("crypto: af_alg - Support symmetric encryption via keyring keys")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:27 +08:00
David Howells
6a4b8aa0a9 crypto: af_alg - Fix missing initialisation affecting gcm-aes-s390
Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to point
to the scatterlist array in areq->first_rsgl.sgl.sgl.

Without this, the gcm-aes-s390 driver will oops when it tries to do
gcm_walk_start() on req->dst because req->dst is set to the value of
areq->first_rsgl.sgl.sgl by _aead_recvmsg() calling
aead_request_set_crypt().

The problem comes if an empty ciphertext is passed: the loop in
af_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsgl
up.

This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as far
as I can tell, that ignores req->dst and only uses req->src[*].

[*] Is this a bug in aesni-intel_glue.c?

The s390x oops looks something like:

 Unable to handle kernel pointer dereference in virtual kernel address space
 Failing address: 0000000a00000000 TEID: 0000000a00000803
 Fault in home space mode while using kernel ASCE.
 AS:00000000a43a0007 R3:0000000000000024
 Oops: 003b ilc:2 [#1] SMP
 ...
 Call Trace:
  [<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390]
  [<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8
  [<00000000a2a60888>] aead_recvmsg+0x478/0x698
  [<00000000a2e519a0>] sock_recvmsg+0x70/0xb0
  [<00000000a2e51a56>] sock_read_iter+0x76/0xa0
  [<00000000a273e066>] vfs_read+0x26e/0x2a8
  [<00000000a273e8c4>] ksys_read+0xbc/0x100
  [<00000000a311d808>] __do_syscall+0x1d0/0x1f8
  [<00000000a312ff30>] system_call+0x70/0x98
 Last Breaking-Event-Address:
  [<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390]

Fixes: c1abe6f570 ("crypto: af_alg: Use extract_iter_to_sg() to create scatterlists")
Reported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Link: https://lore.kernel.org/r/CAAUqJDuRkHE8fPgZJGaKjUjd3QfGwzfumuJBmStPqBhubxyk_A@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Sven Schnelle <svens@linux.ibm.com>
cc: Harald Freudenberger <freude@linux.vnet.ibm.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-crypto@vger.kernel.org
cc: linux-s390@vger.kernel.org
cc: regressions@lists.linux.dev
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Ondrej Mosnáček <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04 17:09:26 +08:00
Mahmoud Adam
9f3fa6bc4f KEYS: use kfree_sensitive with key
key might contain private part of the key, so better use
kfree_sensitive to free it

Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28 18:20:25 +08:00
Jiapeng Chong
20508b751b crypto: sig - Remove some unused functions
These functions are defined in the sig.c file, but not called elsewhere,
so delete these unused functions.

crypto/sig.c:24:34: warning: unused function '__crypto_sig_tfm'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5701
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20 22:15:12 +12:00
Azeem Shaikh
babb80b3ec crypto: lrw,xts - Replace strlcpy with strscpy
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-14 18:23:14 +10:00
Gaosheng Cui
31ba6dd229 KEYS: fix kernel-doc warnings in verify_pefile
Fix kernel-doc warnings in verify_pefile:

crypto/asymmetric_keys/verify_pefile.c:423: warning: Excess function
parameter 'trust_keys' description in 'verify_pefile_signature'

crypto/asymmetric_keys/verify_pefile.c:423: warning: Function parameter
or member 'trusted_keys' not described in 'verify_pefile_signature'

Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-14 18:23:14 +10:00
David Howells
0b7ec177b5 crypto: algif_hash - Fix race between MORE and non-MORE sends
The 'MSG_MORE' state of the previous sendmsg() is fetched without the
socket lock held, so two sendmsg calls can race.  This can be seen with a
large sendfile() as that now does a series of sendmsg() calls, and if a
write() comes in on the same socket at an inopportune time, it can flip the
state.

Fix this by moving the fetch of ctx->more inside the socket lock.

Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Reported-by: syzbot+689ec3afb1ef07b766b2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000554b8205ffdea64e@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+689ec3afb1ef07b766b2@syzkaller.appspotmail.com
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Paolo Abeni <pabeni@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-08 22:48:42 +10:00
Dan Carpenter
9e9311e04e KEYS: asymmetric: Fix error codes
These error paths should return the appropriate error codes instead of
returning success.

Fixes: 63ba4d6759 ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-07 14:16:47 +10:00
David Howells
d3dccb0a48 crypto: af_alg - Fix merging of written data into spliced pages
af_alg_sendmsg() takes data-to-be-copied that's provided by write(),
send(), sendmsg() and similar into pages that it allocates and will merge
new data into the last page in the list, based on the value of ctx->merge.

Now that af_alg_sendmsg() accepts MSG_SPLICE_PAGES, it adds spliced pages
directly into the list and then incorrectly appends data to them if there's
space left because ctx->merge says that it can.  This was cleared by
af_alg_sendpage(), but that got lost.

Fix this by skipping the merge if MSG_SPLICE_PAGES is specified and
clearing ctx->merge after MSG_SPLICE_PAGES has added stuff to the list.

Fixes: bf63e250c4 ("crypto: af_alg: Support MSG_SPLICE_PAGES")
Reported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Link: https://lore.kernel.org/r/CAAUqJDvFuvms55Td1c=XKv6epfRnnP78438nZQ-JKyuCptGBiQ@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Paolo Abeni <pabeni@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-05 16:14:24 +08:00
Linus Torvalds
5d95ff84e6 This update includes the following changes:
API:
 
 - Add linear akcipher/sig API.
 - Add tfm cloning (hmac, cmac).
 - Add statesize to crypto_ahash.
 
 Algorithms:
 
 - Allow only odd e and restrict value in FIPS mode for RSA.
 - Replace LFSR with SHA3-256 in jitter.
 - Add interface for gathering of raw entropy in jitter.
 
 Drivers:
 
 - Fix race on data_avail and actual data in hwrng/virtio.
 - Add hash and HMAC support in starfive.
 - Add RSA algo support in starfive.
 - Add support for PCI device 0x156E in ccp.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmSdECcACgkQxycdCkmx
 i6dW3g//a4DR6aaqYF8pU4svAzO56a0Plx3DVHUiJ4ygRB7xOzrQqXjCren6wY2a
 LFuetwxebAhIAPsC79vI+3j8VAIlU9cNVqOxBIJHGY7wFO4m1AjqBjlealzqLrth
 +nEIeUibqLeRw7imOO4adzSsKuSQgyU5rPtKWfrGqqI3RhuMgfWroCtmJ82jmq5l
 uMZgB+aGGkzyXztxubHRPeJ3nOFEzo95SscpJ43lOjMcURRBhEa+20jXDhUGwpI7
 9ycFV31AW+tfkIprAcliiIzZuwIbzlCkte6AxjAVsN100T/wh9JS1Y+uf1P0oZ9y
 AUQQKyc8/QpSkzHZPTncat5P6zta28r8Q5neCvEEEGGuOE8Oc6kb0Os+RE5ANMU4
 2A/zrKGOMIWeEWwXGc51xT3gxyl/Rn5wLw1pW7Lm4d5osGT9jiVXx/g66hKLpagJ
 jegI6CqgvUajkRNi7JPVnSAauu0Ay8O6pU37/8gLOXNGVZBqONpRimk9qB05LNSF
 QYzM2sgYv1tQEmjnG8jLhF5Z8brnqYTv2TZwBX43W10EDQNqUYUDff9Flean5xCb
 +2mxJc81rgtUffnMXyYvQwKLhVKoLpeLR6Ts455S5aP06WAfoyEJyYTA/LHG24GX
 H2HdS9g5y/K15k9yygMWaXgAx7O7MjM9gEa2VQakhnByj/eQM0s=
 =rOLu
 -----END PGP SIGNATURE-----

Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Add linear akcipher/sig API
   - Add tfm cloning (hmac, cmac)
   - Add statesize to crypto_ahash

  Algorithms:
   - Allow only odd e and restrict value in FIPS mode for RSA
   - Replace LFSR with SHA3-256 in jitter
   - Add interface for gathering of raw entropy in jitter

  Drivers:
   - Fix race on data_avail and actual data in hwrng/virtio
   - Add hash and HMAC support in starfive
   - Add RSA algo support in starfive
   - Add support for PCI device 0x156E in ccp"

* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
  crypto: akcipher - Do not copy dst if it is NULL
  crypto: sig - Fix verify call
  crypto: akcipher - Set request tfm on sync path
  crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
  hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
  hwrng: st - keep clock enabled while hwrng is registered
  hwrng: st - support compile-testing
  hwrng: imx-rngc - fix the timeout for init and self check
  KEYS: asymmetric: Use new crypto interface without scatterlists
  KEYS: asymmetric: Move sm2 code into x509_public_key
  KEYS: Add forward declaration in asymmetric-parser.h
  crypto: sig - Add interface for sign/verify
  crypto: akcipher - Add sync interface without SG lists
  crypto: cipher - On clone do crypto_mod_get()
  crypto: api - Add __crypto_alloc_tfmgfp
  crypto: api - Remove crypto_init_ops()
  crypto: rsa - allow only odd e and restrict value in FIPS mode
  crypto: geniv - Split geniv out of AEAD Kconfig option
  crypto: algboss - Add missing dependency on RNG2
  crypto: starfive - Add RSA algo support
  ...
2023-06-30 21:27:13 -07:00
Herbert Xu
486bfb0591 crypto: akcipher - Do not copy dst if it is NULL
As signature verification has a NULL destination buffer, the pointer
needs to be checked before the memcpy is done.

Fixes: addde1f2c9 ("crypto: akcipher - Add sync interface without SG lists")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-27 17:59:52 +08:00
Herbert Xu
891ebfdfa3 crypto: sig - Fix verify call
The dst SG list needs to be set to NULL for verify calls.  Do
this as otherwise the underlying algorithm may fail.

Furthermore the digest needs to be copied just like the source.

Fixes: 6cb8815f41 ("crypto: sig - Add interface for sign/verify")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-27 15:40:24 +08:00
Herbert Xu
767cfee836 crypto: akcipher - Set request tfm on sync path
The request tfm needs to be set.

Fixes: addde1f2c9 ("crypto: akcipher - Add sync interface without SG lists")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202306261421.2ac744fa-oliver.sang@intel.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-27 15:40:24 +08:00
David Howells
dc97391e66 sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)
Remove ->sendpage() and ->sendpage_locked().  sendmsg() with
MSG_SPLICE_PAGES should be used instead.  This allows multiple pages and
multipage folios to be passed through.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: mptcp@lists.linux.dev
cc: rds-devel@oss.oracle.com
cc: tipc-discussion@lists.sourceforge.net
cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24 15:50:13 -07:00
Herbert Xu
63ba4d6759 KEYS: asymmetric: Use new crypto interface without scatterlists
Use the new akcipher and sig interfaces which no longer have
scatterlists in them.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:37 +08:00
Herbert Xu
e5221fa6a3 KEYS: asymmetric: Move sm2 code into x509_public_key
The sm2 certificate requires a modified digest.  Move the code
for the hashing from the signature verification path into the
code where we generate the digest.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:37 +08:00
Herbert Xu
6cb8815f41 crypto: sig - Add interface for sign/verify
Split out the sign/verify functionality from the existing akcipher
interface.  Most algorithms in akcipher either support encryption
and decryption, or signing and verify.  Only one supports both.

As a signature algorithm may not support encryption at all, these
two should be spearated.

For now sig is simply a wrapper around akcipher as all algorithms
remain unchanged.  This is a first step and allows users to start
allocating sig instead of akcipher.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Herbert Xu
addde1f2c9 crypto: akcipher - Add sync interface without SG lists
The only user of akcipher does not use SG lists.  Therefore forcing
users to use SG lists only results unnecessary overhead.  Add a new
interface that supports arbitrary kernel pointers.

For the time being the copy will be performed unconditionally.  But
this will go away once the underlying interface is updated.

Note also that only encryption and decryption is addressed by this
patch as sign/verify will go into a new interface (sig).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Dmitry Safonov
9979c6e55d crypto: cipher - On clone do crypto_mod_get()
The refcounter of underlying algorithm should be incremented, otherwise
it'll be destroyed with the cloned cipher, wrecking the original cipher.

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Herbert Xu
fa3b3565f3 crypto: api - Add __crypto_alloc_tfmgfp
Use it straight away in crypto_clone_cipher(), as that is not meant to
sleep.

Fixes: 51d8d6d0f4 ("crypto: cipher - Add crypto_clone_cipher")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Dmitry Safonov
fa919f9e88 crypto: api - Remove crypto_init_ops()
Purge crypto_type::init() as well.
The last user seems to be gone with commit d63007eb95 ("crypto:
ablkcipher - remove deprecated and unused ablkcipher support").

Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Mahmoud Adam
6637e11e4a crypto: rsa - allow only odd e and restrict value in FIPS mode
check if rsa public exponent is odd and check its value is between
2^16 < e < 2^256.

FIPS 186-5 DSS (page 35)[1] specify that:
1. The public exponent e shall be selected with the following constraints:
  (a) The public verification exponent e shall be selected prior to
  generating the primes, p and q, and the private signature exponent
  d.
  (b) The exponent e shall be an odd positive integer such that:
   2^16 < e < 2^256.

[1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-5.pdf

Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Herbert Xu
ba51738fa7 crypto: geniv - Split geniv out of AEAD Kconfig option
Give geniv its own Kconfig option so that its dependencies are
distinct from that of the AEAD API code.  This also allows it
to be disabled if no IV generators (seqiv/echainiv) are enabled.

Remove the obsolete select on RNG2 by SKCIPHER2 as skcipher IV
generators disappeared long ago.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
Herbert Xu
fb28fabfad crypto: algboss - Add missing dependency on RNG2
The testmgr code uses crypto_rng without depending on it.  Add
an explicit dependency to Kconfig.

Also sort the MANAGER2 dependencies alphabetically.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-23 16:15:36 +08:00
David Howells
b6d972f689 crypto: af_alg/hash: Fix recvmsg() after sendmsg(MSG_MORE)
If an AF_ALG socket bound to a hashing algorithm is sent a zero-length
message with MSG_MORE set and then recvmsg() is called without first
sending another message without MSG_MORE set to end the operation, an oops
will occur because the crypto context and result doesn't now get set up in
advance because hash_sendmsg() now defers that as long as possible in the
hope that it can use crypto_ahash_digest() - and then because the message
is zero-length, it the data wrangling loop is skipped.

Fix this by handling zero-length sends at the top of the hash_sendmsg()
function.  If we're not continuing the previous sendmsg(), then just ignore
the send (hash_recvmsg() will invent something when called); if we are
continuing, then we finalise the request at this point if MSG_MORE is not
set to get any error here, otherwise the send is of no effect and can be
ignored.

Whilst we're at it, remove the code to create a kvmalloc'd scatterlist if
we get more than ALG_MAX_PAGES - this shouldn't happen.

Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Reported-by: syzbot+13a08c0bf4d212766c3c@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b928f705fdeb873a@google.com/
Reported-by: syzbot+14234ccf6d0ef629ec1a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000c047db05fdeb8790@google.com/
Reported-by: syzbot+4e2e47f32607d0f72d43@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000bcca3205fdeb87fb@google.com/
Reported-by: syzbot+472626bb5e7c59fb768f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b55d8805fdeb8385@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-and-tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/427646.1686913832@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20 12:10:36 -07:00
David Howells
4380499218 crypto: Fix af_alg_sendmsg(MSG_SPLICE_PAGES) sglist limit
When af_alg_sendmsg() calls extract_iter_to_sg(), it passes MAX_SGL_ENTS as
the maximum number of elements that may be written to, but some of the
elements may already have been used (as recorded in sgl->cur), so
extract_iter_to_sg() may end up overrunning the scatterlist.

Fix this to limit the number of elements to "MAX_SGL_ENTS - sgl->cur".

Note: It probably makes sense in future to alter the behaviour of
extract_iter_to_sg() to stop if "sgtable->nents >= sg_max" instead, but
this is a smaller fix for now.

The bug causes errors looking something like:

BUG: KASAN: slab-out-of-bounds in sg_assign_page include/linux/scatterlist.h:109 [inline]
BUG: KASAN: slab-out-of-bounds in sg_set_page include/linux/scatterlist.h:139 [inline]
BUG: KASAN: slab-out-of-bounds in extract_bvec_to_sg lib/scatterlist.c:1183 [inline]
BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg lib/scatterlist.c:1352 [inline]
BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg+0x17a6/0x1960 lib/scatterlist.c:1339

Fixes: bf63e250c4 ("crypto: af_alg: Support MSG_SPLICE_PAGES")
Reported-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b2585a05fdeb8379@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18 14:26:21 +01:00
Franziska Naepelt
f75bd28beb crypto: hmac - Add missing blank line
The following checkpatch warning has been fixed:
- WARNING: Missing a blank line after declarations

Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-16 20:30:35 +08:00
David Howells
345ee3e812 algif: Remove hash_sendpage*()
Remove hash_sendpage*() as nothing should now call it since the rewrite of
splice_to_socket()[1].

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=2dc334f1a63a8839b88483a3e73c0f27c9c1791c [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12 21:13:23 -07:00
Jakub Kicinski
449f6bc17a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/sch_taprio.c
  d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
  dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")

net/ipv4/sysctl_net_ipv4.c
  e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
  ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08 11:35:14 -07:00
David Howells
c662b043cd crypto: af_alg/hash: Support MSG_SPLICE_PAGES
Make AF_ALG sendmsg() support MSG_SPLICE_PAGES in the hashing code.  This
causes pages to be spliced from the source iterator if possible.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
David Howells
fb800fa4c1 crypto: af_alg: Convert af_alg_sendpage() to use MSG_SPLICE_PAGES
Convert af_alg_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather
than directly splicing in the pages itself.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
David Howells
bf63e250c4 crypto: af_alg: Support MSG_SPLICE_PAGES
Make AF_ALG sendmsg() support MSG_SPLICE_PAGES.  This causes pages to be
spliced from the source iterator.

This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
David Howells
73d7409cfd crypto: af_alg: Indent the loop in af_alg_sendmsg()
Put the loop in af_alg_sendmsg() into an if-statement to indent it to make
the next patch easier to review as that will add another branch to handle
MSG_SPLICE_PAGES to the if-statement.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
David Howells
c1abe6f570 crypto: af_alg: Use extract_iter_to_sg() to create scatterlists
Use extract_iter_to_sg() to decant the destination iterator into a
scatterlist in af_alg_get_rsgl().  af_alg_make_sg() can then be removed.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
David Howells
f9e7a5fa51 crypto: af_alg: Pin pages rather than ref'ing if appropriate
Convert AF_ALG to use iov_iter_extract_pages() instead of
iov_iter_get_pages().  This will pin pages or leave them unaltered rather
than getting a ref on them as appropriate to the iterator.

The pages need to be pinned for DIO-read rather than having refs taken on
them to prevent VM copy-on-write from malfunctioning during a concurrent
fork() (the result of the I/O would otherwise end up only visible to the
child process and not the parent).

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08 13:42:34 +02:00
Roberto Sassu
c3d03e8e35 KEYS: asymmetric: Copy sig and digest in public_key_verify_signature()
Commit ac4e97abce ("scatterlist: sg_set_buf() argument must be in linear
mapping") checks that both the signature and the digest reside in the
linear mapping area.

However, more recently commit ba14a194a4 ("fork: Add generic vmalloced
stack support") made it possible to move the stack in the vmalloc area,
which is not contiguous, and thus not suitable for sg_set_buf() which needs
adjacent pages.

Always make a copy of the signature and digest in the same buffer used to
store the key and its parameters, and pass them to sg_init_one(). Prefer it
to conditionally doing the copy if necessary, to keep the code simple. The
buffer allocated with kmalloc() is in the linear mapping area.

Cc: stable@vger.kernel.org # 4.9.x
Fixes: ba14a194a4 ("fork: Add generic vmalloced stack support")
Link: https://lore.kernel.org/linux-integrity/Y4pIpxbjBdajymBJ@sol.localdomain/
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
2023-06-02 15:36:23 +02:00
Stephan Müller
d23659769a crypto: jitter - correct health test during initialization
With the update of the permanent and intermittent health errors, the
actual indicator for the health test indicates a potential error only
for the one offending time stamp gathered in the current iteration
round. The next iteration round will "overwrite" the health test result.

Thus, the entropy collection loop in jent_gen_entropy checks for
the health test failure upon each loop iteration. However, the
initialization operation checked for the APT health test once for
an APT window which implies it would not catch most errors.

Thus, the check for all health errors is now invoked unconditionally
during each loop iteration for the startup test.

With the change, the error JENT_ERCT becomes unused as all health
errors are only reported with the JENT_HEALTH return code. This
allows the removal of the error indicator.

Fixes: 3fde2fe99a ("crypto: jitter - permanent and intermittent health errors"
)
Reported-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-06-02 18:21:32 +08:00
Eric Biggers
66dd59b7aa crypto: Kconfig - warn about performance overhead of CRYPTO_STATS
Make the help text for CRYPTO_STATS explicitly mention that it reduces
the performance of the crypto API.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Herbert Xu
b7be31b0d5 crypto: shash - Allow cloning on algorithms with no init_tfm
Some shash algorithms are so simple that they don't have an init_tfm
function.  These can be cloned trivially.  Check this before failing
in crypto_clone_shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Herbert Xu
ed51bba18f crypto: cmac - Add support for cloning
Allow cmac to be cloned.  The underlying cipher needs to support
cloning by not having a cra_init function (all implementations of
aes that do not require a fallback can be cloned).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Herbert Xu
51d8d6d0f4 crypto: cipher - Add crypto_clone_cipher
Allow simple ciphers to be cloned, if they don't have a cra_init
function.  This basically rules out those ciphers that require a
fallback.

In future simple ciphers will be eliminated, and replaced with a
linear skcipher interface.  When that happens this restriction will
disappear.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Herbert Xu
cf2eddc931 crypto: cmac - Use modern init_tfm/exit_tfm
Use the modern init_tfm/exit_tfm interface instead of the obsolete
cra_init/cra_exit interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Arnd Bergmann
4e3901fa84 crypto: aegis128-neon - add header for internal prototypes
gcc warns if prototypes are only visible to the caller but
not the callee:

crypto/aegis128-neon-inner.c:134:6: warning: no previous prototype for 'crypto_aegis128_init_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:164:6: warning: no previous prototype for 'crypto_aegis128_update_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:221:6: warning: no previous prototype for 'crypto_aegis128_encrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:270:6: warning: no previous prototype for 'crypto_aegis128_decrypt_chunk_neon' [-Wmissing-prototypes]
crypto/aegis128-neon-inner.c:316:5: warning: no previous prototype for 'crypto_aegis128_final_neon' [-Wmissing-prototypes]

The prototypes cannot be in the regular aegis.h, as the inner neon code
cannot include normal kernel headers. Instead add a new header just for
the functions provided by this file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-24 18:12:33 +08:00
Stephan Müller
69f1c387ba crypto: jitter - add interface for gathering of raw entropy
The test interface allows a privileged process to capture the raw
unconditioned noise that is collected by the Jitter RNG for statistical
analysis. Such testing allows the analysis how much entropy
the Jitter RNG noise source provides on a given platform. The obtained
data is the time stamp sampled by the Jitter RNG. Considering that
the Jitter RNG inserts the delta of this time stamp compared to the
immediately preceding time stamp, the obtained data needs to be
post-processed accordingly to obtain the data the Jitter RNG inserts
into its entropy pool.

The raw entropy collection is provided to obtain the raw unmodified
time stamps that are about to be added to the Jitter RNG entropy pool
and are credited with entropy. Thus, this patch adds an interface
which renders the Jitter RNG insecure. This patch is NOT INTENDED
FOR PRODUCTION SYSTEMS, but solely for development/test systems to
verify the available entropy rate.

Access to the data is given through the jent_raw_hires debugfs file.
The data buffer should be multiples of sizeof(u32) to fill the entire
buffer. Using the option jitterentropy_testing.boot_raw_hires_test=1
the raw noise of the first 1000 entropy events since boot can be
sampled.

This test interface allows generating the data required for
analysis whether the Jitter RNG is in compliance with SP800-90B
sections 3.1.3 and 3.1.4.

If the test interface is not compiled, its code is a noop which has no
impact on the performance.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-12 18:48:01 +08:00
Stephan Müller
bb897c5504 crypto: jitter - replace LFSR with SHA3-256
Using the kernel crypto API, the SHA3-256 algorithm is used as
conditioning element to replace the LFSR in the Jitter RNG. All other
parts of the Jitter RNG are unchanged.

The application and use of the SHA-3 conditioning operation is identical
to the user space Jitter RNG 3.4.0 by applying the following concept:

- the Jitter RNG initializes a SHA-3 state which acts as the "entropy
  pool" when the Jitter RNG is allocated.

- When a new time delta is obtained, it is inserted into the "entropy
  pool" with a SHA-3 update operation. Note, this operation in most of
  the cases is a simple memcpy() onto the SHA-3 stack.

- To cause a true SHA-3 operation for each time delta operation, a
  second SHA-3 operation is performed hashing Jitter RNG status
  information. The final message digest is also inserted into the
  "entropy pool" with a SHA-3 update operation. Yet, this data is not
  considered to provide any entropy, but it shall stir the entropy pool.

- To generate a random number, a SHA-3 final operation is performed to
  calculate a message digest followed by an immediate SHA-3 init to
  re-initialize the "entropy pool". The obtained message digest is one
  block of the Jitter RNG that is returned to the caller.

Mathematically speaking, the random number generated by the Jitter RNG
is:

aux_t = SHA-3(Jitter RNG state data)

Jitter RNG block = SHA-3(time_i || aux_i || time_(i-1) || aux_(i-1) ||
                         ... || time_(i-255) || aux_(i-255))

when assuming that the OSR = 1, i.e. the default value.

This operation implies that the Jitter RNG has an output-blocksize of
256 bits instead of the 64 bits of the LFSR-based Jitter RNG that is
replaced with this patch.

The patch also replaces the varying number of invocations of the
conditioning function with one fixed number of invocations. The use
of the conditioning function consistent with the userspace Jitter RNG
library version 3.4.0.

The code is tested with a system that exhibited the least amount of
entropy generated by the Jitter RNG: the SiFive Unmatched RISC-V
system. The measured entropy rate is well above the heuristically
implied entropy value of 1 bit of entropy per time delta. On all other
tested systems, the measured entropy rate is even higher by orders
of magnitude. The measurement was performed using updated tooling
provided with the user space Jitter RNG library test framework.

The performance of the Jitter RNG with this patch is about en par
with the performance of the Jitter RNG without the patch.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-12 18:48:01 +08:00
Herbert Xu
3908edf868 crypto: hash - Make crypto_ahash_alg helper available
Move the crypto_ahash_alg helper into include/crypto/internal so
that drivers can use it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-12 18:48:01 +08:00
Herbert Xu
c7535fb2dd crypto: hash - Add statesize to crypto_ahash
As ahash drivers may need to use fallbacks, their state size
is thus variable.  Deal with this by making it an attribute
of crypto_ahash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-12 18:48:01 +08:00
Linus Torvalds
6f69c98181 This push fixes the following problems:
- A long-standing bug in crypto_engine.
 - A buggy but harmless check in the sun8i-ss driver.
 - A regression in the CRYPTO_USER interface.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmRQ5RgACgkQxycdCkmx
 i6dA1hAAsdP9Nx6d1ux0KYCI9FsnjU06JITzEA/LmzMXqxfElUzatZswaQuE8gSd
 SoUNuWk5PiKEK5BIJRdKNyKc+kElxCewknEbpvbHi3QGs/BZyfPuDf17gPnNaxsA
 KxA2WLU9XBaI0mt44mPuX5aLlCMnJ/RFhi7I5lJ3H31V6FU75BVE3DOCSxZNNipN
 eWfG1c2f3K9Q0Qc3CSxUkzvNKTy+YW+i/fwdisToX2Zj/jduWmUi8PcbQQIX5+PX
 Dch1LxnTu/l+Dn5PBICmhK8B86oTTCF83FOYX2f7ng4YuZ95gN/gn3/s5U4UkkKl
 n74rupfhKkUHFeWS93ToC0qKniuN+QuPA8GumBFYjywn2gA7CS1BSV3+++ryJxRO
 q9RXtHU7R7IXQGn5IKCqwzcBHrtnxUlIptMV2VH3Sbixtzn5QW0m10/lHHNKIy5E
 laXr+dr+uBcL5+mSDYvsRbaQxfQ9G5wGvelnl7c1hXEG1VV6O5pVXLTlw81U7K3u
 38m7dQl1/A3IetYpMrFcqhiGt0T84ttJerLaQRLNZCeNSAB70Gq/eSSSK4uyHl7I
 pVb2eiLE84NCUZfemD8CER9Zv6z+kFDEO6xpLeBOd6BAzfYJXaTaquLnERh/bduo
 WXnGlrDv6W+N+w4nP6AQ711mDqP5vMdLeSwbUfJChqeNHmM8nG8=
 =9Us7
 -----END PGP SIGNATURE-----

Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

 - A long-standing bug in crypto_engine

 - A buggy but harmless check in the sun8i-ss driver

 - A regression in the CRYPTO_USER interface

* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: api - Fix CRYPTO_USER checks for report function
  crypto: engine - fix crypto_queue backlog handling
  crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-07 10:57:14 -07:00
Linus Torvalds
611c9d8830 LoongArch changes for v6.4
1, Better backtraces for humanization;
 2, Relay BCE exceptions to userland as SIGSEGV;
 3, Provide kernel fpu functions;
 4, Optimize memory ops (memset/memcpy/memmove);
 5, Optimize checksum and crc32(c) calculation;
 6, Add ARCH_HAS_FORTIFY_SOURCE selection;
 7, Add function error injection support;
 8, Add ftrace with direct call support;
 9, Add basic perf tools support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK
 ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2
 V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3
 mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a
 wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw
 rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE
 wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m
 JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ
 5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE
 jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS
 mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK
 oKYjO+exPyuQ9nSOBg==
 =3aTV
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...
2023-05-04 12:40:16 -07:00
Ondrej Mosnacek
b8969a1b69 crypto: api - Fix CRYPTO_USER checks for report function
Checking the config via ifdef incorrectly compiles out the report
functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED()
instead.

Fixes: c0f9e01dd2 ("crypto: api - Check CRYPTO_USER instead of NET for report")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-05-02 18:22:24 +08:00
Min Zhou
2f16482202 LoongArch: crypto: Add crc32 and crc32c hw acceleration
With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.

LoongArch has provided these instructions to calculate crc32 and crc32c:
        * crc.w.b.w    crcc.w.b.w
        * crc.w.h.w    crcc.w.h.w
        * crc.w.w.w    crcc.w.w.w
        * crc.w.d.w    crcc.w.d.w

So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.

As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.

                  Software implemention    Hardware acceleration
  Buffer size     time cost (seconds)      time cost (seconds)    Accel.
   100 KB                0.000845                 0.000534        59.1%
     1 MB                0.007758                 0.004836        59.4%
    10 MB                0.076593                 0.047682        59.4%
   100 MB                0.756734                 0.479126        58.5%
  1000 MB                7.563841                 4.778266        58.5%

Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-05-01 17:19:43 +08:00
Olivier Bacon
4140aafcff crypto: engine - fix crypto_queue backlog handling
CRYPTO_TFM_REQ_MAY_BACKLOG tells the crypto driver that it should
internally backlog requests until the crypto hw's queue becomes
full. At that point, crypto_engine backlogs the request and returns
-EBUSY. Calling driver such as dm-crypt then waits until the
complete() function is called with a status of -EINPROGRESS before
sending a new request.

The problem lies in the call to complete() with a value of -EINPROGRESS
that is made when a backlog item is present on the queue. The call is
done before the successful execution of the crypto request. In the case
that do_one_request() returns < 0 and the retry support is available,
the request is put back in the queue. This leads upper drivers to send
a new request even if the queue is still full.

The problem can be reproduced by doing a large dd into a crypto
dm-crypt device. This is pretty easy to see when using
Freescale CAAM crypto driver and SWIOTLB dma. Since the actual amount
of requests that can be hold in the queue is unlimited we get IOs error
and dma allocation.

The fix is to call complete with a value of -EINPROGRESS only if
the request is not enqueued back in crypto_queue. This is done
by calling complete() later in the code. In order to delay the decision,
crypto_queue is modified to correctly set the backlog pointer
when a request is enqueued back.

Fixes: 6a89f492f8 ("crypto: engine - support for parallel requests based on retry mechanism")
Co-developed-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Olivier Bacon <obacon@genetec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-28 17:50:43 +08:00
Linus Torvalds
b6a7828502 modules-6.4-rc1
The summary of the changes for this pull requests is:
 
  * Song Liu's new struct module_memory replacement
  * Nick Alcock's MODULE_LICENSE() removal for non-modules
  * My cleanups and enhancements to reduce the areas where we vmalloc
    module memory for duplicates, and the respective debug code which
    proves the remaining vmalloc pressure comes from userspace.
 
 Most of the changes have been in linux-next for quite some time except
 the minor fixes I made to check if a module was already loaded
 prior to allocating the final module memory with vmalloc and the
 respective debug code it introduces to help clarify the issue. Although
 the functional change is small it is rather safe as it can only *help*
 reduce vmalloc space for duplicates and is confirmed to fix a bootup
 issue with over 400 CPUs with KASAN enabled. I don't expect stable
 kernels to pick up that fix as the cleanups would have also had to have
 been picked up. Folks on larger CPU systems with modules will want to
 just upgrade if vmalloc space has been an issue on bootup.
 
 Given the size of this request, here's some more elaborate details
 on this pull request.
 
 The functional change change in this pull request is the very first
 patch from Song Liu which replaces the struct module_layout with a new
 struct module memory. The old data structure tried to put together all
 types of supported module memory types in one data structure, the new
 one abstracts the differences in memory types in a module to allow each
 one to provide their own set of details. This paves the way in the
 future so we can deal with them in a cleaner way. If you look at changes
 they also provide a nice cleanup of how we handle these different memory
 areas in a module. This change has been in linux-next since before the
 merge window opened for v6.3 so to provide more than a full kernel cycle
 of testing. It's a good thing as quite a bit of fixes have been found
 for it.
 
 Jason Baron then made dynamic debug a first class citizen module user by
 using module notifier callbacks to allocate / remove module specific
 dynamic debug information.
 
 Nick Alcock has done quite a bit of work cross-tree to remove module
 license tags from things which cannot possibly be module at my request
 so to:
 
   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area
      is active with no clear solution in sight.
 
   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags
 
 In so far as a) is concerned, although module license tags are a no-op
 for non-modules, tools which would want create a mapping of possible
 modules can only rely on the module license tag after the commit
 8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
 or tristate.conf").  Nick has been working on this *for years* and
 AFAICT I was the only one to suggest two alternatives to this approach
 for tooling. The complexity in one of my suggested approaches lies in
 that we'd need a possible-obj-m and a could-be-module which would check
 if the object being built is part of any kconfig build which could ever
 lead to it being part of a module, and if so define a new define
 -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
 suggested would be to have a tristate in kconfig imply the same new
 -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
 mapping to modules always, and I don't think that's the case today. I am
 not aware of Nick or anyone exploring either of these options. Quite
 recently Josh Poimboeuf has pointed out that live patching, kprobes and
 BPF would benefit from resolving some part of the disambiguation as
 well but for other reasons. The function granularity KASLR (fgkaslr)
 patches were mentioned but Joe Lawrence has clarified this effort has
 been dropped with no clear solution in sight [1].
 
 In the meantime removing module license tags from code which could never
 be modules is welcomed for both objectives mentioned above. Some
 developers have also welcomed these changes as it has helped clarify
 when a module was never possible and they forgot to clean this up,
 and so you'll see quite a bit of Nick's patches in other pull
 requests for this merge window. I just picked up the stragglers after
 rc3. LWN has good coverage on the motivation behind this work [2] and
 the typical cross-tree issues he ran into along the way. The only
 concrete blocker issue he ran into was that we should not remove the
 MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
 they can never be modules. Nick ended up giving up on his efforts due
 to having to do this vetting and backlash he ran into from folks who
 really did *not understand* the core of the issue nor were providing
 any alternative / guidance. I've gone through his changes and dropped
 the patches which dropped the module license tags where an SPDX
 license tag was missing, it only consisted of 11 drivers.  To see
 if a pull request deals with a file which lacks SPDX tags you
 can just use:
 
   ./scripts/spdxcheck.py -f \
 	$(git diff --name-only commid-id | xargs echo)
 
 You'll see a core module file in this pull request for the above,
 but that's not related to his changes. WE just need to add the SPDX
 license tag for the kernel/module/kmod.c file in the future but
 it demonstrates the effectiveness of the script.
 
 Most of Nick's changes were spread out through different trees,
 and I just picked up the slack after rc3 for the last kernel was out.
 Those changes have been in linux-next for over two weeks.
 
 The cleanups, debug code I added and final fix I added for modules
 were motivated by David Hildenbrand's report of boot failing on
 a systems with over 400 CPUs when KASAN was enabled due to running
 out of virtual memory space. Although the functional change only
 consists of 3 lines in the patch "module: avoid allocation if module is
 already present and ready", proving that this was the best we can
 do on the modules side took quite a bit of effort and new debug code.
 
 The initial cleanups I did on the modules side of things has been
 in linux-next since around rc3 of the last kernel, the actual final
 fix for and debug code however have only been in linux-next for about a
 week or so but I think it is worth getting that code in for this merge
 window as it does help fix / prove / evaluate the issues reported
 with larger number of CPUs. Userspace is not yet fixed as it is taking
 a bit of time for folks to understand the crux of the issue and find a
 proper resolution. Worst come to worst, I have a kludge-of-concept [3]
 of how to make kernel_read*() calls for modules unique / converge them,
 but I'm currently inclined to just see if userspace can fix this
 instead.
 
 [0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
 [1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
 [2] https://lwn.net/Articles/927569/
 [3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRG4m0SHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinQ2oP/0xlvKwJg6Ey8fHZF0qv8VOskE80zoLF
 hMazU3xfqLA+1TQvouW1YBxt3jwS3t1Ehs+NrV+nY9Yzcm0MzRX/n3fASJVe7nRr
 oqWWQU+voYl5Pw1xsfdp6C8IXpBQorpYby3Vp0MAMoZyl2W2YrNo36NV488wM9KC
 jD4HF5Z6xpnPSZTRR7AgW9mo7FdAtxPeKJ76Bch7lH8U6omT7n36WqTw+5B1eAYU
 YTOvrjRs294oqmWE+LeebyiOOXhH/yEYx4JNQgCwPdxwnRiGJWKsk5va0hRApqF/
 WW8dIqdEnjsa84lCuxnmWgbcPK8cgmlO0rT0DyneACCldNlldCW1LJ0HOwLk9pea
 p3JFAsBL7TKue4Tos6I7/4rx1ufyBGGIigqw9/VX5g0Iif+3BhWnqKRfz+p9wiMa
 Fl7cU6u7yC68CHu1HBSisK16cYMCPeOnTSd89upHj8JU/t74O6k/ARvjrQ9qmNUt
 c5U+OY+WpNJ1nXQydhY/yIDhFdYg8SSpNuIO90r4L8/8jRQYXNG80FDd1UtvVDuy
 eq0r2yZ8C0XHSlOT9QHaua/tWV/aaKtyC/c0hDRrigfUrq8UOlGujMXbUnrmrWJI
 tLJLAc7ePWAAoZXGSHrt0U27l029GzLwRdKqJ6kkDANVnTeOdV+mmBg9zGh3/Mp6
 agiwdHUMVN7X
 =56WK
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull module updates from Luis Chamberlain:
 "The summary of the changes for this pull requests is:

   - Song Liu's new struct module_memory replacement

   - Nick Alcock's MODULE_LICENSE() removal for non-modules

   - My cleanups and enhancements to reduce the areas where we vmalloc
     module memory for duplicates, and the respective debug code which
     proves the remaining vmalloc pressure comes from userspace.

  Most of the changes have been in linux-next for quite some time except
  the minor fixes I made to check if a module was already loaded prior
  to allocating the final module memory with vmalloc and the respective
  debug code it introduces to help clarify the issue. Although the
  functional change is small it is rather safe as it can only *help*
  reduce vmalloc space for duplicates and is confirmed to fix a bootup
  issue with over 400 CPUs with KASAN enabled. I don't expect stable
  kernels to pick up that fix as the cleanups would have also had to
  have been picked up. Folks on larger CPU systems with modules will
  want to just upgrade if vmalloc space has been an issue on bootup.

  Given the size of this request, here's some more elaborate details:

  The functional change change in this pull request is the very first
  patch from Song Liu which replaces the 'struct module_layout' with a
  new 'struct module_memory'. The old data structure tried to put
  together all types of supported module memory types in one data
  structure, the new one abstracts the differences in memory types in a
  module to allow each one to provide their own set of details. This
  paves the way in the future so we can deal with them in a cleaner way.
  If you look at changes they also provide a nice cleanup of how we
  handle these different memory areas in a module. This change has been
  in linux-next since before the merge window opened for v6.3 so to
  provide more than a full kernel cycle of testing. It's a good thing as
  quite a bit of fixes have been found for it.

  Jason Baron then made dynamic debug a first class citizen module user
  by using module notifier callbacks to allocate / remove module
  specific dynamic debug information.

  Nick Alcock has done quite a bit of work cross-tree to remove module
  license tags from things which cannot possibly be module at my request
  so to:

   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area is
      active with no clear solution in sight.

   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags

  In so far as a) is concerned, although module license tags are a no-op
  for non-modules, tools which would want create a mapping of possible
  modules can only rely on the module license tag after the commit
  8b41fc4454 ("kbuild: create modules.builtin without
  Makefile.modbuiltin or tristate.conf").

  Nick has been working on this *for years* and AFAICT I was the only
  one to suggest two alternatives to this approach for tooling. The
  complexity in one of my suggested approaches lies in that we'd need a
  possible-obj-m and a could-be-module which would check if the object
  being built is part of any kconfig build which could ever lead to it
  being part of a module, and if so define a new define
  -DPOSSIBLE_MODULE [0].

  A more obvious yet theoretical approach I've suggested would be to
  have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
  well but that means getting kconfig symbol names mapping to modules
  always, and I don't think that's the case today. I am not aware of
  Nick or anyone exploring either of these options. Quite recently Josh
  Poimboeuf has pointed out that live patching, kprobes and BPF would
  benefit from resolving some part of the disambiguation as well but for
  other reasons. The function granularity KASLR (fgkaslr) patches were
  mentioned but Joe Lawrence has clarified this effort has been dropped
  with no clear solution in sight [1].

  In the meantime removing module license tags from code which could
  never be modules is welcomed for both objectives mentioned above. Some
  developers have also welcomed these changes as it has helped clarify
  when a module was never possible and they forgot to clean this up, and
  so you'll see quite a bit of Nick's patches in other pull requests for
  this merge window. I just picked up the stragglers after rc3. LWN has
  good coverage on the motivation behind this work [2] and the typical
  cross-tree issues he ran into along the way. The only concrete blocker
  issue he ran into was that we should not remove the MODULE_LICENSE()
  tags from files which have no SPDX tags yet, even if they can never be
  modules. Nick ended up giving up on his efforts due to having to do
  this vetting and backlash he ran into from folks who really did *not
  understand* the core of the issue nor were providing any alternative /
  guidance. I've gone through his changes and dropped the patches which
  dropped the module license tags where an SPDX license tag was missing,
  it only consisted of 11 drivers. To see if a pull request deals with a
  file which lacks SPDX tags you can just use:

    ./scripts/spdxcheck.py -f \
	$(git diff --name-only commid-id | xargs echo)

  You'll see a core module file in this pull request for the above, but
  that's not related to his changes. WE just need to add the SPDX
  license tag for the kernel/module/kmod.c file in the future but it
  demonstrates the effectiveness of the script.

  Most of Nick's changes were spread out through different trees, and I
  just picked up the slack after rc3 for the last kernel was out. Those
  changes have been in linux-next for over two weeks.

  The cleanups, debug code I added and final fix I added for modules
  were motivated by David Hildenbrand's report of boot failing on a
  systems with over 400 CPUs when KASAN was enabled due to running out
  of virtual memory space. Although the functional change only consists
  of 3 lines in the patch "module: avoid allocation if module is already
  present and ready", proving that this was the best we can do on the
  modules side took quite a bit of effort and new debug code.

  The initial cleanups I did on the modules side of things has been in
  linux-next since around rc3 of the last kernel, the actual final fix
  for and debug code however have only been in linux-next for about a
  week or so but I think it is worth getting that code in for this merge
  window as it does help fix / prove / evaluate the issues reported with
  larger number of CPUs. Userspace is not yet fixed as it is taking a
  bit of time for folks to understand the crux of the issue and find a
  proper resolution. Worst come to worst, I have a kludge-of-concept [3]
  of how to make kernel_read*() calls for modules unique / converge
  them, but I'm currently inclined to just see if userspace can fix this
  instead"

Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]

* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
  module: add debugging auto-load duplicate module support
  module: stats: fix invalid_mod_bytes typo
  module: remove use of uninitialized variable len
  module: fix building stats for 32-bit targets
  module: stats: include uapi/linux/module.h
  module: avoid allocation if module is already present and ready
  module: add debug stats to help identify memory pressure
  module: extract patient module check into helper
  modules/kmod: replace implementation with a semaphore
  Change DEFINE_SEMAPHORE() to take a number argument
  module: fix kmemleak annotations for non init ELF sections
  module: Ignore L0 and rename is_arm_mapping_symbol()
  module: Move is_arm_mapping_symbol() to module_symbol.h
  module: Sync code of is_arm_mapping_symbol()
  scripts/gdb: use mem instead of core_layout to get the module address
  interconnect: remove module-related code
  interconnect: remove MODULE_LICENSE in non-modules
  zswap: remove MODULE_LICENSE in non-modules
  zpool: remove MODULE_LICENSE in non-modules
  x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
  ...
2023-04-27 16:36:55 -07:00
Linus Torvalds
733f7e9c18 This update includes the following changes:
API:
 
 - Total usage stats now include all that returned error (instead of some).
 - Remove maximum hash statesize limit.
 - Add cloning support for hmac and unkeyed hashes.
 - Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
 
 Algorithms:
 
 - Use RIP-relative addressing on x86 to prepare for PIE build.
 - Add accelerated AES/GCM stitched implementation on powerpc P10.
 - Add some test vectors for cmac(camellia).
 - Remove failure case where jent is unavailable outside of FIPS mode in drbg.
 - Add permanent and intermittent health error checks in jitter RNG.
 
 Drivers:
 
 - Add support for 402xx devices in qat.
 - Add support for HiSTB TRNG.
 - Fix hash concurrency issues in stm32.
 - Add OP-TEE firmware support in caam.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmRGCjcACgkQxycdCkmx
 i6d6JA//ZmwgEqAKA8qWpHnNKZylTLqFhLxnKZwr4Hhp1KzManh/T9pepXiD2zAY
 D92wU60v0hfGAazeUWQRmrIZxcjyd3b3Tr7WiFuNoZbkPsuXWZAoz8iHgMq69dqb
 DXZhKJnlmVlcr+qTSk9MP8HODL5kU6Ug2pk+r8hL/WsBI+JGfZEXKcJhhMqYLYls
 nl+NN4fkE5tgcTh2lp/9dQsQRylhESZuqb8L2wItQmripSbhPGwYf24I7B7xcGrn
 o7X4XG//cQO6zQErgnOJOosIgJEEynW27CN4ZiHB8WhRAk0YLXydQBs6EjZgNA8H
 EvZC/bIx2YOt8ngG99q4kRg4OgKp4c7UnV6l1pxuJWbIyXrFh4djxHdq9pTYr3UB
 P3pVEX38Wu7U5Tfgy3y1QqZzsvrPjmnI3NQ8QBrcFzNRDan5K6nH4kQyk9Cv7LQm
 GlE1JOThU5U2G33ZWKCluJUjVUCRceMWQYla1X5R4uWMCwSqRMpmx8Ib9QvbYlWe
 iUI+RatLnlIobx+lgaC8mtij9dQddFjk6YwFYhQcD3Bl30DhTeIlbnOUY9YOTXps
 H6V9X2inVUjyZr1uJ4a7rPdCUuzQxR6HWPyp6fXMlbLrEhL8e6c4/QbEoTubRQeS
 WTtoIFt4ezd2SG6hI6dTCscgFc5EAyEMDD5GtQmJeyozu0Gqtpo=
 =ITkW
 -----END PGP SIGNATURE-----

Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Total usage stats now include all that returned errors (instead of
     just some)
   - Remove maximum hash statesize limit
   - Add cloning support for hmac and unkeyed hashes
   - Demote BUG_ON in crypto_unregister_alg to a WARN_ON

  Algorithms:
   - Use RIP-relative addressing on x86 to prepare for PIE build
   - Add accelerated AES/GCM stitched implementation on powerpc P10
   - Add some test vectors for cmac(camellia)
   - Remove failure case where jent is unavailable outside of FIPS mode
     in drbg
   - Add permanent and intermittent health error checks in jitter RNG

  Drivers:
   - Add support for 402xx devices in qat
   - Add support for HiSTB TRNG
   - Fix hash concurrency issues in stm32
   - Add OP-TEE firmware support in caam"

* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
  i2c: designware: Add doorbell support for Mendocino
  i2c: designware: Use PCI PSP driver for communication
  powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
  crypto: p10-aes-gcm - Remove POWER10_CPU dependency
  crypto: testmgr - Add some test vectors for cmac(camellia)
  crypto: cryptd - Add support for cloning hashes
  crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
  crypto: hmac - Add support for cloning
  crypto: hash - Add crypto_clone_ahash/shash
  crypto: api - Add crypto_clone_tfm
  crypto: api - Add crypto_tfm_get
  crypto: x86/sha - Use local .L symbols for code
  crypto: x86/crc32 - Use local .L symbols for code
  crypto: x86/aesni - Use local .L symbols for code
  crypto: x86/sha256 - Use RIP-relative addressing
  crypto: x86/ghash - Use RIP-relative addressing
  crypto: x86/des3 - Use RIP-relative addressing
  crypto: x86/crc32c - Use RIP-relative addressing
  crypto: x86/cast6 - Use RIP-relative addressing
  crypto: x86/cast5 - Use RIP-relative addressing
  ...
2023-04-26 08:32:52 -07:00
Eric Snowberg
099f26f22f integrity: machine keyring CA configuration
Add machine keyring CA restriction options to control the type of
keys that may be added to it. The motivation is separation of
certificate signing from code signing keys. Subsquent work will
limit certificates being loaded into the IMA keyring to code
signing keys used for signature verification.

When no restrictions are selected, all Machine Owner Keys (MOK) are added
to the machine keyring.  When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is
selected, the CA bit must be true.  Also the key usage must contain
keyCertSign, any other usage field may be set as well.

When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must
be true. Also the key usage must contain keyCertSign and the
digitialSignature usage may not be set.

Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24 16:15:53 +03:00
Eric Snowberg
76adb2fbc6 KEYS: CA link restriction
Add a new link restriction.  Restrict the addition of keys in a keyring
based on the key to be added being a CA.

Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24 16:15:53 +03:00
Eric Snowberg
567671281a KEYS: X.509: Parse Key Usage
Parse the X.509 Key Usage.  The key usage extension defines the purpose of
the key contained in the certificate.

   id-ce-keyUsage OBJECT IDENTIFIER ::=  { id-ce 15 }

      KeyUsage ::= BIT STRING {
           digitalSignature        (0),
           contentCommitment       (1),
           keyEncipherment         (2),
           dataEncipherment        (3),
           keyAgreement            (4),
           keyCertSign             (5),
           cRLSign                 (6),
           encipherOnly            (7),
           decipherOnly            (8) }

If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.

Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24 16:15:53 +03:00
Eric Snowberg
30eae2b037 KEYS: X.509: Parse Basic Constraints for CA
Parse the X.509 Basic Constraints.  The basic constraints extension
identifies whether the subject of the certificate is a CA.

BasicConstraints ::= SEQUENCE {
        cA                      BOOLEAN DEFAULT FALSE,
        pathLenConstraint       INTEGER (0..MAX) OPTIONAL }

If the CA is true, store it in the public_key.  This will be used
in a follow on patch that requires knowing if the public key is a CA.

Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24 16:15:53 +03:00
David Howells
ba24b8eb3e crypto: testmgr - Add some test vectors for cmac(camellia)
Add some test vectors for 128-bit cmac(camellia) as found in
draft-kato-ipsec-camellia-cmac96and128-01 section 6.2.

The document also shows vectors for camellia-cmac-96, and for VK with a
length greater than 16, but I'm not sure how to express those in testmgr.

This also leaves cts(cbc(camellia)) untested, but I can't seem to find any
tests for that that I could put into testmgr.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
cfbda734d6 crypto: cryptd - Add support for cloning hashes
Allow cryptd hashes to be cloned.  The underlying hash will be cloned.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
0303b7f5df crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
The cryptd hash template was still using the obsolete cra_init/cra_exit
interface.  Make it use the modern ahash init_tfm/exit_tfm instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
8538e60d36 crypto: hmac - Add support for cloning
Allow hmac to be cloned.  The underlying hash can be used directly
with a reference count.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
ed3630b83e crypto: hash - Add crypto_clone_ahash/shash
This patch adds the helpers crypto_clone_ahash and crypto_clone_shash.
They are the hash-specific counterparts of crypto_clone_tfm.

This allows code paths that cannot otherwise allocate a hash tfm
object to do so.  Once a new tfm has been obtained its key could
then be changed without impacting other users.

Note that only algorithms that implement clone_tfm can be cloned.
However, all keyless hashes can be cloned by simply reusing the
tfm object.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
3c3a24cb0a crypto: api - Add crypto_clone_tfm
This patch adds the helper crypto_clone_tfm.  The purpose is to
allocate a tfm object with GFP_ATOMIC.  As we cannot sleep, the
object has to be cloned from an existing tfm object.

This allows code paths that cannot otherwise allocate a crypto_tfm
object to do so.  Once a new tfm has been obtained its key could
then be changed without impacting other users.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
ae131f4970 crypto: api - Add crypto_tfm_get
Add a crypto_tfm_get interface to allow tfm objects to be shared.
They can still be freed in the usual way.

This should only be done with tfm objects with no keys.  You must
also not modify the tfm flags in any way once it becomes shared.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-20 18:20:04 +08:00
Herbert Xu
01f727cdc4 crypto: api - Move low-level functions into algapi.h
A number of low-level functions were exposed in crypto.h.  Move
them into algapi.h (and internal.h).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-14 18:59:34 +08:00
Nick Alcock
8a8dd17d2a KEYS: remove MODULE_LICENSE in non-modules
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-04-13 13:13:51 -07:00
Herbert Xu
9697b328d1 crypto: hash - Remove maximum statesize limit
Remove the HASH_MAX_STATESIZE limit now that it is unused.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:18:53 +08:00
Herbert Xu
acc03d8908 crypto: algif_hash - Allocate hash state with kmalloc
Allocating the hash state on the stack limits its size.  Change
this to use kmalloc so the limit can be removed for new drivers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:18:53 +08:00
Herbert Xu
686cd976b6 crypto: drbg - Only fail when jent is unavailable in FIPS mode
When jent initialisation fails for any reason other than ENOENT,
the entire drbg fails to initialise, even when we're not in FIPS
mode.  This is wrong because we can still use the kernel RNG when
we're not in FIPS mode.

Change it so that it only fails when we are in FIPS mode.

Fixes: 57225e6797 ("crypto: drbg - Use callback API for random readiness")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:18:53 +08:00
Stephan Müller
3fde2fe99a crypto: jitter - permanent and intermittent health errors
According to SP800-90B, two health failures are allowed: the intermittend
and the permanent failure. So far, only the intermittent failure was
implemented. The permanent failure was achieved by resetting the entire
entropy source including its health test state and waiting for two or
more back-to-back health errors.

This approach is appropriate for RCT, but not for APT as APT has a
non-linear cutoff value. Thus, this patch implements 2 cutoff values
for both RCT/APT. This implies that the health state is left untouched
when an intermittent failure occurs. The noise source is reset
and a new APT powerup-self test is performed. Yet, whith the unchanged
health test state, the counting of failures continues until a permanent
failure is reached.

Any non-failing raw entropy value causes the health tests to reset.

The intermittent error has an unchanged significance level of 2^-30.
The permanent error has a significance level of 2^-60. Considering that
this level also indicates a false-positive rate (see SP800-90B section 4.2)
a false-positive must only be incurred with a low probability when
considering a fleet of Linux kernels as a whole. Hitting the permanent
error may cause a panic(), the following calculation applies: Assuming
that a fleet of 10^9 Linux kernels run concurrently with this patch in
FIPS mode and on each kernel 2 health tests are performed every minute
for one year, the chances of a false positive is about 1:1000
based on the binomial distribution.

In addition, any power-up health test errors triggered with
jent_entropy_init are treated as permanent errors.

A permanent failure causes the entire entropy source to permanently
return an error. This implies that a caller can only remedy the situation
by re-allocating a new instance of the Jitter RNG. In a subsequent
patch, a transparent re-allocation will be provided which also changes
the implied heuristic entropy assessment.

In addition, when the kernel is booted with fips=1, the Jitter RNG
is defined to be part of a FIPS module. The permanent error of the
Jitter RNG is translated as a FIPS module error. In this case, the entire
FIPS module must cease operation. This is implemented in the kernel by
invoking panic().

The patch also fixes an off-by-one in the RCT cutoff value which is now
set to 30 instead of 31. This is because the counting of the values
starts with 0.

Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-04-06 16:18:53 +08:00
Randy Dunlap
0dee6cd2a1 async_tx: fix kernel-doc notation warnings
Fix kernel-doc warnings by adding "struct" keyword or "enum" keyword.
Also fix 2 function parameter descriptions.
Change some functions and structs from kernel-doc /** notation
to regular /* comment notation.

async_pq.c:18: warning: cannot understand function prototype: 'struct page *pq_scribble_page; '
async_pq.c:18: error: Cannot parse struct or union!
async_pq.c:40: warning: No description found for return value of 'do_async_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'blocks' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'offsets' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'disks' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'len' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'submit' not described in 'do_sync_gen_syndrome'

async_tx.c:136: warning: cannot understand function prototype: 'enum submit_disposition '
async_tx.c:264: warning: Function parameter or member 'tx' not described in 'async_tx_quiesce'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-24 18:22:28 +08:00
Toke Høiland-Jørgensen
a543ada7db crypto: api - Demote BUG_ON() in crypto_unregister_alg() to a WARN_ON()
The crypto_unregister_alg() function expects callers to ensure that any
algorithm that is unregistered has a refcnt of exactly 1, and issues a
BUG_ON() if this is not the case. However, there are in fact drivers that
will call crypto_unregister_alg() without ensuring that the refcnt has been
lowered first, most notably on system shutdown. This causes the BUG_ON() to
trigger, which prevents a clean shutdown and hangs the system.

To avoid such hangs on shutdown, demote the BUG_ON() in
crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because
this problem was observed on a 6.2 kernel, cf the link below.

Link: https://lore.kernel.org/r/87r0tyq8ph.fsf@toke.dk
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-24 18:22:28 +08:00
Robbie Harwood
3584c1dbff asymmetric_keys: log on fatal failures in PE/pkcs7
These particular errors can be encountered while trying to kexec when
secureboot lockdown is in place.  Without this change, even with a
signed debug build, one still needs to reboot the machine to add the
appropriate dyndbg parameters (since lockdown blocks debugfs).

Accordingly, upgrade all pr_debug() before fatal error into pr_warn().

Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
2023-03-21 16:23:56 +00:00
Robbie Harwood
4fc5c74dde verify_pefile: relax wrapper length check
The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal.  Therefore, the field is not required
to be an 8-byte multiple in the first place.

Accordingly, pesign has not performed this alignment since version
0.110.  This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong".  Update the comment and relax the check.

Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only
Link: https://github.com/rhboot/pesign
Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/ # v2
2023-03-21 16:23:17 +00:00
Luis Chamberlain
68629182cd crypto: fips - simplify one-level sysctl registration for crypto_sysctl_table
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().

Simplify this registration.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-17 11:16:44 +08:00
Eric Biggers
f900fde288 crypto: testmgr - fix RNG performance in fuzz tests
The performance of the crypto fuzz tests has greatly regressed since
v5.18.  When booting a kernel on an arm64 dev board with all software
crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the
fuzz tests now take about 200 seconds to run, or about 325 seconds with
lockdep enabled, compared to about 5 seconds before.

The root cause is that the random number generation has become much
slower due to commit d4150779e6 ("random32: use real rng for
non-deterministic randomness").  On my same arm64 dev board, at the time
the fuzz tests are run, get_random_u8() is about 345x slower than
prandom_u32_state(), or about 469x if lockdep is enabled.

Lockdep makes a big difference, but much of the rest comes from the
get_random_*() functions taking a *very* slow path when the CRNG is not
yet initialized.  Since the crypto self-tests run early during boot,
even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in
my case) doesn't prevent this.  x86 systems don't have this issue, but
they still see a significant regression if lockdep is enabled.

Converting the "Fully random bytes" case in generate_random_bytes() to
use get_random_bytes() helps significantly, improving the test time to
about 27 seconds.  But that's still over 5x slower than before.

This is all a bit silly, though, since the fuzz tests don't actually
need cryptographically secure random numbers.  So let's just make them
use a non-cryptographically-secure RNG as they did before.  The original
prandom_u32() is gone now, so let's use prandom_u32_state() instead,
with an explicitly managed state, like various other self-tests in the
kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do.  This
also has the benefit that no locking is required anymore, so performance
should be even better than the original version that used prandom_u32().

Fixes: d4150779e6 ("random32: use real rng for non-deterministic randomness")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:44 +08:00
Herbert Xu
c0f9e01dd2 crypto: api - Check CRYPTO_USER instead of NET for report
The report function is currently conditionalised on CONFIG_NET.
As it's only used by CONFIG_CRYPTO_USER, conditionalising on that
instead of CONFIG_NET makes more sense.

This gets rid of a rarely used code-path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:42 +08:00
Herbert Xu
9807e49b6a crypto: rng - Count error stats differently
Move all stat code specific to rng into the rng code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:42 +08:00
Herbert Xu
1085680bbb crypto: skcipher - Count error stats differently
Move all stat code specific to skcipher into the skcipher code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:42 +08:00
Herbert Xu
e2950bf166 crypto: kpp - Count error stats differently
Move all stat code specific to kpp into the kpp code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:42 +08:00
Herbert Xu
0a742389bc crypto: acomp - Count error stats differently
Move all stat code specific to acomp into the acomp code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:42 +08:00
Herbert Xu
42808e5dc6 crypto: hash - Count error stats differently
Move all stat code specific to hash into the hash code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:41 +08:00
Herbert Xu
035d78a11c crypto: akcipher - Count error stats differently
Move all stat code specific to akcipher into the akcipher code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:41 +08:00
Herbert Xu
0df4adf868 crypto: aead - Count error stats differently
Move all stat code specific to aead into the aead code.

While we're at it, change the stats so that bytes and counts
are always incremented even in case of error.  This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.

After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:41 +08:00
Herbert Xu
ed0733eaa5 crypto: algapi - Move stat reporting into algapi
The stats code resurrected the unions from the early days of
kernel crypto.  This patch starts the process of moving them
out to the individual type structures as we do for everything
else.

In particular, add a report_stat function to cra_type and call
that from the stats code if available.  This allows us to move
the actual code over one-by-one.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-03-14 17:06:41 +08:00
Linus Torvalds
5b7c4cabbb Networking changes for 6.3.
Core
 ----
 
  - Add dedicated kmem_cache for typical/small skb->head, avoid having
    to access struct page at kfree time, and improve memory use.
 
  - Introduce sysctl to set default RPS configuration for new netdevs.
 
  - Define Netlink protocol specification format which can be used
    to describe messages used by each family and auto-generate parsers.
    Add tools for generating kernel data structures and uAPI headers.
 
  - Expose all net/core sysctls inside netns.
 
  - Remove 4s sleep in netpoll if carrier is instantly detected on boot.
 
  - Add configurable limit of MDB entries per port, and port-vlan.
 
  - Continue populating drop reasons throughout the stack.
 
  - Retire a handful of legacy Qdiscs and classifiers.
 
 Protocols
 ---------
 
  - Support IPv4 big TCP (TSO frames larger than 64kB).
 
  - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
    on socket by socket basis.
 
  - Track and report in procfs number of MPTCP sockets used.
 
  - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
    path manager.
 
  - IPv6: don't check net.ipv6.route.max_size and rely on garbage
    collection to free memory (similarly to IPv4).
 
  - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
 
  - ICMP: add per-rate limit counters.
 
  - Add support for user scanning requests in ieee802154.
 
  - Remove static WEP support.
 
  - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
    reporting.
 
  - WiFi 7 EHT channel puncturing support (client & AP).
 
 BPF
 ---
 
  - Add a rbtree data structure following the "next-gen data structure"
    precedent set by recently added linked list, that is, by using
    kfunc + kptr instead of adding a new BPF map type.
 
  - Expose XDP hints via kfuncs with initial support for RX hash and
    timestamp metadata.
 
  - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
    to better support decap on GRE tunnel devices not operating
    in collect metadata.
 
  - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
 
  - Remove the need for trace_printk_lock for bpf_trace_printk
    and bpf_trace_vprintk helpers.
 
  - Extend libbpf's bpf_tracing.h support for tracing arguments of
    kprobes/uprobes and syscall as a special case.
 
  - Significantly reduce the search time for module symbols
    by livepatch and BPF.
 
  - Enable cpumasks to be used as kptrs, which is useful for tracing
    programs tracking which tasks end up running on which CPUs in
    different time intervals.
 
  - Add support for BPF trampoline on s390x and riscv64.
 
  - Add capability to export the XDP features supported by the NIC.
 
  - Add __bpf_kfunc tag for marking kernel functions as kfuncs.
 
  - Add cgroup.memory=nobpf kernel parameter option to disable BPF
    memory accounting for container environments.
 
 Netfilter
 ---------
 
  - Remove the CLUSTERIP target. It has been marked as obsolete
    for years, and we still have WARN splats wrt. races of
    the out-of-band /proc interface installed by this target.
 
  - Add 'destroy' commands to nf_tables. They are identical to
    the existing 'delete' commands, but do not return an error if
    the referenced object (set, chain, rule...) did not exist.
 
 Driver API
 ----------
 
  - Improve cpumask_local_spread() locality to help NICs set the right
    IRQ affinity on AMD platforms.
 
  - Separate C22 and C45 MDIO bus transactions more clearly.
 
  - Introduce new DCB table to control DSCP rewrite on egress.
 
  - Support configuration of Physical Layer Collision Avoidance (PLCA)
    Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
    shared medium Ethernet.
 
  - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
    preemption of low priority frames by high priority frames.
 
  - Add support for controlling MACSec offload using netlink SET.
 
  - Rework devlink instance refcounts to allow registration and
    de-registration under the instance lock. Split the code into multiple
    files, drop some of the unnecessarily granular locks and factor out
    common parts of netlink operation handling.
 
  - Add TX frame aggregation parameters (for USB drivers).
 
  - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
    messages with notifications for debug.
 
  - Allow offloading of UDP NEW connections via act_ct.
 
  - Add support for per action HW stats in TC.
 
  - Support hardware miss to TC action (continue processing in SW from
    a specific point in the action chain).
 
  - Warn if old Wireless Extension user space interface is used with
    modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
    for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
    interface instead.
 
  - Improve the CAN bit timing configuration. Use extack to return error
    messages directly to user space, update the SJW handling, including
    the definition of a new default value that will benefit CAN-FD
    controllers, by increasing their oscillator tolerance.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - nVidia BlueField-3 support (control traffic driver)
    - Ethernet support for imx93 SoCs
    - Motorcomm yt8531 gigabit Ethernet PHY
    - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
    - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
    - Amlogic gxl MDIO mux
 
  - WiFi:
    - RealTek RTL8188EU (rtl8xxxu)
    - Qualcomm Wi-Fi 7 devices (ath12k)
 
  - CAN:
    - Renesas R-Car V4H
 
 Drivers
 -------
 
  - Bluetooth:
    - Set Per Platform Antenna Gain (PPAG) for Intel controllers.
 
  - Ethernet NICs:
    - Intel (1G, igc):
      - support TSN / Qbv / packet scheduling features of i226 model
    - Intel (100G, ice):
      - use GNSS subsystem instead of TTY
      - multi-buffer XDP support
      - extend support for GPIO pins to E823 devices
    - nVidia/Mellanox:
      - update the shared buffer configuration on PFC commands
      - implement PTP adjphase function for HW offset control
      - TC support for Geneve and GRE with VF tunnel offload
      - more efficient crypto key management method
      - multi-port eswitch support
    - Netronome/Corigine:
      - add DCB IEEE support
      - support IPsec offloading for NFP3800
    - Freescale/NXP (enetc):
      - enetc: support XDP_REDIRECT for XDP non-linear buffers
      - enetc: improve reconfig, avoid link flap and waiting for idle
      - enetc: support MAC Merge layer
    - Other NICs:
      - sfc/ef100: add basic devlink support for ef100
      - ionic: rx_push mode operation (writing descriptors via MMIO)
      - bnxt: use the auxiliary bus abstraction for RDMA
      - r8169: disable ASPM and reset bus in case of tx timeout
      - cpsw: support QSGMII mode for J721e CPSW9G
      - cpts: support pulse-per-second output
      - ngbe: add an mdio bus driver
      - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
      - r8152: handle devices with FW with NCM support
      - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
      - virtio-net: support multi buffer XDP
      - virtio/vsock: replace virtio_vsock_pkt with sk_buff
      - tsnep: XDP support
 
  - Ethernet high-speed switches:
    - nVidia/Mellanox (mlxsw):
      - add support for latency TLV (in FW control messages)
    - Microchip (sparx5):
      - separate explicit and implicit traffic forwarding rules, make
        the implicit rules always active
      - add support for egress DSCP rewrite
      - IS0 VCAP support (Ingress Classification)
      - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
      - ES2 VCAP support (Egress Access Control)
      - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - add MAB (port auth) offload support
      - enable PTP receive for mv88e6390
    - NXP (ocelot):
      - support MAC Merge layer
      - support for the the vsc7512 internal copper phys
    - Microchip:
      - lan9303: convert to PHYLINK
      - lan966x: support TC flower filter statistics
      - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
      - lan937x: support Credit Based Shaper configuration
      - ksz9477: support Energy Efficient Ethernet
    - other:
      - qca8k: convert to regmap read/write API, use bulk operations
      - rswitch: Improve TX timestamp accuracy
 
  - Intel WiFi (iwlwifi):
    - EHT (Wi-Fi 7) rate reporting
    - STEP equalizer support: transfer some STEP (connection to radio
      on platforms with integrated wifi) related parameters from the
      BIOS to the firmware.
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - IPQ5018 support
    - Fine Timing Measurement (FTM) responder role support
    - channel 177 support
 
  - MediaTek WiFi (mt76):
    - per-PHY LED support
    - mt7996: EHT (Wi-Fi 7) support
    - Wireless Ethernet Dispatch (WED) reset support
    - switch to using page pool allocator
 
  - RealTek WiFi (rtw89):
    - support new version of Bluetooth co-existance
 
  - Mobile:
    - rmnet: support TX aggregation.
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S
 IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK
 nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ
 7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el
 n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW
 9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl
 leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4
 LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP
 n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC
 xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc
 edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1
 Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI=
 =xXhC
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...
2023-02-21 18:24:12 -08:00
Linus Torvalds
36289a03bc This update includes the following changes:
API:
 
 - Use kmap_local instead of kmap_atomic.
 - Change request callback to take void pointer.
 - Print FIPS status in /proc/crypto (when enabled).
 
 Algorithms:
 
 - Add rfc4106/gcm support on arm64.
 - Add ARIA AVX2/512 support on x86.
 
 Drivers:
 
 - Add TRNG driver for StarFive SoC.
 - Delete ux500/hash driver (subsumed by stm32/hash).
 - Add zlib support in qat.
 - Add RSA support in aspeed.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmPzAiwACgkQxycdCkmx
 i6et8xAAoO3w5MZFGXMzWsYhfSZFdceXBEQfDR7JOCdHxpMIQhw0FLlb0uttFk6m
 SeWrdP9wiifBDoCmw7qffFJml8ZftPL/XeXjob2d9v7jKbPyw3lDSIdsNfN/5EEL
 oIc9915zwrgawvahPAa+PQ4Ue03qRjUyOcV42dpd1W3NYhzDVHoK5OUU+mEFYDvx
 Sgw/YUugKf0VXkVDFzG5049+CPcheyRZqclAo9jyl2eZiXujgUyV33nxRCtqIA+t
 7jlHKwi+6QzFHY0CX5BvShR8xyEuH5MLoU3H/jYGXnRb3nEpRYAEO4VZchIHqF0F
 Y6pKIKc6Q8OyIVY8RsjQY3hioCqYnQFZ5Xtc1zGtOYEitVLbkmItMG0mVn0XOfyt
 gJDi6gkEw5uPUbEQdI4R1xEgJ8eCckMsOJ+uRxqTm+uLqNDxPbsB9bohKniMogXV
 lDlVXjU23AA9VeKtqU8FvWjfgqsN47X4aoq1j4/4aI7X9F7P9FOP21TZloP7+ssj
 PFrzNaRXUrMEsvyS1wqPegIh987lj6WkH4hyU0wjzaIq4IQELidHsSXFS12iWIPH
 kTEoC/trAVoYSr0zXKWUCs4h/x0FztVNbjs4KiDP2FLXX1RzeVZ0WlaXZhryHr+n
 1+8yCuS6tVofAbSX0wNkZdf0x5+3CIBw4kqSIvjKDPYYEfIDaT0=
 =dMYe
 -----END PGP SIGNATURE-----

Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
 "API:
   - Use kmap_local instead of kmap_atomic
   - Change request callback to take void pointer
   - Print FIPS status in /proc/crypto (when enabled)

  Algorithms:
   - Add rfc4106/gcm support on arm64
   - Add ARIA AVX2/512 support on x86

  Drivers:
   - Add TRNG driver for StarFive SoC
   - Delete ux500/hash driver (subsumed by stm32/hash)
   - Add zlib support in qat
   - Add RSA support in aspeed"

* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
  crypto: x86/aria-avx - Do not use avx2 instructions
  crypto: aspeed - Fix modular aspeed-acry
  crypto: hisilicon/qm - fix coding style issues
  crypto: hisilicon/qm - update comments to match function
  crypto: hisilicon/qm - change function names
  crypto: hisilicon/qm - use min() instead of min_t()
  crypto: hisilicon/qm - remove some unused defines
  crypto: proc - Print fips status
  crypto: crypto4xx - Call dma_unmap_page when done
  crypto: octeontx2 - Fix objects shared between several modules
  crypto: nx - Fix sparse warnings
  crypto: ecc - Silence sparse warning
  tls: Pass rec instead of aead_req into tls_encrypt_done
  crypto: api - Remove completion function scaffolding
  tls: Remove completion function scaffolding
  tipc: Remove completion function scaffolding
  net: ipv6: Remove completion function scaffolding
  net: ipv4: Remove completion function scaffolding
  net: macsec: Remove completion function scaffolding
  dm: Remove completion function scaffolding
  ...
2023-02-21 18:10:50 -08:00
Herbert Xu
c43cc8823d crypto: proc - Print fips status
As FIPS may disable algorithms it is useful to show their status
in /proc/crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-14 13:39:33 +08:00
Herbert Xu
5072b1c211 crypto: ecc - Silence sparse warning
Rewrite the bitwise operations to silence the sparse warnings:

  CHECK   ../crypto/ecc.c
../crypto/ecc.c:1387:39: warning: dubious: !x | y
../crypto/ecc.c:1397:47: warning: dubious: !x | y

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-14 13:39:33 +08:00
Herbert Xu
255e48eb17 crypto: api - Use data directly in completion function
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:35:14 +08:00
Herbert Xu
f27c94aac5 crypto: cryptd - Use request_complete helpers
Use the request_complete helpers instead of calling the completion
function directly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:34:49 +08:00
Herbert Xu
564cabc0ca crypto: rsa-pkcs1pad - Use akcipher_request_complete
Use the akcipher_request_complete helper instead of calling the
completion function directly.  In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.

Fixes: 3d5b1ecdea ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:34:49 +08:00
Herbert Xu
6909823d47 crypto: engine - Use crypto_request_complete
Use the crypto_request_complete helper instead of calling the
completion function directly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:34:49 +08:00
Herbert Xu
d9588045f5 crypto: hash - Use crypto_request_complete
Use the crypto_request_complete helper instead of calling the
completion function directly.

This patch also removes the voodoo programming previously used
for unaligned ahash operations and replaces it with a sub-request.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:34:48 +08:00
Herbert Xu
256f9e53ae crypto: cryptd - Use subreq for AEAD
AEAD reuses the existing request object for its child.  This is
error-prone and unnecessary.  This patch adds a subrequest object
just like we do for skcipher and hash.

This patch also restores the original completion function as we
do for skcipher/hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-13 18:34:48 +08:00
Denis Kenzior
10de7b5429 KEYS: asymmetric: Fix ECDSA use via keyctl uapi
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated.  This makes it impossible to use such keys via
keyctl API from userspace.

Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.

Fixes: 299f561a66 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13 10:11:20 +02:00
Arnd Bergmann
0f5d4a0b99 crypto: certs: fix FIPS selftest dependency
The selftest code is built into the x509_key_parser module, and depends
on the pkcs7_message_parser module, which in turn has a dependency on
the key parser, creating a dependency loop and a resulting link
failure when the pkcs7 code is a loadable module:

ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest':
crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message'
ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data'
ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify'
ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust'
ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message'

Avoid this by only allowing the selftest to be enabled when either
both parts are loadable modules, or both are built-in.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-02-13 10:00:41 +02:00
Zhang Yiqun
acd4045db6 crypto: testmgr - add diff-splits of src/dst into default cipher config
This type of request is often happened in AF_ALG cases.
So add this vector in default cipher config array.

Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-10 17:20:19 +08:00
Herbert Xu
d52b0c780c Revert "crypto: rsa-pkcs1pad - Replace GFP_ATOMIC with GFP_KERNEL in pkcs1pad_encrypt_sign_complete"
This reverts commit 1ca2809897.

While the akcipher API as a whole is designed to be called only
from thread context, its completion path is still called from
softirq context as usual.  Therefore we must not use GFP_KERNEL
on that path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-03 12:54:54 +08:00
Herbert Xu
42a9a08b9a crypto: engine - Fix excess parameter doc warning
The engine parameter should not be marked for kernel doc as it
triggers a warning.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27 18:58:09 +08:00
Herbert Xu
51c082514c crypto: xts - Handle EBUSY correctly
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.

However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 8083b1bf81 ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27 18:58:09 +08:00
Herbert Xu
e16dda2b69 crypto: cryptd - Remove unnecessary skcipher_request_zero
Previously the child skcipher request was stored on the stack and
therefore needed to be zeroed.  As it is now dynamically allocated
we no longer need to do so.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27 18:58:09 +08:00
Vladis Dronov
1b4744e107 crypto: testmgr - disallow certain DRBG hash functions in FIPS mode
According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for
Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023
must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256,
SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS
mode.

Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27 18:58:09 +08:00
Herbert Xu
32e62025e5 crypto: seqiv - Handle EBUSY correctly
As it is seqiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of seqiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: 0a270321db ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20 18:29:31 +08:00
Herbert Xu
b5a772adf4 crypto: essiv - Handle EBUSY correctly
As it is essiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.

However, as the caller of essiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way.  Otherwise backlogged
requests will trigger a use-after-free.

Fixes: be1eb7f78a ("crypto: essiv - create wrapper template...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20 18:29:31 +08:00
Ard Biesheuvel
425359aef4 crypto: tcrypt - include larger key sizes in RFC4106 benchmark
RFC4106 wraps AES in GCM mode, and can be used with larger key sizes
than 128/160 bits, just like AES itself. So add these to the tcrypt
recipe so they will be benchmarked as well.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-20 18:29:31 +08:00
Lukas Wunner
3609ff6401 wifi: cfg80211: Deduplicate certificate loading
load_keys_from_buffer() in net/wireless/reg.c duplicates
x509_load_certificate_list() in crypto/asymmetric_keys/x509_loader.c
for no apparent reason.

Deduplicate it.  No functional change intended.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/e7280be84acda02634bc7cb52c97656182b9c700.1673197326.git.lukas@wunner.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-19 14:46:45 +01:00
Ard Biesheuvel
d07bd950b9 crypto: skcipher - Use scatterwalk (un)map interface for dst and src buffers
The skcipher walk API implementation avoids scatterwalk_map() for
mapping the source and destination buffers, and invokes kmap_atomic()
directly if the buffer in question is not in low memory (which can only
happen on 32-bit architectures). This avoids some overhead on 64-bit
architectures, and most notably, permits the skcipher code to run with
preemption enabled.

Now that scatterwalk_map() has been updated to use kmap_local(), none of
this is needed, so we can simply use scatterwalk_map/unmap instead.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-13 12:11:18 +08:00
Taehee Yoo
35344cf30f crypto: x86/aria - do not use magic number offsets of aria_ctx
aria-avx assembly code accesses members of aria_ctx with magic number
offset. If the shape of struct aria_ctx is changed carelessly,
aria-avx will not work.
So, we need to ensure accessing members of aria_ctx with correct
offset values, not with magic numbers.

It adds ARIA_CTX_enc_key, ARIA_CTX_dec_key, and ARIA_CTX_rounds in the
asm-offsets.c So, correct offset definitions will be generated.
aria-avx assembly code can access members of aria_ctx safely with
these definitions.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Nicolai Stange
c27b2d2012 crypto: testmgr - allow ecdsa-nist-p256 and -p384 in FIPS mode
The kernel provides implementations of the NIST ECDSA signature
verification primitives. For key sizes of 256 and 384 bits respectively
they are approved and can be enabled in FIPS mode. Do so.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Nicolai Stange
2912eb9b17 crypto: testmgr - disallow plain ghash in FIPS mode
ghash may be used only as part of the gcm(aes) construction in FIPS
mode. Since commit d6097b8d5d ("crypto: api - allow algs only in specific
constructions in FIPS mode") there's support for using spawns which by
itself are marked as non-approved from approved template instantiations.
So simply mark plain ghash as non-approved in testmgr to block any attempts
of direct instantiations in FIPS mode.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Nicolai Stange
1ce94a8c2c crypto: testmgr - disallow plain cbcmac(aes) in FIPS mode
cbcmac(aes) may be used only as part of the ccm(aes) construction in FIPS
mode. Since commit d6097b8d5d ("crypto: api - allow algs only in specific
constructions in FIPS mode") there's support for using spawns which by
itself are marked as non-approved from approved template instantiations.
So simply mark plain cbcmac(aes) as non-approved in testmgr to block any
attempts of direct instantiations in FIPS mode.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Arnd Bergmann
8031d1f678 crypto: wp512 - disable kmsan checks in wp512_process_buffer()
The memory sanitizer causes excessive register spills in this function:

crypto/wp512.c:782:13: error: stack frame size (2104) exceeds limit (2048) in 'wp512_process_buffer' [-Werror,-Wframe-larger-than]

Assume that this one is safe, and mark it as needing no checks to
get the stack usage back down to the normal level.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30 22:56:27 +08:00
Ard Biesheuvel
aa9695157f crypto: scatterwalk - use kmap_local() not kmap_atomic()
kmap_atomic() is used to create short-lived mappings of pages that may
not be accessible via the kernel direct map. This is only needed on
32-bit architectures that implement CONFIG_HIGHMEM, but it can be used
on 64-bit other architectures too, where the returned mapping is simply
the kernel direct address of the page.

However, kmap_atomic() does not support migration on CONFIG_HIGHMEM
configurations, due to the use of per-CPU kmap slots, and so it disables
preemption on all architectures, not just the 32-bit ones. This implies
that all scatterwalk based crypto routines essentially execute with
preemption disabled all the time, which is less than ideal.

So let's switch scatterwalk_map/_unmap and the shash/ahash routines to
kmap_local() instead, which serves a similar purpose, but without the
resulting impact on preemption on architectures that have no need for
CONFIG_HIGHMEM.

Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Elliott, Robert (Servers)" <elliott@hpe.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30 22:56:27 +08:00
Linus Torvalds
64e7003c6b This update includes the following changes:
API:
 
 - Optimise away self-test overhead when they are disabled.
 - Support symmetric encryption via keyring keys in af_alg.
 - Flip hwrng default_quality, the default is now maximum entropy.
 
 Algorithms:
 
 - Add library version of aesgcm.
 - CFI fixes for assembly code.
 - Add arm/arm64 accelerated versions of sm3/sm4.
 
 Drivers:
 
 - Remove assumption on arm64 that kmalloc is DMA-aligned.
 - Fix selftest failures in rockchip.
 - Add support for RK3328/RK3399 in rockchip.
 - Add deflate support in qat.
 - Merge ux500 into stm32.
 - Add support for TEE for PCI ID 0x14CA in ccp.
 - Add mt7986 support in mtk.
 - Add MaxLinear platform support in inside-secure.
 - Add NPCM8XX support in npcm.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmOZhNQACgkQxycdCkmx
 i6edOQ/+IHYe2Z+fLsMGs0qgTVaEV33O0crTRl/PMkfBJai57grz6x/G9QrkwGHS
 084u4RmwhVrE7Z/pxvey48m0lHMw3H/ElLTRl5LV1zE2OtGgr4VV63wtqthu1QS1
 KblVnjb52DhFhvF1O1IrK9lxyX0lByOiARFVdyZR6+Rb66Xfq8rqk5t8U8mmTUFz
 ds9S2Un4HajgtjNEyI78DOX8o4wVST8tltQs0eVii6T9AeXgSgX37ytD7Xtg/zrz
 /p61KFgKBQkRT7EEGD6xgNrND0vNAp2w98ZTTRXTZI8+Y0aTUcTYya7cXOLBt9bQ
 rA7z9sNKvmwJijTMV6O9eqRGcYfzc2G4qfMhlQqj/P2pjLnEZXdvFNHTTbclR76h
 2UFlZXPDQVQukvnNNnB6bmIvv6DsM+jmGH0pK5BnBJXnD5SOZh1RqjJxw0Kj6QCM
 VxpKDvfStux2Guh6mz1lJna/S44qKy/sVYkWUawcmE4RF2+GfNayM1GUpEUofndE
 vz1yZdgLPETSh5QzKrjFkUAnqo/AsAdc5Qxroz9DRz1BCC0GCuIxjUG8ScTWgcth
 R/reQDczBckCNpPxrWPHHYoVXnAMwEFySfcjZyuCoMO6t6qVUvcjRShCyKwO/JPl
 9YREdRmq0swwIB9cFIrEoWrzc3wjjBtsltDFlkKsa9c92LXoW+g=
 =OpWt
 -----END PGP SIGNATURE-----

Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Optimise away self-test overhead when they are disabled
   - Support symmetric encryption via keyring keys in af_alg
   - Flip hwrng default_quality, the default is now maximum entropy

  Algorithms:
   - Add library version of aesgcm
   - CFI fixes for assembly code
   - Add arm/arm64 accelerated versions of sm3/sm4

  Drivers:
   - Remove assumption on arm64 that kmalloc is DMA-aligned
   - Fix selftest failures in rockchip
   - Add support for RK3328/RK3399 in rockchip
   - Add deflate support in qat
   - Merge ux500 into stm32
   - Add support for TEE for PCI ID 0x14CA in ccp
   - Add mt7986 support in mtk
   - Add MaxLinear platform support in inside-secure
   - Add NPCM8XX support in npcm"

* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
  crypto: ux500/cryp - delete driver
  crypto: stm32/cryp - enable for use with Ux500
  crypto: stm32 - enable drivers to be used on Ux500
  dt-bindings: crypto: Let STM32 define Ux500 CRYP
  hwrng: geode - Fix PCI device refcount leak
  hwrng: amd - Fix PCI device refcount leak
  crypto: qce - Set DMA alignment explicitly
  crypto: octeontx2 - Set DMA alignment explicitly
  crypto: octeontx - Set DMA alignment explicitly
  crypto: keembay - Set DMA alignment explicitly
  crypto: safexcel - Set DMA alignment explicitly
  crypto: hisilicon/hpre - Set DMA alignment explicitly
  crypto: chelsio - Set DMA alignment explicitly
  crypto: ccree - Set DMA alignment explicitly
  crypto: ccp - Set DMA alignment explicitly
  crypto: cavium - Set DMA alignment explicitly
  crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
  crypto: arm64/ghash-ce - use frame_push/pop macros consistently
  crypto: arm64/crct10dif - use frame_push/pop macros consistently
  crypto: arm64/aes-modes - use frame_push/pop macros consistently
  ...
2022-12-14 12:31:09 -08:00
Linus Torvalds
75f4d9af8b iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
 more of the same for the future.
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
 65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
 MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
 =bcvF
 -----END PGP SIGNATURE-----

Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls
2022-12-12 18:29:54 -08:00
Herbert Xu
1c79957197 crypto: api - Increase MAX_ALGAPI_ALIGNMASK to 127
Previously we limited the maximum alignment mask to 63.  This
is mostly due to stack usage for shash.  This patch introduces
a separate limit for shash algorithms and increases the general
limit to 127 which is the value that we need for DMA allocations
on arm64.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02 18:12:40 +08:00
Herbert Xu
14386d4713 crypto: Prepare to move crypto_tfm_ctx
The helper crypto_tfm_ctx is only used by the Crypto API algorithm
code and should really be in algapi.h.  However, for historical
reasons many files relied on it to be in crypto.h.  This patch
changes those files to use algapi.h instead in prepartion for a
move.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02 18:12:40 +08:00
Herbert Xu
cb99fc0dd1 crypto: dh - Use helper to set reqsize
The value of reqsize must only be changed through the helper.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02 18:12:40 +08:00
Herbert Xu
5b11d1a360 crypto: rsa-pkcs1pad - Use helper to set reqsize
The value of reqsize must only be changed through the helper.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-02 18:12:39 +08:00
Al Viro
de4eda9de2 use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25 13:01:55 -05:00
Eric Biggers
c060e16ddb Revert "crypto: shash - avoid comparing pointers to exported functions under CFI"
This reverts commit 22ca9f4aaf because CFI
no longer breaks cross-module function address equality, so
crypto_shash_alg_has_setkey() can now be an inline function like before.

This commit should not be backported to kernels that don't have the new
CFI implementation.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:19 +08:00
Zhang Yiqun
1aa33fc8d4 crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.

Fixes: e161c5930c ("crypto: tcrypt - add multibuf skcipher...")
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
441cb1b730 crypto: algboss - compile out test-related code when tests disabled
When CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is set, the code in algboss.c
that handles CRYPTO_MSG_ALG_REGISTER is unnecessary, so make it be
compiled out.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
790c4c9f53 crypto: kdf - silence noisy self-test
Make the kdf_sp800108 self-test only print a message on success when
fips_enabled, so that it's consistent with testmgr.c and doesn't spam
the kernel log with a message that isn't really important.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
0bf365c0ef crypto: kdf - skip self-test when tests disabled
Make kdf_sp800108 honor the CONFIG_CRYPTO_MANAGER_DISABLE_TESTS kconfig
option, so that it doesn't always waste time running its self-test.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
06bd9c967e crypto: api - compile out crypto_boot_test_finished when tests disabled
The crypto_boot_test_finished static key is unnecessary when self-tests
are disabled in the kconfig, so optimize it out accordingly, along with
the entirety of crypto_start_tests().  This mainly avoids the overhead
of an unnecessary static_branch_enable() on every boot.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
9cadd73ade crypto: algboss - optimize registration of internal algorithms
Since algboss always skips testing of algorithms with the
CRYPTO_ALG_INTERNAL flag, there is no need to go through the dance of
creating the test kthread, which creates a lot of overhead.  Instead, we
can just directly finish the algorithm registration, like is now done
when self-tests are disabled entirely.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Eric Biggers
a7008584ab crypto: api - optimize algorithm registration when self-tests disabled
Currently, registering an algorithm with the crypto API always causes a
notification to be posted to the "cryptomgr", which then creates a
kthread to self-test the algorithm.  However, if self-tests are disabled
in the kconfig (as is the default option), then this kthread just
notifies waiters that the algorithm has been tested, then exits.

This causes a significant amount of overhead, especially in the kthread
creation and destruction, which is not necessary at all.  For example,
in a quick test I found that booting a "minimum" x86_64 kernel with all
the crypto options enabled (except for the self-tests) takes about 400ms
until PID 1 can start.  Of that, a full 13ms is spent just doing this
pointless dance, involving a kthread being created, run, and destroyed
over 200 times.  That's over 3% of the entire kernel start time.

Fix this by just skipping the creation of the test larval and the
posting of the registration notification entirely, when self-tests are
disabled.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-25 17:39:18 +08:00
Herbert Xu
e6cb02bd0a crypto: skcipher - Allow sync algorithms with large request contexts
Some sync algorithms may require a large amount of temporary
space during its operations.  There is no reason why they should
be limited just because some legacy users want to place all
temporary data on the stack.

Such algorithms can now set a flag to indicate that they need
extra request context, which will cause them to be invisible
to users that go through the sync_skcipher interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18 16:59:34 +08:00
Herbert Xu
3a58c23117 crypto: cryptd - Use request context instead of stack for sub-request
cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface.  In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.

Fixes: 36b3875a97 ("crypto: cryptd - Remove VLA usage of skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18 16:59:34 +08:00
Jason A. Donenfeld
e8a533cbeb treewide: use get_random_u32_inclusive() when possible
These cases were done with this Coccinelle:

@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)

@@
expression H;
expression L;
expression E;
@@
  get_random_u32_inclusive(L,
  H
- + E
- - E
  )

@@
expression H;
expression L;
expression E;
@@
  get_random_u32_inclusive(L,
  H
- - E
- + E
  )

@@
expression H;
expression L;
expression E;
expression F;
@@
  get_random_u32_inclusive(L,
  H
- - E
  + F
- + E
  )

@@
expression H;
expression L;
expression E;
expression F;
@@
  get_random_u32_inclusive(L,
  H
- + E
  + F
- - E
  )

And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:18:02 +01:00
Jason A. Donenfeld
8032bf1233 treewide: use get_random_u32_below() instead of deprecated function
This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
  (E)

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:15:15 +01:00
Ard Biesheuvel
61c581a46a crypto: move gf128mul library into lib/crypto
The gf128mul library does not depend on the crypto API at all, so it can
be moved into lib/crypto. This will allow us to use it in other library
code in a subsequent patch without having to depend on CONFIG_CRYPTO.

While at it, change the Kconfig symbol name to align with other crypto
library implementations. However, the source file name is retained, as
it is reflected in the module .ko filename, and changing this might
break things for users.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-11 18:14:59 +08:00
Tianjia Zhang
3c3836378d crypto: tcrypt - add SM4 cts-cbc/xts/xcbc test
Added CTS-CBC/XTS/XCBC tests for SM4 algorithms, as well as
corresponding speed tests, this is to test performance-optimized
implementations of these modes.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:34:21 +08:00
Tianjia Zhang
c24ee936c7 crypto: testmgr - add SM4 cts-cbc/xts/xcbc test vectors
This patch newly adds the test vectors of CTS-CBC/XTS/XCBC modes of
the SM4 algorithm, and also added some test vectors for SM4 GCM/CCM.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:34:21 +08:00
Anirudh Venkataramanan
3513828cb8 crypto: tcrypt - Drop leading newlines from prints
The top level print banners have a leading newline. It's not entirely
clear why this exists, but it makes it harder to parse tcrypt test output
using a script. Drop said newlines.

tcrypt output before this patch:

[...]
      testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption
[...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes)

tcrypt output with this patch:

[...] testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption
[...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes)

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:33:22 +08:00
Anirudh Venkataramanan
a2ef563000 crypto: tcrypt - Drop module name from print string
The pr_fmt() define includes KBUILD_MODNAME, and so there's no need
for pr_err() to also print it. Drop module name from the print string.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:33:22 +08:00
Anirudh Venkataramanan
837a99f590 crypto: tcrypt - Use pr_info/pr_err
Currently, there's mixed use of printk() and pr_info()/pr_err(). The latter
prints the module name (because pr_fmt() is defined so) but the former does
not. As a result there's inconsistency in the printed output. For example:

modprobe mode=211:

[...] test 0 (160 bit key, 16 byte blocks): 1 operation in 2320 cycles (16 bytes)
[...] test 1 (160 bit key, 64 byte blocks): 1 operation in 2336 cycles (64 bytes)

modprobe mode=215:

[...] tcrypt: test 0 (160 bit key, 16 byte blocks): 1 operation in 2173 cycles (16 bytes)
[...] tcrypt: test 1 (160 bit key, 64 byte blocks): 1 operation in 2241 cycles (64 bytes)

Replace all instances of printk() with pr_info()/pr_err() so that the
module name is printed consistently.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:33:22 +08:00
Anirudh Venkataramanan
fdaeb224e2 crypto: tcrypt - Use pr_cont to print test results
For some test cases, a line break gets inserted between the test banner
and the results. For example, with mode=211 this is the output:

[...]
      testing speed of rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption
[...] test 0 (160 bit key, 16 byte blocks):
[...] 1 operation in 2373 cycles (16 bytes)

--snip--

[...]
      testing speed of gcm(aes) (generic-gcm-aesni) encryption
[...] test 0 (128 bit key, 16 byte blocks):
[...] 1 operation in 2338 cycles (16 bytes)

Similar behavior is seen in the following cases as well:

  modprobe tcrypt mode=212
  modprobe tcrypt mode=213
  modprobe tcrypt mode=221
  modprobe tcrypt mode=300 sec=1
  modprobe tcrypt mode=400 sec=1

This doesn't happen with mode=215:

[...] tcrypt:
              testing speed of multibuffer rfc4106(gcm(aes)) (rfc4106-gcm-aesni) encryption
[...] tcrypt: test 0 (160 bit key, 16 byte blocks): 1 operation in 2215 cycles (16 bytes)

--snip--

[...] tcrypt:
              testing speed of multibuffer gcm(aes) (generic-gcm-aesni) encryption
[...] tcrypt: test 0 (128 bit key, 16 byte blocks): 1 operation in 2191 cycles (16 bytes)

This print inconsistency is because printk() is used instead of pr_cont()
in a few places. Change these to be pr_cont().

checkpatch warns that pr_cont() shouldn't be used. This can be ignored in
this context as tcrypt already uses pr_cont().

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:33:22 +08:00
Frederick Lawler
7984ceb134 crypto: af_alg - Support symmetric encryption via keyring keys
We want to leverage keyring to store sensitive keys, and then use those
keys for symmetric encryption via the crypto API. Among the key types we
wish to support are: user, logon, encrypted, and trusted.

User key types are already able to have their data copied to user space,
but logon does not support this. Further, trusted and encrypted keys will
return their encrypted data back to user space on read, which does not
make them ideal for symmetric encryption.

To support symmetric encryption for these key types, add a new
ALG_SET_KEY_BY_KEY_SERIAL setsockopt() option to the crypto API. This
allows users to pass a key_serial_t to the crypto API to perform
symmetric encryption. The behavior is the same as ALG_SET_KEY, but
the crypto key data is copied in kernel space from a keyring key,
which allows for the support of logon, encrypted, and trusted key types.

Keyring keys must have the KEY_(POS|USR|GRP|OTH)_SEARCH permission set
to leverage this feature. This follows the asymmetric_key type where key
lookup calls eventually lead to keyring_search_rcu() without the
KEYRING_SEARCH_NO_CHECK_PERM flag set.

Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-28 12:36:34 +08:00
Robert Elliott
65c92cbb3f crypto: tcrypt - fix return value for multiple subtests
When a test mode invokes multiple tests (e.g., mode 0 invokes modes
1 through 199, and mode 3 tests three block cipher modes with des),
don't keep accumulating the return values with ret += tcrypt_test(),
which results in a bogus value if more than one report a nonzero
value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)).
Instead, keep track of the minimum return value reported by any
subtest.

Fixes: 4e033a6bc7 ("crypto: tcrypt - Do not exit on success in fips mode")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21 19:15:35 +08:00
Tianjia Zhang
ad981647db crypto: ccm - use local variables instead of indirect references
The variable odata has been introduced into the function scope as
a variable and should be used directly.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-10-21 19:05:23 +08:00
Jason A. Donenfeld
197173db99 treewide: use get_random_bytes() when possible
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:58 -06:00
Jason A. Donenfeld
7e3cf0843f treewide: use get_random_{u8,u16}() when possible, part 1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done
mechanically with this coccinelle script:

@@
expression E;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
typedef __be16;
typedef __le16;
typedef u8;
@@
(
- (get_random_u32() & 0xffff)
+ get_random_u16()
|
- (get_random_u32() & 0xff)
+ get_random_u8()
|
- (get_random_u32() % 65536)
+ get_random_u16()
|
- (get_random_u32() % 256)
+ get_random_u8()
|
- (get_random_u32() >> 16)
+ get_random_u16()
|
- (get_random_u32() >> 24)
+ get_random_u8()
|
- (u16)get_random_u32()
+ get_random_u16()
|
- (u8)get_random_u32()
+ get_random_u8()
|
- (__be16)get_random_u32()
+ (__be16)get_random_u16()
|
- (__le16)get_random_u32()
+ (__le16)get_random_u16()
|
- prandom_u32_max(65536)
+ get_random_u16()
|
- prandom_u32_max(256)
+ get_random_u8()
|
- E->inet_id = get_random_u32()
+ E->inet_id = get_random_u16()
)

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
identifier v;
@@
- u16 v = get_random_u32();
+ u16 v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
identifier v;
@@
- u8 v = get_random_u32();
+ u8 v = get_random_u8();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
u16 v;
@@
-  v = get_random_u32();
+  v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
u8 v;
@@
-  v = get_random_u32();
+  v = get_random_u8();

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Examine limits
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value < 256:
        coccinelle.RESULT = cocci.make_ident("get_random_u8")
elif value < 65536:
        coccinelle.RESULT = cocci.make_ident("get_random_u16")
else:
        print("Skipping large mask of %s" % (literal))
        cocci.include_match(False)

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
identifier add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       (RESULT() & LITERAL)

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:58 -06:00
Jason A. Donenfeld
81895a65ec treewide: use prandom_u32_max() when possible, part 1
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:

@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)

@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@

-       RAND = get_random_u32();
        ... when != RAND
-       RAND %= (E);
+       RAND = prandom_u32_max(E);

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
        print("Skipping 0x%x for cleanup elsewhere" % (value))
        cocci.include_match(False)
elif value & (value + 1) != 0:
        print("Skipping 0x%x because it's not a power of two minus one" % (value))
        cocci.include_match(False)
elif literal.startswith('0x'):
        coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
        coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       prandom_u32_max(RESULT)

@collapse_ret@
type T;
identifier VAR;
expression E;
@@

 {
-       T VAR;
-       VAR = (E);
-       return VAR;
+       return E;
 }

@drop_var@
type T;
identifier VAR;
@@

 {
-       T VAR;
        ... when != VAR
 }

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:55 -06:00
Linus Torvalds
27bc50fc90 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative
   reports (or any positive ones, come to that).
 
 - Also the Maple Tree from Liam R.  Howlett.  An overlapping range-based
   tree for vmas.  It it apparently slight more efficient in its own right,
   but is mainly targeted at enabling work to reduce mmap_lock contention.
 
   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.
 
   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
   This has yet to be addressed due to Liam's unfortunately timed
   vacation.  He is now back and we'll get this fixed up.
 
 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer.  It uses
   clang-generated instrumentation to detect used-unintialized bugs down to
   the single bit level.
 
   KMSAN keeps finding bugs.  New ones, as well as the legacy ones.
 
 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.
 
 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
   file/shmem-backed pages.
 
 - userfaultfd updates from Axel Rasmussen
 
 - zsmalloc cleanups from Alexey Romanov
 
 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
 
 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.
 
 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.
 
 - memcg cleanups from Kairui Song.
 
 - memcg fixes and cleanups from Johannes Weiner.
 
 - Vishal Moola provides more folio conversions
 
 - Zhang Yi removed ll_rw_block() :(
 
 - migration enhancements from Peter Xu
 
 - migration error-path bugfixes from Huang Ying
 
 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths.  For optimizations by PMEM drivers, DRM
   drivers, etc.
 
 - vma merging improvements from Jakub Matěn.
 
 - NUMA hinting cleanups from David Hildenbrand.
 
 - xu xin added aditional userspace visibility into KSM merging activity.
 
 - THP & KSM code consolidation from Qi Zheng.
 
 - more folio work from Matthew Wilcox.
 
 - KASAN updates from Andrey Konovalov.
 
 - DAMON cleanups from Kaixu Xia.
 
 - DAMON work from SeongJae Park: fixes, cleanups.
 
 - hugetlb sysfs cleanups from Muchun Song.
 
 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
 joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
 bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
 =xfWx
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...
2022-10-10 17:53:04 -07:00
Alexander Potapenko
440fed95eb crypto: kmsan: disable accelerated configs under KMSAN
KMSAN is unable to understand when initialized values come from assembly. 
Disable accelerated configs in KMSAN builds to prevent false positive
reports.

Link: https://lkml.kernel.org/r/20220915150417.722975-27-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-03 14:03:22 -07:00
Taehee Yoo
c4b1ce72b5 crypto: tcrypt - add async speed test for aria cipher
In order to test for the performance of aria-avx implementation, it needs
an async speed test.
So, it adds async speed tests to the tcrypt.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24 16:14:44 +08:00
Taehee Yoo
a9b0838dd8 crypto: aria - prepare generic module for optimized implementations
It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24 16:14:44 +08:00
Xiu Jianfeng
33837be333 crypto: add __init/__exit annotations to init/exit funcs
Add missing __init/__exit annotations to init/exit funcs.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24 16:14:43 +08:00
Lukas Bulwahn
1b79573de7 crypto: blake2s - revert unintended config addition of CRYPTO_BLAKE2S
Commit 2d16803c56 ("crypto: blake2s - remove shash module") removes the
config CRYPTO_BLAKE2S.

Commit 3f342a2325 ("crypto: Kconfig - simplify hash entries") makes
various changes to the config descriptions as part of some consolidation
and clean-up, but among all those changes, it also accidently adds back
CRYPTO_BLAKE2S after its removal due to the original patch being based on
a state before the CRYPTO_BLAKE2S removal.

See Link for the author's confirmation of this happening accidently.

Fixes: 3f342a2325 ("crypto: Kconfig - simplify hash entries")
Link: https://lore.kernel.org/all/MW5PR84MB18424AB8C095BFC041AE33FDAB479@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-24 16:14:43 +08:00
Ignat Korchagin
bc155c6c18 crypto: akcipher - default implementation for setting a private key
Changes from v1:
  * removed the default implementation from set_pub_key: it is assumed that
    an implementation must always have this callback defined as there are
    no use case for an algorithm, which doesn't need a public key

Many akcipher implementations (like ECDSA) support only signature
verifications, so they don't have all callbacks defined.

Commit 78a0324f4a ("crypto: akcipher - default implementations for
request callbacks") introduced default callbacks for sign/verify
operations, which just return an error code.

However, these are not enough, because before calling sign the caller would
likely call set_priv_key first on the instantiated transform (as the
in-kernel testmgr does). This function does not have a default stub, so the
kernel crashes, when trying to set a private key on an akcipher, which
doesn't support signature generation.

I've noticed this, when trying to add a KAT vector for ECDSA signature to
the testmgr.

With this patch the testmgr returns an error in dmesg (as it should)
instead of crashing the kernel NULL ptr dereference.

Fixes: 78a0324f4a ("crypto: akcipher - default implementations for request callbacks")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-09 16:18:33 +08:00
Lucas Segarra Fernandez
442f06067f crypto: testmgr - fix indentation for test_acomp() args
Set right indentation for test_acomp().

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-02 18:38:06 +08:00
Robert Elliott
a9a98d49da crypto: Kconfig - simplify compression/RNG entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:43 +08:00
Robert Elliott
cf514b2a59 crypto: Kconfig - simplify cipher entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:43 +08:00
Robert Elliott
9bc517155f crypto: Kconfig - simplify userspace entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:43 +08:00
Robert Elliott
3f342a2325 crypto: Kconfig - simplify hash entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:43 +08:00
Robert Elliott
e3d2eadd06 crypto: Kconfig - simplify aead entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:42 +08:00
Robert Elliott
ec84348da4 crypto: Kconfig - simplify CRC entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:42 +08:00
Robert Elliott
05b3746527 crypto: Kconfig - simplify public-key entries
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
  "hardware acceleration", or "optimized"

Simplify help text descriptions, update references, and ensure that
https references are still valid.

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:42 +08:00
Robert Elliott
f1f142ad43 crypto: Kconfig - add submenus
Convert each comment section into a submenu:
  Cryptographic API
    Crypto core or helper
    Public-key cryptography
    Block ciphers
    Length-preserving ciphers and modes
    AEAD (authenticated encryption with associated data) ciphers
    Hashes, digests, and MACs
    CRCs (cyclic redundancy checks)
    Compression
    Random number generation
    Userspace interface

That helps find entries (e.g., searching for a name like SHA512 doesn't
just report the location is Main menu -> Cryptography API, leaving you
to wade through 153 entries; it points you to the Digests page).

Move entries so they fall into the correct submenus and are
better sorted.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:42 +08:00
Robert Elliott
4a329fecc9 crypto: Kconfig - submenus for arm and arm64
Move ARM- and ARM64-accelerated menus into a submenu under
the Crypto API menu (paralleling all the architectures).

Make each submenu always appear if the corresponding architecture
is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols.

The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from:
    General setup  --->
    Platform selection  --->
    Kernel Features  --->
    Boot options  --->
    Power management options  --->
    CPU Power Management  --->
[*] ACPI (Advanced Configuration and Power Interface) Support  --->
[*] Virtualization  --->
[*] ARM Accelerated Cryptographic Algorithms  --->
     (or)
[*] ARM64 Accelerated Cryptographic Algorithms  --->
    ...
-*- Cryptographic API  --->
    Library routines  --->
    Kernel hacking  --->

and moves into the Cryptographic API menu, which now contains:
      ...
      Accelerated Cryptographic Algorithms for CPU (arm) --->
      (or)
      Accelerated Cryptographic Algorithms for CPU (arm64) --->
[*]   Hardware crypto devices  --->
      ...

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:41 +08:00
Robert Elliott
28a936ef44 crypto: Kconfig - move x86 entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:41 +08:00
Robert Elliott
0e9f9ea6e2 crypto: Kconfig - move sparc entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:41 +08:00
Robert Elliott
c9d24c97c8 crypto: Kconfig - move s390 entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:41 +08:00
Robert Elliott
6a490a4e8b crypto: Kconfig - move powerpc entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:41 +08:00
Robert Elliott
e45f710b42 crypto: Kconfig - move mips entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.

Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:40 +08:00
Wolfram Sang
dd4f8ee7ed crypto: core - move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:50:38 +08:00
Robert Elliott
6363d81b78 crypto: tcrypt - remove mode=1000
The lists of algothms checked for existence by
    modprobe tcrypt mode=1000
generates three bogus errors:
    modprobe tcrypt mode=1000

    console log:
    tcrypt: alg rot13 not found
    tcrypt: alg cts not found
    tcrypt: alg arc4 not found

rot13 is not an algorithm in the crypto API or tested.

cts is a wrapper, not a base algorithm.

arc4 is named ecb(arc4), not arc4.

Also, the list is missing numerous algorithms that are tested by
other test modes:
    blake2b-512
    blake2s-256
    crct10dif
    xxhash64
    ghash
    cast5
    sm4
    ansi_prng

Several of the algorithms are only available if
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is enabled:
    arc4
    khazad
    seed
    tea, xtea, xeta

Rather that fix that list, remove test mode=1000 entirely.
It seems to have limited utility, and a web search shows no
discussion of anybody using it.

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26 18:49:09 +08:00
Robert Elliott
a76bd86a85 crypto: testmgr - don't generate WARN for missing modules
This userspace command:
    modprobe tcrypt
or
    modprobe tcrypt mode=0

runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).

Tests are sparsely numbered from 0 to 1000. For example:
    modprobe tcrypt mode=12
tests sha512, and
    modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC

The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):

    alg: skcipher: failed to allocate transform for ecb(arc4): -2
    ------------[ cut here ]-----------
    alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
    WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
    [50 more lines....]

    ---[ end trace 0000000000000000 ]---

If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
    arc4 tea xtea khazad anubis xeta seed

Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.

One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.

Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.

This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).

Result - no more WARNINGs:
modprobe tcrypt
[  115.541765] tcrypt: testing md5
[  115.556415] tcrypt: testing sha1
[  115.570463] tcrypt: testing ecb(des)
[  115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[  115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[  115.593038] tcrypt: testing cbc(des)
[  115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[  115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:39 +08:00
Lucas Segarra Fernandez
5a4c293666 crypto: testmgr - extend acomp tests for NULL destination buffer
Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.

Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.

Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:37 +08:00
Jason Wang
bc9d6dac09 crypto: api - Fix comment typo
The double `to' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:37 +08:00
Dong Chuanjian
66c8137f75 crypto: drbg - remove unnecessary (void*) conversions
remove unnecessary void* type casting

v2:
Turn assignments less than 75 characters into one line.

Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:36 +08:00