Dave has not been very active on arch/sparc for the past two years.
I have been contributing to the SPARC32 port as well as maintaining
out-of-tree SPARC32 patches for LEON3/4/5 (SPARCv8 with CAS support)
since 2012. I am willing to step up as an arch/sparc (co-)maintainer.
For recent discussions on the matter, see [1] and [2].
[1] https://lore.kernel.org/r/20230713075235.2164609-1-u.kleine-koenig@pengutronix.de
[2] https://lore.kernel.org/r/20231209105816.GA1085691@ravnborg.org/
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c827683d ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d31306 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
Fixes: 20c827683d ("drm: bridge: samsung-dsim: Fix init during host transfer")
Fixes: 0c14d31306 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
Change the timer layout in the dtb to fit the format that needed by
the SBI.
Fixes: 967a94a92a ("riscv: dts: add initial Sophgo SG2042 SoC device tree")
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes: 730320fd77 ("MIPS: lantiq: enable all hardware interrupts on second VPE")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.
This works around booting failure on 3A1000+ since commit 61167ad5fe
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
"cpu_probe" is called both by BP and APs, but reserving exception vector
(like 0x0-0x1000) called by "cpu_probe" need once and calling on APs is
too late since memblock is unavailable at that time.
So, reserve exception vector ONLY by BP.
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Most of the symbols for which we do not have a prototype can actually be
made static and for the few that cannot, there is already a declaration
in a header for it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The stubs for kvm_own/lsx()/kvm_own_lasx() when CONFIG_CPU_HAS_LSX or
CONFIG_CPU_HAS_LASX is not defined should have a return value since they
return an int, so add "return -EINVAL;" to the stubs.
Fixes the build error:
In file included from ../arch/loongarch/include/asm/kvm_csr.h:12,
from ../arch/loongarch/kvm/interrupt.c:8:
../arch/loongarch/include/asm/kvm_vcpu.h: In function 'kvm_own_lasx':
../arch/loongarch/include/asm/kvm_vcpu.h:73:39: error: no return statement in function returning non-void [-Werror=return-type]
73 | static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { }
Fixes: db1ecca22e ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd89 ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 8569992d64 ("KVM: Use gfn instead of hva for
mmu_notifier_retry") replaces mmu_invalidate_retry_hva() usage with
mmu_invalidate_retry_gfn() for X86, LoongArch also need similar changes
to fix build.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Machines which have more than 8 nodes fail to boot SMP after commit
a2ccf46333 ("LoongArch/smp: Call rcutree_report_cpu_starting()
earlier"). Because such machines use tlb-based per-cpu base address
rather than dmw-based per-cpu base address, resulting per-cpu variables
can only be accessed after tlb_init(). But rcutree_report_cpu_starting()
is now called before tlb_init() and accesses per-cpu variables indeed.
Since the original patch want to avoid the lockdep warning caused by
page allocation in tlb_init(), we can move rcutree_report_cpu_starting()
to tlb_init() where after tlb exception configuration but before page
allocation.
Fixes: a2ccf46333 ("LoongArch/smp: Call rcutree_report_cpu_starting() earlier")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZbLbpwAKCRC93/aFa7yZ
2D2cAQCbpuo2Yuxo+LyfB7+k8NzcnNRIJTRsTfsiGVk/wx4hNQEA0DIq1Ellldpx
yMfwQzbZPoY/KacrVySTSWDTs0BNBAE=
=V5bS
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.8-2024-01-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-01-25:
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240125221503.5019-1-alexander.deucher@amd.com
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZbIZgQAKCRC4FpNVCsYG
v280AP90WBOaNCF5f07YQQZzdO9s442BKnMs0gYrNY8Ca/Z/GwD9FiMcyvXtGf9x
ovhdreJvXaK2zv9nUtcK5qJ4MVr+awI=
=bAQt
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-01-25' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbIb7l0EhpVp5cXE@fedora
Add a new helper, bch2_hash_lookup_in_snapshot(), for when we're not
operating in a subvolume and already have a snapshot ID, and then use it
in lookup_lostfound() -> __lookup_dirent().
This is a bugfix - lookup_lostfound() doesn't take a subvolume ID, we
were passing a nonsense subvolume ID before, and don't have one to pass
since we may be operating in an interior snapshot node that doesn't have
a subvolume ID.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Fixes: ae7d2346dc ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"
[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For debugging IPS-related issues, expose a new debug mask
that allows to disable IPS.
Usage:
amdgpu.dcdebugmask=0x800
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.
[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.
[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce a new Replay mode for DMUB version 0.0.199.0
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This allows kernel mapped pages like the PDB and PTB to be
read via the iomem debugfs when there is no vram in the system.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch
the limit from firmware instead of using cached values.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
amdgpu_reg_state_sysfs_fini could be invoked at the
time when asic_func is even not initialized, i.e.,
amdgpu_discovery_init fails for some reason.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Ony if vram vendor info is available, show in sysfs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
update the power cap setting for smu_v13.0.0/smu_v13.0.7
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For GFX 9.4.3 APUs, the current method of fetching vram vendor
information is not reliable. Avoid fetching the information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update smu v13.0.6 message to allow guest driver set gfx clock.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding
a NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4 Kbytes
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmWyUSISHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkiuIP/0IChNqw3KtJJQOb4eIu12qRTblMmucU
Yf+Q4ZBHI7Epz3HFWrmqoj7N7CaWAj+U8b9JEHbcZxP7cwo4mc7ScXmm78IOvpEl
ypWdjWVW89UVz6GI/Yz/MNC2H7By51NUkiDpbbAA4pZVK6N1+rO8oAU9Fy2IiFTb
ixt61S1zsVYdmUjHOD/PiU9b8i5cRBukaXF8jnznRj8nAT/cU9XUV/YyFixj33vQ
Rbs3HoKxD9Mk9KdJ7jgEMi7Vazb40w5TmfMLWyNglJQdNz4DUg+9tqQGCkEf5UGU
CpRKu4RVr2uzAn9N5Hav4O0He2kDUVH1MoPqgS6MnJAERzCDKoDFxo8ljTmHBk6b
ISmstRzRon/AXcp+94pwU5RT78B7HekXYlZPcj5tGVKiM7HMdgLiodOcZcsG5fdW
8okeYhpCL5ew/fxGOZnbNS/BiODZBaa+/e6ns8NasmWZHgGJa9uHiO865g5I53/H
jWnm53Bi1Zmkgu/+NwXEx1I1vWSa9GCBA8ia5oSuEQDWhHhm3EcUcr44kjrD/R+S
6elNScjrJ2kMF+fvOb1BEITUf77fk7/ATJarCk8oybJCAt7do+DZ1E47NN0M9Km8
gARKvThije9rmc4OZ7RYR7R9iQgvwpb7fgGJZw+SI3XFK/WxmcDJHV4dXLiA6+Mu
vvt+x7EmWiWf
=ER+y
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
-----BEGIN PGP SIGNATURE-----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=Xo8t
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fix from Amir Goldstein:
"Change the on-disk format for the new "xwhiteouts" feature introduced
in v6.7
The change reduces unneeded overhead of an extra getxattr per readdir.
The only user of the "xwhiteout" feature is the external composefs
tool, which has been updated to support the new on-disk format.
This change is also designated for 6.7.y"
* tag 'ovl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: mark xwhiteouts directory with overlay.opaque='x'
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZbFEvgAKCRCRxhvAZXjc
oiv6AP44QuZZP0qp+7YQrIn4jcpRcMowOjGsa9n9c5TYQna+ggEA+JLencaRkihi
NjsT0McUPKzfi58pKW+6a8AOudwNrgc=
=zpMk
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs fixes from Christian Brauner:
"This contains various fixes for the netfs work merged earlier this
cycle:
afs:
- Fix locking imbalance in afs_proc_addr_prefs_show()
- Remove afs_dynroot_d_revalidate() which is redundant
- Fix error handling during lookup
- Hide sillyrenames from userspace. This fixes a race between
silly-rename files being created/removed and userspace iterating
over directory entries
- Don't use unnecessary folio_*() functions
cifs:
- Don't use unnecessary folio_*() functions
cachefiles:
- erofs: Fix Null dereference when cachefiles are not doing
ondemand-mode
- Update mailing list
netfs library:
- Add Jeff Layton as reviewer
- Update mailing list
- Fix a error checking in netfs_perform_write()
- fscache: Check error before dereferencing
- Don't use unnecessary folio_*() functions"
* tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix missing/incorrect unlocking of RCU read lock
afs: Remove afs_dynroot_d_revalidate() as it is redundant
afs: Fix error handling with lookup via FS.InlineBulkStatus
afs: Hide silly-rename files from userspace
cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode
netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write()
netfs, fscache: Prevent Oops in fscache_put_cache()
cifs: Don't use certain unnecessary folio_*() functions
afs: Don't use certain unnecessary folio_*() functions
netfs: Don't use certain unnecessary folio_*() functions
netfs: Add Jeff Layton as reviewer
netfs, cachefiles: Change mailing list
This commit fixes RCU grace period stalls, which are observed when
an outgoing CPU's quiescent state reporting results in wakeup of
one of the grace period kthreads, to complete the grace period. If
those kthreads have SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU. Earlier migration
of the hrtimers from the CPU introduced in commit 5c0930ccaa
("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
results in this timer getting ignored. If the RCU grace period
kthreads are waiting for RT bandwidth to be available, they may
never be actually scheduled, resulting in RCU stall warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZbFOUgAKCRAAHS7/6Z0w
pQjcAQCg/tJYRjwGUPebKLUgkmXlR+IIANzEgvES/RgWTOld5gEAklZVTjf3J0qt
QeU9WC3My2cVPKvv6kqnuQ9rrqMQ3g0=
=U5an
-----END PGP SIGNATURE-----
Merge tag 'urgent-rcu.2024.01.24a' of https://github.com/neeraju/linux
Pull RCU fix from Neeraj Upadhyay:
"This fixes RCU grace period stalls, which are observed when an
outgoing CPU's quiescent state reporting results in wakeup of one of
the grace period kthreads, to complete the grace period.
If those kthreads have SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU.
Earlier migration of the hrtimers from the CPU introduced in commit
5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU
earlier") results in this timer getting ignored.
If the RCU grace period kthreads are waiting for RT bandwidth to be
available, they may never be actually scheduled, resulting in RCU
stall warnings"
* tag 'urgent-rcu.2024.01.24a' of https://github.com/neeraju/linux:
rcu: Defer RCU kthreads wakeup when CPU is dying
1. Google GS101: Correct the input clock names to CMU MISC clock
controller to match received review. The review was initially missed
and CMU MISC clock controller bindings, driver and DTS was merged
into v6.8-rc1 with different names. Nothing was released so far, so
the bindings and driver can be still corrected to match review.
2. Samsung Galaxy Tab3: Fix display by using correct vclk polarity in
display node.
-----BEGIN PGP SIGNATURE-----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=EaTi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+1/w
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v6.8
1. Google GS101: Correct the input clock names to CMU MISC clock
controller to match received review. The review was initially missed
and CMU MISC clock controller bindings, driver and DTS was merged
into v6.8-rc1 with different names. Nothing was released so far, so
the bindings and driver can be still corrected to match review.
2. Samsung Galaxy Tab3: Fix display by using correct vclk polarity in
display node.
* tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
Link: https://lore.kernel.org/r/20240125082400.163935-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.
-----BEGIN PGP SIGNATURE-----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=K7Rw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IR2+
-----END PGP SIGNATURE-----
Merge tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.8
Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.
* tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Handle partitions setup failures
firmware: arm_ffa: Use xa_insert() and check for result
firmware: arm_ffa: Simplify ffa_partitions_cleanup()
firmware: arm_ffa: Check xa_load() return value
firmware: arm_ffa: Add missing rwlock_init() for the driver partition
firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
Link: https://lore.kernel.org/r/20240122161652.3551159-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few fixes addressing the below issues:
1. A spurious IRQ related to the late reply can get wrongly associated
with the new enqueued request resulting in misinterpretation of data
in shared memory. This race-condition can be detected by looking at
the channel status bits which the platform must set to the channel
free before triggering the completion IRQ. Adding a consistency check
to validate such condition will fix the issue.
2. Incorrect use of asm-generic/bug.h instead of generic linux/bUg.h
3. xa_store() can't check for possible duplication insertion, use
xa_insert() instead
4. Fix the SCMI clock protocol version in the v3.2 SCMI specification
5. Incorrect upgrade of highest supported clock protocol version from
v2.0 to v3.0
-----BEGIN PGP SIGNATURE-----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=TZaY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aJcM
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.8
Few fixes addressing the below issues:
1. A spurious IRQ related to the late reply can get wrongly associated
with the new enqueued request resulting in misinterpretation of data
in shared memory. This race-condition can be detected by looking at
the channel status bits which the platform must set to the channel
free before triggering the completion IRQ. Adding a consistency check
to validate such condition will fix the issue.
2. Incorrect use of asm-generic/bug.h instead of generic linux/bUg.h
3. xa_store() can't check for possible duplication insertion, use
xa_insert() instead
4. Fix the SCMI clock protocol version in the v3.2 SCMI specification
5. Incorrect upgrade of highest supported clock protocol version from
v2.0 to v3.0
* tag 'scmi-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix the clock protocol supported version
firmware: arm_scmi: Fix the clock protocol version for v3.2
firmware: arm_scmi: Use xa_insert() when saving raw queues
firmware: arm_scmi: Use xa_insert() to store opps
firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
firmware: arm_scmi: Check mailbox/SMT channel for consistency
Link: https://lore.kernel.org/r/20240122161640.3551085-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 26c9d152eb ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for arm64
devicetrees:
The compatible property needs to contain the chip's name in addition to
the generic "tcg,tpm_tis-spi" and the nodename needs to be "tpm@0"
rather than "cr50@0":
tpm@1: compatible: ['tcg,tpm_tis-spi'] is too short
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
cr50@0: $nodename:0: 'cr50@0' does not match '^tpm(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
Fix these schema violations.
phyGATE-Tauri uses an Infineon SLB9670:
https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@phytec.de/
Gateworks Venice uses an Atmel ATTPM20P:
https://trac.gateworks.com/wiki/tpm
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an
ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was
observed that was immediately preceded by the following kernel
messages:
ahci 0000:28:00.0: Using 64-bit DMA addresses
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000]
The first message is produced by code in drivers/iommu/dma-iommu.c
which is accompanied by the following comment that seems to apply:
/*
* Try to use all the 32-bit PCI addresses first. The original SAC vs.
* DAC reasoning loses relevance with PCIe, but enough hardware and
* firmware bugs are still lurking out there that it's safest not to
* venture into the 64-bit space until necessary.
*
* If your device goes wrong after seeing the notice then likely either
* its driver is not setting DMA masks accurately, the hardware has
* some inherent bug in handling >32-bit addresses, or not all the
* expected address bits are wired up between the device and the IOMMU.
*/
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual
address 0xffffffff00000000 produces the following I/O page faults:
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010]
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010]
Note that the upper 21 bits of the logged DMA address are zero. (When
asking a different PCIe device in the same PCIe slot to DMA to the
same I/O virtual address, we do see all the upper 32 bits of the DMA
address as 1, so this is not an issue with the chipset or IOMMU
configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA
addresses to 1 produces no discernible effect on the behavior of the
ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address
limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia
parts as well, but we limit it to the PCI IDs known to refer to
ASM1061 parts, as that's the only part we know for sure to be affected
by this issue at this point.
Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: drop date from error messages in commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The fill ring of the XDP socket may contain not enough buffers to
completey fill the RX queue during socket creation. In this case the
flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX
queue is not completely filled during polling.
Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled
during XDP socket creation.
Fixes: 3fc2333933 ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX data buffer includes the FCS. The FCS is already stripped for the
normal data path. But for the XDP data path the FCS is included and
acts like additional/useless data.
Remove the FCS from the RX data buffer also for XDP.
Fixes: 65b28c8100 ("tsnep: Add XDP RX support")
Fixes: 3fc2333933 ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmWwxyoACgkQSD+KveBX
+j5yIwgAm37qO63rmb+1SVWy8FHmY7W4UUq6NEnReDRncVfnCazZ1Vh/ki0Qzzck
4fEjqIfacV2NSQdCuRlQzWU6SH/N+QlLUHF0gL8fSAgDq/tCuMg8Ln9ZCMbobRpZ
31qLKkkPQ1HIcadmoOuHNN8nslOxWm1Vlkqxj9CqUkV9OT3S6Hu1SWmBCzlSN8sN
vvoDNkR8uTg+229HEf3visTpuyezu2fnBL5rNzkByb4TMn0ns0lcF79bYPh8Xa7p
dszLpQw/gYQqzmo+Kh3bG6lUOKEZjbN8IUoa+nlNKQlyQIhxAegNzakSQ4ocgcLd
aRZMqqfFpk5OhukevnLa/0wYTy1ScA==
=bU/e
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-01-24
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: fix a potential double-free in fs_any_create_groups
net/mlx5e: fix a double-free in arfs_create_groups
net/mlx5e: Ignore IPsec replay window values on sender side
net/mlx5e: Allow software parsing when IPsec crypto is enabled
net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO
net/mlx5: DR, Can't go to uplink vport on RX rule
net/mlx5: DR, Use the right GVMI number for drop action
net/mlx5: Bridge, fix multicast packets sent to uplink
net/mlx5: Fix a WARN upon a callback command failure
net/mlx5e: Fix peer flow lists handling
net/mlx5e: Fix inconsistent hairpin RQT sizes
net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context
net/mlx5: Fix query of sd_group field
net/mlx5e: Use the correct lag ports number when creating TISes
====================
Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>