The DP83TG720S-Q1 device is an IEEE 802.3bp and Open Alliance compliant
automotive Ethernet physical layer transceiver.
This driver was tested with i.MX8MP EQOS (stmmac) on the MAC side and
same TI PHY on other side.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move part of the genphy_c45_pma_read_abilities() code to a separate
function.
Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but
do implement PMA/PMD extended ability register (Register 1.11). To make
use of it, we need to be able to access this part of code separately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pedro Tammela says:
====================
net/sched: optimizations around action binding and init
Scaling optimizations for action binding in rtnl-less filters.
We saw a noticeable lock contention around idrinfo->lock when
testing in a 56 core system, which disappeared after the patches.
====================
Link: https://lore.kernel.org/r/20231211181807.96028-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_idr_insert_many will replace the allocated -EBUSY pointer in
tcf_idr_check_alloc with the real action pointer, exposing it
to all operations. This operation is only needed when the action pointer
is created (ACT_P_CREATED). For actions which are bound to (returned 0),
the pointer already resides in the idr making such operation a nop.
Even though it's a nop, it's still not a cheap operation as internally
the idr code walks the idr and then does a replace on the appropriate slot.
So if the action was bound, better skip the idr replace entirely.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.
Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
tc actions add action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter ls ...
filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.
When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.
As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.
In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c847 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
conventions for filemap_lock_folio() are not the same as for
find_lock_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZXnZHAAKCRBZ7Krx/gZQ
6y3QAQCazzMsqWYmqfkbR5yGjolKBPS6ILFWBHWoFySs9/WptAEA3c/960nhFuh1
aQE9Qp5zUlbWmSZ5zjz3Q2lX8N/jugU=
=kyMm
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs fix from Al Viro:
"ufs got broken this merge window on folio conversion - calling
conventions for filemap_lock_folio() are not the same as for
find_lock_page()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix ufs_get_locked_folio() breakage
- Deal with a regression in the recently refactored x86 EFI stub code on
older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZXgvLAAKCRAwbglWLn0t
XLgKAP9oKLP7v0TD2BJOPGqr4kEtMfZYayV2EUN387VbPYfT0wEAoeDeZmaGUYce
BuovToERSgjj2FylAWNlZATEh2d35ww=
=kv9E
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Deal with a regression in the recently refactored x86 EFI stub code
on older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Avoid physical KASLR on older Dell systems
efi/loongarch: Use load address to calculate kernel entry address
filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.
Fixes: 5fb7bd50b3 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Heng Qi says:
====================
virtio-net: support dynamic coalescing moderation
Now, virtio-net already supports per-queue moderation parameter
setting. Based on this, we use the linux dimlib to support
dynamic coalescing moderation for virtio-net.
Due to some scheduling issues, we only support and test the rx dim.
Some test results:
I. Sockperf UDP
=================================================
1. Env
rxq_0 with affinity to cpu_0.
2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989
3. Result
dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%.
dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.
=================================================
II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is
dim off: 978437.23
dim on: 1143638.28
=================================================
III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, requests/sec of wrk client is
dim off: 877931.67
dim on: 1019160.31
=================================================
IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989
2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10
After running this cmd 5 times and averaging the results,
3. Result
dim off: 17.7735 usec
dim on: 18.0110 usec
=================================================
Changelog:
v7->v8:
- Add select DIMLIB.
v6->v7:
- Drop the patch titled "spin lock for ctrl cmd access"
- Use rtnl_trylock to avoid the deadlock.
v5->v6:
- Add patch(4/5): spin lock for ctrl cmd access
- Patch(5/5):
- Use spin lock and cancel_work_sync to synchronize
v4->v5:
- Patch(4/4):
- Fix possible synchronization issues with cancel_work_sync.
- Reduce if/else nesting levels
v3->v4:
- Patch(5/5): drop.
v2->v3:
- Patch(4/5): some minor modifications.
v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
- improve the judgment of dim switch conditions.
- Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
By comparing the traffic information in the complete napi processes,
let the virtio-net driver automatically adjust the coalescing
moderation parameters of each receive queue.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract commands to set virtqueue coalescing parameters for reuse
by ethtool -Q, vq resize and netdim.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch separates the rx and tx global coalescing moderation
commands to support netdim switches in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx netdim needs to count the traffic during a complete napi process,
and start updating and comparing samples to make decisions after
the napi ends. Let virtqueue_napi_complete() return true if napi is done,
otherwise vice versa.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: updates to PCI error handling
These are improvements to our PCI error handling, including FLR and
AER events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the pci_error_handlers error_detected and resume to be useful in
handling AER events. If the error detected is pci_channel_io_frozen we
set up to do an FLR at the end of the AER handling - this tends to clear
things up well enough that traffic can continue. Else, let the AER/PCI
machinery do what is needed for the less serious errors seen.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove and restore the lif's debugfs pointers on a reset,
and make sure to check for the dentry before removing it
in case an earlier reset failed to rebuild the lif.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When stopping the watchdog timer at remove time we should
be using the new timer_shutdown_sync to assure the timer
doesn't ever get rearmed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there was a failed attempt to reset the PCI connection,
don't later try to read from PCI as the space is unmapped
and will cause a paging request crash. When clearing the PCI
setup we can clear the dev_info register pointer, and check
it before using it in the fw_running test.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a reset fails, the PCI device is left in a disabled
state, so don't try to disable it again on driver remove.
This prevents a scary looking WARN trace in the kernel log.
ionic 0000:2b:00.0: disabling already-disabled device
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands. This speeds up shutdown and
prevents unnecessary timeouts and error messages.
This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we keep and replay the filters and RSS config across
an FLR by using our FW_RESET flag. This gets checked on the
way down and on the way back up to help determine how much LIF
state to keep and restore across a reset action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yanteng Si says:
====================
stmmac: Some bug fixes
* Put Krzysztof's patch into my thread, pick Conor's Reviewed-by
tag and Jiaxun's Acked-by tag.(prev version is RFC patch)
* I fixed an Oops related to mdio, mainly to ensure that
mdio is initialized before use, because it will be used
in a series of patches I am working on.
see <https://lore.kernel.org/loongarch/cover.1699533745.git.siyanteng@loongson.cn/T/#t>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Complete all counters on XGMAC Core.
These can be useful for debugging.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.
For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.
Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:
import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorldServlet extends HttpServlet {
@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=utf-8");
OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
String s = "a".repeat(3096);
osw.write(s,0,s.length());
osw.flush();
}
}
Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed. With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.
# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.91ms
75.000% 1.12ms
90.000% 1.46ms
99.000% 1.73ms
99.900% 1.96ms
99.990% 43.62ms <<< 40+ ms extra latency
99.999% 48.32ms
100.000% 49.34ms
# With patch
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.89ms
75.000% 1.13ms
90.000% 1.44ms
99.000% 1.67ms
99.900% 1.78ms
99.990% 2.27ms <<< no 40+ ms extra latency
99.999% 3.71ms
100.000% 4.57ms
Fixes: f54b311142 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: phy: at803x: cleanup
The intention of this big series is to try to cleanup the big
at803x PHY driver.
It currently have 3 different family of PHY in it. at803x, qca83xx
and qca808x.
The current codebase required lots of cleanup and reworking to
make the split possible as currently there is a greater use of
adding special function matching the phy_id.
This has been reworked to make the function actually generic
and make the change only in more specific one. The result
is the addition of micro additional function but that is for good
as it massively simplify splitting the driver later.
Consider that this is all in preparation for the addition of
qca807x PHY driver that will also uso some of the functions of
at803x.
Subsequent series will come with the actual PHY split and other
required cleanup. This is only to start the process with minor
changes.
Changes v4:
- Improve at8031_probe function
Changes v3:
- Add Reviewed-by tag from Andrew
- Split patch 10 (at8031 rename) to rename and move
Changes v2:
- Drop split part due to series too big
- Split changes even more
- Fix problem pointed out by Russell (flawed reworked function logic)
- Add Reviewed-by tag from Andrew
- Minor rework to prevent further code duplication for cdt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop specific PHY ID check for cable test functions for at803x. This is
done to make functions more generic. While at it better describe what
the functions does by using more symbolic function names.
PHYs that requires to set additional reg are moved to specific function
calling the more generic one.
cdt_start and cdt_wait_for_completion are changed to take an additional
arg to pass specific values specific to the PHY.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move at8035 specific DT parse for clock out frequency to dedicated probe
to make at803x probe function more generic.
This is to tidy code and no behaviour change are intended.
Detection logic is changed, we check if the clk 25m mask is set and if
it's not zero, we assume the qca,clk-out-frequency property is set.
The property is checked in the generic at803x_parse_dt called by
at803x_probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move at8031 functions in dedicated section with dedicated at8031
parse_dt and probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename at8031 related DT function name to a more specific name
referencing they are only related to at8031 and not to the generic
at803x PHY family.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move specific at8031 config_intr bits to dedicated function to make
at803x_config_initr more generic.
This is needed in preparation for PHY driver split as qca8081 share the
same function to setup interrupts.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move specific at8031 WOL enable/disable to dedicated function to make
at803x_set_wol more generic.
This is needed in preparation for PHY driver split as qca8081 share the
same function to toggle WOL settings.
In this new implementation WOL module in at8031 is enabled after the
generic interrupt is setup. This should not cause any problem as the
WOL_INT has a separate implementation and only relay on MAC bits.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move specific at8031 config_init to dedicated function to make
at803x_config_init more generic and tidy things up.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move specific at8031 probe mode check to dedicated probe to make
at803x_probe more generic and keep code tidy.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move specific DT options for at8031 to specific probe to tidy things up
and make at803x_parse_dt more generic.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework qca83xx specific check to dedicated function to tidy things up
and drop useless phy_id check.
Also drop an useless link_change_notify for QCA8337 as it did nothing an
returned early.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function and the struct related to hw_stats were specific to qca83xx
PHY but were called following the convention in the driver of calling
everything with at803x prefix.
To better organize the code, rename these function a more specific name
to better describe that they are specific to 83xx PHY family.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the WOL disable call to specific at8031 probe to make at803x_probe
more generic and drop extra check for PHY ID.
Keep the same previous behaviour by first calling at803x_probe and then
disabling WOL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix passing the wrong reference for config_initr on passing the function
pointer, drop the wrong & from at803x_config_intr in the PHY struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mode supported is currently reported to the user exactly the same, as
the current mode. That's because mode changing is not implemented.
Remove the leftover mode_supported() op and use mode_get() to fill up
the supported mode exposed to user.
One, if even, mode changing is going to be introduced, this could be
very easily taken back. In the meantime, prevent drivers form
implementing this in wrong way (as for example recent netdevsim
implementation attempt intended to do).
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
User may not pass DPLL_A_PIN_STATE attribute in the pin set operation
message. Sanitize that by checking if the attr pointer is not null
and process the passed state attribute value only in that case.
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Arinzon says:
====================
ENA driver XDP bug fixes
This patchset contains multiple XDP-related bug fixes
in the ENA driver.
====================
Link: https://lore.kernel.org/r/20231211062801.27891-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending TX packets, the meta descriptor can be all zeroes
as no meta information is required (as in XDP).
This patch removes the validity check, as when
`disable_meta_caching` is enabled, such TX packets will be
dropped otherwise.
Fixes: 0e3a3f6dac ("net: ena: support new LLQ acceleration mode")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
