This patch introduces an ASYNC IPU policy.
Under senario of large # of async updating(e.g. log writing in Android),
disk would be seriously fragmented, and higher frequent gc would be triggered.
This patch uses IPU to rewrite the async update writting, since async is
NOT sensitive to io latency.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
This patch adds to show the max number of volatile operations which are
conducting concurrently.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After filemap_write_and_wait_range fail, the FI_ATOMIC_FILE flags is removed,
so that f2fs should not increase the stat of atomic_write.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As discuss with Jaegeuk and Chao,
"Once checkpoint is done, f2fs doesn't need to update there-in filename at all."
The disk-level filename is used only one case,
1. create a file A under a dir
2. sync A
3. godown
4. umount
5. mount (roll_forward)
Only the rename/cross_rename changes the filename, if it happens,
a. between step 1 and 2, the sync A will caused checkpoint, so that,
the roll_forward at step 5 never happens.
b. after step 2, the roll_forward happens, file A will roll forward
to the result as after step 1.
So that, any updating the disk filename is useless, just cleanup it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Clear FI_DATA_EXIST flag atomically in truncate_inline_inode, and
the return value from truncate_inline_inode isn't used, remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's needless of mnt_want_write_file for arguments checking.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The inode_newsize_ok is better than only checking the maxbytes,
eg. the rlimit etc.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If move file range return error, the data copied to user-space is duplicate.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch checks the parameter range passed by ioctl to void that range
exceeds the max_file_blocks limit.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now f2fs only supports volatile writes for journal db regular file.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fix a error return value in truncate_partial_data_page
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This round introduces several interesting features such as on-disk NAT bitmaps,
IO alignment, and a discard thread. And it includes a couple of major bug fixes
as below.
== Enhancement ==
- introduce on-disk bitmaps to avoid scanning NAT blocks when getting free nids
- support IO alignment to prepare open-channel SSD integration in future
- introduce a discard thread to avoid long latency during checkpoint and fstrim
- use SSR for warm node and enable inline_xattr by default
- introduce in-memory bitmaps to check FS consistency for debugging
- improve write_begin by avoiding needless read IO
== Bug fix ==
- fix broken zone_reset behavior for SMR drive
- fix wrong victim selection policy during GC
- fix missing behavior when preparing discard commands
- fix bugs in atomic write support and fiemap
- workaround to handle multiple f2fs_add_link calls having same name
And it includes a bunch of clean-up patches as well.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=tw8c
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This round introduces several interesting features such as on-disk NAT
bitmaps, IO alignment, and a discard thread. And it includes a couple
of major bug fixes as below.
Enhancements:
- introduce on-disk bitmaps to avoid scanning NAT blocks when getting
free nids
- support IO alignment to prepare open-channel SSD integration in
future
- introduce a discard thread to avoid long latency during checkpoint
and fstrim
- use SSR for warm node and enable inline_xattr by default
- introduce in-memory bitmaps to check FS consistency for debugging
- improve write_begin by avoiding needless read IO
Bug fixes:
- fix broken zone_reset behavior for SMR drive
- fix wrong victim selection policy during GC
- fix missing behavior when preparing discard commands
- fix bugs in atomic write support and fiemap
- workaround to handle multiple f2fs_add_link calls having same name
... and it includes a bunch of clean-up patches as well"
* tag 'for-f2fs-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (97 commits)
f2fs: avoid to flush nat journal entries
f2fs: avoid to issue redundant discard commands
f2fs: fix a plint compile warning
f2fs: add f2fs_drop_inode tracepoint
f2fs: Fix zoned block device support
f2fs: remove redundant set_page_dirty()
f2fs: fix to enlarge size of write_io_dummy mempool
f2fs: fix memory leak of write_io_dummy mempool during umount
f2fs: fix to update F2FS_{CP_}WB_DATA count correctly
f2fs: use MAX_FREE_NIDS for the free nids target
f2fs: introduce free nid bitmap
f2fs: new helper cur_cp_crc() getting crc in f2fs_checkpoint
f2fs: update the comment of default nr_pages to skipping
f2fs: drop the duplicate pval in f2fs_getxattr
f2fs: Don't update the xattr data that same as the exist
f2fs: kill __is_extent_same
f2fs: avoid bggc->fggc when enough free segments are avaliable after cp
f2fs: select target segment with closer temperature in SSR mode
f2fs: show simple call stack in fault injection message
f2fs: no need lock_op in f2fs_write_inline_data
...
This patch remove redundant set_page_dirty in truncate_blocks
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to flush data writes before flushing last node block writes by using
FUA with PREFLUSH. We don't need to guarantee precedent node writes since if
those are not written, we can't reach to the last node block when scanning
node block chain during roll-forward recovery.
Afterwards f2fs_wait_on_page_writeback guarantees all the IO submission to
disk, which builds a valid node block chain.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sheng Yong reports needless preallocation if write(small_buffer, large_size)
is called.
In that case, f2fs preallocates large_size, but vfs returns early due to
small_buffer size. Let's detect it before preallocation phase in f2fs.
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a new flag to indicate inode status of doing atomic
write committing, so that, we can keep atomic write status for inode
during atomic committing, then we can skip GCing pages of atomic write inode,
that avoids random GCed datas being mixed with current transaction, so
isolation of transaction can be kept.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A test program gets the SEEK_DATA with two values between
a new created file and the exist file on f2fs filesystem.
F2FS filesystem, (the first "test1" is a new file)
SEEK_DATA size != 0 (offset = 8192)
SEEK_DATA size != 0 (offset = 4096)
PNFS filesystem, (the first "test1" is a new file)
SEEK_DATA size != 0 (offset = 4096)
SEEK_DATA size != 0 (offset = 4096)
int main(int argc, char **argv)
{
char *filename = argv[1];
int offset = 1, i = 0, fd = -1;
if (argc < 2) {
printf("Usage: %s f2fsfilename\n", argv[0]);
return -1;
}
/*
if (!access(filename, F_OK) || errno != ENOENT) {
printf("Needs a new file for test, %m\n");
return -1;
}*/
fd = open(filename, O_RDWR | O_CREAT, 0777);
if (fd < 0) {
printf("Create test file %s failed, %m\n", filename);
return -1;
}
for (i = 0; i < 20; i++) {
offset = 1 << i;
ftruncate(fd, 0);
lseek(fd, offset, SEEK_SET);
write(fd, "test", 5);
/* Get the alloc size by seek data equal zero*/
if (lseek(fd, 0, SEEK_DATA)) {
printf("SEEK_DATA size != 0 (offset = %d)\n", offset);
break;
}
}
close(fd);
return 0;
}
Reported-and-Tested-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to show the max number of atomic operations which are
conducting concurrently.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
needed for both ext4 and xfs dax changes to use iomap for DAX. It
also includes the fscrypt branch which is needed for ubifs encryption
work as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlhQQVEACgkQ8vlZVpUN
gaN9TQgAoCD+V4kJjMCFhiV8u6QR3hqD6bOZbggo5wJf4CHglWkmrbAmc3jANOgH
CKsXDRRjxuDjPXf1ukB1i4M7ArLYjkbbzKdsu7lismoJLS+w8uwUKSNdep+LYMjD
alxUcf5DCzLlUmdOdW4yE22L+CwRfqfs8IpBvKmJb7DrAKiwJVA340ys6daBGuu1
63xYx0QIyPzq0xjqLb6TVf88HUI4NiGVXmlm2wcrnYd5966hEZd/SztOZTVCVWOf
Z0Z0fGQ1WJzmaBB9+YV3aBi+BObOx4m2PUprIa531+iEW02E+ot5Xd4vVQFoV/r4
NX3XtoBrT1XlKagy2sJLMBoCavqrKw==
=j4KP
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge request includes the dax-4.0-iomap-pmd branch which is
needed for both ext4 and xfs dax changes to use iomap for DAX. It also
includes the fscrypt branch which is needed for ubifs encryption work
as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
dax: Fix sleep in atomic contex in grab_mapping_entry()
fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
fscrypt: Delay bounce page pool allocation until needed
fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
fscrypt: Never allocate fscrypt_ctx on in-place encryption
fscrypt: Use correct index in decrypt path.
fscrypt: move the policy flags and encryption mode definitions to uapi header
fscrypt: move non-public structures and constants to fscrypt_private.h
fscrypt: unexport fscrypt_initialize()
fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
fscrypto: move ioctl processing more fully into common code
fscrypto: remove unneeded Kconfig dependencies
MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: remove another test in ext4_alloc_file_blocks()
Documentation: fix description of ext4's block_validity mount option
ext4: fix checks for data=ordered and journal_async_commit options
...
This patch fix a missing size change in f2fs_setattr
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Multiple bugs were recently fixed in the "set encryption policy" ioctl.
To make it clear that fscrypt_process_policy() and fscrypt_get_policy()
implement ioctls and therefore their implementations must take standard
security and correctness precautions, rename them to
fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the
latter take in a struct file * to make it consistent with the former.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 1beba1b3a9.
The perpcu_counter doesn't provide atomicity in single core and consume more
DRAM. That incurs fs_mark test failure due to ENOMEM.
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a file needs to keep its i_size by fallocate, we need to turn off auto
recovery during roll-forward recovery.
This will resolve the below scenario.
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync"
3. md5sum /mnt/f2fs/file;
4. godown /mnt/f2fs/
5. umount /mnt/f2fs/
6. mount -t f2fs /dev/sdx /mnt/f2fs
7. md5sum /mnt/f2fs/file
Reported-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For below two cases, we can't guarantee data consistence:
a)
1. xfs_io "pwrite 0 4195328" "fsync"
2. xfs_io "pwrite 4195328 1024" "fdatasync"
3. godown
4. umount & mount
--> isize we updated before fdatasync won't be recovered
b)
1. xfs_io "pwrite -S 0xcc 0 4202496" "fsync"
2. xfs_io "fpunch 4194304 4096" "fdatasync"
3. godown
4. umount & mount
--> dnode we punched before fdatasync won't be recovered
The reason is that normally fdatasync won't be aware of modification
of metadata in file, e.g. isize changing, dnode updating, so in ->fsync
we will skip flushing node pages for above cases, result in making
fdatasynced file being lost during recovery.
Currently we have introduced DIRTY_META global list in sbi for tracking
dirty inode selectively, so in fdatasync we can choose to flush nodes
depend on dirty state of current inode in the list.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.
Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If many threads hit has_not_enough_free_secs() in f2fs_balance_fs() at the same
time, all the threads would do FG_GC or BG_GC.
In this critical path, we totally don't need to do BG_GC at all.
Let's avoid that.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is to avoid no free segment bug during checkpoint caused by a number of
dirty inodes.
The case was reported by Chao like this.
1. mount with lazytime option
2. fill 4k file until disk is full
3. sync filesystem
4. read all files in the image
5. umount
In this case, we actually don't need to flush dirty inode to inode page during
checkpoint.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode becomes dirty, we need to check the # of dirty inodes whether or not
further checkpoint would be required.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_balance_fs should be called in between node page updating, otherwise
node page count will exceeded far beyond watermark of triggering
foreground garbage collection, result in facing high risk of hitting LFS
allocation failure.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the last ilen case, i was already increased, resulting in accessing out-
of-boundary entry of do_replace and blkaddr.
Fix to check ilen first to exit the loop.
Fixes: 2aa8fbb9693020 ("f2fs: refactor __exchange_data_block for speed up")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
injection facility. With this, we could fix several corner cases. And, in order
to improve the performance, we set inline_dentry by default and enhance the
exisiting discard issue flow. In addition, we added f2fs_migrate_page for better
memory management.
= Enhancement =
- set inline_dentry by default
- improve discard issue flow
- add more fault injection cases in f2fs
- allow block preallocation for encrypted files
- introduce migrate_page callback function
- avoid truncating the next direct node block at every checkpoint
= Bug fixes =
- set page flag correctly between write_begin and write_end
- missing error handling cases detected by fault injection
- preallocate blocks regarding to 4KB alignement correctly
- dentry and filename handling of encryption
- lost xattrs of directories
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=crpN
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've investigated how f2fs deals with errors given by
our fault injection facility. With this, we could fix several corner
cases. And, in order to improve the performance, we set inline_dentry
by default and enhance the exisiting discard issue flow. In addition,
we added f2fs_migrate_page for better memory management.
Enhancements:
- set inline_dentry by default
- improve discard issue flow
- add more fault injection cases in f2fs
- allow block preallocation for encrypted files
- introduce migrate_page callback function
- avoid truncating the next direct node block at every checkpoint
Bug fixes:
- set page flag correctly between write_begin and write_end
- missing error handling cases detected by fault injection
- preallocate blocks regarding to 4KB alignement correctly
- dentry and filename handling of encryption
- lost xattrs of directories"
* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
f2fs: introduce update_ckpt_flags to clean up
f2fs: don't submit irrelevant page
f2fs: fix to commit bio cache after flushing node pages
f2fs: introduce get_checkpoint_version for cleanup
f2fs: remove dead variable
f2fs: remove redundant io plug
f2fs: support checkpoint error injection
f2fs: fix to recover old fault injection config in ->remount_fs
f2fs: do fault injection initialization in default_options
f2fs: remove redundant value definition
f2fs: support configuring fault injection per superblock
f2fs: adjust display format of segment bit
f2fs: remove dirty inode pages in error path
f2fs: do not unnecessarily null-terminate encrypted symlink data
f2fs: handle errors during recover_orphan_inodes
f2fs: avoid gc in cp_error case
f2fs: should put_page for summary page
f2fs: assign return value in f2fs_gc
f2fs: add customized migrate_page callback
f2fs: introduce cp_lock to protect updating of ckpt_flags
...
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
When src and dst is the same file, and the latter part of source region
overlaps with the former part of destination region, current implement
will overwrite data which hasn't been moved yet and truncate data in
overlapped region.
This patch return -EINVAL when such cases occur and return 0 when
source region and destination region is actually the same part of
the same file.
Signed-off-by: Fan li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
