Add documentation for the built-in switch which can be found in the
MediaTek MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver for the built-in Gigabit Ethernet switch which can be found
in the MediaTek MT7988 SoC.
The switch shares most of its design with MT7530 and MT7531, but has
it's registers mapped into the SoCs register space rather than being
connected externally or internally via MDIO.
Introduce a new platform driver to support that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As MT7530 and MT7531 internally use 32-bit wide registers, each access
to any register of the switch requires several operations on the MDIO
bus. Hence if there is congruent access, e.g. due to PCS or PHY
polling, this can mess up and interfere with another ongoing register
access sequence.
However, the MDIO bus mutex is only relevant for MDIO-connected
switches. Prepare switches which have there registers directly mapped
into the SoCs register space via MMIO which do not require such
locking. There we can simply use regmap's default locking mechanism.
Hence guard mutex operations to only be performed in case of MDIO
connected switches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split MT7530 switch driver into a common part and a part specific
for MDIO connected switches and multi-chip modules.
Move MDIO-specific functions to newly introduced mt7530-mdio.c while
keeping the common parts in mt7530.c.
Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
implied by CONFIG_NET_DSA_MT7530.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
MT7988 shares a significant part of the setup function with MT7531.
Split-off those parts into a shared function which is going to be used
also by mt7988_setup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used parts from mt7530_remove into new
mt7530_remove_common helper function which will be used by both,
mt7530_remove and the to-be-introduced mt7988_remove.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used parts from mt7530_probe into new mt7530_probe_common
helper function which will be used by both, mt7530_probe and the
to-be-introduced mt7988_probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of splitting mt7530.c into a driver for MDIO-connected
as well as MDIO-accessed built-in switches on one hand and MMIO-accessed
built-in switches move the p5_inft_modes() function from mt7530.h to
mt7530.c. The function is only needed there and will trigger a compiler
warning about a defined but unused function otherwise when including
mt7530.h in the to-be-introduced bus-specific drivers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the MDIO bus lock only needs to be involved if actually operating
on an MDIO-connected switch we will need to skip locking for built-in
switches which are accessed via MMIO.
Create helper functions which simplify that upcoming change.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move creating the SGMII PCS from mt753x_setup() to the more appropriate
mt7530_probe() function.
This is done also in preparation of moving all functions related to
MDIO-connected MT753x switches to a separate module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use regmap API to access the switch register space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of wrapping the locked register accessor functions, use the
unlocked variants and add locking wrapper functions to let regmap
handle the locking.
This is a preparation towards being able to always use regmap to
access switch registers instead of open-coded accessor functions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of macro templates use a dedidated function and allocated
regmap_config when creating the regmaps for the pcs-mtk-lynxi
instances.
This is in preparation to switching to use unlocked regmap accessors
and have regmap's locking API handle locking for us.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simply returning the negative error value instead of the read value
doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1)
so this kind of error will not go unnoticed.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: smsc: add support for edpd tunable
This adds support for the EDPD PHY tunable.
Per default EDPD is disabled in interrupt mode, the tunable can be used
to override this, e.g. if the link partner doesn't use EDPD.
The interval to check for energy can be chosen between 1000ms and
2000ms. Note that this value consists of the 1000ms phylib interval
for state machine runs plus the time to wait for energy being detected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable EDPD PHY tunable support for all drivers using
lan87xx_read_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the EDPD PHY tunable.
Per default EDPD is disabled in interrupt mode, the tunable can be used
to override this, e.g. if the link partner doesn't use EDPD.
The interval to check for energy can be chosen between 1000ms and
2000ms. Note that this value consists of the 1000ms phylib interval
for state machine runs plus the time to wait for energy being detected.
v2:
- consider that phylib core holds phydev->lock when calling the
phy tunable hooks
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a member edpd_max_wait_ms to the private data structure in preparation
of making the wait period configurable by supporting the edpd phy tunable.
v2:
- rename constant to EDPD_MAX_WAIT_DFLT_MS
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flag edpd_mode_set_by_user in preparation of adding edpd phy tunable
support. This flag will allow users to override the default behavior
of edpd being disabled if interrupt mode is used.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clear edpd_enable if interupt mode is used, this avoids
having to check for PHY_POLL multiple times.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add helper smsc_phy_config_edpd() and explicitly clear bit
MII_LAN83C185_EDPWRDOWN is edpd_enable isn't set.
Boot loader may have left whatever value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the flag to edpd_enable, as we're not enabling energy but
edpd (energy detect power down) mode. In addition change the
type to a bit field member in preparation of adding further flags.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
net: Convert dsa_master_ioctl() to netdev notifier
This is preparatory work in order for Maxim Georgiev to be able to start
the API conversion process of hardware timestamping from ndo_eth_ioctl()
to ndo_hwtstamp_set():
https://lore.kernel.org/netdev/20230331045619.40256-1-glipus@gmail.com/
In turn, Maxim Georgiev's work is a preparation so that Köry Maincent is
able to make the active hardware timestamping layer selectable by user
space.
https://lore.kernel.org/netdev/20230308135936.761794-1-kory.maincent@bootlin.com/
So, quite some dependency chain.
Before this patch set, DSA prevented the conversion of any networking
driver from the ndo_eth_ioctl() API to the ndo_hwtstamp_set() API,
because it wanted to validate the hwtstamping settings on the DSA
master, and it was only coded up to do this using the old API.
After this patch set, a new netdev notifier exists, which does not
depend on anything that would constitute the "soon-to-be-legacy" API,
but rather, it uses a newly introduced struct kernel_hwtstamp_config,
and it doesn't issue any ioctl at all, being thus compatible both with
ndo_eth_ioctl(), and with the not-yet-introduced, but now possible,
ndo_hwtstamp_set().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that PTP 2-step TX timestamping is broken on DSA switches if
the master also timestamps the same packets is documented by commit
f685e609a3 ("net: dsa: Deny PTP on master if switch supports it").
We attempt to help the users avoid shooting themselves in the foot by
making DSA reject the timestamping ioctls on an interface that is a DSA
master, and the switch tree beneath it contains switches which are aware
of PTP.
The only problem is that there isn't an established way of intercepting
ndo_eth_ioctl calls, so DSA creates avoidable burden upon the network
stack by creating a struct dsa_netdevice_ops with overlaid function
pointers that are manually checked from the relevant call sites. There
used to be 2 such dsa_netdevice_ops, but now, ndo_eth_ioctl is the only
one left.
There is an ongoing effort to migrate driver-visible hardware timestamping
control from the ndo_eth_ioctl() based API to a new ndo_hwtstamp_set()
model, but DSA actively prevents that migration, since dsa_master_ioctl()
is currently coded to manually call the master's legacy ndo_eth_ioctl(),
and so, whenever a network device driver would be converted to the new
API, DSA's restrictions would be circumvented, because any device could
be used as a DSA master.
The established way for unrelated modules to react on a net device event
is via netdevice notifiers. So we create a new notifier which gets
called whenever there is an attempt to change hardware timestamping
settings on a device.
Finally, there is another reason why a netdev notifier will be a good
idea, besides strictly DSA, and this has to do with PHY timestamping.
With ndo_eth_ioctl(), all MAC drivers must manually call
phy_has_hwtstamp() before deciding whether to act upon SIOCSHWTSTAMP,
otherwise they must pass this ioctl to the PHY driver via
phy_mii_ioctl().
With the new ndo_hwtstamp_set() API, it will be desirable to simply not
make any calls into the MAC device driver when timestamping should be
performed at the PHY level.
But there exist drivers, such as the lan966x switch, which need to
install packet traps for PTP regardless of whether they are the layer
that provides the hardware timestamps, or the PHY is. That would be
impossible to support with the new API.
The proposal there, too, is to introduce a netdev notifier which acts as
a better cue for switching drivers to add or remove PTP packet traps,
than ndo_hwtstamp_set(). The one introduced here "almost" works there as
well, except for the fact that packet traps should only be installed if
the PHY driver succeeded to enable hardware timestamping, whereas here,
we need to deny hardware timestamping on the DSA master before it
actually gets enabled. This is why this notifier is called "PRE_", and
the notifier that would get used for PHY timestamping and packet traps
would be called NETDEV_CHANGE_HWTSTAMP. This isn't a new concept, for
example NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER do the same thing.
In expectation of future netlink UAPI, we also pass a non-NULL extack
pointer to the netdev notifier, and we make DSA populate it with an
informative reason for the rejection. To avoid making it go to waste, we
make the ioctl-based dev_set_hwtstamp() create a fake extack and print
the message to the kernel log.
Link: https://lore.kernel.org/netdev/20230401191215.tvveoi3lkawgg6g4@skbuf/
Link: https://lore.kernel.org/netdev/20230310164451.ls7bbs6pdzs4m6pw@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa_master_ioctl() is in the process of getting converted to a different
API, where we won't have access to a struct ifreq * anymore, but rather,
to a struct kernel_hwtstamp_config.
Since ds->ops->port_hwtstamp_get() still uses struct ifreq *, this
creates a difficult situation where we have to make up such a dummy
pointer.
The conversion is a bit messy, because it forces a "good" implementation
of ds->ops->port_hwtstamp_get() to return -EFAULT in copy_to_user()
because of the NULL ifr->ifr_data pointer. However, it works, and it is
only a transient step until ds->ops->port_hwtstamp_get() gets converted
to the new API which passes struct kernel_hwtstamp_config and does not
call copy_to_user().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski suggested that we may want to add new UAPI for
controlling hardware timestamping through netlink in the future, and in
that case, we will be limited to the struct hwtstamp_config that is
currently passed in fixed binary format through the SIOCGHWTSTAMP and
SIOCSHWTSTAMP ioctls. It would be good if new kernel code already
started operating on an extensible kernel variant of that structure,
similar in concept to struct kernel_ethtool_coalesce vs struct
ethtool_coalesce.
Since struct hwtstamp_config is in include/uapi/linux/net_tstamp.h, here
we introduce include/linux/net_tstamp.h which shadows that other header,
but also includes it, so that existing includers of this header work as
before. In addition to that, we add the definition for the kernel-only
structure, and a helper which translates all fields by manual copying.
I am doing a manual copy in order to not force the alignment (or type)
of the fields of struct kernel_hwtstamp_config to be the same as of
struct hwtstamp_config, even though now, they are the same.
Link: https://lore.kernel.org/netdev/20230330223519.36ce7d23@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will want to start using the more meaningful struct
hwtstamp_config pointer in more places, so move the copy_from_user() at
the beginning of dev_set_hwtstamp() in order to get to that, and pass
this argument to net_hwtstamp_validate().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA does not want to intercept all ioctls handled by dev_eth_ioctl(),
only SIOCSHWTSTAMP. This can be seen from commit f685e609a3 ("net:
dsa: Deny PTP on master if switch supports it"). However, the way in
which the dsa_ndo_eth_ioctl() is called would suggest otherwise.
Split the handling of SIOCSHWTSTAMP and SIOCGHWTSTAMP ioctls into
separate case statements of dev_ifsioc(), and make each one call its own
sub-function. This also removes the dsa_ndo_eth_ioctl() call from
dev_eth_ioctl(), which from now on exclusively handles PHY ioctls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the expression "x == 0 || x != -95", the term "x == 0" does not
change the expression's logical value, because 0 != -95, and so,
if x is 0, the expression would still be true by virtue of the second
term. If x is non-zero, the expression depends on the truth value of
the second term anyway. As such, the first term is redundant and can
be deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "switch (cmd)" block from dev_ifsioc() gained a bit too much
unnecessary manual handling of "cmd" in the "default" case, starting
with the private ioctls.
Clean that up by using the "ellipsis" gcc extension, adding separate
cases for the rest of the ioctls, and letting the default case only
return -EINVAL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60
Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: bb6287cb18 ("drm/i915: Track context current active time")
Cc: <stable@vger.kernel.org> # v5.19+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com
[tursulin: Fix spelling in commit msg.]
(cherry picked from commit b3e7005187)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: f89823c212 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com
[tursulin: Manually added stable tag.]
(cherry picked from commit 49f6f6483b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For obvious reasons, we use compressed bpp instead of pipe bpp for
DSC DP SST case. Lets be consistent and use compressed bpp instead of
pipe bpp, also in DP MST DSC case.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Fixes: d51f25eb47 ("drm/i915: Add DSC support to MST path")
Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com
(cherry picked from commit ea1deabc6f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the rare case where we do a full GT reset after starting the HuC
load and before it completes (which basically boils down to i915 hanging
during init), we need to cancel the delayed load fence, as it will be
re-initialized in the post-reset recovery.
Fixes: 27536e0327 ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313205556.1174503-1-daniele.ceraolospurio@intel.com
(cherry picked from commit cdf7911f7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Sparse complains with:
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse:
expected restricted vm_fault_t [assigned] [usertype] ret
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int
Fixes: 516198d317 ("drm/i915: audit bo->resource usage v3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit fde789e833)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
First ASO WQE causes to cache miss in hardware, which can't return
result immediately. It causes to the situation where such WQE is polled
earlier than it is needed. Add logic to retry ASO CQ polling operation.
Link: https://lore.kernel.org/r/eb92a758c533ff3f058e0dcb4f8d2324355304ad.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The CX7 cards which support IPsec packet offload use 32 bits to
configure soft and hard packet limits. This is not enough as the
software part using 64 bits.
The needed functionality of supporting 64 bits is implemented through
mlx5 abstraction layer, which will ensure that HW is reconfigured
on-demand every 2^31 packets.
To simulate the 64 bit IPsec soft/hard limits, we divide the soft/hard
limits to multiple interrupts (rounds). Each round counts 2^31 packets.
Once the counter is less than or equal to 2^31, the soft event is raised
and software sets the bit 31 of the counter and decrement the round
counter.
Link: https://lore.kernel.org/r/5a86c890b6dccb6865acf9042a8b03f899d1f3f9.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Hardware triggers limit events when the packets arrive and are processed
through the device. In case zero was configured as a limit, the HW won't
be able to arm event as it happens at the end of execution pipeline.
Let's prevent such configuration.
Link: https://lore.kernel.org/r/80d0ba33e21fb28b1b91d306d1da39df3d990b68.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The ASO update is common operation which is going to be used in next
patch, so as a preparation, let's refactor the code for future reuse.
As part of this refactoring, not used function argument was removed too.
Link: https://lore.kernel.org/r/d04770b959822fed51c22c13e798f04d760a682e.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Make sure all bo->base.pages entries are either NULL or pointing to a
valid page before calling drm_gem_shmem_put_pages().
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: <stable@vger.kernel.org>
Fixes: 187d292920 ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521093811.1018992-1-boris.brezillon@collabora.com
-----BEGIN PGP SIGNATURE-----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=v7ZW
-----END PGP SIGNATURE-----
Merge tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- scan block devices in non-exclusive mode to avoid temporary mkfs
failures
- fix race between quota disable and quota assign ioctls
- fix deadlock when aborting transaction during relocation with scrub
- ignore fiemap path cache when there are multiple paths for a node
* tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ignore fiemap path cache when there are multiple paths for a node
btrfs: fix deadlock when aborting transaction during relocation with scrub
btrfs: scan device in non-exclusive mode
btrfs: fix race between quota disable and quota assign ioctls
This reverts commit a837e5161c, which broke probing of the venus
driver, at least on the SC7180 SoC HP X2 Chromebook:
qcom-venus aa00000.video-codec: Adding to iommu group 11
qcom-venus aa00000.video-codec: non legacy binding
qcom-venus aa00000.video-codec: failed to reset venus core
qcom-venus: probe of aa00000.video-codec failed with error -110
Matthias Kaehlcke also reported that the same change caused a regression
in SC7180 and sc7280, that prevents AOSS from entering sleep mode during
system suspend. So let's revert this commit for now to fix both issues.
Fixes: a837e5161c ("venus: firmware: Correct non-pix start and end addresses")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are 3 small changes for 6.3-rc5 semi-related to driver core stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZCmVyg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylq2ACgl6+JkJU4g8mZb1wUel8w8n9u8J8AmQE+DhVz
ER9zOe+7njI+ZAsyUVZl
=d5f4
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small changes for 6.3-rc5 semi-related to driver core
stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems"
* tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
cacheinfo: Fix LLC is not exported through sysfs
Documentation/security-bugs: move from admin-guide/ to process/
mtd: spi-nor: fix memory leak when using debugfs_lookup()
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y).
- Fix oops when a PF_IO_WORKER thread tries to core dump.
- Don't try to reconfigure VAS when it's disabled.
Thanks to: Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=1Sli
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)
- Fix oops when a PF_IO_WORKER thread tries to core dump
- Don't try to reconfigure VAS when it's disabled
Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.
* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc/64s: Fix __pte_needs_flush() false positive warning
This patch fixes a corner case where the asoc out stream count may change
after wait_for_sndbuf.
When the main thread in the client starts a connection, if its out stream
count is set to N while the in stream count in the server is set to N - 2,
another thread in the client keeps sending the msgs with stream number
N - 1, and waits for sndbuf before processing INIT_ACK.
However, after processing INIT_ACK, the out stream count in the client is
shrunk to N - 2, the same to the in stream count in the server. The crash
occurs when the thread waiting for sndbuf is awake and sends the msg in a
non-existing stream(N - 1), the call trace is as below:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
Call Trace:
<TASK>
sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline]
sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170
sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163
sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868
sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026
inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
The fix is to add an unlikely check for the send stream number after the
thread wakes up from the wait_for_sndbuf.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang with W=1 reports
drivers/net/ethernet/alteon/acenic.c:2438:10: error: variable
'len' set but not used [-Werror,-Wunused-but-set-variable]
int i, len = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
mlxsw: Use static trip points for transceiver modules
Ido Schimmel writes:
See patch #1 for motivation and implementation details.
Patches #2-#3 are simple cleanups as a result of the changes in the
first patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The get_temp() callback of a thermal zone associated with a transceiver
module no longer needs to read the temperature thresholds of the module.
Therefore, simplify the callback by only reading the temperature.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
