mirror of
https://github.com/torvalds/linux
synced 2024-09-06 09:51:23 +00:00
271 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
2d9db778dd |
Timers and timekeeping updates:
- Core code: - Make timekeeping and VDSO time readouts resilent against math overflow: In guest context the kernel is prone to math overflow when the host defers the timer interrupt due to overload, malfunction or malice. This can be mitigated by checking the clocksource delta for the maximum deferrement which is readily available. If that value is exceeded then the code uses a slowpath function which can handle the multiplication overflow. This functionality is enabled unconditionally in the kernel, but made conditional in the VDSO code. The latter is conditional because it allows architectures to optimize the check so it is not causing performance regressions. On X86 this is achieved by reworking the existing check for negative TSC deltas as a negative delta obviously exceeds the maximum deferrement when it is evaluated as an unsigned value. That avoids two conditionals in the hotpath and allows to hide both the negative delta and the large delta handling in the same slow path. - Add an initial minimal ktime_t abstraction for Rust - The usual boring cleanups and enhancements - Drivers: - Boring updates to device trees and trivial enhancements in various drivers. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmZBErUTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZVhD/9iUPzcGNgqGqcO1bXy6dH4xLpeec6o 2En1vg45DOaygN7DFxkoei20KJtfdFeaaEDH8UqmOfPcpLIuVAd0yqhgDQtx6ZcO XNd09SFDInzUt1Ot/WcoXp5N6Wt3vyEgUAlIN1fQdbaZ3fh6OhGhXXCRfiRCGXU1 ea2pSunLuRf1pKU0AYhGIexnZMOHC4NmVXw/m+WNw5DJrmWB+OaNFKfMoQjtQ1HD Vgyr2RALHnIeXm60y2j3dD7TWGXICE/edzOd7pEyg5LFXsmcp388eu/DEdOq3OTV tsHLgIi05GJym3dykPBVwZk09M5oVNNfkg9zDxHWhSLkEJmc4QUaH3dgM8uBoaRW pS3LaO3ePxWmtAOdSNKFY6xnl6df+PYJoZcIF/GuXgty7im+VLK9C4M05mSjey00 omcEywvmGdFezY6D9MmjjhFa+q2v9zpRjFpCWaIv3DQdAaDPrOzBk4SSqHZOV4lq +hp7ar1mTn1FPrXBouwyOgSOUANISV5cy/QuwOtrVIuVR4rWFVgfWo/7J32/q5Ik XBR0lTdQy1Biogf6xy0HCY+4wItOLTqEXXqeknHSMJpDzj5uZglZemgKbix1wVJ9 8YlD85Q7sktlPmiLMKV9ra0MKVyXDoIrgt4hX98A8M12q9bNdw23x0p0jkJHwGha ZYUyX+XxKgOJug== =pL+S -----END PGP SIGNATURE----- Merge tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers and timekeeping updates from Thomas Gleixner: "Core code: - Make timekeeping and VDSO time readouts resilent against math overflow: In guest context the kernel is prone to math overflow when the host defers the timer interrupt due to overload, malfunction or malice. This can be mitigated by checking the clocksource delta for the maximum deferrement which is readily available. If that value is exceeded then the code uses a slowpath function which can handle the multiplication overflow. This functionality is enabled unconditionally in the kernel, but made conditional in the VDSO code. The latter is conditional because it allows architectures to optimize the check so it is not causing performance regressions. On X86 this is achieved by reworking the existing check for negative TSC deltas as a negative delta obviously exceeds the maximum deferrement when it is evaluated as an unsigned value. That avoids two conditionals in the hotpath and allows to hide both the negative delta and the large delta handling in the same slow path. - Add an initial minimal ktime_t abstraction for Rust - The usual boring cleanups and enhancements Drivers: - Boring updates to device trees and trivial enhancements in various drivers" * tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC rust: time: doc: Add missing C header links clocksource: Make the int help prompt unit readable in ncurses hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active() timerqueue: Remove never used function timerqueue_node_expires() rust: time: Add Ktime vdso: Fix powerpc build U64_MAX undeclared error clockevents: Convert s[n]printf() to sysfs_emit() clocksource: Convert s[n]printf() to sysfs_emit() clocksource: Make watchdog and suspend-timing multiplication overflow safe timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow timekeeping: Make delta calculation overflow safe timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety timekeeping: Fold in timekeeping_delta_to_ns() timekeeping: Consolidate timekeeping helpers timekeeping: Refactor timekeeping helpers ... |
||
![]() |
8f5b5f7811 |
Rust changes for v6.10
The most notable change is the drop of the 'alloc' in-tree fork. This is nicely reflected in the diffstat as a ~10k lines drop. In turn, this makes the version upgrades way simpler and smaller in the future, e.g. the latest one in commit |
||
![]() |
97ab3e8eec |
rust: alloc: fix dangling pointer in VecExt<T>::reserve()
Currently, a Vec<T>'s ptr value, after calling Vec<T>::new(), is
initialized to Unique::dangling(). Hence, in VecExt<T>::reserve(), we're
passing a dangling pointer (instead of NULL) to krealloc() whenever a new
Vec<T>'s backing storage is allocated through VecExt<T> extension
functions.
This only works as long as align_of::<T>(), used by Unique::dangling() to
derive the dangling pointer, resolves to a value between 0x0 and
ZERO_SIZE_PTR (0x10) and krealloc() hence treats it the same as a NULL
pointer however.
This isn't a case we should rely on, since there may be types whose
alignment may exceed the range still covered by krealloc(), plus other
kernel allocators are not as tolerant either.
Instead, pass a real NULL pointer to krealloc_aligned() if Vec<T>'s
capacity is zero.
Fixes:
|
||
![]() |
00280272a0 |
rust: kernel: remove redundant imports
Rust's `unused_imports` lint covers both unused and redundant imports. In the upcoming 1.78.0, the lint detects more cases of redundant imports [1], e.g.: error: the item `bindings` is imported redundantly --> rust/kernel/print.rs:38:9 | 38 | use crate::bindings; | ^^^^^^^^^^^^^^^ the item `bindings` is already defined by prelude Most cases are `use crate::bindings`, plus a few other items like `Box`. Thus clean them up. Note that, in the `bindings` case, the message "defined by prelude" above means the extern prelude, i.e. the `--extern` flags we pass. Link: https://github.com/rust-lang/rust/pull/117772 [1] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240401212303.537355-3-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
7c81aa85ee |
rust: sync: implement Default for LockClassKey
In the upcoming Rust 1.78.0, Clippy suggests to implement `Default` even when `new()` is `const`, since `Default::default()` may call `const` functions even if it is not `const` itself [1]: error: you should consider adding a `Default` implementation for `LockClassKey` --> rust/kernel/sync.rs:31:5 | 31 | / pub const fn new() -> Self { 32 | | Self(Opaque::uninit()) 33 | | } | |_____^ Thus implement it. Link: https://github.com/rust-lang/rust-clippy/pull/10903 [1] Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240401212303.537355-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
4a2ae88051 |
rust: remove unneeded kernel::prelude imports from doctests
Rust doctests implicitly include `kernel::prelude::*`. Removes explicit `kernel::prelude` imports from doctests. Suggested-by: Miguel Ojeda <ojeda@kernel.org> Link: https://github.com/Rust-for-Linux/linux/issues/1064 Signed-off-by: Nell Shamrell-Harrington <nells@linux.microsoft.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240411225331.274662-1-nells@linux.microsoft.com [ Add it back for `module_phy_driver`'s example since it is within a `mod`, and thus it cannot be removed. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
ea175b2d6f |
rust: update dbg!() to format column number
In Rust 1.76.0, the `dbg!()` macro was updated to also format the column number. The reason cited was usage of a few characters worth of horizontal space while allowing direct jumps to the source location. [1] Link: https://github.com/rust-lang/rust/pull/114962 [1] Link: https://github.com/Rust-for-Linux/linux/issues/1065 Signed-off-by: Raghav Narang <dev@raxyte.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/eba70259-9b10-4bf7-ac4f-d7accf6b8891@smtp-relay.sendinblue.com [ Fixed commit author name and removed spurious newline in message. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
84373132b8 |
rust: helpers: Fix grammar in comment
s/directly the bindings/the bindings directly/ Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240411205428.537700-1-thorsten.blum@toblux.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
9218cf826f |
rust: init: change the generated name of guard variables
The initializers created by the `[try_][pin_]init!` macros utilize the guard pattern to drop already initialized fields, when initialization fails mid-way. These guards are generated to have the same name as the field that they handle. To prevent namespacing issues [1] when the field name is the same as e.g. a constant name, add `__` as a prefix and `_guard` as the suffix. [ Gary says: "Here's the simplified example: ``` macro_rules! f { () => { let a = 1; let _: u32 = a; } } const a: u64 = 1; fn main() { f!(); } ``` The `a` in `f` have a different hygiene so normally it is scoped to the macro expansion and wouldn't escape. Interestingly a constant is still preferred despite the hygiene so constants escaped into the macro, leading to the error." - Miguel ] Signed-off-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/rust-for-linux/1e8a2a1f-abbf-44ba-8344-705a9cbb1627@proton.me/ [1] Link: https://lore.kernel.org/r/20240403194321.88716-1-benno.lossin@proton.me [ Added Benno's link and Gary's simplified example. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
a0a4e17013 |
rust: sync: add Arc::into_unique_or_drop
Decrement the refcount of an `Arc`, but handle the case where it hits zero by taking ownership of the now-unique `Arc`, instead of destroying and deallocating it. This is a dependency of the linked list that Rust Binder uses. The linked list uses this method as part of its `ListArc` abstraction [1]. Boqun Feng has authored the examples. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240402-linked-list-v1-1-b1c59ba7ae3b@google.com [1] Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-2-54db6440a9a9@google.com [ Replace `try_new` with `new` in example since we now have the new allocation APIs. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
51f6af86de |
rust: sync: add ArcBorrow::from_raw
Allows access to a value in an `Arc` that is currently held as a raw pointer due to use of `Arc::into_raw`, without destroying or otherwise consuming that raw pointer. This is a dependency of the linked list that Rust Binder uses. The linked list uses this method when iterating over the linked list [1]. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240402-linked-list-v1-6-b1c59ba7ae3b@google.com [1] Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-1-54db6440a9a9@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
be2ca1e039 |
rust: types: Make Opaque::get const
To support a potential usage: static foo: Opaque<Foo> = ..; // Or defined in an extern block. ... fn bar() { let ptr = foo.get(); } `Opaque::get` need to be `const`, otherwise compiler will complain because calls on statics are limited to const functions. Also `Opaque::get` should be naturally `const` since it's a composition of two `const` functions: `UnsafeCell::get` and `ptr::cast`. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240401214543.1242286-1-boqun.feng@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
ddd9120983 |
rust: time: doc: Add missing C header links
The definitions related to jiffies are at linux/jiffies.h, and the definitions related to ktime_t are at linux/ktime.h, since `kernel::time` provides the functionality dealing with jiffies and ktime_t, it makes sense to add links to them from Rust's time module. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20240411230801.1504496-2-boqun.feng@gmail.com |
||
![]() |
19843452dc |
rust: remove params from module macro example
Remove argument `params` from the `module` macro example, because the
macro does not currently support module parameters since it was not sent
with the initial merge.
Signed-off-by: Aswin Unnikrishnan <aswinunni01@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org
Fixes:
|
||
![]() |
50cfe93b01 |
kbuild: rust: remove unneeded @rustc_cfg to avoid ICE
When KUnit tests are enabled, under very big kernel configurations
(e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]:
RUSTDOC TK rust/kernel/lib.rs
error: the compiler unexpectedly panicked. this is a bug.
The reason is that this build step has a duplicated `@rustc_cfg` argument,
which contains the kernel configuration, and thus a lot of arguments. The
factor 2 happens to be enough to reach the ICE.
Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the
command and workaround the ICE.
The ICE has been fixed in the upcoming Rust 1.79 [2].
Cc: stable@vger.kernel.org
Fixes:
|
||
![]() |
323617f649 |
rust: kernel: require Send for Module implementations
The thread that calls the module initialisation code when a module is loaded is not guaranteed [in fact, it is unlikely] to be the same one that calls the module cleanup code on module unload, therefore, `Module` implementations must be `Send` to account for them moving from one thread to another implicitly. Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Cc: stable@vger.kernel.org # 6.8.x: |
||
![]() |
df70d04d56 |
rust: phy: implement Send for Registration
In preparation for requiring `Send` for `Module` implementations in the next patch. Cc: FUJITA Tomonori <fujita.tomonori@gmail.com> Cc: Trevor Gross <tmgross@umich.edu> Cc: netdev@vger.kernel.org Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
2c1092853f |
rust: kernel: remove usage of allocator_api unstable feature
With the adoption of `BoxExt` and `VecExt`, we don't need the functions provided by this feature (namely the methods prefixed with `try_` and different allocator per collection instance). We do need `AllocError`, but we define our own as it is a trivial empty struct. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-11-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
c34aa00d1d |
rust: init: update init module to take allocation flags
This is the last component in the conversion for allocators to take allocation flags as parameters. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-10-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
cc41670e06 |
rust: sync: update Arc and UniqueArc to take allocation flags
We also remove the `try_` prefix to align with how `Box` and `Vec` are providing methods now. `init` is temporarily updated with uses of GFP_KERNEL. These will be updated in a subsequent patch to take flags as well. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-9-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
5ab560ce12 |
rust: alloc: update VecExt to take allocation flags
We also rename the methods by removing the `try_` prefix since the names are available due to our usage of the `no_global_oom_handling` config when building the `alloc` crate. Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240328013603.206764-8-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
08d3f54928 |
rust: alloc: introduce the BoxExt trait
Make fallible versions of `new` and `new_uninit` methods available in `Box` even though it doesn't implement them because we build `alloc` with the `no_global_oom_handling` config. They also have an extra `flags` parameter that allows callers to pass flags to the allocator. Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240328013603.206764-7-wedsonaf@gmail.com [ Used `Box::write()` to avoid one `unsafe` block as suggested by Boqun. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
b6a006e21b |
rust: alloc: introduce allocation flags
We'll use them when allocating `Box`, `Arc`, and `UniqueArc` instances, as well as when allocating memory for `Vec` elements. These changes will come in subsequent patches. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-6-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
9d0441bab7 |
rust: alloc: remove our fork of the alloc crate
It is not used anymore as `VecExt` now provides the functionality we depend on. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-5-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
11795ae4cc |
kbuild: use the upstream alloc crate
Switch away from our fork of the `alloc` crate. We remove it altogether in the next commit. Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-4-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
03989773a9 |
rust: alloc: introduce the VecExt trait
Make `try_with_capacity`, `try_push`, and `try_extend_from_slice` methods available in `Vec` even though it doesn't implement them. It is implemented with `try_reserve` and `push_within_capacity`. This is in preparation for switching to the upstream `alloc` crate. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Suggested-by: Gary Guo <gary@garyguo.net> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-3-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
31d94d8f58 |
rust: kernel: move allocator module under alloc
We will add more to the `alloc` module in subsequent patches (e.g., allocation flags and extension traits). Reviewed-by: Benno Lossin <benno.lossin@proton.me> Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Link: https://lore.kernel.org/r/20240328013603.206764-2-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
7044dcff83 |
rust: macros: fix soundness issue in module! macro
The `module!` macro creates glue code that are called by C to initialize
the Rust modules using the `Module::init` function. Part of this glue
code are the local functions `__init` and `__exit` that are used to
initialize/destroy the Rust module.
These functions are safe and also visible to the Rust mod in which the
`module!` macro is invoked. This means that they can be called by other
safe Rust code. But since they contain `unsafe` blocks that rely on only
being called at the right time, this is a soundness issue.
Wrap these generated functions inside of two private modules, this
guarantees that the public functions cannot be called from the outside.
Make the safe functions `unsafe` and add SAFETY comments.
Cc: stable@vger.kernel.org
Reported-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/629
Fixes:
|
||
![]() |
48b7f4d29a |
rust: time: Add Ktime
Introduce a wrapper around `ktime_t` with a few different useful methods. Rust Binder will use these bindings to compute how many milliseconds a transaction has been active for when dumping the current state of the Binder driver. This replicates the logic in C Binder [1]. For a usage example in Rust Binder, see [2]. ktime_get() cannot be safely called in NMI context. This requirement is not checked by these abstractions, but it is intended that klint [3] or a similar tool will be used to check it in the future. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20240322-rust-ktime_ms_delta-v2-1-d98de1f7c282@google.com Link: https://lore.kernel.org/lkml/5ac8c0d09392290be789423f0dd78a520b830fab.1682333709.git.zhangchuang3@xiaomi.com/ [1] Link: https://r.android.com/3004103 [2] Link: https://rust-for-linux.com/klint [3] |
||
![]() |
8db31d3f3b |
rust: workqueue: add #[pin_data] to Work
The previous two patches made it possible to add `#[pin_data]` on structs with default generic parameter values. This patch makes `Work` use `#[pin_data]` and removes an invocation of `pin_init_from_closure`. This function is intended as a low level manual escape hatch, so it is better to rely on the safe `pin_init!` macro. Signed-off-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240309155243.482334-3-benno.lossin@proton.me Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
22eed6068d |
rust: macros: allow generic parameter default values in #[pin_data]
Add support for generic parameters defaults in `#[pin_data]` by using the newly introduced `decl_generics` instead of the `impl_generics`. Before this would not compile: #[pin_data] struct Foo<const N: usize = 0> { // ... } because it would be expanded to this: struct Foo<const N: usize = 0> { // ... } const _: () = { struct __ThePinData<const N: usize = 0> { __phantom: ::core::marker::PhantomData<fn(Foo<N>) -> Foo<N>>, } impl<const N: usize = 0> ::core::clone::Clone for __ThePinData<N> { fn clone(&self) -> Self { *self } } // [...] rest of expansion omitted }; The problem is with the `impl<const N: usize = 0>`, since that is invalid Rust syntax. It should not mention the default value at all, since default values only make sense on type definitions. The new `impl_generics` do not contain the default values, thus generating correct Rust code. This is used by the next commit that puts `#[pin_data]` on `kernel::workqueue::Work`. Signed-off-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240309155243.482334-2-benno.lossin@proton.me Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
9762dca54a |
rust: macros: add decl_generics to parse_generics()
The generic parameters on a type definition can specify default values. Currently `parse_generics()` cannot handle this though. For example when parsing the following generics: <T: Clone, const N: usize = 0> The `impl_generics` will be set to `T: Clone, const N: usize = 0` and `ty_generics` will be set to `T, N`. Now using the `impl_generics` on an impl block: impl<$($impl_generics)*> Foo {} will result in invalid Rust code, because default values are only available on type definitions. Therefore add parsing support for generic parameter default values using a new kind of generics called `decl_generics` and change the old behavior of `impl_generics` to not contain the generic parameter default values. Now `Generics` has three fields: - `impl_generics`: the generics with bounds (e.g. `T: Clone, const N: usize`) - `decl_generics`: the generics with bounds and default values (e.g. `T: Clone, const N: usize = 0`) - `ty_generics`: contains the generics without bounds and without default values (e.g. `T, N`) `impl_generics` is designed to be used on `impl<$impl_generics>`, `decl_generics` for the type definition, so `struct Foo<$decl_generics>` and `ty_generics` whenever you use the type, so `Foo<$ty_generics>`. Here is an example that uses all three different types of generics: let (Generics { decl_generics, impl_generics, ty_generics }, rest) = parse_generics(input); quote! { struct Foo<$($decl_generics)*> { // ... } impl<$impl_generics> Foo<$ty_generics> { fn foo() { // ... } } } The next commit contains a fix to the `#[pin_data]` macro making it compatible with generic parameter default values by relying on this new behavior. Signed-off-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240309155243.482334-1-benno.lossin@proton.me Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
49ceae68a0 |
rust: init: remove impl Zeroable for Infallible
In Rust, producing an invalid value of any type is immediate undefined
behavior (UB); this includes via zeroing memory. Therefore, since an
uninhabited type has no valid values, producing any values at all for it is
UB.
The Rust standard library type `core::convert::Infallible` is uninhabited,
by virtue of having been declared as an enum with no cases, which always
produces uninhabited types in Rust.
The current kernel code allows this UB to be triggered, for example by code
like `Box::<core::convert::Infallible>::init(kernel::init::zeroed())`.
Thus, remove the implementation of `Zeroable` for `Infallible`, thereby
avoiding the unsoundness (potential for future UB).
Cc: stable@vger.kernel.org
Fixes:
|
||
![]() |
a321f3ad0a |
rust: str: add {make,to}_{upper,lower}case() to CString
Add functions to convert a CString to upper- / lowercase, either in-place or by creating a copy of the original CString. Naming follows the one from the Rust stdlib, where functions starting with 'to' create a copy and functions starting with 'make' perform an in-place conversion. This is required by the Nova project (GSP only Rust successor of Nouveau) to convert stringified enum values (representing different GPU chipsets) to strings in order to generate the corresponding firmware paths. See also [1]. Link: https://rust-for-linux.zulipchat.com/#narrow/stream/288089-General/topic/String.20manipulation.20in.20kernel.20Rust [1] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240223163726.12397-1-dakr@redhat.com [ Reworded to fix typo and to make the link use the `Link:` tag. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
b481dd85f5 |
rust: upgrade to Rust 1.77.1
This is the next upgrade to the Rust toolchain, from 1.76.0 to 1.77.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit
|
||
![]() |
d0f0241d8d |
rust: add Module::as_ptr
This allows you to get a raw pointer to THIS_MODULE for use in unsafe code. The Rust Binder RFC uses it when defining fops for the binderfs component [1]. This doesn't really need to go in now - it could go in together with Rust Binder like how it is sent in the Rust Binder RFC. However, the upcoming 1.77.0 release of the Rust compiler introduces a new warning, and applying this patch now will silence that warning. That allows us to avoid adding the #[allow(dead_code)] annotation seen in [2]. Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/ [1] Link: https://lore.kernel.org/all/20240217002717.57507-1-ojeda@kernel.org/ [2] Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240226-module-as-ptr-v1-1-83bc89213113@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
1d35aae78f |
Kbuild updates for v6.9
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmX8HGIVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGYfIQAIl/zEFoNVSHGR4TIvO7SIwkT4MM VAm0W6XRFaXfIGw8HL/MXe+U9jAyeQ9yL9uUVv8PqFTO+LzBbW1X1X97tlmrlQsC 7mdxbA1KJXwkwt4wH/8/EZQMwHr327vtVH4AilSm+gAaWMXaSKAye3ulKQQ2gevz vP6aOcfbHIWOPdxA53cLdSl9LOGrYNczKySHXKV9O39T81F+ko7wPpdkiMWw5LWG ISRCV8bdXli8j10Pmg8jlbevSKl4Z5FG2BVw/Cl8rQ5tBBoCzFsUPnnp9A29G8QP OqRhbwxtkSm67BMJAYdHnhjp/l0AOEbmetTGpna+R06hirOuXhR3vc6YXZxhQjff LmKaqfG5YchRALS1fNDsRUNIkQxVJade+tOUG+V4WbxHQKWX7Ghu5EDlt2/x7P0p +XLPE48HoNQLQOJ+pgIOkaEDl7WLfGhoEtEgprZBuEP2h39xcdbYJyF10ZAAR4UZ FF6J9lDHbf7v1uqD2YnAQJQ6jJ06CvN6/s6SdiJnCWSs5cYRW0fnYigSIuwAgGHZ c/QFECoGEflXGGuqZDl5iXiIjhWKzH2nADSVEs7maP47vapcMWb9gA7VBNoOr5M0 IXuFo1khChF4V2pxqlDj3H5TkDlFENYT/Wjh+vvjx8XplKCRKaSh+LaZ39hja61V dWH7BPecS44h4KXx =tFdl -----END PGP SIGNATURE----- Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig * tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits) kconfig: tests: test dependency after shuffling choices kconfig: tests: add a test for randconfig with dependent choices kconfig: tests: support KCONFIG_SEED for the randconfig runner kbuild: rpm-pkg: add dtb files in kernel rpm kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig() kconfig: check prompt for choice while parsing kconfig: lxdialog: remove unused dialog colors kconfig: lxdialog: fix button color for blackbg theme modpost: fix null pointer dereference kbuild: remove GCC's default -Wpacked-bitfield-compat flag kbuild: unexport abs_srctree and abs_objtree kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 kconfig: remove named choice support kconfig: use linked list in get_symbol_str() to iterate over menus kconfig: link menus to a symbol kbuild: fix inconsistent indentation in top Makefile kbuild: Use -fmin-function-alignment when available alpha: merge two entries for CONFIG_ALPHA_GAMMA alpha: merge two entries for CONFIG_ALPHA_EV4 kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj) ... |
||
![]() |
6d75c6f40a |
arm64 updates for 6.9:
* Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages * Enable Rust on arm64 * Support for the 2023 dpISA extensions (data processing ISA), host only * arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() * Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmXxiSgACgkQa9axLQDI XvHd7hAAjQrQqxJogPT2ahM5/gxct8qTrXpIgX0B1Y7bb5R8ztvOUN9MJNuDyRsj 0s28SSZw387LReM5OUu+U6G/iahcuNAyP/8d9qeac32Tidd255fV3KPEh4C4eC+u 0HeOqLBZ+stmNoa71tBC2K6SmchizhYyYduvRnri8km8K4OMDawHWqWRTXl0PNRT RMVJvZTDJMPfMBFeD4+B7EnSFOoP14tKCw9MZvlbpT2PEV0kINjhCQiojW2jJgqv w36vm/dhwsg1avSzT1xhy3KE+m+7n28+IC/wr1HB7c1WumvYKv7Z84ieCp3PlO3Z owvVO7dKJC6X3RkoY6Kge5p2RHU6poDerDVHYiAvG+Zi57nrDmHyAubskThsGTGR AibSEeJ5nQ0yM6hx7zAIQa5XEo4l0svD1ZM7NynY+5JR44W9cdAH3SnEsvIBMGIf /ja+iZ1W4ZQnIESQXD5uDPSxILfqQ8Ebhdorpw+Qg3rB7OhdTdGSSGQCi6V2PcJH d/ErFO+i0lFRBPJtBbUAN4EEu3HJcVYEoEnVJYQahC+6KyNGLxO+7L6sH0YO7Pag P1LRa6h8ktuBMrbCrOPWdmJYNDYCbb5rRtmcCwO0ItZ4g5tYWp9djFc8pyctCaNB MZxxRrUCNwXTOcFTDiYzyk+JCvpf3EvXfvj8AH+P8BMjFWgqHqw= =KTD/ -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The major features are support for LPA2 (52-bit VA/PA with 4K and 16K pages), the dpISA extension and Rust enabled on arm64. The changes are mostly contained within the usual arch/arm64/, drivers/perf, the arm64 Documentation and kselftests. The exception is the Rust support which touches some generic build files. Summary: - Reorganise the arm64 kernel VA space and add support for LPA2 (at stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range with 4KB and 16KB pages - Enable Rust on arm64 - Support for the 2023 dpISA extensions (data processing ISA), host only - arm64 perf updates: - StarFive's StarLink (integrates one or more CPU cores with a shared L3 memory system) PMU support - Enable HiSilicon Erratum 162700402 quirk for HIP09 - Several updates for the HiSilicon PCIe PMU driver - Arm CoreSight PMU support - Convert all drivers under drivers/perf/ to use .remove_new() - Miscellaneous: - Don't enable workarounds for "rare" errata by default - Clean up the DAIF flags handling for EL0 returns (in preparation for NMI support) - Kselftest update for ptrace() - Update some of the sysreg field definitions - Slight improvement in the code generation for inline asm I/O accessors to permit offset addressing - kretprobes: acquire regs via a BRK exception (previously done via a trampoline handler) - SVE/SME cleanups, comment updates - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled due to gcc silently ignoring -falign-functions=N)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits) Revert "mm: add arch hook to validate mmap() prot flags" Revert "arm64: mm: add support for WXN memory translation attribute" Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512" ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512 kselftest/arm64: Add 2023 DPISA hwcap test coverage kselftest/arm64: Add basic FPMR test kselftest/arm64: Handle FPMR context in generic signal frame parser arm64/hwcap: Define hwcaps for 2023 DPISA features arm64/ptrace: Expose FPMR via ptrace arm64/signal: Add FPMR signal handling arm64/fpsimd: Support FEAT_FPMR arm64/fpsimd: Enable host kernel access to FPMR arm64/cpufeature: Hook new identification registers up to cpufeature docs: perf: Fix build warning of hisi-pcie-pmu.rst perf: starfive: Only allow COMPILE_TEST for 64-bit architectures MAINTAINERS: Add entry for StarFive StarLink PMU docs: perf: Add description for StarFive's StarLink PMU dt-bindings: perf: starfive: Add JH8100 StarLink PMU perf: starfive: Add StarLink PMU support docs: perf: Update usage for target filter of hisi-pcie-pmu ... |
||
![]() |
9187210eee |
Networking changes for 6.9.
Core & protocols ---------------- - Large effort by Eric to lower rtnl_lock pressure and remove locks: - Make commonly used parts of rtnetlink (address, route dumps etc.) lockless, protected by RCU instead of rtnl_lock. - Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback. - Remove locks / serialization in the socket diag interface. - Remove 6 calls to synchronize_rcu() while holding rtnl_lock. - Remove the dev_base_lock, depend on RCU where necessary. - Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults. - Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible. - Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems. - Support TCP_NOTSENT_LOWAT in MPTCP. - Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec. - Support forwarding of ICMP Error messages in IPSec, per RFC 4301. - Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine. - Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks. - Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc. - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets. - Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths). - Speed up scanning for expired routes by keeping a dedicated list. - Speed up "generic" XDP by trying harder to avoid large allocations. - Support attaching arbitrary metadata to netconsole messages. Things we sprinkled into general kernel code -------------------------------------------- - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena). - Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass). Netfilter --------- - Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership. - Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures. BPF --- - Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. - Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs. - Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it. - Extend the BPF verifier to enable static subprog calls in spin lock critical sections. - Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type. - Add support for retrieval of cookies for perf/kprobe multi links. - Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls. - Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects. Wireless -------- - Add SPP (signaling and payload protected) AMSDU support. - Support wider bandwidth OFDMA, as required for EHT operation. Driver API ---------- - Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers. - Define an API for querying per netdev queue statistics from drivers. - IPSec: account in global stats for fully offloaded sessions. - Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code. - Enable Rx hashing (RSS) on GTP protocol fields. Misc ---- - Improvements and refactoring all over networking selftests. - Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies. - Address all missing MODULE_DESCRIPTION() warnings in networking. - Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type". Drivers ------- - Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues - Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support - Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch - PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva. - CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx - WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXv0mgACgkQMUZtbf5S IrtgMxAAuRd+WJW++SENr4KxIWhYO1q6Xcxnai43wrNkan9swD24icG8TYALt4f3 yoT6idQvWReAb5JNlh9rUQz8R7E0nJXlvEFn5MtJwcthx2C6wFo/XkJlddlRrT+j c2xGILwLjRhW65LaC0MZ2ECbEERkFz8xcGfK2SWzUgh6KYvPjcRfKFxugpM7xOQK P/Wnqhs4fVRS/Mj/bCcXcO+yhwC121Q3qVeQVjGS0AzEC65hAW87a/kc2BfgcegD EyI9R7mf6criQwX+0awubjfoIdr4oW/8oDVNvUDczkJkbaEVaLMQk9P5x/0XnnVS UHUchWXyI80Q8Rj12uN1/I0h3WtwNQnCRBuLSmtm6GLfCAwbLvp2nGWDnaXiqryW DVKUIHGvqPKjkOOMOVfSvfB3LvkS3xsFVVYiQBQCn0YSs/gtu4CoF2Nty9CiLPbK tTuxUnLdPDZDxU//l0VArZmP8p2JM7XQGJ+JH8GFH4SBTyBR23e0iyPSoyaxjnYn RReDnHMVsrS1i7GPhbqDJWn+uqMSs7N149i0XmmyeqwQHUVSJN3J2BApP2nCaDfy H2lTuYly5FfEezt61NvCE4qr/VsWeEjm1fYlFQ9dFn4pGn+HghyCpw+xD1ZN56DN lujemau5B3kk1UTtAT4ypPqvuqjkRFqpNV2LzsJSk/Js+hApw8Y= =oY52 -----END PGP SIGNATURE----- Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Large effort by Eric to lower rtnl_lock pressure and remove locks: - Make commonly used parts of rtnetlink (address, route dumps etc) lockless, protected by RCU instead of rtnl_lock. - Add a netns exit callback which already holds rtnl_lock, allowing netns exit to take rtnl_lock once in the core instead of once for each driver / callback. - Remove locks / serialization in the socket diag interface. - Remove 6 calls to synchronize_rcu() while holding rtnl_lock. - Remove the dev_base_lock, depend on RCU where necessary. - Support busy polling on a per-epoll context basis. Poll length and budget parameters can be set independently of system defaults. - Introduce struct net_hotdata, to make sure read-mostly global config variables fit in as few cache lines as possible. - Add optional per-nexthop statistics to ease monitoring / debug of ECMP imbalance problems. - Support TCP_NOTSENT_LOWAT in MPTCP. - Ensure that IPv6 temporary addresses' preferred lifetimes are long enough, compared to other configured lifetimes, and at least 2 sec. - Support forwarding of ICMP Error messages in IPSec, per RFC 4301. - Add support for the independent control state machine for bonding per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled control state machine. - Add "network ID" to MCTP socket APIs to support hosts with multiple disjoint MCTP networks. - Re-use the mono_delivery_time skbuff bit for packets which user space wants to be sent at a specified time. Maintain the timing information while traversing veth links, bridge etc. - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets. - Simplify many places iterating over netdevs by using an xarray instead of a hash table walk (hash table remains in place, for use on fastpaths). - Speed up scanning for expired routes by keeping a dedicated list. - Speed up "generic" XDP by trying harder to avoid large allocations. - Support attaching arbitrary metadata to netconsole messages. Things we sprinkled into general kernel code: - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena). - Rework selftest harness to enable the use of the full range of ksft exit code (pass, fail, skip, xfail, xpass). Netfilter: - Allow userspace to define a table that is exclusively owned by a daemon (via netlink socket aliveness) without auto-removing this table when the userspace program exits. Such table gets marked as orphaned and a restarting management daemon can re-attach/regain ownership. - Speed up element insertions to nftables' concatenated-ranges set type. Compact a few related data structures. BPF: - Add BPF token support for delegating a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. - Introduce bpf_arena which is sparse shared memory region between BPF program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and BPF programs. - Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it. - Extend the BPF verifier to enable static subprog calls in spin lock critical sections. - Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type. - Add support for retrieval of cookies for perf/kprobe multi links. - Support arbitrary TCP SYN cookie generation / validation in the TC layer with BPF to allow creating SYN flood handling in BPF firewalls. - Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects. Wireless: - Add SPP (signaling and payload protected) AMSDU support. - Support wider bandwidth OFDMA, as required for EHT operation. Driver API: - Major overhaul of the Energy Efficient Ethernet internals to support new link modes (2.5GE, 5GE), share more code between drivers (especially those using phylib), and encourage more uniform behavior. Convert and clean up drivers. - Define an API for querying per netdev queue statistics from drivers. - IPSec: account in global stats for fully offloaded sessions. - Create a concept of Ethernet PHY Packages at the Device Tree level, to allow parameterizing the existing PHY package code. - Enable Rx hashing (RSS) on GTP protocol fields. Misc: - Improvements and refactoring all over networking selftests. - Create uniform module aliases for TC classifiers, actions, and packet schedulers to simplify creating modprobe policies. - Address all missing MODULE_DESCRIPTION() warnings in networking. - Extend the Netlink descriptions in YAML to cover message encapsulation or "Netlink polymorphism", where interpretation of nested attributes depends on link type, classifier type or some other "class type". Drivers: - Ethernet high-speed NICs: - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF. - Intel (100G, ice, idpf): - support E825-C devices - nVidia/Mellanox: - support devices with one port and multiple PCIe links - Broadcom (bnxt): - support n-tuple filters - support configuring the RSS key - Wangxun (ngbe/txgbe): - implement irq_domain for TXGBE's sub-interrupts - Pensando/AMD: - support XDP - optimize queue submission and wakeup handling (+17% bps) - optimize struct layout, saving 28% of memory on queues - Ethernet NICs embedded and virtual: - Google cloud vNIC: - refactor driver to perform memory allocations for new queue config before stopping and freeing the old queue memory - Synopsys (stmmac): - obey queueMaxSDU and implement counters required by 802.1Qbv - Renesas (ravb): - support packet checksum offload - suspend to RAM and runtime PM support - Ethernet switches: - nVidia/Mellanox: - support for nexthop group statistics - Microchip: - ksz8: implement PHY loopback - add support for KSZ8567, a 7-port 10/100Mbps switch - PTP: - New driver for RENESAS FemtoClock3 Wireless clock generator. - Support OCP PTP cards designed and built by Adva. - CAN: - Support recvmsg() flags for own, local and remote traffic on CAN BCM sockets. - Support for esd GmbH PCIe/402 CAN device family. - m_can: - Rx/Tx submission coalescing - wake on frame Rx - WiFi: - Intel (iwlwifi): - enable signaling and payload protected A-MSDUs - support wider-bandwidth OFDMA - support for new devices - bump FW API to 89 for AX devices; 90 for BZ/SC devices - MediaTek (mt76): - mt7915: newer ADIE version support - mt7925: radio temperature sensor support - Qualcomm (ath11k): - support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) - QCA6390 & WCN6855: support 2 concurrent station interfaces - QCA2066 support - Qualcomm (ath12k): - refactoring in preparation for Multi-Link Operation (MLO) support - 1024 Block Ack window size support - firmware-2.bin support - support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) - QCN9274: support split-PHY devices - WCN7850: enable Power Save Mode in station mode - WCN7850: P2P support - RealTek: - rtw88: support for more rtw8811cu and rtw8821cu devices - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL - rtlwifi: speed up USB firmware initialization - rtwl8xxxu: - RTL8188F: concurrent interface support - Channel Switch Announcement (CSA) support in AP mode - Broadcom (brcmfmac): - per-vendor feature support - per-vendor SAE password setup - DMI nvram filename quirk for ACEPC W5 Pro" * tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits) nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y nexthop: Fix out-of-bounds access during attribute validation nexthop: Only parse NHA_OP_FLAGS for dump messages that require it nexthop: Only parse NHA_OP_FLAGS for get messages that require it bpf: move sleepable flag from bpf_prog_aux to bpf_prog bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes() selftests/bpf: Add kprobe multi triggering benchmarks ptp: Move from simple ida to xarray vxlan: Remove generic .ndo_get_stats64 vxlan: Do not alloc tstats manually devlink: Add comments to use netlink gen tool nfp: flower: handle acti_netdevs allocation failure net/packet: Add getsockopt support for PACKET_COPY_THRESH net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID selftests/bpf: Add bpf_arena_htab test. selftests/bpf: Add bpf_arena_list test. selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages bpf: Add helper macro bpf_addr_space_cast() libbpf: Recognize __arena global variables. bpftool: Recognize arena map type ... |
||
![]() |
ff887eb07c |
workqueue: Changes for v6.9
This cycle, a lot of workqueue changes including some that are significant and invasive. - During v6.6 cycle, unbound workqueues were updated so that they are more topology aware and flexible, which among other things improved workqueue behavior on modern multi-L3 CPUs. In the process, |
||
![]() |
e2bad142bb |
kbuild: unexport abs_srctree and abs_objtree
Commit |
||
![]() |
768409cff6 |
rust: upgrade to Rust 1.76.0
This is the next upgrade to the Rust toolchain, from 1.75.0 to 1.76.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit
|
||
![]() |
ecab4115c4 |
kbuild: mark rustc (and others) invocations as recursive
`rustc` (like Cargo) may take advantage of the jobserver at any time (e.g. for backend parallelism, or eventually frontend too). In the kernel, we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far), so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a warning is emitted by `rustc` [1] when it cannot connect to the jobserver it was passed (in many cases, but not all: compiling and `--print sysroot` do, but `--version` does not). And given GNU Make always passes the jobserver in the environment variable (even when a line is deemed non-recursive), `rustc` will end up complaining about it (in particular in Make 4.3 where there is only the simple pipe jobserver style). One solution is to remove the jobserver from `MAKEFLAGS`. However, we can mark the lines with calls to `rustc` (and Cargo) as recursive, which looks simpler. This is being documented as a recommendation in `rustc` [2] and allows us to be ready for the time we may use parallelism inside `rustc` (potentially now, if a user passes `-Zthreads`). Thus do so. Similarly, do the same for `rustdoc` and `cargo` calls. Finally, there is one case that the solution does not cover, which is the `$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS` environment variable. Link: https://github.com/rust-lang/rust/issues/120515 [1] Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://github.com/rust-lang/rust/pull/121564 [2] Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org [ Reworded to add link to PR documenting the recommendation. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
e944171070 |
rust: add container_of! macro
This macro is used to obtain a pointer to an entire struct when given a pointer to a field in that struct. Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Matt Gilbride <mattgilbride@google.com> Link: https://lore.kernel.org/r/20240219-b4-rbtree-v2-1-0b113aab330d@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
4951ddd51b |
rust: str: implement Display and Debug for BStr
Currently, `BStr` is just a type alias of `[u8]`, limiting its representation to a byte list rather than a character list, which is not ideal for printing and debugging. Implement `Display` and `Debug` traits for `BStr` to facilitate easier printing and debugging. Also, for this purpose, change `BStr` from a type alias of `[u8]` to a struct wrapper of `[u8]`. Co-developed-by: Virgile Andreani <armavica@ulminfo.fr> Signed-off-by: Virgile Andreani <armavica@ulminfo.fr> Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/ZcSlGMGP-e9HqybA@ohnotp [ Formatted code comment. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
1b6170ff7a |
rust: module: place generated init_module() function in .init.text
Currently Rust kernel modules have their init code placed in the `.text` section of the .ko file. I don't think this causes any real problems for Rust modules as long as all code called during initialization lives in `.text`. However, if a Rust `init_module()` function (that lives in `.text`) calls a function marked with `__init` (in C) or `#[link_section = ".init.text"]` (in Rust), then a warning is generated by modpost because that function lives in `.init.text`. For example: WARNING: modpost: fs/bcachefs/bcachefs: section mismatch in reference: init_module+0x6 (section: .text) -> _RNvXCsj7d3tFpT5JS_15bcachefs_moduleNtB2_8BcachefsNtCsjDtqRIL3JAG_6kernel6Module4init (section: .init.text) I ran into this while experimenting with converting the bcachefs kernel module from C to Rust. The module's `init()`, written in Rust, calls C functions like `bch2_vfs_init()` which are placed in `.init.text`. This patch places the macro-generated `init_module()` Rust function in the `.init.text` section. It also marks `init_module()` as unsafe--now it may not be called after module initialization completes because it may be freed already. Note that this is not enough on its own to actually get all the module initialization code in that section. The module author must still add the `#[link_section = ".init.text"]` attribute to the Rust `init()` in the `impl kernel::Module` block in order to then call `__init` functions. However, this patch enables module authors do so, when previously it would not be possible (without warnings). Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240206153806.567055-1-tahbertschinger@gmail.com [ Reworded title to add prefix. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
5bc818419a |
rust: types: add try_from_foreign() method
Currently `ForeignOwnable::from_foreign()` only works for non-null pointers for the existing `impl`s (e.g. `Box`, `Arc`). In turn, this means callers may write code like: ```rust // `p` is a pointer that may be null. if p.is_null() { None } else { unsafe { Some(Self::from_foreign(ptr)) } } ``` Add a `try_from_foreign()` method to the trait with a default implementation that returns `None` if `ptr` is null, otherwise `Some(from_foreign(ptr))`, so that it can be used by callers instead. Link: https://github.com/Rust-for-Linux/linux/issues/1057 Signed-off-by: Obei Sideg <linux@obei.io> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Link: https://lore.kernel.org/r/0100018d53f737f8-80c1fe97-0019-40d7-ab69-b1b192785cd7-000000@email.amazonses.com [ Fixed intra-doc links, improved `SAFETY` comment and reworded commit. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
44f2e626cb |
rust: kernel: stop using ptr_metadata feature
The `byte_sub` method was stabilized in Rust 1.75.0. By using that method, we no longer need the unstable `ptr_metadata` feature for implementing `Arc::from_raw`. This brings us one step closer towards not using unstable compiler features. Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240215104601.1267763-1-aliceryhl@google.com [ Reworded title. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
e283ee2392 |
rust: kernel: add reexports for macros
Currently, all macros are reexported with #[macro_export] only, which means that to access `new_work!` from the workqueue, you need to import it from the path `kernel::new_work` instead of importing it from the workqueue module like all other items in the workqueue. By adding reexports of the macros, it becomes possible to import the macros from the correct modules. It's still possible to import the macros from the root, but I don't think we can do anything about that. There is no functional change. This is merely a code cleanliness improvement. Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Tested-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20240129145837.1419880-1-aliceryhl@google.com [ Removed new `use kernel::prelude::*`s, reworded title. ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
![]() |
ed6d0bed34 |
rust: locked_by: shorten doclink preview
Increases readability by removing `super::` from the link preview text. Signed-off-by: Valentin Obst <kernel@valentinobst.de> Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-12-0c8af94ed7de@valentinobst.de Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |