In IRQ/NMI induced VM exits, KVM VMX needs to execute the respective
handlers, which requires the software to create a FRED stack frame,
and use it to invoke the handlers. Add fred_irq_entry_from_kvm() for
this job.
Export fred_entry_from_kvm() because VMX can be compiled as a module.
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-32-xin3.li@intel.com
PUSH_AND_CLEAR_REGS could be used besides actual entry code; in that case
%rbp shouldn't be cleared (otherwise the frame pointer is destroyed) and
UNWIND_HINT shouldn't be added.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-31-xin3.li@intel.com
If the stack frame contains an invalid user context (e.g. due to invalid SS,
a non-canonical RIP, etc.) the ERETU instruction will trap (#SS or #GP).
From a Linux point of view, this really should be considered a user space
failure, so use the standard fault fixup mechanism to intercept the fault,
fix up the exception frame, and redirect execution to fred_entrypoint_user.
The end result is that it appears just as if the hardware had taken the
exception immediately after completing the transition to user space.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-30-xin3.li@intel.com
Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled,
otherwise the existing IDT code is chosen.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-29-xin3.li@intel.com
Add sysvec_install() to install a system interrupt handler into the IDT
or the FRED system interrupt handler table.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-28-xin3.li@intel.com
The code to actually handle kernel and event entry/exit using
FRED. It is split up into two files thus:
- entry_64_fred.S contains the actual entrypoints and exit code, and
saves and restores registers.
- entry_fred.c contains the two-level event dispatch code for FRED.
The first-level dispatch is on the event type, and the second-level
is on the event vector.
[ bp: Fold in an allmodconfig clang build fix:
https://lore.kernel.org/r/20240129064521.5168-1-xin3.li@intel.com
and a CONFIG_IA32_EMULATION=n build fix:
https://lore.kernel.org/r/20240127093728.1323-3-xin3.li@intel.com]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Originally-by: Megha Dey <megha.dey@intel.com>
Co-developed-by: Xin Li <xin3.li@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231209214214.2932-1-xin3.li@intel.com
Like #DB, when occurred on different ring level, i.e., from user or kernel
context, #MCE needs to be handled on different stack: User #MCE on current
task stack, while kernel #MCE on a dedicated stack.
This is exactly how FRED event delivery invokes an exception handler: ring
3 event on level 0 stack, i.e., current task stack; ring 0 event on the
the FRED machine check entry stub doesn't do stack switch.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-26-xin3.li@intel.com
On a FRED system, NMIs nest both with themselves and faults, transient
information is saved into the stack frame, and NMI unblocking only
happens when the stack frame indicates that so should happen.
Thus, the NMI entry stub for FRED is really quite small...
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231216063139.25567-1-xin3.li@intel.com
When occurred on different ring level, i.e., from user or kernel context,
stack, while kernel #DB on a dedicated stack. This is exactly how FRED
event delivery invokes an exception handler: ring 3 event on level 0
stack, i.e., current task stack; ring 0 event on the #DB dedicated stack
specified in the IA32_FRED_STKLVLS MSR. So unlike IDT, the FRED debug
exception entry stub doesn't do stack switch.
On a FRED system, the debug trap status information (DR6) is passed on
the stack, to avoid the problem of transient state. Furthermore, FRED
transitions avoid a lot of ugly corner cases the handling of which can,
and should be, skipped.
The FRED debug trap status information saved on the stack differs from
DR6 in both stickiness and polarity; it is exactly in the format which
debug_read_clear_dr6() returns for the IDT entry points.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-24-xin3.li@intel.com
FRED and IDT can share most of the definitions and declarations so
that in the majority of cases the actual handler implementation is the
same.
The differences are the exceptions where FRED stores exception related
information on the stack and the sysvec implementations as FRED can
handle irqentry/exit() in the dispatcher instead of having it in each
handler.
Also add stub defines for vectors which are not used due to Kconfig
decisions to spare the ifdeffery in the actual FRED dispatch code.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-23-xin3.li@intel.com
On a FRED system, the faulting address (CR2) is passed on the stack,
to avoid the problem of transient state. Thus the page fault address
is read from the FRED stack frame instead of CR2 when FRED is enabled.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-22-xin3.li@intel.com
Entering a new task is logically speaking a return from a system call
(exec, fork, clone, etc.). As such, if ptrace enables single stepping
a single step exception should be allowed to trigger immediately upon
entering user space. This is not optional.
NMI should *never* be disabled in user space. As such, this is an
optional, opportunistic way to catch errors.
Allow single-step trap and NMI when starting a new task, thus once
the new task enters user space, single-step trap and NMI are both
enabled immediately.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-21-xin3.li@intel.com
Because FRED always restores the full value of %rsp, ESPFIX is
no longer needed when it's enabled.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-20-xin3.li@intel.com
SWAPGS is no longer needed thus NOT allowed with FRED because FRED
transitions ensure that an operating system can _always_ operate
with its own GS base address:
- For events that occur in ring 3, FRED event delivery swaps the GS
base address with the IA32_KERNEL_GS_BASE MSR.
- ERETU (the FRED transition that returns to ring 3) also swaps the
GS base address with the IA32_KERNEL_GS_BASE MSR.
And the operating system can still setup the GS segment for a user
thread without the need of loading a user thread GS with:
- Using LKGS, available with FRED, to modify other attributes of the
GS segment without compromising its ability always to operate with
its own GS base address.
- Accessing the GS segment base address for a user thread as before
using RDMSR or WRMSR on the IA32_KERNEL_GS_BASE MSR.
Note, LKGS loads the GS base address into the IA32_KERNEL_GS_BASE MSR
instead of the GS segment's descriptor cache. As such, the operating
system never changes its runtime GS base address.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-19-xin3.li@intel.com
MSR_IA32_FRED_RSP0 is used during ring 3 event delivery, and needs to
be updated to point to the top of next task stack during task switch.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-18-xin3.li@intel.com
When using FRED, reserve space at the top of the stack frame, just
like i386 does.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-17-xin3.li@intel.com
Add a header file for FRED prototypes and definitions.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-16-xin3.li@intel.com
FRED defines additional information in the upper 48 bits of cs/ss
fields. Therefore add the information definitions into the pt_regs
structure.
Specifically introduce a new structure fred_ss to denote the FRED flags
above SS selector, which avoids FRED_SSX_ macros and makes the code
simpler and easier to read.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Originally-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-15-xin3.li@intel.com
struct pt_regs is hard to read because the member or section related
comments are not aligned with the members.
The 'cs' and 'ss' members of pt_regs are type of 'unsigned long' while
in reality they are only 16-bit wide. This works so far as the
remaining space is unused, but FRED will use the remaining bits for
other purposes.
To prepare for FRED:
- Cleanup the formatting
- Convert 'cs' and 'ss' to u16 and embed them into an union
with a u64
- Fixup the related printk() format strings
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Originally-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-14-xin3.li@intel.com
Add MSR numbers for the FRED configuration registers per FRED spec 5.0.
Originally-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-13-xin3.li@intel.com
Add X86_CR4_FRED macro for the FRED bit in %cr4. This bit must not be
changed after initialization, so add it to the pinned CR4 bits.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-12-xin3.li@intel.com
Update the objtool decoder to know about the ERET[US] instructions
(type INSN_CONTEXT_SWITCH).
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-11-xin3.li@intel.com
ERETU returns from an event handler while making a transition to ring 3,
and ERETS returns from an event handler while staying in ring 0.
Add instruction opcodes used by ERET[US] to the x86 opcode map; opcode
numbers are per FRED spec v5.0.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20231205105030.8698-10-xin3.li@intel.com
Let command line option "fred" accept multiple options to make it
easier to tweak its behavior.
Currently, two options 'on' and 'off' are allowed, and the default
behavior is to disable FRED. To enable FRED, append "fred=on" to the
kernel command line.
[ bp: Use cpu_feature_enabled(), touch ups. ]
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-9-xin3.li@intel.com
Add CONFIG_X86_FRED to <asm/disabled-features.h> to make
cpu_feature_enabled() work correctly with FRED.
Originally-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-8-xin3.li@intel.com
Any FRED enabled CPU will always have the following features as its
baseline:
1) LKGS, load attributes of the GS segment but the base address into
the IA32_KERNEL_GS_BASE MSR instead of the GS segment’s descriptor
cache.
2) WRMSRNS, non-serializing WRMSR for faster MSR writes.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-7-xin3.li@intel.com
Add the configuration option CONFIG_X86_FRED to enable FRED.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-6-xin3.li@intel.com
Briefly introduce FRED, and its advantages compared to IDT.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20231205105030.8698-5-xin3.li@intel.com
Intel VT-x classifies events into eight different types, which is inherited
by FRED for event identification. As such, event types becomes a common x86
concept, and should be defined in a common x86 header.
Add event type macros to <asm/trapnr.h>, and use them in <asm/vmx.h>.
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-4-xin3.li@intel.com
idtentry_sysvec is really just DECLARE_IDTENTRY defined in
<asm/idtentry.h>, no need to define it separately.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-3-xin3.li@intel.com
WRMSRNS is an instruction that behaves exactly like WRMSR, with
the only difference being that it is not a serializing instruction
by default. Under certain conditions, WRMSRNS may replace WRMSR to
improve performance.
Add its CPU feature bit, opcode to the x86 opcode map, and an
always inline API __wrmsrns() to embed WRMSRNS into the code.
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231205105030.8698-2-xin3.li@intel.com
- assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on multithreaded
workloads: fstests (in addition to ktest tests) are now checking
slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes
-----BEGIN PGP SIGNATURE-----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=yd+F
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
- A fix for the idle and iowait time accounting vs. CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers
-----BEGIN PGP SIGNATURE-----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=RD6E
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
- 18f14afe28 powerpc/64s: Increase default stack size to 32KB BY: Michael Ellerman
Thanks to:
Michael Ellerman
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTYs9CDOrDQRwKRmtrJvCLnGrjHVgUCZayxkgAKCRDJvCLnGrjH
Vv2hAQDwvyYydFw64D7bnaFJDLvOwi3SL02OBaFYV1JTr8rf/QEA8NcTuqXis5o5
NedFYVE5PhYGWfyPD63aL+JpUKxsXwc=
=Ud9v
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
