Problem:
Under memory pressure when GTT domain is almost full multihop assert
will come up when trying to evict LRU BO from VRAM to SYSTEM.
Fix:
Don't assert on multihop error in evict code but rather do a retry
as we do in ttm_bo_move_buffer
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-6-andrey.grodzovsky@amd.com
This was a workaround for bugs in hardware on earlier Pi models
and wasn't totally successful.
It makes audio quality worse on a Pi4 at the higher sample rates
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-10-maxime@cerno.tech
Without this bit set, HDMI_MAI_FORMAT doesn't pick up
the format and samplerate from DVP_CFG_MAI0_FMT and you
can't get HDMI_HDMI_13_AUDIO_STATUS_1 to indicate HBR mode
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-9-maxime@cerno.tech
The hardware uses this for generating the right audio
data island packets when using formats other than PCM
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-8-maxime@cerno.tech
Symptom is random switching of speakers when using multichannel.
Repeatedly running speakertest -c8 occasionally starts with
channels jumbled. This is fixed with HD_CTL_WHOLSMP.
The other bit looks beneficial and apears harmless in testing so
I'd suggest adding it too.
Documentation says: HD_CTL_WHILSMP_SET
Wait for whole sample. When this bit is set MAI transmit will start
only when there is at least one whole sample available in the fifo.
Documentation says: HD_CTL_CHALIGN_SET
Channel Align When Overflow. This bit is used to realign the audio
channels in case of an overflow.
If this bit is set, after the detection of an overflow, equal
amount of dummy words to the missing words will be written to fifo,
filling up the broken sample and maintaining alignment.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525132354.297468-7-maxime@cerno.tech
Improvements to the hdmi-codec driver and ALSA infrastructure around it
to support the HDMI Channel Mapping and IEC958 controls
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMHitQAKCRDj7w1vZxhR
# xQ40AP49z0mUifkpbyUvYwdmrUVlg2JEWSTOWaH3tp0kke/dBQEA1vYxdMimhFu3
# SYKXxgtvlT7vL48vNYBxGbNuGQvzJw4=
# =IWna
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 10 Jun 2021 12:00:21 PM CEST
# gpg: using EDDSA key 5C1337A45ECA9AEB89060E9EE3EF0D6F671851C5
# gpg: Good signature from "Maxime Ripard <maxime.ripard@anandra.org>" [unknown]
# gpg: aka "Maxime Ripard <mripard@kernel.org>" [unknown]
# gpg: aka "Maxime Ripard (Work Address) <maxime@cerno.tech>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: BE56 75C3 7E81 8C8B 5764 241C 254B CFC5 6BF6 CE8D
# Subkey fingerprint: 5C13 37A4 5ECA 9AEB 8906 0E9E E3EF 0D6F 6718 51C5
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610122550.jnriewchqspdcrwk@gilmour
The drm_connector detect, drm_dp_aux transfer and mipi_dsi_host
operations typically require to access their underlying device to
perform what is expected of them.
However, there's no guarantee on the fact that the device has been
enabled through atomic_enable or similar that will usually power the
device. The access to an unpowered device is then an undefined behaviour
ranging from the access being ignored to a hard CPU hang.
Let's document that expectation to avoid as much as possible those
consequences.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-3-maxime@cerno.tech
Drivers that allow concurrent access over multiple DP channels need to
provide additional locking, even though the hw_mutex field might
indicate otherwise. Clarify it in the documentation.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-2-maxime@cerno.tech
If the framebuffer associated with the plane contains a fence, then
it is added to resource_flush and will be waited upon for a max of
50 msecs or until it is signalled by the Host.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210610232456.671905-4-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add prepare and cleanup routines for primary planes as well
where a fence is added only if the BO/FB associated with the
plane is a guest blob.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210610232456.671905-2-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Default list_limit and size_limit_mb are not big enough to cover all
possible use cases. For example, list_limit could be well over its default,
1024 if only one or several pages are chained in all individual list entries
when creating dmabuf backed by >4MB buffer. list_limit and size_limit_mb are
now defined as module parameters so that those can be optionally configured
by root with proper values to remove these constraints.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210611212107.9876-1-dongwon.kim@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Christian and me realized we have a pretty massive disconnect about
different interpretations of what dma_resv is used for by different
drivers. The discussion is much, much bigger than this change here,
but this is an important one:
Non-dynamic exporters must guarantee that the memory they return is
ready for use. They cannot expect importers to wait for the exclusive
fence. Only dynamic importers are required to obey the dma_resv fences
strictly (and more patches are needed to define exactly what this
means).
Christian has patches to update nouvea, radeon and amdgpu. The only
other driver using both ttm and supporting dma-buf export is qxl,
which only uses synchronous ttm_bo_move.
v2: To hammer this in document that dynamic importers _must_ wait for
the exclusive fence after having called dma_buf_map_attachment.
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621151758.2347474-1-daniel.vetter@ffwll.ch
Drop the workaround and instead implement a better solution.
Basically we are now chaining all submissions using a dma_fence_chain
container and adding them as exclusive fence to the dma_resv object.
This way other drivers can still sync to the single exclusive fence
while amdgpu only sync to fences from different processes.
v3: add the shared fence first before the exclusive one
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614174536.5188-2-christian.koenig@amd.com
Unwrap the explicit fence if it is a dma_fence_chain and
sync to the first fence not matching the owner rules.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614174536.5188-1-christian.koenig@amd.com
Instead of storing a copy of the display mode in the sn65dsi83
structure, retrieve it from the atomic state in
sn65dsi83_atomic_enable(). This allows the removal of the .mode_set()
operation, and completes the transition to the atomic API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-6-laurent.pinchart@ideasonboard.com
The driver currently iterates over all connectors to get the bus format,
used to configure the LVDS output format. This causes several issues:
- If other connectors than the LVDS output are present, the format used
by the driver may end up belonging to an entirely different output.
- The code can crash if some connectors are not connected, as bus_format
may then be NULL.
- There's no guarantee that the bus format on the connector at the
output of the pipeline matches the output of the sn65dsi83, as there
may be other bridges in the pipeline.
Solve this by retrieving the format from the bridge state instead, which
provides the format corresponding to the output of the bridge.
The struct sn65dsi83 lvds_format_24bpp and lvds_format_jeida fields are
moved to local variables in sn65dsi83_atomic_enable() as they're now
used in that function only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-5-laurent.pinchart@ideasonboard.com
Use the atomic version of the enable/disable operations to continue the
transition to the atomic API, started with the introduction of
.atomic_get_input_bus_fmts(). This will be needed to access the mode
from the atomic state.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-4-laurent.pinchart@ideasonboard.com
Pass the display mode explicitly to the sn65dsi83_get_lvds_range() and
sn65dsi83_get_dsi_range() functions to prepare for its removal from the
sn65dsi83 structure. This is not meant to bring any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-3-laurent.pinchart@ideasonboard.com
The LVDS format is selected based on the bus format reported by the
connector. This is currently done in .mode_fixup(), but that's not the
right place, as the format should be selected when setting the mode.
Move it to .mode_set().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-2-laurent.pinchart@ideasonboard.com
The connector_type for following two EDT displays is missing:
- EDT ETM0430G0DH6
- EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-2-s.riedmueller@phytec.de
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
Add the corresponding connector type and 8 bpc as default bus_format.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621150930.86617-1-s.riedmueller@phytec.de
Patching the connector format is causing various problematic
side effects. Implement .atomic_get_input_bus_fmts callback
instead, which sets up the input (DSI-end) format, and that
format can then be used in pipeline format negotiation between
the DSI-end of this bridge and the other component closer to
the scanout engine.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224208.184719-1-marex@denx.de
Currently a loop scans through the connector list checking
for connectors that do not match a specific criteria. The
use of the continue statement is a little unintuitive and
can confuse static analysis checking. Invert the criteria
matching logic and use a break to terminate the loop once
the first suitable connector has been found.
Thanks to Patrik Jakobsson for explaining the original
intent of the code and suggesting this change.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618183524.590186-1-colin.king@canonical.com
There is a reversed if statement in amdgpu_preempt_mgr_new() so it
always returns -ENOMEM.
Fixes: 09b020bb05 ("Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxbQXg/Wqm0ACxt@mwanda
Signed-off-by: Christian König <christian.koenig@amd.com>
There were still a race condition between hpd work and suspend, since
the workqueue work can still be run after anx7625 had powered off in
suspend.
Since we never want hpd work to run while suspending, and there's no
harm to delay them to be run after resume, mark the workqueue as
WQ_FREEZABLE so all works won't run while suspending.
Fixes: 409776fa3c ("drm/bridge: anx7625: add suspend / resume hooks")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615032937.2328468-1-pihsun@chromium.org
This adds a new "DMA Buffer ioctls" section to the dma-buf docs and adds
documentation for DMA_BUF_IOCTL_SYNC.
v2 (Daniel Vetter):
- Fix a couple typos
- Add commentary about synchronization with other devices
- Use item list format for describing flags
v3 (Pekka Paalanen):
- Clarify stalling requirements.
- Be more clear that that DMA_BUF_IOCTL_SYNC with SINC_END has to be
called before more GPU work happens.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617194258.579011-1-jason@jlekstrand.net
Change
2ef4fb9236 ("drm/vmwgfx: Make sure bo's are unpinned before putting them back")
caused a conflict in one of the drm trees and the merge commit
68a32ba141 ("Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm")
accidently re-added code that the original change was removing.
Fixed by removing the incorrect buffer unpin - it has already been unpinned
two lines above.
Fixes: 68a32ba141 ("Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-4-zackr@vmware.com
Register accesses are always 4bytes, accidently this was changed to
a void pointer whwqich badly breaks 64bit archs when running on top
of svga3.
Fixes: 2cd80dbd35 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-3-zackr@vmware.com
Historically our device headers have been forked versions of the
internal device headers, this has made maintaining them a bit
of a burden. To fix the situation, going forward, the device headers
will be verbatim copies of the internal headers.
To do that the driver code has to be adapted to use pristine
device headers. This will make future update to the device
headers trivial and automatic.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-2-zackr@vmware.com
Roland will be focusing on lavapipe over the next few months and
won't have time for vmwgfx.
vmwgfx is now maintained within drm-misc.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-1-zackr@vmware.com
DRM currently polls for the HDMI connector status every 10s, which can
be an issue when we connect/disconnect a display quickly or the device
on the other end only issues a hotplug pulse (for example on EDID
change).
Switch the driver to rely on the internal controller logic for the
BCM2711/RPi4.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524132018.264396-1-maxime@cerno.tech
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Signed-off-by: Yu Jiahua <yujiahua1@huawei.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616034448.34919-1-yujiahua1@huawei.com
Overview
========
The patch adds DMA-BUF statistics to /sys/kernel/dmabuf/buffers. It
allows statistics to be enabled for each DMA-BUF in sysfs by enabling
the config CONFIG_DMABUF_SYSFS_STATS.
The following stats will be exposed by the interface:
/sys/kernel/dmabuf/buffers/<inode_number>/exporter_name
/sys/kernel/dmabuf/buffers/<inode_number>/size
/sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/device
/sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/map_counter
The inode_number is unique for each DMA-BUF and was added earlier [1]
in order to allow userspace to track DMA-BUF usage across different
processes.
Use Cases
=========
The interface provides a way to gather DMA-BUF per-buffer statistics
from production devices. These statistics will be used to derive DMA-BUF
per-exporter stats and per-device usage stats for Android Bug reports.
The corresponding userspace changes can be found at [2].
Telemetry tools will also capture this information(along with other
memory metrics) periodically as well as on important events like a
foreground app kill (which might have been triggered by Low Memory
Killer). It will also contribute to provide a snapshot of the system
memory usage on other events such as OOM kills and Application Not
Responding events.
Background
==========
Currently, there are two existing interfaces that provide information
about DMA-BUFs.
1) /sys/kernel/debug/dma_buf/bufinfo
debugfs is however unsuitable to be mounted in production systems and
cannot be considered as an alternative to the sysfs interface being
proposed.
2) proc/<pid>/fdinfo/<fd>
The proc/<pid>/fdinfo/<fd> files expose information about DMA-BUF fds.
However, the existing procfs interfaces can only provide information
about the buffers for which processes hold fds or have the buffers
mmapped into their address space. Since the procfs interfaces alone
cannot provide a full picture of all DMA-BUFs in the system, there is
the need for an alternate interface to provide this information on
production systems.
The patch contains the following major improvements over v1:
1) Each attachment is represented by its own directory to allow creating
a symlink to the importing device and to also provide room for future
expansion.
2) The number of distinct mappings of each attachment is exposed in a
separate file.
3) The per-buffer statistics are now in /sys/kernel/dmabuf/buffers
inorder to make the interface expandable in future.
All of the improvements above are based on suggestions/feedback from
Daniel Vetter and Christian König.
A shell script that can be run on a classic Linux environment to read
out the DMA-BUF statistics can be found at [3](suggested by John
Stultz).
[1]: https://lore.kernel.org/patchwork/patch/1088791/
[2]: https://android-review.googlesource.com/q/topic:%22dmabuf-sysfs%22+(status:open%20OR%20status:merged)
[3]: https://android-review.googlesource.com/c/platform/system/memory/libmeminfo/+/1549734
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603214758.2955251-1-hridya@google.com
The SPI access to s6e63m0 is using the DBI protocol, so switch
to using the elaborate DBI protocol implementation in the DRM
DBI helper library.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-2-linus.walleij@linaro.org
Implement SPI reads for typec1, for SPI controllers that
can support 9bpw in addition to 8bpw (such as GPIO bit-banged
SPI).
9bpw emulation is not supported but we have to start with
something.
This is used by s6e63m0 to read display MTP information
which is used by the driver for backlight control.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-1-linus.walleij@linaro.org
Add a common allocation helper. Cleaning up the mix of kzalloc/kmalloc
and some unused code in the selftest.
v2: polish kernel doc a bit
v3: polish kernel doc even a bit more
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611120301.10595-3-christian.koenig@amd.com
- Convert i915 lmem handling to ttm.
- Add a patch to temporarily add a driver_private member to vma_node.
- Use this to allow mixed object mmap handling for i915.
-----BEGIN PGP SIGNATURE-----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=mB3w
-----END PGP SIGNATURE-----
Merge tag 'tags/topic/i915-ttm-2021-06-11' into drm-misc-next
drm-misc and drm-intel pull request for topic/i915-ttm:
- Convert i915 lmem handling to ttm.
- Add a patch to temporarily add a driver_private member to vma_node.
- Use this to allow mixed object mmap handling for i915.
The declarations of ttm_range_man_init and ttm_range_man_fini
have been moved to ttm_range_manager.h so we have to add it
to the include list.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3eb7d96e94 ("drm/ttm: flip over the range manager to self allocated nodes")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-10-zackr@vmware.com
vmw_chipset was duplicating pci_id. They are exactly the same
variable just with two different names. Becuase pci_id was
already used to detect the SVGA version, there's no point
in having vmw_chipset and thus we can remove it.
All references to vmw_chipset should use pci_id.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-9-zackr@vmware.com
Original vmw_mksstat_remove_ioctl expected pid to match the corresponding vmw_mksstat_add_ioctl.
That made impossible en-masse removals by one pid, which is a valid use case, so pid match was
discarded. Current change enforces a broader pgid match as a form of protection from arbitrary
processes interrupting an ongoing mks-guest-stats.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-8-zackr@vmware.com
