A new cpufreq governor flag will be added subsequently, so replace
the bool dynamic_switching fleid in struct cpufreq_governor with a
flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for
the "dynamic switching" governors instead of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit ce3d31ad3c ("arm64/smp: Move rcu_cpu_starting() earlier") ensured
that RCU is informed early about incoming CPUs that might end up calling
into printk() before they are online. However, if such a CPU fails the
early CPU feature compatibility checks in check_local_cpu_capabilities(),
then it will be powered off or parked without informing RCU, leading to
an endless stream of stalls:
| rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
| rcu: 2-O...: (0 ticks this GP) idle=002/1/0x4000000000000000 softirq=0/0 fqs=2593
| (detected by 0, t=5252 jiffies, g=9317, q=136)
| Task dump for CPU 2:
| task:swapper/2 state:R running task stack: 0 pid: 0 ppid: 1 flags:0x00000028
| Call trace:
| ret_from_fork+0x0/0x30
Ensure that the dying CPU invokes rcu_report_dead() prior to being powered
off or parked.
Cc: Qian Cai <cai@redhat.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Qian Cai <cai@redhat.com>
Link: https://lore.kernel.org/r/20201105222242.GA8842@willie-the-truck
Link: https://lore.kernel.org/r/20201106103602.9849-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There is a bug when passing zero to PTR_ERR() and return.
Fix the smatch error.
Fixes: c4d0bfb450 ("bpf: Add bpf_snprintf_btf helper")
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1604735144-686-1-git-send-email-wangqing@vivo.com
Currently perf_event_attr::exclusive can be used to ensure an
event(group) is the sole group scheduled on the PMU. One consequence
is that when you have a pinned event (say the watchdog) you can no
longer have regular exclusive event(group)s.
Inspired by the fact that !pinned events are considered less strict,
allow !pinned,exclusive events to share the PMU with pinned,!exclusive
events.
Pinned,exclusive is still fully exclusive.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201029162902.105962225@infradead.org
Commit 9e6302056f ("perf: Use hrtimers for event multiplexing")
placed the hrtimer (re)start call in the wrong place. Instead of
capturing all scheduling failures, it only considered the PMU failure.
The result is that groups using perf_event_attr::exclusive are no
longer rotated.
Fixes: 9e6302056f ("perf: Use hrtimers for event multiplexing")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201029162902.038667689@infradead.org
Since event_sched_out() clears cpuctx->exclusive upon removal of an
exclusive event (and only group leaders can be exclusive), there is no
point in group_sched_out() trying to do it too. It is impossible for
cpuctx->exclusive to still be set here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201029162901.904060564@infradead.org
struct perf_sample_data lives on-stack, we should be careful about it's
size. Furthermore, the pt_regs copy in there is only because x86_64 is a
trainwreck, solve it differently.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201030151955.258178461@infradead.org
__perf_output_begin() has an on-stack struct perf_sample_data in the
unlikely case it needs to generate a LOST record. However, every call
to perf_output_begin() must already have a perf_sample_data on-stack.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201030151954.985416146@infradead.org
The exit_pi_state_list() function calls put_pi_state() with IRQs disabled
and is not expecting that IRQs will be enabled inside the function.
Use the _irqsave() variant so that IRQs are restored to the original state
instead of being enabled unconditionally.
Fixes: 153fbd1226 ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda
current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.
Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parser.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+oC4ATHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXveD/4mIAq1umSj/YdThj65S6nAHjhW1MjO
VxGRNSEiUxOld6OnxZlyup1q4NvyYB1cVk71jLjdBIvEK/ANdq3Cd+PVB5tAAoNK
726zrPlOXx4NJulq2q17ygazZQgOtl/5QsYovS0PymCyyvwfz56yr/OfPRThCe+S
gJZs+zt8uunhEKz1J7lki/vn7D6bHRdaL8yTLabsPIQ296WXrUd2NS4fuanFNyLO
kxETMAECyy77q17dgClFFDheyLHAotoySLm6qSwNeWUPFwlCmoCbHgzSBoryIlH5
DMlwA5iuA5qVv/4jlZ0+WvVWeSWOyF0boZ1cZI+r4nitVvdwnnxTgXcyuTxDSggu
nygQqLlTIQ31dwQleAfKrooJfwk9nB5uLEQkTwdx0BQwdHhvb7usnNEcIMx8WVFf
86LorPlfbKrUTD7PWj7zg3x32GNv/nWjuDnzD0NW6BPKqVy6XaRZtaG2WyYfB9YW
9KXpfsxjDeTBrZK5b/YOna1ah00J+2hwIL7sUhVf24aOmmImy3+Yqe2bQOlR/JGs
yIBFOAPCWrl7AJOwziMD2NQGCTzk9hqKRyhy1WtPC/L0uohf16/xbnViyL1Ijhud
Hzu09qoo8EXYbSwRcHQ+qK39s9fwDK1yvPp+k4XGXS/v94YN0W5rd3o49bTMvhxE
T8CKfwngsBzeYg==
=r2wz
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"A single fix for the perf core plugging a memory leak in the address
filter parser"
* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix a memory leak in perf_event_parse_addr_filter()
underlying RT mutex was not handled correctly and triggering a BUG()
instead of treating it as another variant of retry condition.
-----BEGIN PGP SIGNATURE-----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=PX5t
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Thomas Gleixner:
"A single fix for the futex code where an intermediate state in the
underlying RT mutex was not handled correctly and triggering a BUG()
instead of treating it as another variant of retry condition"
* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Handle transient "ownerless" rtmutex state correctly
- Fix the fallout of the IPI as interrupt conversion in Kconfig and the
BCM2836 interrupt chip driver/
- Fixes for interrupt affinity setting and the handling of hierarchical
irq domains in the SiFive PLIC driver.
- Make the unmapped event handling in the TI SCI driver work correctly.
- A few minor fixes and cleanups in various chip drivers and Kconfig.
-----BEGIN PGP SIGNATURE-----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=HUPi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Fix the fallout of the IPI as interrupt conversion in Kconfig and
the BCM2836 interrupt chip driver
- Fixes for interrupt affinity setting and the handling of
hierarchical irq domains in the SiFive PLIC driver
- Make the unmapped event handling in the TI SCI driver work
correctly
- A few minor fixes and cleanups in various chip drivers and Kconfig"
* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
irqchip/ti-sci-inta: Add support for unmapped event handling
dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
irqchip/sifive-plic: Fix chip_data access within a hierarchy
irqchip/sifive-plic: Fix broken irq_set_affinity() callback
irqchip/stm32-exti: Add all LP timer exti direct events support
irqchip/bcm2836: Fix missing __init annotation
irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
irqchip/mst: Make mst_intc_of_init static
irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
that the lockdep interrupt state needs not to be established before calling
the RCU check.
-----BEGIN PGP SIGNATURE-----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=ZSdr
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code fix from Thomas Gleixner:
"A single fix for the generic entry code to correct the wrong
assumption that the lockdep interrupt state needs not to be
established before calling the RCU check"
* tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix the incorrect ordering of lockdep and RCU check
Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:
Task Prio Operation
T1 120 lock(F)
T2 120 lock(F) -> blocks (top waiter)
T3 50 (RT) lock(F) -> boosts T1 and blocks (new top waiter)
XX timeout/ -> wakes T2
signal
T1 50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2 120 cleanup -> try_to_take_mutex() fails because T3 is the top waiter
and the lower priority T2 cannot steal the lock.
-> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()
The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.
The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().
Drop the locks, so that T3 can make progress, and then try the fixup again.
Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.
[ tglx: Wrote comment and changelog ]
Fixes: c1e2f0eaf0 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de
As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().
There are three possible ways that this could happen:
- It could be allocated twice on subsequent iterations through the loop,
- or leaked on the success path,
- or on the failure path.
Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.
We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.
This fixes the leak. No other side effects expected.
[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]
Fixes: 375637bc52 ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
kernel/events/core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current logic checks if the name of the BTF type passed in
attach_btf_id starts with "bpf_lsm_", this is not sufficient as it also
allows attachment to non-LSM hooks like the very function that performs
this check, i.e. bpf_lsm_verify_prog.
In order to ensure that this verification logic allows attachment to
only LSM hooks, the LSM_HOOK definitions in lsm_hook_defs.h are used to
generate a BTF_ID set. Upon verification, the attach_btf_id of the
program being attached is checked for presence in this set.
Fixes: 9e4e01dfd3 ("bpf: lsm: Implement attach, detach and execution")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105230651.2621917-1-kpsingh@chromium.org
The currently available bpf_get_current_task returns an unsigned integer
which can be used along with BPF_CORE_READ to read data from
the task_struct but still cannot be used as an input argument to a
helper that accepts an ARG_PTR_TO_BTF_ID of type task_struct.
In order to implement this helper a new return type, RET_PTR_TO_BTF_ID,
is added. This is similar to RET_PTR_TO_BTF_ID_OR_NULL but does not
require checking the nullness of returned pointer.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-6-kpsingh@chromium.org
Similar to bpf_local_storage for sockets and inodes add local storage
for task_struct.
The life-cycle of storage is managed with the life-cycle of the
task_struct. i.e. the storage is destroyed along with the owning task
with a callback to the bpf_task_storage_free from the task_free LSM
hook.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in
the security blob which are now stackable and can co-exist with other
LSMs.
The userspace map operations can be done by using a pid fd as a key
passed to the lookup, update and delete operations.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-3-kpsingh@chromium.org
Usage of spin locks was not allowed for tracing programs due to
insufficient preemption checks. The verifier does not currently prevent
LSM programs from using spin locks, but the helpers are not exposed
via bpf_lsm_func_proto.
Based on the discussion in [1], non-sleepable LSM programs should be
able to use bpf_spin_{lock, unlock}.
Sleepable LSM programs can be preempted which means that allowng spin
locks will need more work (disabling preemption and the verifier
ensuring that no sleepable helpers are called when a spin lock is held).
[1]: https://lore.kernel.org/bpf/20201103153132.2717326-1-kpsingh@chromium.org/T/#md601a053229287659071600d3483523f752cd2fb
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-2-kpsingh@chromium.org
make clang-analyzer on x86_64 defconfig caught my attention with:
kernel/printk/printk_ringbuffer.c:885:3: warning:
Value stored to 'desc' is never read [clang-analyzer-deadcode.DeadStores]
desc = to_desc(desc_ring, head_id);
^
Commit b6cf8b3f33 ("printk: add lockless ringbuffer") introduced
desc_reserve() with this unneeded dead-store assignment.
As discussed with John Ogness privately, this is probably just some minor
left-over from previous iterations of the ringbuffer implementation. So,
simply remove this unneeded dead assignment to make clang-analyzer happy.
As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.
No functional change. No change to object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20201106034005.18822-1-lukas.bulwahn@gmail.com
Currently key_size of hashtab is limited to MAX_BPF_STACK.
As the key of hashtab can also be a value from a per cpu map it can be
larger than MAX_BPF_STACK.
The use-case for this patch originates to implement allow/disallow
lists for files and file paths. The maximum length of file paths is
defined by PATH_MAX with 4096 chars including nul.
This limit exceeds MAX_BPF_STACK.
Changelog:
v5:
- Fix cast overflow
v4:
- Utilize BPF skeleton in tests
- Rebase
v3:
- Rebase
v2:
- Add a test for bpf side
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201029201442.596690-1-dev@der-flo.net
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Fix build error when BPF_SYSCALL is not set/enabled but BPF_PRELOAD is
by making BPF_PRELOAD depend on BPF_SYSCALL.
ERROR: modpost: "bpf_preload_ops" [kernel/bpf/preload/bpf_preload.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105195109.26232-1-rdunlap@infradead.org
- Fix off-by-one error in retrieving the context buffer for trace_printk()
- Fix off-by-one error in stack nesting limit
- Fix recursion to not make all NMI code false positive as recursing
- Stop losing events in function tracing when transitioning between irq context
- Stop losing events in ring buffer when transitioning between irq context
- Fix return code of error pointer in parse_synth_field() to prevent
NULL pointer dereference.
- Fix false positive of NMI recursion in kprobe event handling
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX6QqmRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWiAQCKf3xblmQDcge2BLQPy2H7ih5VCSSb
vDPrQKgLa35pSgEAhGj7mgAKxb6kDbae1BqPorfa/qn9Bi13XfRNTxBK2Qw=
=zKfd
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix off-by-one error in retrieving the context buffer for
trace_printk()
- Fix off-by-one error in stack nesting limit
- Fix recursion to not make all NMI code false positive as recursing
- Stop losing events in function tracing when transitioning between irq
context
- Stop losing events in ring buffer when transitioning between irq
context
- Fix return code of error pointer in parse_synth_field() to prevent
NULL pointer dereference.
- Fix false positive of NMI recursion in kprobe event handling
* tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Tell lockdep about kprobe nesting
tracing: Make -ENOMEM the default error for parse_synth_field()
ring-buffer: Fix recursion protection transitions between interrupt context
tracing: Fix the checking of stackidx in __ftrace_trace_stack
ftrace: Handle tracing when switching between context
ftrace: Fix recursion check for NMI test
tracing: Fix out of bounds write in get_trace_buf
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy
limits updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal
of OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping
driver (Tom Rix).
-----BEGIN PGP SIGNATURE-----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=lKQA
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes: a5497bab5f ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
Since the kprobe handlers have protection that prohibits other handlers from
executing in other contexts (like if an NMI comes in while processing a
kprobe, and executes the same kprobe, it will get fail with a "busy"
return). Lockdep is unaware of this protection. Use lockdep's nesting api to
differentiate between locks taken in INT3 context and other context to
suppress the false warnings.
Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
kcov_common_handle is a method that is used to obtain a "default" KCOV
remote handle of the current process. The handle can later be passed
to kcov_remote_start in order to collect coverage for the processing
that is initiated by one process, but done in another. For details see
Documentation/dev-tools/kcov.rst and comments in kernel/kcov.c.
Presently, if kcov_common_handle is called in an IRQ context, it will
return a handle for the interrupted process. This may lead to
unreliable and incorrect coverage collection.
Adjust the behavior of kcov_common_handle in the following way. If it
is called in a task context, return the common handle for the
currently running task. Otherwise, return 0.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
parse_synth_field() returns a pointer and requires that errors get
surrounded by ERR_PTR(). The ret variable is initialized to zero, but should
never be used as zero, and if it is, it could cause a false return code and
produce a NULL pointer dereference. It makes no sense to set ret to zero.
Set ret to -ENOMEM (the most common error case), and have any other errors
set it to something else. This removes the need to initialize ret on *every*
error branch.
Fixes: 761a8c58db ("tracing, synthetic events: Replace buggy strcat() with seq_buf operations")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The recursion protection of the ring buffer depends on preempt_count() to be
correct. But it is possible that the ring buffer gets called after an
interrupt comes in but before it updates the preempt_count(). This will
trigger a false positive in the recursion code.
Use the same trick from the ftrace function callback recursion code which
uses a "transition" bit that gets set, to allow for a single recursion for
to handle transitions between contexts.
Cc: stable@vger.kernel.org
Fixes: 567cd4da54 ("ring-buffer: User context bit recursion checking")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
removed various __user annotations from function signatures as part of
its refactoring.
It also removed the __user annotation for proc_dohung_task_timeout_secs()
at its declaration in sched/sysctl.h, but not at its definition in
kernel/hung_task.c.
Hence, sparse complains:
kernel/hung_task.c:271:5: error: symbol 'proc_dohung_task_timeout_secs' redeclared with different type (incompatible argument 3 (different address spaces))
Adjust the annotation at the definition fitting to that refactoring to make
sparse happy again, which also resolves this warning from sparse:
kernel/hung_task.c:277:52: warning: incorrect type in argument 3 (different address spaces)
kernel/hung_task.c:277:52: expected void *
kernel/hung_task.c:277:52: got void [noderef] __user *buffer
No functional change. No change in object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ignatov <rdna@fb.com>
Link: https://lkml.kernel.org/r/20201028130541.20320-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a small race window when a delayed work is being canceled and
the work still might be queued from the timer_fn:
CPU0 CPU1
kthread_cancel_delayed_work_sync()
__kthread_cancel_work_sync()
__kthread_cancel_work()
work->canceling++;
kthread_delayed_work_timer_fn()
kthread_insert_work();
BUG: kthread_insert_work() should not get called when work->canceling is
set.
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201014083030.16895-1-qiang.zhang@windriver.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This testcase
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <pthread.h>
#include <assert.h>
void *tf(void *arg)
{
return NULL;
}
int main(void)
{
int pid = fork();
if (!pid) {
kill(getpid(), SIGSTOP);
pthread_t th;
pthread_create(&th, NULL, tf, NULL);
return 0;
}
waitpid(pid, NULL, WSTOPPED);
ptrace(PTRACE_SEIZE, pid, 0, PTRACE_O_TRACECLONE);
waitpid(pid, NULL, 0);
ptrace(PTRACE_CONT, pid, 0,0);
waitpid(pid, NULL, 0);
int status;
int thread = waitpid(-1, &status, 0);
assert(thread > 0 && thread != pid);
assert(status == 0x80137f);
return 0;
}
fails and triggers WARN_ON_ONCE(!signr) in do_jobctl_trap().
This is because task_join_group_stop() has 2 problems when current is traced:
1. We can't rely on the "JOBCTL_STOP_PENDING" check, a stopped tracee
can be woken up by debugger and it can clone another thread which
should join the group-stop.
We need to check group_stop_count || SIGNAL_STOP_STOPPED.
2. If SIGNAL_STOP_STOPPED is already set, we should not increment
sig->group_stop_count and add JOBCTL_STOP_CONSUME. The new thread
should stop without another do_notify_parent_cldstop() report.
To clarify, the problem is very old and we should blame
ptrace_init_task(). But now that we have task_join_group_stop() it makes
more sense to fix this helper to avoid the code duplication.
Reported-by: syzbot+3485e3773f7da290eecc@syzkaller.appspotmail.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <christian@brauner.io>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201019134237.GA18810@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cpufreq policy's frequency limits (min/max) can get changed at any
point of time, while schedutil is trying to update the next frequency.
Though the schedutil governor has necessary locking and support in place
to make sure we don't miss any of those updates, there is a corner case
where the governor will find that the CPU is already running at the
desired frequency and so may skip an update.
For example, consider that the CPU can run at 1 GHz, 1.2 GHz and 1.4 GHz
and is running at 1 GHz currently. Schedutil tries to update the
frequency to 1.2 GHz, during this time the policy limits get changed as
policy->min = 1.4 GHz. As schedutil (and cpufreq core) does clamp the
frequency at various instances, we will eventually set the frequency to
1.4 GHz, while we will save 1.2 GHz in sg_policy->next_freq.
Now lets say the policy limits get changed back at this time with
policy->min as 1 GHz. The next time schedutil is invoked by the
scheduler, we will reevaluate the next frequency (because
need_freq_update will get set due to limits change event) and lets say
we want to set the frequency to 1.2 GHz again. At this point
sugov_update_next_freq() will find the next_freq == current_freq and
will abort the update, while the CPU actually runs at 1.4 GHz.
Until now need_freq_update was used as a flag to indicate that the
policy's frequency limits have changed, and that we should consider the
new limits while reevaluating the next frequency.
This patch fixes the above mentioned issue by extending the purpose of
the need_freq_update flag. If this flag is set now, the schedutil
governor will not try to abort a frequency change even if next_freq ==
current_freq.
As similar behavior is required in the case of
CPUFREQ_NEED_UPDATE_LIMITS flag as well, need_freq_update will never be
set to false if that flag is set for the driver.
We also don't need to consider the need_freq_update flag in
sugov_update_single() anymore to handle the special case of busy CPU, as
we won't abort a frequency update anymore.
Reported-by: zhuguangqing <zhuguangqing@xiaomi.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Rearrange code to avoid a branch ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The array size is FTRACE_KSTACK_NESTING, so the index FTRACE_KSTACK_NESTING
is illegal too. And fix two typos by the way.
Link: https://lkml.kernel.org/r/20201031085714.2147-1-hqjagain@gmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad53 ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling
memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
If the allocation must fail, no_iotlb_memory is set.
Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.
When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.
Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.
Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.
Fixes: ac2cbab21f ("x86: Don't panic if can not alloc buffer for swiotlb")
Reported-by: Elliott Mitchell <ehem+xen@m5p.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The nesting count of trace_printk allows for 4 levels of nesting. The
nesting counter starts at zero and is incremented before being used to
retrieve the current context's buffer. But the index to the buffer uses the
nesting counter after it was incremented, and not its original number,
which in needs to do.
Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: 3d9622c12c ("tracing: Add barrier to trace_printk() buffer nesting modification")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Prevent undefined behaviour in the timespec64_to_ns() conversion which
is used for converting user supplied time input to nanoseconds. It
lacked overflow protection.
- Mark sched_clock_read_begin/retry() to prevent recursion in the tracer
- Remove unused debug functions in the hrtimer and timerlist code
-----BEGIN PGP SIGNATURE-----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=Gdoq
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few fixes for timers/timekeeping:
- Prevent undefined behaviour in the timespec64_to_ns() conversion
which is used for converting user supplied time input to
nanoseconds. It lacked overflow protection.
- Mark sched_clock_read_begin/retry() to prevent recursion in the
tracer
- Remove unused debug functions in the hrtimer and timerlist code"
* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Prevent undefined behaviour in timespec64_to_ns()
timers: Remove unused inline funtion debug_timer_free()
hrtimer: Remove unused inline function debug_hrtimer_free()
time/sched_clock: Mark sched_clock_read_begin/retry() as notrace
caused by recursion when enabling or disabling a tracer on RISC-V (probably
all architectures which patch through stop machine).
-----BEGIN PGP SIGNATURE-----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=38RZ
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fix from Thomas Gleixner:
"A single fix for stop machine.
Mark functions no trace to prevent a crash caused by recursion when
enabling or disabling a tracer on RISC-V (probably all architectures
which patch through stop machine)"
* tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stop_machine, rcu: Mark functions as notrace
- Fix incorrect failure injection handling on the fuxtex code
- Prevent a preemption warning in lockdep when tracking local_irq_enable()
and interrupts are already enabled
- Remove more raw_cpu_read() usage from lockdep which causes state
corruption on !X86 architectures.
- Make the nr_unused_locks accounting in lockdep correct again.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl+evEUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYod93EADG90GmRBYQxn6y2eQUKE/9f5SMiMFJ
KdvuqNBqHOhYm3iUPbZJcb0P/JZi1NHP0fBFMishdESGi96tD96K7T04WD0gmjtm
ArWFroe8uzEYtY9atlEwM0Nrvq0w8ZBLv9x1adXzJ59vB8/8Uq+wzYioSWn9yMcv
ye3jfVyAlM7ouFHDQAA36s/nhvZfxms4C0t+6S3gjVTIp/6riGuYh5t7dbXUMlnu
nGLiIJFjU+ekurweVDGpqD/nAxYfqf3UxebWnrosf7iu6suwYwaPFZGZ/kxlbr5e
qWx0B1RuhjAoefVJlPTkHmuhd0SnH/Gm/tTNkQ3LidJhPTIhLJlb7zffwyZlc510
VdaUipfZ6bNqDD6/dK6fKJtdKSE4w/z3pT53954NUD5zw/jIcHlgnaQieh72DH+F
1EKqmsNrwHAxYfMndQxLGdIoBScUAFzHzDnzsY9KKS2cfhChljzLa2nDIfMsDfKQ
aROugzEbZPQEb1iWUEOF3XopcuZzZQCaPlLDLvAnsBeYEPm0gdmbKFPFsDjOyBVX
/Qc41O7DyHKcoiLX2zM2c7CxnV5J6YEZz3jQSZLFlpH9Ih7jwAl9/6VirggNUNvV
YVsgM/myhYQtJBqHHojNppZFFW3KdgfxWuY7+qt7Ox5w/ck5qYQwRnoB4FROwVHV
pzcYTBE5qkQnIw==
=S01o
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A couple of locking fixes:
- Fix incorrect failure injection handling in the fuxtex code
- Prevent a preemption warning in lockdep when tracking
local_irq_enable() and interrupts are already enabled
- Remove more raw_cpu_read() usage from lockdep which causes state
corruption on !X86 architectures.
- Make the nr_unused_locks accounting in lockdep correct again"
* tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix nr_unused_locks accounting
locking/lockdep: Remove more raw_cpu_read() usage
futex: Fix incorrect should_fail_futex() handling
lockdep: Fix preemption WARN for spurious IRQ-enable
Hi Linus,
Please, pull the following patches that replace zero-length arrays with
flexible-array members.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=vyu3
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members"
* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
printk: ringbuffer: Replace zero-length array with flexible-array member
net/smc: Replace zero-length array with flexible-array member
net/mlx5: Replace zero-length array with flexible-array member
mei: hw: Replace zero-length array with flexible-array member
gve: Replace zero-length array with flexible-array member
Bluetooth: btintel: Replace zero-length array with flexible-array member
scsi: target: tcmu: Replace zero-length array with flexible-array member
ima: Replace zero-length array with flexible-array member
enetc: Replace zero-length array with flexible-array member
fs: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
params: Replace zero-length array with flexible-array member
tracepoint: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
If a hashtab is accessed in both non-NMI and NMI context, the system may
deadlock on bucket->lock. Fix this issue with percpu counter map_locked.
map_locked rejects concurrent access to the same bucket from the same CPU.
To reduce memory overhead, map_locked is not added per bucket. Instead,
8 percpu counters are added to each hashtab. buckets are assigned to these
counters based on the lower bits of its hash.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-3-songliubraving@fb.com
- Modify Kconfig to prevent configuring either the "conservative"
or the "ondemand" governor as the default cpufreq governor if
intel_pstate is selected, in which case "schedutil" is the
default choice for the default governor setting (Rafael Wysocki).
- Modify the cpufreq core, intel_pstate and the schedutil governor
to avoid missing updates of the HWP max limit when intel_pstate
operates in the passive mode with HWP enabled (Rafael Wysocki).
- Fix max_cstate module parameter handling in intel_idle for
processor models with C-state tables coming from ACPI (Chen Yu).
- Clean up assorted pieces of power management code (Jackie Zamow,
Tom Rix, Zhang Qilong).
-----BEGIN PGP SIGNATURE-----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=w+LI
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues related to running intel_pstate in the passive
mode with HWP enabled, correct the handling of the max_cstate module
parameter in intel_idle and make a few janitorial changes.
Specifics:
- Modify Kconfig to prevent configuring either the "conservative" or
the "ondemand" governor as the default cpufreq governor if
intel_pstate is selected, in which case "schedutil" is the default
choice for the default governor setting (Rafael Wysocki).
- Modify the cpufreq core, intel_pstate and the schedutil governor to
avoid missing updates of the HWP max limit when intel_pstate
operates in the passive mode with HWP enabled (Rafael Wysocki).
- Fix max_cstate module parameter handling in intel_idle for
processor models with C-state tables coming from ACPI (Chen Yu).
- Clean up assorted pieces of power management code (Jackie Zamow,
Tom Rix, Zhang Qilong)"
* tag 'pm-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Always call driver if CPUFREQ_NEED_UPDATE_LIMITS is set
cpufreq: Introduce cpufreq_driver_test_flags()
cpufreq: speedstep: remove unneeded semicolon
PM: sleep: fix typo in kernel/power/process.c
intel_idle: Fix max_cstate for processor models without C-state tables
cpufreq: intel_pstate: Avoid missing HWP max updates in passive mode
cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flag
cpufreq: Avoid configuring old governors as default with intel_pstate
cpufreq: e_powersaver: remove unreachable break
Chris reported that commit 24d5a3bffef1 ("lockdep: Fix
usage_traceoverflow") breaks the nr_unused_locks validation code
triggered by /proc/lockdep_stats.
By fully splitting LOCK_USED and LOCK_USED_READ it becomes a bad
indicator for accounting nr_unused_locks; simplyfy by using any first
bit.
Fixes: 24d5a3bffef1 ("lockdep: Fix usage_traceoverflow")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lkml.kernel.org/r/20201027124834.GL2628@hirez.programming.kicks-ass.net
I initially thought raw_cpu_read() was OK, since if it is !0 we have
IRQs disabled and can't get migrated, so if we get migrated both CPUs
must have 0 and it doesn't matter which 0 we read.
And while that is true; it isn't the whole store, on pretty much all
architectures (except x86) this can result in computing the address for
one CPU, getting migrated, the old CPU continuing execution with another
task (possibly setting recursion) and then the new CPU reading the value
of the old CPU, which is no longer 0.
Similer to:
baffd723e4 ("lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201026152256.GB2651@hirez.programming.kicks-ass.net
Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for
___bpf_prog_run()") introduced a __no_fgcse macro that expands to a
function scope __attribute__((optimize("-fno-gcse"))), to disable a
GCC specific optimization that was causing trouble on x86 builds, and
was not expected to have any positive effect in the first place.
However, as the GCC manual documents, __attribute__((optimize))
is not for production use, and results in all other optimization
options to be forgotten for the function in question. This can
cause all kinds of trouble, but in one particular reported case,
it causes -fno-asynchronous-unwind-tables to be disregarded,
resulting in .eh_frame info to be emitted for the function.
This reverts commit 3193c0836, and instead, it disables the -fgcse
optimization for the entire source file, but only when building for
X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the
original commit states that CONFIG_RETPOLINE=n triggers the issue,
whereas CONFIG_RETPOLINE=y performs better without the optimization,
so it is kept disabled in both cases.
Fixes: 3193c0836f ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
Because sugov_update_next_freq() may skip a frequency update even if
the need_freq_update flag has been set for the policy at hand, policy
limits updates may not take effect as expected.
For example, if the intel_pstate driver operates in the passive mode
with HWP enabled, it needs to update the HWP min and max limits when
the policy min and max limits change, respectively, but that may not
happen if the target frequency does not change along with the limit
at hand. In particular, if the policy min is changed first, causing
the target frequency to be adjusted to it, and the policy max limit
is changed later to the same value, the HWP max limit will not be
updated to follow it as expected, because the target frequency is
still equal to the policy min limit and it will not change until
that limit is updated.
To address this issue, modify get_next_freq() to let the driver
callback run if the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag
is set regardless of whether or not the new frequency to set is
equal to the previous one.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 1c534352f4 cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ...
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: a62f68f5ca cpufreq: Introduce cpufreq_driver_test_flags()
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit e679654a70 ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
\x09(t=21031 jiffies g=2534773 q=179750)
NMI backtrace for cpu 7
CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G W 5.8.0-00004-g68bfc7f8c1b4 #6
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
Call Trace:
<IRQ>
dump_stack+0x57/0x70
nmi_cpu_backtrace.cold+0x14/0x53
? lapic_can_unplug_cpu.cold+0x39/0x39
nmi_trigger_cpumask_backtrace+0xb7/0xc7
rcu_dump_cpu_stacks+0xa2/0xd0
rcu_sched_clock_irq.cold+0x1ff/0x3d9
? tick_nohz_handler+0x100/0x100
update_process_times+0x5b/0x90
tick_sched_timer+0x5e/0xf0
__hrtimer_run_queues+0x12a/0x2a0
hrtimer_interrupt+0x10e/0x280
__sysvec_apic_timer_interrupt+0x51/0xe0
asm_call_on_stack+0xf/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x6f/0x80
...
task_file_seq_next+0x52/0xa0
bpf_seq_read+0xb9/0x320
vfs_read+0x9d/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.
For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.
static unsigned q;
volatile unsigned *p = &q;
volatile unsigned long long ll;
static void bpf_delay(void)
{
int i, j;
for (i = 0; i < 10000; i++)
for (j = 0; j < 10000; j++)
ll += *p;
}
There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().
This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().
For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
69 context-switches
With this patch,
75 context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com
Coredump logics needs to report not only the registers of the dumping
thread, but (since 2.5.43) those of other threads getting killed.
Doing that might require extra state saved on the stack in asm glue at
kernel entry; signal delivery logics does that (we need to be able to
save sigcontext there, at the very least) and so does seccomp.
That covers all callers of do_coredump(). Secondary threads get hit with
SIGKILL and caught as soon as they reach exit_mm(), which normally happens
in signal delivery, so those are also fine most of the time. Unfortunately,
it is possible to end up with secondary zapped when it has already entered
exit(2) (or, worse yet, is oopsing). In those cases we reach exit_mm()
when mm->core_state is already set, but the stack contents is not what
we would have in signal delivery.
At least on two architectures (alpha and m68k) it leads to infoleaks - we
end up with a chunk of kernel stack written into coredump, with the contents
consisting of normal C stack frames of the call chain leading to exit_mm()
instead of the expected copy of userland registers. In case of alpha we
leak 312 bytes of stack. Other architectures (including the regset-using
ones) might have similar problems - the normal user of regsets is ptrace
and the state of tracee at the time of such calls is special in the same
way signal delivery is.
Note that had the zapper gotten to the exiting thread slightly later,
it wouldn't have been included into coredump anyway - we skip the threads
that have already cleared their ->mm. So let's pretend that zapper always
loses the race. IOW, have exit_mm() only insert into the dumper list if
we'd gotten there from handling a fatal signal[*]
As the result, the callers of do_exit() that have *not* gone through get_signal()
are not seen by coredump logics as secondary threads. Which excludes voluntary
exit()/oopsen/traps/etc. The dumper thread itself is unaffected by that,
so seccomp is fine.
[*] originally I intended to add a new flag in tsk->flags, but ebiederman pointed
out that PF_SIGNALED is already doing just what we need.
Cc: stable@vger.kernel.org
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New synthetic event code used strcat() and miscalculated the ending, causing
the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which has
all the mechanisms in place to protect against writing more than what is
allocated, and cleans up the code a bit.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX5lZkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qu8+AQDfg1UM12HUIs1XRhbXBxf9g3kjwrJh
nuoMilEZZstSCgD8DDQiPckOS9NfrdkyCPQ86tIKoOsGPowoA21sNOHPvQQ=
=+V+S
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix synthetic event "strcat" overrun
New synthetic event code used strcat() and miscalculated the ending,
causing the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which
has all the mechanisms in place to protect against writing more than
what is allocated, and cleans up the code a bit"
* tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, synthetic events: Replace buggy strcat() with seq_buf operations
If should_futex_fail() returns true in futex_wake_pi(), then the 'ret'
variable is set to -EFAULT and then immediately overwritten. So the failure
injection is non-functional.
Fix it by actually leaving the function and returning -EFAULT.
The Fixes tag is kinda blury because the initial commit which introduced
failure injection was already sloppy, but the below mentioned commit broke
it completely.
[ tglx: Massaged changelog ]
Fixes: 6b4f4bc9cb ("locking/futex: Allow low-level atomic operations to return -EAGAIN")
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200927000858.24219-1-mateusznosek0@gmail.com
Fix a typo in a comment in freeze_processes().
Signed-off-by: Jackie Zamow <jackie.zamow@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a memory corruption bug happening while running the synthetic
event selftests:
kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing)
CPU: 5 PID: 6866 Comm: ftracetest Tainted: G W 5.9.0-rc5-test+ #577
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
dump_stack+0x8d/0xc0
create_object.cold+0x3b/0x60
slab_post_alloc_hook+0x57/0x510
? tracing_map_init+0x178/0x340
__kmalloc+0x1b1/0x390
tracing_map_init+0x178/0x340
event_hist_trigger_func+0x523/0xa40
trigger_process_regex+0xc5/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fef0a63a487
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487
RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001
RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038
R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039
R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff8c196fa2afe0 (size 8):
kmemleak: comm "ftracetest", pid 6866, jiffies 4295082531
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
__kmalloc+0x1b1/0x390
tracing_map_init+0x1be/0x340
event_hist_trigger_func+0x523/0xa40
trigger_process_regex+0xc5/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The cause came down to a use of strcat() that was adding an string that was
shorten, but the strcat() did not take that into account.
strcat() is extremely dangerous as it does not care how big the buffer is.
Replace it with seq_buf operations that prevent the buffer from being
overwritten if what is being written is bigger than the buffer.
Fixes: 10819e2579 ("tracing: Handle synthetic event array field type checking correctly")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some architectures assume that the stopped CPUs don't make function calls
to traceable functions when they are in the stopped state. See also commit
cb9d7fd51d ("watchdog: Mark watchdog touch functions as notrace").
Violating this assumption causes kernel crashes when switching tracer on
RISC-V.
Mark rcu_momentary_dyntick_idle() and stop_machine_yield() notrace to
prevent this.
Fixes: 4ecf0a43e7 ("processor: get rid of cpu_relax_yield")
Fixes: 366237e7b0 ("stop_machine: Provide RCU quiescent state in multi_cpu_stop()")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201021073839.43935-1-zong.li@sifive.com
UBSAN reports:
Undefined behaviour in ./include/linux/time64.h:127:27
signed integer overflow:
17179869187 * 1000000000 cannot be represented in type 'long long int'
Call Trace:
timespec64_to_ns include/linux/time64.h:127 [inline]
set_cpu_itimer+0x65c/0x880 kernel/time/itimer.c:180
do_setitimer+0x8e/0x740 kernel/time/itimer.c:245
__x64_sys_setitimer+0x14c/0x2c0 kernel/time/itimer.c:336
do_syscall_64+0xa1/0x540 arch/x86/entry/common.c:295
Commit bd40a17576 ("y2038: itimer: change implementation to timespec64")
replaced the original conversion which handled time clamping correctly with
timespec64_to_ns() which has no overflow protection.
Fix it in timespec64_to_ns() as this is not necessarily limited to the
usage in itimers.
[ tglx: Added comment and adjusted the fixes tag ]
Fixes: 361a3bf005 ("time64: Add time64.h header and define struct timespec64")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1598952616-6416-1-git-send-email-prime.zeng@hisilicon.com
Since sched_clock_read_begin() and sched_clock_read_retry() are called
by notrace function sched_clock(), they shouldn't be traceable either,
or else ftrace_graph_caller will run into a dead loop on the path
as below (arm for instance):
ftrace_graph_caller()
prepare_ftrace_return()
function_graph_enter()
ftrace_push_return_trace()
trace_clock_local()
sched_clock()
sched_clock_read_begin/retry()
Fixes: 1b86abc1c6 ("sched_clock: Expose struct clock_read_data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200929082027.16787-1-quanyang.wang@windriver.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
which are based on CLOCK_MONOTONIC require time namespace corrected. This
was missed in the original time namesapce support.
-----BEGIN PGP SIGNATURE-----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=VFCv
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array.
-----BEGIN PGP SIGNATURE-----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=RNOk
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
-----BEGIN PGP SIGNATURE-----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=/anB
-----END PGP SIGNATURE-----
Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linux
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
This is the cleanup of the latest series of prandom_u32 experimentations
consisting in using SipHash instead of Tausworthe to produce the randoms
used by the network stack. The changes to the files were kept minimal,
and the controversial commit that used to take noise from the fast_pool
(f227e3ec3b) was reverted. Instead, a dedicated "net_rand_noise" per_cpu
variable is fed from various sources of activities (networking, scheduling)
to perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to make
any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64 than
what is was with the controversial commit above, though this remains barely
above measurement noise. It was also tested on i386 and arm, and build-
tested only on arm64.
The whole discussion around this is archived here:
https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
-----BEGIN PGP SIGNATURE-----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=KHhI
-----END PGP SIGNATURE-----
Merge tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
- document the new document dma_{alloc,free}_pages API
- two fixups for the dma-mapping.h split
-----BEGIN PGP SIGNATURE-----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=0N7Y
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- document the new dma_{alloc,free}_pages() API
- two fixups for the dma-mapping.h split
* tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: document dma_{alloc,free}_pages
dma-mapping: move more functions to dma-map-ops.h
ARM/sa1111: add a missing include of dma-map-ops.h
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
The success return value of ring_buffer_resize() is stated to be zero,
and checked that way. But it is incorrectly returning the size allocated.
Also, a fix to a comment.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX5LnlRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtPxAP439tmV1wWK4uBF6TLBahaPdj0tGe5b
NT/ASnYjokZKWgEA//vmUBMMmNBohcd8DkkTu8Pp3tkc2b4RLR5WJIpXGwk=
=1Og+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing ring-buffer fix from Steven Rostedt:
"The success return value of ring_buffer_resize() is stated to be
zero and checked that way.
But it was incorrectly returning the size allocated.
Also, a fix to a comment"
* tag 'trace-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Update the description for ring_buffer_wait
ring-buffer: Return 0 on success from ring_buffer_resize()
- Move the AVS drivers to new platform-specific locations and get
rid of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra).
-----BEGIN PGP SIGNATURE-----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=TFKg
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late
in the 5.9 cycle started depending on a return code from
a function which changed with the 5.10 PR from the usb subsystem
Current release - regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous releases - regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu()
to synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems;
the property is not populated correctly by the firmware,
but firmware configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is
light and only wants to schedule napi (and do so through
a _irqoff() variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ceke
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cb ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is valid (albeit uncommon) to call local_irq_enable() without first
having called local_irq_disable(). In this case we enter
lockdep_hardirqs_on*() with IRQs enabled and trip a preemption warning
for using __this_cpu_read().
Use this_cpu_read() instead to avoid the warning.
Fixes: 4d004099a6 ("lockdep: Fix lockdep recursion")
Reported-by: syzbot+53f8ce8bbc07924b6417@syzkaller.appspotmail.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
This change removes all instances of DISABLE_LTO from
Makefiles, as they are currently unused, and the preferred
method of disabling LTO is to filter out the flags instead.
Note added by Masahiro Yamada:
DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was
not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272)
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For all commands except FUTEX_WAIT, the timeout is interpreted as an
absolute value. This absolute value is inside the task's time namespace and
has to be converted to the host's time.
Fixes: 5a590f35ad ("posix-clocks: Wire up clock_gettime() with timens offsets")
Reported-by: Hans van der Laan <j.h.vanderlaan@student.utwente.nl>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201015160020.293748-1-avagin@gmail.com
Due to a mismerge a bunch of prototypes that should have moved to
dma-map-ops.h are still in dma-mapping.h, fix that up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The commit af7ec13833 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
introduces RET_PTR_TO_BTF_ID_OR_NULL and
the commit eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
introduces RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL.
Note that for RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL, the reg0->type
could become PTR_TO_MEM_OR_NULL which is not covered by
BPF_PROBE_MEM.
The BPF_REG_0 will then hold a _OR_NULL pointer type. This _OR_NULL
pointer type requires the bpf program to explicitly do a NULL check first.
After NULL check, the verifier will mark all registers having
the same reg->id as safe to use. However, the reg->id
is not set for those new _OR_NULL return types. One of the ways
that may be wrong is, checking NULL for one btf_id typed pointer will
end up validating all other btf_id typed pointers because
all of them have id == 0. The later tests will exercise
this path.
To fix it and also avoid similar issue in the future, this patch
moves the id generation logic out of each individual RET type
test in check_helper_call(). Instead, it does one
reg_type_may_be_null() test and then do the id generation
if needed.
This patch also adds a WARN_ON_ONCE in mark_ptr_or_null_reg()
to catch future breakage.
The _OR_NULL pointer usage in the bpf_iter_reg.ctx_arg_info is
fine because it just happens that the existing id generation after
check_ctx_access() has covered it. It is also using the
reg_type_may_be_null() to decide if id generation is needed or not.
Fixes: af7ec13833 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
Fixes: eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201019194212.1050855-1-kafai@fb.com
A break is not needed if it is preceded by a return.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201019173846.1021-1-trix@redhat.com
We have the raw cached freq to reduce the chance in calling cpufreq
driver where it could be costly in some arch/SoC.
Currently, the raw cached freq is reset in sugov_update_single() when
it avoids frequency reduction (which is not desirable sometimes), but
it is better to restore the previous value of it in that case,
because it may not change in the next cycle and it is not necessary
to change the CPU frequency then.
Adapted from https://android-review.googlesource.com/1352810/
Signed-off-by: Wei Wang <wvw@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edit and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
