This patch replaces the do-while(0); loop which is used for breaking if
a check fails by using the `continue` statement. This saves one
indentation level.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes whitespace before semicolons and add blank line after
declaration.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplifies
if (a) {
x = false;
} else {
if (b) {
x = false;
}
}
to
if (a || b) {
x = false;
}
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the unneccessary blocks inside the case statements
and fixes the indentation of their content.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch switches all use of the U8 typedef to use the kernel's u8 type
instead.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds new a new directory parahotplug to the visorchipset sysfs
directory, and two new attributes, deviceenabled, and devicedisabled, into the
new directory, to add s-Par parahotplug support.
The parahotplug interface is used to deal with SR-IOV recovery situations on
s-Par guest partitions. The command service partition will send a message to a
guest when an SR-IOV device that guest is using needs to be temporarily removed.
The message triggers a udev event that will cause a recovery script to run.
When that script has completed its work, it will write to one of the
parahotplug interfaces to send a message back to Command, indicating that the
recovery action has completed.
When a guest that is sharing an SR-IOV device is restarted, that guest will
take down the PF driver on the device, but any guests with VFs will not know
that their device needs to be reset as well. The recovery script makes it so
the device will be shut down fully and then restarted after the sharing guest
comes back up, and ensures that the timing is correct.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the parahotplug proc code entirely in preparation for replacement with
sysfs entries. Since visorchipset_proc_read_writeonly() is orphaned by the
removal, it is removed as well.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value is either DEVICE_INIT_COLD or DEVICE_INIT_DXPL making no
difference to code.
Remove typedef and remove if statement in device_init_registers
pulling the code in.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing all variables associated with the code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing all code within and function MngWorkItem.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added three newlines after variable declarations to pass checkpatch.pl.
Signed-off by: Santiago Torres-Arias <torresariass@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes all sparse warnings "Using plain integer as NULL pointer"
in drivers/staging/lustre
drivers/staging/lustre/lnet/lnet/api-ni.c:1665:32: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lnet/lnet/api-ni.c:1773:35: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/fld/fld_request.c:171:17: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/llite/llite_lib.c:155:30: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/llite/lproc_llite.c:846:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:902:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:946:54: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_obd.c:2819:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/lov/lov_dev.c:456:66: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2426:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2569:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/mdc_request.c:2740:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:175:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:176:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:177:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:178:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:179:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:180:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:181:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:182:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:183:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:185:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:186:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:193:66: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:194:63: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:195:56: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:196:51: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:197:50: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:198:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:199:57: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:200:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:206:48: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mdc/lproc_mdc.c:207:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/mgc/mgc_request.c:199:9: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/linux/linux-module.c:331:11: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/obd_config.c:1164:53: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/obd_config.c:1306:71: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/llog_test.c:943:62: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdclass/llog_test.c:944:65: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/obdecho/echo_client.c:3116:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3424:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3548:46: warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/osc/osc_request.c:3615:46: warning: Using plain integer as NULL pointer
Signed-off-by: Radek Dostal <rd@radekdostal.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the const modifier to the file_operations struct, since it is
normally const.
Signed-off-by: Jessica Yu <jyu@cowsay.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary parens from return statements, return is not a function
Signed-off-by: Jessica Yu <jyu@cowsay.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove extraneous space after open paren and before close paren.
Signed-off-by: Jessica Yu <jyu@cowsay.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The amplc_dio200_common module currently uses a union in the private
data to determine if the hardware uses port or memory mapped I/O.
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address and remove all the union code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new 'mmio' member in the comedi_device for the __iomem * base
address.
Since this was the only member in the private data, remove the struct
and its allocation.
This legacy driver is a bit strange. The base address of the board is
passed to the (*attach) using by the user using the comedi_config
utiltiy. This base address is currently not ioremap'ed and is simply
cast to a void __iomem *. I'm not sure if this is correct. Add a
comment so it will be addressed later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Only the ni_labpc_pci module does the ioremap, its also the only
module that sets the 'has_mmio' member in the boardinfo. Remove
this member from the boardinfo and use dev->mmio to determine if
the I/O is memory mapped.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the 8255 support code in preperation for using the comedi_device
'mmio' member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_device parameter that is passed to this function to find
the dev->iobase so it does not have to be included in each call.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_device parameter that is passed to this function to find
the dev->iobase so it does not have to be included in each call.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver uses some callbacks in the private data to handle the
port mapped or memory mapped I/O used to access the hardware.
Pass the comedi_device pointer to the helper functions so that the
base address can be found and does not need to be included in each
call.
Also, remove the inline from the helper functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new 'mmio' member in the comedi_device for the ioremap'ed
'daq_io_addr'.
Move the iounmap of this address from mite_detach() to the drivers
that use the mite module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, pass the comedi_device to mite_setup() and mite_setup2()
so that the dev->class_dev can be used in the dev_{level} message to make
the messages have consistancy with the other comedi drivers.
Remove the extra dev_warn() noise in the drivers when mite_setup() fails.
Rename the 'use_iodwbsr_1' parameter and change it to a bool.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This exported function simply calls mite_setup2() with the 'use_iodsbsr_1'
parameter set to 0.
Inline the simple function and remove the EXPORT_SYMBOL_GPL.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new 'mmio' member in the comedi_device for the ioremap'ed
base address of PCI bar 2.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
