Commit graph

4338 commits

Author SHA1 Message Date
Chaitanya T K dcae9e0203 mac80211: document sleep requirements for channel context ops
Channel context driver operations can sleep, so add might_sleep()
and document this.

Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 11:15:48 +01:00
Johannes Berg ef95d8ba38 mac80211: further improve "no supported rates" warning
Allow distinguishing the non-station case from the case of a
station without rates, by using -1 for the non-station case.
This value cannot be reached with a station since that many
legacy rates don't exist.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:56:42 +01:00
Johannes Berg 2ed77ea692 mac80211: treat bad WMM parameters more gracefully
As WMM is required for HT/VHT operation, treat bad WMM parameters
more gracefully by falling back to default parameters instead of
not using WMM assocation. This makes it possible to still use HT
or VHT, although potentially with reduced quality of service due
to unintended WMM parameters.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:56:26 +01:00
Emmanuel Grumbach 730a755017 mac80211: fixup AIFSN instead of disabling WMM
Disabling WMM has a huge impact these days. It implies that
HT and VHT will be disabled which means that the throughput
will be drammatically reduced.
Since the AIFSN is a transmission parameter, we can play a
bit and fix it up to make it compliant with the 802.11
specification which requires it to be at least 2.
Increasing it from 1 to 2 will slightly reduce the
likelyhood to get a transmission opportunity compared to
other clients that would accept to set AIFSN=1, but at
least it will allow HT and VHT which is a huge gain.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:56:13 +01:00
Johannes Berg cec6628350 mac80211: make enable_qos parameter to ieee80211_set_wmm_default()
The function currently determines this value, for use in bss_info.qos,
based on the interface type itself. Make it a parameter instead and
set it with the same logic for now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:55:55 +01:00
Matthias Schiffer 520c75dcae mac80211: fix crash on mesh local link ID generation with VIFs
llid_in_use needs to be limited to stations of the same VIF, otherwise it
will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
sta->mesh set.

Steps to reproduce:

   modprobe mac80211_hwsim channels=2
   iw phy phy0 interface add ibss0 type ibss
   iw phy phy0 interface add mesh0 type mp
   iw phy phy1 interface add ibss1 type ibss
   iw phy phy1 interface add mesh1 type mp
   ip link set ibss0 up
   ip link set mesh0 up
   ip link set ibss1 up
   ip link set mesh1 up
   iw dev ibss0 ibss join foo 2412
   iw dev ibss1 ibss join foo 2412
   # Ensure that ibss0 and ibss1 are actually associated; I often need to
   # leave and join the cell on ibss1 a second time.
   iw dev mesh0 mesh join bar
   iw dev mesh1 mesh join bar # crash

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:43:40 +01:00
Arik Nemtsov 57f255f581 mac80211: TDLS: add proper HT-oper IE
When 11n peers performs a TDLS connection on a legacy BSS, the HT
operation IE must be specified according to IEEE802.11-2012 section
9.23.3.2. Otherwise HT-protection is compromised and the medium becomes
noisy for both the TDLS and the BSS links.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:42:47 +01:00
Eliad Peller 0d440ea294 mac80211: don't reconfigure sched scan in case of wowlan
Scheduled scan has to be reconfigured only if wowlan wasn't
configured, since otherwise it should continue to run (with
the 'any' trigger) or be aborted.

The current code will end up asking the driver to start a new
scheduled scan without stopping the previous one, and leaking
some memory (from the previous request.)

Fix this by doing the abort/restart under the proper conditions.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:42:05 +01:00
Eliad Peller 968a76cef3 mac80211: call drv_stop only if driver is started
If drv_start() fails during hw_restart, all the running
interfaces are being closed/stopped, which results in
drv_stop() being called, although the driver was never
started successfully.

This might cause drivers to perform operations on uninitialized
memory (as they assume it was initialized on drv_start)

Consider the local->started flag, and call the driver's stop()
op only if drv_start() succeeded before.

Move drv_start() and drv_stop() to driver-ops.c, as they are no
longer simple wrappers.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:41:12 +01:00
Andrei Otcheretianski c189a685b8 mac80211: Remove WARN_ON_ONCE in ieee80211_recalc_smps
The recalc_smps work can run after the station disassociates.
At this stage we already released the channel, but the work
will be cancelled only when the interface stops.
In this scenario we can hit the warning in ieee80211_recalc_smps, so
just remove it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:41:02 +01:00
Eliad Peller 43d6df007c mac80211: use freezable workqueue for restart work
Requesting hw restart during suspend might result
in the restart work being executed after mac80211
and the hw are suspended.

Solve the race by simply scheduling the restart
work on a freezable workqueue.

Note that there can be some cases of reconfiguration
on resume (besides the hardware restart):

* wowlan is not configured -
    All the interfaces removed were removed on suspend,
    and drv_stop() was called. At this point the driver
    shouldn't expect for hw_restart anyway, so we can
    simply cancel it (on resume).

* wowlan is configured, drv_resume() == 1
    There is no definitive expected behavior in this case,
    as each driver might have different expectations (e.g.
    setting some flags on suspend/restart vs. not handling
    spurious recovery).
    For now, simply let the hw_restart work run again after
    resume, and hope the driver will handle it well (or at
    least initiate another hw restart).

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:41:01 +01:00
Andrei Otcheretianski a64cba3c53 mac80211: Fix local deauth while associating
Local request to deauthenticate wasn't handled while associating, thus
the association could continue even when the user space required to
disconnect.

Cc: stable@vger.kernel.org
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:41:00 +01:00
Arik Nemtsov 254d3dfe44 mac80211: allow null chandef in tracing
In TDLS channel-switch operations the chandef can sometimes be NULL.
Avoid an oops in the trace code for these cases and just print a
chandef full of zeros.

Cc: stable@vger.kernel.org
Fixes: a7a6bdd067 ("mac80211: introduce TDLS channel switch ops")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:40:59 +01:00
Janusz.Dziedzic@tieto.com 519ee6918b mac80211: fix divide by zero when NOA update
In case of one shot NOA the interval can be 0, catch that
instead of potentially (depending on the driver) crashing
like this:

divide error: 0000 [#1] SMP
[...]
Call Trace:
<IRQ>
[<ffffffffc08e891c>] ieee80211_extend_absent_time+0x6c/0xb0 [mac80211]
[<ffffffffc08e8a17>] ieee80211_update_p2p_noa+0xb7/0xe0 [mac80211]
[<ffffffffc069cc30>] ath9k_p2p_ps_timer+0x170/0x190 [ath9k]
[<ffffffffc070adf8>] ath_gen_timer_isr+0xc8/0xf0 [ath9k_hw]
[<ffffffffc0691156>] ath9k_tasklet+0x296/0x2f0 [ath9k]
[<ffffffff8107ad65>] tasklet_action+0xe5/0xf0
[...]

Cc: stable@vger.kernel.org [3.16+, due to d463af4a1c using it]
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-03 10:40:57 +01:00
David S. Miller e9829b9745 Here's another set of patches for the current cycle:
* I merged net-next back to avoid a conflict with the
  * cfg80211 scheduled scan API extensions
  * preparations for better scan result timestamping
  * regulatory cleanups
  * mac80211 statistics cleanups
  * a few other small cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJWJ6lbAAoJEDBSmw7B7bqraasP/Ryaa7zL10E+dOQtqBQHQeMe
 olbrCUtTYltr4nnuESzh5WPeIVZBQ0DIduoLLF0IDSPVwE/NrbpFUVIMHvJvr+s7
 rE9k8RB4P7BMTjf+mkDX1Od9kCKGkt4ezcyt/oNIsqM12SN9JQ99itwz6Mp94xCs
 XKsiXJRh9f/8Qwd/74qQq1Va3UfGAVuKO8WpUe/A7TYTla8ZY20pv1D8kQKQzrFg
 DwsMirjmHcUpobSjnPAAmZevRxdk6o0E+P7DYG172H2Tm8/EIMR/gYMnQeYW6HkA
 lfMMDfAGmNvyRm8v1iuBLodREP4kn4VbhMSZDtH7D6FYfmJh5fSeG09bSe51G5Xh
 zv/B8A1cCbWFqtQHp3wI6ml8VDyAhDc2Hvqb75KRn6FplIkEiszVP0y3cNHWiJVt
 Ix6Sysoa6kQDXEgR50APeLJ3VI+/mhXmvIila4jP9PKhO14SDHrCoRQO62Z0COJ7
 2E5Ir2KE8T+O9mSeuB7m8xD/t60HDd3q3tLZmH0Ps6xfxKf9y2hdZacbX4Hi5Mqk
 2XxXZYnhAXUqZmZhmG3ajnEiB4UGMt21R7dIqNTaQ9chOGBkHqIZxPm82XtNb13h
 yHILavGpUDT0z6OB2z8fxUcj4a4SrrK+aiIGh4iFpDR0Nu0IyZ5cPHXY2FfvJWmD
 ZO74RMEpBodYR8BsV4yP
 =uZ5N
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Here's another set of patches for the current cycle:
 * I merged net-next back to avoid a conflict with the
 * cfg80211 scheduled scan API extensions
 * preparations for better scan result timestamping
 * regulatory cleanups
 * mac80211 statistics cleanups
 * a few other small cleanups and fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 07:28:41 -07:00
Johannes Berg e5a9f8d046 mac80211: move station statistics into sub-structs
Group station statistics by where they're (mostly) updated
(TX, RX and TX-status) and group them into sub-structs of
the struct sta_info.

Also rename the variables since the grouping now makes it
obvious where they belong.

This makes it easier to identify where the statistics are
updated in the code, and thus easier to think about them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21 10:08:22 +02:00
Johannes Berg 976bd9efda mac80211: move beacon_loss_count into ifmgd
There's little point in keeping (and even sending to userspace)
the beacon_loss_count value per station, since it can only apply
to the AP on a managed-mode connection. Move the value to ifmgd,
advertise it only in managed mode, and remove it from ethtool as
it's available through better interfaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21 10:08:21 +02:00
Johannes Berg 763aa27a29 mac80211: remove sta->last_ack_signal
This file only feeds a debugfs file that isn't very useful, so remove
it. If necessary, we can add other ways to get this information, for
example in the NL80211_CMD_PROBE_CLIENT response.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21 10:08:21 +02:00
David S. Miller 26440c835f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	net/ipv4/inet_connection_sock.c
	net/switchdev/switchdev.c

In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.

The other two conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20 06:08:27 -07:00
Johannes Berg 6f1f5d5f4d mac80211: remove event.c
That file contains just a single function, which itself is just a
single statement to call a different function. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:40:26 +02:00
Johannes Berg 3beea3513f mac80211: remove cfg.h
The file contains just a single declaration that can easily
move to another file - remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:36:43 +02:00
Johannes Berg fbd6ff5cea mac80211: move sta_set_rate_info_rx() and make it static
There's only a single caller of this function, so it can
be moved to the same file and made static.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:31:30 +02:00
Johannes Berg a732fa7001 mac80211: clean up ieee80211_rx_h_check_dup code
Reduce indentation a bit to make the condition more readable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:27:07 +02:00
Johannes Berg 4a733ef1be mac80211: remove PM-QoS listener
As this API has never really seen any use and most drivers don't
ever use the value derived from it, remove it.

Change the only driver using it (rt2x00) to simply use the DTIM
period instead of the "max sleep" time.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:04:08 +02:00
Johannes Berg 61f6bba006 mac80211: use new cfg80211_inform_bss_frame_data() API
The new API is more easily extensible with a metadata struct
passed to it, use it in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 11:36:21 +02:00
Avraham Stern e2845c458e mac80211: Do not restart scheduled scan if multiple scan plans are set
If multiple scan plans were set for scheduled scan, do not restart
scheduled scan on reconfig because it is possible that some scan
plans were already completed and there is no need to run them all
over again. Instead, notify userspace that scheduled scan stopped
so it can configure new scan plans for scheduled scan.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:35:51 +02:00
Mohammed Shafi Shajakhan 4633dfc32c mac80211: Fix hwflags debugfs file format
Commit 30686bf7f5 ("mac80211: convert HW flags to unsigned long
bitmap") accidentally removed the newline delimiter from the hwflags
debugfs file. Fix this by adding back the newline between the HW flags.

Cc: stable@vger.kernel.org [4.2]
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
[fix commit log]
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:30:56 +02:00
Tamizh chelvam 93f0490e5d Revert "mac80211: remove exposing 'mfp' to drivers"
This reverts commit 5c48f12017.

Some device drivers (ath10k) offload part of aggregation including AddBA/DelBA
negotiations to firmware. In such scenario, the PMF configuration of
the station needs to be provided to driver to enable encryption of
AddBA/DelBA action frames.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:29:11 +02:00
Johannes Berg 985f2c87a7 Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:28:43 +02:00
Felix Fietkau 4d57c67827 mac80211: add missing struct ieee80211_txq tid field initialization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-08 11:10:50 +02:00
David S. Miller 2579c98f0d For the current cycle, we have the following right now:
* many internal fixes, API improvements, cleanups, etc.
  * full AP client state tracking in cfg80211/mac80211 from Ayala
  * VHT support (in mac80211) for mesh
  * some A-MSDU in A-MPDU support from Emmanuel
  * show current TX power to userspace (from Rafał)
  * support for netlink dump in vendor commands (myself)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJWEp5XAAoJEDBSmw7B7bqr8DsQAICgQL7gSkHUlc6rbMJ9MzX+
 9W0SNpZHSmfE0ZsL3cCoeHbk5dGhX82GumIz4GeqtvIKUNHkC8qlnXJIKTEva+sp
 PjcF1wS0qQFdt6sg/Zxq+4Q8lZrZf1xP9W0x0ORYi9d9qej07JAZku8zYt4agpNV
 R4nCl/gKVF375aV8y+qi+WSZXx4j80dJkokoVk4hzotWjd0bGVL1T9YwDRzxg4FI
 S0DnkxlsD3MRHJXq+9+DbF5cuTjCG2LZNcDIBy455eWN27j9CWgEPVXoySQjDgQc
 ayf2siw7BccqnV84et0vi+0WYXdZCHm3zCen44s4vaCflhdGxdx48V+Lib6mluR3
 OEM1V1l9uV97UyORPljRKvDURq2IUdLQw00of26CTX8qEnmQIfxC7qaRg0rYEiGW
 SbTClbEiEkBLV+sCStnkv8GJHNpvtI/2VQXH1ydrHsrWC3Sl9bpPOWYlNBPwdzM9
 U4zgpxf6gLqlsukQKmMDmoKW7T04Fs0qgE99ThU2x6uTGsux8bfbxgzPCfUdeY8M
 HmCB5oBCZKJ5pzv6z6lUGc0cO42IL50aBrrlatrEekjevUXW3MMOZCwGrUXxpMw1
 gd+2PnLCCUeDyKNvkpXEgr4uS9Egc0sWH1RlpDPaAA5gRdRHiDn7MK7Z+s5OpNIC
 wnFCQKB+KrNNrQFuXz9k
 =BF9F
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
For the current cycle, we have the following right now:
 * many internal fixes, API improvements, cleanups, etc.
 * full AP client state tracking in cfg80211/mac80211 from Ayala
 * VHT support (in mac80211) for mesh
 * some A-MSDU in A-MPDU support from Emmanuel
 * show current TX power to userspace (from Rafał)
 * support for netlink dump in vendor commands (myself)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 04:29:18 -07:00
Andrzej Hajda 5edfcee5ed mac80211: make ieee80211_new_mesh_header return unsigned
The function returns always non-negative values.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-05 17:54:16 +02:00
Arnd Bergmann 84b00607ae mac80211: use ktime_get_seconds
The mac80211 code uses ktime_get_ts to measure the connected time.
As this uses monotonic time, it is y2038 safe on 32-bit systems,
but we still want to deprecate the use of 'timespec' because most
other users are broken.

This changes the code to use ktime_get_seconds() instead, which
avoids the timespec structure and is slightly more efficient.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05 03:16:45 -07:00
Johannes Berg 076cdcb12f mac80211: use bool argument to ieee80211_send_nullfunc
Instead of int with 0/1, use bool with false/true for the
powersave argument to ieee80211_send_nullfunc().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:52 +02:00
Johannes Berg 90d13e8f5b mac80211: reduce indentation by inlining a check
Instead of nesting two if statements, inline the second
check into the first if statement and to indentation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:52 +02:00
Felix Fietkau 50f36ae61a mac80211: fix tx sequence number assignment with software queue + fast-xmit
When using software queueing, tx sequence number assignment happens at
ieee80211_tx_dequeue time, so the fast-xmit codepath must not do that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:51 +02:00
Ayala Beker 44674d9c22 mac80211: advertise support for full station state in AP mode
This enables adding stations in unauthenticated mode, just after
receiving the first authentication frame; which in turn allows
sending a negative authentication reply if the station cannot be
added.

In addition init rate control for unassociated station only when
it becomes associated, prior to that low rates will be used.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:51 +02:00
Johannes Berg d0a77c6569 mac80211: allow writing TX PN in debugfs
For certain tests, for example replay detection, it can be useful
to be able to influence/set the PN used in outgoing packets. Make
it possible to change the TX PN in debugfs.

For now, this doesn't support TKIP since I haven't needed it, but
there's no reason it couldn't be added if necessary.

Note that this must be used very carefully: it could, for example,
be used to make "valid replays" where the PN reuse happens on a
different TID. This couldn't be done by an attacker since the TID
is protected as part of the AAD.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:50 +02:00
Denys Vlasenko 416eb9fc29 mac80211: Deinline drv_get/set/reset_tsf()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining these functions have sizes and callsite counts
as follows:

drv_get_tsf: 634 bytes, 6 calls
drv_set_tsf: 626 bytes, 2 calls
drv_reset_tsf: 617 bytes, 2 calls

Total size reduction is about 4.2 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:49 +02:00
Denys Vlasenko 6db9683897 mac80211: Deinline drv_ampdu_action()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 755 bytes and there are
6 callsites.

Total size reduction is about 3.3 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:49 +02:00
Denys Vlasenko 42677ed33a mac80211: Deinline drv_switch_vif_chanctx()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 821 bytes and there are
2 callsites, reducing code size by about 800 bytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
[adjust code-style a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:48 +02:00
Johannes Berg 0e5c371aa0 mac80211: improve __rate_control_send_low warning
If there are no supported rates in the rate mask with the required
flags, we warn, but it's not clear which part causes the warning.

Add the relevant data to the warning to understand why it happens.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:48 +02:00
Johannes Berg a0c391b134 mac80211: minstrel[_ht]: remove non-ascii debugfs characters
Replace the average symbol by "avg" to avoid being warned about the
non-ASCII symbol all the time, line up the columns properly.

(I changed my mind - the warnings are getting annoying)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:47 +02:00
Eliad Peller 2739271954 mac80211: don't tear down aggregation on suspend in case of wowlan->any
In case of "any" wowlan trigger, there is no reason to tear down
aggregations, as we want the device to continue working normally.

Similarly, there's no reason to tear down aggregations on resume,
as they should have been torn down on suspend if needed.
However, since the reconfiguration flow is shared with HW restart,
tear down aggregations on reconfiguration when we are not resuming.

To keep things working after non-wowlan suspend, keep clearing the
WLAN_STA_BLOCK_BA flag.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:47 +02:00
Denys Vlasenko 9aae296a62 mac80211: Deinline drv_add/remove/change_interface()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining these functions have sizes and callsite counts
as follows:

drv_add_interface: 638 bytes, 5 calls
drv_remove_interface: 611 bytes, 6 calls
drv_change_interface: 658 bytes, 1 call

Total size reduction is about 9 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:46 +02:00
Denys Vlasenko 4fbd572c29 mac80211: Deinline drv_sta_rc_update()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 706 bytes and there are
2 callsites, reducing code size by about 700 bytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:45 +02:00
Denys Vlasenko b23dcd4aca mac80211: Deinline drv_conf_tx()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 785 bytes and there are
7 callsites.

Total size reduction is about 3.5 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:45 +02:00
Helmut Schaa 35afa58862 mac80211: Copy tx'ed beacons to monitor mode
When debugging wireless powersave issues on the AP side it's quite helpful
to see our own beacons that are transmitted by the hardware/driver. However,
this is not that easy since beacons don't pass through the regular TX queues.

Preferably drivers would call ieee80211_tx_status also for tx'ed beacons
but that's not always possible. Hence, just send a copy of each beacon
generated by ieee80211_beacon_get_tim to monitor devices when they are
getting fetched by the driver.

Also add a HW flag IEEE80211_HW_BEACON_TX_STATUS that can be used by
drivers to indicate that they report TX status for beacons.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
(with a fix from Christian Lamparted rolled in)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:33 +02:00
Felix Fietkau f7418bc10d mac80211: fix handling of PS filtering with fast-xmit
Fixes dropped packets in the tx path in case a non-PS station triggers
the tx filter.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-24 16:28:01 +02:00
Sara Sharon babc305e21 mac80211: reset CQM history upon reconfiguration
The current behavior of notifying CQM events is inconsistent:
Upon first configuration there is a cqm event with the current
status according to threshold configured, regardless of signal
stability.
When there is reconfiguration no event is sent unless there is
a significant change to the signal level according to the new
configuration.

Since the current reconfiguration behavior might cause missing
CQM events in case the current signal did not change but is on
the other side of the new threshold, fix that by resetting the
stored signal level upon reconfiguration.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:22:50 +02:00