While we list the "IRQ status *and acknowledge*" registers as volatile
in the MFD description, they are missing from the writable range array,
so acknowledging any interrupts was met with an -EIO error.
This error propagates up, leading to the whole AXP717 driver failing to
probe, which is fatal to most systems using this PMIC, since most
peripherals refer one of the PMIC voltage rails.
This wasn't noticed on the initial submission, since the interrupt was
completely missing at this point, but the DTs now merged describe the
interrupt, creating the problem.
Add the five registers that hold those bits to the writable array.
This fixes the boot on the Anbernic systems using the AXP717 PMIC.
Fixes: b5bfc8ab24 ("mfd: axp20x: Add support for AXP717 PMIC")
Reported-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
As the comment in this function says, the code currently just clears the
CIPSO part with IPOPT_NOP, rather than removing it completely and
trimming the packet. The other cipso_v4_*_delattr() functions, however,
do the proper removal and also calipso_skbuff_delattr() makes an effort
to remove the CALIPSO options instead of replacing them with padding.
Some routers treat IPv4 packets with anything (even NOPs) in the option
header as a special case and take them through a slower processing path.
Consequently, hardening guides such as STIG recommend to configure such
routers to drop packets with non-empty IP option headers [1][2]. Thus,
users might expect NetLabel to produce packets with minimal padding (or
at least with no padding when no actual options are present).
Implement the proper option removal to address this and to be closer to
what the peer functions do.
[1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937
[2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
req->n_channels must be set before req->channels[] can be used.
This patch fixes one of the issues encountered in [1].
[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[ 83.964264] Call Trace:
[ 83.964267] <TASK>
[ 83.964269] dump_stack_lvl+0x3f/0xc0
[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110
[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0
[ 83.964281] __ieee80211_start_scan+0x601/0x990
[ 83.964291] nl80211_trigger_scan+0x874/0x980
[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160
[ 83.964298] genl_rcv_msg+0x240/0x270
[...]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810
Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.
The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/
Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/
Fixes: 9908a32e94 ("USB: remove err() macro from usb class drivers")
Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.
It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.
Fixes: 521223d7c2 ("io_uring/cancel: don't default to setting req->work.cancel_seq")
Cc: stable@vger.kernel.org
Reported-by: Li Shi <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZmrWQwAKCRC4FpNVCsYG
v5BIAP9gS5S9mRVp9h+vgo5U84h2VUDT3IoKBEFslkmhKuFATwEAsfbr2m3fD5RT
idAbg0enxy5V/etTB7oK/1TaSKFAqwo=
=ApmP
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-06-13' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
-----BEGIN PGP SIGNATURE-----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=ydsM
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Regression fix
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com
This function wants to move a subset of a list from one element to the
tail into another list. It also needs to use the srcu synchronize
instead of the regular rcu version. Do this one element at a time
because that's the only to do it.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If inc_block_group_ro systematically fails (e.g. due to ETXTBUSY from
swap) or btrfs_relocate_chunk systematically fails (from lack of
space), then this worker becomes an infinite loop.
At the very least, this strands the cleaner thread, but can also result
in hung tasks/RCU stalls on PREEMPT_NONE kernels and if the
reclaim_bgs_lock mutex is not contended.
I believe the best long term fix is to manage reclaim via work queue,
where we queue up a relocation on the triggering condition and re-queue
on failure. In the meantime, this is an easy fix to apply to avoid the
immediate pain.
Fixes: 7e27180994 ("btrfs: reinsert BGs failed to reclaim")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um)
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Fixes: 1ae6921009 ("bpf: inline bpf_get_smp_processor_id() helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240613173146.2524647-1-maze@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fake_reg moved into env->fake_reg given it consumes a lot of stack
space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off()
as well now that we have it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240613115310.25383-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:
[...]
13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar()
14: (b7) r0 = 0 ; R0_w=0
15: (b4) w0 = -1 ; R0_w=0xffffffff
16: (74) w0 >>= 1 ; R0_w=0x7fffffff
17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
19: (56) if w6 != 0x7ffffffd goto pc+1
REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
19: R6_w=0x7fffffff
20: (95) exit
from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
23: (95) exit
from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: (14) w6 -= 14 ; R6_w=0
[...]
What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).
Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).
When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():
[...]
t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
reg1->var_off = tnum_with_subreg(reg1->var_off, t);
reg2->var_off = tnum_with_subreg(reg2->var_off, t);
[...]
Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.
Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.
[0] https://github.com/google/buzzer
Fixes: 67420501e8 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev",
it traded lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the skb,
confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive recursion
detection (recursing on CPU 0), which bubbles up to user space as
a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc
in the list:set type
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cyRR
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Slim pickings this time, probably a combination of summer, DevConf.cz,
and the end of first half of the year at corporations.
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev", it traded
lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the
skb, confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive
recursion detection (recursing on CPU 0), which bubbles up to user
space as a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc in the
list:set type"
* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
gve: Clear napi->skb before dev_kfree_skb_any()
ionic: fix use after netif_napi_del()
Revert "igc: fix a log entry using uninitialized netdev"
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
gve: ignore nonrelevant GSO type bits when processing TSO headers
net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
mailmap: map Geliang's new email address
mptcp: pm: update add_addr counters after connect
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
mptcp: ensure snd_una is properly initialized on connect
...
Bugfixes:
- NFSv4.2: Fix a memory leak in nfs4_set_security_label
- NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
- NFS: Add appropriate memory barriers to the sillyrename code
- Propagate readlink errors in nfs_symlink_filler
- NFS: don't invalidate dentries on transient errors
- NFS: fix unnecessary synchronous writes in random write workloads
- NFSv4.1: enforce rootpath check when deciding whether or not to trunk
Other:
- Change email address for Trond Myklebust due to email server concerns
-----BEGIN PGP SIGNATURE-----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=DeAG
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Bugfixes:
- NFSv4.2: Fix a memory leak in nfs4_set_security_label
- NFSv2/v3: abort nfs_atomic_open_v23 if the name is too long.
- NFS: Add appropriate memory barriers to the sillyrename code
- Propagate readlink errors in nfs_symlink_filler
- NFS: don't invalidate dentries on transient errors
- NFS: fix unnecessary synchronous writes in random write workloads
- NFSv4.1: enforce rootpath check when deciding whether or not to trunk
Other:
- Change email address for Trond Myklebust due to email server concerns"
* tag 'nfs-for-6.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: add barriers when testing for NFS_FSDATA_BLOCKED
SUNRPC: return proper error from gss_wrap_req_priv
NFSv4.1 enforce rootpath check in fs_location query
NFS: abort nfs_atomic_open_v23 if name is too long.
nfs: don't invalidate dentries on transient errors
nfs: Avoid flushing many pages with NFS_FILE_SYNC
nfs: propagate readlink errors in nfs_symlink_filler
MAINTAINERS: Change email address for Trond Myklebust
NFSv4: Fix memory leak in nfs4_set_security_label
To check for unset node ID for a range memblock_validate_numa_coverage()
was checking for NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID
was specified by buggy firmware.
Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
memblock_set_node() and use NUMA_NO_NODE in x86::numa_init().
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmZq/CsQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kcpQB/4kmPgJJ0ApdwLT1JiPgLabAPOa05GvCcfa
/1JsoAIX5NlBThy2mX0QJ3963MFkB1wc8KqJuG8OpsL9/AHpdgts+4Me/K2PORWH
cZbgU01S4eqlBIY08mODnSYIpQI+n88kzYob+jRGud/NSwk7wu/+//n6lACqsltE
K+E/9zSfmnnr8gxv6rsi7YTQrXWAsGIhLJDLamYM9Q3Pz0azvdzrfLRlVV4NaaUw
Dvj6wG60A9qAmXP46OTU3DvlVGA5qv4rahLA8JuHC3TIV12/JchENL2yOAj5SMiv
0k/q+89HAcvFm9ByV+auEd1IKjgvNPQYsWaYnB88HZ10oMNkuDD0
=Y/Dv
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix validation of NUMA coverage.
memblock_validate_numa_coverage() was checking for a unset node ID
using NUMA_NO_NODE, but x86 used MAX_NUMNODES when no node ID was
specified by buggy firmware.
Update memblock to substitute MAX_NUMNODES with NUMA_NO_NODE in
memblock_set_node() and use NUMA_NO_NODE in x86::numa_init()"
* tag 'fixes-2024-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/mm/numa: Use NUMA_NO_NODE when calling memblock_set_node()
memblock: make memblock_set_node() also warn about use of MAX_NUMNODES
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due
to FW issue. Fix this by retrying five times before moving to
Safe Mode. Sleep for 20 ms before retrying. This was tested with the
4.40 firmware.
Fixes: c764881096 ("ice: Implement Dynamic Device Personalization (DDP) download")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 24407a01e5 ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include 200G link speed message
support. As a result the driver incorrectly reports Unknown for 200G
link speed.
Fix this by adding 200G support to ice_print_link_msg().
Fixes: 24407a01e5 ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes
that irdma would break and report hardware initialization failed after
suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5).
The problem is caused due to the collision between the irq numbers
requested in irdma and the irq numbers requested in other drivers
after suspend/resume.
The irq numbers used by irdma are derived from ice's ice_pf->msix_entries
which stores mappings between MSI-X index and Linux interrupt number.
It's supposed to be cleaned up when suspend and rebuilt in resume but
it's not, causing irdma using the old irq numbers stored in the old
ice_pf->msix_entries to request_irq() when resume. And eventually
collide with other drivers.
This patch fixes this problem. On suspend, we call ice_deinit_rdma() to
clean up the ice_pf->msix_entries (and free the MSI-X vectors used by
irdma if we've dynamically allocated them). On resume, we call
ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the
MSI-X vectors if we would like to dynamically allocate them).
Fixes: f9f5301e7e ("ice: Register auxiliary device to provide RDMA")
Tested-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8fa4219dba ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded. When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state. This regression may cause the VF to fail to
initialize.
Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure. Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.
Fixes: 84a911db83 ("bnxt_en: Update firmware interface to 1.10.2.118")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some editors (like the vim variants), when seeing "trim_whitespace"
decide to do just that for all of the whitespace in the file you are
saving, even if it is not on a line that you have modified. This plays
havoc with diffs and is NOT something that should be intended.
As the "only trim whitespace on modified lines" is not part of the
editorconfig standard yet, just delete these lines from the
.editorconfig file so that we don't end up with diffs that are
automatically rejected by maintainers for containing things they
shouldn't.
Cc: Danny Lin <danny@kdrag0n.dev>
Cc: Íñigo Huguet <ihuguet@redhat.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: 5a602de997 ("Add .editorconfig file for basic formatting")
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/2024061137-jawless-dipped-e789@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it
is freed with dev_kfree_skb_any(). This can result in a subsequent call
to napi_get_frags returning a dangling pointer.
Fix this by clearing napi->skb before the skb is freed.
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Cc: stable@vger.kernel.org
Reported-by: Shailend Chand <shailend@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsp_driver=4 will force the AVS driver stack to be used, it is better to
docuement this.
Fixes: 1affc44ea5 ("ASoC: Intel: avs: PCI driver implementation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240607060021.11503-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-5-sbinding@opensource.cirrus.com
Add support for this laptop, which uses CS35L41 HDA amps.
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
[ fixed to lower hex numbers in quirk entries -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240606130351.333495-4-sbinding@opensource.cirrus.com
The Framework Laptop 16 does not have a combination headphone/headset
3.5mm jack; however, applying the pincfg from the Laptop 13 (nid=0x19)
erroneously informs hda that the node is present.
Fixes: 8804fa04a4 ("ALSA: hda/realtek: Add Framework laptop 16 to quirks")
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240605-alsa-hda-realtek-remove-framework-laptop-16-from-quirks-v1-1-11d47fe8ec4d@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the N14AP7 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605153923.2837-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP ProBook 445/465 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240605092243.41963-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
disable c6 called in guc_pc_fini_hw is unreachable.
GuC PC init returns earlier if skip_guc_pc is true and never
registers the finish call thus making disable_c6 unreachable.
move this call to gt idle.
v2: rebase
v3: add fixes tag (Himal)
Fixes: 975e4a3795 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6800e63cf9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tests show that user fence signalling requires kind of write barrier,
otherwise not all writes performed by the workload will be available
to userspace. It is already done for render and compute, we need it
also for the rest: video, gsc, copy.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-2-06e7932f784a@intel.com
(cherry picked from commit 3ad7d18c5d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.
Fixes: 0698ff57bf ("drm/xe/pf: Update the LMTT when freeing VF GT config")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607153155.1592-1-michal.wajdeczko@intel.com
(cherry picked from commit b321cb83a3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
After starting to install the EC address space handler at the ACPI
namespace root, if there is an "orphan" _REG method in the EC device's
scope, it will not be evaluated any more. This breaks EC operation
regions on some systems, like Asus gu605.
To address this, use a wrapper around an existing ACPICA function to
look for an "orphan" _REG method in the EC device scope and evaluate
it if present.
Fixes: 60fa6ae6e6 ("ACPI: EC: Install address space handler at the namespace root")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945
Reported-by: VitaliiT <vitaly.torshyn@gmail.com>
Tested-by: VitaliiT <vitaly.torshyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a re-commit of
da05b143a3 ("x86/boot: Don't add the EFI stub to targets")
after the tagged patch incorrectly reverted it.
vmlinux-objs-y is added to targets, with an assumption that they are all
relative to $(obj); adding a $(objtree)/drivers/... path causes the
build to incorrectly create a useless
arch/x86/boot/compressed/drivers/... directory tree.
Fix this just by using a different make variable for the EFI stub.
Fixes: cb8bda8ad4 ("x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v6.1+
Link: https://lore.kernel.org/r/xm267ceukksz.fsf@bsegall.svl.corp.google.com
This reverts commit 277a036312.
While fixing old boards with broken DTs, this change will break
newer ones with correct gpio polarity annotation.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
