New support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers
-----BEGIN PGP SIGNATURE-----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=arjK
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"
* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
-----BEGIN PGP SIGNATURE-----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=t/xl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- Updates to AMBA bus subsystem to drop .owner struct device_driver
initialisations, moving that to code instead.
- Add LPAE privileged-access-never support
- Add support for Clang CFI
- clkdev: report over-sized device or connection strings
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
clkdev: report over-sized strings when creating clkdev entries
ARM: 9393/1: mm: Use conditionals for CFI branches
ARM: 9392/2: Support CLANG CFI
ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
ARM: 9390/2: lib: Annotate loop delay instructions for CFI
ARM: 9389/2: mm: Define prototypes for all per-processor calls
ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
ARM: 9386/2: mm: Use symbol alias for cache functions
ARM: 9385/2: mm: Type-annotate all cache assembly routines
ARM: 9384/2: mm: Make tlbflush routines CFI safe
ARM: 9382/1: ftrace: Define ftrace_stub_graph
ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
ARM: 9356/2: Move asm statements accessing TTBCR into C functions
ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
ARM: 9379/1: coresight: tpda: drop owner assignment
ARM: 9378/1: coresight: etm4x: drop owner assignment
ARM: 9377/1: hwrng: nomadik: drop owner assignment
...
After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for
the currently existing devices, most applications can no longer make
use of the accelerators as in production "you don't run things as root".
To keep the DSA and IAA accelerators usable, hook up a write() method
so that applications can still submit work. In the write method,
sufficient input validation is performed to avoid the security issue
that required the mmap CAP_SYS_RAWIO check.
One complication is that the DSA device allows for indirect ("batched")
descriptors. There is no reasonable way to do the input validation
on these indirect descriptors so the write() method will not allow these
to be submitted to the hardware on affected hardware, and the sysfs
enumeration of support for the opcode is also removed.
Early performance data shows that the performance delta for most common
cases is within the noise.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
On Sapphire Rapids and related platforms, the DSA and IAA devices have an
erratum that causes direct access (for example, by using the ENQCMD or
MOVDIR64 instructions) from untrusted applications to be a security problem.
To solve this, add a flag to the PCI device enumeration and device structures
to indicate the presence/absence of this security exposure. In the mmap()
method of the device, this flag is then used to enforce that the user
has the CAP_SYS_RAWIO capability.
In a future patch, a write() based method will be added that allows untrusted
applications submit work to the accelerator, where the kernel can do
sanity checking on the user input to ensure secure operation of the accelerator.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Introduce the use of C11 standard _Generic in the fsl-edma driver for
handling different TCD field types. Improve code clarity and help
compiler optimization.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240425205947.3436501-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Implement trace event support to enhance logging functionality for
register access and the transfer control descriptor (TCD) context.
This will enable more comprehensive monitoring and analysis of system
activities
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240425205947.3436501-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
file_ida is allocated during cdev open and is freed accordingly
during cdev release. This sequence is guaranteed by driver file
operations. Therefore, there is no need to destroy an already empty
file_ida when the WQ cdev is removed.
Worse, ida_free() in cdev release may happen after destruction of
file_ida per WQ cdev. This can lead to accessing an id in file_ida
after it has been destroyed, resulting in a kernel panic.
Remove ida_destroy(&file_ida) to address these issues.
Fixes: e6fd6d7e5f ("dmaengine: idxd: add a device to represent the file opened")
Signed-off-by: Lijun Pan <lijun.pan@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240130013954.2024231-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410170317.248715-2-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix all kernel-doc warnings under drivers/dma/fsl-dpaa2-qdma.
./scripts/kernel-doc -v -none drivers/dma/fsl-dpaa2-qdma/*
drivers/dma/fsl-dpaa2-qdma/dpdmai.c:262: warning: Function parameter or struct member 'queue_idx' not described in 'dpdmai_set_rx_queue'
drivers/dma/fsl-dpaa2-qdma/dpdmai.c:339: warning: Excess function parameter 'fqid' description in 'dpdmai_get_tx_queue'
...
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404190019.t4IhmbHh-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240418185851.3221726-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New sdma script (sdma-6q: v3.6, sdma-7d: v4.6) support i2c at imx8mp and
imx6ull. So add I2C dma support.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240419150729.1071904-3-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The macros SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V<n> actually related with the
struct sdma_script_start_addrs.
struct sdma_script_start_addrs {
...
/* End of v1 array */
...
/* End of v2 array */
...
/* End of v3 array */
...
/* End of v4 array */
};
When add new field of sdma_script_start_addrs, it is easy to miss update
SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V<n>.
Employ offsetof for SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V<n> macros instead of
hardcoding numbers. the preprocessing stage will calculate the size for
each version automatically.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240419150729.1071904-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240424064508.1886764-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT support in hidma has been broken since commit 37fa4905d2
("dmaengine: qcom_hidma: simplify DT resource parsing") in 2018. The
issue is the of_address_to_resource() calls bail out on success rather
than failure. This driver is for a defunct QCom server platform where
DT use was limited to start with. As it seems no one has noticed the
breakage, just remove the DT support altogether.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240423161413.481670-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-16-4517b091385b@linaro.org
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].
Here the multiplication is obviously safe because the "channels"
member can only be 8 or 2. This value is set when the "vendor_data"
structs are initialized.
static struct vendor_data vendor_pl080 = {
[...]
.channels = 8,
[...]
};
static struct vendor_data vendor_nomadik = {
[...]
.channels = 8,
[...]
};
static struct vendor_data vendor_pl080s = {
[...]
.channels = 8,
[...]
};
static struct vendor_data vendor_pl081 = {
[...]
.channels = 2,
[...]
};
However, using kcalloc() is more appropriate [1] and improves
readability. This patch has no effect on runtime behavior.
Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB72373D9261B3B166048A8E218B392@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the DPDMAI interfaces to support MC firmware up to 10.1x.x, which
major change is to add dpaa domain id support. User space MC controller
tool can create difference dpaa domain for difference virtual environment.
DMA queues can map to difference service priorities.
The MC command was basic compatible original one. The new command use
previous reserved field.
- Add queue number for dpdmai_get_tx(rx)_queue().
- Unified rx(tx)_queue_attr.
- Update pad/reserved field of struct dpdmai_rsp_get_attributes and
struct dpdmai_cmd_queue for new API.
- Update command DPDMAI_SET(GET)_RX_QUEUE and DPDMAI_CMDID_GET_TX_QUEUE
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240409163630.1996052-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The helper function chan2parent is not used and has never been
used since the first commit to the code back in 2010. The function
is redundant and can be removed.
Cleans up clang scan build warning:
drivers/dma/pch_dma.c:158:30: warning: unused function 'chan2parent' [-Wunused-function]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240308134750.2058556-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During the removal of the idxd driver, registered offline callback is
invoked as part of the clean up process. However, on systems with only
one CPU online, no valid target is available to migrate the
perf context, resulting in a kernel oops:
BUG: unable to handle page fault for address: 000000000002a2b8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1470e1067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57
Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
RIP: 0010:mutex_lock+0x2e/0x50
...
Call Trace:
<TASK>
__die+0x24/0x70
page_fault_oops+0x82/0x160
do_user_addr_fault+0x65/0x6b0
__pfx___rdmsr_safe_on_cpu+0x10/0x10
exc_page_fault+0x7d/0x170
asm_exc_page_fault+0x26/0x30
mutex_lock+0x2e/0x50
mutex_lock+0x1e/0x50
perf_pmu_migrate_context+0x87/0x1f0
perf_event_cpu_offline+0x76/0x90 [idxd]
cpuhp_invoke_callback+0xa2/0x4f0
__pfx_perf_event_cpu_offline+0x10/0x10 [idxd]
cpuhp_thread_fun+0x98/0x150
smpboot_thread_fn+0x27/0x260
smpboot_thread_fn+0x1af/0x260
__pfx_smpboot_thread_fn+0x10/0x10
kthread+0x103/0x140
__pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
__pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
<TASK>
Fix the issue by preventing the migration of the perf context to an
invalid target.
Fixes: 81dd4d4d61 ("dmaengine: idxd: Add IDXD performance monitor support")
Reported-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240313214031.1658045-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the i.MX8ULP platform to the eDMA driver. Introduce the use
of the correct FSL_EDMA_DRV_HAS_CHCLK flag to handle per-channel clock
configurations.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-5-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'slave_id' field is redundant as it duplicates the functionality of
'srcid'. Remove 'slave_id' from fsl_edma_chan to eliminate redundancy.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-1-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).
To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.
Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Link: https://lore.kernel.org/r/1711536564-12919-1-git-send-email-jpinto@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In axi_dmac_probe(), there's a mix in using device managed APIs and
explicitly cleaning things in the driver .remove() hook. Move to use
device managed APIs and thus drop the .remove() hook.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240328-axi-dmac-devm-probe-v3-2-523c0176df70@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We need to first free the IRQ before calling of_dma_controller_free().
Otherwise we could get an interrupt and schedule a tasklet while
removing the DMA controller.
Fixes: 0e3b67b348 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Cc: stable@kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240328-axi-dmac-devm-probe-v3-1-523c0176df70@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current xdma_synchronize method does not properly wait for the last
transfer to be done. Due to limitations of the XMDA engine, it is not
possible to stop a transfer in the middle of a descriptor. Said
otherwise, if a stop is requested at the end of descriptor "N" and the OS
is fast enough, the DMA controller will effectively stop immediately.
However, if the OS is slightly too slow to request the stop and the DMA
engine starts descriptor "N+1", the N+1 transfer will be performed until
its end. This means that after a terminate_all, the last descriptor must
remain valid and the synchronization must wait for this last descriptor to
be terminated.
Fixes: 855c2e1d18 ("dmaengine: xilinx: xdma: Rework xdma_terminate_all()")
Fixes: f5c392d106 ("dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-2-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add lockdep asserts to all functions with "vc.lock must be held by
caller" in their documentation. This will help catch cases where these
assumptions do not hold.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-4-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
xilinx_dpdma_chan_done_irq and xilinx_dpdma_chan_vsync_irq are always
called with IRQs disabled from xilinx_dpdma_irq_handler. Therefore we
don't need to save/restore the IRQ flags.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-3-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SSI and SPDIF are dual fifo interface, when support ASRC P2P
with SSI and SPDIF, the src fifo or dst fifo number can be
two.
The p2p watermark level bit 13 and 14 are designed for
these use case. This patch is to complete this function
in driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-3-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update 3bytes buswidth that is supported by sdma.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Acked-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-2-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allocate memory from SoC internal SRAM to reduce DDR access and keep DDR in
lower power state (such as self-referesh) longer.
Check iram_pool before sdma_init() so that ccb/context could be allocated
from iram because DDR maybe in self-referesh in lower power audio case
while sdma still running.
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-1-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().
Fixes: e3fdb1894c ("dmaengine: idma64: set maximum allowed segment size for DMA")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240403024932.3342606-1-nichen@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
drain_workqueue() cannot be called safely in a spinlocked context due to
possible task rescheduling. In the multi-task scenario, calling
queue_work() while drain_workqueue() will lead to a Call Trace as
pushing a work on a draining workqueue is not permitted in spinlocked
context.
Call Trace:
<TASK>
? __warn+0x7d/0x140
? __queue_work+0x2b2/0x440
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x2b2/0x440
queue_work_on+0x28/0x30
idxd_misc_thread+0x303/0x5a0 [idxd]
? __schedule+0x369/0xb40
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread+0xbc/0x1b0
irq_thread_fn+0x21/0x70
irq_thread+0x102/0x1b0
? preempt_count_add+0x74/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The current implementation uses a spinlock to protect event log workqueue
and will lead to the Call Trace due to potential task rescheduling.
To address the locking issue, convert the spinlock to mutex, allowing
the drain_workqueue() to be called in a safe mutex-locked context.
This change ensures proper synchronization when accessing the event log
workqueue, preventing potential Call Trace and improving the overall
robustness of the code.
Fixes: c40bd7d973 ("dmaengine: idxd: process user page faults for completion record")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20240404223949.2885604-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently if the user driver is probed on a workqueue configured for
another driver with SVA not enabled on the system, it will print
out a number of probe failing messages like the following:
[ 264.831140] user: probe of wq13.0 failed with error -95
On some systems, such as GNR, the number of messages can
reach over 100.
Move the SVA feature check to be after the driver name match
check.
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240405213941.3629709-1-jsnitsel@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When iDMA 64-bit device is powered off, the IRQ status register
is all 1:s. This is never happen in real case and signalling that
the device is simply powered off. Don't try to serve interrupts
that are not ours.
Fixes: 667dfed986 ("dmaengine: add a driver for Intel integrated DMA 64-bit")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Closes: https://lore.kernel.org/r/700bbb84-90e1-4505-8ff0-3f17ea8bc631@gmail.com
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240321120453.1360138-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing residual calculation returns an incorrect value when
bytes_xfer == bytes_req. This scenario occurs particularly with drivers
like UART where DMA is scheduled for maximum number of bytes and is
terminated when the bytes inflow stops. At higher baud rates, it could
request the tx_status while there is no bytes left to transfer. This will
lead to incorrect residual being set. Hence return residual as '0' when
bytes transferred equals to the bytes requested.
Fixes: ee17028009 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240315124411.17582-1-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When building with 'make W=1', clang notices that the computed register
values are never actually written back but instead the wrong variable
is set:
drivers/dma/owl-dma.c:244:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable]
244 | u32 regval;
| ^
drivers/dma/owl-dma.c:268:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable]
268 | u32 regval;
| ^
Change these to what was most likely intended.
Fixes: 47e20577c2 ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240322132116.906475-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 22a9d95858 ("dmaengine: pl330: issue_pending waits
until WFP state") as it seems to cause regression in pl330 driver.
Note the issue now exists in mainline so a fix to be done.
Cc: stable@vger.kernel.org
Reported-by: karthikeyan <karthikeyan@linumiz.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs
-----BEGIN PGP SIGNATURE-----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=DZRZ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
