mirror of
https://github.com/torvalds/linux
synced 2024-09-06 18:01:05 +00:00
7996 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
7361d1bc30 |
lib/mpi: Fix buffer overrun when SG is too long
The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes. However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.
Fixes:
|
||
![]() |
e20d5a22bd |
crypto: lib/blake2s - Split up test function to halve stack usage
Reduce the stack usage further by splitting up the test function. Also squash blocks and unaligned_blocks into one array. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
c5651b31f5 |
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
Add a test to the maple tree test suite for the spanning rebalance
insufficient node issue does not go undetected again.
Link: https://lkml.kernel.org/r/20221219161922.2708732-3-Liam.Howlett@oracle.com
Fixes:
|
||
![]() |
0abb964aae |
maple_tree: fix mas_spanning_rebalance() on insufficient data
Mike Rapoport contacted me off-list with a regression in running criu.
Periodic tests fail with an RCU stall during execution. Although rare, it
is possible to hit this with other uses so this patch should be backported
to fix the regression.
This patchset adds the fix and a test case to the maple tree test
suite.
This patch (of 2):
An insufficient node was causing an out-of-bounds access on the node in
mas_leaf_max_gap(). The cause was the faulty detection of the new node
being a root node when overwriting many entries at the end of the tree.
Fix the detection of a new root and ensure there is sufficient data prior
to entering the spanning rebalance loop.
Link: https://lkml.kernel.org/r/20221219161922.2708732-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221219161922.2708732-2-Liam.Howlett@oracle.com
Fixes:
|
||
![]() |
32d528c4b8 |
SPDX/License additions for 6.2-rc1
Here are 2 small updates for LICENSES and some kernel files that add the Copyleft-next license and use it in a SPDX tag as a dual-license for some kernel files. These have been discussed thoroughly in public on the linux-spdx mailing list, and have the needed acks on them, as well as having been in linux-next with no reported issues for quite some time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY6F1Qg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynGWwCfVJ+Z1CVWSFC8KaaGNiFu/gXmgNUAoKy11gWJ 8igpSNEkOiGiaGA+AvN+ =j8iu -----END PGP SIGNATURE----- Merge tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX/License additions from Greg KH: "Here are two small updates for LICENSES and some kernel files that add the Copyleft-next license and use it in a SPDX tag as a dual-license for some kernel files. These have been discussed thoroughly in public on the linux-spdx mailing list, and have the needed acks on them, as well as having been in linux-next with no reported issues for quite some time" * tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: testing: use the copyleft-next-0.3.1 SPDX tag LICENSES: Add the copyleft-next-0.3.1 license |
||
![]() |
70b07bec95 |
asm-generic bits for 6.2
There are only three fairly simple patches. The #include change to linux/swab.h addresses a userspace build issue, and the change to the mmio tracing logic helps provide more useful traces. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmOgtJUACgkQmmx57+YA GNln8Q//dvQ2FRIWBXKh4r6CxtiCx2aktGmnP1YAuaIVuzjGSn/8EQZAoTYN5jKY Io8rFt1/FfOMtu3E32JtGpgfDAP/8sfz3Lao9bzJR/Fjv059qL5QCoI3qbEFTNz9 vzUqiddFZGppn76qsXSA6aItHVDS4Y97XiYRSwSMlpIz+9a84rYxCo04bNR4ut4t PR5+lvlTDfGfmj+SebrCt/IEi/FF9ckEYCLJHfaSPcQcujLDZDKPcT2RbubgwHgB OfE5Rx25xJxR4BU5MFe74sKn5Qi5HOfr1GrsjL3RbMNiYuHgbwLcZkMXvbZukdHz 50Gt8UXMAxvZYKz92kyQLYuiKEtFSrQ8JccgqVUWL/lRLDoUkTg4hz4tmGUZE6KP ElxdgIBem9yrFX0oCaPNkY5d3MRU2i19FvBfKWKC54NbcmBjpHxxSg+WW/P7Jw+N uegj7qcEh7RcQU4w97OW4nS+eZmnXb4O4qXZeFwhXHS/snH7p3iBApyoPlyb+KOs np5MWRNaGFfi8BWWeVTX78U2VW8Ql8nnlRIlk/Wwm8AkVaNFQDnffKPi87paZd9o Kl+a9broMf4v0Oq5JTxqPMzmn9zUV0rHa1VanRBnNKqTOWalmNcsfsg1Ih9PhAAT p3u2CN0cBI7QmrcymJHrCuv0eNJRjsYa5FB4xmhJcJkD2qjsqXI= =05F5 -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are only three fairly simple patches. The #include change to linux/swab.h addresses a userspace build issue, and the change to the mmio tracing logic helps provide more useful traces" * tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info include/uapi/linux/swab: Fix potentially missing __always_inline |
||
![]() |
6feb57c2fd |
Kbuild updates for v6.2
- Support zstd-compressed debug info - Allow W=1 builds to detect objects shared among multiple modules - Add srcrpm-pkg target to generate a source RPM package - Make the -s option detection work for future GNU Make versions - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y - Allow W=1 builds to detect -Wundef warnings in any preprocessed files - Raise the minimum supported version of binutils to 2.25 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used - Use $(file ...) to read a file if GNU Make >= 4.2 is used - Print error if GNU Make older than 3.82 is used - Allow modpost to detect section mismatches with Clang LTO - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmOeImsVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsG06IP/iVjuWFvnjDZT4X8X6zN8aKp1vtR EMkmoRtt5cD4CLb1MG4N7irYHgedQSx4rYceP45MyW1I3egl6Ct14RDyeQ1xSIZb XFTLDCZvfl/up3MdiqNAqKRS7x5lk9++7F0t+2SoQxKQyJvm735XreX+VhZ1FeLB qcHrmzJ5veky5Ry/3OkNUgKFBjKEAL+qKMc55uvkXqfTb3KoBa2r4VC1OaoYGRru R8oF9qQRnGVQAl/LbBVchmgSjxryxPrCvBGiKlK03VkXdzEMHMimEJh3BQ6e0PGo gajdk+4liy7z+jQnI7jFhvJjGKzkEP/Bc99M/uS92QX5MgpH6mqpHMoqqPiqW87K RmZH37FqRu1Vo8dpibmH6r2K6YD/HHRjaDHk1VuuCQYEn0dsNmokPXOqd/1v0I1i TXPjWOw1AID5vMJWllqxFhpeVvf0vx5BT/UNrh68MLqlJZzv2eMVJb4fNy6640ml U0NclMnOa3eOmf5z1T7/LqDRTa63Q0kpanRrBpcmVOaqW+ZpQ3SQjh4uBN1PyJHL cX3Skc341DyRlFiT54QhGKlm57MEb2gjhBZ3Z4J+b7sEFgvjXH/W8vcOGIKlppmA CfYMyres4OV+fJc89ONkWsvLiOP1OeUGPvytm33J5QMKXc8SzOLP0D/F8kjrDflm EROKuZ4EA5ej/rOy =Ig/Y -----END PGP SIGNATURE----- Merge tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support zstd-compressed debug info - Allow W=1 builds to detect objects shared among multiple modules - Add srcrpm-pkg target to generate a source RPM package - Make the -s option detection work for future GNU Make versions - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y - Allow W=1 builds to detect -Wundef warnings in any preprocessed files - Raise the minimum supported version of binutils to 2.25 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used - Use $(file ...) to read a file if GNU Make >= 4.2 is used - Print error if GNU Make older than 3.82 is used - Allow modpost to detect section mismatches with Clang LTO - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y * tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) buildtar: fix tarballs with EFI_ZBOOT enabled modpost: Include '.text.*' in TEXT_SECTIONS padata: Mark padata_work_init() as __ref kbuild: ensure Make >= 3.82 is used kbuild: refactor the prerequisites of the modpost rule kbuild: change module.order to list *.o instead of *.ko kbuild: use .NOTINTERMEDIATE for future GNU Make versions kconfig: refactor Makefile to reduce process forks kbuild: add read-file macro kbuild: do not sort after reading modules.order kbuild: add test-{ge,gt,le,lt} macros Documentation: raise minimum supported version of binutils to 2.25 kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS kbuild: Port silent mode detection to future gnu make. init/version.c: remove #include <generated/utsrelease.h> firmware_loader: remove #include <generated/utsrelease.h> modpost: Mark uuid_le type to be suitable only for MEI kbuild: add ability to make source rpm buildable using koji kbuild: warn objects shared among multiple modules ... |
||
![]() |
158738ea75 |
Update to zstd-1.5.2
The major goal of this PR is to update the kernel to upstream zstd v1.5.2 [0]. Specifically to the tag v1.5.2-kernel [1] which includes several cherrypicked fixes for the kernel on top of v1.5.2. Excepting the MAINTAINERS change, all the changes in this PR can be generated by: ``` git clone https://github.com/facebook/zstd cd zstd/contrib/linux-kernel git checkout v1.5.2-kernel LINUX=/path/to/linux/repo make import ``` These changes have been baking in linux-next since 2022/10/24 when I put up my patchset [2]. Notably the first commit is a small refactor of the only zstd commit since the last update [3] to fit the upstream import scheme. Additionally, this PR includes several minor typo fixes, which have all been fixed upstream so they are maintained on the next import. [0] https://github.com/facebook/zstd/releases/tag/v1.5.2 [1] https://github.com/facebook/zstd/tree/v1.5.2-kernel [2] https://lore.kernel.org/lkml/20221024202606.404049-1-nickrterrell@gmail.com/ [3] |
||
![]() |
a6e3e6f138 |
Some fault-injection improvements from Wei Yongjun which enable stacktrace
filtering on x86_64. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY56YjgAKCRDdBJ7gKXxA jni0AQCXYCZE1pOVXnB+IA1G1xkM0f1xDS/D63uJVl7Lyurv5QEAvJWX25DsTbLR c0bq3y2PPpHzrcDyPhciVlY/iplHQQM= =tfs8 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull fault-injection updates from Andrew Morton: "Some fault-injection improvements from Wei Yongjun which enable stacktrace filtering on x86_64" * tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fault-injection: make stacktrace filter works as expected fault-injection: make some stack filter attrs more readable fault-injection: skip stacktrace filtering by default fault-injection: allow stacktrace filter for x86-64 |
||
![]() |
1ea9d333ba |
- A few late-breaking minor fixups
- Two minor feature patches which were awkwardly dependent on mm-nonmm. I need to set up a new branch to handle such things. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY56V1wAKCRDdBJ7gKXxA juVQAP9pr5XBx880RJEil6skMCxYJmae8LvYShhvxJi9keot7QEA3wZRlGcllw/3 fiHcsaBlXqtXBWUbtnMezcdP6gb3TQo= =8T1p -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more mm updates from Andrew Morton: - A few late-breaking minor fixups - Two minor feature patches which were awkwardly dependent on mm-nonmm. I need to set up a new branch to handle such things. * tag 'mm-stable-2022-12-17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: MAINTAINERS: zram: zsmalloc: Add an additional co-maintainer mm/kmemleak: use %pK to display kernel pointers in backtrace mm: use stack_depot for recording kmemleak's backtrace maple_tree: update copyright dates for test code maple_tree: fix mas_find_rev() comment mm/gup_test: free memory allocated via kvcalloc() using kvfree() |
||
![]() |
71a7507afb |
Driver Core changes for 6.2-rc1
Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems, OTHER than some merge issues with other trees that should be obvious when you hit them (block tree deletes a driver that this tree modifies, iommufd tree modifies code that this tree also touches). If there are merge problems with these trees, please let me know. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe 1Fp53boFaQkGBjl8mGF8 =v+FB -----END PGP SIGNATURE----- Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ... |
||
![]() |
ba54ff1fb6 |
Char/Misc driver changes for 6.2-rc1
Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wrdw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykSDgCdHjUHS62/UnKdB9rLtyAOFxS/6DgAn2X4Unf8 RN8Mn2mUIiBzyu5p+Zc7 =tK3S -----END PGP SIGNATURE----- Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits) extcon: usbc-tusb320: Convert to i2c's .probe_new() extcon: rt8973: Convert to i2c's .probe_new() extcon: fsa9480: Convert to i2c's .probe_new() extcon: max77843: Replace irqchip mask_invert with unmask_base chardev: fix error handling in cdev_device_add() mcb: mcb-parse: fix error handing in chameleon_parse_gdd() drivers: mcb: fix resource leak in mcb_probe() coresight: etm4x: fix repeated words in comments coresight: cti: Fix null pointer error on CTI init before ETM coresight: trbe: remove cpuhp instance node before remove cpuhp state counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update misc: fastrpc: Add dma_mask to fastrpc_channel_ctx misc: fastrpc: Add mmap request assigning for static PD pool misc: fastrpc: Safekeep mmaps on interrupted invoke misc: fastrpc: Add support for audiopd misc: fastrpc: Rework fastrpc_req_munmap misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail misc: fastrpc: Add fastrpc_remote_heap_alloc misc: fastrpc: Add reserved mem support misc: fastrpc: Rename audio protection domain to root ... |
||
![]() |
f9eeef5918 |
fault-injection: make stacktrace filter works as expected
stacktrace filter is checked after others, such as fail-nth, interval and probability. This make it doesn't work well as expected. Fix to running stacktrace filter before other filters. It will speed up fault inject testing for driver modules. Link: https://lkml.kernel.org/r/20220817080332.1052710-5-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
0199907474 |
fault-injection: make some stack filter attrs more readable
Attributes of stack filter are show as unsigned decimal, such as 'require-start', 'require-end'. This patch change to show them as unsigned hexadecimal for more readable. Before: $ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start $ cat /sys/kernel/debug/failslab/require-start 18446744072638263296 After: $ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start $ cat /sys/kernel/debug/failslab/require-start 0xffffffffc0257000 [wangyufen@huawei.com: use debugfs_create_xul() instead of debugfs_create_xl()] Link: https://lkml.kernel.org/r/1664331299-4976-1-git-send-email-wangyufen@huawei.com Link: https://lkml.kernel.org/r/20220817080332.1052710-4-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
4acb9e5139 |
fault-injection: skip stacktrace filtering by default
If FAULT_INJECTION_STACKTRACE_FILTER is enabled, the depth is default to 32. This means fail_stacktrace() will iter each entry's stacktrace, even if filter is not configured. This patch changes to quick return from fail_stacktrace() if stacktrace filter is not set. Link: https://lkml.kernel.org/r/20220817080332.1052710-3-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
a7ebbbb159 |
fault-injection: allow stacktrace filter for x86-64
This patchset allow fault injection to run on x86_64 and makes stacktrace
filter work as expected. With this, we can test a device driver module
with fault injection more easily.
This patch (of 4):
FAULT_INJECTION_STACKTRACE_FILTER option was apparently disallowed on
x86_64 because of problems with the stack unwinder:
commit
|
||
![]() |
56a61617dd |
mm: use stack_depot for recording kmemleak's backtrace
Using stack_depot to record kmemleak's backtrace which has been implemented on slub for reducing redundant information. [akpm@linux-foundation.org: fix build - remove now-unused __save_stack_trace()] [zhaoyang.huang@unisoc.com: v3] Link: https://lkml.kernel.org/r/1667101354-4669-1-git-send-email-zhaoyang.huang@unisoc.com [akpm@linux-foundation.org: fix v3 layout oddities] [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/1666864224-27541-1-git-send-email-zhaoyang.huang@unisoc.com Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: ke.wang <ke.wang@unisoc.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhaoyang Huang <huangzhaoyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
d98c86b9f7 |
maple_tree: fix mas_find_rev() comment
mas_find_rev() uses mas_prev_entry(), not mas_next_entry(), correct comment. Link: https://lkml.kernel.org/r/20221025173756.2719616-1-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
94a855111e |
- Add the call depth tracking mitigation for Retbleed which has
been long in the making. It is a lighterweight software-only fix for Skylake-based cores where enabling IBRS is a big hammer and causes a significant performance impact. What it basically does is, it aligns all kernel functions to 16 bytes boundary and adds a 16-byte padding before the function, objtool collects all functions' locations and when the mitigation gets applied, it patches a call accounting thunk which is used to track the call depth of the stack at any time. When that call depth reaches a magical, microarchitecture-specific value for the Return Stack Buffer, the code stuffs that RSB and avoids its underflow which could otherwise lead to the Intel variant of Retbleed. This software-only solution brings a lot of the lost performance back, as benchmarks suggest: https://lore.kernel.org/all/20220915111039.092790446@infradead.org/ That page above also contains a lot more detailed explanation of the whole mechanism - Implement a new control flow integrity scheme called FineIBT which is based on the software kCFI implementation and uses hardware IBT support where present to annotate and track indirect branches using a hash to validate them - Other misc fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOZp5EACgkQEsHwGGHe VUrZFxAAvi/+8L0IYSK4mKJvixGbTFjxN/Swo2JVOfs34LqGUT6JaBc+VUMwZxdb VMTFIZ3ttkKEodjhxGI7oGev6V8UfhI37SmO2lYKXpQVjXXnMlv/M+Vw3teE38CN gopi+xtGnT1IeWQ3tc/Tv18pleJ0mh5HKWiW+9KoqgXj0wgF9x4eRYDz1TDCDA/A iaBzs56j8m/FSykZHnrWZ/MvjKNPdGlfJASUCPeTM2dcrXQGJ93+X2hJctzDte0y Nuiw6Y0htfFBE7xoJn+sqm5Okr+McoUM18/CCprbgSKYk18iMYm3ZtAi6FUQZS1A ua4wQCf49loGp15PO61AS5d3OBf5D3q/WihQRbCaJvTVgPp9sWYnWwtcVUuhMllh ZQtBU9REcVJ/22bH09Q9CjBW0VpKpXHveqQdqRDViLJ6v/iI6EFGmD24SW/VxyRd 73k9MBGrL/dOf1SbEzdsnvcSB3LGzp0Om8o/KzJWOomrVKjBCJy16bwTEsCZEJmP i406m92GPXeaN1GhTko7vmF0GnkEdJs1GVCZPluCAxxbhHukyxHnrjlQjI4vC80n Ylc0B3Kvitw7LGJsPqu+/jfNHADC/zhx1qz/30wb5cFmFbN1aRdp3pm8JYUkn+l/ zri2Y6+O89gvE/9/xUhMohzHsWUO7xITiBavewKeTP9GSWybWUs= =cRy1 -----END PGP SIGNATURE----- Merge tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Add the call depth tracking mitigation for Retbleed which has been long in the making. It is a lighterweight software-only fix for Skylake-based cores where enabling IBRS is a big hammer and causes a significant performance impact. What it basically does is, it aligns all kernel functions to 16 bytes boundary and adds a 16-byte padding before the function, objtool collects all functions' locations and when the mitigation gets applied, it patches a call accounting thunk which is used to track the call depth of the stack at any time. When that call depth reaches a magical, microarchitecture-specific value for the Return Stack Buffer, the code stuffs that RSB and avoids its underflow which could otherwise lead to the Intel variant of Retbleed. This software-only solution brings a lot of the lost performance back, as benchmarks suggest: https://lore.kernel.org/all/20220915111039.092790446@infradead.org/ That page above also contains a lot more detailed explanation of the whole mechanism - Implement a new control flow integrity scheme called FineIBT which is based on the software kCFI implementation and uses hardware IBT support where present to annotate and track indirect branches using a hash to validate them - Other misc fixes and cleanups * tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) x86/paravirt: Use common macro for creating simple asm paravirt functions x86/paravirt: Remove clobber bitmask from .parainstructions x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit x86/Kconfig: Enable kernel IBT by default x86,pm: Force out-of-line memcpy() objtool: Fix weak hole vs prefix symbol objtool: Optimize elf_dirty_reloc_sym() x86/cfi: Add boot time hash randomization x86/cfi: Boot time selection of CFI scheme x86/ibt: Implement FineIBT objtool: Add --cfi to generate the .cfi_sites section x86: Add prefix symbols for function padding objtool: Add option to generate prefix symbols objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf objtool: Slice up elf_create_section_symbol() kallsyms: Revert "Take callthunks into account" x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces x86/retpoline: Fix crash printing warning x86/paravirt: Fix a !PARAVIRT build warning ... |
||
![]() |
64e7003c6b |
This update includes the following changes:
API: - Optimise away self-test overhead when they are disabled. - Support symmetric encryption via keyring keys in af_alg. - Flip hwrng default_quality, the default is now maximum entropy. Algorithms: - Add library version of aesgcm. - CFI fixes for assembly code. - Add arm/arm64 accelerated versions of sm3/sm4. Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned. - Fix selftest failures in rockchip. - Add support for RK3328/RK3399 in rockchip. - Add deflate support in qat. - Merge ux500 into stm32. - Add support for TEE for PCI ID 0x14CA in ccp. - Add mt7986 support in mtk. - Add MaxLinear platform support in inside-secure. - Add NPCM8XX support in npcm. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmOZhNQACgkQxycdCkmx i6edOQ/+IHYe2Z+fLsMGs0qgTVaEV33O0crTRl/PMkfBJai57grz6x/G9QrkwGHS 084u4RmwhVrE7Z/pxvey48m0lHMw3H/ElLTRl5LV1zE2OtGgr4VV63wtqthu1QS1 KblVnjb52DhFhvF1O1IrK9lxyX0lByOiARFVdyZR6+Rb66Xfq8rqk5t8U8mmTUFz ds9S2Un4HajgtjNEyI78DOX8o4wVST8tltQs0eVii6T9AeXgSgX37ytD7Xtg/zrz /p61KFgKBQkRT7EEGD6xgNrND0vNAp2w98ZTTRXTZI8+Y0aTUcTYya7cXOLBt9bQ rA7z9sNKvmwJijTMV6O9eqRGcYfzc2G4qfMhlQqj/P2pjLnEZXdvFNHTTbclR76h 2UFlZXPDQVQukvnNNnB6bmIvv6DsM+jmGH0pK5BnBJXnD5SOZh1RqjJxw0Kj6QCM VxpKDvfStux2Guh6mz1lJna/S44qKy/sVYkWUawcmE4RF2+GfNayM1GUpEUofndE vz1yZdgLPETSh5QzKrjFkUAnqo/AsAdc5Qxroz9DRz1BCC0GCuIxjUG8ScTWgcth R/reQDczBckCNpPxrWPHHYoVXnAMwEFySfcjZyuCoMO6t6qVUvcjRShCyKwO/JPl 9YREdRmq0swwIB9cFIrEoWrzc3wjjBtsltDFlkKsa9c92LXoW+g= =OpWt -----END PGP SIGNATURE----- Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Optimise away self-test overhead when they are disabled - Support symmetric encryption via keyring keys in af_alg - Flip hwrng default_quality, the default is now maximum entropy Algorithms: - Add library version of aesgcm - CFI fixes for assembly code - Add arm/arm64 accelerated versions of sm3/sm4 Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned - Fix selftest failures in rockchip - Add support for RK3328/RK3399 in rockchip - Add deflate support in qat - Merge ux500 into stm32 - Add support for TEE for PCI ID 0x14CA in ccp - Add mt7986 support in mtk - Add MaxLinear platform support in inside-secure - Add NPCM8XX support in npcm" * tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits) crypto: ux500/cryp - delete driver crypto: stm32/cryp - enable for use with Ux500 crypto: stm32 - enable drivers to be used on Ux500 dt-bindings: crypto: Let STM32 define Ux500 CRYP hwrng: geode - Fix PCI device refcount leak hwrng: amd - Fix PCI device refcount leak crypto: qce - Set DMA alignment explicitly crypto: octeontx2 - Set DMA alignment explicitly crypto: octeontx - Set DMA alignment explicitly crypto: keembay - Set DMA alignment explicitly crypto: safexcel - Set DMA alignment explicitly crypto: hisilicon/hpre - Set DMA alignment explicitly crypto: chelsio - Set DMA alignment explicitly crypto: ccree - Set DMA alignment explicitly crypto: ccp - Set DMA alignment explicitly crypto: cavium - Set DMA alignment explicitly crypto: img-hash - Fix variable dereferenced before check 'hdev->req' crypto: arm64/ghash-ce - use frame_push/pop macros consistently crypto: arm64/crct10dif - use frame_push/pop macros consistently crypto: arm64/aes-modes - use frame_push/pop macros consistently ... |
||
![]() |
48ea09cdda |
hardening updates for v6.2-rc1
- Convert flexible array members, fix -Wstringop-overflow warnings, and fix KCFI function type mismatches that went ignored by maintainers (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook). - Remove the remaining side-effect users of ksize() by converting dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add more __alloc_size attributes, and introduce full testing of all allocator functions. Finally remove the ksize() side-effect so that each allocation-aware checker can finally behave without exceptions. - Introduce oops_limit (default 10,000) and warn_limit (default off) to provide greater granularity of control for panic_on_oops and panic_on_warn (Jann Horn, Kees Cook). - Introduce overflows_type() and castable_to_type() helpers for cleaner overflow checking. - Improve code generation for strscpy() and update str*() kern-doc. - Convert strscpy and sigphash tests to KUnit, and expand memcpy tests. - Always use a non-NULL argument for prepare_kernel_cred(). - Disable structleak plugin in FORTIFY KUnit test (Anders Roxell). - Adjust orphan linker section checking to respect CONFIG_WERROR (Xin Li). - Make sure siginfo is cleared for forced SIGKILL (haifeng.xu). - Fix um vs FORTIFY warnings for always-NULL arguments. -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmOZSOoWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJjAAD/0YkvpU7f03f8hcQMJK6wv//24K AW41hEaBikq9RcmkuvkLLrJRibGgZ5O2xUkUkxRs/HxhkhrZ0kEw8sbwZe8MoWls F4Y9+TDjsrdHmjhfcBZdLnVxwcKK5wlaEcpjZXtbsfcdhx3TbgcDA23YELl5t0K+ I11j4kYmf9SLl4CwIrSP5iACml8CBHARDh8oIMF7FT/LrjNbM8XkvBcVVT6hTbOV yjgA8WP2e9GXvj9GzKgqvd0uE/kwPkVAeXLNFWopPi4FQ8AWjlxbBZR0gamA6/EB d7TIs0ifpVU2JGQaTav4xO6SsFMj3ntoUI0qIrFaTxZAvV4KYGrPT/Kwz1O4SFaG rN5lcxseQbPQSBTFNG4zFjpywTkVCgD2tZqDwz5Rrmiraz0RyIokCN+i4CD9S0Ds oEd8JSyLBk1sRALczkuEKo0an5AyC9YWRcBXuRdIHpLo08PsbeUUSe//4pe303cw 0ApQxYOXnrIk26MLElTzSMImlSvlzW6/5XXzL9ME16leSHOIfDeerPnc9FU9Eb3z ODv22z6tJZ9H/apSUIHZbMciMbbVTZ8zgpkfydr08o87b342N/ncYHZ5cSvQ6DWb jS5YOIuvl46/IhMPT16qWC8p0bP5YhxoPv5l6Xr0zq0ooEj0E7keiD/SzoLvW+Qs AHXcibguPRQBPAdiPQ== =yaaN -----END PGP SIGNATURE----- Merge tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - Convert flexible array members, fix -Wstringop-overflow warnings, and fix KCFI function type mismatches that went ignored by maintainers (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook) - Remove the remaining side-effect users of ksize() by converting dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add more __alloc_size attributes, and introduce full testing of all allocator functions. Finally remove the ksize() side-effect so that each allocation-aware checker can finally behave without exceptions - Introduce oops_limit (default 10,000) and warn_limit (default off) to provide greater granularity of control for panic_on_oops and panic_on_warn (Jann Horn, Kees Cook) - Introduce overflows_type() and castable_to_type() helpers for cleaner overflow checking - Improve code generation for strscpy() and update str*() kern-doc - Convert strscpy and sigphash tests to KUnit, and expand memcpy tests - Always use a non-NULL argument for prepare_kernel_cred() - Disable structleak plugin in FORTIFY KUnit test (Anders Roxell) - Adjust orphan linker section checking to respect CONFIG_WERROR (Xin Li) - Make sure siginfo is cleared for forced SIGKILL (haifeng.xu) - Fix um vs FORTIFY warnings for always-NULL arguments * tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits) ksmbd: replace one-element arrays with flexible-array members hpet: Replace one-element array with flexible-array member um: virt-pci: Avoid GCC non-NULL warning signal: Initialize the info in ksignal lib: fortify_kunit: build without structleak plugin panic: Expose "warn_count" to sysfs panic: Introduce warn_limit panic: Consolidate open-coded panic_on_warn checks exit: Allow oops_limit to be disabled exit: Expose "oops_count" to sysfs exit: Put an upper limit on how often we can oops panic: Separate sysctl logic from CONFIG_SMP mm/pgtable: Fix multiple -Wstringop-overflow warnings mm: Make ksize() a reporting-only function kunit/fortify: Validate __alloc_size attribute results drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() driver core: Add __alloc_size hint to devm allocators overflow: Introduce overflows_type() and castable_to_type() coredump: Proactively round up to kmalloc bucket size ... |
||
![]() |
08cdc21579 |
iommufd for 6.2
iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific: - Binding iommu_domain's to PASID/SSID - Userspace IO page tables, for ARM, x86 and S390 - Kernel bypassed invalidation of user page tables - Re-use of the KVM page table in the IOMMU - Dirty page tracking in the IOMMU - Runtime Increase/Decrease of IOPTE size - PRI support with faults resolved in userspace Many of these HW features exist to support VM use cases - for instance the combination of PASID, PRI and Userspace IO Page Tables allows an implementation of DMA Shared Virtual Addressing (vSVA) within a guest. Dirty tracking enables VM live migration with SRIOV devices and PASID support allow creating "scalable IOV" devices, among other things. As these features are fundamental to a VM platform they need to be uniformly exposed to all the driver families that do DMA into VMs, which is currently VFIO and VDPA. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl s7fAu+CQ1pr9+9NKGevD+frw8Solsw4= =jJkd -----END PGP SIGNATURE----- Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd implementation from Jason Gunthorpe: "iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific: - Binding iommu_domain's to PASID/SSID - Userspace IO page tables, for ARM, x86 and S390 - Kernel bypassed invalidation of user page tables - Re-use of the KVM page table in the IOMMU - Dirty page tracking in the IOMMU - Runtime Increase/Decrease of IOPTE size - PRI support with faults resolved in userspace Many of these HW features exist to support VM use cases - for instance the combination of PASID, PRI and Userspace IO Page Tables allows an implementation of DMA Shared Virtual Addressing (vSVA) within a guest. Dirty tracking enables VM live migration with SRIOV devices and PASID support allow creating "scalable IOV" devices, among other things. As these features are fundamental to a VM platform they need to be uniformly exposed to all the driver families that do DMA into VMs, which is currently VFIO and VDPA" For more background, see the extended explanations in Jason's pull request: https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/ * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits) iommufd: Change the order of MSI setup iommufd: Improve a few unclear bits of code iommufd: Fix comment typos vfio: Move vfio group specific code into group.c vfio: Refactor dma APIs for emulated devices vfio: Wrap vfio group module init/clean code into helpers vfio: Refactor vfio_device open and close vfio: Make vfio_device_open() truly device specific vfio: Swap order of vfio_device_container_register() and open_device() vfio: Set device->group in helper function vfio: Create wrappers for group register/unregister vfio: Move the sanity check of the group to vfio_create_group() vfio: Simplify vfio_create_group() iommufd: Allow iommufd to supply /dev/vfio/vfio vfio: Make vfio_container optionally compiled vfio: Move container related MODULE_ALIAS statements into container.c vfio-iommufd: Support iommufd for emulated VFIO devices vfio-iommufd: Support iommufd for physical VFIO devices vfio-iommufd: Allow iommufd to be used in place of a container fd vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent() ... |
||
![]() |
e2ca6ba6ba |
MM patches for 6.2-rc1.
- More userfaultfs work from Peter Xu. - Several convert-to-folios series from Sidhartha Kumar and Huang Ying. - Some filemap cleanups from Vishal Moola. - David Hildenbrand added the ability to selftest anon memory COW handling. - Some cpuset simplifications from Liu Shixin. - Addition of vmalloc tracing support by Uladzislau Rezki. - Some pagecache folioifications and simplifications from Matthew Wilcox. - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it. - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series shold have been in the non-MM tree, my bad. - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages. - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages. - Peter Xu utilized the PTE marker code for handling swapin errors. - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient. - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand. - zram support for multiple compression streams from Sergey Senozhatsky. - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway. - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations. - Vishal Moola removed the try_to_release_page() wrapper. - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache. - David Hildenbrand did some cleanup and repair work on KSM COW breaking. - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend. - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range(). - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen. - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect. - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages(). - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting. - David Hildenbrand has fixed some of our MM selftests for 32-bit machines. - Many singleton patches, as usual. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml CodAgiA51qwzId3GRytIo/tfWZSezgA= =d19R -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - More userfaultfs work from Peter Xu - Several convert-to-folios series from Sidhartha Kumar and Huang Ying - Some filemap cleanups from Vishal Moola - David Hildenbrand added the ability to selftest anon memory COW handling - Some cpuset simplifications from Liu Shixin - Addition of vmalloc tracing support by Uladzislau Rezki - Some pagecache folioifications and simplifications from Matthew Wilcox - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it - Miguel Ojeda contributed some cleanups for our use of the __no_sanitize_thread__ gcc keyword. This series should have been in the non-MM tree, my bad - Naoya Horiguchi improved the interaction between memory poisoning and memory section removal for huge pages - DAMON cleanups and tuneups from SeongJae Park - Tony Luck fixed the handling of COW faults against poisoned pages - Peter Xu utilized the PTE marker code for handling swapin errors - Hugh Dickins reworked compound page mapcount handling, simplifying it and making it more efficient - Removal of the autonuma savedwrite infrastructure from Nadav Amit and David Hildenbrand - zram support for multiple compression streams from Sergey Senozhatsky - David Hildenbrand reworked the GUP code's R/O long-term pinning so that drivers no longer need to use the FOLL_FORCE workaround which didn't work very well anyway - Mel Gorman altered the page allocator so that local IRQs can remnain enabled during per-cpu page allocations - Vishal Moola removed the try_to_release_page() wrapper - Stefan Roesch added some per-BDI sysfs tunables which are used to prevent network block devices from dirtying excessive amounts of pagecache - David Hildenbrand did some cleanup and repair work on KSM COW breaking - Nhat Pham and Johannes Weiner have implemented writeback in zswap's zsmalloc backend - Brian Foster has fixed a longstanding corner-case oddity in file[map]_write_and_wait_range() - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang Chen - Shiyang Ruan has done some work on fsdax, to make its reflink mode work better under xfstests. Better, but still not perfect - Christoph Hellwig has removed the .writepage() method from several filesystems. They only need .writepages() - Yosry Ahmed wrote a series which fixes the memcg reclaim target beancounting - David Hildenbrand has fixed some of our MM selftests for 32-bit machines - Many singleton patches, as usual * tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits) mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio mm: mmu_gather: allow more than one batch of delayed rmaps mm: fix typo in struct pglist_data code comment kmsan: fix memcpy tests mm: add cond_resched() in swapin_walk_pmd_entry() mm: do not show fs mm pc for VM_LOCKONFAULT pages selftests/vm: ksm_functional_tests: fixes for 32bit selftests/vm: cow: fix compile warning on 32bit selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem mm,thp,rmap: fix races between updates of subpages_mapcount mm: memcg: fix swapcached stat accounting mm: add nodes= arg to memory.reclaim mm: disable top-tier fallback to reclaim on proactive reclaim selftests: cgroup: make sure reclaim target memcg is unprotected selftests: cgroup: refactor proactive reclaim code to reclaim_until() mm: memcg: fix stale protection of reclaim target memcg mm/mmap: properly unaccount memory on mas_preallocate() failure omfs: remove ->writepage jfs: remove ->writepage ... |
||
![]() |
70d822cfb7 | Merge branch 'zstd-next' into zstd-linus | ||
![]() |
7e68dd7d07 |
Networking changes for 6.2.
Core ---- - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations. - Add inet drop monitor support. - A few GRO performance improvements. - Add infrastructure for atomic dev stats, addressing long standing data races. - De-duplicate common code between OVS and conntrack offloading infrastructure. - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements. - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs. - Add the helper support for connection-tracking OVS offload. BPF --- - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF. - Make cgroup local storage available to non-cgroup attached BPF programs. - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers. - A relevant bunch of BPF verifier fixes and improvements. - Veristat tool improvements to support custom filtering, sorting, and replay of results. - Add LLVM disassembler as default library for dumping JITed code. - Lots of new BPF documentation for various BPF maps. - Add bpf_rcu_read_{,un}lock() support for sleepable programs. - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs. - Add support storing struct task_struct objects as kptrs in maps. - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values. - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions. Protocols --------- - TCP: implement Protective Load Balancing across switch links. - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path. - UDP: Introduce optional per-netns hash lookup table. - IPv6: simplify and cleanup sockets disposal. - Netlink: support different type policies for each generic netlink operation. - MPTCP: add MSG_FASTOPEN and FastOpen listener side support. - MPTCP: add netlink notification support for listener sockets events. - SCTP: add VRF support, allowing sctp sockets binding to VRF devices. - Add bridging MAC Authentication Bypass (MAB) support. - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios. - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage. - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading. - IPSec: extended ack support for more descriptive XFRM error reporting. - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking. - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks. - Tun: bump the link speed from 10Mbps to 10Gbps. - Tun/VirtioNet: implement UDP segmentation offload support. Driver API ---------- - PHY/SFP: improve power level switching between standard level 1 and the higher power levels. - New API for netdev <-> devlink_port linkage. - PTP: convert existing drivers to new frequency adjustment implementation. - DSA: add support for rx offloading. - Autoload DSA tagging driver when dynamically changing protocol. - Add new PCP and APPTRUST attributes to Data Center Bridging. - Add configuration support for 800Gbps link speed. - Add devlink port function attribute to enable/disable RoCE and migratable. - Extend devlink-rate to support strict prioriry and weighted fair queuing. - Add devlink support to directly reading from region memory. - New device tree helper to fetch MAC address from nvmem. - New big TCP helper to simplify temporary header stripping. New hardware / drivers ---------------------- - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches. - Marvel Prestera AC5X Ethernet Switch. - WangXun 10 Gigabit NIC. - Motorcomm yt8521 Gigabit Ethernet. - Microchip ksz9563 Gigabit Ethernet Switch. - Microsoft Azure Network Adapter. - Linux Automation 10Base-T1L adapter. - PHY: - Aquantia AQR112 and AQR412. - Motorcomm YT8531S. - PTP: - Orolia ART-CARD. - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices. - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices. - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets. - Realtek RTL8852BE and RTL8723DS. - Cypress.CYW4373A0 WiFi + Bluetooth combo device. Drivers ------- - CAN: - gs_usb: bus error reporting support. - kvaser_usb: listen only and bus error reporting support. - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping. - implement devlink-rate support. - support direct read from memory. - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate. - Support for enhanced events compression. - extend H/W offload packet manipulation capabilities. - implement IPSec packet offload mode. - nVidia/Mellanox (mlx4): - better big TCP support. - Netronome Ethernet NICs (nfp): - IPsec offload support. - add support for multicast filter. - Broadcom: - RSS and PTP support improvements. - AMD/SolarFlare: - netlink extened ack improvements. - add basic flower matches to offload, and related stats. - Virtual NICs: - ibmvnic: introduce affinity hint support. - small / embedded: - FreeScale fec: add initial XDP support. - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood. - TI am65-cpsw: add suspend/resume support. - Mediatek MT7986: add RX wireless wthernet dispatch support. - Realtek 8169: enable GRO software interrupt coalescing per default. - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP. - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support. - add ip6gre support. - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support. - enable flow offload support. - Renesas: - add rswitch R-Car Gen4 gPTP support. - Microchip (lan966x): - add full XDP support. - add TC H/W offload via VCAP. - enable PTP on bridge interfaces. - Microchip (ksz8): - add MTU support for KSZ8 series. - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan. - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support. - add ack signal support. - enable coredump support. - remain_on_channel support. - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities. - 320 MHz channels support. - RealTek WiFi (rtw89): - new dynamic header firmware format support. - wake-over-WLAN support. Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmOYXUcSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOk8zQP/R7BZtbJMTPiWkRnSoKHnAyupDVwrz5U ktukLkwPsCyJuEbAjgxrxf4EEEQ9uq2FFlxNSYuKiiQMqIpFxV6KED7LCUygn4Tc kxtkp0Q+5XiqisWlQmtfExf2OjuuPqcjV9tWCDBI6GebKUbfNwY/eI44RcMu4BSv DzIlW5GkX/kZAPqnnuqaLsN3FudDTJHGEAD7NbA++7wJ076RWYSLXlFv0Z+SCSPS H8/PEG0/ZK/65rIWMAFRClJ9BNIDwGVgp0GrsIvs1gqbRUOlA1hl1rDM21TqtNFf 5QPQT7sIfTcCE/nerxKJD5JE3JyP+XRlRn96PaRw3rt4MgI6I/EOj/HOKQ5tMCNc oPiqb7N70+hkLZyr42qX+vN9eDPjp2koEQm7EO2Zs+/534/zWDs24Zfk/Aa1ps0I Fa82oGjAgkBhGe/FZ6i5cYoLcyxqRqZV1Ws9XQMl72qRC7/BwvNbIW6beLpCRyeM yYIU+0e9dEm+wHQEdh2niJuVtR63hy8tvmPx56lyh+6u0+pondkwbfSiC5aD3kAC ikKsN5DyEsdXyiBAlytCEBxnaOjQy4RAz+3YXSiS0eBNacXp03UUrNGx4Pzpu/D0 QLFJhBnMFFCgy5to8/DvKnrTPgZdSURwqbIUcZdvU21f1HLR8tUTpaQnYffc/Whm V8gnt1EL+0cc =CbJC -----END PGP SIGNATURE----- Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ... |
||
![]() |
8b9ed79c2d |
- Move the 32-bit memmove() asm implementation out-of-line in order to
fix a 32-bit full LTO build failure with clang where it would fail at register allocation. Move it to an asm file and clean it up while at it, similar to what has been already done on 64-bit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYYQMACgkQEsHwGGHe VUqs3xAAvc1nsW0FiR3DWE7+k9jti8OwDMRt51n/zX9wjVrYeJM/6pLNqu+rBnLQ A18dhRMVm2QKcxh06bcth/B1V0zvYUMRaOrucjAMkBQ/XAVsEEt3ZSgklj7rYm1S phG+YhzxJWP9KdmiN29kfBj6kS9QdYYHQyca1KWxTlggWSIwlCvIzQ8k9ip8s/5W 9fxiU/P9KA8a4aEkzeQ+waytylus8Swbl19zjnmfHswCi+l2ekS9PfXDE190ec01 ePSLn2dX1bbPCIIvKD7z6gWR7BOJLpVTv2ftg4XzcozZ7ebBaaQxXczhTvUPOtG0 NOuYTz4hI+AcG5QZU8JgGbDXqS//NLIklwydfXgS1fNiwudmO62Y734mL8MV0aw7 FVy7zTXamHb0D10ES0e9tL5GLSTYs0NZ6/193PNERUEdUWj/Ix9FPbuw53DYs3gh 7BkZPRsrOJYmAtTG5fg44SMyG2MHsfsU7+3Xl0nHUKihgdZi7YdmuhLqXnhczCwe HvQFgUF3d5oRjcApYLJKHP88XnPH7o5ogIRXL1WEiZ0+SgChAzckKdVjjYrd3FLq ppnr7uZQCJaT4YoL+zqcQEQD0ukC4BfhlxmXj1IuSlpqnIXOf+JD0WOF3/twErLm g8PE+PYkm+am6TAFDDU/45/DqpEJ+vCD1SJNfRtDeS4piFV0OzQ= =hby2 -----END PGP SIGNATURE----- Merge tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Borislav Petkov: - Move the 32-bit memmove() asm implementation out-of-line in order to fix a 32-bit full LTO build failure with clang where it would fail at register allocation. Move it to an asm file and clean it up while at it, similar to what has been already done on 64-bit * tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mem: Move memmove to out of line assembler |
||
![]() |
c5589c436d |
regulator: Updates for v6.2
Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. - An API for requesting all regulators defined in DT. - Conversion of lots of drivers to the I2C probe_new() API. - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190. There's a cross tree merge with the I2C tree in order to use the new i2c_client_get_device_id() helper in the conversions to probe_new(). -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOXIIcACgkQJNaLcl1U h9DW8Af/SkLjUIhuMYrln1QBKvJfMOzAIOo8LeCRCU6E8IxsDu/zccEva6dqr/M/ DFkq5VBCH7cX7VIvaHLjED/VdM0n+JG35tzwv83TVuAohLW/qsRdO6RE9IRBJcUd 7wUj2gjUBjjnCwbpI0hTygqQHvIxO0deQVYoQsxF8VwJTQ+ufpA3TJ3tmxqeWvbd N/qkLohCk9NoFgiMjzBxBonacaZEvHkjUtqRthHm/nx8Mdu9NhBb6ai6KIpN7EJD CaY+nUOx/cW8YJWBaZ32bcnvRgtanJGWn+p49/JmUCu0lIEOX2r7jds/kBo/hWWl akGDUTcmvZY0CfrJfbx+FJxcA1A7Jg== =Dmpg -----END PGP SIGNATURE----- Merge tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. Summary: - An API for requesting all regulators defined in DT - Conversion of lots of drivers to the I2C probe_new() API - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190" * tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits) regulator: core: Use different devices for resource allocation and DT lookup dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() regulator: add mt6357 regulator regulator: dt-bindings: Add binding schema for mt6357 regulators regulator: core: fix resource leak in regulator_register() regulator: core: fix module refcount leak in set_supply() regulator: core: fix use_count leakage when handling boot-on regulator: rk808: Use dev_err_probe regulator: rk808: reduce 'struct rk808' usage regulator: Drop obsolete dependencies on COMPILE_TEST regulator: pv88080-regulator: Convert to i2c's .probe_new() regulator: pfuze100-regulator: Convert to i2c's .probe_new() regulator: isl6271a-regulator: Convert to i2c's .probe_new() regulator: fan53555: Convert to i2c's .probe_new() regulator: act8865-regulator: Convert to i2c's .probe_new() regulator: qcom-rpmh: Add support for PM8550 regulators regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550 regulator: tps65023-regulator: Convert to i2c's .probe_new() regulator: tps62360-regulator: Convert to i2c's .probe_new() ... |
||
![]() |
ce8a79d560 |
for-6.2/block-2022-12-08
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmOScsgQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpi5ID/9pLXFYOq1+uDjU0KO/MdjMjK8Ukr34lCnk WkajRLheE8JBKOFDE54XJk56sQSZHX9bTWqziar0h1fioh7FlQR/tVvzsERCm2M9 2y9THJNJygC68wgybStyiKlshFjl7TD7Kv5N9Y3xP3mkQygT+D6o8fXZk5xQbYyH YdFSoq4rJVHxRL03yzQiReGGIYdOUEQQh8l1FiLwLlKa3lXAey1KuxWIzksVN0KK aZB4QhiBpOiPgDHUVisq2XtyQjpZ2byoCImPzgrcqk9Jo4esvm/e6esrg4xlsvII LKFFkTmbVqjUZtFjqakFHmfuzVor4nU5f+xb90ZHExuuODYckkxWp5rWhf9QwqqI 0ik6WYgI1/5vnHnX8f2DYzOFQf9qa/rLgg0CshyUODlD6RfHa9vntqYvlIFkmOBd Q7KblIoK8YTzUS1M+v7X8JQ7gDR2KwygH37Da2KJS+vgvfIb8kJGr1ZORuhJuJJ7 Bl69gaNkHTHrqufp7UI64YXfueeuNu2J9z3zwzGoxeaFaofF/phDn0/2gCQE1fQI XBhsMw+ETqI6B2SPHMnzYDu2DM1S8ZTOYQlaD4G3uqgWnAM1tG707395uAy5yu4n D5azU1fVG4UocoNIyPujpaoSRs2zWZycEFEeUQkhyDDww/j4hlHi6H33eOnk0zsr wxzFGfvHfw== =k/vv -----END PGP SIGNATURE----- Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan Joshi) - Refactor PCIe probing and reset (Christoph Hellwig) - Various fabrics authentication fixes and improvements (Sagi Grimberg) - Avoid fallback to sequential scan due to transient issues (Uday Shankar) - Implement support for the DEAC bit in Write Zeroes (Christoph Hellwig) - Allow overriding the IEEE OUI and firmware revision in configfs for nvmet (Aleksandr Miloserdov) - Force reconnect when number of queue changes in nvmet (Daniel Wagner) - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi Grimberg, Christoph Hellwig, Christophe JAILLET) - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni) - Use the common tagset helpers in nvme-pci driver (Christoph Hellwig) - Cleanup the nvme-pci removal path (Christoph Hellwig) - Use kstrtobool() instead of strtobool (Christophe JAILLET) - Allow unprivileged passthrough of Identify Controller (Joel Granados) - Support io stats on the mpath device (Sagi Grimberg) - Minor nvmet cleanup (Sagi Grimberg) - MD pull requests via Song: - Code cleanups (Christoph) - Various fixes - Floppy pull request from Denis: - Fix a memory leak in the init error path (Yuan) - Series fixing some batch wakeup issues with sbitmap (Gabriel) - Removal of the pktcdvd driver that was deprecated more than 5 years ago, and subsequent removal of the devnode callback in struct block_device_operations as no users are now left (Greg) - Fix for partition read on an exclusively opened bdev (Jan) - Series of elevator API cleanups (Jinlong, Christoph) - Series of fixes and cleanups for blk-iocost (Kemeng) - Series of fixes and cleanups for blk-throttle (Kemeng) - Series adding concurrent support for sync queues in BFQ (Yu) - Series bringing drbd a bit closer to the out-of-tree maintained version (Christian, Joel, Lars, Philipp) - Misc drbd fixes (Wang) - blk-wbt fixes and tweaks for enable/disable (Yu) - Fixes for mq-deadline for zoned devices (Damien) - Add support for read-only and offline zones for null_blk (Shin'ichiro) - Series fixing the delayed holder tracking, as used by DM (Yu, Christoph) - Series enabling bio alloc caching for IRQ based IO (Pavel) - Series enabling userspace peer-to-peer DMA (Logan) - BFQ waker fixes (Khazhismel) - Series fixing elevator refcount issues (Christoph, Jinlong) - Series cleaning up references around queue destruction (Christoph) - Series doing quiesce by tagset, enabling cleanups in drivers (Christoph, Chao) - Series untangling the queue kobject and queue references (Christoph) - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye, Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph) * tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits) blktrace: Fix output non-blktrace event when blk_classic option enabled block: sed-opal: Don't include <linux/kernel.h> sed-opal: allow using IOC_OPAL_SAVE for locking too blk-cgroup: Fix typo in comment block: remove bio_set_op_attrs nvmet: don't open-code NVME_NS_ATTR_RO enumeration nvme-pci: use the tagset alloc/free helpers nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers nvme: consolidate setting the tagset flags nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set block: bio_copy_data_iter nvme-pci: split out a nvme_pci_ctrl_is_dead helper nvme-pci: return early on ctrl state mismatch in nvme_reset_work nvme-pci: rename nvme_disable_io_queues nvme-pci: cleanup nvme_suspend_queue nvme-pci: remove nvme_pci_disable nvme-pci: remove nvme_disable_admin_queue nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl nvme: use nvme_wait_ready in nvme_shutdown_ctrl ... |
||
![]() |
75f4d9af8b |
iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing more of the same for the future. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ 65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N MzwiRTeqnGDxTTF7mgd//IB6hoatAA== =bcvF -----END PGP SIGNATURE----- Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "iov_iter work; most of that is about getting rid of direction misannotations and (hopefully) preventing more of the same for the future" * tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: use less confusing names for iov_iter direction initializers iov_iter: saner checks for attempt to copy to/from iterator [xen] fix "direction" argument of iov_iter_kvec() [vhost] fix 'direction' argument of iov_iter_{init,bvec}() [target] fix iov_iter_bvec() "direction" argument [s390] memcpy_real(): WRITE is "data source", not destination... [s390] zcore: WRITE is "data source", not destination... [infiniband] READ is "data destination", not source... [fsi] WRITE is "data source", not destination... [s390] copy_oldmem_kernel() - WRITE is "data source", not destination csum_and_copy_to_iter(): handle ITER_DISCARD get rid of unlikely() on page_copy_sane() calls |
||
![]() |
8702f2c611 |
Non-MM patches for 6.2-rc1.
- A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line. - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files. - A series from Yang Yingliang to address rapido memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t(). - And a whole shower of singleton patches all over the place. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5efRgAKCRDdBJ7gKXxA jgvdAP0al6oFDtaSsshIdNhrzcMwfjt6PfVxxHdLmNhF1hX2dwD/SVluS1bPSP7y 0sZp7Ustu3YTb8aFkMl96Y9m9mY1Nwg= =ga5B -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ... |
||
![]() |
a7cacfb068 |
This was a not-too-busy cycle for documentation; highlights include:
- The beginnings of a set of translations into Spanish, headed up by Carlos Bilbao. - More Chinese translations. - A change to the Sphinx "alabaster" theme by default for HTML generation. Unlike the previous default (Read the Docs), alabaster is shipped with Sphinx by default, reducing the number of other dependencies that need to be installed. It also (IMO) produces a cleaner and more readable result. - The ability to render the documentation into the texinfo format (something Sphinx could always do, we just never wired it up until now). Plus the usual collection of typo fixes, build-warning fixes, and minor updates. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmOW8rQACgkQF0NaE2wM flhMPQf+IlaaSPmjjAM68RPW465KP1s7MxeAMz8RmQ+qNqHPlWznTnIOvH2NLNtA U4pcokeGunVEAsLdHCEE/VCUk76p8pWpEle4bKpbS0Qgl83IcLKnPLm8vWFc2Nv9 VdjntswlsMEIFRjD+4MJcPYcoi9ZtuU0fD/7rpyfU/hmJCBlPvyxb+BXPK5sf6a6 25Zex1UipNB+ieR7UD6Vf2ZhdUS0A0qzEQPaCTfCKzHmjEIVqq6G/+qnxAp3aSf2 at+Sz//3Ny86PO0qlmyeh656L1STMWjMjek6/Z6yKTWInxaeAo39cn8n//Sdpzfy mC7SMEwX7JtYKqgxZYfLDhU4txByKA== =0zgk -----END PGP SIGNATURE----- Merge tag 'docs-6.2' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "This was a not-too-busy cycle for documentation; highlights include: - The beginnings of a set of translations into Spanish, headed up by Carlos Bilbao - More Chinese translations - A change to the Sphinx "alabaster" theme by default for HTML generation. Unlike the previous default (Read the Docs), alabaster is shipped with Sphinx by default, reducing the number of other dependencies that need to be installed. It also (IMO) produces a cleaner and more readable result. - The ability to render the documentation into the texinfo format (something Sphinx could always do, we just never wired it up until now) Plus the usual collection of typo fixes, build-warning fixes, and minor updates" * tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits) Documentation/features: Use loongarch instead of loong Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR docs/zh_CN: Fix '.. only::' directive's expression docs/sp_SP: Add memory-barriers.txt Spanish translation docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI Documentation/features: Update feature lists for 6.1 Documentation: Fixed a typo in bootconfig.rst docs/sp_SP: Add process coding-style translation docs/sp_SP: Add kernel-docs.rst Spanish translation docs: Create translations/sp_SP/process/, move submitting-patches.rst docs: Add book to process/kernel-docs.rst docs: Retire old resources from kernel-docs.rst docs: Update maintainer of kernel-docs.rst Documentation: riscv: Document the sv57 VM layout Documentation: USB: correct possessive "its" usage math64: fix kernel-doc return value warnings math64: add kernel-doc for DIV64_U64_ROUND_UP math64: favor kernel-doc from header files doc: add texinfodocs and infodocs targets ... |
||
![]() |
96f4263568 |
Rust changes for v6.2
The first set of changes after the merge, the major ones being: - String and formatting: new types `CString`, `CStr`, `BStr` and `Formatter`; new macros `c_str!`, `b_str!` and `fmt!`. - Errors: the rest of the error codes from `errno-base.h`, as well as some `From` trait implementations for the `Error` type. - Printing: the rest of the `pr_*!` levels and the continuation one `pr_cont!`, as well as a new sample. - `alloc` crate: new constructors `try_with_capacity()` and `try_with_capacity_in()` for `RawVec` and `Vec`. - Procedural macros: new macros `#[vtable]` and `concat_idents!`, as well as better ergonomics for `module!` users. - Asserting: new macros `static_assert!`, `build_error!` and `build_assert!`, as well as a new crate `build_error` to support them. - Vocabulary types: new types `Opaque` and `Either`. - Debugging: new macro `dbg!`. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmOVJTQACgkQGXyLc2ht IW3cLA//dn0/rN2sCJBsX8/mNQqRXQvM45QUP5ESd5w01fRXEpvHZ+MbfdcFZN8K oQEgZwTwTKvKY6V+xCPmEiUvk5jniCzdEjTFtDhVhA+qimxY/FMS3zozuJMQIlz2 zTiZ4aEM1zFAwoDHnnOmaCO+C0zw5d9UFIKO4nIvOSy3gD/eLgiFz3cyTh8Q2+BT lPyqeKg9+xKIl8tWa5zGYHgZASGguV0EpXFn4Ck4eBOH6O9ovWgakdzZp0BMJ9Ca UNIFpFjLMUkCwzZkPqIyI9IZEOzUYWTTfWU9S5JJ6IzC3aT8NPp3WeSYW9TgVnvO z5n6rsYOgvKeWCvGIgq82fgVbGMNaaP1MFxNLsdbWWj+9lfebpk62aQXSuWsvASq /W39/xEhOOLikyb3ObVHLW1r1lu9guSeP8eaMQ5ci/99kypHHBOXmB/nr9pxPkrr kovxuZedDbgEYunbVmwWGmvLg8dcjadfeXf6Dkc6bwDvyhiuX9W21z9ppT9nV5NW chYRAPROCHuBRu+txft9gIjyE1/V7G8CyeWiG36VWN8Tayc5iJEWOopk4GJcEpJi MS5tAJru7fBZcXjFausN3mdXyRwMLdilTZ2Qkp6MqzXi5zwVuKH1wsJ7CLkPBWQC tAPJts6krOonI2cd2JM8ds+Wj5Q1cDGQuF6Rj29/27aUBKH1w2Y= =iIcK -----END PGP SIGNATURE----- Merge tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux Pull rust updates from Miguel Ojeda: "The first set of changes after the merge, the major ones being: - String and formatting: new types 'CString', 'CStr', 'BStr' and 'Formatter'; new macros 'c_str!', 'b_str!' and 'fmt!'. - Errors: the rest of the error codes from 'errno-base.h', as well as some 'From' trait implementations for the 'Error' type. - Printing: the rest of the 'pr_*!' levels and the continuation one 'pr_cont!', as well as a new sample. - 'alloc' crate: new constructors 'try_with_capacity()' and 'try_with_capacity_in()' for 'RawVec' and 'Vec'. - Procedural macros: new macros '#[vtable]' and 'concat_idents!', as well as better ergonomics for 'module!' users. - Asserting: new macros 'static_assert!', 'build_error!' and 'build_assert!', as well as a new crate 'build_error' to support them. - Vocabulary types: new types 'Opaque' and 'Either'. - Debugging: new macro 'dbg!'" * tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux: (28 commits) rust: types: add `Opaque` type rust: types: add `Either` type rust: build_assert: add `build_{error,assert}!` macros rust: add `build_error` crate rust: static_assert: add `static_assert!` macro rust: std_vendor: add `dbg!` macro based on `std`'s one rust: str: add `fmt!` macro rust: str: add `CString` type rust: str: add `Formatter` type rust: str: add `c_str!` macro rust: str: add `CStr` unit tests rust: str: implement several traits for `CStr` rust: str: add `CStr` type rust: str: add `b_str!` macro rust: str: add `BStr` type rust: alloc: add `Vec::try_with_capacity{,_in}()` constructors rust: alloc: add `RawVec::try_with_capacity_in()` constructor rust: prelude: add `error::code::*` constant items rust: error: add `From` implementations for `Error` rust: error: add codes from `errno-base.h` ... |
||
![]() |
e2ed78d5d9 |
linux-kselftest-kunit-next-6.2-rc1
This KUnit next update for Linux 6.2-rc1 consists of several enhancements, fixes, clean-ups, documentation updates, improvements to logging and KTAP compliance of KUnit test output: - log numbers in decimal and hex - parse KTAP compliant test output - allow conditionally exposing static symbols to tests when KUNIT is enabled - make static symbols visible during kunit testing - clean-ups to remove unused structure definition -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmOXnPYACgkQCwJExA0N Qxwf9RAAwdBKxgPZuKZ40v69Jm8YhaO3vyKUkyYRH59/HQGFUHMA2f2ONez4krEX iXPgBFQ+7pB63FdgQi2HSg2z/u3xY02AaGgZGXDuNJDmg2xYjNDfZ0GjN6tuavlN Liz01DGZkjZoVVXM6oV2xT8woBg/0BbdkKNL1OBO9RBZFHzwDryRzfXmQb8cKlNr S+tkeZTlCA/s7UW2LNj4VlTzn6wgni4Y9gSk4wbQmSGWn3OX3rHaqAb7GiZ/yPGb 1WjbMeE8FwyydLU40aOZZ8V6AJRiw5VGPJyFzWJyWZ21xOgN9Z95b+I36z8RXraA i/wnazO/FJsrhzvKL83rQkrSW6bpmVY+jGvk+L6deFM6Ro/vEWHJ4DgyKsIdMiJy gUM1Q69szptq+ZRHGrZWPlVONBkBXMOL+fePbCbGcMzlaEAS/zsFYW9IBKcvLzwP uHzzMS/cMmSUq52ZIyl9jhHQFVSoErCpJwQjAaZBQpYXPmE7yLcZItxnCaSUQTay bRwyps5ph5md0oJTTFJKZ4Zx5FJ2ItjbC4y9BIexb9gYRDdRq723ivDoVENZl/Zk DFIV95AY+mSxadS5vFagwWwX0ZN0KFKxeM8Tw7VTimal/0Sbglqp+oflsuKFD6JQ b5HUixYifKMbWxkH5xrUb8NdjmBj561TYa8U4N+j3oOiaPYu5Ss= =UQNn -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "Several enhancements, fixes, clean-ups, documentation updates, improvements to logging and KTAP compliance of KUnit test output: - log numbers in decimal and hex - parse KTAP compliant test output - allow conditionally exposing static symbols to tests when KUNIT is enabled - make static symbols visible during kunit testing - clean-ups to remove unused structure definition" * tag 'linux-kselftest-kunit-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: dev-tools: Clarify requirements for result description apparmor: test: make static symbols visible during kunit testing kunit: add macro to allow conditionally exposing static symbols to tests kunit: tool: make parser preserve whitespace when printing test log Documentation: kunit: Fix "How Do I Use This" / "Next Steps" sections kunit: tool: don't include KTAP headers and the like in the test log kunit: improve KTAP compliance of KUnit test output kunit: tool: parse KTAP compliant test output mm: slub: test: Use the kunit_get_current_test() function kunit: Use the static key when retrieving the current test kunit: Provide a static key to check if KUnit is actively running tests kunit: tool: make --json do nothing if --raw_ouput is set kunit: tool: tweak error message when no KTAP found kunit: remove KUNIT_INIT_MEM_ASSERTION macro Documentation: kunit: Remove redundant 'tips.rst' page Documentation: KUnit: reword description of assertions Documentation: KUnit: make usage.rst a superset of tips.rst, remove duplication kunit: eliminate KUNIT_INIT_*_ASSERT_STRUCT macros kunit: tool: remove redundant file.close() call in unit test kunit: tool: unit tests all check parser errors, standardize formatting a bit ... |
||
![]() |
268325bda5 |
Random number generator updates for Linux 6.2-rc1.
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmOU+U8ACgkQSfxwEqXe A67NnQ//Y5DltmvibyPd7r1TFT2gUYv+Rx3sUV9ZE1NYptd/SWhhcL8c5FZ70Fuw bSKCa1uiWjOxosjXT1kGrWq3de7q7oUpAPSOGxgxzoaNURIt58N/ajItCX/4Au8I RlGAScHy5e5t41/26a498kB6qJ441fBEqCYKQpPLINMBAhe8TQ+NVp0rlpUwNHFX WrUGg4oKWxdBIW3HkDirQjJWDkkAiklRTifQh/Al4b6QDbOnRUGGCeckNOhixsvS waHWTld+Td8jRrA4b82tUb2uVZ2/b8dEvj/A8CuTv4yC0lywoyMgBWmJAGOC+UmT ZVNdGW02Jc2T+Iap8ZdsEmeLHNqbli4+IcbY5xNlov+tHJ2oz41H9TZoYKbudlr6 /ReAUPSn7i50PhbQlEruj3eg+M2gjOeh8OF8UKwwRK8PghvyWQ1ScW0l3kUhPIhI PdIG6j4+D2mJc1FIj2rTVB+Bg933x6S+qx4zDxGlNp62AARUFYf6EgyD6aXFQVuX RxcKb6cjRuFkzFiKc8zkqg5edZH+IJcPNuIBmABqTGBOxbZWURXzIQvK/iULqZa4 CdGAFIs6FuOh8pFHLI3R4YoHBopbHup/xKDEeAO9KZGyeVIuOSERDxxo5f/ITzcq APvT77DFOEuyvanr8RMqqh0yUjzcddXqw9+ieufsAyDwjD9DTuE= =QRhK -----END PGP SIGNATURE----- Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ... |
||
![]() |
a312a8cc3c |
cgroup changes for v6.2-rc1
Nothing too interesting. * Add CONFIG_DEBUG_GROUP_REF which makes cgroup refcnt operations kprobable. * A couple cpuset optimizations. * Other misc changes including doc and test updates. -----BEGIN PGP SIGNATURE----- iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY5bHvg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGcYrAQCfrlzrbWw6gTQ7fmr0Avxjy5FxLjsdzEGPcmGY ByEMhgD/VdUf3zI/Khr91Gsi5JXQxQf7a5caD369xupRWUWjqA8= =Nf+E -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Nothing too interesting: - Add CONFIG_DEBUG_GROUP_REF which makes cgroup refcnt operations kprobable - A couple cpuset optimizations - Other misc changes including doc and test updates" * tag 'cgroup-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: remove rcu_read_lock()/rcu_read_unlock() in critical section of spin_lock_irq() cgroup/cpuset: Improve cpuset_css_alloc() description kselftest/cgroup: Add cleanup() to test_cpuset_prs.sh cgroup/cpuset: Optimize cpuset_attach() on v2 cgroup/cpuset: Skip spread flags update on v2 kselftest/cgroup: Fix gathering number of CPUs cgroup: cgroup refcnt functions should be exported when CONFIG_DEBUG_CGROUP_REF cgroup: Implement DEBUG_CGROUP_REF |
||
![]() |
1280d4b76f |
lib: packing: replace bit_reverse() with bitrev8()
Remove bit_reverse() function. Instead use bitrev8() from linux/bitrev.h + bitshift. Reduces code-repetition. Signed-off-by: Uladzislau Koshchanka <koshchanka@gmail.com> Link: https://lore.kernel.org/r/20221210004423.32332-1-koshchanka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
c1f0fcd85d |
cxl for 6.2
- Add the cpu_cache_invalidate_memregion() API for cache flushing in response to physical memory reconfiguration, or memory-side data invalidation from operations like secure erase or memory-device unlock. - Add a facility for the kernel to warn about collisions between kernel and userspace access to PCI configuration registers - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1) - Add handling and reporting of CXL errors reported via the PCIe AER mechanism - Add support for CXL Persistent Memory Security commands - Add support for the "XOR" algorithm for CXL host bridge interleave - Rework / simplify CXL to NVDIMM interactions - Miscellaneous cleanups and fixes -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs= =HAQk -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.2. While it may seem backwards, the CXL update this time around includes some focus on CXL 1.x enabling where the work to date had been with CXL 2.0 (VH topologies) in mind. First generation CXL can mostly be supported via BIOS, similar to DDR, however it became clear there are use cases for OS native CXL error handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x hosts (Restricted CXL Host (RCH) topologies). So, this update brings RCH topologies into the Linux CXL device model. In support of the ongoing CXL 2.0+ enabling two new core kernel facilities are added. One is the ability for the kernel to flag collisions between userspace access to PCI configuration registers and kernel accesses. This is brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware mailbox over config-cycles. The other is a cpu_cache_invalidate_memregion() API that maps to wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest VMs and architectures that do not support it yet. The CXL paths that need it, dynamic memory region creation and security commands (erase / unlock), are disabled when it is not present. As for the CXL 2.0+ this cycle the subsystem gains support Persistent Memory Security commands, error handling in response to PCIe AER notifications, and support for the "XOR" host bridge interleave algorithm. Summary: - Add the cpu_cache_invalidate_memregion() API for cache flushing in response to physical memory reconfiguration, or memory-side data invalidation from operations like secure erase or memory-device unlock. - Add a facility for the kernel to warn about collisions between kernel and userspace access to PCI configuration registers - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1) - Add handling and reporting of CXL errors reported via the PCIe AER mechanism - Add support for CXL Persistent Memory Security commands - Add support for the "XOR" algorithm for CXL host bridge interleave - Rework / simplify CXL to NVDIMM interactions - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits) cxl/region: Fix memdev reuse check cxl/pci: Remove endian confusion cxl/pci: Add some type-safety to the AER trace points cxl/security: Drop security command ioctl uapi cxl/mbox: Add variable output size validation for internal commands cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size cxl/security: Fix Get Security State output payload endian handling cxl: update names for interleave ways conversion macros cxl: update names for interleave granularity conversion macros cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry tools/testing/cxl: Require cache invalidation bypass cxl/acpi: Fail decoder add if CXIMS for HBIG is missing cxl/region: Fix spelling mistake "memergion" -> "memregion" cxl/regs: Fix sparse warning cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support tools/testing/cxl: Add an RCH topology cxl/port: Add RCD endpoint port enumeration cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem tools/testing/cxl: Add XOR Math support to cxl_test cxl/acpi: Support CXL XOR Interleave Math (CXIMS) ... |
||
![]() |
6c738b5231 |
kunit: improve KTAP compliance of KUnit test output
Change KUnit test output to better comply with KTAP v1 specifications found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html. 1) Use "KTAP version 1" instead of "TAP version 14" as test output header 2) Remove '-' between test number and test name on test result lines 2) Add KTAP version lines to each subtest header as well Note that the new KUnit output still includes the “# Subtest” line now located after the KTAP version line. This does not completely match the KTAP v1 spec but since it is classified as a diagnostic line, it is not expected to be disruptive or break any existing parsers. This “# Subtest” line comes from the TAP 14 spec (https://testanything.org/tap-version-14-specification.html) and it is used to define the test name before the results. Original output: TAP version 14 1..1 # Subtest: kunit-test-suite 1..3 ok 1 - kunit_test_1 ok 2 - kunit_test_2 ok 3 - kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 - kunit-test-suite New output: KTAP version 1 1..1 KTAP version 1 # Subtest: kunit-test-suite 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 kunit-test-suite Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
![]() |
909c6475d5 |
mm: slub: test: Use the kunit_get_current_test() function
Use the newly-added function kunit_get_current_test() instead of accessing current->kunit_test directly. This function uses a static key to return more quickly when KUnit is enabled, but no tests are actively running. There should therefore be a negligible performance impact to enabling the slub KUnit tests. Other than the performance improvement, this should be a no-op. Cc: Oliver Glitta <glittao@gmail.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Gow <davidgow@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
![]() |
908d0c177b |
kunit: Provide a static key to check if KUnit is actively running tests
KUnit does a few expensive things when enabled. This hasn't been a problem because KUnit was only enabled on test kernels, but with a few people enabling (but not _using_) KUnit on production systems, we need a runtime way of handling this. Provide a 'kunit_running' static key (defaulting to false), which allows us to hide any KUnit code behind a static branch. This should reduce the performance impact (on other code) of having KUnit enabled to a single NOP when no tests are running. Note that, while it looks unintuitive, tests always run entirely within __kunit_test_suites_init(), so it's safe to decrement the static key at the end of this function, rather than in __kunit_test_suites_exit(), which is only there to clean up results in debugfs. Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
![]() |
f10bc40168 |
A single update for debugobjetcs:
Add the object pointer to the debug output for better correlation with other debug facilities. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmOUeukTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoWdCD/93/TiOebMyE/ghYWzmbgXPgCS2WD8H Wo7mRqm//4ZkKlpfurSQMjsdabdUyxeD7rSmxk4bgiz6RM9gAiK4ruRg/36tWzoS 2seTgsPaYiluTCI5k6buWejBmO72d3yTAypmnAjHc8yRYverHEEkcUGnxMtiUowg XhmAsFf02zNlTZjwgNAoDDAoEWICTdozWg74j0vYmCP3oH9i08n9JI+TK14C8dUr Rnhigq5mdDDsrNk7336dNPbg5yudT1IPNFtckV+FQ4xIi6xZEsfcP+XMw/K//pEL EJ2WItkcVPCXZCsfHr4QcFgtSDd+XPYcYKvenwLdctceT1/Kely7soYsi1nSc7FA 46Bp+qeVyiASqbYw1O2U4Zec/DEcjdd4PH0ISs2zxX2t1N63F5e6WZ1kfI9IQRA6 wjA9KGD86hX5DCtAUF0zGZNUcSHXjELuL8RNLXlnK3ahDQLNi2hrKrLNLEk9368C BfWjjSDHXY/SK8uITHcwjjCmmTb8YdftLJlxpE35n/tTKdyKxpN4HQBK/dAiaD2/ CsfzyH5XdIDe0jdLo1AT+ukhpSjGetWStbBx9wFY7E88OIIBQfGbwHYofZRcu0+f IjXQxObFO2xqd3U28rM5Oa6Xv/s16tcKxkULxO3lzeDMZ3TD9HzbiJds8Dq8223g I/I7kIrd/XjVag== =JERo -----END PGP SIGNATURE----- Merge tag 'core-debugobjects-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects update from Thomas Gleixner: "A single update for debugobjects: Add the object pointer to the debug output for better correlation with other debug facilities" * tag 'core-debugobjects-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Print object pointer in debug_print_object() |
||
![]() |
47477c84b8 |
s390 updates for 6.2 merge window
- Factor out handle_write() function and simplify 3215 console write operation. - When 3170 terminal emulator is connected to the 3215 console driver the boot time could be very long due to limited buffer space or missing operator input. Add con3215_drop command line parameter and con3215_drop sysfs attribute file to instruct the kernel drop console data when such conditions are met. - Fix white space errors in 3215 console driver. - Move enum paiext_mode definition to a header file and rename it to paievt_mode to indicate this is now used for several events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with PAI_MODE_SAMPLING. - Simplify the logic of PMU pai_crypto mapped buffer reference counter and make it consistent with PMU pai_ext. - Rename PMU pai_crypto mapped buffer structure member users to active_events to make it consistent with PMU pai_ext. - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per 2G hugetlb page (~1.6%). - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and scrap s390-specific versions. - The generic percpu setup code does not expect the s390-like implementation and emits a warning. To get rid of that warning and provide sane CPU-to-node and CPU-to-CPU distance mappings implementat a minimal version of setup_per_cpu_areas(). - Use kstrtobool() instead of strtobool() for re-IPL sysfs device attributes. - Avoid unnecessary lookup of a pointer to MSI descriptor when setting IRQ affinity for a PCI device. - Get rid of "an incompatible function type cast" warning by changing debug_sprintf_format_fn() function prototype so it matches the debug_format_proc_t function type. - Remove unused info_blk_hdr__pcpus() and get_page_state() functions. - Get rid of clang "unused unused insn cache ops function" warning by moving s390_insn definition to a private header. - Get rid of clang "unused function" warning by making function raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is enabled. - Use kstrobool() to parse sclp_con_drop parameter to make it identical to the con3215_drop parameter and allow passing values like "yes" and "true". - Use sysfs_emit() for all SCLP sysfs show functions, which is the current standard way to generate output strings. - Make SCLP con_drop sysfs attribute also writable and allow to change its value during runtime. This makes SCLP console drop handling consistent with the 3215 device driver. - Virtual and physical addresses are indentical on s390. However, there is still a confusion when pointers are directly casted to physical addresses or vice versa. Use correct address converters virt_to_phys() and phys_to_virt() for s390 channel IO drivers. - Support for power managemant has been removed from s390 since quite some time. Remove unused power managemant code from the appldata device driver. - Allow memory tools like KASAN see memory accesses from the checksum code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does. - Add support of ECKD DASDs disks so it could be used as boot and dump devices. - Follow checkpatch recommendations and use octal values instead of S_IRUGO and S_IWUSR for dump device attributes in sysfs. - Changes to vx-insn.h do not cause a recompile of C files that use asm(".include \"asm/vx-insn.h\"\n") magic to access vector instruction macros from inline assemblies. Add wrapper include header file to avoid this problem. - Use vector instruction macros instead of byte patterns to increase register validation routine readability. - The current machine check register validation handling does not take into account various scenarios and might lead to killing a wrong user process or potentially ignore corrupted FPU registers. Simplify logic of the machine check handler and stop the whole machine if the previous context was kerenel mode. If the previous context was user mode, kill the current task. - Introduce sclp_emergency_printk() function which can be used to emit a message in emergency cases. It is supposed to be used in cases where regular console device drivers may not work anymore, e.g. unrecoverable machine checks. Keep the early Service-Call Control Block so it can also be used after initdata has been freed to allow sclp_emergency_printk() implementation. - In case a system will be stopped because of an unrecoverable machine check error print the machine check interruption code to give a hint of what went wrong. - Move storage error checking from the assembly entry code to C in order to simplify machine check handling. Enter the handler with DAT turned on, which simplifies the entry code even more. - The machine check extended save areas are allocated using a private "nmi_save_areas" slab cache which guarantees a required power-of-two alignment. Get rid of that cache in favour of kmalloc(). -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY5ckrhccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8NlrAQD8NCLeEAkhGCRnzdTyngExCrzV Mw//cEnksUkIPqalJgEArbyFjGh05ecNaiDQduH8Gh94/qOhGE4obMdTgMWq7QY= =3aou -----END PGP SIGNATURE----- Merge tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Factor out handle_write() function and simplify 3215 console write operation - When 3170 terminal emulator is connected to the 3215 console driver the boot time could be very long due to limited buffer space or missing operator input. Add con3215_drop command line parameter and con3215_drop sysfs attribute file to instruct the kernel drop console data when such conditions are met - Fix white space errors in 3215 console driver - Move enum paiext_mode definition to a header file and rename it to paievt_mode to indicate this is now used for several events. Rename PAI_MODE_COUNTER to PAI_MODE_COUNTING to make consistent with PAI_MODE_SAMPLING - Simplify the logic of PMU pai_crypto mapped buffer reference counter and make it consistent with PMU pai_ext - Rename PMU pai_crypto mapped buffer structure member users to active_events to make it consistent with PMU pai_ext - Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP configuration option. This results in saving of 12K per 1M hugetlb page (~1.2%) and 32764K per 2G hugetlb page (~1.6%) - Use generic serial.h, bugs.h, shmparam.h and vga.h header files and scrap s390-specific versions - The generic percpu setup code does not expect the s390-like implementation and emits a warning. To get rid of that warning and provide sane CPU-to-node and CPU-to-CPU distance mappings implementat a minimal version of setup_per_cpu_areas() - Use kstrtobool() instead of strtobool() for re-IPL sysfs device attributes - Avoid unnecessary lookup of a pointer to MSI descriptor when setting IRQ affinity for a PCI device - Get rid of "an incompatible function type cast" warning by changing debug_sprintf_format_fn() function prototype so it matches the debug_format_proc_t function type - Remove unused info_blk_hdr__pcpus() and get_page_state() functions - Get rid of clang "unused unused insn cache ops function" warning by moving s390_insn definition to a private header - Get rid of clang "unused function" warning by making function raw3270_state_final() only available if CONFIG_TN3270_CONSOLE is enabled - Use kstrobool() to parse sclp_con_drop parameter to make it identical to the con3215_drop parameter and allow passing values like "yes" and "true" - Use sysfs_emit() for all SCLP sysfs show functions, which is the current standard way to generate output strings - Make SCLP con_drop sysfs attribute also writable and allow to change its value during runtime. This makes SCLP console drop handling consistent with the 3215 device driver - Virtual and physical addresses are indentical on s390. However, there is still a confusion when pointers are directly casted to physical addresses or vice versa. Use correct address converters virt_to_phys() and phys_to_virt() for s390 channel IO drivers - Support for power managemant has been removed from s390 since quite some time. Remove unused power managemant code from the appldata device driver - Allow memory tools like KASAN see memory accesses from the checksum code. Switch to GENERIC_CSUM if KASAN is enabled, just like x86 does - Add support of ECKD DASDs disks so it could be used as boot and dump devices - Follow checkpatch recommendations and use octal values instead of S_IRUGO and S_IWUSR for dump device attributes in sysfs - Changes to vx-insn.h do not cause a recompile of C files that use asm(".include \"asm/vx-insn.h\"\n") magic to access vector instruction macros from inline assemblies. Add wrapper include header file to avoid this problem - Use vector instruction macros instead of byte patterns to increase register validation routine readability - The current machine check register validation handling does not take into account various scenarios and might lead to killing a wrong user process or potentially ignore corrupted FPU registers. Simplify logic of the machine check handler and stop the whole machine if the previous context was kerenel mode. If the previous context was user mode, kill the current task - Introduce sclp_emergency_printk() function which can be used to emit a message in emergency cases. It is supposed to be used in cases where regular console device drivers may not work anymore, e.g. unrecoverable machine checks Keep the early Service-Call Control Block so it can also be used after initdata has been freed to allow sclp_emergency_printk() implementation - In case a system will be stopped because of an unrecoverable machine check error print the machine check interruption code to give a hint of what went wrong - Move storage error checking from the assembly entry code to C in order to simplify machine check handling. Enter the handler with DAT turned on, which simplifies the entry code even more - The machine check extended save areas are allocated using a private "nmi_save_areas" slab cache which guarantees a required power-of-two alignment. Get rid of that cache in favour of kmalloc() * tag 's390-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (38 commits) s390/nmi: get rid of private slab cache s390/nmi: move storage error checking back to C, enter with DAT on s390/nmi: print machine check interruption code before stopping system s390/sclp: introduce sclp_emergency_printk() s390/sclp: keep sclp_early_sccb s390/nmi: rework register validation handling s390/nmi: use vector instruction macros instead of byte patterns s390/vx: add vx-insn.h wrapper include file s390/ipl: use octal values instead of S_* macros s390/ipl: add eckd dump support s390/ipl: add eckd support vfio/ccw: identify CCW data addresses as physical vfio/ccw: sort out physical vs virtual pointers usage s390/checksum: support GENERIC_CSUM, enable it for KASAN s390/appldata: remove power management callbacks s390/cio: sort out physical vs virtual pointers usage s390/sclp: allow to change sclp_console_drop during runtime s390/sclp: convert to use sysfs_emit() s390/sclp: use kstrobool() to parse sclp_con_drop parameter s390/3270: make raw3270_state_final() depend on CONFIG_TN3270_CONSOLE ... |
||
![]() |
893660b0e1 |
slab updates for 6.2-rc1
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmOTQvYACgkQ4CHKc/GJ qRCaqQf/UjCDmj1vYKcsTzp5L4MDXdQPA7dKtytbnZtROtClVNUzB0jODsfeMI7C SwbDJRoUU1y99GRFYIx9oGji1q7TYOWS/PsZxOGkv8ILommmQ1kJdZdxt9rOqYNg 3mjCZoQmZMIRipLDrN55C096Mi+mI89kkE4Lkyrigpmxvc0KyX6QBerr+VmaBMHw DjmFC6Gj+ZH2AX6z7AzOF1gZ42gPBQUjWdHFRcY41dShOQZNl2FPT5ITAvotlJlH 9mj6woCqW936UOcpUl+Qqk7mekDJb1hqmYXV2VAlhprBi6Vcd9PU6GmPPb6w51bS HkSNNYjkbuNxBXY13PUPcR0hEHv9zw== =AlWx -----END PGP SIGNATURE----- Merge tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - SLOB deprecation and SLUB_TINY The SLOB allocator adds maintenance burden and stands in the way of API improvements [1]. Deprecate it by renaming the config option (to make users notice) to CONFIG_SLOB_DEPRECATED with updated help text. SLUB should be used instead as SLAB will be the next on the removal list. Based on reports from a riscv k210 board with 8MB RAM, add a CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the expense of scalability. This has resolved the k210 regression [2] so in case there are no others (that wouldn't be resolvable by further tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles. Existing defconfigs with CONFIG_SLOB are converted to CONFIG_SLUB_TINY. - kmalloc() slub_debug redzone improvements A series from Feng Tang that builds on the tracking or requested size for kmalloc() allocations (for caches with debugging enabled) added in 6.1, to make redzone checks consider the requested size and not the rounded up one, in order to catch more subtle buffer overruns. Includes new slub_kunit test. - struct slab fields reordering to accomodate larger rcu_head RCU folks would like to grow rcu_head with debugging options, which breaks current struct slab layout's assumptions, so reorganize it to make this possible. - Miscellaneous improvements/fixes: - __alloc_size checking compiler workaround (Kees Cook) - Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes) - Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina) - Correct SLUB's percpu allocation estimates (Baoquan He) - Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov) - Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao) - Dead code removal in SLUB (Hyeonggon Yoo) * tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits) mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED mm, slub: don't aggressively inline with CONFIG_SLUB_TINY mm, slub: remove percpu slabs with CONFIG_SLUB_TINY mm, slub: split out allocations from pre/post hooks mm/slub, kunit: Add a test case for kmalloc redzone check mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation mm, slub: refactor free debug processing mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY mm, slub: disable SYSFS support with CONFIG_SLUB_TINY mm, slub: add CONFIG_SLUB_TINY mm, slab: ignore hardened usercopy parameters when disabled slab: Remove special-casing of const 0 size allocations slab: Clean up SLOB vs kmalloc() definition mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head mm/migrate: make isolate_movable_page() skip slab pages mm/slab: move and adjust kernel-doc for kmem_cache_alloc mm/slub, percpu: correct the calculation of early percpu allocation size ... |
||
![]() |
98d0052d0d |
printk changes for 6.2
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmORzikACgkQUqAMR0iA lPKF/g/7Bmcao3rJkZjEagsYY+s7rGhaFaSbML8FDdyE3UzeXLJOnNxBLrD0JIe9 XFW7+DMqr2uRxsab5C7APy0mrIWp/zCGyJ8CmBILnrPDNcAQ27OhFzxv6WlMUmEc xEjGHrk5dFV96s63gyHGLkKGOZMd/cfcpy/QDOyg0vfF8EZCiPywWMbQQ2Ij8E50 N6UL70ExkoLjT9tzb8NXQiaDqHxqNRvd15aIomDjRrce7eeaL4TaZIT7fKnEcULz 0Lmdo8RUknonCI7Y00RWdVXMqqPD2JsKz3+fh0vBnXEN+aItwyxis/YajtN+m6l7 jhPGt7hNhCKG17auK0/6XVJ3717QwjI3+xLXCvayA8jyewMK14PgzX70hCws0eXM +5M+IeXI4ze5qsq+ln9Dt8zfC+5HGmwXODUtaYTBWhB4nVWdL/CZ+nTv349zt+Uc VIi/QcPQ4vq6EfsxUZR2r6Y12+sSH40iLIROUfqSchtujbLo7qxSNF5x7x9+rtff nWuXo5OsjGE7TZDwn3kr0zSuJ+w/pkWMYQ7jch+A2WqUMYyGC86sL3At7ocL+Esq 34uvzwEgWnNySV8cLiMh34kBmgBwhAP34RhV0RS9iCv8kev2DV7pLQTs9V3QAjw9 EZnFDHATUdikgugaFKCeDV86R3wFgnRWWOdlRrRi6aAzFDqNcYk= =1PTZ -----END PGP SIGNATURE----- Merge tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Add NMI-safe SRCU reader API. It uses atomic_inc() instead of this_cpu_inc() on strong load-store architectures. - Introduce new console_list_lock to synchronize a manipulation of the list of registered consoles and their flags. This is a first step in removing the big-kernel-lock-like behavior of console_lock(). This semaphore still serializes console->write() calbacks against: - each other. It primary prevents potential races between early and proper console drivers using the same device. - suspend()/resume() callbacks and init() operations in some drivers. - various other operations in the tty/vt and framebufer susbsystems. It is likely that console_lock() serializes even operations that are not directly conflicting with the console->write() callbacks here. This is the most complicated big-kernel-lock aspect of the console_lock() that will be hard to untangle. - Introduce new console_srcu lock that is used to safely iterate and access the registered console drivers under SRCU read lock. This is a prerequisite for introducing atomic console drivers and console kthreads. It will reduce the complexity of serialization against normal consoles and console_lock(). Also it should remove the risk of deadlock during critical situations, like Oops or panic, when only atomic consoles are registered. - Check whether the console is registered instead of enabled on many locations. It was a historical leftover. - Cleanly force a preferred console in xenfb code instead of a dirty hack. - A lot of code and comment clean ups and improvements. * tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits) printk: htmldocs: add missing description tty: serial: sh-sci: use setup() callback for early console printk: relieve console_lock of list synchronization duties tty: serial: kgdboc: use console_list_lock to trap exit tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console() tty: serial: kgdboc: use console_list_lock for list traversal tty: serial: kgdboc: use srcu console list iterator proc: consoles: use console_list_lock for list iteration tty: tty_io: use console_list_lock for list synchronization printk, xen: fbfront: create/use safe function for forcing preferred netconsole: avoid CON_ENABLED misuse to track registration usb: early: xhci-dbc: use console_is_registered() tty: serial: xilinx_uartps: use console_is_registered() tty: serial: samsung_tty: use console_is_registered() tty: serial: pic32_uart: use console_is_registered() tty: serial: earlycon: use console_is_registered() tty: hvc: use console_is_registered() efi: earlycon: use console_is_registered() tty: nfcon: use console_is_registered() serial_core: replace uart_console_enabled() with uart_console_registered() ... |
||
![]() |
3a28c2c89f |
Enable -funsigned-char and fix code affected by that flag.
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmOOBhcACgkQSfxwEqXe A65pPBAAnKLnV0/pqCEO655pvWC9mhEXGsVkpsC0SkszXqKGJGEnc2ueC0S7tmB9 j+tPz2ea5hOjE2Os8iSrt5CYzha3dXugdZoCzW5ZXI3XLpUis83sQkkji0gxsMw+ 3H28LvfM+NvfNuc0vvWTfQ61S9SXSvIT7cB5UE5vynolpPxD+ofgss3YAEkWWsP8 tXAcT3/BfyRoUc0iLGEULcjhhyLl8uvGhqQgnPE5rSKLyXh5Wu7kc7npzpVqniCN EGV61pB0sNeCOSJF/1HK13oFf76DKMuCMcckQyBcqOoKHbKidqKccELjpMM2UC3K ygC3EcLP6lgXDo+Cty8bRIWu14jv1MbhMt9oMDHHoI664DOC8E86iUOFM2jF4PwW xaDZ7W359O8OqS4n0b/YsopmfHsq/Vb3GVdURYVEfH4sWeOcYD1mGbKSRhb5UkRf gZJB5nK51kgBbQGAhaPRkmetueSUFOxoexzpivmwiKcb1kMYoBulYLJFLQ80nWAb yHI2pYfzUUCqLBGNTVgM3MlhIcxUgXyHDQbsIc9mBmk361lG0PAVqocqbt/zbNM2 QPALqfrYeOc2xK3zRF2MMiEGTrgEI0d7KNv1LBrPyqAZezpvYcsSAzrBM8wG7AO8 UGwrgHp2VNw0pDReBUZ4/7lpO7YcqnKuDAtoW8Z9NPrZyAcL/Rg= =CxjR -----END PGP SIGNATURE----- Merge tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux Pull unsigned-char conversion from Jason Donenfeld: "Enable -funsigned-char and fix code affected by that flag. During the 6.1 cycle, several patches already made it into the tree, which were for code that was already broken on at least one architecture, where the naked char had a different sign than the code author anticipated, or were part of some bug fix for an existing bug that this initiative unearthed. These 6.1-era fixes are: |
||
![]() |
f433cf2102 |
KCSAN updates for v6.2
This series adds instrumentation for memcpy(), memset(), and memmove() for Clang v16+'s new function names that are used when the -fsanitize=thread argument is given. It also fixes objtool warnings from KCSAN's volatile instrumentation, and fixes a pair of typos in a pair of Kconfig options' help clauses. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmOKn5gTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jHoyD/9gkMct9vIgKRZbMYW9haoLIJlYiwrT sps8x2PssOwy99I89BTEovnIyPdQ9y3uLuHWMHAUcSN0JZqe797OIEnFImPiXPQF q2dEg4zeHXGlD0+EDpr+FUcu1Sc4ppk2AqQiS4YiIfQzunS2RMETB+FkehLDMmgm sJCd40E+xsCbq8yeCYOP2UkDeeJbVvdekli3GsjCu8vjE2UYaBjjZugXgIge9lOQ FnMfJfrcQutLgLrm4oz2s2Jt7Km3Bl40IJVYeFGdrKBaIXhCXKsbESfOdudRGRTb jPNf7s7Ofce8b3DQcT/sr8II49CZ0ekhEsExTfGdQKTz+2tghxGolY7VOZ8Nvd78 fM4SHicN/JREMcLTES0VNR+qPQLoFX1qtIXWQUt6OvxP1EoMandRahaGv+OYJ2Cm lWcmiZWJIDNhQukgnFn2wSd2pkn+Bqj5S6oUhBdcjvVBvt2vCCJtHfZenCLJvJLq k7nPvofvxA7oec9kDRcwJz+Np29DT7MR8gcn0kElF/Biq1F/wlKNuXyX9Sexm821 XQWEWUGFOtirK9BtxDI8R1uIpKWvLm66mnoXDWSb9kTZrkZHc2sa5j7ipPfOtWkr GAPfGrn2o6ckg7M5SKlRo87RdjDzyFxLXn5vqkmwMM8ntRTq8nc7JpJSxX96wVJm v5+HXwRwB5iT0w== =/aBz -----END PGP SIGNATURE----- Merge tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull KCSAN updates from Paul McKenney: - Add instrumentation for memcpy(), memset(), and memmove() for Clang v16+'s new function names that are used when the -fsanitize=thread argument is given - Fix objtool warnings from KCSAN's volatile instrumentation, and typos in a pair of Kconfig options' help clauses * tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: kcsan: Fix trivial typo in Kconfig help comments objtool, kcsan: Add volatile read/write instrumentation to whitelist kcsan: Instrument memcpy/memset/memmove with newer Clang |
||
![]() |
1fab45ab6e |
RCU pull request for v6.2
This pull request contains the following branches: doc.2022.10.20a: Documentation updates. This is the second in a series from an ongoing review of the RCU documentation. fixes.2022.10.21a: Miscellaneous fixes. lazy.2022.11.30a: Introduces a default-off Kconfig option that depends on RCU_NOCB_CPU that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument CPU lists, causes call_rcu() to introduce delays. These delays result in significant power savings on nearly idle Android and ChromeOS systems. These savings range from a few percent to more than ten percent. This series also includes several commits that change call_rcu() to a new call_rcu_hurry() function that avoids these delays in a few cases, for example, where timely wakeups are required. Several of these are outside of RCU and thus have acks and reviews from the relevant maintainers. srcunmisafe.2022.11.09a: Creates an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe() for architectures that support NMIs, but which do not provide NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required by the upcoming lockless printk() work by John Ogness et al. That printk() series depends on these commits, so if you pull the printk() series before this one, you will have already pulled in this branch, plus two more SRCU commits: |
||
![]() |
e47877c7aa |
rhashtable: Allow rhashtable to be used from irq-safe contexts
rhashtable currently only does bh-safe synchronization making it impossible to use from irq-safe contexts. Switch it to use irq-safe synchronization to remove the restriction. v2: Update the lock functions to return the ulong flags value and unlock functions to take the value directly instead of passing around the pointer. Suggested by Linus. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: David Vernet <dvernet@meta.com> Acked-by: Josh Don <joshdon@google.com> Acked-by: Hao Luo <haoluo@google.com> Acked-by: Barret Rhoden <brho@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
837e8ac871 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
6b2b0d839a | Merge branch 'rework/console-list-lock' into for-linus |