This adds support to re-import omapdrm's own buffers. Importing buffers
allocated by other drivers can be added later, but for now is not needed
(we don't yet have any other exportering drivers to test with).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for mmap'ing buffers via dmabuf. For handling mmap of
cached buffers correctly, fault handling and PTE shootdown are used
to track dirty pages and automagically handle cache flushes before
dma access to the buffer.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a first step for adding ECC support for pstore RAM backend: we
will use the persistent_ram routines, kindly provided by Google.
Basically, persistent_ram is a set of helper routines to deal with the
[optionally] ECC-protected persistent ram regions.
A bit of Makefile, Kconfig and header files adjustments were needed
because of the move.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v3 addresses review comments:
* rotate tables (Jonathan Cameron)
* remove trailing space, add newline in sysfs output (Jonathan Cameron)
* split out patch for reorganization of hmc5843_set_rate() (Jonathan Cameron)
* use static table to describe chip variants (Jonathan Cameron)
v2 addresses review comments:
* fixes and cleanups have been split out (Jonathan Cameron)
* constants are generally prefixed HMC5843_, except when related
specifically to hmc5883 (Jonathan Cameron)
* simplify code and avoid temp buffer in
hmc5843_show_sampling_frequencies_available() (Lars-Peter Clausen)
* use sysfs_streq() instead of strncmp()/strlen() in
hmc5843_check_sampling_frequency() (Lars-Peter Clausen)
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce the module_comedi_usb_driver macro, and the
associated register/unregister functions, which is a
convenience macro for comedi usb driver modules similar
to module_platform_driver. It is intended to be used by
drivers where the init/exit section does nothing but
register/unregister the comedi driver and associated usb
driver. By using this macro it is possible to eliminate
a few lines of boilerplate code per comedi usb driver.
Also, when registering the usb driver check for failure
and unregister the comedi driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the struct addi_board initialization to C99 format and remove
all the NULL or 0 initializers. This makes maintaining and editing the
code simpler and less error prone.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c_get_clientdata(client) points to iio_dev, not hmc5843_data; fixes
issue similar to 62d2feb980
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Remove some unused code stubs that are in #if 0 / #endif
blocks.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use Kconfig logic instead of a rude #error in the driver source,
which breaks m68k-allmodconfig.
Also remove the "default n", as that's the default.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 49b81a3c74.
It causes build breakage under some configurations.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a transition patch to keep things bisectable, just moves
some routines under '#ifndef MODULE'. The code inside the #ifndef
will go away soon, but so far we must support pstore and ram_console.
So, we are about to use persistent_ram with pstore, with the ability
to compile persistent_ram routines as modules. Some parts of
persistent_ram uses memblock_reserve() routine, which is should be
only used built-in code, and thus it is not exported.
These persistent_ram bits are only used by Android's ram_console,
which is always built-in.
Without this patch, we won't able to compile persistent_ram as a
module:
ERROR: "memblock_reserve" [fs/pstore/ramoops.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
(As alternative, we could export memblock_reserve, but the thing
is: we won't need it later.)
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'old_log_footer_size' and 'early' members of struct
persistent_ram_zone, as these were never used at all.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
While moving the struct boardtype, convert it to C99 initializers
to improve code readability. This results is a slight increase in
the total lines of code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.
Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor of the unioxx5 comedi driver to remove all the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides the kernel driver for the GDM72xx WiMAX chips
developed by GCT Semiconductor, Inc., which enables mobile WiMAX
connection on the Linux host.
Signed-off-by: Sage Ahn <syahn@gctsemi.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
