mirror of
https://github.com/torvalds/linux
synced 2024-10-01 08:50:11 +00:00
581 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
de10553fce |
x86 APIC updates:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the lower
bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as that
must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems years
ago, but that missed - or did not envision - the zero IO/APIC case.
Consolidate the zero check and return the provided "from" argument to the
core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU in a
cluster must allocate a new cluster CPU mask. As this happens during the
early startup of a CPU, where memory allocations cannot be done, the
mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and if
the to be brought up CPU is the first in a cluster the CPU takes over
this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which is
used today, but would fail completely for parallel bringup of CPUs.
The cluster association of a CPU can be computed from the APIC ID which
is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront and
the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux CPU
number. The CPU number allows it to retrieve the rest of the required
data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs provide
a new variable smpboot_control which contains the Linux CPU number for
now. The starting CPU can retrieve and compute all required information
for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via the
APIC ID, when smpboot_control has the corresponding control bit set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor because
confidental computing platforms need special treatment in the early
startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to late
discoveries of fundamental issue with those patches these commits never
happened.
The merge commit is unfortunately in the middle of the APIC commits so
unraveling it would have required a rebase or revert. As the parallel
bringup seems to be well on its way for 6.5 this would be just pointless
churn. As the commit does not contain any functional change it's not a
risk to keep it.
-----BEGIN PGP SIGNATURE-----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=IQWG
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the
lower bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as
that must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer
interrupt on x86. The return value is unchecked in the core code, so
it ends up to allocate interrupt number 0 which is subsequently
considered to be invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems
years ago, but that missed - or did not envision - the zero IO/APIC
case.
Consolidate the zero check and return the provided "from" argument to
the core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU
in a cluster must allocate a new cluster CPU mask. As this happens
during the early startup of a CPU, where memory allocations cannot be
done, the mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and
if the to be brought up CPU is the first in a cluster the CPU takes
over this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which
is used today, but would fail completely for parallel bringup of
CPUs.
The cluster association of a CPU can be computed from the APIC ID
which is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront
and the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux
CPU number. The CPU number allows it to retrieve the rest of the
required data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs
provide a new variable smpboot_control which contains the Linux CPU
number for now. The starting CPU can retrieve and compute all
required information for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via
the APIC ID, when smpboot_control has the corresponding control bit
set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor
because confidental computing platforms need special treatment in the
early startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to
late discoveries of fundamental issue with those patches these
commits never happened.
The merge commit is unfortunately in the middle of the APIC commits
so unraveling it would have required a rebase or revert. As the
parallel bringup seems to be well on its way for 6.5 this would be
just pointless churn. As the commit does not contain any functional
change it's not a risk to keep it.
* tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
x86/coco: Export cc_vendor
x86/smpboot: Reference count on smpboot_setup_warm_reset_vector()
x86/smpboot: Remove initial_gs
x86/smpboot: Remove early_gdt_descr on 64-bit
x86/smpboot: Remove initial_stack on 64-bit
x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel
|
||
|
Linus Torvalds
|
1699dbebf3 |
- Improve code generation in ACPI's global lock's acquisition function
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGhkcACgkQEsHwGGHe VUq2yQ//W1tCGznJ+xSDBwOPillqwPB9asMrIjN9jSMet6mNZlApu4N44BTMHnD7 Jex+MOfabSbVEgwJ+zUOla065/fWhO2kdPNLdOS9Pui3kftEnMkKwZMbx0v6erk0 3rckg8UVkfMSrskvWkyy1RftJY9D5xiCTVzRmRpIR8GWn6eCFrGdLLINbLzSX5K/ 96cXF5iiTkWzj+nKAJhqsQZaXA+k2ro/bae7onX1gzJ08lR5x+XDDKv1HzJhnPJW Kw9lte4con7FRAEk4X8Q2UPTBvQjtFlfG7F1ho1jayWVwUO7z020tomnL0BO7Umd Whh6j66ZTD3cV+0oG5xu/JIBgHLlLP3q/+gZyePSDIXmoZm8MKmWldQ84Xbv0h8F dRxQUxxDAoRypK6ZN6aZgA/twxeIu6ezYr3paQiX9sjtQzFEa9DKTsOnzgrO0fsi t9nu4nzE4jBQ41DP6+GVlZ+ATujTixmirHNUj72H/sPVnqmniRLKMPGnsMPo9yi+ +J+Yu382nuKl8O5koWC7zfUEZCQWZCPfvX7JCLir6YZl6qV36mPZGJknMX+ogquc CwDor5US71sExmEOSkQTog5YN7ldXKruWRsvuIl2yMH3xHWwCWw0VS0pHCAn3Fqe r/MdKXYjjDr1QOZWB9EyqrAUNbS2ftjI9/zrzq8wNsbT67gEHug= =ObsH -----END PGP SIGNATURE----- Merge tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 ACPI update from Borislav Petkov: - Improve code generation in ACPI's global lock's acquisition function * tag 'x86_acpi_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ACPI/boot: Improve __acpi_acquire_global_lock |
||
|
Eric DeVolder
|
fed8d8773b |
x86/acpi/boot: Correct acpi_is_processor_usable() check
The logic in acpi_is_processor_usable() requires the online capable
bit be set for hotpluggable CPUs. The online capable bit has been
introduced in ACPI 6.3.
However, for ACPI revisions < 6.3 which do not support that bit, CPUs
should be reported as usable, not the other way around.
Reverse the check.
[ bp: Rewrite commit message. ]
Fixes:
|
||
|
Mario Limonciello
|
a74fabfbd1 |
x86/ACPI/boot: Use FADT version to check support for online capable
ACPI 6.3 introduced the online capable bit, and also introduced MADT
version 5.
Latter was used to distinguish whether the offset storing online capable
could be used. However ACPI 6.2b has MADT version "45" which is for
an errata version of the ACPI 6.2 spec. This means that the Linux code
for detecting availability of MADT will mistakenly flag ACPI 6.2b as
supporting online capable which is inaccurate as it's an ACPI 6.3 feature.
Instead use the FADT major and minor revision fields to distinguish this.
[ bp: Massage. ]
Fixes:
|
||
|
Uros Bizjak
|
22767544e9 |
x86/ACPI/boot: Improve __acpi_acquire_global_lock
Improve __acpi_acquire_global_lock by using a temporary variable. This enables compiler to perform if-conversion and improves generated code from: ... 72a: d1 ea shr %edx 72c: 83 e1 fc and $0xfffffffc,%ecx 72f: 83 e2 01 and $0x1,%edx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 83 e2 03 and $0x3,%edx 740: 31 c0 xor %eax,%eax 742: 83 fa 03 cmp $0x3,%edx 745: 0f 95 c0 setne %al 748: f7 d8 neg %eax to: ... 72a: d1 e9 shr %ecx 72c: 83 e2 fc and $0xfffffffc,%edx 72f: 83 e1 01 and $0x1,%ecx 732: 09 ca or %ecx,%edx 734: 83 c2 02 add $0x2,%edx 737: f0 0f b1 17 lock cmpxchg %edx,(%rdi) 73b: 75 e9 jne 726 <__acpi_acquire_global_lock+0x6> 73d: 8d 41 ff lea -0x1(%rcx),%eax BTW: the compiler could generate: lea 0x2(%rcx,%rdx,1),%edx instead of: or %ecx,%edx add $0x2,%edx but unwated conversion from add to or when bits are known to be zero prevents this improvement. This is GCC PR108477. No functional change intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230320212012.12704-1-ubizjak%40gmail.com |
||
|
Brian Gerst
|
8f6be6d870 |
x86/smpboot: Remove initial_gs
Given its CPU#, each CPU can find its own per-cpu offset, and directly set GSBASE accordingly. The global variable can be eliminated. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Usama Arif <usama.arif@bytedance.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230316222109.1940300-9-usama.arif@bytedance.com |
||
|
Brian Gerst
|
c253b64020 |
x86/smpboot: Remove early_gdt_descr on 64-bit
Build the GDT descriptor on the stack instead. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Usama Arif <usama.arif@bytedance.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230316222109.1940300-8-usama.arif@bytedance.com |
||
|
Brian Gerst
|
3adee777ad |
x86/smpboot: Remove initial_stack on 64-bit
In order to facilitate parallel startup, start to eliminate some of the global variables passing information to CPUs in the startup path. However, start by introducing one more: smpboot_control. For now this merely holds the CPU# of the CPU which is coming up. Each CPU can then find its own per-cpu data, and everything else it needs can be found from there, allowing the other global variables to be removed. First to be removed is initial_stack. Each CPU can load %rsp from its current_task->thread.sp instead. That is already set up with the correct idle thread for APs. Set up the .sp field in INIT_THREAD on x86 so that the BSP also finds a suitable stack pointer in the static per-cpu data when coming up on first boot. On resume from S3, the CPU needs a temporary stack because its idle task is already active. Instead of setting initial_stack, the sleep code can simply set its own current->thread.sp to point to the temporary stack. Nobody else cares about ->thread.sp for a thread which is currently on a CPU, because the true value is actually in the %rsp register. Which is restored with the rest of the CPU context in do_suspend_lowlevel(). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Usama Arif <usama.arif@bytedance.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230316222109.1940300-7-usama.arif@bytedance.com |
||
|
Linus Torvalds
|
35011c67c8 |
Changes in this cycle:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as
a result.
- Do not register processors that cannot be onlined for x2APIC
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=p3z1
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as a result.
- Do not register processors that cannot be onlined for x2APIC
* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
scripts/head-object-list: Remove x86 from the list
x86/boot: Robustify calling startup_{32,64}() from the decompressor code
|
||
|
Uros Bizjak
|
890a0794b3 |
x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
__acpi_{acquire,release}_global_lock(). x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after CMPXCHG
(and related MOV instruction in front of CMPXCHG).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG
fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE() to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230116162522.4072-1-ubizjak@gmail.com
|
||
|
Kishon Vijay Abraham I
|
e2869bd7af |
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
Section 5.2.12.12 Processor Local x2APIC Structure in the ACPI v6.5
spec mandates that both "enabled" and "online capable" Local APIC Flags
should be used to determine if the processor is usable or not.
However, Linux doesn't use the "online capable" flag for x2APIC to
determine if the processor is usable. As a result, cpu_possible_mask has
incorrect value and results in more memory getting allocated for per_cpu
variables than it is going to be used.
Make sure Linux parses both "enabled" and "online capable" flags for
x2APIC to correctly determine if the processor is usable.
Fixes:
|
||
|
Tony W Wang-oc
|
dacca1e5e7 |
x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs
On all recent Centaur platforms, ARB_DISABLE is handled by PMU automatically while entering C3 type state. No need for OS to issue the ARB_DISABLE, so set bm_control to zero to indicate that. Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/1667792089-4904-1-git-send-email-TonyWWang-oc%40zhaoxin.com |
||
|
Mario Limonciello
|
fbd74d1689 |
ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
When commit |
||
|
Mario Limonciello
|
8b356e536e |
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
commit |
||
|
Linus Torvalds
|
09583dfed2 |
Power management updates for 5.19-rc1
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
||
|
Linus Torvalds
|
1961b06c91 |
ACPI updates for 5.19-rc1
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
* Add support for the Windows 11 _OSI string (Mario Limonciello)
* Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
* iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
* iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
* iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
* Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
* Clean up double word in comment (Tom Rix).
* Update copyright notices to the year 2022 (Bob Moore).
* Remove some tabs and // comments - automated cleanup (Bob Moore).
* Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
* Interpreter: Add units to time variable names (Paul Menzel).
* Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
* Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
* iASL/MADT: Add OEM-defined subtable (Bob Moore).
* Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
* Updates for revision E.d of IORT (Shameer Kolothum).
* Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner).
-----BEGIN PGP SIGNATURE-----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=XH6/
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
|
||
|
Linus Torvalds
|
a13dc4d409 |
- Serious sanitization and cleanup of the whole APERF/MPERF and
frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKLn48ACgkQEsHwGGHe VUpbkg/+PELrc0y/qxLM/+dyftKYY16Rhk6ZVAXfwqlh5ldyVQcLMUgKwDqYyTn2 XmgdI3cTcFlH2K7j6ANWLu0I9NPaviimUcEdMVcXt7aY5mGWk/q4hIyCYM8d41sV qKx4OjNSdyoofG6MtwFLJDuoeVg99Bqgvm4nP9BuxL0dZJ2hfcUZ7MTxYCx9ZYjK /3trx0NV287Yg/wm91EU0nLQzy9xbGS7WCmMnse6uxiUdm2vXbBt8oNFF4f747Dj 0cArfNrMgYq4Cv5bgt/Ki0NU/n4EOGDpJUSyQwlnjDKeN81ESPy7IWtTQ6cE/rJK BZeUIPiGiYHwtqXv0UTAPGLG8cAqKeab8u0xAOyrFVDkTc0+WlPJRsUAOmRRGIGE M8ZjoxrLeuFgxw6vKpVjaA+mDRj3qEpSH+IrTcekS98PN7gmVzvq03GobgGbT7YB xmtbThJa+514FfUVckkyC0+A56BknUIgVxwFPqrthE2atzYTbH67hW4U0yVWXXr7 2VI7ttozBrYVgHCWhD9eoT0uhyD74Vl6pqHnqzY9ShIfKVUGvMgKHHg04nLLtF7W hm87xV3Q5UEmXhTmDzT1rUZ99mBUxGbWxk227I9raMugIh7pp9wIr57+7O0LRYfX TdnE2+tL8RMi7+XzRH5iLhnwkrvahBESeHSQ7GVI1Y2zMmmFN+0= =Dks/ -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: - Serious sanitization and cleanup of the whole APERF/MPERF and frequency invariance code along with removing the need for unnecessary IPIs - Finally remove a.out support - The usual trivial cleanups and fixes all over x86 * tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86: Remove empty files x86/speculation: Add missing srbds=off to the mitigations= help text x86/prctl: Remove pointless task argument x86/aperfperf: Make it correct on 32bit and UP kernels x86/aperfmperf: Integrate the fallback code from show_cpuinfo() x86/aperfmperf: Replace arch_freq_get_on_cpu() x86/aperfmperf: Replace aperfmperf_get_khz() x86/aperfmperf: Store aperf/mperf data for cpu frequency reads x86/aperfmperf: Make parts of the frequency invariance code unconditional x86/aperfmperf: Restructure arch_scale_freq_tick() x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct x86/aperfmperf: Untangle Intel and AMD frequency invariance init x86/aperfmperf: Separate AP/BP frequency invariance init x86/smp: Move APERF/MPERF code where it belongs x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu() x86/process: Fix kernel-doc warning due to a changed function name x86: Remove a.out support x86/mm: Replace nodes_weight() with nodes_empty() where appropriate x86: Replace cpumask_weight() with cpumask_empty() where appropriate x86/pkeys: Remove __arch_set_user_pkey_access() declaration ... |
||
|
Li kunyu
|
24773e6c7a |
x86: ACPI: Make mp_config_acpi_gsi() a void function
Because the return value of mp_config_acpi_gsi() is not use, change it into a void function. Signed-off-by: Li kunyu <kunyu@nfschina.com> [ rjw: Subject and changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Thomas Gleixner
|
0dfaf3f6ec |
x86/aperfmperf: Untangle Intel and AMD frequency invariance init
AMD boot CPU initialization happens late via ACPI/CPPC which prevents the Intel parts from being marked __init. Split out the common code and provide a dedicated interface for the AMD initialization and mark the Intel specific code and data __init. The remaining text size is almost cut in half: text: 2614 -> 1350 init.text: 0 -> 786 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.592465719@linutronix.de |
||
|
Thomas Gleixner
|
138a7f9c6b |
x86/aperfmperf: Separate AP/BP frequency invariance init
This code is convoluted and because it can be invoked post init via the ACPI/CPPC code, all of the initialization functionality is built in instead of being part of init text and init data. As a first step create separate calls for the boot and the application processors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de |
||
|
Amadeusz Sławiński
|
84958f38d8 |
x86/ACPI: Preserve ACPI-table override during hibernation
When overriding NHLT ACPI-table tests show that on some platforms there is problem that NHLT contains garbage after hibernation/resume cycle. Problem stems from the fact that ACPI override performs early memory allocation using memblock_phys_alloc_range() in memblock_phys_alloc_range(). This memory block is later being marked as ACPI memory block in arch_reserve_mem_area(). Later when memory areas are considered for hibernation it is being marked as nosave in e820__register_nosave_regions(). Fix this by marking ACPI override memory area as ACPI NVS (Non-Volatile-Sleeping), which according to specification needs to be saved on entering S4 and restored when leaving and is implemented as such in kernel. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Kuppuswamy Sathyanarayanan
|
f39642d0db |
x86/acpi/x86/boot: Add multiprocessor wake-up support
Secondary CPU startup is currently performed with something called the "INIT/SIPI protocol". This protocol requires assistance from VMMs to boot guests. As should be a familiar story by now, that support can not be provded to TDX guests because TDX VMMs are not trusted by guests. To remedy this situation a new[1] "Multiprocessor Wakeup Structure" has been added to to an existing ACPI table (MADT). This structure provides the physical address of a "mailbox". A write to the mailbox then steers the secondary CPU to the boot code. Add ACPI MADT wake structure parsing support and wake support. Use this support to wake CPUs whenever it is present instead of INIT/SIPI. While this structure can theoretically be used on 32-bit kernels, there are no 32-bit TDX guest kernels. It has not been tested and can not practically *be* tested on 32-bit. Make it 64-bit only. 1. Details about the new structure can be found in ACPI v6.4, in the "Multiprocessor Wakeup Structure" section. Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220405232939.73860-22-kirill.shutemov@linux.intel.com |
||
|
Linus Torvalds
|
02b82b02c3 |
Power management updates for 5.18-rc1
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
|
||
|
David Woodhouse
|
f6c46b1d62 |
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
The ACPI specification says that OSPM should refuse to restore from hibernate if the hardware signature changes, and should boot from scratch. However, real BIOSes often vary the hardware signature in cases where we *do* want to resume from hibernate, so Linux doesn't follow the spec by default. However, in a virtual environment there's no reason for the VMM to vary the hardware signature *unless* it wants to trigger a clean reboot as defined by the ACPI spec. So enable the check by default if a hypervisor is detected. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mark Cilissen
|
e702196bf8 |
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
On this board the ACPI RSDP structure points to both a RSDT and an XSDT, but the XSDT points to a truncated FADT. This causes all sorts of trouble and usually a complete failure to boot after the following error occurs: ACPI Error: Unsupported address space: 0x20 (*/hwregs-*) ACPI Error: AE_SUPPORT, Unable to initialize fixed events (*/evevent-*) ACPI: Unable to start ACPI Interpreter This leaves the ACPI implementation in such a broken state that subsequent kernel subsystem initialisations go wrong, resulting in among others mismapped PCI memory, SATA and USB enumeration failures, and freezes. As this is an older embedded platform that will likely never see any BIOS updates to address this issue and its default shipping OS only complies to ACPI 1.0, work around this by forcing `acpi=rsdt`. This patch, applied on top of Linux 5.10.102, was confirmed on real hardware to fix the issue. Signed-off-by: Mark Cilissen <mark@yotsuba.nl> Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Huang Rui
|
eb5616d4ad |
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
The init_freq_invariance_cppc code actually doesn't need the SMP functionality. So setting the CONFIG_SMP as the check condition for init_freq_invariance_cppc may cause the confusion to misunderstand the CPPC. And the x86 CPPC file is better space to store the CPPC related functions, while the init_freq_invariance_cppc is out of smpboot, that means, the CONFIG_SMP won't be mandatory condition any more. And It's more clear than before. Signed-off-by: Huang Rui <ray.huang@amd.com> [ rjw: Subject adjustment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Huang Rui
|
82d8936914 |
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
The AMD maximum frequency ratio setting function depends on CPPC, so the x86 CPPC implementation file is better space for this function. Signed-off-by: Huang Rui <ray.huang@amd.com> [ rjw: Subject adjustment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Huang Rui
|
fd8af343a2 |
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
Rename the cppc_msr.c to cppc.c in x86 ACPI, that expects to use this file to cover more function implementation for ACPI CPPC beside MSR helpers. Naming as "cppc" is more straightforward as one of the functionalities under ACPI subsystem. Signed-off-by: Huang Rui <ray.huang@amd.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
64ad946152 |
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and LIVEPATCH as the backtrace misses the function which is being fixed up. - Add Straight Light Speculation mitigation support which uses a new compiler switch -mharden-sls= which sticks an INT3 after a RET or an indirect branch in order to block speculation after them. Reportedly, CPUs do speculate behind such insns. - The usual set of cleanups and improvements -----BEGIN PGP SIGNATURE----- iQIyBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHfKA0ACgkQEsHwGGHe VUqLJg/2I2X2xXr5filJVaK+sQgmvDzk67DKnbxRBW2xcPF+B5sSW5yhe3G5UPW7 SJVdhQ3gHcTiliGGlBf/VE7KXbqxFN0vO4/VFHZm78r43g7OrXTxz6WXXQRJ1n67 U3YwRH3b6cqXZNFMs+X4bJt6qsGJM1kdTTZ2as4aERnaFr5AOAfQvfKbyhxLe/XA 3SakfYISVKCBQ2RkTfpMpwmqlsatGFhTC5IrvuDQ83dDsM7O+Dx1J6Gu3fwjKmie iVzPOjCh+xTpZQp/SIZmt7MzoduZvpSym4YVyHvEnMiexQT4AmyaRthWqrhnEXY/ qOvj8/XIqxmix8EaooGqRIK0Y2ZegxkPckNFzaeC3lsWohwMIGIhNXwHNEeuhNyH yvNGAW9Cq6NeDRgz5MRUXcimYw4P4oQKYLObS1WqFZhNMqm4sNtoEAYpai/lPYfs zUDckgXF2AoPOsSqy3hFAVaGovAgzfDaJVzkt0Lk4kzzjX2WQiNLhmiior460w+K 0l2Iej58IajSp3MkWmFH368Jo8YfUVmkjbbpsmjsBppA08e1xamJB7RmswI/Ezj6 s5re6UioCD+UYdjWx41kgbvYdvIkkZ2RLrktoZd/hqHrOLWEIiwEbyFO2nRFJIAh YjvPkB1p7iNuAeYcP1x9Ft9GNYVIsUlJ+hK86wtFCqy+abV+zQ== =R52z -----END PGP SIGNATURE----- Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Get rid of all the .fixup sections because this generates misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and LIVEPATCH as the backtrace misses the function which is being fixed up. - Add Straight Line Speculation mitigation support which uses a new compiler switch -mharden-sls= which sticks an INT3 after a RET or an indirect branch in order to block speculation after them. Reportedly, CPUs do speculate behind such insns. - The usual set of cleanups and improvements * tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/entry_32: Fix segment exceptions objtool: Remove .fixup handling x86: Remove .fixup section x86/word-at-a-time: Remove .fixup usage x86/usercopy: Remove .fixup usage x86/usercopy_32: Simplify __copy_user_intel_nocache() x86/sgx: Remove .fixup usage x86/checksum_32: Remove .fixup usage x86/vmx: Remove .fixup usage x86/kvm: Remove .fixup usage x86/segment: Remove .fixup usage x86/fpu: Remove .fixup usage x86/xen: Remove .fixup usage x86/uaccess: Remove .fixup usage x86/futex: Remove .fixup usage x86/msr: Remove .fixup usage x86/extable: Extend extable functionality x86/entry_32: Remove .fixup usage x86/entry_64: Remove .fixup usage x86/copy_mc_64: Remove .fixup usage ... |
||
|
David Woodhouse
|
74d9555580 |
PM: hibernate: Allow ACPI hardware signature to be honoured
Theoretically, when the hardware signature in FACS changes, the OS is supposed to gracefully decline to attempt to resume from S4: "If the signature has changed, OSPM will not restore the system context and can boot from scratch" In practice, Windows doesn't do this and many laptop vendors do allow the signature to change especially when docking/undocking, so it would be a bad idea to simply comply with the specification by default in the general case. However, there are use cases where we do want the compliant behaviour and we know it's safe. Specifically, when resuming virtual machines where we know the hypervisor has changed sufficiently that resume will fail. We really want to be able to *tell* the guest kernel not to try, so it boots cleanly and doesn't just crash. This patch provides a way to opt in to the spec-compliant behaviour on the command line. A follow-up patch may do this automatically for certain "known good" machines based on a DMI match, or perhaps just for all hypervisor guests since there's no good reason a hypervisor would change the hardware_signature that it exposes to guests *unless* it wants them to obey the ACPI specification. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Peter Zijlstra
|
f94909ceb1 |
x86: Prepare asm files for straight-line-speculation
Replace all ret/retq instructions with RET in preparation of making RET a macro. Since AS is case insensitive it's a big no-op without RET defined. find arch/x86/ -name \*.S | while read file do sed -i 's/\<ret[q]*\>/RET/' $file done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org |
||
|
Deepak Sharma
|
a8fb40966f |
x86: ACPI: cstate: Optimize C3 entry on AMD CPUs
All Zen or newer CPU which support C3 shares cache. Its not necessary to flush the caches in software before entering C3. This will cause drop in performance for the cores which share some caches. ARB_DIS is not used with current AMD C state implementation. So set related flags correctly. Signed-off-by: Deepak Sharma <deepak.sharma@amd.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
aa06e20f1b |
x86/ACPI: Don't add CPUs that are not online capable
A number of systems are showing "hotplug capable" CPUs when they are not really hotpluggable. This is because the MADT has extra CPU entries to support different CPUs that may be inserted into the socket with different numbers of cores. Starting with ACPI 6.3 the spec has an Online Capable bit in the MADT used to determine whether or not a CPU is hotplug capable when the enabled bit is not set. Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html?#local-apic-flags Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Maciej W. Rozycki
|
34739a2809 |
x86: Fix typo s/ECLR/ELCR/ for the PIC register
The proper spelling for the acronym referring to the Edge/Level Control Register is ELCR rather than ECLR. Adjust references accordingly. No functional change. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200251080.9461@angie.orcam.me.uk |
||
|
Maciej W. Rozycki
|
d253166168 |
x86: Avoid magic number with ELCR register accesses
Define PIC_ELCR1 and PIC_ELCR2 macros for accesses to the ELCR registers implemented by many chipsets in their embedded 8259A PIC cores, avoiding magic numbers that are difficult to handle, and complementing the macros we already have for registers originally defined with discrete 8259A PIC implementations. No functional change. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2107200237300.9461@angie.orcam.me.uk |
||
|
Linus Torvalds
|
5e6928249b |
ACPI updates for 5.14-rc1
- Update ACPICA code in the kernel to upstrea revision 20210604
including the following changes:
* Add defines for the CXL Host Bridge Structureand and add the
CFMWS structure definition to CEDT (Alison Schofield).
* iASL: Finish support for the IVRS ACPI table (Bob Moore).
* iASL: Add support for the SVKL table (Bob Moore).
* iASL: Add full support for RGRT ACPI table (Bob Moore).
* iASL: Add support for the BDAT ACPI table (Bob Moore).
* iASL: add disassembler support for PRMT (Erik Kaneda).
* Fix memory leak caused by _CID repair function (Erik Kaneda).
* Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
* Add PRMT module header to facilitate parsing (Erik Kaneda).
* Add _PLD panel positions (Fabian Wüthrich).
* MADT: add Multiprocessor Wakeup Mailbox Structure and the
SVKL table headers (Kuppuswamy Sathyanarayanan).
* Use ACPI_FALLTHROUGH (Wei Ming Chen).
- Add preliminary support for the Platform Runtime Mechanism (PRM)
to allow the AML interpreter to call PRM functions (Erik Kaneda).
- Address some issues related to the handling of device dependencies
reported by _DEP in the ACPI device enumeration code and clean up
some related pieces of it (Rafael Wysocki).
- Improve the tracking of states of ACPI power resources (Rafael
Wysocki).
- Improve ACPI support for suspend-to-idle on AMD systems (Alex
Deucher, Mario Limonciello, Pratik Vishwakarma).
- Continue the unification and cleanup of message printing in the
ACPI code (Hanjun Guo, Heiner Kallweit).
- Fix possible buffer overrun issue with the description_show()
sysfs attribute method (Krzysztof Wilczyński).
- Improve the acpi_mask_gpe kernel command line parameter handling
and clean up the core ACPI code related to sysfs (Andy Shevchenko,
Baokun Li, Clayton Casciato).
- Postpone bringing devices in the general ACPI PM domain to D0
during resume from system-wide suspend until they are really
needed (Dmitry Torokhov).
- Make the ACPI processor driver fix up C-state latency if not
ordered (Mario Limonciello).
- Add support for identifying devices depening on the given one
that are not its direct descendants with the help of _DEP (Daniel
Scally).
- Extend the checks related to ACPI IRQ overrides on x86 in order to
avoid false-positives (Hui Wang).
- Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).
- Rearrange the ACPI fan driver and device power management code to
use a common list of device IDs (Rafael Wysocki).
- Fix clang CFI violation in the ACPI BGRT table parsing code and
clean it up (Nathan Chancellor).
- Add GPE-related quirks for some laptops to the EC driver (Chris
Chiu, Zhang Rui).
- Make the ACPI PPTT table parsing code populate the cache-id
value if present in the firmware (James Morse).
- Remove redundant clearing of context->ret.pointer from
acpi_run_osc() (Hans de Goede).
- Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).
- Make ACPI APEI handle ARM Processor Error CPER records like
Memory Error ones to avoid user space task lockups (Xiaofei Tan).
- Stop warning about disabled ACPI in APEI (Jon Hunter).
- Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
R. Silva).
- Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).
- Initialize local variable to avoid garbage being returned (Colin
Ian King).
- Simplify assorted pieces of code, address assorted coding style
and documentation issues and comment typos (Baokun Li, Christophe
JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
Yang Li, Zhen Lei).
-----BEGIN PGP SIGNATURE-----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=S//q
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20210604 upstream
revision, add preliminary support for the Platform Runtime Mechanism
(PRM), address issues related to the handling of device dependencies
in the ACPI device eunmeration code, improve the tracking of ACPI
power resource states, improve the ACPI support for suspend-to-idle on
AMD systems, continue the unification of message printing in the ACPI
code, address assorted issues and clean up the code in a number of
places.
Specifics:
- Update ACPICA code in the kernel to upstrea revision 20210604
including the following changes:
- Add defines for the CXL Host Bridge Structureand and add the
CFMWS structure definition to CEDT (Alison Schofield).
- iASL: Finish support for the IVRS ACPI table (Bob Moore).
- iASL: Add support for the SVKL table (Bob Moore).
- iASL: Add full support for RGRT ACPI table (Bob Moore).
- iASL: Add support for the BDAT ACPI table (Bob Moore).
- iASL: add disassembler support for PRMT (Erik Kaneda).
- Fix memory leak caused by _CID repair function (Erik Kaneda).
- Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
- Add PRMT module header to facilitate parsing (Erik Kaneda).
- Add _PLD panel positions (Fabian Wüthrich).
- MADT: add Multiprocessor Wakeup Mailbox Structure and the SVKL
table headers (Kuppuswamy Sathyanarayanan).
- Use ACPI_FALLTHROUGH (Wei Ming Chen).
- Add preliminary support for the Platform Runtime Mechanism (PRM) to
allow the AML interpreter to call PRM functions (Erik Kaneda).
- Address some issues related to the handling of device dependencies
reported by _DEP in the ACPI device enumeration code and clean up
some related pieces of it (Rafael Wysocki).
- Improve the tracking of states of ACPI power resources (Rafael
Wysocki).
- Improve ACPI support for suspend-to-idle on AMD systems (Alex
Deucher, Mario Limonciello, Pratik Vishwakarma).
- Continue the unification and cleanup of message printing in the
ACPI code (Hanjun Guo, Heiner Kallweit).
- Fix possible buffer overrun issue with the description_show() sysfs
attribute method (Krzysztof Wilczyński).
- Improve the acpi_mask_gpe kernel command line parameter handling
and clean up the core ACPI code related to sysfs (Andy Shevchenko,
Baokun Li, Clayton Casciato).
- Postpone bringing devices in the general ACPI PM domain to D0
during resume from system-wide suspend until they are really needed
(Dmitry Torokhov).
- Make the ACPI processor driver fix up C-state latency if not
ordered (Mario Limonciello).
- Add support for identifying devices depening on the given one that
are not its direct descendants with the help of _DEP (Daniel
Scally).
- Extend the checks related to ACPI IRQ overrides on x86 in order to
avoid false-positives (Hui Wang).
- Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).
- Rearrange the ACPI fan driver and device power management code to
use a common list of device IDs (Rafael Wysocki).
- Fix clang CFI violation in the ACPI BGRT table parsing code and
clean it up (Nathan Chancellor).
- Add GPE-related quirks for some laptops to the EC driver (Chris
Chiu, Zhang Rui).
- Make the ACPI PPTT table parsing code populate the cache-id value
if present in the firmware (James Morse).
- Remove redundant clearing of context->ret.pointer from
acpi_run_osc() (Hans de Goede).
- Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).
- Make ACPI APEI handle ARM Processor Error CPER records like Memory
Error ones to avoid user space task lockups (Xiaofei Tan).
- Stop warning about disabled ACPI in APEI (Jon Hunter).
- Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
R. Silva).
- Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).
- Initialize local variable to avoid garbage being returned (Colin
Ian King).
- Simplify assorted pieces of code, address assorted coding style and
documentation issues and comment typos (Baokun Li, Christophe
JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
Yang Li, Zhen Lei)"
* tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (97 commits)
ACPI: PM: postpone bringing devices to D0 unless we need them
ACPI: tables: Add custom DSDT file as makefile prerequisite
ACPI: bgrt: Use sysfs_emit
ACPI: bgrt: Fix CFI violation
ACPI: EC: trust DSDT GPE for certain HP laptop
ACPI: scan: Simplify acpi_table_events_fn()
ACPI: PM: Adjust behavior for field problems on AMD systems
ACPI: PM: s2idle: Add support for new Microsoft UUID
ACPI: PM: s2idle: Add support for multiple func mask
ACPI: PM: s2idle: Refactor common code
ACPI: PM: s2idle: Use correct revision id
ACPI: sysfs: Remove tailing return statement in void function
ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
ACPI: sysfs: Sort headers alphabetically
ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
ACPI: sysfs: Unify pattern of memory allocations
ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
ACPI: sysfs: Make sparse happy about address space in use
ACPI: scan: Fix race related to dropping dependencies
ACPI: scan: Reorganize acpi_device_add()
...
|
||
|
Pu Wen
|
280b68a3b3 |
x86/cstate: Allow ACPI C1 FFH MWAIT use on Hygon systems
Hygon systems support the MONITOR/MWAIT instructions and these can be used for ACPI C1 in the same way as on AMD and Intel systems. The BIOS declares a C1 state in _CST to use FFH and CPUID_Fn00000005_EDX is non-zero on Hygon systems. Allow ffh_cstate_init() to succeed on Hygon systems to default using FFH MWAIT instead of HALT for ACPI C1. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210528081417.31474-1-puwen@hygon.cn |
||
|
Heiner Kallweit
|
14fad24d05 |
x86/acpi: Switch to pr_xxx log functions
Switching to pr_debug et al has two benefits: - We don't have to add PREFIX to each log statement - Debug output is suppressed except DEBUG is defined or dynamic debugging is enabled for the respective code piece. In addition ensure that longer messages aren't split to multiple lines in source code, checkpatch complains otherwise. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
ea5bc7b977 |
Trivial cleanups and fixes all over the place.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGmYIACgkQEsHwGGHe VUr45w/8CSXr7MXaFBj4To0hTWJXSZyF6YGqlZOSJXFcFh4cWTNwfVOoFaV47aDo +HsCNTkGENcKhLrDUWDRiG/Uo46jxtOtl1vhq7U4pGemSYH871XWOKfb5k5XNMwn /uhaHMI4aEfd6bUFnF518NeyRIsD0BdqFj4tB7RbAiyFwdETDX9Tkj/uBKnQ4zon 4tEDoXgThuK5YKK9zVQg5pa7aFp2zg1CAdX/WzBkS8BHVBPXSV0CF97AJYQOM/V+ lUHv+BN3wp97GYHPQMPsbkNr8IuFoe2mIvikwjxg8iOFpzEU1G1u09XV9R+PXByX LclFTRqK/2uU5hJlcsBiKfUuidyErYMRYImbMAOREt2w0ogWVu2zQ7HkjVve25h1 sQPwPudbAt6STbqRxvpmB3yoV4TCYwnF91FcWgEy+rcEK2BDsHCnScA45TsK5I1C kGR1K17pHXprgMZFPveH+LgxewB6smDv+HllxQdSG67LhMJXcs2Epz0TsN8VsXw8 dlD3lGReK+5qy9FTgO7mY0xhiXGz1IbEdAPU4eRBgih13puu03+jqgMaMabvBWKD wax+BWJUrPtetwD5fBPhlS/XdJDnd8Mkv2xsf//+wT0s4p+g++l1APYxeB8QEehm Pd7Mvxm4GvQkfE13QEVIPYQRIXCMH/e9qixtY5SHUZDBVkUyFM0= =bO1i -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 cleanups from Borislav Petkov: "Trivial cleanups and fixes all over the place" * tag 'x86_cleanups_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove me from IDE/ATAPI section x86/pat: Do not compile stubbed functions when X86_PAT is off x86/asm: Ensure asm/proto.h can be included stand-alone x86/platform/intel/quark: Fix incorrect kernel-doc comment syntax in files x86/msr: Make locally used functions static x86/cacheinfo: Remove unneeded dead-store initialization x86/process/64: Move cpu_current_top_of_stack out of TSS tools/turbostat: Unmark non-kernel-doc comment x86/syscalls: Fix -Wmissing-prototypes warnings from COND_SYSCALL() x86/fpu/math-emu: Fix function cast warning x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes x86: Fix various typos in comments, take #2 x86: Remove unusual Unicode characters from comments x86/kaslr: Return boolean values from a function returning bool x86: Fix various typos in comments x86/setup: Remove unused RESERVE_BRK_ARRAY() stacktrace: Move documentation for arch_stack_walk_reliable() to header x86: Remove duplicate TSC DEADLINE MSR definitions |
||
|
Walter Wu
|
02c587733c |
kasan: remove redundant config option
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes:
|
||
|
Rafael J. Wysocki
|
1a1c130ab7 |
ACPI: tables: x86: Reserve memory occupied by ACPI tables
The following problem has been reported by George Kennedy:
Since commit
|
||
|
Ingo Molnar
|
d9f6e12fb0 |
x86: Fix various typos in comments
Fix ~144 single-word typos in arch/x86/ code comments. Doing this in a single commit should reduce the churn. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org |
||
|
Josh Poimboeuf
|
aeb818fcc9 |
x86/acpi: Support objtool validation in wakeup_64.S
The OBJECT_FILES_NON_STANDARD annotation is used to tell objtool to ignore a file. File-level ignores won't work when validating vmlinux.o. Instead, tell objtool to ignore do_suspend_lowlevel() directly with the STACK_FRAME_NON_STANDARD annotation. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/269eda576c53bc9ecc8167c211989111013a67aa.1611263462.git.jpoimboe@redhat.com |
||
|
Josh Poimboeuf
|
f83d1a0190 |
x86/acpi: Annotate indirect branch as safe
This indirect jump is harmless; annotate it to keep objtool's retpoline validation happy. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/a7288e7043265d95c1a5d64f9fd751ead4854bdc.1611263462.git.jpoimboe@redhat.com |
||
|
Andrey Konovalov
|
d56a9ef84b |
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
There's a config option CONFIG_KASAN_STACK that has to be enabled for KASAN to use stack instrumentation and perform validity checks for stack variables. There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled. Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is enabled. Note, that CONFIG_KASAN_STACK is an option that is currently always defined when CONFIG_KASAN is enabled, and therefore has to be tested with #if instead of #ifdef. Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3 Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Smita Koralahalli
|
4a24d80b8c |
x86/mce, cper: Pass x86 CPER through the MCA handling chain
The kernel uses ACPI Boot Error Record Table (BERT) to report fatal errors that occurred in a previous boot. The MCA errors in the BERT are reported using the x86 Processor Error Common Platform Error Record (CPER) format. Currently, the record prints out the raw MSR values and AMD relies on the raw record to provide MCA information. Extract the raw MSR values of MCA registers from the BERT and feed them into mce_log() to decode them properly. The implementation is SMCA-specific as the raw MCA register values are given in the register offset order of the SMCA address space. [ bp: Massage. ] [ Fix a build breakage in patch v1. ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20201119182938.151155-1-Smita.KoralahalliChannabasappa@amd.com |
||
|
Mike Rapoport
|
65fddcfca8 |
mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
ca5999fde0 |
mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jason Yan
|
b5432a699f |
ACPI, x86/boot: make acpi_nobgrt static
Fix the following sparse warning: arch/x86/kernel/acpi/boot.c:48:5: warning: symbol 'acpi_nobgrt' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Qian Cai
|
696ac2e3bf |
x86: ACPI: fix CPU hotplug deadlock
Similar to commit
|