For read cache missing, bcache defines a readahead size for the read I/O
request to the backing device for the missing data. This readahead size
is initialized to 0, and almost no one uses it to avoid unnecessary read
amplifying onto backing device and write amplifying onto cache device.
Considering upper layer file system code has readahead logic allready
and works fine with readahead_cache_policy sysfile interface, we don't
have to keep bcache self-defined readahead anymore.
This patch removes the bcache self-defined readahead for cache missing
request for backing device, and the readahead sysfs file interfaces are
removed as well.
This is the preparation for next patch to fix potential kernel panic due
to oversized request in a simpler method.
Reported-by: Alexander Ullrich <ealex1979@gmail.com>
Reported-by: Diego Ercolani <diego.ercolani@gmail.com>
Reported-by: Jan Szubiak <jan.szubiak@linuxpolska.pl>
Reported-by: Marco Rebhan <me@dblsaiko.net>
Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Reported-by: Victor Westerhuis <victor@westerhu.is>
Reported-by: Vojtech Pavlik <vojtech@suse.cz>
Reported-and-tested-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reported-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20210607125052.21277-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the original bdev is stored in the bio this assert is incorrect
and will trigger for any partitioned raid5 device.
Reported-by: Florian Dazinger <spam02@dazinger.net>
Tested-by: Florian Dazinger <spam02@dazinger.net>
Cc: stable@vger.kernel.org # 5.12
Fixes: 309dca309f ("block: store a block_device pointer in struct bio"),
Reviewed-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).
Fixes: eeba6809d8 ("md/raid1: end bio when the device faulty")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Song Liu <song@kernel.org>
NULL pointer dereference was observed in super_written() when it tries
to access the mddev structure.
[The below stack trace is from an older kernel, but the problem described
in this patch applies to the mainline kernel.]
[ 1194.474861] task: ffff8fdd20858000 task.stack: ffffb99d40790000
[ 1194.488000] RIP: 0010:super_written+0x29/0xe1
[ 1194.499688] RSP: 0018:ffff8ffb7fcc3c78 EFLAGS: 00010046
[ 1194.512477] RAX: 0000000000000000 RBX: ffff8ffb7bf4a000 RCX: ffff8ffb78991048
[ 1194.527325] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ffb56b8a200
[ 1194.542576] RBP: ffff8ffb7fcc3c90 R08: 000000000000000b R09: 0000000000000000
[ 1194.558001] R10: ffff8ffb56b8a298 R11: 0000000000000000 R12: ffff8ffb56b8a200
[ 1194.573070] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1194.588117] FS: 0000000000000000(0000) GS:ffff8ffb7fcc0000(0000) knlGS:0000000000000000
[ 1194.604264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1194.617375] CR2: 00000000000002b8 CR3: 00000021e040a002 CR4: 00000000007606e0
[ 1194.632327] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1194.647865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1194.663316] PKRU: 55555554
[ 1194.674090] Call Trace:
[ 1194.683735] <IRQ>
[ 1194.692948] bio_endio+0xae/0x135
[ 1194.703580] blk_update_request+0xad/0x2fa
[ 1194.714990] blk_update_bidi_request+0x20/0x72
[ 1194.726578] __blk_end_bidi_request+0x2c/0x4d
[ 1194.738373] __blk_end_request_all+0x31/0x49
[ 1194.749344] blk_flush_complete_seq+0x377/0x383
[ 1194.761550] flush_end_io+0x1dd/0x2a7
[ 1194.772910] blk_finish_request+0x9f/0x13c
[ 1194.784544] scsi_end_request+0x180/0x25c
[ 1194.796149] scsi_io_completion+0xc8/0x610
[ 1194.807503] scsi_finish_command+0xdc/0x125
[ 1194.818897] scsi_softirq_done+0x81/0xde
[ 1194.830062] blk_done_softirq+0xa4/0xcc
[ 1194.841008] __do_softirq+0xd9/0x29f
[ 1194.851257] irq_exit+0xe6/0xeb
[ 1194.861290] do_IRQ+0x59/0xe3
[ 1194.871060] common_interrupt+0x1c6/0x382
[ 1194.881988] </IRQ>
[ 1194.890646] RIP: 0010:cpuidle_enter_state+0xdd/0x2a5
[ 1194.902532] RSP: 0018:ffffb99d40793e68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff43
[ 1194.917317] RAX: ffff8ffb7fce27c0 RBX: ffff8ffb7fced800 RCX: 000000000000001f
[ 1194.932056] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000
[ 1194.946428] RBP: ffffb99d40793ea0 R08: 0000000000000004 R09: 0000000000002ed2
[ 1194.960508] R10: 0000000000002664 R11: 0000000000000018 R12: 0000000000000003
[ 1194.974454] R13: 000000000000000b R14: ffffffff925715a0 R15: 0000011610120d5a
[ 1194.988607] ? cpuidle_enter_state+0xcc/0x2a5
[ 1194.999077] cpuidle_enter+0x17/0x19
[ 1195.008395] call_cpuidle+0x23/0x3a
[ 1195.017718] do_idle+0x172/0x1d5
[ 1195.026358] cpu_startup_entry+0x73/0x75
[ 1195.035769] start_secondary+0x1b9/0x20b
[ 1195.044894] secondary_startup_64+0xa5/0xa5
[ 1195.084921] RIP: super_written+0x29/0xe1 RSP: ffff8ffb7fcc3c78
[ 1195.096354] CR2: 00000000000002b8
bio in the above stack is a bitmap write whose completion is invoked after
the tear down sequence sets the mddev structure to NULL in rdev.
During tear down, there is an attempt to flush the bitmap writes, but for
external bitmaps, there is no explicit wait for all the bitmap writes to
complete. For instance, md_bitmap_flush() is called to flush the bitmap
writes, but the last call to md_bitmap_daemon_work() in md_bitmap_flush()
could generate new bitmap writes for which there is no explicit wait to
complete those writes. The call to md_bitmap_update_sb() will return
simply for external bitmaps and the follow-up call to md_update_sb() is
conditional and may not get called for external bitmaps. This results in a
kernel panic when the completion routine, super_written() is called which
tries to reference mddev in the rdev that has been set to
NULL(in unbind_rdev_from_array() by tear down sequence).
The solution is to call md_super_wait() for external bitmaps after the
last call to md_bitmap_daemon_work() in md_bitmap_flush() to ensure there
are no pending bitmap writes before proceeding with the tear down.
Cc: stable@vger.kernel.org
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Reviewed-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Instead of returning an existing mddev, just for it to be discarded
later directly return -EEXIST. Rename the function to mddev_alloc now
that it doesn't find an existing mddev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Allocate the new mddev first speculatively, which greatly simplifies
the code flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Split out a self contained helper to find a free minor for the md
"unit" number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
commit df7b59ba92 ("dm verity: fix FEC for RS roots unaligned to
block size") introduced the possibility for misaligned roots IO
relative to the underlying device's logical block size. E.g. Android's
default RS roots=2 results in dm_bufio->block_size=1024, which causes
the following EIO if the logical block size of the device is 4096,
given v->data_dev_block_bits=12:
E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size
E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5
Fix this by onlu using f->roots for dm_bufio blocksize IFF it is
aligned to v->data_dev_block_bits.
Fixes: df7b59ba92 ("dm verity: fix FEC for RS roots unaligned to block size")
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The patch "bcache: remove PTR_CACHE" introduces a compiling failure in
debug.c with following error message,
In file included from drivers/md/bcache/bcache.h:182:0,
from drivers/md/bcache/debug.c:9:
drivers/md/bcache/debug.c: In function 'bch_btree_verify':
drivers/md/bcache/debug.c:53:19: error: 'c' undeclared (first use in
this function)
bio_set_dev(bio, c->cache->bdev);
^
This patch fixes the regression by replacing c->cache->bdev by b->c->
cache->bdev.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210411134316.80274-8-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cast multiple variables to (int64_t) in order to give the compiler
complete information about the proper arithmetic to use. Notice that
these variables are being used in contexts that expect expressions of
type int64_t (64 bit, signed). And currently, such expressions are
being evaluated using 32-bit arithmetic.
Fixes: d0cf9503e9 ("octeontx2-pf: ethtool fec mode support")
Addresses-Coverity-ID: 1501724 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1501725 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1501726 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
building with 'make W=1' shows a harmless warning for each user of the
EBUG_ON() macro:
drivers/md/bcache/bset.c: In function 'bch_btree_sort_partial':
drivers/md/bcache/util.h:30:55: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
30 | #define EBUG_ON(cond) do { if (cond); } while (0)
| ^
drivers/md/bcache/bset.c:1312:9: note: in expansion of macro 'EBUG_ON'
1312 | EBUG_ON(oldsize >= 0 && bch_count_data(b) != oldsize);
| ^~~~~~~
Reword the macro slightly to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes the following sparse warnings:
drivers/md/bcache/features.c:22:16: warning: Using plain integer as NULL
pointer
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the PTR_CACHE inline and replace it with a direct dereference
of c->cache.
(Coly Li: fix the typo from PTR_BUCKET to PTR_CACHE in commit log)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bch_cached_dev_run(), free(env[1])|free(env[2])|free(buf)
show up three times. This patch introduce out tag in
which free(env[1])|free(env[2])|free(buf) are only called
one time. If we need to call free() when errors occur,
we can set error code to ret, and then goto out tag directly.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210411134316.80274-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Split mddev_find into a simple mddev_find that just finds an existing
mddev by the unit number, and a more complicated mddev_find that deals
with find or allocating a mddev.
This turns out to fix this bug reported by Zhao Heming.
----------------------------- snip ------------------------------
commit d3374825ce ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt
*** script ***
about trigger 1 time with 10 tests
`1 node1="15sp3-mdcluster1"
2 node2="15sp3-mdcluster2"
3
4 mdadm -Ss
5 ssh ${node2} "mdadm -Ss"
6 wipefs -a /dev/sda /dev/sdb
7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \
/dev/sdb --assume-clean
8
9 for i in {1..100}; do
10 echo ==== $i ====;
11
12 echo "test ...."
13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
14 sleep 1
15
16 echo "clean ....."
17 ssh ${node2} "mdadm -Ss"
18 done
`
I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.
*** stack ***
`ID: 2831 TASK: ffff8dd7223b5040 CPU: 0 COMMAND: "mdadm"
#0 [ffffa15d00a13b90] __schedule at ffffffffb8f1935f
#1 [ffffa15d00a13ba8] exact_lock at ffffffffb8a4a66d
#2 [ffffa15d00a13bb0] kobj_lookup at ffffffffb8c62fe3
#3 [ffffa15d00a13c28] __blkdev_get at ffffffffb89273b9
#4 [ffffa15d00a13c98] blkdev_get at ffffffffb8927964
#5 [ffffa15d00a13cb0] do_dentry_open at ffffffffb88dc4b4
#6 [ffffa15d00a13ce0] path_openat at ffffffffb88f0ccc
#7 [ffffa15d00a13db8] do_filp_open at ffffffffb88f32bb
#8 [ffffa15d00a13ee0] do_sys_open at ffffffffb88ddc7d
#9 [ffffa15d00a13f38] do_syscall_64 at ffffffffb86053cb ffffffffb900008c
or:
[ 884.226509] mddev_put+0x1c/0xe0 [md_mod]
[ 884.226515] md_open+0x3c/0xe0 [md_mod]
[ 884.226518] __blkdev_get+0x30d/0x710
[ 884.226520] ? bd_acquire+0xd0/0xd0
[ 884.226522] blkdev_get+0x14/0x30
[ 884.226524] do_dentry_open+0x204/0x3a0
[ 884.226531] path_openat+0x2fc/0x1520
[ 884.226534] ? seq_printf+0x4e/0x70
[ 884.226536] do_filp_open+0x9b/0x110
[ 884.226542] ? md_release+0x20/0x20 [md_mod]
[ 884.226543] ? seq_read+0x1d8/0x3e0
[ 884.226545] ? kmem_cache_alloc+0x18a/0x270
[ 884.226547] ? do_sys_open+0x1bd/0x260
[ 884.226548] do_sys_open+0x1bd/0x260
[ 884.226551] do_syscall_64+0x5b/0x1e0
[ 884.226554] entry_SYSCALL_64_after_hwframe+0x44/0xa9
`
*** rootcause ***
"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.
The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.
`<thread 1>: "mdadm -Ss"
md_release
mddev_put deletes mddev from all_mddevs
queue_work for mddev_delayed_delete
at this time, "/dev/md0" is still available for opening
<thread 2>: "mdadm --monitor ..."
md_open
+ mddev_find can't find mddev of /dev/md0, and create a new mddev and
| return.
+ trigger "if (mddev->gendisk != bdev->bd_disk)" and return
-ERESTARTSYS.
`
In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.
In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.
------------------------------ snip ------------------------------
Cc: stable@vger.kernel.org
Fixes: d3374825ce ("md: make devices disappear when they are no longer needed.")
Reported-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Factor out a self-contained helper to just lookup a mddev by the dev_t
"unit".
Cc: stable@vger.kernel.org
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
commit d3374825ce ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.
This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).
For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.
*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt
*** script ***
about trigger every time with below script
```
1 node1="mdcluster1"
2 node2="mdcluster2"
3
4 mdadm -Ss
5 ssh ${node2} "mdadm -Ss"
6 wipefs -a /dev/sda /dev/sdb
7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \
/dev/sdb --assume-clean
8
9 for i in {1..10}; do
10 echo ==== $i ====;
11
12 echo "test ...."
13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
14 sleep 1
15
16 echo "clean ....."
17 ssh ${node2} "mdadm -Ss"
18 done
```
I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.
*** stack ***
```
[ 884.226509] mddev_put+0x1c/0xe0 [md_mod]
[ 884.226515] md_open+0x3c/0xe0 [md_mod]
[ 884.226518] __blkdev_get+0x30d/0x710
[ 884.226520] ? bd_acquire+0xd0/0xd0
[ 884.226522] blkdev_get+0x14/0x30
[ 884.226524] do_dentry_open+0x204/0x3a0
[ 884.226531] path_openat+0x2fc/0x1520
[ 884.226534] ? seq_printf+0x4e/0x70
[ 884.226536] do_filp_open+0x9b/0x110
[ 884.226542] ? md_release+0x20/0x20 [md_mod]
[ 884.226543] ? seq_read+0x1d8/0x3e0
[ 884.226545] ? kmem_cache_alloc+0x18a/0x270
[ 884.226547] ? do_sys_open+0x1bd/0x260
[ 884.226548] do_sys_open+0x1bd/0x260
[ 884.226551] do_syscall_64+0x5b/0x1e0
[ 884.226554] entry_SYSCALL_64_after_hwframe+0x44/0xa9
```
*** rootcause ***
"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.
The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.
```
<thread 1>: "mdadm -Ss"
md_release
mddev_put deletes mddev from all_mddevs
queue_work for mddev_delayed_delete
at this time, "/dev/md0" is still available for opening
<thread 2>: "mdadm --monitor ..."
md_open
+ mddev_find can't find mddev of /dev/md0, and create a new mddev and
| return.
+ trigger "if (mddev->gendisk != bdev->bd_disk)" and return
-ERESTARTSYS.
```
In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.
In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reading /proc/mdstat with a read buffer size that would not
fit the unused status line in the first read will skip this
line from the output.
So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something
like: unused devices: <none>
Don't return NULL immediately in start() for v=2 but call
show() once to print the status line also for multiple reads.
Cc: stable@vger.kernel.org
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: Jan Glauber <jglauber@digitalocean.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
For far layout, the discard region is not continuous on disks. So it needs
far copies r10bio to cover all regions. It needs a way to know all r10bios
have finish or not. Similar with raid10_sync_request, only the first r10bio
master_bio records the discard bio. Other r10bios master_bio record the
first r10bio. The first r10bio can finish after other r10bios finish and
then return the discard bio.
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now the discard request is split by chunk size. So it takes a long time
to finish mkfs on disks which support discard function. This patch improve
handling raid10 discard request. It uses the similar way with patch
29efc390b (md/md0: optimize raid0 discard handling).
But it's a little complex than raid0. Because raid10 has different layout.
If raid10 is offset layout and the discard request is smaller than stripe
size. There are some holes when we submit discard bio to underlayer disks.
For example: five disks (disk1 - disk5)
D01 D02 D03 D04 D05
D05 D01 D02 D03 D04
D06 D07 D08 D09 D10
D10 D06 D07 D08 D09
The discard bio just wants to discard from D03 to D10. For disk3, there is
a hole between D03 and D08. For disk4, there is a hole between D04 and D09.
D03 is a chunk, raid10_write_request can handle one chunk perfectly. So
the part that is not aligned with stripe size is still handled by
raid10_write_request.
If reshape is running when discard bio comes and the discard bio spans the
reshape position, raid10_write_request is responsible to handle this
discard bio.
I did a test with this patch set.
Without patch:
time mkfs.xfs /dev/md0
real4m39.775s
user0m0.000s
sys0m0.298s
With patch:
time mkfs.xfs /dev/md0
real0m0.105s
user0m0.000s
sys0m0.007s
nvme3n1 259:1 0 477G 0 disk
└─nvme3n1p1 259:10 0 50G 0 part
nvme4n1 259:2 0 477G 0 disk
└─nvme4n1p1 259:11 0 50G 0 part
nvme5n1 259:6 0 477G 0 disk
└─nvme5n1p1 259:12 0 50G 0 part
nvme2n1 259:9 0 477G 0 disk
└─nvme2n1p1 259:15 0 50G 0 part
nvme0n1 259:13 0 477G 0 disk
└─nvme0n1p1 259:14 0 50G 0 part
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The following patch will reuse these logics, so pull the same codes into
one function.
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit
to all member disks and it needs to use r10bio. So extend to
r10bio->devs[geo.raid_disks].
Reviewed-by: Coly Li <colyli@suse.de>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Move these logic from raid0.c to md.c, so that we can also use it in
raid10.c.
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
When a DM device is first created it doesn't yet have an established
capacity, therefore the use of set_capacity_and_notify() should be
conditional given the potential for needless pr_info "detected
capacity change" noise even if capacity is 0.
One could argue that the pr_info() in set_capacity_and_notify() is
misplaced, but that position is not held uniformly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: f64d9b2eac ("dm: use set_capacity_and_notify")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 24f6b6036c ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.
The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.
As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.
To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.
Fixes: 24f6b6036c ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Three optional parameters must be accepted at once in a DM verity table, e.g.:
(verity_error_handling_mode) (ignore_zero_block) (check_at_most_once)
Fix this to be possible by incrementing DM_VERITY_OPTS_MAX.
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Fixes: 843f38d382 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qHyO
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-03-12-v2' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Mostly just random fixes all over the map.
The only odd-one-out change is finally getting the rename of
BIO_MAX_PAGES to BIO_MAX_VECS done. This should've been done with the
multipage bvec change, but it's been left.
Do it now to avoid hassles around changes piling up for the next merge
window.
Summary:
- NVMe pull request:
- one more quirk (Dmitry Monakhov)
- fix max_zone_append_sectors initialization (Chaitanya Kulkarni)
- nvme-fc reset/create race fix (James Smart)
- fix status code on aborts/resets (Hannes Reinecke)
- fix the CSS check for ZNS namespaces (Chaitanya Kulkarni)
- fix a use after free in a debug printk in nvme-rdma (Lv Yunlong)
- Follow-up NVMe error fix for NULL 'id' (Christoph)
- Fixup for the bd_size_lock being IRQ safe, now that the offending
driver has been dropped (Damien).
- rsxx probe failure error return (Jia-Ju)
- umem probe failure error return (Wei)
- s390/dasd unbind fixes (Stefan)
- blk-cgroup stats summing fix (Xunlei)
- zone reset handling fix (Damien)
- Rename BIO_MAX_PAGES to BIO_MAX_VECS (Christoph)
- Suppress uevent trigger for hidden devices (Daniel)
- Fix handling of discard on busy device (Jan)
- Fix stale cache issue with zone reset (Shin'ichiro)"
* tag 'block-5.12-2021-03-12-v2' of git://git.kernel.dk/linux-block:
nvme: fix the nsid value to print in nvme_validate_or_alloc_ns
block: Discard page cache of zone reset target range
block: Suppress uevent for hidden device when removed
block: rename BIO_MAX_PAGES to BIO_MAX_VECS
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a
nvme-rdma: Fix a use after free in nvmet_rdma_write_data_done
nvme-core: check ctrl css before setting up zns
nvme-fc: fix racing controller reset and create association
nvme-fc: return NVME_SC_HOST_ABORTED_CMD when a command has been aborted
nvme-fc: set NVME_REQ_CANCELLED in nvme_fc_terminate_exchange()
nvme: add NVME_REQ_CANCELLED flag in nvme_cancel_request()
nvme: simplify error logic in nvme_validate_ns()
nvme: set max_zone_append_sectors nvme_revalidate_zones
block: rsxx: fix error return code of rsxx_pci_probe()
block: Fix REQ_OP_ZONE_RESET_ALL handling
umem: fix error return code in mm_pci_probe()
blk-cgroup: Fix the recursive blkg rwstat
s390/dasd: fix hanging IO request during DASD driver unbind
s390/dasd: fix hanging DASD driver unbind
block: Try to handle busy underlying device on discard
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reed-Solomon roots that are unaligned to block size.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBCgmkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlF9B/481eKdOYK5RLj6LneVf10niUACEN0G
tp8CeKh2wEcTjX+9pWxvigAE7FZnvD0sCts3eRCd8egkdV3L9uHyaCHU9V8iGP8L
dSjHXjbwbOumww5FY1ddx2ZiRImcU7YpEj5TrUZi2TyoAB2jOblDgaUt8jWsbppa
8miPUZi0Kp56Z5EsFJcT8dYbIlLfUpD/XfZ0hjqMoc9XZOeoGvYqpYX1pZgIfj2s
F23Dru858zqjv7OLmIgjzSgS0dZSwdLMUpKInaW1AipvNQpWSuh2DQdP7Ail3+yy
gUirpBjztoYCfqwpQTJpGnnb47tECYUXef6dI7xR5bXnyaX8CG5bRvVV
=a00f
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
Optional Forward Error Correction (FEC) code in dm-verity uses
Reed-Solomon code and should support roots from 2 to 24.
The error correction parity bytes (of roots lengths per RS block) are
stored on a separate device in sequence without any padding.
Currently, to access FEC device, the dm-verity-fec code uses dm-bufio
client with block size set to verity data block (usually 4096 or 512
bytes).
Because this block size is not divisible by some (most!) of the roots
supported lengths, data repair cannot work for partially stored parity
bytes.
This fix changes FEC device dm-bufio block size to "roots << SECTOR_SHIFT"
where we can be sure that the full parity data is always available.
(There cannot be partial FEC blocks because parity must cover whole
sectors.)
Because the optional FEC starting offset could be unaligned to this
new block size, we have to use dm_bufio_set_sector_offset() to
configure it.
The problem is easily reproduced using veritysetup, e.g. for roots=13:
# create verity device with RS FEC
dd if=/dev/urandom of=data.img bs=4096 count=8 status=none
veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=13 | awk '/^Root hash/{ print $3 }' >roothash
# create an erasure that should be always repairable with this roots setting
dd if=/dev/zero of=data.img conv=notrunc bs=1 count=8 seek=4088 status=none
# try to read it through dm-verity
veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=13 $(cat roothash)
dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer
# wait for possible recursive recovery in kernel
udevadm settle
veritysetup close test
With this fix, errors are properly repaired.
device-mapper: verity-fec: 7:1: FEC 0: corrected 8 errors
...
Without it, FEC code usually ends on unrecoverable failure in RS decoder:
device-mapper: verity-fec: 7:1: FEC 0: failed to correct: -74
...
This problem is present in all kernels since the FEC code's
introduction (kernel 4.5).
It is thought that this problem is not visible in Android ecosystem
because it always uses a default RS roots=2.
Depends-on: a14e5ec66a ("dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Tested-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm_bufio_get_device_size returns the device size in blocks. Before
returning the value, we must subtract the nubmer of starting
sectors. The number of starting sectors may not be divisible by block
size.
Note that currently, no target is using dm_bufio_set_sector_offset and
dm_bufio_get_device_size simultaneously, so this change has no effect.
However, an upcoming dm-verity-fec fix needs this change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number
of in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmAqxggTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjVOCACkZKleQhsCEYHNtjZ40Du+4PPBvESA
O+ScdUCeik4YUXvQtlFRPcYxxOH0zL0CUivLnNlsKzGTTgulw5azgFNuUTzIhH5y
a86Q+DReigPegzVCCOenInU18pYa03rLtYOAb6SK49IqVeMWMFSJVBv73HWS7OFV
slMlsQCN46YgbviYsGUXk5+uKMET4ijJZVW+8zSYg0GsWLHdgQtBkEoojO1n9H2B
jio2Nvhto0bJ4dV482lmd3G+LABmaBbLs0Xx/a7iHVigkIYZz4BHwDYNz/EQnNEi
dYlOrSL9a6ur+DFR6vxShzG40LbK7KVr8jHiXyKv2WZA7FMK0l4fyEFV
=E+n3
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM integrity's HMAC support to provide enhanced security of
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number of
in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
dm: fix deadlock when swapping to encrypted device
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
dm: support key eviction from keyslot managers of underlying devices
dm: add support for passing through inline crypto support
block/keyslot-manager: Introduce functions for device mapper support
block/keyslot-manager: Introduce passthrough keyslot manager
dm era: only resize metadata in preresume
dm era: Use correct value size in equality function of writeset tree
dm era: Fix bitset memory leaks
dm era: Verify the data block size hasn't changed
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: Update in-core bitset after committing the metadata
dm era: Recover committed writeset after crash
dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
dm writecache: fix writing beyond end of underlying device when shrinking
dm table: remove needless request_queue NULL pointer checks
dm table: fix zoned iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix iterate_devices based device capability checks
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAtnZ8QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpoOhD/9TZJN6mgvlmO2zuNlZwko0jD+HUYNRHdfa
UiZhKs55ShlT/Wd8MMLcmMU2/+iztq4c/ZLK9eS7NHgKTu3GbgsICEZK+XLSTVJh
gCwwEnY2dnBAIwBWxLeDG04DQvcwnOhVN1OSmhFbXG3dpElXSyfEjx00niGtl0tE
5YtvmStpqkC0tHlxq8CMyyfaL1ODGmBK2uhDeQCO12SXIgKondJUaI3/H1l1dC5t
+yg4PsSLqezo0oWmqdTEE7lcEJs4GK1ZOhIBLtWe6tl/zaVD6DuzJL83pChm8vF+
qV4LCpJL0wUL7IG601AemFcUmEg34oC0FD6GYYhXxVOrlk43V6AfkycZ2rljNRop
/+Ff+CmXfWPAwSfJi/vDlveCvgyAJNMpv4/GwynUM1563v3TYy0YjT6Jlz6M3TUn
pS0MW7iUHj3t36U3JvcYnITqTPSfTMtYMOsWDx+V4+E9iGsQF1d7KZlCPMvjWAI2
c3QuWjitXd10BZ2qUvSzAg6piv1taBKJxg1PsGlu707mHZp5J6VPAkYQn4rFgjua
uCBbmRQCDF/wJ02IBmBUiMPP64UGbkhr+O3MILPqki967BdDDrLzjTs4e5zbMeu/
qB9XRr1Yd95GCyS8I42OCC906NXrJ2R2E8dtV1XoASWGusL/wFZrLd1th8Uq8ibb
Os+G4t1Qug==
=vx6U
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-linear and dm-flakey obviously can pass through inline crypto support.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that device mapper supports inline encryption, add the ability to
evict keys from all underlying devices. When an upper layer requests
a key eviction, we simply iterate through all underlying devices
and evict that key from each device.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
This could lead to errors, like:
device-mapper: era: metadata_digest_transcribe_writeset: dm_array_set_value failed
device-mapper: era: process_old_eras: digest step failed, stopping digestion
The reason of the above error is that the worker started the digestion
of the archived writeset using the old, larger size.
As a result, metadata_digest_transcribe_writeset tried to write beyond
the end of the era array.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix the writeset tree equality test function to use the right value size
when comparing two btree values.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Deallocate the memory allocated for the in-core bitsets when destroying
the target and in error paths.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
