A data corruption problem was reported by CoreOS image builders
when using reflink based disk image copies and then converting
them to qcow2 images. The converted images failed the conversion
verification step, and it was isolated down to the fact that
qemu-img uses SEEK_HOLE/SEEK_DATA to find the data it is supposed to
copy.
The reproducer allowed me to isolate the issue down to a region of
the file that had overlapping data and COW fork extents, and the
problem was that the COW fork extent was being reported in it's
entirity by xfs_seek_iomap_begin() and so skipping over the real
data fork extents in that range.
This was somewhat hidden by the fact that 'xfs_bmap -vvp' reported
all the extents correctly, and reading the file completely (i.e. not
using seek to skip holes) would map the file correctly and all the
correct data extents are read. Hence the problem is isolated to just
the xfs_seek_iomap_begin() implementation.
Instrumentation with trace_printk made the problem obvious: we are
passing the wrong length to xfs_trim_extent() in
xfs_seek_iomap_begin(). We are passing the end_fsb, not the
maximum length of the extent we want to trim the map too. Hence the
COW extent map never gets trimmed to the start of the next data fork
extent, and so the seek code treats the entire COW fork extent as
unwritten and skips entirely over the data fork extents in that
range.
Link: https://github.com/coreos/coreos-assembler/issues/3728
Fixes: 60271ab79d ("xfs: fix SEEK_DATA for speculative COW fork preallocation")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
These functions aren't used anymore, so get rid of them.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Convert xfarray_pagesort to handle large folios by introducing a new
xfile_get_folio routine that can return a folio of arbitrary size, and
using heapsort on the full folio. This also corrects an off-by-one bug
in the calculation of len in xfarray_pagesort that was papered over by
xfarray_want_pagesort.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfiles are shmem files, not memfds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now that xfile pages don't need kmapping, there is no need to cache
the kernel virtual address for them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add helper similar to file_{get,set}_page, but which deal with folios
and don't allocate new folio unless explicitly asked to, which map
to shmem_get_folio instead of calling into the aops.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Switch to using shmem_get_folio in xfile_load instead of using
shmem_read_mapping_page_gfp. This gets us support for large folios
and also optimized reading from unallocated space, as
shmem_get_folio with SGP_READ won't allocate a page for them just
to zero the content.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Switch to using shmem_get_folio and manually dirtying the page instead
of abusing aops->write_begin and aops->write_end in xfile_get_page.
This simplifies the code by not doing indirect calls of not actually
exported interfaces that don't really fit the use case very well, and
happens to get us large folio support for free.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
XFS is generally used on 64-bit, non-highmem platforms and xfile
mappings are accessed all the time. Reduce our pain by not allowing
any highmem mappings in the xfile page cache and remove all the kmap
calls for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_read_mapping_page_gfp always returns an uptodate page or an
ERR_PTR. Remove the code that tries to handle a non-uptodate page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
All current and pending xfile users use the xfile_obj_load
and xfile_obj_store API, so make those the actual implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
vfs_getattr is needed to query inode attributes for unknown underlying
file systems. But shmemfs is well known for users of shmem_file_setup
and shmem_read_mapping_page_gfp that rely on it not needing specific
inode revalidation and having a normal mapping. Remove the detour
through the getattr method and an extra wrapper, and just read the
inode size and i_bytes directly in the scrub tracing code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_file_setup is explicitly intended for a file that can be
fully read and written by kernel users without restrictions. Don't
poke into internals to change random flags in the file or inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_kernel_file_setup is equivalent to shmem_file_setup except that it
already sets the S_PRIVATE flag. Use it instead of open coding the
logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
shmem_file_setup always returns a struct file pointer or an ERR_PTR,
so remove the code to check for a NULL return.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfile_create creates a (potentially large) sparse file. Pass
VM_NORESERVE to shmem_file_setup to not account for the entire file size
at file creation time.
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Another incorrect conversion to kfree() instead of kvfree().
Fixes: 4929257613 ("xfs: convert kmem_free() for kvmalloc users to kvfree()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Wrongly converted from kmem_free() to kfree().
Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 4929257613 ("xfs: convert kmem_free() for kvmalloc users to kvfree()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
mrlock was an rwsem wrapper that also recorded whether the lock was
held for read or write. Now that we can ask the generic code whether
the lock is held for read or write, we can remove this wrapper and use
an rwsem directly.
As the comment says, we can't use lockdep to assert that the ILOCK is
held for write, because we might be in a workqueue, and we aren't able
to tell lockdep that we do in fact own the lock.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
To use the new rwsem_assert_held()/rwsem_assert_held_write(), we can't
use the existing ASSERT macro. Add a new xfs_assert_ilocked() and
convert all the callers.
Fix an apparent bug in xfs_isilocked(): If the caller specifies
XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL, xfs_assert_ilocked() will check both
the IOLOCK and the ILOCK are held for write. xfs_isilocked() only
checked that the ILOCK was held for write.
xfs_assert_ilocked() is always on, even if DEBUG or XFS_WARN aren't
defined. It's a cheap check, so I don't think it's worth defining
it away.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Without this the kernel crashes in kfree for files with a sufficiently
large number of extents.
Fixes: d4c75a1b40 ("xfs: convert remaining kmem_free() to kfree()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While performing the IO fault injection test, I caught the following data
corruption report:
XFS (dm-0): Internal error ltbno + ltlen > bno at line 1957 of file fs/xfs/libxfs/xfs_alloc.c. Caller xfs_free_ag_extent+0x79c/0x1130
CPU: 3 PID: 33 Comm: kworker/3:0 Not tainted 6.5.0-rc7-next-20230825-00001-g7f8666926889 #214
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
Workqueue: xfs-inodegc/dm-0 xfs_inodegc_worker
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
xfs_free_ag_extent+0x7d3/0x1130
__xfs_free_extent+0x201/0x3c0
xfs_trans_free_extent+0x29b/0xa10
xfs_extent_free_finish_item+0x2a/0xb0
xfs_defer_finish_noroll+0x8d1/0x1b40
xfs_defer_finish+0x21/0x200
xfs_itruncate_extents_flags+0x1cb/0x650
xfs_free_eofblocks+0x18f/0x250
xfs_inactive+0x485/0x570
xfs_inodegc_worker+0x207/0x530
process_scheduled_works+0x24a/0xe10
worker_thread+0x5ac/0xc60
kthread+0x2cd/0x3c0
ret_from_fork+0x4a/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
After analyzing the disk image, it was found that the corruption was
triggered by the fact that extent was recorded in both inode datafork
and AGF btree blocks. After a long time of reproduction and analysis,
we found that the reason of free sapce btree corruption was that the
AGF btree was not recovered correctly.
Consider the following situation, Checkpoint A and Checkpoint B are in
the same record and share the same start LSN1, buf items of same object
(AGF btree block) is included in both Checkpoint A and Checkpoint B. If
the buf item in Checkpoint A has been recovered and updates metadata LSN
permanently, then the buf item in Checkpoint B cannot be recovered,
because log recovery skips items with a metadata LSN >= the current LSN
of the recovery item. If there is still an inode item in Checkpoint B
that records the Extent X, the Extent X will be recorded in both inode
datafork and AGF btree block after Checkpoint B is recovered. Such
transaction can be seen when allocing enxtent for inode bmap, it record
both the addition of extent to the inode extent list and the removing
extent from the AGF.
|------------Record (LSN1)------------------|---Record (LSN2)---|
|-------Checkpoint A----------|----------Checkpoint B-----------|
| Buf Item(Extent X) | Buf Item / Inode item(Extent X) |
| Extent X is freed | Extent X is allocated |
After commit 12818d24db ("xfs: rework log recovery to submit buffers
on LSN boundaries") was introduced, we submit buffers on lsn boundaries
during log recovery. The above problem can be avoided under normal paths,
but it's not guaranteed under abnormal paths. Consider the following
process, if an error was encountered after recover buf item in Checkpoint
A and before recover buf item in Checkpoint B, buffers that have been
added to the buffer_list will still be submitted, this violates the
submits rule on lsn boundaries. So buf item in Checkpoint B cannot be
recovered on the next mount due to current lsn of transaction equal to
metadata lsn on disk. The detailed process of the problem is as follows.
First Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint A */
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
/* add buffer of agf btree block to buffer_list */
xfs_buf_delwri_queue(bp, buffer_list)
...
==> Encounter read IO error and return
/* submit buffers regardless of error */
if (!list_empty(&buffer_list))
xfs_buf_delwri_submit(&buffer_list);
<buf items of agf btree block in Checkpoint A recovery success>
Second Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint B */
xlog_recover_buf_commit_pass2
/* buffer of agf btree block wouldn't added to
buffer_list due to lsn equal to current_lsn */
if (XFS_LSN_CMP(lsn, current_lsn) >= 0)
goto out_release
<buf items of agf btree block in Checkpoint B wouldn't recovery>
In order to make sure that submits buffers on lsn boundaries in the
abnormal paths, we need to check error status before submit buffers that
have been added from the last record processed. If error status exist,
buffers in the bufffer_list should not be writen to disk.
Canceling the buffers in the buffer_list directly isn't correct, unlike
any other place where write list was canceled, these buffers has been
initialized by xfs_buf_item_init() during recovery and held by buf item,
buf items will not be released in xfs_buf_delwri_cancel(), it's not easy
to solve.
If the filesystem has been shut down, then delwri list submission will
error out all buffers on the list via IO submission/completion and do
all the correct cleanup automatically. So shutting down the filesystem
could prevents buffers in the bufffer_list from being written to disk.
Fixes: 50d5c8d8e9 ("xfs: check LSN ordering for v5 superblocks during recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
when a ifdef is used in the below manner, second one could be considered as
duplicate.
ifdef DEFINE_A
...code block...
ifdef DEFINE_A
...code block...
endif
...code block...
endif
In the xfs code two such patterns were seen. Hence removing these ifdefs.
No functional change is intended here. It only aims to improve code
readability.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While testing a 64k-blocksize filesystem, I noticed that xfs/709 fails
to rebuild the inode btree with a bunch of "Corruption remains"
messages. It turns out that when the inode chunk size is smaller than a
single filesystem block, no block alignments constraints are necessary
for inode chunk allocations, and sb_spino_align is zero. Hence we can
skip the check.
Fixes: dbfbf3bdf6 ("xfs: repair inode btrees")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Noticed by inspection, simple factoring allows the same allocation
routine to be used for both transaction and recovery contexts.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
These few remaining GFP_NOFS callers do not need to use GFP_NOFS at
all. They are only called from a non-transactional context or cannot
be accessed from memory reclaim due to other constraints. Hence they
can just use GFP_KERNEL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This is core code that needs to run in low memory conditions and
can be triggered from memory reclaim. While it runs in a workqueue,
it really shouldn't be recursing back into the filesystem during
any memory allocation it needs to function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When recovery starts processing intents, all of the initial intent
allocations are done outside of transaction contexts. That means
they need to specifically use GFP_NOFS as we do not want memory
reclaim to attempt to run direct reclaim of filesystem objects while
we have lots of objects added into deferred operations.
Rather than use GFP_NOFS for these specific allocations, just place
the entire intent recovery process under NOFS context and we can
then just use GFP_KERNEL for these allocations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When running in a transaction context, memory allocations are scoped
to GFP_NOFS. Hence we don't need to use GFP_NOFS contexts in pure
transaction context allocations - GFP_KERNEL will automatically get
converted to GFP_NOFS as appropriate.
Go through the code and convert all the obvious GFP_NOFS allocations
in transaction context to use GFP_KERNEL. This further reduces the
explicit use of GFP_NOFS in XFS.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the past we've had problems with lockdep false positives stemming
from inode locking occurring in memory reclaim contexts (e.g. from
superblock shrinkers). Lockdep doesn't know that inodes access from
above memory reclaim cannot be accessed from below memory reclaim
(and vice versa) but there has never been a good solution to solving
this problem with lockdep annotations.
This situation isn't unique to inode locks - buffers are also locked
above and below memory reclaim, and we have to maintain lock
ordering for them - and against inodes - appropriately. IOWs, the
same code paths and locks are taken both above and below memory
reclaim and so we always need to make sure the lock orders are
consistent. We are spared the lockdep problems this might cause
by the fact that semaphores and bit locks aren't covered by lockdep.
In general, this sort of lockdep false positive detection is cause
by code that runs GFP_KERNEL memory allocation with an actively
referenced inode locked. When it is run from a transaction, memory
allocation is automatically GFP_NOFS, so we don't have reclaim
recursion issues. So in the places where we do memory allocation
with inodes locked outside of a transaction, we have explicitly set
them to use GFP_NOFS allocations to prevent lockdep false positives
from being reported if the allocation dips into direct memory
reclaim.
More recently, __GFP_NOLOCKDEP was added to the memory allocation
flags to tell lockdep not to track that particular allocation for
the purposes of reclaim recursion detection. This is a much better
way of preventing false positives - it allows us to use GFP_KERNEL
context outside of transactions, and allows direct memory reclaim to
proceed normally without throwing out false positive deadlock
warnings.
The obvious places that lock inodes and do memory allocation are the
lookup paths and inode extent list initialisation. These occur in
non-transactional GFP_KERNEL contexts, and so can run direct reclaim
and lock inodes.
This patch makes a first path through all the explicit GFP_NOFS
allocations in XFS and converts the obvious ones to GFP_KERNEL |
__GFP_NOLOCKDEP as a first step towards removing explicit GFP_NOFS
allocations from the XFS code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We currently use a btree walk in the fstrim code. This requires a
btree cursor and btree cursors are only used inside transactions
except for the fstrim code. This means that all the btree operations
that allocate memory operate in both GFP_KERNEL and GFP_NOFS
contexts.
This causes problems with lockdep being unable to determine the
difference between objects that are safe to lock both above and
below memory reclaim. Free space btree buffers are definitely locked
both above and below reclaim and that means we have to mark all
btree infrastructure allocations with GFP_NOFS to avoid potential
lockdep false positives.
If we wrap this btree walk in an empty cursor, all btree walks are
now done under transaction context and so all allocations inherit
GFP_NOFS context from the tranaction. This enables us to move all
the btree allocations to GFP_KERNEL context and hence help remove
the explicit use of GFP_NOFS in XFS.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The remaining callers of kmem_free() are freeing heap memory, so
we can convert them directly to kfree() and get rid of kmem_free()
altogether.
This conversion was done with:
$ for f in `git grep -l kmem_free fs/xfs`; do
> sed -i s/kmem_free/kfree/ $f
> done
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Start getting rid of kmem_free() by converting all the cases where
memory can come from vmalloc interfaces to calling kvfree()
directly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move it to the general xfs linux wrapper header file so we can
prepare to remove kmem.h
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
kmem_alloc() is just a thin wrapper around kmalloc() these days.
Convert everything to use kmalloc() so we can get rid of the
wrapper.
Note: the transaction region allocation in xlog_add_to_transaction()
can be a high order allocation. Converting it to use
kmalloc(__GFP_NOFAIL) results in warnings in the page allocation
code being triggered because the mm subsystem does not want us to
use __GFP_NOFAIL with high order allocations like we've been doing
with the kmem_alloc() wrapper for a couple of decades. Hence this
specific case gets converted to xlog_kvmalloc() rather than
kmalloc() to avoid this issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There's no reason to keep the kmem_zalloc() around anymore, it's
just a thin wrapper around kmalloc(), so lets get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Some weird old filesytems have UUID-like things that we wish to expose
as UUIDs, but are smaller; add a length field so that the new
FS_IOC_(GET|SET)UUID ioctls can handle them in generic code.
And add a helper super_set_uuid(), for setting nonstandard length uuids.
Helper is now required for the new FS_IOC_GETUUID ioctl; if
super_set_uuid() hasn't been called, the ioctl won't be supported.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-2-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
Let the file system know how much dirty data exists at the passed
in offset. This allows file systems to allocate the right amount
of space that actually is written back if they can't eagerly
convert (e.g. because they don't support unwritten extents).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Back in the days when a single bio could only be filled to the hardware
limits, and we scheduled a work item for each bio completion, chaining
multiple bios for a single ioend made a lot of sense to reduce the number
of completions. But these days bios can be filled until we reach the
number of vectors or total size limit, which means we can always fit at
least 1 megabyte worth of data in the worst case, but usually a lot more
due to large folios. The only thing bio chaining is buying us now is
to reduce the size of the allocation from an ioend with an embedded bio
into a plain bio, which is a 52 bytes differences on 64-bit systems.
This is not worth the added complexity, so remove the bio chaining and
only use the bio embedded into the ioend. This will help to simplify
further changes to the iomap writeback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-10-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309a ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3ca ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Recently xfs/513 started failing on my test machines testing "-o
ro,norecovery" mount options. This was being emitted in dmesg:
[ 9906.932724] XFS (pmem0): no-recovery mounts must be read-only.
Turns out, readonly mounts with the fsopen()/fsconfig() mount API
have been busted since day zero. It's only taken 5 years for debian
unstable to start using this "new" mount API, and shortly after this
I noticed xfs/513 had started to fail as per above.
The syscall trace is:
fsopen("xfs", FSOPEN_CLOEXEC) = 3
mount_setattr(-1, NULL, 0, NULL, 0) = -1 EINVAL (Invalid argument)
.....
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/pmem0", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "norecovery", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = -1 EINVAL (Invalid argument)
close(3) = 0
Showing that the actual mount instantiation (FSCONFIG_CMD_CREATE) is
what threw out the error.
During mount instantiation, we call xfs_fs_validate_params() which
does:
/* No recovery flag requires a read-only mount */
if (xfs_has_norecovery(mp) && !xfs_is_readonly(mp)) {
xfs_warn(mp, "no-recovery mounts must be read-only.");
return -EINVAL;
}
and xfs_is_readonly() checks internal mount flags for read only
state. This state is set in xfs_init_fs_context() from the
context superblock flag state:
/*
* Copy binary VFS mount flags we are interested in.
*/
if (fc->sb_flags & SB_RDONLY)
set_bit(XFS_OPSTATE_READONLY, &mp->m_opstate);
With the old mount API, all of the VFS specific superblock flags
had already been parsed and set before xfs_init_fs_context() is
called, so this all works fine.
However, in the brave new fsopen/fsconfig world,
xfs_init_fs_context() is called from fsopen() context, before any
VFS superblock have been set or parsed. Hence if we use fsopen(),
the internal XFS readonly state is *never set*. Hence anything that
depends on xfs_is_readonly() actually returning true for read only
mounts is broken if fsopen() has been used to mount the filesystem.
Fix this by moving this internal state initialisation to
xfs_fs_fill_super() before we attempt to validate the parameters
that have been set prior to the FSCONFIG_CMD_CREATE call being made.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Fixes: 73e5fff98b ("xfs: switch to use the new mount-api")
cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We're only allocating from the realtime device if the inode is marked
for realtime and we're /not/ allocating into the attr fork.
Fixes: 5864346054 ("xfs: also use xfs_bmap_btalloc_accounting for RT allocations")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to remove
the sentinel. For v6.8-rc1 we get a few more updates for fs/ directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as those patches
are still being reviewed. After that we then can expect also the removal of the
no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to see further
work by Thomas Weißschuh with the constificatin of the struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have suggested
for him to become a maintainer and he's accepted. So for v6.9-rc1 I look forward
to seeing him sent you a pull request for further sysctl changes. This also
removes Iurii Zaikin as a maintainer as he has moved on to other projects and
has had no time to help at all.
-----BEGIN PGP SIGNATURE-----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=2qBt
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
* New features/functionality
* Online repair
* Reserve disk space for online repairs.
* Fix misinteraction between the AIL and btree bulkloader because of
which the bulk load fails to queue a buffer for writeback if it
happens to be on the AIL list.
* Prevent transaction reservation overflows when reaping blocks during
online repair.
* Whenever possible, bulkloader now copies multiple records into a
block.
* Support repairing of
1. Per-AG free space, inode and refcount btrees.
2. Ondisk inodes.
3. File data and attribute fork mappings.
* Verify the contents of
1. Inode and data fork of realtime bitmap file.
2. Quota files.
* Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks about
a pmem device being removed.
* Bug fixes
* Fix memory leak of recovered attri intent items.
* Fix UAF during log intent recovery.
* Fix realtime geometry integer overflows.
* Prevent scrub from live locking in xchk_iget.
* Prevent fs shutdown when removing files during low free disk space.
* Prevent transaction reservation overflow when extending an RT device.
* Prevent incorrect warning from being printed when extending a
filesystem.
* Fix an off-by-one error in xreap_agextent_binval.
* Serialize access to perag radix tree during deletion operation.
* Fix perag memory leak during growfs.
* Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size.
* Cleanups
* Remove duplicate boilerplate code spread across functionality associated
with different log items.
* Cleanup resblks interfaces.
* Pass defer ops pointer to defer helpers instead of an enum.
* Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings.
* Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size of
structures and structure member offsets. This is done in order to be
able to share the code with userspace.
* Move XFS documentation under a new directory specific to XFS.
* Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it.
* Remove duplicate inclusion of header files from scrub/health.c.
* Refactor Realtime code.
* Cleanup attr code.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZZJQbwAKCRAH7y4RirJu
9JjkAP9Zg0QZNmAMsZwvgEBbuF/OnHKl4GmPA5uq0jPmSWCOqAEA0HjlOmuNfQWn
93fIw6CPbt+9QCluTYBwUisKLIJ/wgA=
=qmO0
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
"New features/functionality:
- Online repair:
- Reserve disk space for online repairs
- Fix misinteraction between the AIL and btree bulkloader because
of which the bulk load fails to queue a buffer for writeback if
it happens to be on the AIL list
- Prevent transaction reservation overflows when reaping blocks
during online repair
- Whenever possible, bulkloader now copies multiple records into
a block
- Support repairing of
1. Per-AG free space, inode and refcount btrees
2. Ondisk inodes
3. File data and attribute fork mappings
- Verify the contents of
1. Inode and data fork of realtime bitmap file
2. Quota files
- Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks
about a pmem device being removed
Bug fixes:
- Fix memory leak of recovered attri intent items
- Fix UAF during log intent recovery
- Fix realtime geometry integer overflows
- Prevent scrub from live locking in xchk_iget
- Prevent fs shutdown when removing files during low free disk space
- Prevent transaction reservation overflow when extending an RT
device
- Prevent incorrect warning from being printed when extending a
filesystem
- Fix an off-by-one error in xreap_agextent_binval
- Serialize access to perag radix tree during deletion operation
- Fix perag memory leak during growfs
- Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size
Cleanups:
- Remove duplicate boilerplate code spread across functionality
associated with different log items
- Cleanup resblks interfaces
- Pass defer ops pointer to defer helpers instead of an enum
- Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings
- Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size
of structures and structure member offsets. This is done in order
to be able to share the code with userspace
- Move XFS documentation under a new directory specific to XFS
- Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it
- Remove duplicate inclusion of header files from scrub/health.c
- Refactor Realtime code
- Cleanup attr code"
* tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (123 commits)
xfs: use the op name in trace_xlog_intent_recovery_failed
xfs: fix a use after free in xfs_defer_finish_recovery
xfs: turn the XFS_DA_OP_REPLACE checks in xfs_attr_shortform_addname into asserts
xfs: remove xfs_attr_sf_hdr_t
xfs: remove struct xfs_attr_shortform
xfs: use xfs_attr_sf_findname in xfs_attr_shortform_getvalue
xfs: remove xfs_attr_shortform_lookup
xfs: simplify xfs_attr_sf_findname
xfs: move the xfs_attr_sf_lookup tracepoint
xfs: return if_data from xfs_idata_realloc
xfs: make if_data a void pointer
xfs: fold xfs_rtallocate_extent into xfs_bmap_rtalloc
xfs: simplify and optimize the RT allocation fallback cascade
xfs: reorder the minlen and prod calculations in xfs_bmap_rtalloc
xfs: remove XFS_RTMIN/XFS_RTMAX
xfs: remove rt-wrappers from xfs_format.h
xfs: factor out a xfs_rtalloc_sumlevel helper
xfs: tidy up xfs_rtallocate_extent_exact
xfs: merge the calls to xfs_rtallocate_range in xfs_rtallocate_block
xfs: reflow the tail end of xfs_rtallocate_extent_block
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUx4wAKCRCRxhvAZXjc
osaNAQC/c+xXVfiq/pFbuK9MQLna4RGZaGcG9k312YniXbHq0AD9HAf4aPcZwPy1
/wkD4pauj3UZ3f0xBSyazGBvAXyN0Qc=
=iFAQ
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
Instead of tracing the address of the recovery handler, use the name
in the defer op, similar to other defer ops related tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
dfp will be freed by ->recover_work and thus the tracepoint in case
of an error can lead to a use after free.
Store the defer ops in a local variable to avoid that.
Fixes: 7f2f7531e0 ("xfs: store an ops pointer in struct xfs_defer_pending")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Since commit deed951287 ("xfs: Check for -ENOATTR or -EEXIST"), the
high-level attr code does a lookup for any attr we're trying to set,
and does the checks to handle the create vs replace cases, which thus
never hit the low-level attr code.
Turn the checks in xfs_attr_shortform_addname as they must never trip.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Remove the last two users of the typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
sparse complains about struct xfs_attr_shortform because it embeds a
structure with a variable sized array in a variable sized array.
Given that xfs_attr_shortform is not a very useful structure, and the
dir2 equivalent has been removed a long time ago, remove it as well.
Provide a xfs_attr_sf_firstentry helper that returns the first
xfs_attr_sf_entry behind a xfs_attr_sf_hdr to replace the structure
dereference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_attr_shortform_getvalue duplicates the logic in xfs_attr_sf_findname.
Use the helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_attr_shortform_lookup is only used by xfs_attr_shortform_addname,
which is much better served by calling xfs_attr_sf_findname. Switch
it over and remove xfs_attr_shortform_lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_attr_sf_findname has the simple job of finding a xfs_attr_sf_entry in
the attr fork, but the convoluted calling convention obfuscates that.
Return the found entry as the return value instead of an pointer
argument, as the -ENOATTR/-EEXIST can be trivally derived from that, and
remove the basep argument, as it is equivalent of the offset of sfe in
the data for if an sfe was found, or an offset of totsize if not was
found. To simplify the totsize computation add a xfs_attr_sf_endptr
helper that returns the imaginative xfs_attr_sf_entry at the end of
the current attrs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
trace_xfs_attr_sf_lookup is currently only called by
xfs_attr_shortform_lookup, which despit it's name is a simple helper for
xfs_attr_shortform_addname, which has it's own tracing. Move the
callsite to xfs_attr_shortform_getvalue, which is the closest thing to
a high level lookup we have for the Linux xattr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Many of the xfs_idata_realloc callers need to set a local pointer to the
just reallocated if_data memory. Return the pointer to simplify them a
bit and use the opportunity to re-use krealloc for freeing if_data if the
size hits 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The xfs_ifork structure currently has a union of the if_root void pointer
and the if_data char pointer. In either case it is an opaque pointer
that depends on the fork format. Replace the union with a single if_data
void pointer as that is what almost all callers want. Only the symlink
NULL termination code in xfs_init_local_fork actually needs a new local
variable now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
There isn't really much left in xfs_rtallocate_extent now, fold it into
the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There are currently multiple levels of fall back if an RT allocation
can not be satisfied:
1) xfs_rtallocate_extent extends the minlen and reduces the maxlen due
to the extent size hint. If that can't be done, it return -ENOSPC
and let's xfs_bmap_rtalloc retry, which then not only drops the
extent size hint based alignment, but also the minlen adjustment
2) if xfs_rtallocate_extent gets -ENOSPC from the underlying functions,
it only drops the extent size hint based alignment and retries
3) if that still does not succeed, xfs_rtallocate_extent drops the
extent size hint (which is a complex no-op at this point) and the
minlen using the same code as (1) above
4) if that still doesn't success and the caller wanted an allocation
near a blkno, drop that blkno hint.
The handling in 1 is rather inefficient as we could just drop the
alignment and continue, and 2/3 interact in really weird ways due to
the duplicate policy.
Move aligning the min and maxlen out of xfs_rtallocate_extent and into
a helper called directly by xfs_bmap_rtalloc. This allows just
continuing with the allocation if we have to drop the alignment instead
of going through the retry loop and also dropping the perfectly usable
minlen adjustment that didn't cause the problem, and then just use
a single retry that drops both the minlen and alignment requirement
when we really are out of space, thus consolidating cases (2) and (3)
above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_bmap_rtalloc is a bit of a mess in terms of calculating the locally
need variables. Reorder them a bit so that related code is located
next to each other - the raminlen calculation moves up next to where
the maximum len is calculated, and all the prod calculation is move
into a single place and rearranged so that the real prod calculation
only happens when it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the kernel min/max helpers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_format.h has a bunch odd wrappers for helper functions and mount
structure access using RT* prefixes. Replace them with their open coded
versions (for those that weren't entirely unused) and remove the wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_rtallocate_extent_size has two loops with nearly identical logic
in them. Split that logic into a separate xfs_rtalloc_sumlevel helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use common code for both xfs_rtallocate_range calls by moving
the !isfree logic into the non-default branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use a goto to use a common tail for the case of being able to allocate
an extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Change polarity of a check so that the successful case of being able to
allocate an extent is in the main path of the function and error handling
is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Doing a break in the else side of a conditional is rather silly. Invert
the check, break ASAP and unindent the other leg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Inline the logic of xfs_rtmodify_summary_int into xfs_rtmodify_summary
and xfs_rtget_summary instead of having a somewhat awkward helper to
share a little bit of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_rtmodify_summary_int is only used inside xfs_rtbitmap.c and to
implement xfs_rtget_summary. Move xfs_rtget_summary to xfs_rtbitmap.c
as the exported API and mark xfs_rtmodify_summary_int static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Clean up the logical in xfs_bmap_rtalloc that tries to find a rtextent
to start the search from by using a separate variable for the hint, not
calling xfs_bmap_adjacent when we want to ignore the locality and avoid
an extra roundtrip converting between block numbers and RT extent
numbers.
As a side-effect this doesn't pointlessly call xfs_rtpick_extent and
increment the start rtextent hint if we are going to ignore the result
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Add a return value to xfs_bmap_adjacent to indicate if it did change
ap->blkno or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Reorder the tail end of xfs_bmap_rtalloc so that the successfully
allocation is in the main path, and the error handling is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Just return -ENOSPC instead of returning 0 and setting the return rt
extent number to NULLRTEXTNO. This is turn removes all users of
NULLRTEXTNO, so remove that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_bmap_rtalloc is currently in xfs_bmap_util.c, which is a somewhat
odd spot for it, given that is only called from xfs_bmap.c and calls
into xfs_rtalloc.c to do the actual work. Move xfs_bmap_rtalloc to
xfs_rtalloc.c and mark xfs_rtpick_extent xfs_rtallocate_extent and
xfs_rtallocate_extent static now that they aren't called from outside
of xfs_rtalloc.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Make xfs_bmap_btalloc_accounting more generic by handling the RT quota
reservations and then also use it from xfs_bmap_rtalloc instead of
open coding the accounting logic there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_bmap_btalloc_accounting only uses the len field from args, but that
has just been propagated to ap->length field by the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Without this upcoming change can cause an unused variable warning,
when adding a local variable for the fields field passed to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
minlen is the lower bound on the extent length that the caller can
accept, and maxlen is at this point the maximal available length.
This means a minlen extent is perfectly fine to use, so do it. This
matches the equivalent logic in xfs_rtallocate_extent_exact that also
accepts a minlen sized extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
remove the second ones:
\#include "xfs_trans_resv.h"
\#include "xfs_mount.h"
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
During growfs, if new ag in memory has been initialized, however
sb_agcount has not been updated, if an error occurs at this time it
will cause perag leaks as follows, these new AGs will not been freed
during umount , because of these new AGs are not visible(that is
included in mp->m_sb.sb_agcount).
unreferenced object 0xffff88810be40200 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
00 c0 c1 05 81 88 ff ff 04 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 381741e2):
[<ffffffff8191aef6>] __kmalloc+0x386/0x4f0
[<ffffffff82553e65>] kmem_alloc+0xb5/0x2f0
[<ffffffff8238dac5>] xfs_initialize_perag+0xc5/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
unreferenced object 0xffff88810be40800 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
20 00 00 00 00 00 00 00 57 ef be dc 00 00 00 00 .......W.......
10 08 e4 0b 81 88 ff ff 10 08 e4 0b 81 88 ff ff ................
backtrace (crc bde50e2d):
[<ffffffff8191b43a>] __kmalloc_node+0x3da/0x540
[<ffffffff81814489>] kvmalloc_node+0x99/0x160
[<ffffffff8286acff>] bucket_table_alloc.isra.0+0x5f/0x400
[<ffffffff8286bdc5>] rhashtable_init+0x405/0x760
[<ffffffff8238dda3>] xfs_initialize_perag+0x3a3/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
Factor out xfs_free_unused_perag_range() from xfs_initialize_perag(),
used for freeing unused perag within a specified range in error handling,
included in the error path of the growfs failure.
Fixes: 1c1c6ebcf5 ("xfs: Replace per-ag array with a radix tree")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Take mp->m_perag_lock for deletions from the perag radix tree in
xfs_initialize_perag to prevent racing with tagging operations.
Lookups are fine - they are RCU protected so already deal with the
tree changing shape underneath the lookup - but tagging operations
require the tree to be stable while the tags are propagated back up
to the root.
Right now there's nothing stopping radix tree tagging from operating
while a growfs operation is progress and adding/removing new entries
into the radix tree.
Hence we can have traversals that require a stable tree occurring at
the same time we are removing unused entries from the radix tree which
causes the shape of the tree to change.
Likely this hasn't caused a problem in the past because we are only
doing append addition and removal so the active AG part of the tree
is not changing shape, but that doesn't mean it is safe. Just making
the radix tree modifications serialise against each other is obviously
correct.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Upon a closer inspection of the quota record scrubber, I noticed that
dqiterate wasn't actually walking all possible dquots for the mapped
blocks in the quota file. This is due to xfs_qm_dqget_next skipping all
XFS_IS_DQUOT_UNINITIALIZED dquots.
For a fsck program, we really want to look at all the dquots, even if
all counters and limits in the dquot record are zero. Rewrite the
implementation to do this, as well as switching to an iterator paradigm
to reduce the number of indirect calls.
This enables removal of the old broken dqiterate code from xfs_dquot.c.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For each dquot resource, ensure either (a) the resource usage is over
the soft limit and there is a nonzero timer; or (b) usage is at or under
the soft limit and the timer is unset. (a) is redundant with the dquot
buffer verifier, but (b) isn't checked anywhere.
Found by fuzzing xfs/426 and noticing that diskdq.btimer = add didn't
trip any kind of warning for having a timer set even with no limits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Each xfs_dquot object caches the file offset and daddr of the ondisk
block that backs the dquot. Make sure these cached values are the same
as the bmapi data, and that the block state is written.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix all the file metadata surrounding the realtime bitmap file, which
includes the rt geometry, file size, forks, and space mappings. The
bitmap contents themselves cannot be fixed without rt rmap, so that will
come later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new helper to unmap blocks from an inode's fork.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a helper function to repair the core and forks of a metadata inode,
so that we can get move onto the task of repairing higher level metadata
that lives in an inode.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS filesystems always have a realtime bitmap and summary file, even if
there has never been a realtime volume attached. Always check them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I forgot that the xfs_mount tracks the size and number of levels in the
realtime summary file, and that the rt summary file can have more blocks
mapped to the data fork than m_rsumsize implies if growfsrt fails.
So. Add to the rtsummary scrubber an explicit check that all the
summary geometry values are correct, then adjust the rtsummary i_size
checks to allow for the growfsrt failure case. Finally, flag post-eof
blocks in the summary file.
While we're at it, split the extent map checking so that we only call
xfs_bmapi_read once per extent instead of once per rtsummary block.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I forgot that the superblock tracks the number of blocks that are in the
realtime bitmap, and that the rt bitmap file can have more blocks mapped
to the data fork than sb_rbmblocks if growfsrt fails.
So. Add to the rtbitmap scrubber an explicit check that sb_rextents and
sb_rbmblocks are correct, then adjust the rtbitmap i_size checks to
allow for the growfsrt failure case. Finally, flag post-eof blocks in
the rtbitmap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Try to repair errors that we see in file CoW forks so that we don't do
stupid things like remap garbage into a file. There's not a lot we can
do with the COW fork -- the ondisk metadata record only that the COW
staging extents are owned by the refcount btree, which effectively means
that we can't reconstruct this incore structure from scratch.
Actually, this is even worse -- we can't touch written extents, because
those map space that are actively under writeback, and there's not much
to do with delalloc reservations. Hence we can only detect crosslinked
unwritten extents and fix them by punching out the problematic parts and
replacing them with delalloc extents.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement ranged queries for refcount records. The next patch will use
this to scan refcount data.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are a couple of conditions that userspace can set to force repairs
of metadata. These really belong in the repair code and not open-coded
into the check code, so refactor them into a helper.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use the reverse-mapping btree information to rebuild an inode block map.
Update the btree bulk loading code as necessary to support inode rooted
btrees and fix some bitrot problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Back in commit a55e073088 ("xfs: only allow reaping of per-AG
blocks in xrep_reap_extents"), we removed from the reaping code the
ability to handle bmbt blocks. At the time, the reaping code only
walked single blocks, didn't correctly detect crosslinked blocks, and
the special casing made the function hard to understand. It was easier
to remove unneeded functionality prior to fixing all the bugs.
Now that we've fixed the problems, we want again the ability to reap
file metadata blocks. Reintroduce the per-file reaping functionality
atop the current implementation. We require that sc->sa is
uninitialized, so that we can use it to hold all the per-AG context for
a given extent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The attribute fork scrubber can optionally scan the reverse mapping
records of the filesystem to determine if the fork is missing mappings
that it should have. However, this is a very expensive operation, so we
only want to do this if we suspect that the fork is missing records.
For attribute forks the criteria for suspicion is that the attr fork is
in EXTENTS format and has zero extents.
However, there are several ways that a file can end up in this state
through regular filesystem usage. For example, an LSM can set a
s_security hook but then decide not to set an ACL; or an attr set can
create the attr fork but then the actual set operation fails with
ENOSPC; or we can delete all the attrs on a file whose data fork is in
btree format, in which case we do not delete the attr fork. We don't
want to run the expensive check for any case that can be arrived at
through regular operations.
However.
When online inode repair decides to zap an attribute fork, it cannot
determine if it is zapping ACL information. As a precaution it removes
all the discretionary access control permissions and sets the user and
group ids to zero. Check these three additional conditions to decide if
we want to scan the rmap records.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In a previous patch, we added some code to perform sufficient repairs
to an ondisk inode record such that the inode cache would be willing to
load the inode. If the broken inode was a shortform directory, it will
reset the directory to something plausible, which is to say an empty
subdirectory of the root. The telltale signs that something is
seriously wrong is the broken link count.
Such directories look clean, but they shouldn't participate in a
filesystem scan to find or confirm a directory parent pointer. Create a
predicate that identifies such directories and abort the scrub.
Found by fuzzing xfs/1554 with multithreaded xfs_scrub enabled and
u3.bmx[0].startblock = zeroes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Determine if inode fork damage is responsible for the inode being unable
to pass the ifork verifiers in xfs_iget and zap the fork contents if
this is true. Once this is done the fork will be empty but we'll be
able to construct an in-core inode, and a subsequent call to the inode
fork repair ioctl will search the rmapbt to rebuild the records that
were in the fork.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If an inode is so badly damaged that it cannot be loaded into the cache,
fix the ondisk metadata and try again. If there /is/ a cached inode,
fix any problems and apply any optimizations that can be solved incore.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In a few patches, we'll add some online repair code that tries to
massage the ondisk inode record just enough to get it to pass the inode
verifiers so that we can continue with more file repairs. Part of that
massaging can include zapping the ondisk forks to clear errors. After
that point, the bmap fork repair functions will rebuild the zapped
forks.
Christoph asked for stronger protections against online repair zapping a
fork to get the inode to load vs. other threads trying to access the
partially repaired file. Do this by adding a special "[DA]FORK_ZAPPED"
inode health flag whenever repair zaps a fork, and sprinkling checks for
that flag into the various file operations for things that don't like
handling an unexpected zero-extents fork.
In practice xfs_scrub will scrub and fix the forks almost immediately
after zapping them, so the window is very small. However, if a crash or
unmount should occur, we can still detect these zapped inode forks by
looking for a zero-extents fork when data was expected.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Code in the next patch will assign the return value of XFS_DFORK_*PTR
macros to a struct pointer. gcc complains about casting char* strings
to struct pointers, so let's fix the macro's cast to void* to shut up
the warnings.
While we're at it, fix one of the scrub tests that uses PTR to use BOFF
instead for a simpler integer comparison, since other linters whine
about char* and void* comparisons.
Can't satisfy all these dman bots.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add this missing check that the superblock nrext64 flag is set if the
inode flag is set.
Fixes: 9b7d16e34b ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Inode resource usage is tracked in the quota metadata. Repairing a file
might change the resources used by that file, which means that we need
to attach dquots to the file that we're examining before accessing
anything in the file protected by the ILOCK.
However, there's a twist: a dquot cache miss requires the dquot to be
read in from the quota file, during which we drop the ILOCK on the file
being examined. This means that we *must* try to attach the dquots
before taking the ILOCK.
Therefore, dquots must be attached to files in the scrub setup function.
If doing so yields corruption errors (or unknown dquot errors), we
instead clear the quotachecked status, which will cause a quotacheck on
next mount. A future series will make this trigger live quotacheck.
While we're here, change the xrep_ino_dqattach function to use the
unlocked dqattach functions so that we avoid cycling the ILOCK if the
inode already has dquots attached. This makes the naming and locking
requirements consistent with the rest of the filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't compile the quota helper functions if quota isn't being built into
the XFS module.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use the rmapbt to find inode chunks, query the chunks to compute hole
and free masks, and with that information rebuild the inobt and finobt.
Refer to the case study in
Documentation/filesystems/xfs-online-fsck-design.rst for more details.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rebuild the free space btrees from the gaps in the rmap btree. Refer to
the case study in Documentation/filesystems/xfs-online-fsck-design.rst
for more details.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig complained about awkward code in the next two repair
patches such as:
sc->sm->sm_type = XFS_SCRUB_TYPE_BNOBT;
error = xchk_bnobt(sc);
This is a little silly, so let's export the xchk_{,i}allocbt functions
to the dispatch table in scrub.c directly and get rid of the helpers.
Originally I had planned each btree gets its own separate entry point,
but since repair doesn't work that way, it no longer makes sense to
complicate the call chain that way.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we've finished repairing an AG header, roll the scrub transaction.
This ensure that any failures caused by defer ops failing are captured
by the xrep_done tracepoint and that any stacktraces that occur will
point to the repair code that caused it, instead of xchk_teardown.
Going forward, repair functions should commit the transaction if they're
going to return success. Usually the space reaping functions that run
after a successful atomic commit of the new metadata will take care of
that for us.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move struct xagb_bitmap to its own pair of C and header files per
request of Christoph.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a version of the xbitmap that handles 32-bit integer intervals
and adapt the xfs_agblock_t bitmap to use it. This reduces the size of
the interval tree nodes from 48 to 36 bytes and enables us to use a more
efficient slab (:0000040 instead of :0000048) which allows us to pack
more nodes into a single slab page (102 vs 85).
As a side effect, the users of these bitmaps no longer have to convert
between u32 and u64 quantities just to use the bitmap; and the hairy
overflow checking code in xagb_bitmap_test goes away.
Later in this patchset we're going to add bitmaps for xfs_agino_t,
xfs_rgblock_t, and xfs_dablk_t, so the increase in code size (5622 vs.
9959 bytes) seems worth it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Constrain the number of dirty buffers that are locked by the btree
staging code at any given time by establishing a threshold at which we
put them all on the delwri queue and push them to disk. This limits
memory consumption while writing out new btrees.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we're performing a bulk load of a btree, move the code that
actually stores the btree record in the new btree block out of the
generic code and into the individual ->get_record implementations.
This is preparation for being able to store multiple records with a
single indirect call.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add some debug knobs so that we can control the leaf and node block
slack when rebuilding btrees.
For developers, it might be useful to construct btrees of various
heights by crafting a filesystem with a certain number of records and
then using repair+knobs to rebuild the index with a certain shape.
Practically speaking, you'd only ever do that for extreme stress
testing of the runtime code or the btree generator.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When constructing a new btree, xfs_btree_bload_node needs to read the
btree blocks for level N to compute the keyptrs for the blocks that will
be loaded into level N+1. The level N blocks must be formatted at that
point.
A subsequent patch will change the btree bulkloader to write new btree
blocks in 256K chunks to moderate memory consumption if the new btree is
very large. As a consequence of that, it's possible that the buffers
for lower level blocks might have been reclaimed by the time the node
builder comes back to the block.
Therefore, change xfs_btree_bload_node to read the lower level blocks
to handle the reclaimed buffer case. As a side effect, the read will
increase the LRU refs, which will bias towards keeping new btree buffers
in memory after the new btree commits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The btree bulkloading code calls xfs_buf_delwri_queue_here when it has
finished formatting a new btree block and wants to queue it to be
written to disk. Once the new btree root has been committed, the blocks
(and hence the buffers) will be accessible to the rest of the
filesystem. Mark each new buffer as DONE when adding it to the delwri
list so that the next btree traversal can skip reloading the contents
from disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While stress-testing online repair of btrees, I noticed periodic
assertion failures from the buffer cache about buffers with incorrect
DELWRI_Q state. Looking further, I observed this race between the AIL
trying to write out a btree block and repair zapping a btree block after
the fact:
AIL: Repair0:
pin buffer X
delwri_queue:
set DELWRI_Q
add to delwri list
stale buf X:
clear DELWRI_Q
does not clear b_list
free space X
commit
delwri_submit # oops
Worse yet, I discovered that running the same repair over and over in a
tight loop can result in a second race that cause data integrity
problems with the repair:
AIL: Repair0: Repair1:
pin buffer X
delwri_queue:
set DELWRI_Q
add to delwri list
stale buf X:
clear DELWRI_Q
does not clear b_list
free space X
commit
find free space X
get buffer
rewrite buffer
delwri_queue:
set DELWRI_Q
already on a list, do not add
commit
BAD: committed tree root before all blocks written
delwri_submit # too late now
I traced this to my own misunderstanding of how the delwri lists work,
particularly with regards to the AIL's buffer list. If a buffer is
logged and committed, the buffer can end up on that AIL buffer list. If
btree repairs are run twice in rapid succession, it's possible that the
first repair will invalidate the buffer and free it before the next time
the AIL wakes up. Marking the buffer stale clears DELWRI_Q from the
buffer state without removing the buffer from its delwri list. The
buffer doesn't know which list it's on, so it cannot know which lock to
take to protect the list for a removal.
If the second repair allocates the same block, it will then recycle the
buffer to start writing the new btree block. Meanwhile, if the AIL
wakes up and walks the buffer list, it will ignore the buffer because it
can't lock it, and go back to sleep.
When the second repair calls delwri_queue to put the buffer on the
list of buffers to write before committing the new btree, it will set
DELWRI_Q again, but since the buffer hasn't been removed from the AIL's
buffer list, it won't add it to the bulkload buffer's list.
This is incorrect, because the bulkload caller relies on delwri_submit
to ensure that all the buffers have been sent to disk /before/
committing the new btree root pointer. This ordering requirement is
required for data consistency.
Worse, the AIL won't clear DELWRI_Q from the buffer when it does finally
drop it, so the next thread to walk through the btree will trip over a
debug assertion on that flag.
To fix this, create a new function that waits for the buffer to be
removed from any other delwri lists before adding the buffer to the
caller's delwri list. By waiting for the buffer to clear both the
delwri list and any potential delwri wait list, we can be sure that
repair will initiate writes of all buffers and report all write errors
back to userspace instead of committing the new structure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Alexander Potapenko report that KMSAN was issuing these warnings:
kmalloc-ed xlog buffer of size 512 : ffff88802fc26200
kmalloc-ed xlog buffer of size 368 : ffff88802fc24a00
kmalloc-ed xlog buffer of size 648 : ffff88802b631000
kmalloc-ed xlog buffer of size 648 : ffff88802b632800
kmalloc-ed xlog buffer of size 648 : ffff88802b631c00
xlog_write_iovec: copying 12 bytes from ffff888017ddbbd8 to ffff88802c300400
xlog_write_iovec: copying 28 bytes from ffff888017ddbbe4 to ffff88802c30040c
xlog_write_iovec: copying 68 bytes from ffff88802fc26274 to ffff88802c300428
xlog_write_iovec: copying 188 bytes from ffff88802fc262bc to ffff88802c30046c
=====================================================
BUG: KMSAN: uninit-value in xlog_write_iovec fs/xfs/xfs_log.c:2227
BUG: KMSAN: uninit-value in xlog_write_full fs/xfs/xfs_log.c:2263
BUG: KMSAN: uninit-value in xlog_write+0x1fac/0x2600 fs/xfs/xfs_log.c:2532
xlog_write_iovec fs/xfs/xfs_log.c:2227
xlog_write_full fs/xfs/xfs_log.c:2263
xlog_write+0x1fac/0x2600 fs/xfs/xfs_log.c:2532
xlog_cil_write_chain fs/xfs/xfs_log_cil.c:918
xlog_cil_push_work+0x30f2/0x44e0 fs/xfs/xfs_log_cil.c:1263
process_one_work kernel/workqueue.c:2630
process_scheduled_works+0x1188/0x1e30 kernel/workqueue.c:2703
worker_thread+0xee5/0x14f0 kernel/workqueue.c:2784
kthread+0x391/0x500 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
Uninit was created at:
slab_post_alloc_hook+0x101/0xac0 mm/slab.h:768
slab_alloc_node mm/slub.c:3482
__kmem_cache_alloc_node+0x612/0xae0 mm/slub.c:3521
__do_kmalloc_node mm/slab_common.c:1006
__kmalloc+0x11a/0x410 mm/slab_common.c:1020
kmalloc ./include/linux/slab.h:604
xlog_kvmalloc fs/xfs/xfs_log_priv.h:704
xlog_cil_alloc_shadow_bufs fs/xfs/xfs_log_cil.c:343
xlog_cil_commit+0x487/0x4dc0 fs/xfs/xfs_log_cil.c:1574
__xfs_trans_commit+0x8df/0x1930 fs/xfs/xfs_trans.c:1017
xfs_trans_commit+0x30/0x40 fs/xfs/xfs_trans.c:1061
xfs_create+0x15af/0x2150 fs/xfs/xfs_inode.c:1076
xfs_generic_create+0x4cd/0x1550 fs/xfs/xfs_iops.c:199
xfs_vn_create+0x4a/0x60 fs/xfs/xfs_iops.c:275
lookup_open fs/namei.c:3477
open_last_lookups fs/namei.c:3546
path_openat+0x29ac/0x6180 fs/namei.c:3776
do_filp_open+0x24d/0x680 fs/namei.c:3809
do_sys_openat2+0x1bc/0x330 fs/open.c:1440
do_sys_open fs/open.c:1455
__do_sys_openat fs/open.c:1471
__se_sys_openat fs/open.c:1466
__x64_sys_openat+0x253/0x330 fs/open.c:1466
do_syscall_x64 arch/x86/entry/common.c:51
do_syscall_64+0x4f/0x140 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b arch/x86/entry/entry_64.S:120
Bytes 112-115 of 188 are uninitialized
Memory access of size 188 starts at ffff88802fc262bc
This is caused by the struct xfs_log_dinode not having the di_crc
field initialised. Log recovery never uses this field (it is only
present these days for on-disk format compatibility reasons) and so
it's value is never checked so nothing in XFS has caught this.
Further, none of the uninitialised memory access warning tools have
caught this (despite catching other uninit memory accesses in the
struct xfs_log_dinode back in 2017!) until recently. Alexander
annotated the XFS code to get the dump of the actual bytes that were
detected as uninitialised, and from that report it took me about 30s
to realise what the issue was.
The issue was introduced back in 2016 and every inode that is logged
fails to initialise this field. This is no actual bad behaviour
caused by this issue - I find it hard to even classify it as a
bug...
Reported-and-tested-by: Alexander Potapenko <glider@google.com>
Fixes: f8d55aa052 ("xfs: introduce inode log format object")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Overall, this function tries to find and invalidate all buffers for a
given extent of space on the data device. The inner for loop in this
function tries to find all xfs_bufs for a given daddr. The lengths of
all possible cached buffers range from 1 fsblock to the largest needed
to contain a 64k xattr value (~17fsb). The scan is capped to avoid
looking at anything buffer going past the given extent.
Unfortunately, the loop continuation test is wrong -- max_fsbs is the
largest size we want to scan, not one past that. Put another way, this
loop is actually 1-indexed, not 0-indexed. Therefore, the continuation
test should use <=, not <.
As a result, online repairs of btree blocks fails to stale any buffers
for btrees that are being torn down, which causes later assertions in
the buffer cache when another thread creates a different-sized buffer.
This happens in xfs/709 when allocating an inode cluster buffer:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 3346128 at fs/xfs/xfs_message.c:104 assfail+0x3a/0x40 [xfs]
CPU: 0 PID: 3346128 Comm: fsstress Not tainted 6.7.0-rc4-djwx #rc4
RIP: 0010:assfail+0x3a/0x40 [xfs]
Call Trace:
<TASK>
_xfs_buf_obj_cmp+0x4a/0x50
xfs_buf_get_map+0x191/0xba0
xfs_trans_get_buf_map+0x136/0x280
xfs_ialloc_inode_init+0x186/0x340
xfs_ialloc_ag_alloc+0x254/0x720
xfs_dialloc+0x21f/0x870
xfs_create_tmpfile+0x1a9/0x2f0
xfs_rename+0x369/0xfd0
xfs_vn_rename+0xfa/0x170
vfs_rename+0x5fb/0xc30
do_renameat2+0x52d/0x6e0
__x64_sys_renameat2+0x4b/0x60
do_syscall_64+0x3b/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
A later refactoring patch in the online repair series fixed this by
accident, which is why I didn't notice this until I started testing only
the patches that are likely to end up in 6.8.
Fixes: 1c7ce115e5 ("xfs: reap large AG metadata extents when possible")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Although xfs_growfs_data() doesn't call xfs_growfs_data_private()
if in->newblocks == mp->m_sb.sb_dblocks, xfs_growfs_data_private()
further massages the new block count so that we don't i.e. try
to create a too-small new AG.
This may lead to a delta of "0" in xfs_growfs_data_private(), so
we end up in the shrink case and emit the EXPERIMENTAL warning
even if we're not changing anything at all.
Fix this by returning straightaway if the block delta is zero.
(nb: in older kernels, the result of entering the shrink case
with delta == 0 may actually let an -ENOSPC escape to userspace,
which is confusing for users.)
Fixes: fb2fc17201 ("xfs: support shrinking unused space in the last AG")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Pass a pointer to the xfs_defer_op_type structure to xfs_defer_add and
remove the indirection through the xfs_defer_ops_type enum and a global
table of all possible operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_defer_start_recovery is only called from xlog_recover_intent_item,
and the callers of that all have the actual xfs_defer_ops_type operation
vector at hand. Pass that directly instead of looking it up from the
defer_op_types table.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The dfp_type field in struct xfs_defer_pending is only used to either
look up the operations associated with the pending word or in trace
points. Replace it with a direct pointer to the operations vector,
and store a pretty name in the vector for tracing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We'll reference it directly in xlog_recover_attri_commit_pass2, so move
it up a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Consolidate the xfs_attr_defer_* helpers into a single xfs_attr_defer_add
one that picks the right dela_state based on the passed in operation.
Also move to a single trace point as the actual operation is visible
through the flags in the delta_state passed to the trace point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While playing with growfs to create a 20TB realtime section on a
filesystem that didn't previously have an rt section, I noticed that
growfs would occasionally shut down the log due to a transaction
reservation overflow.
xfs_calc_growrtfree_reservation uses the current size of the realtime
summary file (m_rsumsize) to compute the transaction reservation for a
growrtfree transaction. The reservations are computed at mount time,
which means that m_rsumsize is zero when growfs starts "freeing" the new
realtime extents into the rt volume. As a result, the transaction is
undersized and fails.
Fix this by recomputing the transaction reservations every time we
change m_rsumsize.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patch series "workload-specific and memory pressure-driven zswap
writeback", v8.
There are currently several issues with zswap writeback:
1. There is only a single global LRU for zswap, making it impossible to
perform worload-specific shrinking - an memcg under memory pressure
cannot determine which pages in the pool it owns, and often ends up
writing pages from other memcgs. This issue has been previously
observed in practice and mitigated by simply disabling
memcg-initiated shrinking:
https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u
But this solution leaves a lot to be desired, as we still do not
have an avenue for an memcg to free up its own memory locked up in
the zswap pool.
2. We only shrink the zswap pool when the user-defined limit is hit.
This means that if we set the limit too high, cold data that are
unlikely to be used again will reside in the pool, wasting precious
memory. It is hard to predict how much zswap space will be needed
ahead of time, as this depends on the workload (specifically, on
factors such as memory access patterns and compressibility of the
memory pages).
This patch series solves these issues by separating the global zswap LRU
into per-memcg and per-NUMA LRUs, and performs workload-specific (i.e
memcg- and NUMA-aware) zswap writeback under memory pressure. The new
shrinker does not have any parameter that must be tuned by the user, and
can be opted in or out on a per-memcg basis.
As a proof of concept, we ran the following synthetic benchmark: build the
linux kernel in a memory-limited cgroup, and allocate some cold data in
tmpfs to see if the shrinker could write them out and improved the overall
performance. Depending on the amount of cold data generated, we observe
from 14% to 35% reduction in kernel CPU time used in the kernel builds.
This patch (of 6):
The interface of list_lru is based on the assumption that the list node
and the data it represents belong to the same allocated on the correct
node/memcg. While this assumption is valid for existing slab objects LRU
such as dentries and inodes, it is undocumented, and rather inflexible for
certain potential list_lru users (such as the upcoming zswap shrinker and
the THP shrinker). It has caused us a lot of issues during our
development.
This patch changes list_lru interface so that the caller must explicitly
specify numa node and memcg when adding and removing objects. The old
list_lru_add() and list_lru_del() are renamed to list_lru_add_obj() and
list_lru_del_obj(), respectively.
It also extends the list_lru API with a new function, list_lru_putback,
which undoes a previous list_lru_isolate call. Unlike list_lru_add, it
does not increment the LRU node count (as list_lru_isolate does not
decrement the node count). list_lru_putback also allows for explicit
memcg and NUMA node selection.
Link: https://lkml.kernel.org/r/20231130194023.4102148-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There were already assertions that we were not passing a tail page to
error_remove_page(), so make the compiler enforce that by converting
everything to pass and use a folio.
Link: https://lkml.kernel.org/r/20231117161447.2461643-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move xfs_ondisk.h to libxfs so that we can do the struct sanity checks
in userspace libxfs as well. This should allow us to retire the
somewhat fragile xfs/122 test on xfstests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the compiler-provided static_assert built-in from C11 instead of
the kernel-specific BUILD_BUG_ON_MSG for the structure size and offset
checks in xfs_ondisk. This not only gives slightly nicer error messages
in case things go south, but can also be trivially used as-is in
userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This patch does not modify logic.
xfs_da_buf_copy() will copy one block from src xfs_buf to
dst xfs_buf, and update the block metadata in dst directly.
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_da3_swap_lastblock() copy the last block content to the dead block,
but do not update the metadata in it. We need update some metadata
for some kinds of type block, such as dir3 leafn block records its
blkno, we shall update it to the dead block blkno. Otherwise,
before write the xfs_buf to disk, the verify_write() will fail in
blk_hdr->blkno != xfs_buf->b_bn, then xfs will be shutdown.
We will get this warning:
XFS (dm-0): Metadata corruption detected at xfs_dir3_leaf_verify+0xa8/0xe0 [xfs], xfs_dir3_leafn block 0x178
XFS (dm-0): Unmount and run xfs_repair
XFS (dm-0): First 128 bytes of corrupted metadata buffer:
00000000e80f1917: 00 80 00 0b 00 80 00 07 3d ff 00 00 00 00 00 00 ........=.......
000000009604c005: 00 00 00 00 00 00 01 a0 00 00 00 00 00 00 00 00 ................
000000006b6fb2bf: e4 44 e3 97 b5 64 44 41 8b 84 60 0e 50 43 d9 bf .D...dDA..`.PC..
00000000678978a2: 00 00 00 00 00 00 00 83 01 73 00 93 00 00 00 00 .........s......
00000000b28b247c: 99 29 1d 38 00 00 00 00 99 29 1d 40 00 00 00 00 .).8.....).@....
000000002b2a662c: 99 29 1d 48 00 00 00 00 99 49 11 00 00 00 00 00 .).H.....I......
00000000ea2ffbb8: 99 49 11 08 00 00 45 25 99 49 11 10 00 00 48 fe .I....E%.I....H.
0000000069e86440: 99 49 11 18 00 00 4c 6b 99 49 11 20 00 00 4d 97 .I....Lk.I. ..M.
XFS (dm-0): xfs_do_force_shutdown(0x8) called from line 1423 of file fs/xfs/xfs_buf.c. Return address = 00000000c0ff63c1
XFS (dm-0): Corruption of in-memory data detected. Shutting down filesystem
XFS (dm-0): Please umount the filesystem and rectify the problem(s)
>From the log above, we know xfs_buf->b_no is 0x178, but the block's hdr record
its blkno is 0x1a0.
Fixes: 24df33b45e ("xfs: add CRC checking to dir2 leaf blocks")
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the case of returning -ENOSPC, ensure logflagsp is initialized by 0.
Otherwise the caller __xfs_bunmapi will set uninitialized illegal
tmp_logflags value into xfs log, which might cause unpredictable error
in the log recovery procedure.
Also, remove the flags variable and set the *logflagsp directly, so that
the code should be more robust in the long run.
Fixes: 1b24b633aa ("xfs: move some more code into xfs_bmap_del_extent_real")
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use struct types instead of typedefs so that the header can be included
with pulling in the headers that define the typedefs, and remove the
pointless externs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reserve_blocks has a very odd interface that can only be explained
by it directly deriving from the IRIX fcntl handler back in the day.
Split reporting out the reserved blocks out of xfs_reserve_blocks into
the only caller that cares. This means that the value reported from
XFS_IOC_SET_RESBLKS isn't atomically sampled in the same critical
section as when it was set anymore, but as the values could change
right after setting them anyway that does not matter. It does
provide atomic sampling of both values for XFS_IOC_GET_RESBLKS now,
though.
Also pass a normal scalar integer value for the requested value instead
of the pointless pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Split XFS_IOC_FSCOUNTS out of the main xfs_file_ioctl function, and
merge the xfs_fs_counts helper into the ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The XFS_IOC_GET_RESBLKS and XFS_IOC_SET_RESBLKS already share a fair
amount of code, and will share even more soon. Move the logic for both
of them out of the main xfs_file_ioctl function into a
xfs_ioctl_getset_resblocks helper to share the code and prepare for
additional changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now, if we suddenly remove a PMEM device(by calling unbind) which
contains FSDAX while programs are still accessing data in this device,
e.g.:
```
$FSSTRESS_PROG -d $SCRATCH_MNT -n 99999 -p 4 &
# $FSX_PROG -N 1000000 -o 8192 -l 500000 $SCRATCH_MNT/t001 &
echo "pfn1.1" > /sys/bus/nd/drivers/nd_pmem/unbind
```
it could come into an unacceptable state:
1. device has gone but mount point still exists, and umount will fail
with "target is busy"
2. programs will hang and cannot be killed
3. may crash with NULL pointer dereference
To fix this, we introduce a MF_MEM_PRE_REMOVE flag to let it know that we
are going to remove the whole device, and make sure all related processes
could be notified so that they could end up gracefully.
This patch is inspired by Dan's "mm, dax, pmem: Introduce
dev_pagemap_failure()"[1]. With the help of dax_holder and
->notify_failure() mechanism, the pmem driver is able to ask filesystem
on it to unmap all files in use, and notify processes who are using
those files.
Call trace:
trigger unbind
-> unbind_store()
-> ... (skip)
-> devres_release_all()
-> kill_dax()
-> dax_holder_notify_failure(dax_dev, 0, U64_MAX, MF_MEM_PRE_REMOVE)
-> xfs_dax_notify_failure()
`-> freeze_super() // freeze (kernel call)
`-> do xfs rmap
` -> mf_dax_kill_procs()
` -> collect_procs_fsdax() // all associated processes
` -> unmap_and_kill()
` -> invalidate_inode_pages2_range() // drop file's cache
`-> thaw_super() // thaw (both kernel & user call)
Introduce MF_MEM_PRE_REMOVE to let filesystem know this is a remove
event. Use the exclusive freeze/thaw[2] to lock the filesystem to prevent
new dax mapping from being created. Do not shutdown filesystem directly
if configuration is not supported, or if failure range includes metadata
area. Make sure all files and processes(not only the current progress)
are handled correctly. Also drop the cache of associated files before
pmem is removed.
[1]: https://lore.kernel.org/linux-mm/161604050314.1463742.14151665140035795571.stgit@dwillia2-desk3.amr.corp.intel.com/
[2]: https://lore.kernel.org/linux-xfs/169116275623.3187159.16862410128731457358.stg-ugh@frogsfrogsfrogs/
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Introduce the concept of a defer ops barrier to separate consecutively
queued pending work items of the same type. With a barrier in place,
the two work items will be tracked separately, and receive separate log
intent items. The goal here is to prevent reaping of old metadata
blocks from creating unnecessarily huge EFIs that could then run the
risk of overflowing the scrub transaction.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We need to log EFIs for every extent that we allocate for the purpose of
staging a new btree so that if we fail then the blocks will be freed
during log recovery. Use the autoreaping mechanism provided by the
previous patch to attach paused freeing work to the scrub transaction.
We can then mark the EFIs stale if we decide to commit the new btree, or
we can unpause the EFIs if we decide to abort the repair.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new xrep_newbt structure to encapsulate a fake root for
creating a staged btree cursor as well as to track all the blocks that
we need to reserve in order to build that btree.
As for the particular choice of lowspace thresholds and btree block
slack factors -- at this point one could say that the thresholds in
online repair come from bulkload_estimate_ag_slack in xfs_repair[1].
But that's not the entire story, since the offline btree rebuilding
code in xfs_repair was merged as a retroport of the online btree code
in this patchset!
Before xfs_btree_staging.[ch] came along, xfs_repair determined the
slack factor (aka the number of slots to leave unfilled in each new
btree block) via open-coded logic in repair/phase5.c[2]. At that point
the slack factors were arbitrary quantities per btree. The rmapbt
automatically left 10 slots free; everything else left zero.
That had a noticeable effect on performance straight after mounting
because adding records to /any/ btree would result in splits. A few
years ago when this patch was first written, Dave and I decided that
repair should generate btree blocks that were 75% full unless space was
tight, in which case it should try to fill the blocks to nearly full.
We defined tight as ~10% free to avoid repair failures but settled on
3/32 (~9%) to avoid div64.
IOWs, we mostly pulled the thresholds out of thin air. We've been
QAing with those geometry numbers ever since. ;)
Link: https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/tree/repair/bulkload.c?h=v6.5.0#n114
Link: https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/tree/repair/phase5.c?h=v4.19.0#n1349
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Remove these unused fields since nobody uses them. They should have
been removed years ago in a different cleanup series from Christoph
Hellwig.
Fixes: daf83964a3 ("xfs: move the per-fork nextents fields into struct xfs_ifork")
Fixes: f7e67b20ec ("xfs: move the fork format fields into struct xfs_ifork")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
As mentioned in the previous commit, online repair wants to allocate
space to write out a new metadata structure, and it also wants to hedge
against system crashes during repairs by logging (and later cancelling)
EFIs to free the space if we crash before committing the new data
structure.
Therefore, create a trio of functions to schedule automatic reaping of
freshly allocated unwritten space. xfs_alloc_schedule_autoreap creates
a paused EFI representing the space we just allocated. Once the
allocations are made and the autoreaps scheduled, we can start writing
to disk.
If the writes succeed, xfs_alloc_cancel_autoreap marks the EFI work
items as stale and unpauses the pending deferred work item. Assuming
that's done in the same transaction that commits the new structure into
the filesystem, we guarantee that either the new object is fully
visible, or that all the space gets reclaimed.
If the writes succeed but only part of an extent was used, repair must
call the same _cancel_autoreap function to kill the first EFI and then
log a new EFI to free the unused space. The first EFI is already
committed, so it cannot be changed.
For full extents that aren't used, xfs_alloc_commit_autoreap will
unpause the EFI, which results in the space being freed during the next
_defer_finish cycle.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_free_extent_later is a trivial helper, so remove it to reduce the
amount of thinking required to understand the deferred freeing
interface. This will make it easier to introduce automatic reaping of
speculative allocations in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Traditionally, all pending deferred work attached to a transaction is
finished when one of the xfs_defer_finish* functions is called.
However, online repair wants to be able to allocate space for a new data
structure, format a new metadata structure into the allocated space, and
commit that into the filesystem.
As a hedge against system crashes during repairs, we also want to log
some EFI items for the allocated space speculatively, and cancel them if
we elect to commit the new data structure.
Therefore, introduce the idea of pausing a pending deferred work item.
Log intent items are still created for paused items and relogged as
necessary. However, paused items are pushed onto a side list before we
start calling ->finish_item, and the whole list is reattach to the
transaction afterwards. New work items are never attached to paused
pending items.
Modify xfs_defer_cancel to clean up pending deferred work items holding
a log intent item but not a log intent done item, since that is now
possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When someone tries to add a deferred work item to xfs_defer_add, it will
try to attach the work item to the most recently added xfs_defer_pending
object attached to the transaction. However, it doesn't check if the
pending object has a log intent item attached to it. This is incorrect
behavior because we cannot add more work to an object that has already
been committed to the ondisk log.
Therefore, change the behavior not to append to pending items with a non
null dfp_intent. In practice this has not been an issue because the
only way xfs_defer_add gets called after log intent items have been
committed is from the defer ops ->finish_item functions themselves, and
the @dop_pending isolation in xfs_defer_finish_noroll protects the
pending items that have already been logged.
However, the next patch will add the ability to pause a deferred extent
free object during online btree rebuilding, and any new extfree work
items need to have their own pending event.
While we're at it, hoist the predicate to its own static inline function
for readability.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When scrub is trying to iget an inode, ensure that it won't end up
deadlocked on a cycle in the inode btree by using an empty transaction
to store all the buffers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Extended attribute updates use the deferred work machinery to manage
state across a chain of smaller transactions. All previous deferred
work users have employed log intent items and log done items to manage
restarting of interrupted operations, which means that ->create_intent
sets dfp_intent to a log intent item and ->create_done uses that item to
create a log intent done item.
However, xattrs have used the INCOMPLETE flag to deal with the lack of
recovery support for an interrupted transaction chain. Log items are
optional if the xattr update caller didn't set XFS_DA_OP_LOGGED to
require a restartable sequence.
In other words, ->create_intent can return NULL to say that there's no
log intent item. If that's the case, no log intent done item should be
created. Clean up xfs_defer_create_done not to do this, so that the
->create_done functions don't have to check for non-null dfp_intent
themselves.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Christoph requested a blurb somewhere explaining exactly what LARP
means. I don't know of a good place other than the source code (debug
knobs aren't covered in Documentation/), so here it is.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't allow realtime volumes that are less than one rt extent long.
This has been broken across 4 LTS kernels with nobody noticing, so let's
just disable it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
It's quite reasonable that some customer somewhere will want to
configure a realtime volume with more than 2^32 extents. If they try to
do this, the highbit32() call will truncate the upper bits of the
xfs_rtbxlen_t and produce the wrong value for rextslog. This in turn
causes the rsumlevels to be wrong, which results in a realtime summary
file that is the wrong length. Fix that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's a weird discrepancy in xfsprogs dating back to the creation of
the Linux port -- if there are zero rt extents, mkfs will set
sb_rextents and sb_rextslog both to zero:
sbp->sb_rextslog =
(uint8_t)(rtextents ?
libxfs_highbit32((unsigned int)rtextents) : 0);
However, that's not the check that xfs_repair uses for nonzero rtblocks:
if (sb->sb_rextslog !=
libxfs_highbit32((unsigned int)sb->sb_rextents))
The difference here is that xfs_highbit32 returns -1 if its argument is
zero. Unfortunately, this means that in the weird corner case of a
realtime volume shorter than 1 rt extent, xfs_repair will immediately
flag a freshly formatted filesystem as corrupt. Because mkfs has been
writing ondisk artifacts like this for decades, we have to accept that
as "correct". TBH, zero rextslog for zero rtextents makes more sense to
me anyway.
Regrettably, the superblock verifier checks created in commit copied
xfs_repair even though mkfs has been writing out such filesystems for
ages. Fix the superblock verifier to accept what mkfs spits out; the
userspace version of this patch will have to fix xfs_repair as well.
Note that the new helper leaves the zeroday bug where the upper 32 bits
of sb_rextents is ripped off and fed to highbit32. This leads to a
seriously undersized rt summary file, which immediately breaks mkfs:
$ hugedisk.sh foo /dev/sdc $(( 0x100000080 * 4096))B
$ /sbin/mkfs.xfs -f /dev/sda -m rmapbt=0,reflink=0 -r rtdev=/dev/mapper/foo
meta-data=/dev/sda isize=512 agcount=4, agsize=1298176 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=0 bigtime=1 inobtcount=1 nrext64=1
data = bsize=4096 blocks=5192704, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =/dev/mapper/foo extsz=4096 blocks=4294967424, rtextents=4294967424
Discarding blocks...Done.
mkfs.xfs: Error initializing the realtime space [117 - Structure needs cleaning]
The next patch will drop support for rt volumes with fewer than 1 or
more than 2^32-1 rt extents, since they've clearly been broken forever.
Fixes: f8e566c0f5 ("xfs: validate the realtime geometry in xfs_validate_sb_common")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only log items that need relogging are the ones created for deferred
work operations, and the only part of the code base that relogs log
items is the deferred work machinery. Move the function pointers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the meat of the ->create_done function helpers into ->create_done
to reduce the amount of boilerplate.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist this dirty flag setting to the ->iop_relog callsite to reduce
boilerplate.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we have a helper to handle creating a log intent done item and
updating all the necessary state flags, use it to reduce boilerplate in
the ->iop_relog implementations.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the dirty flag setting code out of each ->create_intent
implementation up to the callsite to reduce boilerplate further.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Each log item's ->finish_item function sets up a small amount of state
and calls another function to do the work. Collapse that other function
into ->finish_item to reduce the call stack height.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Each log intent item's ->finish_item call chain inevitably includes some
code to set the dirty flag of the transaction. If there's an associated
log intent done item, it also sets the item's dirty flag and the
transaction's INTENT_DONE flag. This is repeated throughout the
codebase.
Reduce the LOC by moving all that to xfs_defer_finish_one.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS_TRANS_HAS_INTENT_DONE is a flag to the CIL that we've added a log
intent done item to the transaction. This enables an optimization
wherein we avoid writing out log intent and log intent done items if
they would have ended up in the same checkpoint. This reduces writes to
the ondisk log and speeds up recovery as a result.
However, callers can use the defer ops machinery to modify xattrs
without using the log items. In this situation, there won't be an
intent done item, so we do not need to set the flag.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Finish off the series by moving the intent item recovery function
pointer to the xfs_defer_op_type struct, since this is really a deferred
work function now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Get rid of the open-coded calls to xfs_defer_finish_one. This also
means that the recovery transaction takes care of cleaning up the dfp,
and we have solved (I hope) all the ownership issues in recovery.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If xfs_attri_item_recover receives a corruption error when it tries to
finish a recovered log intent item, it should dump the log item for
debugging, just like all the other log intent items.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Recreate work items for each xfs_defer_pending object when we are
recovering intent items.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we pass the xfs_defer_pending object into the intent item
recovery functions, we know exactly when ownership of the sole refcount
passes from the recovery context to the intent done item. At that
point, we need to null out dfp_intent so that the recovery mechanism
won't release it. This should fix the UAF problem reported by Long Li.
Note that we still want to recreate the full deferred work state. That
will be addressed in the next patches.
Fixes: 2e76f188fd ("xfs: cancel intents immediately if process_intents fails")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that log intent item recovery recreates the xfs_defer_pending state,
we should pass that into the ->iop_recover routines so that the intent
item can finish the recreation work.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
One thing I never quite got around to doing is porting the log intent
item recovery code to reconstruct the deferred pending work state. As a
result, each intent item open codes xfs_defer_finish_one in its recovery
method, because that's what the EFI code did before xfs_defer.c even
existed.
This is a gross thing to have left unfixed -- if an EFI cannot proceed
due to busy extents, we end up creating separate new EFIs for each
unfinished work item, which is a change in behavior from what runtime
would have done.
Worse yet, Long Li pointed out that there's a UAF in the recovery code.
The ->commit_pass2 function adds the intent item to the AIL and drops
the refcount. The one remaining refcount is now owned by the recovery
mechanism (aka the log intent items in the AIL) with the intent of
giving the refcount to the intent done item in the ->iop_recover
function.
However, if something fails later in recovery, xlog_recover_finish will
walk the recovered intent items in the AIL and release them. If the CIL
hasn't been pushed before that point (which is possible since we don't
force the log until later) then the intent done release will try to free
its associated intent, which has already been freed.
This patch starts to address this mess by having the ->commit_pass2
functions recreate the xfs_defer_pending state. The next few patches
will fix the recovery functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If recovery finds an xattr log intent item calling for the removal of an
attribute and the file doesn't even have an attr fork, we know that the
removal is trivially complete. However, we can't just exit the recovery
function without doing something about the recovered log intent item --
it's still on the AIL, and not logging an attrd item means it stays
there forever.
This has likely not been seen in practice because few people use LARP
and the runtime code won't log the attri for a no-attrfork removexattr
operation. But let's fix this anyway.
Also we shouldn't really be testing the attr fork presence until we've
taken the ILOCK, though this doesn't matter much in recovery, which is
single threaded.
Fixes: fdaf1bb3ca ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
* Validate quota records recovered from the log before writing them to the
disk.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZV5ElQAKCRAH7y4RirJu
9DCnAP0bth5eVyCxq9teNsql8sDnWzYtgdp3Sgo6LGjKcbUigAEAldS0EW86fva6
X60DComoQfxT4zMKR6K6h7VvhcF3dwc=
=PQ3p
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZWBq0gAKCRCRxhvAZXjc
ot4EAP48O5ExMtQ3/AIkNDo+/9/Iz4g7bE1HYmdyiMPO3Ou/uwEAySwBXRJrFAsS
9omvkEdqrfyguW0xgoYwcxBdATVHnAE=
=ScR3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
When we're recovering ondisk quota records from the log, we need to
validate the recovered buffer contents before writing them to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Since the introduction of xfs_dqblk in V5, xfs really ought to find the
dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot
pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls
and do the type checking in the correct order.
Note that this has made no practical difference since the start of the
xfs_disk_dquot is coincident with the start of the xfs_dqblk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Update the per-folio stable writes flag dependening on which device an
inode resides on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Introduce a local boolean variable if FS_XFLAG_REALTIME to make the
checks for it more obvious, and de-densify a few of the conditionals
using it to make them more readable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Ask block layer to not allow other writers to open block devices used
for xfs log and realtime devices.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-6-jack@suse.cz
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We removed all codepaths where s_umount is taken beneath open_mutex and
bd_holder_lock so don't make things more complicated than they need to
be and hold s_umount over block device opening.
Link: https://lore.kernel.org/r/20231024-vfs-super-rework-v1-2-37a8aa697148@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:
* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()
Also document the return code.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Because on v3 inodes, di_flushiter doesn't exist. It overlaps with
zero padding in the inode, except when NREXT64=1 configurations are
in use and the zero padding is no longer padding but holds the 64
bit extent counter.
This manifests obviously on big endian platforms (e.g. s390) because
the log dinode is in host order and the overlap is the LSBs of the
extent count field. It is not noticed on little endian machines
because the overlap is at the MSB end of the extent count field and
we need to get more than 2^^48 extents in the inode before it
manifests. i.e. the heat death of the universe will occur before we
see the problem in little endian machines.
This is a zero-day issue for NREXT64=1 configuraitons on big endian
machines. Fix it by only clearing di_flushiter on v2 inodes during
recovery.
Fixes: 9b7d16e34b ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
cc: stable@kernel.org # 5.19+
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Discovered when trying to track down a weird recovery corruption
issue that wasn't detected at recovery time.
The specific corruption was a zero extent count field when big
extent counts are in use, and it turns out the dinode verifier
doesn't detect that specific corruption case, either. So fix it too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Commit 57c0f4a8ea attempted to fix the select in the kconfig entry
XFS_ONLINE_SCRUB_STATS by selecting XFS_DEBUG, but the original
intention was to select DEBUG_FS, since the feature relies on debugfs to
export the related scrub statistics.
Fixes: 57c0f4a8ea ("xfs: fix select in config XFS_ONLINE_SCRUB_STATS")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We've been seeing XFS errors like the following:
XFS: Internal error i != 1 at line 3526 of file fs/xfs/libxfs/xfs_btree.c. Caller xfs_btree_insert+0x1ec/0x280
...
Call Trace:
xfs_corruption_error+0x94/0xa0
xfs_btree_insert+0x221/0x280
xfs_alloc_fixup_trees+0x104/0x3e0
xfs_alloc_ag_vextent_size+0x667/0x820
xfs_alloc_fix_freelist+0x5d9/0x750
xfs_free_extent_fix_freelist+0x65/0xa0
__xfs_free_extent+0x57/0x180
...
This is the XFS_IS_CORRUPT() check in xfs_btree_insert() when
xfs_btree_insrec() fails.
After converting this into a panic and dissecting the core dump, I found
that xfs_btree_insrec() is failing because it's trying to split a leaf
node in the cntbt when the AG free list is empty. In particular, it's
failing to get a block from the AGFL _while trying to refill the AGFL_.
If a single operation splits every level of the bnobt and the cntbt (and
the rmapbt if it is enabled) at once, the free list will be empty. Then,
when the next operation tries to refill the free list, it allocates
space. If the allocation does not use a full extent, it will need to
insert records for the remaining space in the bnobt and cntbt. And if
those new records go in full leaves, the leaves (and potentially more
nodes up to the old root) need to be split.
Fix it by accounting for the additional splits that may be required to
refill the free list in the calculation for the minimum free list size.
P.S. As far as I can tell, this bug has existed for a long time -- maybe
back to xfs-history commit afdf80ae7405 ("Add XFS_AG_MAXLEVELS macros
...") in April 1994! It requires a very unlucky sequence of events, and
in fact we didn't hit it until a particular sparse mmap workload updated
from 5.12 to 5.19. But this bug existed in 5.12, so it must've been
exposed by some other change in allocation or writeback patterns. It's
also much less likely to be hit with the rmapbt enabled, since that
increases the minimum free list size and is unlikely to split at the
same time as the bnobt and cntbt.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We flush the data device cache before we issue external log IO. If
the flush fails, we shut down the log immediately and return. However,
the iclog->ic_sema is left in a decremented state so let's add an up().
Prior to this patch, xfs/438 would fail consistently when running with
an external log device:
sync
-> xfs_log_force
-> xlog_write_iclog
-> down(&iclog->ic_sema)
-> blkdev_issue_flush (fail causes us to intiate shutdown)
-> xlog_force_shutdown
-> return
unmount
-> xfs_log_umount
-> xlog_wait_iclog_completion
-> down(&iclog->ic_sema) --------> HANG
There is a second early return / shutdown. Make sure the up() happens
for it as well. Also make sure we cleanup the iclog state,
xlog_state_done_syncing, before dropping the iclog lock.
Fixes: b5d721eaae ("xfs: external logs need to flush data device")
Fixes: 842a42d126 ("xfs: shutdown on failure to add page to log bio")
Fixes: 7d839e325a ("xfs: check return codes when flushing block devices")
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reflink_end_cow_extent looks up the COW extent and the data fork
extent at offset_fsb, and then proceeds to remap the common subset
between the two.
It does however not limit the remapped extent to the passed in
[*offset_fsbm end_fsb] range and thus potentially remaps more blocks than
the one handled by the current I/O completion. This means that with
sufficiently large data and COW extents we could be remapping COW fork
mappings that have not been written to, leading to a stale data exposure
on a powerfail event.
We use to have a xfs_trim_range to make the remap fit the I/O completion
range, but that got (apparently accidentally) removed in commit
df2fd88f8a ("xfs: rewrite xfs_reflink_end_cow to use intents").
Note that I've only found this by code inspection, and a test case would
probably require very specific delay and error injection.
Fixes: df2fd88f8a ("xfs: rewrite xfs_reflink_end_cow to use intents")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When recovering intents, we capture newly created intent items as part of
committing recovered intent items. If intent recovery fails at a later
point, we forget to remove those newly created intent items from the AIL
and hang:
[root@localhost ~]# cat /proc/539/stack
[<0>] xfs_ail_push_all_sync+0x174/0x230
[<0>] xfs_unmount_flush_inodes+0x8d/0xd0
[<0>] xfs_mountfs+0x15f7/0x1e70
[<0>] xfs_fs_fill_super+0x10ec/0x1b20
[<0>] get_tree_bdev+0x3c8/0x730
[<0>] vfs_get_tree+0x89/0x2c0
[<0>] path_mount+0xecf/0x1800
[<0>] do_mount+0xf3/0x110
[<0>] __x64_sys_mount+0x154/0x1f0
[<0>] do_syscall_64+0x39/0x80
[<0>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
When newly created intent items fail to commit via transaction, intent
recovery hasn't created done items for these newly created intent items,
so the capture structure is the sole owner of the captured intent items.
We must release them explicitly or else they leak:
unreferenced object 0xffff888016719108 (size 432):
comm "mount", pid 529, jiffies 4294706839 (age 144.463s)
hex dump (first 32 bytes):
08 91 71 16 80 88 ff ff 08 91 71 16 80 88 ff ff ..q.......q.....
18 91 71 16 80 88 ff ff 18 91 71 16 80 88 ff ff ..q.......q.....
backtrace:
[<ffffffff8230c68f>] xfs_efi_init+0x18f/0x1d0
[<ffffffff8230c720>] xfs_extent_free_create_intent+0x50/0x150
[<ffffffff821b671a>] xfs_defer_create_intents+0x16a/0x340
[<ffffffff821bac3e>] xfs_defer_ops_capture_and_commit+0x8e/0xad0
[<ffffffff82322bb9>] xfs_cui_item_recover+0x819/0x980
[<ffffffff823289b6>] xlog_recover_process_intents+0x246/0xb70
[<ffffffff8233249a>] xlog_recover_finish+0x8a/0x9a0
[<ffffffff822eeafb>] xfs_log_mount_finish+0x2bb/0x4a0
[<ffffffff822c0f4f>] xfs_mountfs+0x14bf/0x1e70
[<ffffffff822d1f80>] xfs_fs_fill_super+0x10d0/0x1b20
[<ffffffff81a21fa2>] get_tree_bdev+0x3d2/0x6d0
[<ffffffff81a1ee09>] vfs_get_tree+0x89/0x2c0
[<ffffffff81a9f35f>] path_mount+0xecf/0x1800
[<ffffffff81a9fd83>] do_mount+0xf3/0x110
[<ffffffff81aa00e4>] __x64_sys_mount+0x154/0x1f0
[<ffffffff83968739>] do_syscall_64+0x39/0x80
Fix the problem above by abort intent items that don't have a done item
when recovery intents fail.
Fixes: e6fff81e48 ("xfs: proper replay of deferred ops queued during log recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Factor out xfs_defer_pending_abort() from xfs_defer_trans_abort(), which
not use transaction parameter, so it can be used after the transaction
life cycle.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* Realtime device subsystem
- Cleanup usage of xfs_rtblock_t and xfs_fsblock_t data types.
- Replace open coded conversions between rt blocks and rt extents with
calls to static inline helpers.
- Replace open coded realtime geometry compuation and macros with helper
functions.
- CPU usage optimizations for realtime allocator.
- Misc. Bug fixes associated with Realtime device.
* Allow read operations to execute while an FICLONE ioctl is being serviced.
* Misc. bug fixes
- Alert user when xfs_droplink() encounters an inode with a link count of zero.
- Handle the case where the allocator could return zero extents when
servicing an fallocate request.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZUEvIgAKCRAH7y4RirJu
9JnQAQCtnQAhZHbh9U2BNJI4hrpNm4Mh54DVlZvPFHW1N96AUAEA0Hnic/Zusrfc
9aaHQbzs4qGSZ5UJWOU6GxcWob/tggs=
=Ay05
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
- Realtime device subsystem:
- Cleanup usage of xfs_rtblock_t and xfs_fsblock_t data types
- Replace open coded conversions between rt blocks and rt extents
with calls to static inline helpers
- Replace open coded realtime geometry compuation and macros with
helper functions
- CPU usage optimizations for realtime allocator
- Misc bug fixes associated with Realtime device
- Allow read operations to execute while an FICLONE ioctl is being
serviced
- Misc bug fixes:
- Alert user when xfs_droplink() encounters an inode with a link
count of zero
- Handle the case where the allocator could return zero extents when
servicing an fallocate request
* tag 'xfs-6.7-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (40 commits)
xfs: allow read IO and FICLONE to run concurrently
xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space
xfs: introduce protection for drop nlink
xfs: don't look for end of extent further than necessary in xfs_rtallocate_extent_near()
xfs: don't try redundant allocations in xfs_rtallocate_extent_near()
xfs: limit maxlen based on available space in xfs_rtallocate_extent_near()
xfs: return maximum free size from xfs_rtany_summary()
xfs: invert the realtime summary cache
xfs: simplify rt bitmap/summary block accessor functions
xfs: simplify xfs_rtbuf_get calling conventions
xfs: cache last bitmap block in realtime allocator
xfs: use accessor functions for summary info words
xfs: consolidate realtime allocation arguments
xfs: create helpers for rtsummary block/wordcount computations
xfs: use accessor functions for bitmap words
xfs: create helpers for rtbitmap block/wordcount computations
xfs: create a helper to handle logging parts of rt bitmap/summary blocks
xfs: convert rt summary macros to helpers
xfs: convert open-coded xfs_rtword_t pointer accesses to helper
xfs: remove XFS_BLOCKWSIZE and XFS_BLOCKWMASK macros
...
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will
be maintained as an LTS kernel.
The architecture specific system call tables are updated for
the added map_shadow_stack() syscall and to remove references
to the long-gone sys_lookup_dcookie() syscall.
-----BEGIN PGP SIGNATURE-----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=H1vH
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppYgAKCRCRxhvAZXjc
okIHAP9anLz1QDyMLH12ASuHjgBc0Of3jcB6NB97IWGpL4O21gEA46ohaD+vcJuC
YkBLU3lXqQ87nfu28ExFAzh10hG2jwM=
=m4pB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTppWAAKCRCRxhvAZXjc
okB2AP4jjoRErJBwj245OIDJqzoj4m4UVOVd0MH2AkiSpANczwD/TToChdpusY2y
qAYg1fQoGMbDVlb7Txaj9qI9ieCf9w0=
=2PXg
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
Convert xfs to use bdev_open_by_path() and pass the handle around.
CC: "Darrick J. Wong" <djwong@kernel.org>
CC: linux-xfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-28-jack@suse.cz
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
One of our VM cluster management products needs to snapshot KVM image
files so that they can be restored in case of failure. Snapshotting is
done by redirecting VM disk writes to a sidecar file and using reflink
on the disk image, specifically the FICLONE ioctl as used by
"cp --reflink". Reflink locks the source and destination files while it
operates, which means that reads from the main vm disk image are blocked,
causing the vm to stall. When an image file is heavily fragmented, the
copy process could take several minutes. Some of the vm image files have
50-100 million extent records, and duplicating that much metadata locks
the file for 30 minutes or more. Having activities suspended for such
a long time in a cluster node could result in node eviction.
Clone operations and read IO do not change any data in the source file,
so they should be able to run concurrently. Demote the exclusive locks
taken by FICLONE to shared locks to allow reads while cloning. While a
clone is in progress, writes will take the IOLOCK_EXCL, so they block
until the clone completes.
Link: https://lore.kernel.org/linux-xfs/8911B94D-DD29-4D6E-B5BC-32EAF1866245@oracle.com/
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If xfs_bmapi_write finds a delalloc extent at the requested range, it
tries to convert the entire delalloc extent to a real allocation.
But if the allocator cannot find a single free extent large enough to
cover the start block of the requested range, xfs_bmapi_write will
return 0 but leave *nimaps set to 0.
In that case we simply need to keep looping with the same startoffset_fsb
so that one of the following allocations will eventually reach the
requested range.
Note that this could affect any caller of xfs_bmapi_write that covers
an existing delayed allocation. As far as I can tell we do not have
any other such caller, though - the regular writeback path uses
xfs_bmapi_convert_delalloc to convert delayed allocations to real ones,
and direct I/O invalidates the page cache first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When abnormal drop_nlink are detected on the inode,
return error, to avoid corruption propagation.
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
