In SCSI, we get the sense data as part of the completion, for ATA however,
we need to fetch the sense data as an extra step. For an aborted ATA
command the sense data is fetched via libata's ->eh_strategy_handler().
For Command Duration Limits policy 0xD:
The device shall complete the command without error with the additional
sense code set to DATA CURRENTLY UNAVAILABLE.
In order to handle this policy in libata, we intend to send a successful
command via SCSI EH, and let libata's ->eh_strategy_handler() fetch the
sense data for the good command. This is similar to how we handle an
aborted ATA command, just that we need to read the Successful NCQ Commands
log instead of the NCQ Command Error log.
When we get a SATA completion with successful commands, ATA_SENSE will be
set, indicating that some commands in the completion have sense data.
The sense_valid bitmask in the Sense Data for Successful NCQ Commands log
will inform exactly which commands that had sense data, which might be a
subset of all the commands that was completed in the same completion. (Yet
all will have ATA_SENSE set, since the status is per completion.)
The successful commands that have e.g. a "DATA CURRENTLY UNAVAILABLE" sense
data will have a SCSI ML byte set, so scsi_eh_flush_done_q() will not set
the scmd->result to DID_TIME_OUT for these commands. However, the
successful commands that did not have sense data, must not get their result
marked as DID_TIME_OUT by SCSI EH.
Add a new flag SCMD_FORCE_EH_SUCCESS, which tells SCSI EH to not mark a
command as DID_TIME_OUT, even if it has scmd->result == SAM_STAT_GOOD.
This will be used by libata in a subsequent commit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-5-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce the new block I/O status BLK_STS_DURATION_LIMIT for LLDDs to
report command that failed due to a command duration limit being
exceeded. This new status is mapped to the ETIME error code to allow users
to differentiate "soft" duration limit failures from other more serious
hardware related errors.
If we compare BLK_STS_DURATION_LIMIT with BLK_STS_TIMEOUT:
-BLK_STS_DURATION_LIMIT means that the drive gave a reply indicating that
the command duration limit was exceeded before the command could be
completed. This I/O status is mapped to ETIME for user space.
-BLK_STS_TIMEOUT means that the drive never gave a reply at all.
This I/O status is mapped to ETIMEDOUT for user space.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-4-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
I/O priorities currently only use 6-bits of the 16-bits ioprio value: the
3-upper bits are used to define up to 8 priority classes (4 of which are
valid) and the 3 lower bits of the value are used to define a priority
level for the real-time and best-effort class.
The remaining 10-bits between the I/O priority class and level are unused,
and in fact, cannot be used by the user as doing so would either result in
the value being completely ignored, or in an error returned by
ioprio_check_cap().
Use these 10-bits of an ioprio value to allow a user to specify I/O
hints. An I/O hint is defined as a 10-bitsvalue, allowing up to 1023
different hints to be specified, with the value 0 being reserved as the "no
hint" case. An I/O hint can apply to any I/O that specifies a valid
priority class other than NONE, regardless of the I/O priority level
specified.
To do so, the macros IOPRIO_PRIO_HINT() and IOPRIO_PRIO_VALUE_HINT() are
introduced in include/uapi/linux/ioprio.h to respectively allow a user to
get and set a hint in an ioprio value.
To support the ATA and SCSI command duration limits feature, 7 hints are
defined: IOPRIO_HINT_DEV_DURATION_LIMIT_1 to
IOPRIO_HINT_DEV_DURATION_LIMIT_7, allowing a user to specify which command
duration limit descriptor should be applied to the commands serving an
I/O. Specifying these hints has for now no effect whatsoever if the target
block devices do not support the command duration limits feature. However,
in the future, block I/O schedulers can be modified to optimize I/O issuing
order based on these hints, even for devices that do not support the
command duration limits feature.
Given that the 7 duration limits hints defined have no effect on any block
layer component, the actual definition of the duration limits implied by
these hints remains at the device level.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-3-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The I/O priority user interface defines the 16-bits ioprio values as the
combination of the upper 3-bits for an I/O priority class and the lower
13-bits as priority data. However, the kernel only uses the lower 3-bits of
the priority data to define priority levels for the RT and BE priority
classes. The data part of an ioprio value is completely ignored for the
IDLE and NONE classes. This is enforced by checks done in
ioprio_check_cap(), which is called for all paths that allow defining an
I/O priority for I/Os: the per-context ioprio_set() system call, aio
interface and io_uring interface.
Clarify this fact in the uapi ioprio.h header file and introduce the
IOPRIO_PRIO_LEVEL_MASK and IOPRIO_PRIO_LEVEL() macros for users to define
and get priority levels in an ioprio value. The coarser macro
IOPRIO_PRIO_DATA() is retained for backward compatibility with old
applications already using it. There is no functional change introduced
with this.
In-kernel users of the IOPRIO_PRIO_DATA() macro which are explicitly
handling I/O priority data as a priority level are modified to use the new
IOPRIO_PRIO_LEVEL() macro without any functional change. Since f2fs is the
only user of this macro not explicitly using that value as a priority
level, it is left unchanged.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20230511011356.227789-2-nks@flawful.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mike Christie <michael.christie@oracle.com> says:
The patches in this thread allow us to use the block pr_ops with LIO's
target_core_iblock module to support cluster applications in VMs. They
were built over Linus's tree. They also apply over linux-next and
Martin's tree and Jens's trees.
Currently, to use windows clustering or linux clustering (pacemaker +
cluster labs scsi fence agents) in VMs with LIO and vhost-scsi, you
have to use tcmu or pscsi or use a cluster aware FS/framework for the
LIO pr file. Setting up a cluster FS/framework is pain and waste when
your real backend device is already a distributed device, and pscsi
and tcmu are nice for specific use cases, but iblock gives you the
best performance and allows you to use stacked devices like
dm-multipath. So these patches allow iblock to work like pscsi/tcmu
where they can pass a PR command to the backend module. And then
iblock will use the pr_ops to pass the PR command to the real devices
similar to what we do for unmap today.
The patches are separated in the following groups:
Patch 1 - 2:
- Add block layer callouts for reading reservations and rename reservation
error code.
Patch 3 - 5:
- SCSI support for new callouts.
Patch 6:
- DM support for new callouts.
Patch 7 - 13:
- NVMe support for new callouts.
Patch 14 - 18:
- LIO support for new callouts.
This patchset has been tested with the libiscsi PGR ops and with
window's failover cluster verification test. Note that for scsi
backend devices we need this patchset:
https://lore.kernel.org/linux-scsi/20230123221046.125483-1-michael.christie@oracle.com/T/#m4834a643ffb5bac2529d65d40906d3cfbdd9b1b7
to handle UAs. To reduce the size of this patchset that's being done
separately to make reviewing easier. And to make merging easier this
patchset and the one above do not have any conflicts so can be merged
in different trees.
Link: https://lore.kernel.org/r/20230407200551.12660-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Emails to DC395x list bounce (550 error) and visiting the site returns 404
page.
Drop both twibble.org links. The driver should now be covered by linux-scsi
list.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230510093933.19985-2-bagasdotme@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John has been reviewing libsas patches for years. And I have been
contributing to libsas for years and I am interested in reviewing and
testing libsas patches too. So add a libsas entry and add John and me as
reviewer.
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230516110131.388634-1-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen <chenxiang66@hisilicon.com> says:
This series contains some fixes including:
- Configure initial value of some registers according to HBA model
- Change DMA setup lock timeout from 100ms to 2.5s
- Fix warnings detected by sparse
Link: https://lore.kernel.org/r/1684118481-95908-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DMA setup lock timeout protection is added when DMA setup frames are
received. It's a function outside the protocol and used to prevent SATA
disk I/Os from being delivered for a long time. The default value is 100ms,
it's too strict and easily triggered timeout when the disk is overloaded or
faulty. Based on the average I/O latency of 300 disks, we adjust the value
to 2.5s.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1684118481-95908-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For SAS HBAs of 920 and previous version, we use init_reg_v3_hw() to set
some registers which are related to HW boards. For SAS HBAs of 920B and
later version, those HW registers are set through firmware. And different
HBA models are distinguished through pci_dev->revision.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1684118481-95908-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the ongoing effort to replace all fake flexible arrays with true
flexible arrays, replace the sge32, sge64, and sge_skinny members of union
megasas_sgl with true flexible arrays. No binary differences are seen after
this change; sizes were already being manually calculated using the member
struct sizes directly.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: megaraidlinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230511220957.never.919-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.4/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.4/scsi-queue
This set of changes consists of:
* Map entire BAR 0. The driver was mapping up to and including the
controller registers, but not all of BAR 0.
* Add PCI IDs to support new controllers.
* Clean up some code by removing unnecessary NULL checks. This cleanup is
a result of a Coverity report.
* Correct a rare memory leak whenever pqi_sas_port_add_rhpy() returns an
error. This was Suggested by: Yang Yingliang <yangyingliang@huawei.com>
* Remove atomic operations on variable raid_bypass_cnt. Accuracy is not
required for driver operation. Change type from atomic_t to unsigned
int.
* Correct a rare drive hot-plug removal issue where we get a NULL
io_request. We added a check for this condition.
* Turn on NCQ priority for AIO requests to disks comprising RAID devices.
* Correct byte aligned writew() operations on some ARM servers. Changed
the writew() to two writeb() operations.
* Change how the driver checks for a sanitize operation in progress. We
were using TEST UNIT READY. We removed the TEST UNIT READY code and are
now using the controller's firmware information in order to avoid issues
caused by drives failing to complete TEST UNIT READY.
* Some customers have been requesting that we add the NUMA node to
/sys/block/sd<scsi device>/device like the nvme driver does.
* Update the copyright information to match the current year.
* Bump the driver version to 2.1.22-040.
Link: https://lore.kernel.org/r/20230428153712.297638-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pranav Prasad <pranavpp@google.com> says:
This patch series enhances debug logs for pm80xx HW events, and provides a
minor fix in the case of a hard reset. The log enhancement involves changing
the log severity level to enable logging for HW events which consequently
help debug disk discovery issues.
1. Changed log severity level from MSG to EVENT for HW events. Enhanced
the HW event logs by adding the phyid.
2. Enabled INIT logging.
3. Log portid along with the PHY_UP event.
4. Print phyid and portid sent as part of device registration request.
5. Log port state during HW events.
6. Update phy_state and phy_attached to correct values after a hard reset.
Link: https://lore.kernel.org/r/20230418190101.696345-1-pranavpp@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali <njavali@marvell.com> says:
Please apply the qla2xxx driver enhancement and bug fixes to the scsi tree
at your earliest convenience.
Link: https://lore.kernel.org/r/20230428075339.32551-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.12
This patch set contains fixes flagged by code analyzer tools, introduces a
new CQE status to handle DMA errors, and replaces the usage of blk
interrupts with threaded interrupts.
The patches were cut against Martin's 6.4/scsi-queue tree.
Link: https://lore.kernel.org/r/20230417191558.83100-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is already a test for "if (val == state)" earlier so it's not
possible here. Delete the dead code.
Fixes: 9006e3986f ("scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/68fce64f-4970-45f1-807e-6c0eecdfcdc2@kili.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Smatch reported:
drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues()
warn: missing unwind goto?
At this point in the function, nothing has been allocated so we can return
directly. In particular the "qedf->global_queues" have not been allocated
so calling qedf_free_global_queues() will lead to a NULL dereference when
we check if (!gl[i]) and "gl" is NULL.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Jinhong Zhu <jinhongzhu@hust.edu.cn>
Link: https://lore.kernel.org/r/20230502140022.2852-1-jinhongzhu@hust.edu.cn
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mcq_mode_ops uses only param_{set,get}_bool(). Therefore, convert
module_param_cb() to module_param() and remove the mcq_mode_ops.
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230427094420epcms2p1043333a3e0c0cf58e66164e0b83b3b02@epcms2p1
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-13-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyright to current year.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-12-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although NUMA node is a PCIe device level attribute, it was requested the
NUMA node be added for each exposed device similar to NVMe disks.
Example for NVMe:
/sys/block/nvme1c1n1/device/numa_node
Example for smartpqi:
/sys/block/sdh/device/numa_node
cat /sys/block/sdh/device/numa_node
0
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-11-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stop sending driver-initiated TURs to physical devices during driver
load/rescan.
Note: This does not affect SML initiated TURs.
Some Linux kernels can cause lengthy delays in OS boot if the kernel
detects that a drive is being sanitized/erased. We were using TURs to
detect if a sanitize/erase was in progress.
Some devices do not return the TUR in a timely manner, causing driver
load/rescan stalls.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-10-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct OOPs on ARM servers during driver init.
The driver attempts to update FW with max_feature_supported value using a
writew() kernel call using a byte aligned address. This fails on some ARM
systems.
Change the writew() to two writeb() calls to update this value.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-9-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable NCQ priority feature for the RAID path when AIO path is disabled.
Move function pqi_is_io_high_priority() up to avoid adding a prototype.
Remove unused argument ctrl_info.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-8-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent OS crashes when a drive is hot removed during I/O stress test.
The I/O request pointer can be invalid if block layer provides incorrect
multi-queue host tag. This can lead to invalid I/O request pointer
dereference.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-7-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reduce CPU contention when incrementing variable raid_bypass_cnt.
Remove the atomic operations for this variable by changing the atomic to an
unsigned int and replace atomic operations with standard operations. The
value is only checked that it is increasing and accuracy is not required.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Free rphy when pqi_sas_port_add_rphy() returns an error.
If pqi_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed.
It should be noted that no issues were ever reported.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Suggested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove an unnecessary check for a NULL pointer. This unnecessary check was
flagged by Coverity.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Map full length of PCI BAR 0 at driver init.
During driver initialization, the driver must make a kernel call to map the
controller registers into kernel address space. A parameter to this call
is the length of the memory to be mapped. The driver was specifying the
wrong length.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20230428153712.297638-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update version to 10.02.08.300-k.
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230428075339.32551-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230428075339.32551-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
System crash, where driver is accessing scsi layer's
memory (scsi_cmnd->device->host) to search for a well known internal
pointer (vha). The scsi_cmnd was released back to upper layer which
could be freed, but the driver is still accessing it.
7 [ffffa8e8d2c3f8d0] page_fault at ffffffff86c010fe
[exception RIP: __qla2x00_eh_wait_for_pending_commands+240]
RIP: ffffffffc0642350 RSP: ffffa8e8d2c3f988 RFLAGS: 00010286
RAX: 0000000000000165 RBX: 0000000000000002 RCX: 00000000000036d8
RDX: 0000000000000000 RSI: ffff9c5c56535188 RDI: 0000000000000286
RBP: ffff9c5bf7aa4a58 R8: ffff9c589aecdb70 R9: 00000000000003d1
R10: 0000000000000001 R11: 0000000000380000 R12: ffff9c5c5392bc78
R13: ffff9c57044ff5c0 R14: ffff9c56b5a3aa00 R15: 00000000000006db
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
8 [ffffa8e8d2c3f9c8] qla2x00_eh_wait_for_pending_commands at ffffffffc0646dd5 [qla2xxx]
9 [ffffa8e8d2c3fa00] __qla2x00_async_tm_cmd at ffffffffc0658094 [qla2xxx]
Remove access of freed memory. Currently the driver was checking to see if
scsi_done was called by seeing if the sp->type has changed. Instead,
check to see if the command has left the oustanding_cmds[] array as
sign of scsi_done was called.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230428075339.32551-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Task management command hangs where a side
band chip reset failed to nudge the TMF
from it's current send path.
Add additional error check to block TMF
from entering during chip reset and along
the TMF path to cause it to bail out, skip
over abort of marker.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230428075339.32551-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Task management cmd failed with status 30h which means
FW is not able to finish processing one task management
before another task management for the same lun.
Hence add wait for completion of marker to space it out.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304271802.uCZfwQC1-lkp@intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230428075339.32551-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To be consistent with sas_check_edge_expander_topo(), factor out
sas_check_fanout_expander_topo(). And remove the comment since we are not
spilling over 80 colums now.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230421093744.1583609-4-yanaijie@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is an empty "all good" branch in sas_check_parent_topology(). We can
reverse the test statement and remove the empty branch.
Moreover, factor out a helper sas_check_edge_expander_topo() to make the
code more readable.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230421093744.1583609-3-yanaijie@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In sas_check_eeds() there is an empty branch. We can reverse the test
expression and then remove the empty branch. Also the test expression is a
little bit complex so it deserves an individual function. And make the
continuing prototype lines indented after the opening parenthesis to follow
the standard coding style.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230421093744.1583609-2-yanaijie@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
