The loop wants to skip previously dumped addresses, so loops until
current index >= saved index. If the message fills it wants to save
the index for the next address to dump - ie., the one that did not
fit in the current message.
Currently, it is incrementing the index counter before comparing to the
saved index, and then the saved index is off by 1 - it assumes the
current address is going to fit in the message.
Change the index handling to increment only after a succesful dump.
Fixes: 502a2ffd73 ("ipv6: convert idev_list to list macros")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When submitting a bio, multiple recursive calls to make_request() may
occur. This causes the initial associate done in blkcg_bio_issue_check()
to be incorrect and reference the prior request_queue. This introduces
a helper to do reassociation when make_request() is recursively called.
Fixes: a7b39b4e96 ("blkcg: always associate a bio with a blkg")
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible for blkg creation to fail when in blk_get_rl(). In this
situation, the fallback logic returns the nearest created blkg. There is
however special handling for the request_list for the root blkcg. This
fixes the missing edge case from the earlier series changing
blk_get_rl().
Fixes: e2b0989954 ("blkcg: cleanup and make blk_get_rl use blkg_lookup_create")
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Fastabend says:
====================
This series adds a new helper bpf_msg_push_data to be used by
sk_msg programs. The helper can be used to insert extra bytes into
the message that can then be used by the program as metadata tags
among other things.
The first patch adds the helper, second patch the libbpf support,
and last patch updates test_sockmap to run msg_push_data tests.
v2: rebase after queue map and in filter.c convert int -> u32
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add options to run msg_push_data, this patch creates two more flags
in test_sockmap that can be used to specify the offset and length
of bytes to be added. The new options are --txmsg_start_push to
specify where bytes should be inserted and --txmsg_end_push to
specify how many bytes. This is analagous to the options that are
used to pull data, --txmsg_start and --txmsg_end.
In addition to adding the options tests are added to the test
suit to run the tests similar to what was done for msg_pull_data.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for new bpf_msg_push_data in libbpf.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This allows user to push data into a msg using sk_msg program types.
The format is as follows,
bpf_msg_push_data(msg, offset, len, flags)
this will insert 'len' bytes at offset 'offset'. For example to
prepend 10 bytes at the front of the message the user can,
bpf_msg_push_data(msg, 0, 10, 0);
This will invalidate data bounds so BPF user will have to then recheck
data bounds after calling this. After this the msg size will have been
updated and the user is free to write into the added bytes. We allow
any offset/len as long as it is within the (data, data_end) range.
However, a copy will be required if the ring is full and its possible
for the helper to fail with ENOMEM or EINVAL errors which need to be
handled by the BPF program.
This can be used similar to XDP metadata to pass data between sk_msg
layer and lower layers.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch is basically a resubmit of 1e91887685 ("r8169: add support
for Byte Queue Limits") which was reverted later. The problems causing
the revert seem to have been fixed in the meantime.
Only change to the original patch is that the call to
netdev_reset_queue was moved to rtl8169_tx_clear.
The Tested-by refers to a system using the RTL8168evl chip version.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a separate "slow event" handler isn't needed because all
interrupt events trigger asynchronous activity. And in case of SYSErr
we have bigger problems than performance anyway.
This patch also allows to get rid of acking interrupt events in the
NAPI poll callback.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-10-20
Here's one more bluetooth-next pull request for the 4.20 kernel.
- Added new USB ID for QCA_ROME controller
- Added debug trace support from QCA wcn3990 controllers
- Updated L2CAP to conform to latest Errata Service Release
- Fix binding to non-removable BCM43430 devices
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Use lockdep_is_held() in ipset_dereference_protected(), from Lance Roy.
2) Remove unused variable in cttimeout, from YueHaibing.
3) Add ttl option for nft_osf, from Fernando Fernandez Mancera.
4) Use xfrm family to deal with IPv6-in-IPv4 packets from nft_xfrm,
from Florian Westphal.
5) Simplify xt_osf_match_packet().
6) Missing ct helper alias definition in snmp_trap helper, from Taehee Yoo.
7) Remove unnecessary parameter in nf_flow_table_cleanup(), from Taehee Yoo.
8) Remove unused variable definitions in nft_{dup,fwd}, from Weongyo Jeong.
9) Remove empty net/netfilter/nfnetlink_log.h file, from Taehee Yoo.
10) Revert xt_quota updates remain option due to problems in the listing
path for 32-bit arches, from Maze.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The attached patch implements three optimizations:
1) Loops in flush_user_dcache_range_asm, flush_kernel_dcache_range_asm,
purge_kernel_dcache_range_asm, flush_user_icache_range_asm, and
flush_kernel_icache_range_asm are unrolled to reduce branch overhead.
2) The static branch prediction for cmpb instructions in pacache.S have
been reviewed and the operand order adjusted where necessary.
3) For flush routines in cache.c, we purge rather flush when we have no
context. The pdc instruction at level 0 is not required to write back
dirty lines to memory. This provides a performance improvement over the
fdc instruction if the feature is implemented.
Version 2 adds alternative patching.
The patch provides an average improvement of about 2%.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
The attached change removes the pte_inserted from pgtable.h. As a
result, we always flush the TLB entry when the associated page table
entry is changed.
This change doesn't impact performance signifcantly and it may catch
some cases where the TLB needs flushing but wasn't.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* remotes/lorenzo/pci/tools:
tools: PCI: Change pcitest compiling process
tools: PCI: Fix compilation warnings
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Detach resources after stopping root bus
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Add loadable kernel module support
PCI: mediatek: Add system PM support for MT2712 and MT7622
PCI: mediatek: Fixup MSI enablement logic by enabling MSI before clocks
PCI: mediatek: Convert to use pci_host_probe()
PCI: mediatek: Remove the redundant dev->pm_domain check
PCI: mediatek: Fix class type for MT7622 to PCI_CLASS_BRIDGE_PCI
PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic
PCI: mediatek: Fix unchecked return value
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham
I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham I)
- Use SYSCON API to get Keystone control module device IDs (Kishon Vijay
Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/keystone:
PCI: keystone: Cleanup macros defined in pci-keystone.c
PCI: keystone: Reorder header file in alphabetical order
PCI: keystone: Add debug error message for all errors
PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status
PCI: keystone: Cleanup ks_pcie_link_up()
PCI: keystone: Cleanup set_dbi_mode() and get_dbi_mode()
PCI: keystone: Cleanup outbound window configuration
PCI: keystone: Get number of outbound windows from DT
PCI: keystone: Cleanup configuration space access
PCI: keystone: Invoke runtime PM APIs to enable clock
PCI: keystone: Cleanup PHY handling
PCI: keystone: Use SYSCON APIs to get device ID from control module
dt-bindings: PCI: keystone: Add bindings to get device control module
PCI: keystone: Use uniform function naming convention
PCI: keystone: Remove redundant platform_set_drvdata() invocation
PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c
PCI: keystone: Remove unused argument from ks_dw_pcie_host_init()
PCI: keystone: Do not initiate link training multiple times
PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link()
PCI: keystone: Use quirk to set MRRS for PCI host bridge
PCI: keystone: Use quirk to limit MRRS for K2G
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Write MSI data with 32bits
PCI: cadence: Use AXI region 0 to signal interrupts from EP
PCI: cadence: Correct probe behaviour when failing to get PHY
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
* pci/virtualization:
PCI/IOV: Remove unnecessary include of <linux/pci-ats.h>
PCI/IOV: Use VF0 cached config space size for other VFs
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
* pci/peer-to-peer:
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
PCI/P2PDMA: Add sysfs group to display p2pmem stats
PCI/P2PDMA: Support peer-to-peer memory
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state (Keith
Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and re-enumerate
devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets (Keith
Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable from
cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments (Keith
Busch)
* pci/hotplug:
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI/AER: Use threaded IRQ for bottom half
PCI/AER: Use kfifo_in_spinlocked() to insert locked elements
PCI/AER: Use kfifo for tracking events instead of reimplementing it
PCI/AER: Remove error source from AER struct aer_rpc
PCI/AER: Remove unused aer_error_resume()
PCI: Uninline PCI bus accessors for better ftracing
PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls
PCI: pnv_php: Use kmemdup()
PCI: cpqphp: Remove set but not used variable 'physical_slot'
PCI/ERR: Remove duplicated include from err.c
PCI: Equalize hotplug memory and io for occupied and empty slots
PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
ACPI / property: Allow multiple property compatible _DSD entries
PCI/PME: Implement runtime PM callbacks
PCI: pciehp: Implement runtime PM callbacks
PCI/portdrv: Add runtime PM hooks for port service drivers
PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
PCI: pciehp: Do not handle events if interrupts are masked
PCI: pciehp: Disable hotplug interrupt during suspend
PCI / ACPI: Enable wake automatically for power managed bridges
PCI: Do not skip power-managed bridges in pci_enable_wake()
PCI: Make link active reporting detection generic
PCI: Unify device inaccessible
PCI/ERR: Always report current recovery status for udev
PCI/ERR: Simplify broadcast callouts
PCI/ERR: Run error recovery callbacks for all affected devices
PCI/ERR: Handle fatal error recovery
PCI/ERR: Use slot reset if available
PCI/AER: Don't read upstream ports below fatal errors
PCI/AER: Take reference on error devices
PCI/DPC: Save and restore config state
PCI: portdrv: Restore PCI config state on slot reset
PCI: portdrv: Initialize service drivers directly
PCI: hotplug: Document TODOs
PCI: hotplug: Embed hotplug_slot
PCI: hotplug: Drop hotplug_slot_info
PCI: hotplug: Constify hotplug_slot_ops
PCI: pciehp: Reshuffle controller struct for clarity
PCI: pciehp: Rename controller struct members for clarity
PCI: pciehp: Unify controller and slot structs
PCI: pciehp: Tolerate Presence Detect hardwired to zero
PCI: pciehp: Drop hotplug_slot_ops wrappers
PCI: pciehp: Drop unnecessary includes
PCI: pciehp: Differentiate between surprise and safe removal
PCI: Simplify disconnected marking
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick
Talbert)
* pci/aspm:
PCI/ASPM: Do not initialize link state when aspm_disabled is set
PCI/ACPI: Allow _OSC presence to be optional for PCI
PCI/ACPI: Correct error message for ASPM disabling
PCI/ASPM: Fix link_state teardown on device removal
DMA needs to be cleaned up not only on timeout, but on all errors where
it has been setup before.
Fixes: 73e8b05283 ("i2c: rcar: add DMA support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add an entry for the Broadcom STB I2C controller in the MAINTAINERS file.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: fixed sorting and a whitespace error]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Ingo writes:
"x86 fixes:
It's 4 misc fixes, 3 build warning fixes and 3 comment fixes.
In hindsight I'd have left out the 3 comment fixes to make the pull
request look less scary at such a late point in the cycle. :-/"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU
x86/fpu: Remove second definition of fpu in __fpu__restore_sig()
x86/entry/64: Further improve paranoid_entry comments
x86/entry/32: Clear the CS high bits
x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS
x86/time: Correct the attribute on jiffies' definition
x86/entry: Add some paranoid entry/exit CR3 handling comments
x86/percpu: Fix this_cpu_read()
x86/tsc: Force inlining of cyc2ns bits
Ingo writes:
"scheduler fixes:
Two fixes: a CFS-throttling bug fix, and an interactivity fix."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the min_vruntime update logic in dequeue_entity()
sched/fair: Fix throttle_list starvation with low CFS quota
Ingo writes:
"perf fixes:
Misc perf tooling fixes."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Stop fallbacking to kallsyms for vdso symbols lookup
perf tools: Pass build flags to traceevent build
perf report: Don't crash on invalid inline debug information
perf cpu_map: Align cpu map synthesized events properly.
perf tools: Fix tracing_path_mount proper path
perf tools: Fix use of alternatives to find JDIR
perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus
perf vendor events intel: Fix wrong filter_band* values for uncore events
Revert "perf tools: Fix PMU term format max value calculation"
tools headers uapi: Sync kvm.h copy
tools arch uapi: Sync the x86 kvm.h copy
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses. These tables are radix trees,
we allocate indirect levels when they are written to. Since
the memory allocation is problematic in real mode, we have 2 accessors
to the entries:
- for virtual mode: it allocates the memory and it is always expected
to return non-NULL;
- fr real mode: it does not allocate and can return NULL.
Also, DMA windows can span to up to 55 bits of the address space and since
we never have this much RAM, such windows are sparse. However currently
the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory.
Since we maintain a userspace addresses table for VFIO which is a mirror
of the hardware table, we can use it to know which parts of the DMA
window have not been mapped and skip these so does this patch.
The bare metal systems do not have this problem as they use a bypass mode
of a PHB which maps RAM directly.
This helps a lot with sparse DMA windows, reducing the shutdown time from
about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest.
Just skipping the last level seems to be good enough.
As non-allocating accessor is used now in virtual mode as well, rename it
from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We've been getting checksum errors involving small UDP packets, usually
59B packets with 1 extra non-zero padding byte. netdev_rx_csum_fault()
has been complaining that HW is providing bad checksums. Turns out the
problem is in pskb_trim_rcsum_slow(), introduced in commit 88078d98d1
("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends").
The source of the problem is that when the bytes we are trimming start
at an odd address, as in the case of the 1 padding byte above,
skb_checksum() returns a byte-swapped value. We cannot just combine this
with skb->csum using csum_sub(). We need to use csum_block_sub() here
that takes into account the parity of the start address and handles the
swapping.
Matches existing code in __skb_postpull_rcsum() and esp_remove_trailer().
Fixes: 88078d98d1 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At least UDP / TCP stacks can now cook skbs with a tstamp using
MONOTONIC base (or arbitrary values with SCM_TXTIME)
Since loopback driver does not call (directly or indirectly)
skb_scrub_packet(), we need to clear skb->tstamp so that
net_timestamp_check() can eventually resample the time,
using ktime_get_real().
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=ZlVF
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19 final (part 2)
Looked like two stragglers snuck in, one very urgent the pageflipping
was missing a reference that could result in a GPF on non-i915
drivers, the other is an overflow in the sun4i dotclock calcs
resulting in a mode not getting set."
* tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm:
drm/sun4i: Fix an ulong overflow in the dotclock driver
drm: Get ref on CRTC commit object when waiting for flip_done
The first two patches fix handling of unsigned type, and handling
of a space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic events.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW8pMwxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn2jAQCV4leBtN9EAax4B9Mmy4e5oYGE0SDF
Qq0f/Zb1SLYbTwD/Wdo+mqOAc9EFYkrxRjvgufgqM4bOUufW4fOQnqqPnwI=
=GS2b
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: A few small fixes to synthetic events
Masami found some issues with the creation of synthetic events. The
first two patches fix handling of unsigned type, and handling of a
space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic
events."
* tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add synthetic event syntax testcase
tracing: Fix synthetic event to allow semicolon at end
tracing: Fix synthetic event to accept unsigned modifier
Dmitry writes:
"Input updates for 4.19-rc8
Just an addition to elan touchpad driver ACPI table."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
- Fix ulong overflow in sun4i
- Fix a serious GPF in waiting for flip_done from commit_tail().
-----BEGIN PGP SIGNATURE-----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=3i14
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Second pull request for v4.19:
- Fix ulong overflow in sun4i
- Fix a serious GPF in waiting for flip_done from commit_tail().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/97d1ed42-1d99-fcc5-291e-cd1dc29a4252@linux.intel.com
Trivial non-functional change added to simplify getting multiple
references to device pointer in lpc_eth_drv_probe().
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A trivial change which removes an unused local variable, the issue
is reported as a compile time warning:
drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
drivers/net/ethernet/nxp/lpc_eth.c:1250:21: warning: variable 'phydev' set but not used [-Wunused-but-set-variable]
struct phy_device *phydev;
^~~~~~
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAC controller device is available on NXP LPC32xx platform only,
and the LPC32xx platform supports OF builds only, so additional
checks in the device driver are not needed.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The change removes all unnecessary included headers from the driver
source code, the remaining list is sorted in alphabetical order.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuiko Oshino says:
====================
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
This is the initial driver for Microchip KSZ9131 10/100/1000 Ethernet PHY
v3:
- KSZ9131 uses picosecond units for values of devicetree properties.
- rewrite micrel.c and micrel-ksz90x1.txt to use the picosecond values.
v2:
- Creating a series from two related patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a problem introduced by:
commit 2cde6acd49 ("netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock")
When using netconsole on a bond, __netpoll_cleanup can asynchronously
recurse multiple times, each __netpoll_free_async call can result in
more __netpoll_free_async's. This means there is now a race between
cleanup_work queues on multiple netpoll_info's on multiple devices and
the configuration of a new netpoll. For example if a netconsole is set
to enable 0, reconfigured, and enable 1 immediately, this netconsole
will likely not work.
Given the reason for __netpoll_free_async is it can be called when rtnl
is not locked, if it is locked, we should be able to execute
synchronously. It appears to be locked everywhere it's called from.
Generalize the design pattern from the teaming driver for current
callers of __netpoll_free_async.
CC: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
