Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.
ext4_mb_regular_allocator
ext4_lock_group(sb, group)
ext4_mb_good_group
// check if the group bbitmap is corrupted
ext4_mb_complex_scan_group
// Scan group gets ac_b_ex but doesn't use it
ext4_unlock_group(sb, group)
ext4_mark_group_bitmap_corrupted(group)
// The block bitmap was corrupted during
// the group unlock gap.
ext4_mb_try_best_found
ext4_lock_group(ac->ac_sb, group)
ext4_mb_use_best_found
mb_mark_used
// Allocating blocks in block bitmap corrupted group
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Determine if bb_fragments is 0 instead of determining bb_free to eliminate
the risk of dividing by zero when the block bitmap is corrupted.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After updating bb_free in mb_free_blocks, it is possible to return without
updating bb_fragments because the block being freed is found to have
already been freed, which leads to inconsistency between bb_free and
bb_fragments.
Since the group may be unlocked in ext4_grp_locked_error(), this can lead
to problems such as dividing by zero when calculating the average fragment
length. Hence move the update of bb_free to after the block double-free
check guarantees that the corresponding statistics are updated only after
the core block bitmap is modified.
Fixes: eabe0444df ("ext4: speed-up releasing blocks on commit")
CC: <stable@vger.kernel.org> # 3.10
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This mostly reverts commit 6bd97bf273 ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz>
Fixes: 6bd97bf273 ("ext4: remove redundant mb_regenerate_buddy()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Otherwise operating on an incorrupted block bitmap can lead to all sorts
of unknown problems.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_move_extents(), moved_len is only updated when all moves are
successfully executed, and only discards orig_inode and donor_inode
preallocations when moved_len is not zero. When the loop fails to exit
after successfully moving some extents, moved_len is not updated and
remains at 0, so it does not discard the preallocations.
If the moved extents overlap with the preallocated extents, the
overlapped extents are freed twice in ext4_mb_release_inode_pa() and
ext4_process_freed_data() (as described in commit 94d7c16cbb ("ext4:
Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is
incremented twice. Hence when trim is executed, a zero-division bug is
triggered in mb_update_avg_fragment_size() because bb_free is not zero
and bb_fragments is zero.
Therefore, update move_len after each extent move to avoid the issue.
Reported-by: Wei Chen <harperchen1110@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/r/CAO4mrferzqBUnCag8R3m2zf897ts9UEuhjFQGPtODT92rYyR2Q@mail.gmail.com
Fixes: fcf6b1b729 ("ext4: refactor ext4_move_extents code base")
CC: <stable@vger.kernel.org> # 3.18
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZZ/BCAAKCRBZ7Krx/gZQ
68qqAQD6LtfYLDJGdJM+lNpyiG4BA7coYpPlJtmH7mzL+MbFPgEAnM7XsK6zyvza
3+rEggLM0UFWjg9Ln7Nlq035TeYtFwo=
=w1mD
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc filesystem updates from Al Viro:
"Misc cleanups (the part that hadn't been picked by individual fs
trees)"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
apparmorfs: don't duplicate kfree_link()
orangefs: saner arguments passing in readdir guts
ocfs2_find_match(): there's no such thing as NULL or negative ->d_parent
reiserfs_add_entry(): get rid of pointless namelen checks
__ocfs2_add_entry(), ocfs2_prepare_dir_for_insert(): namelen checks
ext4_add_entry(): ->d_name.len is never 0
befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
affs: d_obtain_alias(ERR_PTR(...)) will do the right thing
/proc/sys: use d_splice_alias() calling conventions to simplify failure exits
hostfs: use d_splice_alias() calling conventions to simplify failure exits
udf_fiiter_add_entry(): check for zero ->d_name.len is bogus...
udf: d_obtain_alias(ERR_PTR(...)) will do the right thing...
udf: d_splice_alias() will do the right thing on ERR_PTR() inode
nfsd: kill stale comment about simple_fill_super() requirements
bfs_add_entry(): get rid of pointless ->d_name.len checks
nilfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing...
zonefs: d_splice_alias() will do the right thing on ERR_PTR() inode
broken in 6.5; we really can't lock two unrelated directories
without holding ->s_vfs_rename_mutex first and in case of
same-parent rename of a subdirectory 6.5 ends up doing just
that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZZ+lyQAKCRBZ7Krx/gZQ
60MWAP94hTqeMIpjhsUIkrTnylrIFaiw4UCWFJzIRG1QQYKqCgD/XUaWI9np7dL6
0wR/j4CQSdJjiEFKUFE2pD3QoSuJYAQ=
=+x0+
-----END PGP SIGNATURE-----
Merge tag 'pull-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull rename updates from Al Viro:
"Fix directory locking scheme on rename
This was broken in 6.5; we really can't lock two unrelated directories
without holding ->s_vfs_rename_mutex first and in case of same-parent
rename of a subdirectory 6.5 ends up doing just that"
* tag 'pull-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rename(): avoid a deadlock in the case of parents having no common ancestor
kill lock_two_inodes()
rename(): fix the locking of subdirectories
f2fs: Avoid reading renamed directory if parent does not change
ext4: don't access the source subdirectory content on same-directory rename
ext2: Avoid reading renamed directory if parent does not change
udf_rename(): only access the child content on cross-directory rename
ocfs2: Avoid touching renamed directory if parent does not change
reiserfs: Avoid touching renamed directory if parent does not change
mostly in the fstrim and mballoc code paths. Also enable
dioread_nolock in the case where the block size is less than the page
size. (Dioread_nolock has been default in the bs == ps case for quite
some time.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmWe6MMACgkQ8vlZVpUN
gaM/gAf/e9j4yCAR/W23cICNh/9hw2U0HItEONZF7GDfySlGADL5dsOADe58jLY9
g8UwBpHptOcyxmMTYgdKPQ2YpUF+3Kd4oi2M1Q6CjeeBeRbwuzT4lMTeKrtMEgiz
Ns8mqBgGX3DIXjcbkdO9QdLZPBj07djamAIQlWVLHAR2w6LPgiBhHebUSe+36Ufk
xLaj5X2nkdTtPcN1EnlTYNR+zMLyAwXUsxKf44aUveRwiNAfLGBgY9yvFby7hC+6
ENCP1WsalvVnaI8mr9pgt1KTXIrElknA1bbiWJ9RZ5Y8Za+MEHxXBKpP/AStX8Nc
WEo7a9tNB1AXU04+/SgVp9GAkXEViA==
=Zk8h
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various ext4 bug fixes and cleanups. The fixes are mostly in the
fstrim and mballoc code paths.
Also enable dioread_nolock in the case where the block size is less
than the page size (dioread_nolock has been default in the bs == ps
case for quite some time)"
* tag 'ext4_for_linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix inconsistent between segment fstrim and full fstrim
ext4: fallback to complex scan if aligned scan doesn't work
ext4: convert ext4_da_do_write_end() to take a folio
ext4: allow for the last group to be marked as trimmed
ext4: move ext4_check_bdev_write_error() into nojournal mode
jbd2: abort journal when detecting metadata writeback error of fs dev
jbd2: remove unused 'JBD2_CHECKPOINT_IO_ERROR' and 'j_atomic_flags'
jbd2: replace journal state flag by checking errseq
jbd2: add errseq to detect client fs's bdev writeback error
ext4: improving calculation of 'fe_{len|start}' in mb_find_extent()
ext4: clarify handling of unwritten bh in __ext4_block_zero_page_range()
ext4: treat end of range as exclusive in ext4_zero_range()
ext4: enable dioread_nolock as default for bs < ps case
ext4: delete redundant calculations in ext4_mb_get_buddy_page_lock()
ext4: reduce unnecessary memory allocation in alloc_flex_gd()
ext4: avoid online resizing failures due to oversized flex bg
ext4: remove unnecessary check from alloc_flex_gd()
ext4: unify the type of flexbg_size to unsigned int
Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with
mininum length of trimmed range set to 8 blocks. If we have say a range of
blocks 10-22 free, this range will not be trimmed because it straddles the
boundary of the two FITRIM ranges and neither part is big enough. This is a
bit surprising to some users that call FITRIM on smaller ranges of blocks
to limit impact on the system. Also XFS trims all free space extents that
overlap with the specified range so we are inconsistent among filesystems.
Let's change ext4_try_to_trim_range() to consider for trimming the whole
free space extent that straddles the end of specified range, not just the
part of it within the range.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently in case the goal length is a multiple of stripe size we use
ext4_mb_scan_aligned() to find the stripe size aligned physical blocks.
In case we are not able to find any, we again go back to calling
ext4_mb_choose_next_group() to search for a different suitable block
group. However, since the linear search always begins from the start,
most of the times we end up with the same BG and the cycle continues.
With large fliesystems, the CPU can be stuck in this loop for hours
which can slow down the whole system. Hence, until we figure out a
better way to continue the search (rather than starting from beginning)
in ext4_mb_choose_next_group(), lets just fallback to
ext4_mb_complex_scan_group() in case aligned scan fails, as it is much
more likely to find the needed blocks.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ee033f6dfa0a7f2934437008a909c3788233950f.1702455010.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's nothing page-specific happening in ext4_da_do_write_end();
it's merely used for its refcount & lock, both of which are folio
properties. Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231214053035.1018876-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The ext4 filesystem tracks the trim status of blocks at the group
level. When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.
Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.
ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected. Rearrange the function slightly to make
it clear what we are calculating and returning.
Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt
Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed
Fixes: 45e4ab320c ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUx4wAKCRCRxhvAZXjc
osaNAQC/c+xXVfiq/pFbuK9MQLna4RGZaGcG9k312YniXbHq0AD9HAf4aPcZwPy1
/wkD4pauj3UZ3f0xBSyazGBvAXyN0Qc=
=iFAQ
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
Since JBD2 takes care of all metadata writeback errors of fs dev,
ext4_check_bdev_write_error() is useful only in nojournal mode.
Move it into '!ext4_handle_valid(handle)' branch.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-6-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After first execution of mb_find_order_for_block():
'fe_start' is the value of 'block' passed in mb_find_extent().
'fe_len' is the difference between the length of order-chunk and
remainder of the block divided by order-chunk.
And 'next' does not require initialization after above modifications.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231113082617.11258-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As an optimization, I was trying to work on exiting early from this
function if dealing with unwritten extent since they anyways read 0.
However, it was realised that there are certain code paths that can
end up calling ext4_block_zero_page_range() for an unwritten bh that
might still have data in pagecache. In this case, we can't exit early
and we do require to process the bh and zero out the pagecache to ensure
that a writeback can't kick in at a later time and flush the stale
pagecache to disk.
Since, adding the logic to exit early for unwritten bh was turning out
to be much more nuanced and the current code already handles it well,
just add a comment to explicitly document this behavior.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d859b7ae5fe42e6626479b91ed9f4da3aae4c597.1698856309.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
dioread_nolock was originally disabled as a default option for bs < ps
scenarios due to a data corruption issue. Since then, we've had some
fixes in this area which address such issues. Enable dioread_nolock by
default and remove the experimental warning message for bs < ps path.
dioread for bs < ps has been tested on a 64k pagesize machine using:
kvm-xfstest -C 3 -g auto
with the following configs:
64k adv bigalloc_4k bigalloc_64k data_journal encrypt
dioread_nolock dioread_nolock_4k ext3 ext3conv nojournal
And no new regressions were seen compared to baseline kernel.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231101154717.531865-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
'blocks_per_page' is always 1 after 'if (blocks_per_page >= 2)',
'pnum' and 'block' are equal in this case.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231024035215.29474-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert the function to be compatible with writepage_t so that it can be
passed to write_cache_pages() by blkdev. This removes a call to
compound_head(). We can also remove the function export as both callers
are built-in.
Link: https://lkml.kernel.org/r/20231215200245.748418-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
That bogosity goes back to the initial merge of ext3. Once upon a time
ext2 used to have a similar check; that got taken out during the switch
to page cache (June 2001). ext3 got merged into mainline 5 months later,
still using buffer cache for directories; removal of the pointless check
in ext2 should've been done as a separate patch, but it hadn't been,
so that thing got missed...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When a large flex_bg file system is resized, the number of groups to be
added may be small, and a large amount of memory that will not be used will
be allocated. Therefore, resize_bg can be set to the size after the number
of new_group_data to be used is aligned upwards to the power of 2. This
does not affect the disk layout after online resize and saves some memory.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we online resize an ext4 filesystem with a oversized flexbg_size,
mkfs.ext4 -F -G 67108864 $dev -b 4096 100M
mount $dev $dir
resize2fs $dev 16G
the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
<TASK>
__kmalloc_large_node+0xa2/0x200
__kmalloc+0x16e/0x290
ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xf0/0x150
do_syscall_64+0x3b/0x90
==================================================================
This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:
(PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845
And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit 967ac8af44 ("ext4: fix potential integer overflow in
alloc_flex_gd()"), an overflow check is added to alloc_flex_gd() to
prevent the allocated memory from being smaller than expected due to
the overflow. However, after kmalloc() is replaced with kmalloc_array()
in commit 6da2ec5605 ("treewide: kmalloc() -> kmalloc_array()"), the
kmalloc_array() function has an overflow check, so the above problem
will not occur. Therefore, the extra check is removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The maximum value of flexbg_size is 2^31, but the maximum value of int
is (2^31 - 1), so overflow may occur when the type of flexbg_size is
declared as int.
For example, when uninit_mask is initialized in ext4_alloc_group_tables(),
if flexbg_size == 2^31, the initialized uninit_mask is incorrect, and this
may causes set_flexbg_block_bitmap() to trigger a BUG_ON().
Therefore, the flexbg_size type is declared as unsigned int to avoid
overflow and memory waste.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231023013057.2117948-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.
Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Add folio_zero_tail() and folio_fill_tail()".
I'm trying to make it easier for filesystems with tailpacking / stuffing /
inline data to use folios. The primary function here is
folio_fill_tail(). You give it a pointer to memory where the data
currently is, and it takes care of copying it into the folio at that
offset. That works for gfs2 & iomap. Then There's Ext4. Rather than gin
up some kind of specialist "Here's a two pointers to two blocks of memory"
routine, just let it do its current thing, and let it call
folio_zero_tail(), which is also called by folio_fill_tail().
Other filesystems can be converted later; these ones seemed like good
examples as they're already partly or completely converted to folios.
This patch (of 3):
Instead of unmapping the folio after copying the data to it, then mapping
it again to zero the tail, provide folio_zero_tail() to zero the tail of
an already-mapped folio.
[akpm@linux-foundation.org: fix kerneldoc argument ordering]
Link: https://lkml.kernel.org/r/20231107212643.3490372-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231107212643.3490372-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.
Reported-by: <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f8 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:4653!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
Hardware name: linux,dummy-virt (DT)
pc : ext4_mb_use_inode_pa+0x148/0x208
lr : ext4_mb_use_inode_pa+0x98/0x208
Call trace:
ext4_mb_use_inode_pa+0x148/0x208
ext4_mb_new_inode_pa+0x240/0x4a8
ext4_mb_use_best_found+0x1d4/0x208
ext4_mb_try_best_found+0xc8/0x110
ext4_mb_regular_allocator+0x11c/0xf48
ext4_mb_new_blocks+0x790/0xaa8
ext4_ext_map_blocks+0x7cc/0xd20
ext4_map_blocks+0x170/0x600
ext4_iomap_begin+0x1c0/0x348
=========================================================
Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():
ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
goto adjust_bex;
The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.
The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.
The test case in [Link] can reproduce the above issue with 64k block size.
Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc: <stable@kernel.org> # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can't really afford locking the source on same-directory rename;
currently vfs_rename() tries to do that, but it will have to be changed.
The logics in ext4 is lazy and goes looking for ".." in source even in
same-directory case. It's not hard to get rid of that, leaving that
behaviour only for cross-directory case; that VFS can get locks safely
(and will keep doing that after the coming changes).
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is hard to find where mapping->private_lock, mapping->private_list and
mapping->private_data are used, due to private_XXX being a relatively
common name for variables and structure members in the kernel. To fit
with other members of struct address_space, rename them all to have an
i_ prefix. Tested with an allmodconfig build.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20231117215823.2821906-1-willy@infradead.org
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Ask block layer to not allow other writers to open block device used
for ext4 journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-7-jack@suse.cz
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We removed all codepaths where s_umount is taken beneath open_mutex and
bd_holder_lock so don't make things more complicated than they need to
be and hold s_umount over block device opening.
Link: https://lore.kernel.org/r/20231024-vfs-super-rework-v1-3-37a8aa697148@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:
* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()
Also document the return code.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZUpEaAAKCRCRxhvAZXjc
ounBAQCAoS66gnOZ+k4kOWwB2zZ1Ueh3dPFC7IcEZ+pwFS8hpAEAxUQxV0TSWf5l
W/1oKRtAJyuSYvehHeMUSJmHVBiM8w4=
=bNm0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
tests, as well as cleaning how we update the backup superblock after
online resizes or updating the label or uuid.
Optimize handling of released data blocks in ext4's commit machinery
to avoid a potential lock contention on s_md_lock spinlock.
Fix a number of ext4 bugs:
- fix race between writepages and remount
- fix racy may inline data check in dio write
- add missed brelse in an error path in update_backups
- fix umask handling when ACL support is disabled
- fix lost EIO error when a journal commit races with a fsync of the
blockdev
- fix potential improper i_size when there is a crash right after an
O_SYNC direct write.
- check extent node for validity before potentially using what might
be an invalid pointer
- fix potential stale data exposure when writing to an unwritten extent
and the file system is nearly out of space
- fix potential accounting error around block reservations when writing
partial delayed allocation writes to a bigalloc cluster
- avoid memory allocation failure when tracking partial delayed allocation
writes to a bigalloc cluster
- fix various debugging print messages
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmVBtjsACgkQ8vlZVpUN
gaNynQf+M2hnDsf7bR+szh1j9hmfuGoDfSRwIpCtgwZtrjCD3gIVbxBi9i1N99JK
gc7fyIDaYFOqNb2nLqS3pYtVnD0gd8Da+oV5XphUoEWCjbRP5rBIZssmyaXrgijw
6UtYf3dZ0MM/NkQRBuj7szcG8tFLA1vGRbSHsu3DW6Sv6R3uDbnLEww0bmPDiXhf
SpoJqF/IYXKYJefVZ67MvZvNHgZRjklVVZVgobXQb8JUAvo9OvxGe4FfgaxkoTxv
MOxweNF70iH0OASN03JAptZCxJFZOsMAFvS0fYDk1NH+Z6CLK3tzCOTaZ1R+BDLq
QzdvyETuEJuMT2T02UXoZDoyPNzaGw==
=JTtz
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Cleanup ext4's multi-block allocator, including adding some unit
tests, as well as cleaning how we update the backup superblock after
online resizes or updating the label or uuid.
Optimize handling of released data blocks in ext4's commit machinery
to avoid a potential lock contention on s_md_lock spinlock.
Fix a number of ext4 bugs:
- fix race between writepages and remount
- fix racy may inline data check in dio write
- add missed brelse in an error path in update_backups
- fix umask handling when ACL support is disabled
- fix lost EIO error when a journal commit races with a fsync of the
blockdev
- fix potential improper i_size when there is a crash right after an
O_SYNC direct write.
- check extent node for validity before potentially using what might
be an invalid pointer
- fix potential stale data exposure when writing to an unwritten
extent and the file system is nearly out of space
- fix potential accounting error around block reservations when
writing partial delayed allocation writes to a bigalloc cluster
- avoid memory allocation failure when tracking partial delayed
allocation writes to a bigalloc cluster
- fix various debugging print messages"
* tag 'ext4_for_linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (41 commits)
ext4: properly sync file size update after O_SYNC direct IO
ext4: fix racy may inline data check in dio write
ext4: run mballoc test with different layouts setting
ext4: add first unit test for ext4_mb_new_blocks_simple in mballoc
ext4: add some kunit stub for mballoc kunit test
ext4: call ext4_mb_mark_context in ext4_group_add_blocks()
ext4: Separate block bitmap and buddy bitmap freeing in ext4_group_add_blocks()
ext4: call ext4_mb_mark_context in ext4_mb_clear_bb
ext4: Separate block bitmap and buddy bitmap freeing in ext4_mb_clear_bb()
ext4: call ext4_mb_mark_context in ext4_mb_mark_diskspace_used
ext4: extend ext4_mb_mark_context to support allocation under journal
ext4: call ext4_mb_mark_context in ext4_free_blocks_simple
ext4: factor out codes to update block bitmap and group descriptor on disk from ext4_mb_mark_bb
ext4: make state in ext4_mb_mark_bb to be bool
jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev
ext4: apply umask if ACL support is disabled
ext4: mark buffer new if it is unwritten to avoid stale data exposure
ext4: move 'ix' sanity check to corrent position
jbd2: fix printk format type for 'io_block' in do_one_pass()
jbd2: print io_block if check data block checksum failed when do recovery
...
Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.
References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
syzbot reports that the following warning from ext4_iomap_begin()
triggers as of the commit referenced below:
if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
return -ERANGE;
This occurs during a dio write, which is never expected to encounter
an inode with inline data. To enforce this behavior,
ext4_dio_write_iter() checks the current inline state of the inode
and clears the MAY_INLINE_DATA state flag to either fall back to
buffered writes, or enforce that any other writers in progress on
the inode are not allowed to create inline data.
The problem is that the check for existing inline data and the state
flag can span a lock cycle. For example, if the ilock is originally
locked shared and subsequently upgraded to exclusive, another writer
may have reacquired the lock and created inline data before the dio
write task acquires the lock and proceeds.
The commit referenced below loosens the lock requirements to allow
some forms of unaligned dio writes to occur under shared lock, but
AFAICT the inline data check was technically already racy for any
dio write that would have involved a lock cycle. Regardless, lift
clearing of the state bit to the same lock critical section that
checks for preexisting inline data on the inode to close the race.
Cc: stable@kernel.org
Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com
Fixes: 310ee0902b ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This update adds support for configuring the crypto data unit size (i.e.
the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZT8acBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+czAQDkStgX1ICJQANnxwbrg/SUVdZjPuFH
sJw3sUVpBR81TwEA/SyWh3YzVNZdpE7PWNrCknrC+qnO8hd9QBEjnQfwIQc=
=t44a
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"This update adds support for configuring the crypto data unit size
(i.e. the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: track master key presence separately from secret
fscrypt: rename fscrypt_info => fscrypt_inode_info
fscrypt: support crypto data unit size less than filesystem block size
fscrypt: replace get_ino_and_lblk_bits with just has_32bit_inodes
fscrypt: compute max_lblk_bits from s_maxbytes and block size
fscrypt: make the bounce page pool opt-in instead of opt-out
fscrypt: make it clearer that key_prefix is deprecated
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc
okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC
YkBLU3lXqQ87nfu28ExFAzh10hG2jwM=
=m4pB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
Rename the default helper for encoding FILEID_INO32_GEN* file handles to
generic_encode_ino32_fh() and convert the filesystems that used the
default implementation to use the generic helper explicitly.
After this change, exportfs_encode_inode_fh() no longer has a default
implementation to encode FILEID_INO32_GEN* file handles.
This is a step towards allowing filesystems to encode non-decodeable
file handles for fanotify without having to implement any
export_operations.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231023180801.2953446-3-amir73il@gmail.com
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert ext4 to use bdev_open_by_dev() and pass the handle around.
CC: linux-ext4@vger.kernel.org
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-22-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit e509ad4d77 ("ext4: use bdev_getblk() to avoid memory
reclaim in readahead path") rightly replaced GFP_NOFAIL allocations by
GFP_NOWAIT allocations, I've occasionally been seeing "page allocation
failure: order:0" warnings under load: all with
ext4_sb_breadahead_unmovable() in the stack. I don't think those warnings
are of any interest: suppress them with __GFP_NOWARN.
Link: https://lkml.kernel.org/r/7bc6ad16-9a4d-dd90-202e-47d6cbb5a136@google.com
Fixes: e509ad4d77 ("ext4: use bdev_getblk() to avoid memory reclaim in readahead path")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Hui Zhu <teawater@antgroup.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all users converted, remove the old create_empty_buffers() and rename
folio_create_empty_buffers() to create_empty_buffers().
Link: https://lkml.kernel.org/r/20231016201114.1928083-28-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove an unnecessary folio->page->folio conversion and take advantage of
the new return value from folio_create_empty_buffers().
Link: https://lkml.kernel.org/r/20231016201114.1928083-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_end_read() is the perfect fit for ext4.
Link: https://lkml.kernel.org/r/20231004165317.1061855-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This makes it harder for accidental or malicious changes to
ext4_xattr_handlers at runtime.
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-3-wedsonaf@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use KUNIT_CASE_PARAM to run mballoc test with different layouts setting.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-13-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Here are prepared work:
1. Include mballoc-test.c to mballoc.c to be able test static function
in mballoc.c.
2. Implement static stub to avoid read IO to disk.
3. Construct fake super_block. Only partial members are set, more members
will be set when more functions are tested.
Then unit test for ext4_mb_new_blocks_simple is added.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Multiblocks allocation will read and write block bitmap and group
descriptor which reside on disk. Add kunit stub to function
ext4_get_group_desc, ext4_read_block_bitmap_nowait, ext4_wait_block_bitmap
and ext4_mb_mark_context to avoid real IO to disk.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch separates block bitmap and buddy bitmap freeing in order to
update block bitmap with ext4_mb_mark_context in following patch.
The reason why this can be sperated is explained in previous submit.
Put the explanation here to simplify the code archeology to
ext4_group_add_blocks():
Separated freeing is safe with concurrent allocation as long as:
1. Firstly allocate block in buddy bitmap, and then in block bitmap.
2. Firstly free block in block bitmap, and then buddy bitmap.
Then freed block will only be available to allocation when both buddy
bitmap and block bitmap are updated by freeing.
Allocation obeys rule 1 already, just do sperated freeing with rule 2.
Separated freeing has no race with generate_buddy as:
Once ext4_mb_load_buddy_gfp is executed successfully, the update-to-date
buddy page can be found in sbi->s_buddy_cache and no more buddy
initialization of the buddy page will be executed concurrently until
buddy page is unloaded. As we always do free in "load buddy, free,
unload buddy" sequence, separated freeing has no race with generate_buddy.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch separates block bitmap and buddy bitmap freeing in order to
update block bitmap with ext4_mb_mark_context in following patch.
Separated freeing is safe with concurrent allocation as long as:
1. Firstly allocate block in buddy bitmap, and then in block bitmap.
2. Firstly free block in block bitmap, and then buddy bitmap.
Then freed block will only be available to allocation when both buddy
bitmap and block bitmap are updated by freeing.
Allocation obeys rule 1 already, just do sperated freeing with rule 2.
Separated freeing has no race with generate_buddy as:
Once ext4_mb_load_buddy_gfp is executed successfully, the update-to-date
buddy page can be found in sbi->s_buddy_cache and no more buddy
initialization of the buddy page will be executed concurrently until
buddy page is unloaded. As we always do free in "load buddy, free,
unload buddy" sequence, separated freeing has no race with generate_buddy.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Call ext4_mb_mark_context in ext4_mb_mark_diskspace_used to:
1. Remove repeat code to normally update bitmap and group descriptor
on disk.
2. Now that we have a common API for marking blocks inuse/free in block
bitmap, use that instead of open coding it in function
ext4_mb_mark_diskspace_used(). The current code was not updating
checksum and other counters. ext4_mb_mark_context() should fix these
consistency problems.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, ext4_mb_mark_context is only called under fast commit
replay path, so there is no valid handle when we update block bitmap
and group descriptor. This patch try to extend ext4_mb_mark_context
to be used by code under journal. There are several improvement:
1. Add "handle_t *handle" to struct ext4_mark_context to journal block
bitmap and group descriptor update inside ext4_mb_mark_context (the
added journal code is based on ext4_mb_mark_diskspace_used where
ext4_mb_mark_context is going to be used.)
2. Adds a flag argument to ext4_mb_mark_context() which controls
a. EXT4_MB_BITMAP_MARKED_CHECK - whether block bitmap checking is needed.
b. EXT4_MB_SYNC_UPDATE - whether dirty buffers (bitmap and group
descriptor) needs sync.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There are several reasons to add a general function ext4_mb_mark_context
to update block bitmap and group descriptor on disk:
1. pair behavior of alloc/free bits. For example,
ext4_mb_new_blocks_simple will update free_clusters in struct flex_groups
in ext4_mb_mark_bb while ext4_free_blocks_simple forgets this.
2. remove repeat code to read from disk, update and write back to disk.
3. reduce future unit test mocks to catch real IO to update structure
on disk.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230928160407.142069-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
** Short Version **
In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().
** Long Version **
The issue mentioned above was resulting in two different bugs:
1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:
* The write was extending i_size.
* The last block of the file was fallocated and had an unwritten extent
* We were near ENOSPC and hence we were switching to non-delayed alloc
allocation.
In this case, the back trace that triggers the bug is as follows:
ext4_da_write_begin()
/* switch to nodelalloc due to low space */
ext4_write_begin()
ext4_should_dioread_nolock() // true since mount flags still have delalloc
__block_write_begin(..., ext4_get_block_unwritten)
__block_write_begin_int()
for(each buffer head in page) {
/* first iteration, this is bh1 which contains i_size */
if (!buffer_mapped)
get_block() /* returns bh with only UNWRITTEN and MAPPED */
/* second iteration, bh2 */
if (!buffer_mapped)
get_block() /* we fail here, could be ENOSPC */
}
if (err)
/*
* this would zero out all new buffers and mark them uptodate.
* Since bh1 was never marked new, we skip it here which causes
* the bug later.
*/
folio_zero_new_buffers();
/* ext4_wrte_begin() error handling */
ext4_truncate_failed_write()
ext4_truncate()
ext4_block_truncate_page()
__ext4_block_zero_page_range()
if(!buffer_uptodate())
ext4_read_bh_lock()
ext4_read_bh() -> ... ext4_submit_bh_wbc()
BUG_ON(buffer_unwritten(bh)); /* !!! */
2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:
fallocate -l 4k testfile
xfs_io -c "pwrite 2k 2k" testfile
# hexdump output will have stale data in from byte 0 to 2k in testfile
hexdump -C testfile
NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:
@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
if (ext4_should_journal_data(inode))
return 0;
/* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
- return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ // return 0;
return 1;
}
After applying this patch to mark buffer as NEW, both the above issues are
fixed.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always overwrite count2 to "EXT4_CLUSTERS_PER_GROUP(sb) -
(first_cluster - start)" after its initialization in for loop
initialization statement .
Just remove unnecessary initialization of count2.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-14-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The sbi->s_group_desc contains array of bh's for block group descriptors
and continuous EXT4_DESC_PER_BLOCK(sb) bg descriptors in single block
share the same bh.
Simply call update_backups for each gdb_bh in sbi->s_group_desc will not
update same group descriptors block for multiple times.
Commit 0acdb8876f ("ext4: don't call update_backups() multiple times for
the same bg") wrongly assumed each block group descriptor in the same block
has a individual bh and unnecessary check was added.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-13-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always call add_new_gdb_meta_bg with first group in mete_bg. Remove the
unnecessary ext4_meta_bg_first_group conversion to simplify the gdbblock
calculation.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We save EXT4_SB(sb) to local variable sbi at beginning of function
ext4_resize_begin. Use sbi directly instead of EXT4_SB(sb) to
remove unnecessary pointer dereference.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove EXT4FS_DEBUG defination in resize.c for following reasons:
1. EXT4FS_DEBUG will enable debug messages, it should only be defined
when debugging.
2. ext4.h included from ext4_jbd2.h after EXT4FS_DEBUG defination will
"#undef EXT4FS_DEBUG", then EXT4FS_DEBUG defination in resize.c can't
actually turn on ext4_debug messages.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The field free_cluster_count in struct ext4_new_group_data should be
in units of clusters. In verify_group_input() this field is being
filled in units of blocks. Fortunately, we don't support online
resizing of bigalloc file systems, and for non-bigalloc file systems,
the cluster size == block size. But fix this in case we do support
online resizing of bigalloc file systems in the future.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.
No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:
ext4_flex_group_add
/* no gdb backup copy for meta bg any more */
setup_new_flex_group_blocks
/* update current group number */
ext4_update_super
sbi->s_groups_count += flex_gd->count;
/*
* if group in meta bg contains backup is added, the primary gdb block
* of the meta bg will be copy to backup in new added group here.
*/
for (; gdb_num <= gdb_num_end; gdb_num++)
update_backups(...)
In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit 0aeaa2559d ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.
The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.
Remove padding data block count to fix the issue for gdb backups.
For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Commit 7a2fcbf7f8 ("ext4: don't use blocks freed but not yet committed in
buddy cache init") added a code to mark as used blocks in the list of not yet
committed freed blocks during initialization of a buddy page. However
ext4_mb_free_metadata() makes sure buddy page is already loaded and takes a
reference to it so it cannot happen that ext4_mb_init_cache() is called
when efd list is non-empty. Just remove the
ext4_mb_generate_from_freelist() call.
Fixes: 7a2fcbf7f85('ext4: don't use blocks freed but not yet committed in buddy cache init')
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_53CBCB1668358AE862684E453DF37B722008@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The last argument of ext4_check_dir_entry is dentry offset int the
file. Luckily this error only results in the wrong offset being
printed in the eventual error message.
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/tencent_F992989953734FD5DE3F88ECB2191A856206@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.
lblk end
| |
v v
-------------------------
| | orig_es
-------------------------
^ ^
len1 is 0 | len2 |
If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When releasing space in jbd, we traverse s_freed_data_list to get the
free range belonging to the current commit transaction. In extreme cases,
the time spent may not be small, and we have observed cases exceeding
10ms. This patch makes running and commit transactions manage their own
free_data_list respectively, eliminating unnecessary traversal.
And in the callback phase of the commit transaction, no one will touch
it except the jbd thread itself, so s_md_lock is no longer needed.
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20230612124017.14115-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It would be better to replace the traditional ternary conditional
operator with max()/min()
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230529070930.37949-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got a WARNING in ext4_add_complete_io:
==================================================================
WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250
CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85
RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4]
[...]
Call Trace:
<TASK>
ext4_end_bio+0xa8/0x240 [ext4]
bio_endio+0x195/0x310
blk_update_request+0x184/0x770
scsi_end_request+0x2f/0x240
scsi_io_completion+0x75/0x450
scsi_finish_command+0xef/0x160
scsi_complete+0xa3/0x180
blk_complete_reqs+0x60/0x80
blk_done_softirq+0x25/0x40
__do_softirq+0x119/0x4c8
run_ksoftirqd+0x42/0x70
smpboot_thread_fn+0x136/0x3c0
kthread+0x140/0x1a0
ret_from_fork+0x2c/0x50
==================================================================
Above issue may happen as follows:
cpu1 cpu2
----------------------------|----------------------------
mount -o dioread_lock
ext4_writepages
ext4_do_writepages
*if (ext4_should_dioread_nolock(inode))*
// rsv_blocks is not assigned here
mount -o remount,dioread_nolock
ext4_journal_start_with_reserve
__ext4_journal_start
__ext4_journal_start_sb
jbd2__journal_start
*if (rsv_blocks)*
// h_rsv_handle is not initialized here
mpage_map_and_submit_extent
mpage_map_one_extent
dioread_nolock = ext4_should_dioread_nolock(inode)
if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN))
mpd->io_submit.io_end->handle = handle->h_rsv_handle
ext4_set_io_unwritten_flag
io_end->flag |= EXT4_IO_END_UNWRITTEN
// now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag
scsi_finish_command
scsi_io_completion
scsi_io_completion_action
scsi_end_request
blk_update_request
req_bio_endio
bio_endio
bio->bi_end_io > ext4_end_bio
ext4_put_io_end_defer
ext4_add_complete_io
// trigger WARN_ON(!io_end->handle && sbi->s_journal);
The immediate cause of this problem is that ext4_should_dioread_nolock()
function returns inconsistent values in the ext4_do_writepages() and
mpage_map_one_extent(). There are four conditions in this function that
can be changed at mount time to cause this problem. These four conditions
can be divided into two categories:
(1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl
(2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount
The two in the first category have been fixed by commit c8585c6fca
("ext4: fix races between changing inode journal mode and ext4_writepages")
and commit cb85f4d23f ("ext4: fix race between writepages and enabling
EXT4_EXTENTS_FL") respectively.
Two cases in the other category have not yet been fixed, and the above
issue is caused by this situation. We refer to the fix for the first
category, when applying options during remount, we grab s_writepages_rwsem
to avoid racing with writepages ops to trigger this problem.
Fixes: 6b523df4fb ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Most of the callers of sb_getblk_gfp() already assumed that they were
passing the entire GFP flags to use. Fix up the two callers that didn't,
and remove the __GFP_NOFAIL from them since they both appear to correctly
handle failure.
Link: https://lkml.kernel.org/r/20230914150011.843330-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hui Zhu <teawater@antgroup.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for implementing lockless slab shrink, use new APIs to
dynamically allocate the ext4-es shrinker, so that it can be freed
asynchronously via RCU. Then it doesn't need to wait for RCU read-side
critical section when releasing the struct ext4_sb_info.
Link: https://lkml.kernel.org/r/20230911094444.68966-31-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Until now, fscrypt has always used the filesystem block size as the
granularity of file contents encryption. Two scenarios have come up
where a sub-block granularity of contents encryption would be useful:
1. Inline crypto hardware that only supports a crypto data unit size
that is less than the filesystem block size.
2. Support for direct I/O at a granularity less than the filesystem
block size, for example at the block device's logical block size in
order to match the traditional direct I/O alignment requirement.
(1) first came up with older eMMC inline crypto hardware that only
supports a crypto data unit size of 512 bytes. That specific case
ultimately went away because all systems with that hardware continued
using out of tree code and never actually upgraded to the upstream
inline crypto framework. But, now it's coming back in a new way: some
current UFS controllers only support a data unit size of 4096 bytes, and
there is a proposal to increase the filesystem block size to 16K.
(2) was discussed as a "nice to have" feature, though not essential,
when support for direct I/O on encrypted files was being upstreamed.
Still, the fact that this feature has come up several times does suggest
it would be wise to have available. Therefore, this patch implements it
by using one of the reserved bytes in fscrypt_policy_v2 to allow users
to select a sub-block data unit size. Supported data unit sizes are
powers of 2 between 512 and the filesystem block size, inclusively.
Support is implemented for both the FS-layer and inline crypto cases.
This patch focuses on the basic support for sub-block data units. Some
things are out of scope for this patch but may be addressed later:
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this
combination usually causes data unit indices to exceed 32 bits, and
thus fscrypt_supported_policy() correctly disallows it. The users who
potentially need this combination are using f2fs. To support it, f2fs
would need to provide an option to slightly reduce its max file size.
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem
described above, but also it will need special code to make DUN
wraparound still happen on a FS block boundary.
- Supporting use case (2) mentioned above. The encrypted direct I/O
code will need to stop requiring and assuming FS block alignment.
This won't be hard, but it belongs in a separate patch.
- Supporting this feature on filesystems other than ext4 and f2fs.
(Filesystems declare support for it via their fscrypt_operations.)
On UBIFS, sub-block data units don't make sense because UBIFS encrypts
variable-length blocks as a result of compression. CephFS could
support it, but a bit more work would be needed to make the
fscrypt_*_block_inplace functions play nicely with sub-block data
units. I don't think there's a use case for this on CephFS anyway.
Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that fs/crypto/ computes the filesystem's lblk_bits from its maximum
file size, it is no longer necessary for filesystems to provide
lblk_bits via fscrypt_operations::get_ino_and_lblk_bits.
It is still necessary for fs/crypto/ to retrieve ino_bits from the
filesystem. However, this is used only to decide whether inode numbers
fit in 32 bits. Also, ino_bits is static for all relevant filesystems,
i.e. it doesn't depend on the filesystem instance.
Therefore, in the interest of keeping things as simple as possible,
replace 'get_ino_and_lblk_bits' with a flag 'has_32bit_inodes'. This
can always be changed back to a function if a filesystem needs it to be
dynamic, but for now a static flag is all that's needed.
Link: https://lore.kernel.org/r/20230925055451.59499-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Replace FS_CFLG_OWN_PAGES with a bit flag 'needs_bounce_pages' which has
the opposite meaning. I.e., filesystems now opt into the bounce page
pool instead of opt out. Make fscrypt_alloc_bounce_page() check that
the bounce page pool has been initialized.
I believe the opt-in makes more sense, since nothing else in
fscrypt_operations is opt-out, and these days filesystems can choose to
use blk-crypto which doesn't need the fscrypt bounce page pool. Also, I
happen to be planning to add two more flags, and I wanted to fix the
"FS_CFLG_" name anyway as it wasn't prefixed with "FSCRYPT_".
Link: https://lore.kernel.org/r/20230925055451.59499-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_operations::key_prefix should not be set by any filesystems that
aren't setting it already. This is already documented, but apparently
it's not sufficiently clear, as both ceph and btrfs have tried to set
it. Rename the field to legacy_key_prefix and improve the documentation
to hopefully make it clearer.
Link: https://lore.kernel.org/r/20230925055451.59499-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
This reverts commit 0269b58586.
Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.
Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
=DopS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Len Brown has reported that system suspend sometimes fail due to
inability to freeze a task working in ext4_trim_fs() for one minute.
Trimming a large filesystem on a disk that slowly processes discard
requests can indeed take a long time. Since discard is just an advisory
call, it is perfectly fine to interrupt it at any time and the return
number of discarded blocks until that moment. Do that when we detect the
task is being frozen.
Cc: stable@kernel.org
Reported-by: Len Brown <lenb@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=216322
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we set the group's trimmed bit in ext4_trim_all_free() based
on return value of ext4_try_to_trim_range(). However when we will want
to abort trimming because of suspend attempt, we want to return success
from ext4_try_to_trim_range() but not set the trimmed bit. Instead
implementing awkward propagation of this information, just move setting
of trimmed bit into ext4_try_to_trim_range() when the whole group is
trimmed.
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Cleanups in the ext4 remount code when going to and from read-only
* Cleanups in ext4's multiblock allocator
* Cleanups in the jbd2 setup/mounting code paths
* Performance improvements when appending to a delayed allocation file
* Miscenallenous syzbot and other bug fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmTwqUMACgkQ8vlZVpUN
gaMqgwf6Aui6MlrtNJx6CrJt4dxLANQ8G6bsJ2Zr+6QNS1X/GAUrCCyLWWom1dfb
OJ/n4/JUCNc9v5yLCTqHOE5ZFTdQItOBJUKXbJYff8EdnR+zCUULpj6bPbEs5BKp
U7CiiZ9TIi9S2TWezvIJKIa2VxgPej7CH/HOt8ISh/Msq8nHvcEEJIyOEvVk9odQ
LEkiQCsikWaljB7qEOIYo+xgFffMZfttc4zuTkdr/h1I6OWhvQYmlwSnTuAiE7BS
BVf3ebD2Dg8TChUMXOsk2d743iZNWf/+yTfbXVu93/uEM9vgF0+HO6EerTK8RMeM
yxhshg9z7ccuFjdY/2NYDXe6pEuDKw==
=cMIX
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many ext4 and jbd2 cleanups and bug fixes:
- Cleanups in the ext4 remount code when going to and from read-only
- Cleanups in ext4's multiblock allocator
- Cleanups in the jbd2 setup/mounting code paths
- Performance improvements when appending to a delayed allocation file
- Miscellaneous syzbot and other bug fixes"
* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
ext4: fix slab-use-after-free in ext4_es_insert_extent()
libfs: remove redundant checks of s_encoding
ext4: remove redundant checks of s_encoding
ext4: reject casefold inode flag without casefold feature
ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
ext4: do not mark inode dirty every time when appending using delalloc
ext4: rename s_error_work to s_sb_upd_work
ext4: add periodic superblock update check
ext4: drop dio overwrite only flag and associated warning
ext4: add correct group descriptors and reserved GDT blocks to system zone
ext4: remove unused function declaration
ext4: mballoc: avoid garbage value from err
ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
ext4: change the type of blocksize in ext4_mb_init_cache()
ext4: fix unttached inode after power cut with orphan file feature enabled
jbd2: correct the end of the journal recovery scan range
ext4: ext4_get_{dev}_journal return proper error value
ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
jbd2: jbd2_journal_init_{dev,inode} return proper error return value
jbd2: drop useless error tag in jbd2_journal_wipe()
...
-----BEGIN PGP SIGNATURE-----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=p1bd
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpbgAKCRCRxhvAZXjc
oi8PAQCtXelGZHmTcmevsO8p4Qz7hFpkonZ/TnxKf+RdnlNgPgD+NWi+LoRBpaAj
xk4z8SqJaTTP4WXrG5JZ6o7EQkUL8gE=
=2e9I
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
Yikebaer reported an issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0
fs/ext4/extents_status.c:894
Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438
CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 #1
Call Trace:
[...]
kasan_report+0xba/0xf0 mm/kasan/report.c:588
ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Allocated by task 8438:
[...]
kmem_cache_zalloc include/linux/slab.h:693 [inline]
__es_alloc_extent fs/ext4/extents_status.c:469 [inline]
ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
Freed by task 8438:
[...]
kmem_cache_free+0xec/0x490 mm/slub.c:3823
ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline]
__es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802
ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882
ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
ext4_zero_range fs/ext4/extents.c:4622 [inline]
ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
[...]
==================================================================
The flow of issue triggering is as follows:
1. remove es
raw es es removed es1
|-------------------| -> |----|.......|------|
2. insert es
es insert es1 merge with es es1 merge with es and free es1
|----|.......|------| -> |------------|------| -> |-------------------|
es merges with newes, then merges with es1, frees es1, then determines
if es1->es_len is 0 and triggers a UAF.
The code flow is as follows:
ext4_es_insert_extent
es1 = __es_alloc_extent(true);
es2 = __es_alloc_extent(true);
__es_remove_extent(inode, lblk, end, NULL, es1)
__es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree
__es_insert_extent(inode, &newes, es2)
ext4_es_try_to_merge_right
ext4_es_free_extent(inode, es1) ---> es1 is freed
if (es1 && !es1->es_len)
// Trigger UAF by determining if es1 is used.
We determine whether es1 or es2 is used immediately after calling
__es_remove_extent() or __es_insert_extent() to avoid triggering a
UAF if es1 or es2 is freed.
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com
Fixes: 2a69c45008 ("ext4: using nofail preallocation in ext4_es_insert_extent()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230815070808.3377171-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4 does not allow inodes with the casefold flag to be
instantiated when unsupported, it's unnecessary to repeatedly check for
support later on during random filesystem operations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-3-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It is invalid for the casefold inode flag to be set without the casefold
superblock feature flag also being set. e2fsck already considers this
case to be invalid and handles it by offering to clear the casefold flag
on the inode. __ext4_iget() also already considered this to be invalid,
sort of, but it only got so far as logging an error message; it didn't
actually reject the inode. Make it reject the inode so that other code
doesn't have to handle this case. This matches what f2fs does.
Note: we could check 's_encoding != NULL' instead of
ext4_has_feature_casefold(). This would make the check robust against
the casefold feature being enabled by userspace writing to the page
cache of the mounted block device. However, it's unsolvable in general
for filesystems to be robust against concurrent writes to the page cache
of the mounted block device. Though this very particular scenario
involving the casefold feature is solvable, we should not pretend that
we can support this model, so let's just check the casefold feature.
tune2fs already forbids enabling casefold on a mounted filesystem.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the delalloc append write scenario, if inode's i_size is extended due
to buffer write, there are delalloc writes pending in the range up to
i_size, and no need to touch i_disksize since writeback will push
i_disksize up to i_size eventually. Offers significant performance
improvement in high-frequency append write scenarios.
I conducted tests in my 32-core environment by launching 32 concurrent
threads to append write to the same file. Each write operation had a
length of 1024 bytes and was repeated 100000 times. Without using this
patch, the test was completed in 7705 ms. However, with this patch, the
test was completed in 5066 ms, resulting in a performance improvement of
34%.
Moreover, in test scenarios of Kafka version 2.6.2, using packet size of
2K, with this patch resulted in a 10% performance improvement.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The most common use that s_error_work will get scheduled is now the
periodic update of the superblock. So rename it to s_sb_upd_work.
Also rename the function flush_stashed_error_work() to
update_super_work().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch introduces a mechanism to periodically check and update
the superblock within the ext4 file system. The main purpose of this
patch is to keep the disk superblock up to date. The update will be
performed if more than one hour has passed since the last update, and
if more than 16MB of data have been written to disk.
This check and update is performed within the ext4_journal_commit_callback
function, ensuring that the superblock is written while the disk is
active, rather than based on a timer that may trigger during disk idle
periods.
Discussion https://www.spinics.net/lists/linux-ext4/msg85865.html
Signed-off-by: Vitaliy Kuznetsov <vk.en.mail@gmail.com>
Link: https://lore.kernel.org/r/20230810143852.40228-1-vk.en.mail@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The commit referenced below opened up concurrent unaligned dio under
shared locking for pure overwrites. In doing so, it enabled use of
the IOMAP_DIO_OVERWRITE_ONLY flag and added a warning on unexpected
-EAGAIN returns as an extra precaution, since ext4 does not retry
writes in such cases. The flag itself is advisory in this case since
ext4 checks for unaligned I/Os and uses appropriate locking up
front, rather than on a retry in response to -EAGAIN.
As it turns out, the warning check is susceptible to false positives
because there are scenarios where -EAGAIN can be expected from lower
layers without necessarily having IOCB_NOWAIT set on the iocb. For
example, one instance of the warning has been seen where io_uring
sets IOCB_HIPRI, which in turn results in REQ_POLLED|REQ_NOWAIT on
the bio. This results in -EAGAIN if the block layer is unable to
allocate a request, etc. [Note that there is an outstanding patch to
untangle REQ_POLLED and REQ_NOWAIT such that the latter relies on
IOCB_NOWAIT, which would also address this instance of the warning.]
Another instance of the warning has been reproduced by syzbot. A dio
write is interrupted down in __get_user_pages_locked() waiting on
the mm lock and returns -EAGAIN up the stack. If the iomap dio
iteration layer has made no progress on the write to this point,
-EAGAIN returns up to the filesystem and triggers the warning.
This use of the overwrite flag in ext4 is precautionary and
half-baked. I.e., ext4 doesn't actually implement overwrite checking
in the iomap callbacks when the flag is set, so the only extra
verification it provides are i_size checks in the generic iomap dio
layer. Combined with the tendency for false positives, the added
verification is not worth the extra trouble. Remove the flag,
associated warning, and update the comments to document when
concurrent unaligned dio writes are allowed and why said flag is not
used.
Cc: stable@kernel.org
Reported-by: syzbot+5050ad0fb47527b1808a@syzkaller.appspotmail.com
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Fixes: 310ee0902b ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810165559.946222-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
clang's static analysis warning: fs/ext4/mballoc.c
line 4178, column 6, Branch condition evaluates to a garbage value.
err is uninitialized and will be judged when 'len <= 0' or
it first enters the loop while the condition "!ext4_sb_block_valid()"
is true. Although this can't make problems now, it's better to
correct it.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230725043310.1227621-1-suhui@nfschina.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230707105516.9156-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
Unattached zero-length inode 39405. Clear? no
Unattached inode 39405
Connect to /lost+found? no
Above inconsistence is caused by following process:
P1 P2
ext4_create
inode = ext4_new_inode_start_handle // itable records nlink=1
ext4_add_nondir
err = ext4_add_entry // ENOSPC
ext4_append
ext4_bread
ext4_getblk
ext4_map_blocks // returns ENOSPC
drop_nlink(inode) // won't be updated into disk inode
ext4_orphan_add(handle, inode)
ext4_orphan_file_add
ext4_journal_stop(handle)
jbd2_journal_commit_transaction // commit success
>> power cut <<
ext4_fill_super
ext4_load_and_init_journal // itable records nlink=1
ext4_orphan_cleanup
ext4_process_orphan
if (inode->i_nlink) // true, inode won't be deleted
Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.
The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the unnecessary encoding of page order into an enum and pass the
page order directly. That lets us get rid of pe_order().
The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.
If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.
[willy@infradead.org: use "order %u" to match the (non dev_t) style]
Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Factor out a new helper form ext4_get_dev_journal() to get external
journal bdev and check validation of this device, drop ext4_blkdev_get()
helper, and also remove duplicate check of journal feature. It makes
ext4_get_dev_journal() more clear than before.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-12-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.
This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache. The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.
The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.
The second patch is the actual fix. Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set. folio_needs_release() is altered to
add a check for this.
This patch (of 2):
Make filemap_release_folio() check folio_has_private(). Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.
There are a couple of sites in mm/vscan.c that this can't so easily be
done. In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.
In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.
A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory. This will acquire
additional parts to the condition in a future patch.
After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.
Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
block_commit_write() always returns 0, this patch changes it to return
void.
Link: https://lkml.kernel.org/r/20230626055518.842392-3-beanhuo@iokpp.de
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Luís Henriques <ocfs2-devel@oss.oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.
For ext4, we only need to enable the FS_MGTIME flag.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-12-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Check for sb->s_type which is the right place to look at the file system
type, not the holder, which is just an implementation detail in the VFS
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the external journal device
into ->kill_sb to archive that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
generic_fillattr just fills in the entire stat struct indiscriminately
today, copying data from the inode. There is at least one attribute
(STATX_CHANGE_COOKIE) that can have side effects when it is reported,
and we're looking at adding more with the addition of multigrain
timestamps.
Add a request_mask argument to generic_fillattr and have most callers
just pass in the value that is passed to getattr. Have other callers
(e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of
STATX_CHANGE_COOKIE into generic_fillattr.
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
bdev->bd_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230807112625.652089-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
__ext4_journal_get_write_access already has a super_block available,
and there is no need to go from that to the bdev to go back to the
owning super_block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Using CR_BEST_AVAIL_LEN only make sense for regular files, as for
non-regular files we never normalize the allocation request length i.e.
goal len is same as original length (ac_g_ex.fe_len == ac_o_ex.fe_len).
Hence there is no scope of trimming the goal length to make it
satisfy original request len. Thus this patch avoids using
CR_BEST_AVAIL_LEN criteria for non-regular files request.
Cc: stable@kernel.org
Fixes: 33122aa930f1 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/2a694c748ff8b8c4b416995a24f06f07b55047a8.1689516047.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions.
Cc: stable@kernel.org
Fixes: 1ae98e295f ("ext4: optimize match for casefolded encrypted dirs")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230803091713.13239-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We named criteria with CR_XXX, correct stale comment to criteria with
raw number.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove futher check if good
group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove ext4_set_bit_atomic and ext4_clear_bit_atomic which are defined but not
used.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-8-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace the traditional ternary conditional operator with with max()/min()
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return at end of void function is unnecessary, just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return good group when it's found in loop to remove unnecessary NULL
initialization of grp and futher check if good group is found after loop.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.
Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace CR_FAST with ext4_mb_cr_expensive() inline function for better
readability. This function returns true if the criteria is one of the
expensive/slower ones where lots of disk IO/prefetching is acceptable.
No functional changes are intended in this patch.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230630085927.140137-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
