The Realtek rt5640 codec driver can be used with the generic sound card
drivers, so it should be selectable. For example, with the addition
of #sound-dai-cells = <0> property in DT, it can be used with simple and
graph card drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210612200650.1301661-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset adds support to MBHC(Multi Button Headset Control) block found in
Qualcomm WCD codecs. MBHC support headset type detection, both Mechanical and
electrical insert/removal detection along with 8 buttons detection,
Over current interrupts on HPHL/R, Impedance Measurements on HPHL/R.
Eventhough MBHC block supports things like OverCurrent detection, Currently its
reported as a kernel debug message. Should this be reported as an uevent to
userspace? like the way USB reports?
Any suggestions?
First patch adds a common mbhc driver and the second one wcd934x specific driver
changes along with sdm845 soundcard related changes.
Common wcd-mbhc-v2 driver should be reusable across multiple codecs like
WCD9335, WCD934x, WCD937x and WCD938x.
Most of the work is derived from downstream Qualcomm kernels.
Credits to various Qualcomm authors from Patrick Lai's team who have
contributed to this code.
Changes since v2:
- switched to EXPORT_SYMBOL_GPL from EXPORT_SYMBOL
- converted one of the if else to switch case.
Srinivas Kandagatla (4):
ASoC: dt-bindings: wcd934x: add bindings for Headset Button detection
ASoC: codecs: wcd: add multi button Headset detection support
ASoC: codecs: wcd934x: add mbhc support
ASoC: qcom: sdm845: add jack support for WCD934x
.../bindings/sound/qcom,wcd934x.yaml | 30 +
include/linux/mfd/wcd934x/registers.h | 57 +
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/wcd-mbhc-v2.c | 1475 +++++++++++++++++
sound/soc/codecs/wcd-mbhc-v2.h | 340 ++++
sound/soc/codecs/wcd934x.c | 884 +++++++++-
sound/soc/qcom/sdm845.c | 8 +
8 files changed, 2785 insertions(+), 15 deletions(-)
create mode 100644 sound/soc/codecs/wcd-mbhc-v2.c
create mode 100644 sound/soc/codecs/wcd-mbhc-v2.h
--
2.21.0
WCD934x has Multi Button Headset Control hardware to support Headset insertion,
type detection, 8 headset buttons detection, Over Current detection and Impedence
measurements.
This patch adds support for this feature via common mbhc layer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604115230.23259-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Most new Qualcomm WCD codecs support MBHC(Multi Button Headset Control) via ADC.
This patchset adds support to Common parts of this MBHC support so that
WCD codecs need not duplicate them. To do that codec exposes set of
register fields and callbacks to this common driver to control it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604115230.23259-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_LPASS_RX_MACRO=m and CONFIG_REGMAP_MMIO undefined,
build fails with the following error
make -f /var/tmp/portage/sys-kernel/stable-sources-5.12.8/work/linux-5.12.8-stable/scripts/Makefile.modpost
sed 's/\.ko$/\.o/' modules.order | scripts/mod/modpost -E -o modules-only.symvers -i vmlinux.symvers -T -
ERROR: modpost: "__devm_regmap_init_mmio_clk" [sound/soc/codecs/snd-soc-lpass-rx-macro.ko] undefined!
This does also apply to other Qualcomm Macro LPASS all making call to
devm_regmap_init_mmio()
Signed-off-by: Bertrand Jacquin <bertrand@jacquin.bzh>
Link: https://lore.kernel.org/r/20210603221816.2642402-1-bertrand@jacquin.bzh
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason why the arizona core,irq and codec model specific
regmap bits cannot be build as a module. All they do is export symbols
which are used by the arizona-spi/i2c and arizona-codec modules, which
themselves can be built as module.
Change the Kconfig and Makefile arizona bits so that the arizona MFD-core
can be built as a module.
This is especially useful on x86 platforms with a WM5102 codec, this
allows the arizona MFD driver necessary for the WM5102 codec to be
enabled in generic distro-kernels without growing the base kernel-image
size.
Note this also adds an explicit "depends on MFD_ARIZONA" to all the
arizona codec Kconfig options. The codec drivers use functions from mfd
arizona-core. These new depends are necessary to disallow the codec
drivers being builtin when the arizona-core is build as a module,
otherwise we end up with missing symbol errors when building vmlinuz.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for the Rockchip rk817 audio codec integrated into the
rk817 PMIC. This is based on the sources provided by Rockchip from
their BSP kernel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers
used in many smartphones and tablets. Most of them are sold as "smart
amplifiers" with built-in "CoolFlux DSP" that is used for volume control,
plus a "sophisticated speaker-boost and protection algorithm".
Unfortunately, they are also almost entirely undocumented. The short
datasheets (e.g. [1] for TFA9897) describe the available features,
but do not provide any information about the registers or how to use
the "CoolFlux DSP".
The amplifiers are most often configured through proprietary userspace
libraries. There are also some (rather complex) kernel drivers (e.g. [2])
but even those rely on obscure firmware blobs for configuration (so-called
"containers"). They seem to contain different "profiles" with tuned speaker
settings, sample rates and volume steps (which would be better exposed
as separate ALSA mixers).
The format of the firmware files seems to have changed a lot over the time,
so it's not even possible to simply re-use the firmware originally provided
by the vendor.
Overall, it seems close to impossible to develop a proper mainline driver
for these amplifiers that could make proper use of the built-in DSP.
This commit implements a compromise: At least the TFA1 family of the
TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass*
the DSP using a special register sequence. The register sequence can be
found in similar variations in the kernel drivers from lots of vendors
e.g. in [3] and was probably mainly used for factory testing.
With the DSP bypassed, the amplifier acts mostly like a dumb standard
speaker amplifier, without (hardware) volume control. However, the setup
is much simpler and it works without any obscure firmware.
This driver implements the DSP bypass combined with chip-specific
initialization sequences adapted from [2]. Only TFA9895 is supported in
this initial commit. Except for the lack of volume control I can not hear
any difference with or without the DSP, it works just fine.
This driver allows the speaker to work on mainline Linux running on the
Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897].
TFA9897 support will be added in separate patch set later.
[1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78
[2]: https://source.codeaurora.org/external/mas/tfa98xx
[3]: 57b5050e34/sound/soc/codecs/tfa98xx.c (L1422-L1462)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In 61fbeb5 the sirf prima/atlas drivers were removed. This cleans
up a stray header and some Kconfig entries for the codec that
were missed in the process.
Fixes: 61fbeb5dcb (ASoC: remove sirf prima/atlas drivers)
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210307162338.1160604-1-pbrobinson@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
TX macro block which is used for connecting with external
Soundwire TX Codecs like WCD938x.
This patch adds support to the codec part of the TX Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem).
This is used for connecting with SoundWire devices like WCD938x Codecs to provide
headphone/ear/lineout functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the internal codec found in the JZ4760 SoC from Ingenic.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to show the options to build Ingenic-specific drivers on all
MIPS kernel configurations if Ingenic SoCs support is not enabled.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO operations
include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my tests
only covered building it as a module, the patch wasn't just dropped as
it had already been merged elsewhere.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XdOYACgkQJNaLcl1U
h9DKWwf7BVgrH1vcgOdZ/8xbVnu2pmNGJzHydfV2XD2fHuEgkuVN1dv756HFCzBj
XpHGa+XRGt1j39KsBqhcBOGuCLiTmjmoxWXq4MnBFVHcXBNRk1z6YFtkeZBkRi0j
ZxZNlrrCCaFp8KmqyqMeIU9DbiQ/ITTH/1VBcffnprYI1J9gK4JQE0iisaMIap90
XwKx4VUwT63yVZQGJPW4t65uMUbPTRqcZQzfj3DGhjmkhNI/EvpPU44K11I+op/6
7J9enekMlbOR5t7606h9gAapW1Qt+YrvTwciT9mzGNsmO8MmyUIRQUYuZAzp5RIT
BH5aIRfTUb6lYuktSKI8STrbOUdi/A==
=194Y
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is quite a busy release for regmap with two substantial features
being added:
- Support for register maps Soundwire 1.2 multi-byte operations,
allowing atomic support for registers larger than a single byte.
- Support for relaxed I/O without barriers in MMIO regmaps, allowing
them to be used efficiently on systems where default MMIO
operations include barriers.
There was also an addition and revert of use of the new Soundwire
support for RT715 due to build issues with the driver built in, my
tests only covered building it as a module, the patch wasn't just
dropped as it had already been merged elsewhere"
* tag 'regmap-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
ASoC: rt715: Fix build
regmap: sdw: add required header files
regmap: Remove duplicate `type` field from regmap `regcache_sync` trace event
regmap: Fix order of regmap write log
regmap: mmio: add config option to allow relaxed MMIO accesses
Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_ADAU1372_I2C and SND_SOC_ADAU1372_SPI prpoerly select the REGMAP
config they need but forget to depend on the underlying bus.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201130215626.2400999-1-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the Analog Devices ADAU1372 audio CODEC.
[Alexandre Belloni: allow 32kHz for TDM4 in slave mode]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201127123030.1610574-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First version of rt715 sdw sdca codec driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201103172226.4278-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
VA macro block which is used for connecting with DMICs.
This patch adds support to the codec part of the VA Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201105113458.12360-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
WSA macro block which is used for connecting with WSA Smart
speakers over soundwire.
This patch adds support to the codec part of the WSA Macro block.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201105113458.12360-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add codec driver for Nuvoton NAU8315.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201102023212.594137-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TI PCM5102A codec driver can be used with the generic sound card
drivers, so it should be selectable. For example, with the addition
of #sound-dai-cells = <0> property in DT, it can be used with simple/graph
card drivers.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the Texas Instruments TAS2764 amplifier driver
with I/V sense for loud speaker applications.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS4234 is a highly versatile CODEC that combines 4 channels of
high performance analog to digital conversion, 4 channels of high
performance digital to analog conversion for audio, and 1 channel of
digital to analog conversion to provide a nondelayed audio reference
signal to an external Class H tracking power supply.
DAC5 is only supported as a 5th audio channel. Tracking Power Supply
mode is not currently supported by the driver.
In DSP_A mode the slots for DAC1-4 and optionally DAC5 can be set.
The codec always claims 4 slots for DAC1-4 and these must be in the
same nibble of the mask. The codec has a fixed mapping for ADC slots.
In I2S/LJ modes the codec has a fixed mapping for DAC1-4 and ADC1-4.
DAC5 is not available in these modes.
The MCLK source must be preset to a valid frequency before probe()
because it must be running all the time the codec is out of reset.
The VA_SEL bit will be set automatically to 3.3v or 5v during probe()
based on the reported voltage of the regulator supplying VA.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200928111821.26967-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_CROS_EC_CODEC is enabled and CRYPTO is disabled, it results
in the following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- SND_SOC_CROS_EC_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && CROS_EC [=y]
The reason is that SND_SOC_CROS_EC_CODEC selects CRYPTO_LIB_SHA256 without
depending on or selecting CRYPTO while CRYPTO_LIB_SHA256 is subordinate to
CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 93fa0af479 ("ASoC: cros_ec_codec: switch to library API for SHA-256")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200917141803.92889-1-fazilyildiran@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds rt1015p codec driver.
Rt1015p is a rt1015 variant.
- It doesn't support I2C.
- It only supports S24, 48kHz, 64FS.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200910042949.3795682-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SoundWire specific parts and extend common ones already split from
I2C.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare support for SoundWire, let's first split the I2C and common
parts. No new functionality, just indents and formatting to make
checkpatch happy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200708203215.231776-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the
driver, we can easily get a build failure when I2C is built-in
but soundwire is not:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y])
Selected by [y]:
- SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y])
Rework the driver to have three separate modules, with the
main driver just dealing with the common bits and the actual
initialization as part of i2c and sdw specific modules.
The conversion is fairly mechanical to keep it easy to review,
i.e. it moves code around with the minimal required renaming
and changes.
Fixes: 6b8e4e7db3 ("ASoC: amd: Add machine driver for Raven based platform")
Fixes: fd443a20c2 ("ASoC: rt5682: fix I2C/Soundwire dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
All boards with Ingenic SoCs probe with devicetree already, we have no
use for a non-devicetree path.
This solves some compilation warnings that were caused by unused
variables in the case where CONFIG_OF was disabled.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200523125455.12392-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The CrOS EC codec driver uses SHA-256 explicitly, and not in a
performance critical manner, so there is really no point in using
the SHASH crypto API here. Let's switch to the library API instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200515100309.20795-1-ardb@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If one of the two is a loadable module, the combined driver must
not be built-in:
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_free':
rt5682.c:(.text+0xb34): undefined reference to `sdw_stream_remove_slave'
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_params':
rt5682.c:(.text+0xe78): undefined reference to `sdw_stream_add_slave'
In particular, the soundwire driver must not be built-in if
CONFIG_I2C=m.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200428214642.3925004-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
