IIUC the TIPC msg helpers are not meant to provide
and exhaustive API, so remove the unused ones.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not used since added in v3.8.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stubs under !CONFIG_IPV6 were missed when real functions
got deleted ca. v3.13.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No callers since v5.7, the initial use case seems pretty
esoteric so removing this should not harm the completeness
of the API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NCI and HCI wrappers for nfc_set_vendor_cmds() exist,
use them. We could also remove the helpers.
It's a coin toss.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only caller of mii_lpa_to_linkmode_lpa_sgmii()
disappeared in v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prefer kcalloc() to kzalloc(array_size()) for allocating an array.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following warning in mtk_star_emac.c if CONFIG_OF is not set:
drivers/net/ethernet/mediatek/mtk_star_emac.c:1559:34:
warning: unused variable 'mtk_star_of_match' [-Wunused-const-variable]
static const struct of_device_id mtk_star_of_match[] = {
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz says:
====================
net/fsl: xgmac_mdio: Preamble suppression and custom MDC frequencies
The first patch removes the docs for a binding that has never been
supported by the driver as far as I can see. This is a bit of a
mystery to me, maybe Freescale/NXP had/has support for it in an
internal version?
We then start working on the xgmac_mdio driver, converting the driver
to exclusively use managed resources, thereby simplifying the error
paths. Suggested by Andrew.
Preamble suppression is then added, followed by MDC frequency
customization. Neither code will change any bits if the corresponding
dt properties are not specified, so as to not trample on any setup
done by the bootloader, which boards might have relied on up to now.
Finally, we document the new bindings.
Tested on a T1023 based board.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver now supports the standard "clock-frequency" and
"suppress-preamble" properties, do document them in the binding
description.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support the standard "clock-frequency" attribute to set the generated
MDC frequency. If not specified, the driver will leave the divisor
bits untouched.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support the standard "suppress-preamble" attribute to disable preamble
generation.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
All of the resources used by this driver has managed interfaces, so
use them. Heed the warning in the comment before platform_get_resource
and use a bare devm_ioremap to allow for non-exclusive access to the
IO memory.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This property has never been supported by the driver. The kernel has
settled on "clock-frequency" as the standard name for this binding, so
once that is supported we will document that instead.
Fixes: 7f93c9d90f ("power/fsl: add MDIO dt binding for FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different netns has different requirement on the setting of min_adv_mss
sysctl which the advertised MSS will be never lower than.
Enable min_adv_mss to be configured per network namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: mvneta: use .mac_select_pcs()
This series converts mvneta to use the .mac_select_pcs() like eventually
everything else will be. mvneta is slightly more involved because we
need to rearrange the initialisation first to ensure everything required
is initialised prior to phylink_create() being called.
Tested locally on SolidRun Clearfog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert mvneta to use the mac_select_interface rather than using
phylink_set_pcs(). The intention here is to unify the approach for
PCS and eventually remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Re-order the mvneta initialisation to move devm based resources and
easy setup earlier in the probe function. The primary reason for this
is to allow us to switch the driver to use phylink's mac_select_pcs()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock says:
====================
at803x fiber/SFP support
Add support for 1000Base-X fiber modes to the at803x PHY driver, as
well as support for connecting a downstream SFP cage.
Changes since v3:
-Renamed some constants with OHM suffix for clarity
Changes since v2:
-fixed tabs/spaces issue in one patch
Changes since v1:
-moved page selection to config_init so it is handled properly
after suspend/resume
-added explicit check for empty sfp_support bitmask
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for downstream SFP cages for AR8031 and AR8033. This is
primarily intended for fiber modules or direct-attach cables, however
copper modules which work in 1000Base-X mode may also function. Such
modules are allowed with a warning.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously this driver always forced the copper page to be selected,
however for AR8031 in 100Base-FX or 1000Base-X modes, the fiber page
needs to be selected. Set the appropriate mode based on the hardware
mode_cfg strap selection.
Enable the appropriate interrupt bits to detect fiber-side link up
or down events.
Update config_aneg and read_status methods to use the appropriate
Clause 37 calls when fiber mode is in use.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fix to select the copper page on AR8031 was being done in the probe
function rather than config_init, so it would not be redone after resume
from suspend. Move this to config_init so it is always redone when
needed.
Fixes: c329e5afb4 ("net: phy: at803x: select correct page on config init")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update comments to only use kdoc style comments, starting with '/**',
for kdoc.
Flagged by ./scripts/kernel-doc
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220126090803.5582-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c:359:25: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/net/ethernet/mellanox/mlxsw/spectrum1_kvdl.c:229:24: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert dpaa2-mac to use the mac_select_pcs() interface rather than
using phylink_set_pcs(). The intention here is to unify the approach
for PCS and eventually to remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: axienet: modernise pcs implementation
These two patches modernise the Xilinx axienet PCS implementation to
use the phylink split PCS support.
The first patch adds split PCS support and makes use of the newly
introduced mac_select_pcs() function, which is the preferred way to
conditionally attach a PCS.
The second patch cleans up the use of mdiobus_write() since we now have
bus accessors for mdio devices.
There should be no functional change to the driver.
This series was previously sent CFT on the 16th December (message ID
Ybs1cdM3KUTsq4Vx@shell.armlinux.org.uk), and feedback addressed. CFT v2
sent 4th January (message ID YdQlI8gcVwg2sR+5@shell.armlinux.org.uk).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0ebecb2644 ("net: mdio: Add helper functions for accessing
MDIO devices") added support for mdiodev accessor operations that
neatly wrap the mdiobus accessor operations. Since we are dealing with
a mdio device here, update the driver to use mdiodev_write().
Tested-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert axienet to use the phylink_pcs layer, resulting in it no longer
being a legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Add RTC mode for PTP
This series adds Real Time Clock (RTC) mode for PTP timestamping. In
RTC mode, the 64-bit time value is programmed into the NIC's PTP
hardware clock (PHC). Prior to this, the PHC is running as a free
counter. For example, in multi-function environment, we need to run
PTP in RTC mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In Multi-host environment, when the PHC is updated by one host,
an async message from firmware will be sent to other hosts.
Re-initialize the timecounter when the driver receives this
async message.
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The adjusted time is set in the PHC in RTC mode. We also need to
update the snapshots ptp->current_time and ptp->old_time when the
time is adjusted.
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for RTC mode if it is supported by firmware. In RTC
mode, the PHC is set to the 64-bit clock. Because the legacy interface
is 48-bit, the driver still has to keep track of the upper 16 bits and
handle the rollover.
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Making the ptp free and timecounter initialization code into separate
functions so that later patches can use them.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main changes are PTP support for RTC, additional NVM error codes,
backing store v2 firmware APIs.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: stmmac/xpcs: modernise PCS support
This series updates xpcs and stmmac for the recent changes to phylink
to better support split PCS and to get rid of private MAC validation
functions.
This series is slightly more involved than other conversions as stmmac
has already had optional proper split PCS support.
The first six patches of this series were originally posted on 16th
December for CFT, and Wong Vee Khee reported his Intel Elkhart Lake
setup was fine the first six these. However, no tested-by was given.
The patches:
1) Provide a function to query the xpcs for the interface modes that
are supported.
2) Populates the MAC capabilities and switches stmmac_validate() to use
phylink_get_linkmodes(). We do not use phylink_generic_validate() yet
as (a) we do not always have the supported interfaces populated, and
(b) the existing code does not restrict based on interface. There
should be no functional effect from this patch.
3) Populates phylink's supported interfaces from the xpcs when the xpcs
is configured by firmware and also the firmware configured interface
mode. Note: this will restrict stmmac to only supporting these
interfaces modes - stmmac maintainers need to verify that this
behaviour is acceptable.
4) stmmac_validate() tail-calls xpcs_validate(), but we don't need it to
now that PCS have their own validation method. Convert stmmac and
xpcs to use this method instead.
5) xpcs sets the poll field of phylink_pcs to true, meaning xpcs
requires its status to be polled. There is no need to also set the
phylink_config.pcs_poll. Remove this.
6) Switch to phylink_generic_validate(). This is probably the most
contravertial change in this patch set as this will cause the MAC to
restrict link modes based on the interface mode. From an inspection
of the xpcs driver, this should be safe, as XPCS only further
restricts the link modes to a subset of these (whether that is
correct or not is not an issue I am addressing here.) For
implementations that do not use xpcs, this is a more open question
and needs feedback from stmmac maintainers.
7) Convert to use mac_select_pcs() rather than phylink_set_pcs() to set
the PCS - the intention is to eventually remove phylink_set_pcs()
once there are no more users of this.
v2: fix signoff and temporary warning in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert stmmac to use the mac_select_pcs() interface rather than using
phylink_set_pcs(). The intention here is to unify the approach for PCS
and eventually to remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert stmmac to use phylink_generic_validate() now that we have the
MAC capabilities and supported interfaces filled in, and we have the
PCS validation handled via the PCS operations.
Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
