We used to use this in a few spots, but now we only use it directly
inside of block-group.c, so remove the helper and just open code where
we were using it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before when this was modifying the bit field we had to protect it with
the bg->lock, however now we're using bit helpers so we can stop
using the bg->lock.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used mostly to determine if we need to look at the caching ctl
list and clean up any references to this block group. However we never
clear this flag, specifically because we need to know if we have to
remove a caching ctl we have for this block group still. This is in the
remove block group path which isn't a fast path, so the optimization
doesn't really matter, simplify this logic and remove the flag.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're breaking out and re-searching for the next block group while
evicting any of the block group cache inodes. This is not needed, the
block groups aren't disappearing here, we can simply loop through the
block groups like normal and iput any inode that we find.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use this during device replace for zoned devices, we were simply
taking the lock because it was in a bit field and we needed the lock to
be safe with other modifications in the bitfield. With the bit helpers
we no longer require that locking.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use a bit field in the btrfs_block_group for different flags, however
this is awkward because we have to hold the block_group->lock for any
modification of any of these fields, and makes the code clunky for a few
of these flags. Convert these to a properly flags setup so we can
utilize the bit helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We previously had the pattern of
btrfs_update_space_info(all, the, bg, fields, &space_info);
link_block_group(bg);
bg->space_info = space_info;
Now that we're passing the bg into btrfs_add_bg_to_space_info we can do
the linking in that function, transforming this to simply
btrfs_add_bg_to_space_info(fs_info, bg);
and put the link_block_group() and bg->space_info assignment directly in
btrfs_add_bg_to_space_info.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has grown a bunch of new arguments, and it just boils down
to passing in all the block group fields as arguments. Simplify this by
passing in the block group itself and updating the space_info fields
based on the block group fields directly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For both unused bg deletion and async balance work we'll happily run if
the fs is closing. However I want to move these to their own worker
thread, and they can be long running jobs, so add a check to see if
we're closing and simply bail.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_insert_file_extent() is only ever used to insert holes, so rename
it and remove the redundant parameters.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have own string matching helper that duplicates what sysfs_streq
does, with a slight difference that it skips initial whitespace. So far
this is used for the drive allocation policy. The initial whitespace
of written sysfs values should be rather discouraged and we should use a
standard helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script shows that, although scrub can detect super block
errors, it never tries to fix it:
mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2
xfs_io -c "pwrite 67108864 4k" $dev2
mount $dev1 $mnt
btrfs scrub start -B $dev2
btrfs scrub start -Br $dev2
umount $mnt
The first scrub reports the super error correctly:
scrub done for f3289218-abd3-41ac-a630-202f766c0859
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
But the second read-only scrub still reports the same super error:
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
[CAUSE]
The comments already shows that super block can be easily fixed by
committing a transaction:
/*
* If we find an error in a super block, we just report it.
* They will get written with the next transaction commit
* anyway
*/
But the truth is, such assumption is not always true, and since scrub
should try to repair every error it found (except for read-only scrub),
we should really actively commit a transaction to fix this.
[FIX]
Just commit a transaction if we found any super block errors, after
everything else is done.
We cannot do this just after scrub_supers(), as
btrfs_commit_transaction() will try to pause and wait for the running
scrub, thus we can not call it with scrub_lock hold.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
Unlike data/metadata corruption, if scrub detected some error in the
super block, the only error message is from the updated device status:
BTRFS info (device dm-1): scrub: started on devid 2
BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0
This is not helpful at all.
[CAUSE]
Unlike data/metadata error reporting, there is no visible report in
kernel dmesg to report supper block errors.
In fact, return value of scrub_checksum_super() is intentionally
skipped, thus scrub_handle_errored_block() will never be called for
super blocks.
[FIX]
Make super block errors to output an error message, now the full
dmesg would looks like this:
BTRFS info (device dm-1): scrub: started on devid 2
BTRFS warning (device dm-1): super block error on device /dev/mapper/test-scratch2, physical 67108864
BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0
BTRFS info (device dm-1): scrub: started on devid 2
This fix involves:
- Move the super_errors reporting to scrub_handle_errored_block()
This allows the device status message to show after the super block
error message.
But now we no longer distinguish super block corruption and generation
mismatch, now all counted as corruption.
- Properly check the return value from scrub_checksum_super()
- Add extra super block error reporting for scrub_print_warning().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With CONFIG_READ_ONLY_THP_FOR_FS, the Linux kernel supports using THPs for
read-only mmapped files, such as shared libraries. However, the kernel
makes no attempt to actually align those mappings on 2MB boundaries,
which makes it impossible to use those THPs most of the time. This issue
applies to general file mapping THP as well as existing setups using
CONFIG_READ_ONLY_THP_FOR_FS. This is easily fixed by using
thp_get_unmapped_area for the unmapped_area function in btrfs, which
is what ext2, ext4, fuse, and xfs all use.
Initially btrfs had been left out in commit 8c07fc452ac0 ("btrfs: fix
alignment of VMA for memory mapped files on THP") as btrfs does not support
DAX. However, commit 1854bc6e24 ("mm/readahead: Align file mappings
for non-DAX") removed the DAX requirement. We should now be able to call
thp_get_unmapped_area() for btrfs.
The problem can be seen in /proc/PID/smaps where THPeligible is set to 0
on mappings to eligible shared object files as shown below.
Before this patch:
7fc6a7e18000-7fc6a80cc000 r-xp 00000000 00:1e 199856
/usr/lib64/libcrypto.so.1.1.1k
Size: 2768 kB
THPeligible: 0
VmFlags: rd ex mr mw me
With this patch the library is mapped at a 2MB aligned address:
fbdfe200000-7fbdfe4b4000 r-xp 00000000 00:1e 199856
/usr/lib64/libcrypto.so.1.1.1k
Size: 2768 kB
THPeligible: 1
VmFlags: rd ex mr mw me
This fixes the alignment of VMAs for any mmap of a file that has the
rd and ex permissions and size >= 2MB. The VMA alignment and
THPeligible field for anonymous memory is handled separately and
is thus not effected by this change.
CC: stable@vger.kernel.org # 5.18+
Signed-off-by: Alexander Zhu <alexlzhu@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This wait event is very similar to the pending ordered wait event in the
sense that it occurs in a different context than the condition signaling
for the event. The signaling occurs in btrfs_remove_ordered_extent()
while the wait event is implemented in btrfs_start_ordered_extent() in
fs/btrfs/ordered-data.c
However, in this case a thread must not acquire the lockdep map for the
ordered extents wait event when the ordered extent is related to a free
space inode. That is because lockdep creates dependencies between locks
acquired both in execution paths related to normal inodes and paths
related to free space inodes, thus leading to false positives.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reinitialize the class of the lockdep map for struct inode's
mapping->invalidate_lock in load_free_space_cache() function in
fs/btrfs/free-space-cache.c. This will prevent lockdep from producing
false positives related to execution paths that make use of free space
inodes and paths that make use of normal inodes.
Specifically, with this change lockdep will create separate lock
dependencies that include the invalidate_lock, in the case that free
space inodes are used and in the case that normal inodes are used.
The lockdep class for this lock was first initialized in
inode_init_always() in fs/inode.c.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In contrast to the num_writers and num_extwriters wait events, the
condition for the pending ordered wait event is signaled in a different
context from the wait event itself. The condition signaling occurs in
btrfs_remove_ordered_extent() in fs/btrfs/ordered-data.c while the wait
event is implemented in btrfs_commit_transaction() in
fs/btrfs/transaction.c
Thus the thread signaling the condition has to acquire the lockdep map
as a reader at the start of btrfs_remove_ordered_extent() and release it
after it has signaled the condition. In this case some dependencies
might be left out due to the placement of the annotation, but it is
better than no annotation at all.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add lockdep annotations for the transaction states that have wait
events;
1) TRANS_STATE_COMMIT_START
2) TRANS_STATE_UNBLOCKED
3) TRANS_STATE_SUPER_COMMITTED
4) TRANS_STATE_COMPLETED
The new macros introduced here to annotate the transaction states wait
events have the same effect as the generic lockdep annotation macros.
With the exception of the lockdep annotation for TRANS_STATE_COMMIT_START
the transaction thread has to acquire the lockdep maps for the
transaction states as reader after the lockdep map for num_writers is
released so that lockdep does not complain.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similarly to the num_writers wait event in fs/btrfs/transaction.c add a
lockdep annotation for the num_extwriters wait event.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Annotate the num_writers wait event in fs/btrfs/transaction.c with
lockdep in order to catch deadlocks involving this wait event.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce four macros that are used to annotate wait events in btrfs code
with lockdep;
1) the btrfs_lockdep_init_map
2) the btrfs_lockdep_acquire,
3) the btrfs_lockdep_release
4) the btrfs_might_wait_for_event macros.
The btrfs_lockdep_init_map macro is used to initialize a lockdep map.
The btrfs_lockdep_<acquire,release> macros are used by threads to take
the lockdep map as readers (shared lock) and release it, respectively.
The btrfs_might_wait_for_event macro is used by threads to take the
lockdep map as writers (exclusive lock) and release it.
In general, the lockdep annotation for wait events work as follows:
The condition for a wait event can be modified and signaled at the same
time by multiple threads. These threads hold the lockdep map as readers
when they enter a context in which blocking would prevent signaling the
condition. Frequently, this occurs when a thread violates a condition
(lockdep map acquire), before restoring it and signaling it at a later
point (lockdep map release).
The threads that block on the wait event take the lockdep map as writers
(exclusive lock). These threads have to block until all the threads that
hold the lockdep map as readers signal the condition for the wait event
and release the lockdep map.
The lockdep annotation is used to warn about potential deadlock scenarios
that involve the threads that modify and signal the wait event condition
and threads that block on the wait event. A simple example is illustrated
below:
Without lockdep:
TA TB
cond = false
lock(A)
wait_event(w, cond)
unlock(A)
lock(A)
cond = true
signal(w)
unlock(A)
With lockdep:
TA TB
rwsem_acquire_read(lockdep_map)
cond = false
lock(A)
rwsem_acquire(lockdep_map)
rwsem_release(lockdep_map)
wait_event(w, cond)
unlock(A)
lock(A)
cond = true
signal(w)
unlock(A)
rwsem_release(lockdep_map)
In the second case, with the lockdep annotation, lockdep would warn about
an ABBA deadlock, while the first case would just deadlock at some point.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is an internal report on hitting the following ASSERT() in
recalculate_thresholds():
ASSERT(ctl->total_bitmaps <= max_bitmaps);
Above @max_bitmaps is calculated using the following variables:
- bytes_per_bg
8 * 4096 * 4096 (128M) for x86_64/x86.
- block_group->length
The length of the block group.
@max_bitmaps is the rounded up value of block_group->length / 128M.
Normally one free space cache should not have more bitmaps than above
value, but when it happens the ASSERT() can be triggered if
CONFIG_BTRFS_ASSERT is also enabled.
But the ASSERT() itself won't provide enough info to know which is going
wrong.
Is the bg too small thus it only allows one bitmap?
Or is there something else wrong?
So although I haven't found extra reports or crash dump to do further
investigation, add the extra info to make it more helpful to debug.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=4Hu8
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- two fixes for hangs in the umount sequence where threads depend on
each other and the work must be finished in the right order
- in zoned mode, wait for flushing all block group metadata IO before
finishing the zone
* tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: wait for extent buffer IOs before finishing a zone
btrfs: fix hang during unmount when stopping a space reclaim worker
btrfs: fix hang during unmount when stopping block group reclaim worker
Before sending REQ_OP_ZONE_FINISH to a zone, we need to ensure that
ongoing IOs already finished. Or, we will see a "Zone Is Full" error for
the IOs, as the ZONE_FINISH command makes the zone full.
We ensure that with btrfs_wait_block_group_reservations() and
btrfs_wait_ordered_roots() for a data block group. And, for a metadata
block group, the comparison of alloc_offset vs meta_write_pointer mostly
ensures IOs for the allocated region already sent. However, there still
can be a little time frame where the IOs are sent but not yet completed.
Introduce wait_eb_writebacks() to ensure such IOs are completed for a
metadata block group. It walks the buffer_radix to find extent buffers in
the block group and calls wait_on_extent_buffer_writeback() on them.
Fixes: afba2bc036 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 5.19+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Often when running generic/562 from fstests we can hang during unmount,
resulting in a trace like this:
Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00
Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds.
Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1
Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000
Sep 07 11:55:32 debian9 kernel: Call Trace:
Sep 07 11:55:32 debian9 kernel: <TASK>
Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0
Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70
Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0
Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130
Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0
Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420
Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0
Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200
Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0
Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530
Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140
Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30
Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0
Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs]
Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170
Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs]
Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0
Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120
Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30
Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs]
Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0
Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160
Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0
Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0
Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40
Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90
Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd
Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7
Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7
Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0
Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570
Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000
Sep 07 11:55:32 debian9 kernel: </TASK>
What happens is the following:
1) The cleaner kthread tries to start a transaction to delete an unused
block group, but the metadata reservation can not be satisfied right
away, so a reservation ticket is created and it starts the async
metadata reclaim task (fs_info->async_reclaim_work);
2) Writeback for all the filler inodes with an i_size of 2K starts
(generic/562 creates a lot of 2K files with the goal of filling
metadata space). We try to create an inline extent for them, but we
fail when trying to insert the inline extent with -ENOSPC (at
cow_file_range_inline()) - since this is not critical, we fallback
to non-inline mode (back to cow_file_range()), reserve extents, create
extent maps and create the ordered extents;
3) An unmount starts, enters close_ctree();
4) The async reclaim task is flushing stuff, entering the flush states one
by one, until it reaches RUN_DELAYED_IPUTS. There it runs all current
delayed iputs.
After running the delayed iputs and before calling
btrfs_wait_on_delayed_iputs(), one or more ordered extents complete,
and btrfs_add_delayed_iput() is called for each one through
btrfs_finish_ordered_io() -> btrfs_put_ordered_extent(). This results
in bumping fs_info->nr_delayed_iputs from 0 to some positive value.
So the async reclaim task blocks at btrfs_wait_on_delayed_iputs() waiting
for fs_info->nr_delayed_iputs to become 0;
5) The current transaction is committed by the transaction kthread, we then
start unpinning extents and end up calling btrfs_try_granting_tickets()
through unpin_extent_range(), since we released some space.
This results in satisfying the ticket created by the cleaner kthread at
step 1, waking up the cleaner kthread;
6) At close_ctree() we ask the cleaner kthread to park;
7) The cleaner kthread starts the transaction, deletes the unused block
group, and then calls kthread_should_park(), which returns true, so it
parks. And at this point we have the delayed iputs added by the
completion of the ordered extents still pending;
8) Then later at close_ctree(), when we call:
cancel_work_sync(&fs_info->async_reclaim_work);
We hang forever, since the cleaner was parked and no one else can run
delayed iputs after that, while the reclaim task is waiting for the
remaining delayed iputs to be completed.
Fix this by waiting for all ordered extents to complete and running the
delayed iputs before attempting to stop the async reclaim tasks. Note that
we can not wait for ordered extents with btrfs_wait_ordered_roots() (or
other similar functions) because that waits for the BTRFS_ORDERED_COMPLETE
flag to be set on an ordered extent, but the delayed iput is added after
that, when doing the final btrfs_put_ordered_extent(). So instead wait for
the work queues used for executing ordered extent completion to be empty,
which works because we do the final put on an ordered extent at
btrfs_finish_ordered_io() (while we are in the unmount context).
Fixes: d6fd0ae25c ("Btrfs: fix missing delayed iputs on unmount")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During early unmount, at close_ctree(), we try to stop the block group
reclaim task with cancel_work_sync(), but that may hang if the block group
reclaim task is currently at btrfs_relocate_block_group() waiting for the
flag BTRFS_FS_UNFINISHED_DROPS to be cleared from fs_info->flags. During
unmount we only clear that flag later, after trying to stop the block
group reclaim task.
Fix that by clearing BTRFS_FS_UNFINISHED_DROPS before trying to stop the
block group reclaim task and after setting BTRFS_FS_CLOSING_START, so that
if the reclaim task is waiting on that bit, it will stop immediately after
being woken, because it sees the filesystem is closing (with a call to
btrfs_fs_closing()), and then returns immediately with -EINTR.
Fixes: 31e70e5278 ("btrfs: fix hang during unmount when block group reclaim task is running")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=WD7B
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes to zoned mode and one regression fix for chunk limit:
- Zoned mode fixes:
- fix how wait/wake up is done when finishing zone
- fix zone append limit in emulated mode
- fix mount on devices with conventional zones
- fix regression, user settable data chunk limit got accidentally
lowered and causes allocation problems on some profiles (raid0,
raid1)"
* tag 'for-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the max chunk size and stripe length calculation
btrfs: zoned: fix mounting with conventional zones
btrfs: zoned: set pseudo max append zone limit in zone emulation mode
btrfs: zoned: fix API misuse of zone finish waiting
[BEHAVIOR CHANGE]
Since commit f6fca3917b ("btrfs: store chunk size in space-info
struct"), btrfs no longer can create larger data chunks than 1G:
mkfs.btrfs -f -m raid1 -d raid0 $dev1 $dev2 $dev3 $dev4
mount $dev1 $mnt
btrfs balance start --full $mnt
btrfs balance start --full $mnt
umount $mnt
btrfs ins dump-tree -t chunk $dev1 | grep "DATA|RAID0" -C 2
Before that offending commit, what we got is a 4G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Now what we got is only 1G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 6271533056) itemoff 15491 itemsize 176
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
This will increase the number of data chunks by the number of devices,
not only increase system chunk usage, but also greatly increase mount
time.
Without a proper reason, we should not change the max chunk size.
[CAUSE]
Previously, we set max data chunk size to 10G, while max data stripe
length to 1G.
Commit f6fca3917b ("btrfs: store chunk size in space-info struct")
completely ignored the 10G limit, but use 1G max stripe limit instead,
causing above shrink in max data chunk size.
[FIX]
Fix the max data chunk size to 10G, and in decide_stripe_size_regular()
we limit stripe_size to 1G manually.
This should only affect data chunks, as for metadata chunks we always
set the max stripe size the same as max chunk size (256M or 1G
depending on fs size).
Now the same script result the same old result:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Fixes: f6fca3917b ("btrfs: store chunk size in space-info struct")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 6a921de589 ("btrfs: zoned: introduce
space_info->active_total_bytes"), we're only counting the bytes of a
block group on an active zone as usable for metadata writes. But on a
SMR drive, we don't have active zones and short circuit some of the
logic.
This leads to an error on mount, because we cannot reserve space for
metadata writes.
Fix this by also setting the BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE bit in the
block-group's runtime flag if the zone is a conventional zone.
Fixes: 6a921de589 ("btrfs: zoned: introduce space_info->active_total_bytes")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit 7d7672bc5d ("btrfs: convert count_max_extents() to use
fs_info->max_extent_size") introduced a division by
fs_info->max_extent_size. This max_extent_size is initialized with max
zone append limit size of the device btrfs runs on. However, in zone
emulation mode, the device is not zoned then its zone append limit is
zero. This resulted in zero value of fs_info->max_extent_size and caused
zero division error.
Fix the error by setting non-zero pseudo value to max append zone limit
in zone emulation mode. Set the pseudo value based on max_segments as
suggested in the commit c2ae7b772e ("btrfs: zoned: revive
max_zone_append_bytes").
Fixes: 7d7672bc5d ("btrfs: convert count_max_extents() to use fs_info->max_extent_size")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit 2ce543f478 ("btrfs: zoned: wait until zone is finished when
allocation didn't progress") implemented a zone finish waiting mechanism
to the write path of zoned mode. However, using
wait_var_event()/wake_up_all() on fs_info->zone_finish_wait is wrong and
wait_var_event() just hangs because no one ever wakes it up once it goes
into sleep.
Instead, we can simply use wait_on_bit_io() and clear_and_wake_up_bit()
on fs_info->flags with a proper barrier installed.
Fixes: 2ce543f478 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=p8YV
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- check that subvolume is writable when changing xattrs from security
namespace
- fix memory leak in device lookup helper
- update generation of hole file extent item when merging holes
- fix space cache corruption and potential double allocations; this
is a rare bug but can be serious once it happens, stable backports
and analysis tool will be provided
- fix error handling when deleting root references
- fix crash due to assert when attempting to cancel suspended device
replace, add message what to do if mount fails due to missing
replace item
Regressions:
- don't merge pages into bio if their page offset is not contiguous
- don't allow large NOWAIT direct reads, this could lead to short
reads eg. in io_uring"
* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add info when mount fails due to stale replace target
btrfs: replace: drop assert for suspended replace
btrfs: fix silent failure when deleting root reference
btrfs: fix space cache corruption and potential double allocations
btrfs: don't allow large NOWAIT direct reads
btrfs: don't merge pages into bio if their page offset is not contiguous
btrfs: update generation of hole file extent item when merging holes
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
btrfs: check if root is readonly while setting security xattr
If the replace target device reappears after the suspended replace is
cancelled, it blocks the mount operation as it can't find the matching
replace-item in the metadata. As shown below,
BTRFS error (device sda5): replace devid present without an active replace item
To overcome this situation, the user can run the command
btrfs device scan --forget <replace target device>
and try the mount command again. And also, to avoid repeating the issue,
superblock on the devid=0 must be wiped.
wipefs -a device-path-to-devid=0.
This patch adds some info when this situation occurs.
Reported-by: Samuel Greiner <samuel@balkonien.org>
Link: https://lore.kernel.org/linux-btrfs/b4f62b10-b295-26ea-71f9-9a5c9299d42c@balkonien.org/T/
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the filesystem mounts with the replace-operation in a suspended state
and try to cancel the suspended replace-operation, we hit the assert. The
assert came from the commit fe97e2e173 ("btrfs: dev-replace: replace's
scrub must not be running in suspended state") that was actually not
required. So just remove it.
$ mount /dev/sda5 /btrfs
BTRFS info (device sda5): cannot continue dev_replace, tgtdev is missing
BTRFS info (device sda5): you may cancel the operation after 'mount -o degraded'
$ mount -o degraded /dev/sda5 /btrfs <-- success.
$ btrfs replace cancel /btrfs
kernel: assertion failed: ret != -ENOTCONN, in fs/btrfs/dev-replace.c:1131
kernel: ------------[ cut here ]------------
kernel: kernel BUG at fs/btrfs/ctree.h:3750!
After the patch:
$ btrfs replace cancel /btrfs
BTRFS info (device sda5): suspended dev_replace from /dev/sda5 (devid 1) to <missing disk> canceled
Fixes: fe97e2e173 ("btrfs: dev-replace: replace's scrub must not be running in suspended state")
CC: stable@vger.kernel.org # 5.0+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_del_root_ref(), if btrfs_search_slot() returns an error, we end
up returning from the function with a value of 0 (success). This happens
because the function returns the value stored in the variable 'err',
which is 0, while the error value we got from btrfs_search_slot() is
stored in the 'ret' variable.
So fix it by setting 'err' with the error value.
Fixes: 8289ed9f93 ("btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When testing space_cache v2 on a large set of machines, we encountered a
few symptoms:
1. "unable to add free space :-17" (EEXIST) errors.
2. Missing free space info items, sometimes caught with a "missing free
space info for X" error.
3. Double-accounted space: ranges that were allocated in the extent tree
and also marked as free in the free space tree, ranges that were
marked as allocated twice in the extent tree, or ranges that were
marked as free twice in the free space tree. If the latter made it
onto disk, the next reboot would hit the BUG_ON() in
add_new_free_space().
4. On some hosts with no on-disk corruption or error messages, the
in-memory space cache (dumped with drgn) disagreed with the free
space tree.
All of these symptoms have the same underlying cause: a race between
caching the free space for a block group and returning free space to the
in-memory space cache for pinned extents causes us to double-add a free
range to the space cache. This race exists when free space is cached
from the free space tree (space_cache=v2) or the extent tree
(nospace_cache, or space_cache=v1 if the cache needs to be regenerated).
struct btrfs_block_group::last_byte_to_unpin and struct
btrfs_block_group::progress are supposed to protect against this race,
but commit d0c2f4fa55 ("btrfs: make concurrent fsyncs wait less when
waiting for a transaction commit") subtly broke this by allowing
multiple transactions to be unpinning extents at the same time.
Specifically, the race is as follows:
1. An extent is deleted from an uncached block group in transaction A.
2. btrfs_commit_transaction() is called for transaction A.
3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed
ref for the deleted extent.
4. __btrfs_free_extent() -> do_free_extent_accounting() ->
add_to_free_space_tree() adds the deleted extent back to the free
space tree.
5. do_free_extent_accounting() -> btrfs_update_block_group() ->
btrfs_cache_block_group() queues up the block group to get cached.
block_group->progress is set to block_group->start.
6. btrfs_commit_transaction() for transaction A calls
switch_commit_roots(). It sets block_group->last_byte_to_unpin to
block_group->progress, which is block_group->start because the block
group hasn't been cached yet.
7. The caching thread gets to our block group. Since the commit roots
were already switched, load_free_space_tree() sees the deleted extent
as free and adds it to the space cache. It finishes caching and sets
block_group->progress to U64_MAX.
8. btrfs_commit_transaction() advances transaction A to
TRANS_STATE_SUPER_COMMITTED.
9. fsync calls btrfs_commit_transaction() for transaction B. Since
transaction A is already in TRANS_STATE_SUPER_COMMITTED and the
commit is for fsync, it advances.
10. btrfs_commit_transaction() for transaction B calls
switch_commit_roots(). This time, the block group has already been
cached, so it sets block_group->last_byte_to_unpin to U64_MAX.
11. btrfs_commit_transaction() for transaction A calls
btrfs_finish_extent_commit(), which calls unpin_extent_range() for
the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by
transaction B!), so it adds the deleted extent to the space cache
again!
This explains all of our symptoms above:
* If the sequence of events is exactly as described above, when the free
space is re-added in step 11, it will fail with EEXIST.
* If another thread reallocates the deleted extent in between steps 7
and 11, then step 11 will silently re-add that space to the space
cache as free even though it is actually allocated. Then, if that
space is allocated *again*, the free space tree will be corrupted
(namely, the wrong item will be deleted).
* If we don't catch this free space tree corruption, it will continue
to get worse as extents are deleted and reallocated.
The v1 space_cache is synchronously loaded when an extent is deleted
(btrfs_update_block_group() with alloc=0 calls btrfs_cache_block_group()
with load_cache_only=1), so it is not normally affected by this bug.
However, as noted above, if we fail to load the space cache, we will
fall back to caching from the extent tree and may hit this bug.
The easiest fix for this race is to also make caching from the free
space tree or extent tree synchronous. Josef tested this and found no
performance regressions.
A few extra changes fall out of this change. Namely, this fix does the
following, with step 2 being the crucial fix:
1. Factor btrfs_caching_ctl_wait_done() out of
btrfs_wait_block_group_cache_done() to allow waiting on a caching_ctl
that we already hold a reference to.
2. Change the call in btrfs_cache_block_group() of
btrfs_wait_space_cache_v1_finished() to
btrfs_caching_ctl_wait_done(), which makes us wait regardless of the
space_cache option.
3. Delete the now unused btrfs_wait_space_cache_v1_finished() and
space_cache_v1_done().
4. Change btrfs_cache_block_group()'s `int load_cache_only` parameter to
`bool wait` to more accurately describe its new meaning.
5. Change a few callers which had a separate call to
btrfs_wait_block_group_cache_done() to use wait = true instead.
6. Make btrfs_wait_block_group_cache_done() static now that it's not
used outside of block-group.c anymore.
Fixes: d0c2f4fa55 ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dylan and Jens reported a problem where they had an io_uring test that
was returning short reads, and bisected it to ee5b46a353 ("btrfs:
increase direct io read size limit to 256 sectors").
The root cause is their test was doing larger reads via io_uring with
NOWAIT and async. This was triggering a page fault during the direct
read, however the first page was able to work just fine and thus we
submitted a 4k read for a larger iocb.
Btrfs allows for partial IO's in this case specifically because we don't
allow page faults, and thus we'll attempt to do any io that we can,
submit what we could, come back and fault in the rest of the range and
try to do the remaining IO.
However for !is_sync_kiocb() we'll call ->ki_complete() as soon as the
partial dio is done, which is incorrect. In the sync case we can exit
the iomap code, submit more io's, and return with the amount of IO we
were able to complete successfully.
We were always doing short reads in this case, but for NOWAIT we were
getting saved by the fact that we were limiting direct reads to
sectorsize, and if we were larger than that we would return EAGAIN.
Fix the regression by simply returning EAGAIN in the NOWAIT case with
larger reads, that way io_uring can retry and get the larger IO and have
the fault logic handle everything properly.
This still leaves the AIO short read case, but that existed before this
change. The way to properly fix this would be to handle partial iocb
completions, but that's a lot of work, for now deal with the regression
in the most straightforward way possible.
Reported-by: Dylan Yudaken <dylany@fb.com>
Fixes: ee5b46a353 ("btrfs: increase direct io read size limit to 256 sectors")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Zygo reported on latest development branch, he could hit
ASSERT()/BUG_ON() caused crash when doing RAID5 recovery (intentionally
corrupt one disk, and let btrfs to recover the data during read/scrub).
And The following minimal reproducer can cause extent state leakage at
rmmod time:
mkfs.btrfs -f -d raid5 -m raid5 $dev1 $dev2 $dev3 -b 1G > /dev/null
mount $dev1 $mnt
fsstress -w -d $mnt -n 25 -s 1660807876
sync
fssum -A -f -w /tmp/fssum.saved $mnt
umount $mnt
# Wipe the dev1 but keeps its super block
xfs_io -c "pwrite -S 0x0 1m 1023m" $dev1
mount $dev1 $mnt
fssum -r /tmp/fssum.saved $mnt > /dev/null
umount $mnt
rmmod btrfs
This will lead to the following extent states leakage:
BTRFS: state leak: start 499712 end 503807 state 5 in tree 1 refs 1
BTRFS: state leak: start 495616 end 499711 state 5 in tree 1 refs 1
BTRFS: state leak: start 491520 end 495615 state 5 in tree 1 refs 1
BTRFS: state leak: start 487424 end 491519 state 5 in tree 1 refs 1
BTRFS: state leak: start 483328 end 487423 state 5 in tree 1 refs 1
BTRFS: state leak: start 479232 end 483327 state 5 in tree 1 refs 1
BTRFS: state leak: start 475136 end 479231 state 5 in tree 1 refs 1
BTRFS: state leak: start 471040 end 475135 state 5 in tree 1 refs 1
[CAUSE]
Since commit 7aa51232e2 ("btrfs: pass a btrfs_bio to
btrfs_repair_one_sector"), we always use btrfs_bio->file_offset to
determine the file offset of a page.
But that usage assume that, one bio has all its page having a continuous
page offsets.
Unfortunately that's not true, btrfs only requires the logical bytenr
contiguous when assembling its bios.
From above script, we have one bio looks like this:
fssum-27671 submit_one_bio: bio logical=217739264 len=36864
fssum-27671 submit_one_bio: r/i=5/261 page_offset=466944 <<<
fssum-27671 submit_one_bio: r/i=5/261 page_offset=724992 <<<
fssum-27671 submit_one_bio: r/i=5/261 page_offset=729088
fssum-27671 submit_one_bio: r/i=5/261 page_offset=733184
fssum-27671 submit_one_bio: r/i=5/261 page_offset=737280
fssum-27671 submit_one_bio: r/i=5/261 page_offset=741376
fssum-27671 submit_one_bio: r/i=5/261 page_offset=745472
fssum-27671 submit_one_bio: r/i=5/261 page_offset=749568
fssum-27671 submit_one_bio: r/i=5/261 page_offset=753664
Note that the 1st and the 2nd page has non-contiguous page offsets.
This means, at repair time, we will have completely wrong file offset
passed in:
kworker/u32:2-19927 btrfs_repair_one_sector: r/i=5/261 page_off=729088 file_off=475136 bio_offset=8192
Since the file offset is incorrect, we latter incorrectly set the extent
states, and no way to really release them.
Thus later it causes the leakage.
In fact, this can be even worse, since the file offset is incorrect, we
can hit cases like the incorrect file offset belongs to a HOLE, and
later cause btrfs_num_copies() to trigger error, finally hit
BUG_ON()/ASSERT() later.
[FIX]
Add an extra condition in btrfs_bio_add_page() for uncompressed IO.
Now we will have more strict requirement for bio pages:
- They should all have the same mapping
(the mapping check is already implied by the call chain)
- Their logical bytenr should be adjacent
This is the same as the old condition.
- Their page_offset() (file offset) should be adjacent
This is the new check.
This would result a slightly increased amount of bios from btrfs
(needs holes and inside the same stripe boundary to trigger).
But this would greatly reduce the confusion, as it's pretty common
to assume a btrfs bio would only contain continuous page cache.
Later we may need extra cleanups, as we no longer needs to handle gaps
between page offsets in endio functions.
Currently this should be the minimal patch to fix commit 7aa51232e2
("btrfs: pass a btrfs_bio to btrfs_repair_one_sector").
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes: 7aa51232e2 ("btrfs: pass a btrfs_bio to btrfs_repair_one_sector")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When punching a hole into a file range that is adjacent with a hole and we
are not using the no-holes feature, we expand the range of the adjacent
file extent item that represents a hole, to save metadata space.
However we don't update the generation of hole file extent item, which
means a full fsync will not log that file extent item if the fsync happens
in a later transaction (since commit 7f30c07288 ("btrfs: stop copying
old file extents when doing a full fsync")).
For example, if we do this:
$ mkfs.btrfs -f -O ^no-holes /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 2M 2M" /mnt/foobar
$ sync
We end up with 2 file extent items in our file:
1) One that represents the hole for the file range [0, 2M), with a
generation of 7;
2) Another one that represents an extent covering the range [2M, 4M).
After that if we do the following:
$ xfs_io -c "fpunch 2M 2M" /mnt/foobar
We end up with a single file extent item in the file, which represents a
hole for the range [0, 4M) and with a generation of 7 - because we end
dropping the data extent for range [2M, 4M) and then update the file
extent item that represented the hole at [0, 2M), by increasing
length from 2M to 4M.
Then doing a full fsync and power failing:
$ xfs_io -c "fsync" /mnt/foobar
<power failure>
will result in the full fsync not logging the file extent item that
represents the hole for the range [0, 4M), because its generation is 7,
which is lower than the generation of the current transaction (8).
As a consequence, after mounting again the filesystem (after log replay),
the region [2M, 4M) does not have a hole, it still points to the
previous data extent.
So fix this by always updating the generation of existing file extent
items representing holes when we merge/expand them. This solves the
problem and it's the same approach as when we merge prealloc extents that
got written (at btrfs_mark_extent_written()). Setting the generation to
the current transaction's generation is also what we do when merging
the new hole extent map with the previous one or the next one.
A test case for fstests, covering both cases of hole file extent item
merging (to the left and to the right), will be sent soon.
Fixes: 7f30c07288 ("btrfs: stop copying old file extents when doing a full fsync")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if
the path is invalid. In this case, btrfs_get_dev_args_from_path()
returns directly without freeing args->uuid and args->fsid allocated
before, which causes memory leak.
To fix these possible leaks, when btrfs_get_bdev_and_sb() fails,
btrfs_put_dev_args_from_path() is called to clean up the memory.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Fixes: faa775c41d ("btrfs: add a btrfs_get_dev_args_from_path helper")
CC: stable@vger.kernel.org # 5.16
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a filesystem which has btrfs read-only property set to true, all
write operations including xattr should be denied. However, security
xattr can still be changed even if btrfs ro property is true.
This happens because xattr_permission() does not have any restrictions
on security.*, system.* and in some cases trusted.* from VFS and
the decision is left to the underlying filesystem. See comments in
xattr_permission() for more details.
This patch checks if the root is read-only before performing the set
xattr operation.
Testcase:
DEV=/dev/vdb
MNT=/mnt
mkfs.btrfs -f $DEV
mount $DEV $MNT
echo "file one" > $MNT/f1
setfattr -n "security.one" -v 2 $MNT/f1
btrfs property set /mnt ro true
setfattr -n "security.one" -v 1 $MNT/f1
umount $MNT
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=HgV0
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few short fixes and a lockdep warning fix (needs moving some code):
- tree-log replay fixes:
- fix error handling when looking up extent refs
- fix warning when setting inode number of links
- relocation fixes:
- reset block group read-only status when relocation fails
- unset control structure if transaction fails when starting
to process a block group
- add lockdep annotations to fix a warning during relocation
where blocks temporarily belong to another tree and can lead
to reversed dependencies
- tree-checker verifies that extent items don't overlap"
* tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: check for overlapping extent items
btrfs: fix warning during log replay when bumping inode link count
btrfs: fix lost error handling when looking up extended ref on log replay
btrfs: fix lockdep splat with reloc root extent buffers
btrfs: move lockdep class helpers to locking.c
btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
btrfs: reset RO counter on block group if we fail to relocate
We're seeing a weird problem in production where we have overlapping
extent items in the extent tree. It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem. Add a check to the tree-checker to make sure
that the extents do not overlap each other.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay, when processing inode references, if we get an error
when looking up for an extended reference at __add_inode_ref(), we ignore
it and proceed, returning success (0) if no other error happens after the
lookup. This is obviously wrong because in case an extended reference
exists and it encodes some name not in the log, we need to unlink it,
otherwise the filesystem state will not match the state it had after the
last fsync.
So just make __add_inode_ref() return an error it gets from the extended
reference lookup.
Fixes: f186373fef ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been hitting the following lockdep splat with btrfs/187 recently
WARNING: possible circular locking dependency detected
5.19.0-rc8+ #775 Not tainted
------------------------------------------------------
btrfs/752500 is trying to acquire lock:
ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
but task is already holding lock:
ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-tree-01/1){+.+.}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_init_new_buffer+0x7d/0x2c0
btrfs_alloc_tree_block+0x120/0x3b0
__btrfs_cow_block+0x136/0x600
btrfs_cow_block+0x10b/0x230
btrfs_search_slot+0x53b/0xb70
btrfs_lookup_inode+0x2a/0xa0
__btrfs_update_delayed_inode+0x5f/0x280
btrfs_async_run_delayed_root+0x24c/0x290
btrfs_work_helper+0xf2/0x3e0
process_one_work+0x271/0x590
worker_thread+0x52/0x3b0
kthread+0xf0/0x120
ret_from_fork+0x1f/0x30
-> #1 (btrfs-tree-01){++++}-{3:3}:
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_search_slot+0x3c3/0xb70
do_relocation+0x10c/0x6b0
relocate_tree_blocks+0x317/0x6d0
relocate_block_group+0x1f1/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #0 (btrfs-treloc-02#2){+.+.}-{3:3}:
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
down_write_nested+0x41/0x80
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Chain exists of:
btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-tree-01/1);
lock(btrfs-tree-01);
lock(btrfs-tree-01/1);
lock(btrfs-treloc-02#2);
*** DEADLOCK ***
7 locks held by btrfs/752500:
#0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90
#1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40
#2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400
#3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610
#4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0
#6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110
stack backtrace:
CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x56/0x73
check_noncircular+0xd6/0x100
? lock_is_held_type+0xe2/0x140
__lock_acquire+0x1122/0x1e10
lock_acquire+0xc2/0x2d0
? __btrfs_tree_lock+0x24/0x110
down_write_nested+0x41/0x80
? __btrfs_tree_lock+0x24/0x110
__btrfs_tree_lock+0x24/0x110
btrfs_lock_root_node+0x31/0x50
btrfs_search_slot+0x1cb/0xb70
? lock_release+0x137/0x2d0
? _raw_spin_unlock+0x29/0x50
? release_extent_buffer+0x128/0x180
replace_path+0x541/0x9f0
merge_reloc_root+0x1d6/0x610
merge_reloc_roots+0xe2/0x260
relocate_block_group+0x2c8/0x560
btrfs_relocate_block_group+0x23e/0x400
btrfs_relocate_chunk+0x4c/0x140
btrfs_balance+0x755/0xe40
btrfs_ioctl+0x1ea2/0x2c90
? lock_is_held_type+0xe2/0x140
? lock_is_held_type+0xe2/0x140
? __x64_sys_ioctl+0x88/0xc0
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This isn't necessarily new, it's just tricky to hit in practice. There
are two competing things going on here. With relocation we create a
snapshot of every fs tree with a reloc tree. Any extent buffers that
get initialized here are initialized with the reloc root lockdep key.
However since it is a snapshot, any blocks that are currently in cache
that originally belonged to the fs tree will have the normal tree
lockdep key set. This creates the lock dependency of
reloc tree -> normal tree
for the extent buffer locking during the first phase of the relocation
as we walk down the reloc root to relocate blocks.
However this is problematic because the final phase of the relocation is
merging the reloc root into the original fs root. This involves
searching down to any keys that exist in the original fs root and then
swapping the relocated block and the original fs root block. We have to
search down to the fs root first, and then go search the reloc root for
the block we need to replace. This creates the dependency of
normal tree -> reloc tree
which is why lockdep complains.
Additionally even if we were to fix this particular mismatch with a
different nesting for the merge case, we're still slotting in a block
that has a owner of the reloc root objectid into a normal tree, so that
block will have its lockdep key set to the tree reloc root, and create a
lockdep splat later on when we wander into that block from the fs root.
Unfortunately the only solution here is to make sure we do not set the
lockdep key to the reloc tree lockdep key normally, and then reset any
blocks we wander into from the reloc root when we're doing the merged.
This solves the problem of having mixed tree reloc keys intermixed with
normal tree keys, and then allows us to make sure in the merge case we
maintain the lock order of
normal tree -> reloc tree
We handle this by setting a bit on the reloc root when we do the search
for the block we want to relocate, and any block we search into or COW
at that point gets set to the reloc tree key. This works correctly
because we only ever COW down to the parent node, so we aren't resetting
the key for the block we're linking into the fs root.
With this patch we no longer have the lockdep splat in btrfs/187.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These definitions exist in disk-io.c, which is not related to the
locking. Move this over to locking.h/c where it makes more sense.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_relocate_block_group(), the rc is allocated. Then
btrfs_relocate_block_group() calls
relocate_block_group()
prepare_to_relocate()
set_reloc_control()
that assigns rc to the variable fs_info->reloc_ctl. When
prepare_to_relocate() returns, it calls
btrfs_commit_transaction()
btrfs_start_dirty_block_groups()
btrfs_alloc_path()
kmem_cache_zalloc()
which may fail for example (or other errors could happen). When the
failure occurs, btrfs_relocate_block_group() detects the error and frees
rc and doesn't set fs_info->reloc_ctl to NULL. After that, in
btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and
then used, which may cause a use-after-free bug.
This possible bug can be triggered by calling btrfs_ioctl_balance()
before calling btrfs_ioctl_defrag().
To fix this possible bug, in prepare_to_relocate(), check if
btrfs_commit_transaction() fails. If the failure occurs,
unset_reloc_control() is called to set fs_info->reloc_ctl to NULL.
The error log in our fault-injection testing is shown as follows:
[ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
...
[ 58.753577] Call Trace:
...
[ 58.755800] kasan_report+0x45/0x60
[ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs]
[ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs]
[ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs]
[ 58.758231] start_transaction+0x896/0x2950 [btrfs]
[ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs]
[ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs]
[ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs]
...
[ 58.768510] Allocated by task 23683:
[ 58.768777] ____kasan_kmalloc+0xb5/0xf0
[ 58.769069] __kmalloc+0x227/0x3d0
[ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs]
[ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs]
[ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
[ 58.773337] Freed by task 23683:
...
[ 58.774815] kfree+0xda/0x2b0
[ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs]
[ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs]
[ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs]
[ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs]
[ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs]
[ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs]
[ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs]
...
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmLnyNUACgkQxWXV+ddt
WDt9vA/9HcF+v5EkknyW07tatTap/Hm/ZB86Z5OZi6ikwIEcHsWhp3rUICejm88e
GecDPIluDtCtyD6x4stuqkwOm22aDP5q2T9H6+gyw92ozyb436OV1Z8IrmftzXKY
EpZO70PHZT+E6E/WYvyoTmmoCrjib7YlqCWZZhSLUFpsqqlOInmHEH49PW6KvM4r
acUZ/RxHurKdmI3kNY6ECbAQl6CASvtTdYcVCx8fT2zN0azoLIQxpYa7n/9ca1R6
8WnYilCbLbNGtcUXvO2M3tMZ4/5kvxrwQsUn93ccCJYuiN0ASiDXbLZ2g4LZ+n56
JGu+y5v5oBwjpVf+46cuvnENP5BQ61594WPseiVjrqODWnPjN28XkcVC0XmPsiiZ
lszeHO2cuIrIFoCah8ELMl8usu8+qxfXmPxIXtPu9rEyKsDtOjxVYc8SMXqLp0qQ
qYtBoFm0JcZHqtZRpB+dhQ37/xXtH4ljUi/mI6x8iALVujeR273URs7yO9zgIdeW
uZoFtbwpHFLUk+TL7Ku82/zOXp3fCwtDpNmlYbxeMbea/be3ShjncM4+mYzvHYri
dYON2LFrq+mnRDqtIXTCaAYwX7zU8Y18Ev9QwlNll8dKlKwS89+jpqLoa+eVYy3c
/HitHFza70KxmOj4dvDVZlzDpPvl7kW1UBkmskg4u3jnNWzedkM=
=sS1q
-----END PGP SIGNATURE-----
Merge tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings some long awaited changes, the send protocol bump,
otherwise lots of small improvements and fixes. The main core part is
reworking bio handling, cleaning up the submission and endio and
improving error handling.
There are some changes outside of btrfs adding helpers or updating
API, listed at the end of the changelog.
Features:
- sysfs:
- export chunk size, in debug mode add tunable for setting its size
- show zoned among features (was only in debug mode)
- show commit stats (number, last/max/total duration)
- send protocol updated to 2
- new commands:
- ability write larger data chunks than 64K
- send raw compressed extents (uses the encoded data ioctls),
ie. no decompression on send side, no compression needed on
receive side if supported
- send 'otime' (inode creation time) among other timestamps
- send file attributes (a.k.a file flags and xflags)
- this is first version bump, backward compatibility on send and
receive side is provided
- there are still some known and wanted commands that will be
implemented in the near future, another version bump will be
needed, however we want to minimize that to avoid causing
usability issues
- print checksum type and implementation at mount time
- don't print some messages at mount (mentioned as people asked about
it), we want to print messages namely for new features so let's
make some space for that
- big metadata - this has been supported for a long time and is
not a feature that's worth mentioning
- skinny metadata - same reason, set by default by mkfs
Performance improvements:
- reduced amount of reserved metadata for delayed items
- when inserted items can be batched into one leaf
- when deleting batched directory index items
- when deleting delayed items used for deletion
- overall improved count of files/sec, decreased subvolume lock
contention
- metadata item access bounds checker micro-optimized, with a few
percent of improved runtime for metadata-heavy operations
- increase direct io limit for read to 256 sectors, improved
throughput by 3x on sample workload
Notable fixes:
- raid56
- reduce parity writes, skip sectors of stripe when there are no
data updates
- restore reading from on-disk data instead of using stripe cache,
this reduces chances to damage correct data due to RMW cycle
- refuse to replay log with unknown incompat read-only feature bit
set
- zoned
- fix page locking when COW fails in the middle of allocation
- improved tracking of active zones, ZNS drives may limit the
number and there are ENOSPC errors due to that limit and not
actual lack of space
- adjust maximum extent size for zone append so it does not cause
late ENOSPC due to underreservation
- mirror reading error messages show the mirror number
- don't fallback to buffered IO for NOWAIT direct IO writes, we don't
have the NOWAIT semantics for buffered io yet
- send, fix sending link commands for existing file paths when there
are deleted and created hardlinks for same files
- repair all mirrors for profiles with more than 1 copy (raid1c34)
- fix repair of compressed extents, unify where error detection and
repair happen
Core changes:
- bio completion cleanups
- don't double defer compression bios
- simplify endio workqueues
- add more data to btrfs_bio to avoid allocation for read requests
- rework bio error handling so it's same what block layer does,
the submission works and errors are consumed in endio
- when asynchronous bio offload fails fall back to synchronous
checksum calculation to avoid errors under writeback or memory
pressure
- new trace points
- raid56 events
- ordered extent operations
- super block log_root_transid deprecated (never used)
- mixed_backref and big_metadata sysfs feature files removed, they've
been default for sufficiently long time, there are no known users
and mixed_backref could be confused with mixed_groups
Non-btrfs changes, API updates:
- minor highmem API update to cover const arguments
- switch all kmap/kmap_atomic to kmap_local
- remove redundant flush_dcache_page()
- address_space_operations::writepage callback removed
- add bdev_max_segments() helper"
* tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits)
btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read
btrfs: fix repair of compressed extents
btrfs: remove the start argument to check_data_csum and export
btrfs: pass a btrfs_bio to btrfs_repair_one_sector
btrfs: simplify the pending I/O counting in struct compressed_bio
btrfs: repair all known bad mirrors
btrfs: merge btrfs_dev_stat_print_on_error with its only caller
btrfs: join running log transaction when logging new name
btrfs: simplify error handling in btrfs_lookup_dentry
btrfs: send: always use the rbtree based inode ref management infrastructure
btrfs: send: fix sending link commands for existing file paths
btrfs: send: introduce recorded_ref_alloc and recorded_ref_free
btrfs: zoned: wait until zone is finished when allocation didn't progress
btrfs: zoned: write out partially allocated region
btrfs: zoned: activate necessary block group
btrfs: zoned: activate metadata block group on flush_space
btrfs: zoned: disable metadata overcommit for zoned
btrfs: zoned: introduce space_info->active_total_bytes
btrfs: zoned: finish least available block group on data bg allocation
btrfs: let can_allocate_chunk return error
...
