The devm managed lifetime is incompatible with 'struct device' objects that
resides in idxd context. This is one of the series that clean up the idxd
driver 'struct device' lifetime. Remove embedding of dma_device and dma_chan
in idxd since it's not the only interface that idxd will use. The freeing of
the dma_device will be managed by the ->release() function.
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/161852983001.2203940.14817017492384561719.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are calls to idxd_cmd_exec that pass a null status pointer however
a recent commit has added an assignment to *status that can end up
with a null pointer dereference. The function expects a null status
pointer sometimes as there is a later assignment to *status where
status is first null checked. Fix the issue by null checking status
before making the assignment.
Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 89e3becd8f ("dmaengine: idxd: check device state before issue command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210415110654.1941580-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add disabling/clearing of MSIX permission entries on device shutdown to
mirror the enabling of the MSIX entries on probe. Current code left the
MSIX enabled and the pasid entries still programmed at device shutdown.
Fixes: 8e50d39265 ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the first list_for_each_entry() macro of dma_async_device_register,
it gets the chan from list and calls __dma_async_device_channel_register
(..,chan). We can see that chan->local is allocated by alloc_percpu() and
it is freed chan->local by free_percpu(chan->local) when
__dma_async_device_channel_register() failed.
But after __dma_async_device_channel_register() failed, the caller will
goto err_out and freed the chan->local in the second time by free_percpu().
The cause of this problem is forget to set chan->local to NULL when
chan->local was freed in __dma_async_device_channel_register(). My
patch sets chan->local to NULL when the callee failed to avoid double free.
Fixes: d2fb0a0438 ("dmaengine: break out channel registration")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.
Fixes: dbde5c2934 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current code blindly writes over the SWERR and the OVERFLOW bits. Write
back the bits actually read instead so the driver avoids clobbering the
OVERFLOW bit that comes after the register is read.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, is missing a null check on a pcim_iomap_table() return value
and this can lead to a null pointer dereference if the desired BAR
wasn't mapped previously.
Fix this by adding a null check and returning -ENOMEM.
Addresses-Coverity: ("Dereference null return")
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/bc5e6b8632c84660bb6dae454980e9419992ed14.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the driver is compiled as a module and loaded if we try to unload
it, the Kernel shows a crash log. This Kernel crash is due to the
dma_async_device_unregister() call done after deleting the channels,
this patch fixes this issue.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/4aa850c035cf7ee488f1d3fb6dee0e37be0dce0a.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Changes the linked list and data blocks offset and sizes to follow the
recommendation given by the hardware team for the IPK solution.
Although the previous data blocks offset and sizes are still valid and
functional, using them that might present some issues related to the IPK
solution, since this solution is based on FPGA and might be subjected to
timmings constrains.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/f682e7f7f06dc6b2efdd431481d6fb4d762c2c05.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the previous implementation, the driver assumed that there existed
only two memory spaces that would equally distribute the amount of
read/write channels.
This might not be the case on some other implementations, therefore this
patch change this requirement so that each write/read channel has
its own linked list and data space well defined, which allows
different sizes and locations.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/2e316cb983f8a1e09ce929029f87619dc92a52de.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the driver code structure, I tried to keep the code style consistency
by writing the write channels instructions first, and then follow by the
read channels instructions, mimicking the hardware implementation.
However, this code style failed in some cases. This patch fixes that and
no functional changes are expected.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/9bd1f86f19df8bb5de502fb85a0c5dc07978a9ba.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the HDMA feature.
This new feature enables the current eDMA IP to use a deeper prefetch
of the linked list, which reduces the algorithm execution latency
observed when loading the elements of the list, causing more stable
and higher data transfer.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/5f40f89ef7d6255a12d5b23f34e6e59dcd28861e.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add writeq() and readq() for 64 bits architures support.
Supporting these two functions will allow the write or the read of eDMA
64 bits registers at once instead of having two consecutive operations.
Also, this improvement will allow the PCI optimization transaction
messages, which will generate a 64 bits message instead of two messages
of 32 bits.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/3f1120f7c6003b38ec8b851fc68936007c4d9fd8.1613674948.git.gustavo.pimentel@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Xilinx dmaengine driver uses a tasklet to process completed
descriptors and execute their callbacks.
Currently consumers of the DMA channel have to no method of synchronization
against this tasklet when using the Xilinx dmaengine drivers. This can lead
to race conditions when the consumer frees resources that are accessed in
the callback before the tasklet has finished running.
It is not enough to just call dmaengine_terminal_all() since on a
multi-processor system the tasklet can run concurrently to it and might
call the callback after dmaengine_terminate_all() has already finished.
To mitigate this issue implement the synchronize() callback for the driver,
which will wait until the tasklet has finished.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210313125311.4823-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The active descriptor pointer is accessed from different contexts,
including different interrupt handlers, and its access must be protected
by the channel's lock. This wasn't done in the done IRQ handler. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When multiple channels are part of a video group, the transfer is
triggered only when all channels in the group are ready. The logic to do
so is incorrect, as it causes the descriptors for all channels but the
last one in a group to not being pushed to the hardware. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
-----BEGIN PGP SIGNATURE-----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=BULT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- Generalise byte swapping assembly
- Update debug addresses for STI
- Validate start of physical memory with DTB
- Do not clear SCTLR.nTLSMD in decompressor
- amba/locomo/sa1111 devices remove method return type is void
- address markers for KASAN in page table dump
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
amba: Make use of bus_type functions
amba: Make the remove callback return void
vfio: platform: simplify device removal
amba: reorder functions
amba: Fix resource leak for drivers without .remove
ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
ARM: 9051/1: vdso: remove unneded extra-y addition
ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
ARM: 9049/1: locomo: make locomo bus's remove callback return void
ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
ARM: 9047/1: smp: remove unused variable
ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
ARM: 9042/1: debug: no uncompress debugging while semihosting
ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
The pointer desc is being null checked twice, the second null check
is redundant because desc has not been re-assigned between the
checks. Remove the redundant second null check on desc.
Fixes: ef6fb2d6f1 ("dmaengine: dw-axi-dmac: simplify descriptor management")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210203134652.22618-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 842067940a.
For some solutions e.g. sound/soc/intel/catpt, DW DMA is part of a
compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0
and DMA1 are part of a single entity) rather than being a standalone
one. Driver for said device may enlist DMA to transfer data during
suspend or resume sequences.
Manipulating RPM explicitly in dw's DMA request and release channel
functions causes suspend() to also invoke resume() for the exact same
device. Similar situation occurs for resume() sequence. Effectively
renders device dysfunctional after first suspend() attempt. Revert the
change to address the problem.
Fixes: 842067940a ("dmaengine: dw: Enable runtime PM")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210203191924.15706-1-cezary.rojewski@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add device state check before executing command. Without the check the
command can be issued while device is in halt state and causes the driver to
block while waiting for the completion of the command.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Fixes: 0d5c10b4c8 ("dmaengine: idxd: add work queue drain support")
Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight
Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Takashi Iwai <tiwai@suse.de> # for sound
Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Use GFP_NOWAIT allocation in xilinx_dma_alloc_tx_descriptor().
This is necessary for compatibility with ALSA, which calls
dmaengine_prep_dma_cyclic() from an atomic context.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210129170800.31857-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AxiDMA driver exposed the dma_set_max_seg_size() to the DMAENGINE.
It shall helps the DMA clients to create size-optimized linked-list
for the controller.
However, there are certain situations where DMA client might not be
abled to benefit from the dma_get_max_seg_size() if the segment size
can't meet the nature of the DMA client's operation.
In the case of ALSA operation, ALSA application and driver expecting
to run in a period of larger than 10ms regardless of the bit depth.
With this large period, there is a strong request to split the linked-list
in the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-18-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.
Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-17-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.
Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.
This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-16-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA device handshake programming.
Device handshake number passed in to the AxiDMA shall be written to
the Intel KeemBay AxiDMA hardware handshake registers before DMA
operations are started.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-15-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay AxiDMA to the .compatible field.
The AxiDMA Apb region will be accessible if the compatible string
matches the "intel,kmb-axi-dma".
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-14-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-12-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.
Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.
Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-10-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.
DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.
Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-9-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.
Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-8-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
