A splice with MSG_SPLICE_PAGES will cause tls code to use the
tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user
provided pages from the msg into the msg_pl. This will loop over the
msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user
can also set the MORE flag to hint stack to delay sending until receiving
more pages and ideally a full buffer.
If the user adds more pages to the msg than can fit in the msg_pl
scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send
the buffer anyways.
What actually happens though is we abort the msg to msg_pl scatterlist
setup and then because we forget to set 'full record' indicating we
can no longer consume data without a send we fallthrough to the 'continue'
path which will check if msg_data_left(msg) has more bytes to send and
then attempts to fit them in the already full msg_pl. Then next
iteration of sender doing send will encounter a full msg_pl and throw
the warning in the syzbot report.
To fix simply check if we have a full_record in splice code path and
if not send the msg regardless of MORE flag.
Reported-and-tested-by: syzbot+f2977222e0e95cec15c8@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis <eadavis@qq.com>
Fixes: fe1e81d4f7 ("tls/sw: Support MSG_SPLICE_PAGES")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The curr pointer must also be updated on the splice similar to how
we do this for other copy types.
Fixes: d829e9c411 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.
It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().
Fixes: df720d288d ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to commit 1a074f7618 ("tls: also use init_prot_info in
tls_set_device_offload"), setting TLS_HW on TX didn't touch
prot->aad_size and prot->tail_size. They are set to 0 during context
allocation (tls_prot_info is embedded in tls_context, kzalloc'd by
tls_ctx_create).
When the RX key is configured, tls_set_sw_offload is called (for both
TLS_SW and TLS_HW). If the TX key is configured in TLS_HW mode after
the RX key has been installed, init_prot_info will now overwrite the
correct values of aad_size and tail_size, breaking SW decryption and
causing -EBADMSG errors to be returned to userspace.
Since TLS_HW doesn't use aad_size and tail_size at all (for TLS1.2,
tail_size is always 0, and aad_size is equal to TLS_HEADER_SIZE +
rec_seq_size), we can simply drop this hunk.
Fixes: 1a074f7618 ("tls: also use init_prot_info in tls_set_device_offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/979d2f89a6a994d5bb49cae49a80be54150d094d.1697653889.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not really needed since we end up refetching it as tls_ctx. We
can also remove the NULL check, since we have already dereferenced ctx
in do_tls_setsockopt_conf.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most values are shared. Nonce size turns out to be equal to IV size
for all offloadable ciphers.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify tls_set_sw_offload, and allow reuse for the tls_device code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: b89fec54fd ("tls: rx: wrap decrypt params in a struct")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I got the below warning when do fuzzing test:
BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470
Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9
CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G OE
Hardware name: linux,dummy-virt (DT)
Workqueue: pencrypt_parallel padata_parallel_worker
Call trace:
dump_backtrace+0x0/0x420
show_stack+0x34/0x44
dump_stack+0x1d0/0x248
__kasan_report+0x138/0x140
kasan_report+0x44/0x6c
__asan_load4+0x94/0xd0
scatterwalk_copychunks+0x320/0x470
skcipher_next_slow+0x14c/0x290
skcipher_walk_next+0x2fc/0x480
skcipher_walk_first+0x9c/0x110
skcipher_walk_aead_common+0x380/0x440
skcipher_walk_aead_encrypt+0x54/0x70
ccm_encrypt+0x13c/0x4d0
crypto_aead_encrypt+0x7c/0xfc
pcrypt_aead_enc+0x28/0x84
padata_parallel_worker+0xd0/0x2dc
process_one_work+0x49c/0xbdc
worker_thread+0x124/0x880
kthread+0x210/0x260
ret_from_fork+0x10/0x18
This is because the value of rec_seq of tls_crypto_info configured by the
user program is too large, for example, 0xffffffffffffff. In addition, TLS
is asynchronously accelerated. When tls_do_encryption() returns
-EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow,
skmsg is released before the asynchronous encryption process ends. As a
result, the UAF problem occurs during the asynchronous processing of the
encryption module.
If the operation is asynchronous and the encryption module returns
EINPROGRESS, do not free the record information.
Fixes: 635d939817 ("net/tls: free record only on encryption error")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tls_cipher_desc also contains the algorithm name needed by
crypto_alloc_aead, use it.
Finally, use get_cipher_desc to check if the cipher_type coming from
userspace is valid, and remove the cipher_type switch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/53d021d80138aa125a9cef4468aa5ce531975a7b.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can get rid of some local variables, but we have to keep nonce_size
because tls1.3 uses nonce_size = 0 for all ciphers.
We can also drop the runtime sanity checks on iv/rec_seq/tag size,
since we have compile time checks on those values.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/deed9c4430a62c31751a72b8c03ad66ffe710717.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When flushing the backlog after decoding a record we don't really
know how much data the caller want us to evaluate, so use INT_MAX
and 0 as arguments to tls_read_flush_backlog() to ensure we flush
at 128k of data. Otherwise we might be reading too much data and
trigger a TCP window full.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20230807071022.10091-1-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement ->read_sock() function for use with nvme-tcp.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Cc: Boris Pismenny <boris.pismenny@gmail.com>
Link: https://lore.kernel.org/r/20230726191556.41714-7-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split tls_rx_reader_{lock,unlock} into an 'acquire/release' and
the actual locking part.
With that we can use the tls_rx_reader_lock in situations where
the socket is already locked.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230726191556.41714-6-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_sw_sendmsg() already handles MSG_MORE, but bails
out on MSG_EOR.
Seeing that MSG_EOR is basically the opposite of
MSG_MORE this patch adds handling MSG_EOR by treating
it as the negation of MSG_MORE.
And erroring out if MSG_EOR is specified with MSG_MORE.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230726191556.41714-2-hare@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert tls_sw_sendpage() and tls_sw_sendpage_locked() to use sendmsg()
with MSG_SPLICE_PAGES rather than directly splicing in the pages itself.
[!] Note that tls_sw_sendpage_locked() appears to have the wrong locking
upstream. I think the caller will only hold the socket lock, but it
should hold tls_ctx->tx_lock too.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make TLS's sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator if possible.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow splice to end a TLS record after prematurely ending a splice/sendfile
due to getting an EOF condition (->splice_read() returned 0) after splice
had called TLS with a sendmsg() with MSG_MORE set when the user didn't set
MSG_MORE.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow MSG_SPLICE_PAGES to be specified to sendmsg() but treat it as normal
sendmsg for now. This means the data will just be copied until
MSG_SPLICE_PAGES is handled.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most protos' poll() methods insert a memory barrier between
writes to sk_err and sk_error_report(). This dates back to
commit a4d258036e ("tcp: Fix race in tcp_poll").
I guess we should do the same thing in TLS, tcp_poll() does
not hold the socket lock.
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.
We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.
Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gaurav reports that TLS Rx is broken with async crypto
accelerators. The commit under fixes missed updating
the retval byte counting logic when updating how records
are stored. Even tho both before and after the change
'decrypted' was updated inside the main loop, it was
completely overwritten when processing the async
completions. Now that the rx_list only holds
non-zero-copy records we need to add, not overwrite.
Reported-and-bisected-by: Gaurav Jain <gaurav.jain@nxp.com>
Fixes: cbbdee9918 ("tls: rx: async: don't put async zc on the list")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217064
Tested-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227181201.1793772-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
The function tls_encrypt_done only uses aead_req to get ahold of
the tls_rec object. So we could pass that in instead of aead_req
to simplify the code.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_async_request passed to the completion is not guaranteed
to be the original request object. Only the data field can be relied
upon.
Fix this by storing the socket pointer with the AEAD request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tls_is_tx_ready() checks that list_first_entry() does not return NULL.
This condition can never happen. For empty lists, list_first_entry()
returns the list_entry() of the head, which is a type confusion.
Use list_first_entry_or_null() which returns NULL in case of empty
lists.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-tls-v1-1-525bbfe6f0d0@diag.uniroma1.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When redirecting, we use sk_msg_to_ingress() to get the BPF_F_INGRESS
flag from the msg->flags. If apply_bytes is used and it is larger than
the current data being processed, sk_psock_msg_verdict() will not be
called when sendmsg() is called again. At this time, the msg->flags is 0,
and we lost the BPF_F_INGRESS flag.
So we need to save the BPF_F_INGRESS flag in sk_psock and use it when
redirection.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1669718441-2654-3-git-send-email-yangpc@wangsu.com
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I went too far in the accessor conversion, we can't use tls_strp_msg()
after decryption because the message may not be ready. What we care
about on this path is that the output skb is detached, i.e. we didn't
somehow just turn around and used the input skb with its TCP data
still attached. So look at the anchor directly.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric indicates that restarting rcvtimeo on every wait may be fine.
I thought that we should consider it cumulative, and made
tls_rx_reader_lock() return the remaining timeo after acquiring
the reader lock.
tls_rx_rec_wait() gets its timeout passed in by value so it
does not keep track of time previously spent.
Make the lock waiting consistent with tls_rx_rec_wait() - don't
keep track of time spent.
Read the timeo fresh in tls_rx_rec_wait().
It's unclear to me why callers are supposed to cache the value.
Link: https://lore.kernel.org/all/CANn89iKcmSfWgvZjzNGbsrndmCch2HC_EPZ7qmGboDNaWoviNQ@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS is a relatively poor fit for strparser. We pause the input
every time a message is received, wait for a read which will
decrypt the message, start the parser, repeat. strparser is
built to delineate the messages, wrap them in individual skbs
and let them float off into the stack or a different socket.
TLS wants the data pages and nothing else. There's no need
for TLS to keep cloning (and occasionally skb_unclone()'ing)
the TCP rx queue.
This patch uses a pre-allocated skb and attaches the skbs
from the TCP rx queue to it as frags. TLS is careful never
to modify the input skb without CoW'ing / detaching it first.
Since we call TCP rx queue cleanup directly we also get back
the benefit of skb deferred free.
Overall this results in a 6% gain in my benchmarks.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The non-zero-copy path assumes a full skb with decrypted contents.
This means the device offload would have to CoW the data. Try
to keep the zero-copy status instead, copy the data to user space.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the future we'll want to reuse the input skb in case of
zero-copy so we shouldn't always free darg.skb. Move the
freeing of darg.skb into the non-zc cases. All cases will
now free ctx->recv_pkt (inside let tls_rx_rec_done()).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After recent changes the SW side of tls_rx_one_record() can
be nicely encapsulated in its own function. Move the pad handling
as well. This will be useful for ->zc handling in tls_decrypt_device().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
