Here is the big set of tty/serial driver changes for 6.10-rc1. Included
in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos instead
of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4Cvg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqpwCgnHU1NeBBUsvoSDOLk5oApIQ4jVgAn102jWlw
3dNDhA4i3Ay/mZdv8/Kj
=TI+P
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
-----BEGIN PGP SIGNATURE-----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=y45P
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
CONFIG_BASE_SMALL is currently a type int but is only used as a boolean.
So, change its type to bool and adapt all usages:
CONFIG_BASE_SMALL == 0 becomes !IS_ENABLED(CONFIG_BASE_SMALL) and
CONFIG_BASE_SMALL != 0 becomes IS_ENABLED(CONFIG_BASE_SMALL).
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://lore.kernel.org/r/20240505080343.1471198-3-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Starke <daniel.starke@siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change strips $abs_srctree of the input file containing the
character mapping table in the generated output. The motivation for this
change is Yocto emitting a build warning
WARNING: linux-lxatac-6.7-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-lxatac/6.7-r0/drivers/tty/vt/consolemap_deftbl.c in package linux-lxatac-src contains reference to TMPDIR
So this change brings us one step closer to make the build result
reproducible independent of the build path.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240311113017.483101-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwqow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNegCffxTbsnbMGjWhVrQ326IJx/DFvNMAoI9csigv
m+G3RzefzZLRx8nAma0c
=GMfc
-----END PGP SIGNATURE-----
Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Fixes: 81732c3b2f ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corrected the doc of vc_sanitize_unicode() and vc_translate_unicode(),
tightly coupled functions which parse UTF-8 byte sequences.
1. Desc. of @rescan corresponded to the meaning of the return value -1.
Corrected + added "Return:" section.
2. Replaced the ambiguous "character" with "code point" or "byte".
Signed-off-by: Roman Žilka <roman.zilka@gmail.com>
Link: https://lore.kernel.org/r/bee9faa8-0ea7-4411-bf77-3cb2e06385c7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
0x0d00ff81 and 0x0800f501 are bitmasks of ASCII characters. Spell them
explicitly using BIT() + ASCII constants. GENMASK() is used for the
9-bit range in CTRL_ACTION.
This also modifies the 'if' checking if the masks should be applied.
>From a "random" ' ' to the actual size of the bitmasks' type.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are still numbers used for ASCII characters in vt_console_print().
As we have an ASCII enum now, use the constant names from the enum
instead.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To be uniform in the 'c' handling, use switch-case (with ranges) even in
the ESgetpars case in do_con_trol().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-21-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To be uniform in the 'c' handling, use switch-case (with ranges) even in
the ESnonstd case in do_con_trol().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-20-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code to reset the vc parameter parsing is repeated on two locations.
Create a helper vc_reset_params() and use it on both of them.
And instead of a 'for' loop to clear the array of parameters, use
simpler memset().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-19-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In do_con_trol()'s ESsquare case, there is already a switch (c). It is
preceded by an 'if (c == '[')'. Despite this 'if' handles a state
transition and not a modifier, move it as one of the switch cases. This
makes all the 'c' decision making more obvious there.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given all the ANSI control states are sequential in the vc_ctl_state
enum, we can define first/last constants and use them in
ansi_control_string(). It makes the test simple and allows for removal
of the 'if' (which was unnecessary at all -- the 'return' should have
returned the 'if' content directly anyway).
And remove the useless comment -- it's clear from the function
prototype.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enum for states is currently compact and undocumented. Put each
definition on a separate line and document them all using kernel-doc.
Document the same on the use sites.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to previous moves, move also "CSI ..." (i.e. vc_priv == EPecma)
handling to a separate function.
This is the last large move of code out of do_con_trol(). And despite it
is still 151 lines of code (down from 407!), it is now quite easy to
folllow the transitions of the state machine in there. ESnonstd and
ESpalette handling still can be moved away, but it won't improve that
much.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The handling of "CSI ? ..." (i.e. vc_priv == EPdec) can be easily moved
out of do_con_trol() into a separate function. This again increases
readability of do_con_trol().
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to the ASCII handling, the ESC handling can be easily moved away
from do_con_trol(). So create a new handle_esc() for that.
And add a comment with an example.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To make the do_con_trol() a bit more understandable, extract the ASCII
handling (the switch-case) to a separate function.
Other nested switch-cases will follow in the next patches.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions expect u8 as the control character. Switch the type from
'int' appropriately. The caller passing the value (do_con_write()) is
fixed as well.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some cases of the CSI switch are stuffed on one line. Put them all to a
separate line as is dictated by the coding style (and for better
readability).
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It follows naming of other similar functions. RSB stands here for Right
Square Bracket as (obviously) ']' cannot be in the function name.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Decrypt the constant values by proper enum names. This time in
setterm_command() (to be renamed to csi_RSB() in the next patches).
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CSIs without [<=>?] modifiers (ECMA) are handled in the switch-case
below this DEC switch+case handler. So move this ECMA CSI+n there too as
it fits there better.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vc_data::vc_priv is _always_ assigned before the ESgetpars case is
entered (in ESsquare). Therefore, there is no need to reset it when
leaving the ESgetpars case. Note the state is set to ESnormal few lines
above, so ESgetpars is entered only by the next CSI.
Therefore, this obfuscation can be removed.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DEC and ECMA handling of CSI+h/l is needlessly complicated. Split
these two, so that DEC is handled when the state is EPdec ('CSI ?' was
seen) and ECMA is handled in the EPecma state (no '?').
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Decrypt the constant values by proper enum names. This time in
set_mode().
Define two of them as DEC ('CSI ?') is about to be split away in the
next patches.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* make the parameter unsigned, as it is expected to be unsigned,
* make the computation easier to follow -- step-by-step, and
* don't use 85 / 2 which is only a reduced form of 255 / 6 (by a factor
3). Unlike the former, the latter can be understood.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The config HW_CONSOLE is always identical to the config VT and is not
visible in the kernel's build menuconfig. So, CONFIG_HW_CONSOLE is
redundant.
Replace all references to CONFIG_HW_CONSOLE with CONFIG_VT and remove
CONFIG_HW_CONSOLE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240108134102.601-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vc_translate_unicode() and vc_sanitize_unicode() parse input to the
UTF-8-enabled console, marking invalid byte sequences and producing Unicode
codepoints. The current algorithm follows ancient Unicode and may accept
invalid byte sequences, pass on non-existent codepoints and reject valid
sequences.
The patch restores the functions' compliance with modern Unicode (v15.1 [1]
+ many previous versions) as well as RFC 3629 [2].
1. Codepoint space is limited to 0x10FFFF.
2. "Noncharacters", such as U+FFFE, U+FFFF, are no longer invalid in
Unicode and will be accepted. Another option was to complete the set of
noncharacters (used to be just those two, now there's more) and preserve
the rejection step. This is indeed what Unicode suggests ([1] chap.
23.7) (not requires), but most codepoints are !iswprint(), so selecting
just the noncharacters seemed arbitrary and futile (and unnecessary).
This is not a security patch. I'm not aware of any present security
implications of the old code.
[1] https://www.unicode.org/versions/Unicode15.1.0
[2] https://datatracker.ietf.org/doc/html/rfc3629
Signed-off-by: Roman Žilka <roman.zilka@gmail.com>
Link: https://lore.kernel.org/r/598ab459-6ba9-4a17-b4a1-08f26a356fc0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
selection.c and vt.c still uses tabs in the kernel-doc. This misrenders the
functions in the output -- sphinx misinterprets the description. So
remove these tabs, incl. those around dashes.
'enum' keyword is needed before enum names. Fix that.
Superfluous \n after the comments are also removed. They are not
completely faulty, but this unifies all the kernel-doc in the files.
Finally fix up the cross references.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-47-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous patch, nobody sets that hook. So drop it completely.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-44-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* parameter offset: it is expected to be non-negative, so switch to
unsigned
* return type: switch from ushort to explicit u16. This is expected on
most places. And fix the remaining two places too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-42-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous patch, nobody sets that hook. So drop it completely.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-41-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-1 is the same as VESA_VSYNC_SUSPEND in all con_blank() implementations.
So we can remove this special case from vgacon now too.
Despite con_blank() of fbcon looks complicated, the "if
(!fbcon_is_inactive(vc, info))" branch is not taken as we set
"ops->graphics = 1;" few lines above. So what matters there (as in all
other blank implementations except vgacon) is if 'blank' is zero or not.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-32-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The non-zero (true) return value from consw::con_switch() means a redraw
is needed. So make this return type a bool explicitly instead of int.
The latter might imply that -Eerrors are expected. They are not.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-31-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no difference between CM_MOVE and CM_DRAW. Either of them
enables the cursor. CM_ERASE then disables cursor.
So get rid of all of them and use simple "bool enable".
Note that this propagates down to the fbcon code.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-30-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And let it call consw::con_putc() if it exists, otherwise
consw::con_putcs(). This is similar to tty_put_char().
It supports dropping unneeded duplication of code like sticon_putc() is
(see the next patch).
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-24-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In consw::con_clear():
* Height is always 1, so drop it.
* Offsets and width are always unsigned values, so re-type them as such.
This needs a new __fbcon_clear() in the fbcon code to still handle
height which might not be 1 when called internally.
Note that tests for negative count/width are left in place -- they are
taken care of in the next patches.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'init' parameter of consw::con_init() is true for the first call of
the hook on a particular console. So make the parameter a bool.
And document the hook.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-parisc@vger.kernel.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-21-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of con_debug_enter() and con_debug_leave() is ignored
on many fronts. So just don't propagate errors (the current
implementations return 0 anyway) and make the return type a void.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-20-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I didn't find definitions for ascii in the kernel yet, so define it for
non-printable characters used here.
Note we use ' ' instead of 32 on one line too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Tested-by: Helge Deller <deller@gmx.de> # parisc STI console
Link: https://lore.kernel.org/r/20240122110401.7289-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
