This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP
Enhanced Credit Flow Control Mode by default, previously it was only
possible to set it via module parameter (e.g. bluetooth.enable_ecred=1).
Since L2CAP ECRED mode is required by the likes of EATT which is
recommended for LE Audio this enables it by default.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-By: Tedd Ho-Jeong An <tedd.an@intel.com>
poll_sync has been proven to fix races of USB data and event endpoints
so this enables it by default.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This adds CONFIG_BT_HCIBTUSB_POLL_SYNC which can be used to set the
default behavior of Bluetooth USB controller with respect to poll
synchronization of its endpoits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com>
The current version of the configuration structure has unaligned
16-bit fields, but according to the specification [1], access to
the configuration space must be aligned.
Add a second, aligned version of the configuration structure
and a new feature bit indicating that this version is being used.
[1] https://docs.oasis-open.org/virtio/virtio/v1.1/virtio-v1.1.pdf
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.
Fixes: 1241057283 ("Bluetooth: Break add adv into two mgmt commands")
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If hci_register_suspend_notifier() returns error, the hdev and rfkill
are leaked. We could disregard the error and print a warning message
instead to avoid leaks, as it just means we won't be handing suspend
requests.
Fixes: 9952d90ea2 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use kzalloc rather than duplicating its implementation, which makes code
simple and easy to understand.
./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Only assign hdev->wakeup if the serial port supports wakeup. Otherwise
it will fall back to the hci_uart_wakeup or the behavior that can be
overridden before calling the hci_uart_register_device().
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI
address type values, not ISO socket address type values. This makes it
consistent with CIS functions.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For USB ALT 6 settings some Realtek chips need to transmit mSBC data
continuously without the zero length of USB packets.
In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the behavior.
Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific
chip model for the behavior.
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds a data structure for btrealtek object, and the
definition of vendor behavior flags. It also adds macros to set/test/get
the flags.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Device removal is clearly out of virtio spec: it attempts to remove
unused buffers from a VQ before invoking device reset. To fix, make
open/close NOPs and do all cleanup/setup in probe/remove.
NB: This is a hacky way to handle this - virtbt_{open,close} as NOP is
not really what a driver is supposed to be doing. These are transport
enable/disable callbacks from the BT core towards the driver. It maps to
a device being enabled/disabled by something like bluetoothd for
example. So if disabled, users expect that no resources/queues are in
use. It does work with all other transports like USB, SDIO, UART etc.
There should be no buffer used if the device is powered off. We also
don’t have any USB URBs in-flight if the transport is not active.
The way to implement a proper fix would be using vq reset if supported,
or even using a full device reset.
The cost of the hack is a single skb wasted on an unused bt device.
NB2: with this fix in place driver still suffers from a race condition
if an interrupt triggers while device is being reset. To fix, in the
virtbt_close() callback we should deactivate all interrupts. To be
fixed.
squashed fixup: bluetooth: virtio_bt: fix an error code in probe()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220811080943.198245-1-mst@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
If a command is already sent, we take care of freeing it, but we
also need to cancel the timeout as well.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
force_static_address shall be writable while hdev is initing but is not
considered powered yet since the static address is written only when
powered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
This attempts to program the address stored in hdev->static_addr after
the init sequence has been complete:
@ MGMT Command: Set Static A.. (0x002b) plen 6
Address: C0:55:44:33:22:11 (Static)
@ MGMT Event: Command Complete (0x0001) plen 7
Set Static Address (0x002b) plen 4
Status: Success (0x00)
Current settings: 0x00008200
Low Energy
Static Address
@ MGMT Event: New Settings (0x0006) plen 4
Current settings: 0x00008200
Low Energy
Static Address
< HCI Command: LE Set Random.. (0x08|0x0005) plen 6
Address: C0:55:44:33:22:11 (Static)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 7
Set Powered (0x0005) plen 4
Status: Success (0x00)
Current settings: 0x00008201
Powered
Low Energy
Static Address
@ MGMT Event: New Settings (0x0006) plen 4
Current settings: 0x00008201
Powered
Low Energy
Static Address
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Brian Gix <brian.gix@intel.com>
The USB interface between the host and the bluetooth adapter used for
SCO packets uses an USB isochronous endpoint with a fragmentation scheme
that does not tolerate errors. Except USB isochronous transfers do
not provide a reliable stream with guaranteed delivery. (There is no
retry on error, see USB spec v2.0 5.6 and 8.5.5.)
To fragment a packet, the bluetooth HCI simply splits it in parts and
transfer them as-is. The receiver is expected to reconstruct the packet
by assuming the first fragment contains the header and parsing its size
field. There is no error detection either.
If a fragment is lost, the end result is that the kernel is no longer
synchronized and will pass malformed data to the upper layers, since it
has no way to tell if the first fragment is an actual first fragment or
a continuation fragment. Resynchronization can only happen by luck and
requires an unbounded amount of time.
The typical symptom for a HSP/HFP bluetooth headset is that the
microphone stops working and dmesg contains piles of rate-limited
"Bluetooth: hci0: SCO packet for unknown connection handle XXXX"
errors for an indeterminate amount of time, until the kernel accidentally
resynchronize.
A workaround is to ask the upper layer to prevalidate the first fragment
header. This is not possible with user channels so this workaround is
disabled in this case.
This problem is the most severe when using an ath3k adapter on an i.MX 6
board, where packet loss occur regularly, possibly because it is an USB1
device connected on an USB2 hub and this is a special case requiring
split transactions.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On cmd_timeout with no reset_gpio, reset the USB port as a last
resort.
This patch changes the behavior of btusb_intel_cmd_timeout and
btusb_rtl_cmd_timeout.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case of suspend/resume and HCI_RESET (BT On and Off),
ISOC endpoint set to alt setting 0 when no SCO connection exists.
This patch shall avoid resetting of ISOC endpoint to alt setting to 0.
Signed-off-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
for bare-metal enclaves and KVM guests to mitigate single-step
attacks
* Increase batching to speed up enclave release
* Replace kmap/kunmap_atomic() calls
-----BEGIN PGP SIGNATURE-----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=bIXL
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 sgx updates from Dave Hansen:
"The biggest deal in this series is support for a new hardware feature
that allows enclaves to detect and mitigate single-stepping attacks.
There's also a minor performance tweak and a little piece of the
kmap_atomic() -> kmap_local() transition.
Summary:
- Introduce a new SGX feature (Asynchrounous Exit Notification) for
bare-metal enclaves and KVM guests to mitigate single-step attacks
- Increase batching to speed up enclave release
- Replace kmap/kunmap_atomic() calls"
* tag 'x86_sgx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Replace kmap/kunmap_atomic() calls
KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest
x86/sgx: Allow enclaves to use Asynchrounous Exit Notification
x86/sgx: Reduce delay and interference of enclave release
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
- Fix race conditions related to thermal device operations that are not
protected against thermal device removal (Guenter Roeck).
- Fix error code in __thermal_cooling_device_register() (Dan Carpenter).
- Validate new cooling device state (coming from user space) in
cur_state_store() and reuse the max_state value from cooling device
structure in the sysfs interface (Viresh Kumar).
- Fix some possible name leaks in error paths in the thermal control
core code (Yang Yingliang).
- Detect TCC lock bit set in the intel_tcc_cooling driver and make it
refuse to update the TCC offset in that case (Zhang Rui).
- Add TCC cooling support for RaptorLake-S (Zhang Rui).
- Prevent accidental clearing of HFI status by one of the other
drivers using the same status register (Srinivas Pandruvada).
- Protect clearing of thermal status bits in Intel thermal control
drivers (Srinivas Pandruvada).
- Allow the HFI thermal control driver to ACK an HFI event for the
previously observed timestamp (Srinivas Pandruvada).
- Remove a pointless die_id check from the HFI thermal driver and
adjust the definition a data structure used by it (Ricardo Neri).
-----BEGIN PGP SIGNATURE-----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=ZdzX
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes to protect thermal device operations
against thermal device removal, other thermal core fixes and updates
of Intel thermal control drivers.
Specifics:
- Fix race conditions related to thermal device operations that are
not protected against thermal device removal (Guenter Roeck)
- Fix error code in __thermal_cooling_device_register() (Dan
Carpenter)
- Validate new cooling device state (coming from user space) in
cur_state_store() and reuse the max_state value from cooling device
structure in the sysfs interface (Viresh Kumar)
- Fix some possible name leaks in error paths in the thermal control
core code (Yang Yingliang)
- Detect TCC lock bit set in the intel_tcc_cooling driver and make it
refuse to update the TCC offset in that case (Zhang Rui)
- Add TCC cooling support for RaptorLake-S (Zhang Rui)
- Prevent accidental clearing of HFI status by one of the other
drivers using the same status register (Srinivas Pandruvada)
- Protect clearing of thermal status bits in Intel thermal control
drivers (Srinivas Pandruvada)
- Allow the HFI thermal control driver to ACK an HFI event for the
previously observed timestamp (Srinivas Pandruvada)
- Remove a pointless die_id check from the HFI thermal driver and
adjust the definition a data structure used by it (Ricardo Neri)"
* tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: hfi: Remove a pointless die_id check
thermal: core: fix some possible name leaks in error paths
thermal: intel: hfi: ACK HFI for the same timestamp
thermal: intel: Protect clearing of thermal status bits
thermal: intel: Prevent accidental clearing of HFI status
thermal/core: Protect thermal device operations against thermal device removal
thermal/core: Remove thermal_zone_set_trips()
thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex
thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex
thermal/core: Introduce locked version of thermal_zone_device_update
thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp
thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp
thermal/core: Delete device under thermal device zone lock
thermal/core: Destroy thermal zone device mutex in release function
thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S
thermal: intel: intel_tcc_cooling: Detect TCC lock bit
thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages
thermal/core: fix error code in __thermal_cooling_device_register()
thermal: sysfs: Reuse cdev->max_state
thermal: Validate new state in cur_state_store()
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
* Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki).
* Add support for loong_arch-specific APICs in MADT (Huacai Chen).
* Add support for fixed PCIe wake event (Huacai Chen).
* Add EBDA pointer sanity checks (Vit Kabele).
* Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
* Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
* Add a couple of new UUIDs to the known UUID list (Bob Moore).
* Add support for FFH Opregion special context data (Sudeep Holla).
* Improve warning message for "invalid ACPI name" (Bob Moore).
* Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield).
* Prepare IORT support for revision E.e (Robin Murphy).
* Finish support for the CDAT table (Bob Moore).
* Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki).
* Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao).
* Update the version of the ACPICA code in the kernel (Bob Moore).
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
- Clean up the ACPI thermal driver a bit (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmOXV10SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxuOwP/2zew6val2Jf7I/Yxf1iQLlRyGmhFnaH
wpltJvBjlHjAUKnPQ/kLYK9fjuUY5HVgjOE03WpwhFUpmhftYTrSkhoVkJ1Mw9Zl
RNOAEgCG484ThHiTIVp/dMPxrtfuqpdbamhWX3Q51IfXjGW8Vc/lDxIa3k/JQxyq
ko8GFPCoebJrSCfuwaAf2+xSQaf6dq4jpL/rlIk+nYMMB9mQmXhNEhc+l97NaCe8
MyCIGynyNbhGsIlwdHRvTp04EIe8h0Z1+Dyns7g/TrzHj3Aezy7QVZbn8sKdZWa1
W/Ck9QST5tfpDWyr+hUXxUJjEn4Yy+GXjM2xON0EMx5q+JD9XsOpwWOVwTR7CS5s
FwEd6I89SC8OZM86AgMtnGxygjpK24R/kGzHjhG15IQCsypc8Rvzoxl0L0YVoon/
UTkE57GzNWVzu0pY/oXJc2aT7lVqFXMFZ6ft/zHnBRnQmrcIi+xgDO5ni5KxctFN
TVFwbAMCuwVx6IOcVQCZM2g4aJw426KpUn19fKnXvPwR5UIufBaCzSKWMiYrtdXr
O5BM8ElYuyKCWGYEE0GSMjZygyDpyY6ENLH7s7P1IEmFyigBzaaGBbKm108JJq4V
eCWJYTAx8pAptsU/vfuMvEQ1ErfhZ3TTokA5Lv0uPf53VcAnWDb7EAbW6ZGMwFSI
IaV6cv6ILoqO
=GVzp
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
- Fix nasty and hard to debug race condition introduced by mistake
in the runtime PM core code and clean up that code somewhat on
top of the fix (Rafael Wysocki).
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
- Fix compiler warnings with make W=1 in the idle_inject power capping
driver (Srinivas Pandruvada).
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET).
- Add SCMI Powercap based power capping driver (Cristian Marussi).
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy).
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn).
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns property in DT example (Serge Semin).
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=B9Uu
-----END PGP SIGNATURE-----
Merge tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include two new drivers (cpufreq driver for Apple SoC CPU
P-states and the SCMI Powercap based power capping driver), other new
hardware support and driver extensions (Qualcomm cpufreq driver and
its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
a bunch of fixes and cleanups all over and a cpupower utility update
including new features related to RAPL support.
Specifics:
- Fix nasty and hard to debug race condition introduced by mistake in
the runtime PM core code and clean up that code somewhat on top of
the fix (Rafael Wysocki)
- Generalize of_perf_domain_get_sharing_cpumask phandle format
(Hector Martin)
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)
- Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
- CPU clock provider support
- Generic cleanups or reorganization
- Potential memleak fix
- Fix of the return value of cpufreq_driver->get()
- Update Qualcomm cpufreq driver's DT bindings (Manivannan
Sadhasivam, Rob Herring, Melody Olvera):
- Support for CPU clock provider
- Missing cache-related properties fixes
- Support for QDU1000/QRU1000
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET)
- Convert cpufreq statistics code to use sysfs_emit_at() (ye
xingchen)
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich)
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
driver (Xiongfeng Wang)
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor)
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada)
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King)
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King)
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko)
- Drop a reference to CVS from cpufreq documentation (Conghui Wang)
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson)
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson)
- Modify the tasks freezing code to avoid using pr_cont() and refine
an error message printed by it (Rafael Wysocki)
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo)
- Fix mistake in a kerneldoc comment in the hibernation code
(xiongxin)
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa)
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
the generic power domains code (Abel Vesa)
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo)
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo)
- Fix compiler warnings with make W=1 in the idle_inject power
capping driver (Srinivas Pandruvada)
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET)
- Add SCMI Powercap based power capping driver (Cristian Marussi)
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy)
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn)
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar)
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt
properties to be present without the others present (James
Calligeros)
- Fix clock-latency-ns property in DT example (Serge Semin)
- Add a private governor_data for devfreq governors (Kant Fan)
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi)
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar)
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli)
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger)"
* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
PM: runtime: Adjust white space in the core code
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: runtime: Relocate rpm_callback() right after __rpm_callback()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
powercap: idle_inject: Fix warnings with make W=1
PM: hibernate: Complain about memory map mismatches during resume
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
...
Currently the KTAP specification says that a test result line is
<result> <number> [<description>][ # [<directive>] [<diagnostic data>]]
and the description of a test can be "any sequence of words
(can't include #)" which specifies that there may be more than
one word but does not specify anything other than those words
which might be used to separate the words which probably isn't
what we want. Given that practically we have tests using a range
of separators for words including combinations of spaces and
combinations of other symbols like underscores or punctuation
let's just clarify that the description can contain any character
other than # (marking the start of the directive/diagnostic) or
newline (marking the end of this test result).
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use macros, VISIBLE_IF_KUNIT and EXPORT_SYMBOL_IF_KUNIT, to allow
static symbols to be conditionally set to be visible during
apparmor_policy_unpack_test, which removes the need to include the testing
file in the implementation file.
Change the namespace of the symbols that are now conditionally visible (by
adding the prefix aa_) to avoid confusion with symbols of the same name.
Allow the test to be built as a module and namespace the module name from
policy_unpack_test to apparmor_policy_unpack_test to improve clarity of
the module name.
Provide an example of how static symbols can be dealt with in testing.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Create two macros:
VISIBLE_IF_KUNIT - A macro that sets symbols to be static if CONFIG_KUNIT
is not enabled. Otherwise if CONFIG_KUNIT is enabled there is no change to
the symbol definition.
EXPORT_SYMBOL_IF_KUNIT(symbol) - Exports symbol into
EXPORTED_FOR_KUNIT_TESTING namespace only if CONFIG_KUNIT is enabled. Must
use MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING) in test file in order to
use symbols.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, kunit_parser.py is stripping all leading whitespace to make
parsing easier. But this means we can't accurately show kernel output
for failing tests or when the kernel crashes.
Embarassingly, this affects even KUnit's own output, e.g.
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] not ok 1 example_simple_test
[13:40:46] [FAILED] example_simple_test
After this change, here's what the output in context would look like
[13:40:46] =================== example (4 subtests) ===================
[13:40:46] # example_simple_test: initializing
[13:40:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] [FAILED] example_simple_test
[13:40:46] [SKIPPED] example_skip_test
[13:40:46] [SKIPPED] example_mark_skipped_test
[13:40:46] [PASSED] example_all_expect_macros_test
[13:40:46] # example: initializing suite
[13:40:46] # example: pass:1 fail:1 skip:2 total:4
[13:40:46] # Totals: pass:1 fail:1 skip:2 total:4
[13:40:46] ===================== [FAILED] example =====================
This example shows one minor cosmetic defect this approach has.
The test counts lines prevent us from dedenting the suite-level output.
But at the same time, any form of non-KUnit output would do the same
unless it happened to be indented as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The "How Do I Use This" section of index.rst and "Next Steps" section of
start.rst were just copies of the table of contents, and therefore
weren't really useful either when looking a sphinx generated output
(which already had the TOC visible) or when reading the source (where
it's just a list of files that ls could give you).
Instead, provide a small number of concrete next steps, and a bit more
description about what the pages contain.
This also removes the broken reference to 'tips.rst', which was
previously removed.
Fixed git am whitespace complaints during commit:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 4399c737a97d ("Documentation: kunit: Remove redundant 'tips.rst' page")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We print the "test log" on failure.
This is meant to be all the kernel output that happened during the test.
But we also include the special KTAP lines in it, which are often
redundant.
E.g. we include the "not ok" line in the log, right before we print
that the test case failed...
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] not ok 1 example_simple_test
[13:51:48] [FAILED] example_simple_test
More full example after this patch:
[13:51:48] =================== example (4 subtests) ===================
[13:51:48] # example_simple_test: initializing
[13:51:48] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] [FAILED] example_simple_test
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Change KUnit test output to better comply with KTAP v1 specifications
found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html.
1) Use "KTAP version 1" instead of "TAP version 14" as test output header
2) Remove '-' between test number and test name on test result lines
2) Add KTAP version lines to each subtest header as well
Note that the new KUnit output still includes the “# Subtest” line now
located after the KTAP version line. This does not completely match the
KTAP v1 spec but since it is classified as a diagnostic line, it is not
expected to be disruptive or break any existing parsers. This
“# Subtest” line comes from the TAP 14 spec
(https://testanything.org/tap-version-14-specification.html) and it is
used to define the test name before the results.
Original output:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
New output:
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Change the KUnit parser to be able to parse test output that complies with
the KTAP version 1 specification format found here:
https://kernel.org/doc/html/latest/dev-tools/ktap.html. Ensure the parser
is able to parse tests with the original KUnit test output format as
well.
KUnit parser now accepts any of the following test output formats:
Original KUnit test output format:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
KTAP version 1 test output format:
KTAP version 1
1..1
KTAP version 1
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
ok 1 kunit-test-suite
New KUnit test output format (changes made in the next patch of
this series):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use the newly-added function kunit_get_current_test() instead of
accessing current->kunit_test directly. This function uses a static key
to return more quickly when KUnit is enabled, but no tests are actively
running. There should therefore be a negligible performance impact to
enabling the slub KUnit tests.
Other than the performance improvement, this should be a no-op.
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to detect if a KUnit test is running, and to access its
context, the 'kunit_test' member of the current task_struct is used.
Usually, this is accessed directly or via the kunit_fail_current_task()
function.
In order to speed up the case where no test is running, add a wrapper,
kunit_get_current_test(), which uses the static key to fail early.
Equally, Speed up kunit_fail_current_test() by using the static key.
This should make it convenient for code to call this
unconditionally in fakes or error paths, without worrying that this will
slow the code down significantly.
If CONFIG_KUNIT=n (or m), this compiles away to nothing. If
CONFIG_KUNIT=y, it will compile down to a NOP (on most architectures) if
no KUnit test is currently running.
Note that kunit_get_current_test() does not work if KUnit is built as a
module. This mirrors the existing restriction on kunit_fail_current_test().
Note that the definition of kunit_fail_current_test() still wraps an
empty, inline function if KUnit is not built-in. This is to ensure that
the printf format string __attribute__ will still work.
Also update the documentation to suggest users use the new
kunit_get_current_test() function, update the example, and to describe
the behaviour when KUnit is disabled better.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit does a few expensive things when enabled. This hasn't been a
problem because KUnit was only enabled on test kernels, but with a few
people enabling (but not _using_) KUnit on production systems, we need a
runtime way of handling this.
Provide a 'kunit_running' static key (defaulting to false), which allows
us to hide any KUnit code behind a static branch. This should reduce the
performance impact (on other code) of having KUnit enabled to a single
NOP when no tests are running.
Note that, while it looks unintuitive, tests always run entirely within
__kunit_test_suites_init(), so it's safe to decrement the static key at
the end of this function, rather than in __kunit_test_suites_exit(),
which is only there to clean up results in debugfs.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When --raw_output is set (to any value), we don't actually parse the
test results. So asking to print the test results as json doesn't make
sense.
We internally create a fake test with one passing subtest, so --json
would actually print out something misleading.
This patch:
* Rewords the flag descriptions so hopefully this is more obvious.
* Also updates --raw_output's description to note the default behavior
is to print out only "KUnit" results (actually any KTAP results)
* also renames and refactors some related logic for clarity (e.g.
test_result => test, it's a kunit_parser.Test object).
Notably, this patch does not make it an error to specify --json and
--raw_output together. This is an edge case, but I know of at least one
wrapper around kunit.py that always sets --json. You'd never be able to
use --raw_output with that wrapper.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently tell people we "couldn't find any KTAP output" with no
indication as to what this might mean.
After this patch, we get:
$ ./tools/testing/kunit/kunit.py parse /dev/null
============================================================
[ERROR] Test: <missing>: Could not find any KTAP output. Did any KUnit tests run?
============================================================
Testing complete. Ran 0 tests: errors: 1
Note: we could try and generate a more verbose message like
> Please check .kunit/test.log to see the raw kernel output.
or the like, but we'd need to know what the build dir was to know where
test.log actually lives.
This patch tries to make a more minimal improvement.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 870f63b7cd78 ("kunit: eliminate KUNIT_INIT_*_ASSERT_STRUCT
macros") removed all the other macros of this type.
But it raced with commit b8a926bea8 ("kunit: Introduce
KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros"), which added another
instance.
Remove KUNIT_INIT_MEM_ASSERTION and just use the generic
KUNIT_INIT_ASSERT macro instead.
Rename the `size` arg to avoid conflicts by appending a "_" (like we did
in the previous commit).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The contents of 'tips.rst' was mostly included in 'usage.rst' way back in
commit 9535743906 ("Documentation: KUnit: Rework writing page to focus on writing tests"),
but the tips page remained behind as well.
The parent patches in this series fill in the gaps, so now 'tips.rst' is
redundant.
Therefore, delete 'tips.rst'.
While I regret breaking any links to 'tips' which might exist
externally, it's confusing to have two subtly different versions of the
same content around.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The existing wording implies that kunit_kmalloc_array() is "the method
under test". We're actually testing the sort() function in that example.
This is because the example was changed in commit 9535743906
("Documentation: KUnit: Rework writing page to focus on writing tests"),
but the wording was not.
Also add a `note` telling people they can use the KUNIT_ASSERT_EQ()
macros from any function. Some users might be coming from a framework
like gUnit where that'll compile but silently do the wrong thing.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
usage.rst had most of the content of the tips.rst page copied over.
But it's missing https://www.kernel.org/doc/html/v6.0/dev-tools/kunit/tips.html#customizing-error-messages
Copy it over so we can retire tips.rst w/o losing content.
And in that process, it also gained a duplicate section about how
KUNIT_ASSERT_*() exit the test case early. Remove that.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These macros exist because passing an initializer list to other macros
is hard.
The goal of these macros is to generate a line like
struct $ASSERT_TYPE __assertion = $APPROPRIATE_INITIALIZER;
e.g.
struct kunit_unary_assertion __assertion = {
.condition = "foo()",
.expected_true = true
};
But the challenge is you can't pass `{.condition=..., .expect_true=...}`
as a macro argument, since the comma means you're actually passing two
arguments, `{.condition=...` and `.expect_true=....}`.
So we'd made custom macros for each different initializer-list shape.
But we can work around this with the following generic macro
#define KUNIT_INIT_ASSERT(initializers...) { initializers }
Note: this has the downside that we have to rename some macros arguments
to not conflict with the struct field names (e.g. `expected_true`).
It's a bit gross, but probably worth reducing the # of macros.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We're using a `with` block above, so the file object is already closed.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let's verify that the parser isn't reporting any errors for valid
inputs.
This change also
* does result.status checking on one line
* makes sure we consistently do it outside of the `with` block
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since we're using Python 3.7+, we can use dataclasses to tersen the
code.
It also lets us create pre-populated TestCounts() objects and compare
them in our unit test. (Before, you could only create empty ones).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mat Martineau says:
====================
mptcp: Fix IPv6 reqsk ops and some netlink error codes
Patch 1 adds some missing error status values for MPTCP path management
netlink commands with invalid attributes.
Patches 2-4 make IPv6 subflows use the correct request_sock_ops
structure and IPv6-specific destructor. The first patch in this group is
a prerequisite change that simplifies the last two patches.
====================
Link: https://lore.kernel.org/r/20221210002810.289674-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.
It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_request_sock_ops structure is specific to IPv4. It should then not
be used with MPTCP subflows on top of IPv6.
For example, it contains the 'family' field, initialised to AF_INET.
This 'family' field is used by TCP FastOpen code to generate the cookie
but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family
will not lead to crashes but displaying/using/checking wrong things.
Note that 'send_reset' callback from request_sock_ops structure is used
in some error paths. It is then also important to use the correct one
for IPv4 or IPv6.
The slab name can also be different in IPv4 and IPv6, it will be used
when printing some log messages. The slab pointer will anyway be the
same because the object size is the same for both v4 and v6. A
BUILD_BUG_ON() has also been added to make sure this size is the same.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To ease the maintenance, it is often recommended to avoid having #ifdef
preprocessor conditions.
Here the section related to CONFIG_MPTCP was quite short but the next
commit needs to add more code around. It is then cleaner to move
specific MPTCP code to functions located in net/mptcp directory.
Now that mptcp_subflow_request_sock_ops structure can be static, it can
also be marked as "read only after init".
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli says:
====================
Update Joakim Zhang entries
Shawn, since you are the i.MX maintainer I added you and the NXP Linux
Team as the de-facto maintainers for those entries, however there may be
other people to list, thanks!
====================
Link: https://lore.kernel.org/r/20221209220519.1542872-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
