Input updates for v6.1-rc5

- a fix for 8042 to stop leaking platform device on unload
 
 - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
   need to reset controller to load config from firmware
 
 - a workaround for Acer Switch to avoid interrupt storm from home and
   power buttons
 
 - a workaround for more ASUS ZenBook models to detect keyboard
   controller
 
 - a fix for iforce driver to properly handle communication errors
 
 - touchpad on HP Laptop 15-da3001TU switched to RMI mode
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY3gwkAAKCRBAj56VGEWX
 nIdPAP9qdY9UvJD3+suFxN/q0jH1V3MvOzkg96CeLhHtAHqr/QEAmnuxKyspqlPa
 kqH7eYAMrAH7UFPhTVAeEM0eM3rk9ws=
 =IjfA
 -----END PGP SIGNATURE-----

Merge tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a fix for 8042 to stop leaking platform device on unload

 - a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
   need to reset controller to load config from firmware

 - a workaround for Acer Switch to avoid interrupt storm from home and
   power buttons

 - a workaround for more ASUS ZenBook models to detect keyboard
   controller

 - a fix for iforce driver to properly handle communication errors

 - touchpad on HP Laptop 15-da3001TU switched to RMI mode

* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix leaking of platform device on module removal
  Input: i8042 - apply probe defer to more ASUS ZenBook models
  Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
  Input: soc_button_array - add use_low_level_irq module parameter
  Input: iforce - invert valid length check when fetching device IDs
  Input: goodix - try resetting the controller when no config is set
  dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
  Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode

Documentation/devicetree/bindings/input/goodix,gt7375p.yaml

@@ -16,8 +16,11 @@ description:
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
 
   reg:
     enum:

drivers/input/joystick/iforce/iforce-main.c

@@ -273,22 +273,22 @@ int iforce_init_device(struct device *parent, u16 bustype,
  * Get device info.
  */
 
-	if (!iforce_get_id_packet(iforce, 'M', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'M', buf, &len) && len >= 3)
 		input_dev->id.vendor = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet M\n");
 
-	if (!iforce_get_id_packet(iforce, 'P', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'P', buf, &len) && len >= 3)
 		input_dev->id.product = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet P\n");
 
-	if (!iforce_get_id_packet(iforce, 'B', buf, &len) || len < 3)
+	if (!iforce_get_id_packet(iforce, 'B', buf, &len) && len >= 3)
 		iforce->device_memory.end = get_unaligned_le16(buf + 1);
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet B\n");
 
-	if (!iforce_get_id_packet(iforce, 'N', buf, &len) || len < 2)
+	if (!iforce_get_id_packet(iforce, 'N', buf, &len) && len >= 2)
 		ff_effects = buf[1];
 	else
 		dev_warn(&iforce->dev->dev, "Device does not respond to id packet N\n");

drivers/input/misc/soc_button_array.c

@@ -18,6 +18,10 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
+static bool use_low_level_irq;
+module_param(use_low_level_irq, bool, 0444);
+MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered");
+
 struct soc_button_info {
 	const char *name;
 	int acpi_index;
@@ -73,6 +77,13 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
 		},
 	},
+	{
+		/* Acer Switch V 10 SW5-017, same issue as Acer Switch 10 SW5-012. */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SW5-017"),
+		},
+	},
 	{
 		/*
 		 * Acer One S1003. _LID method messes with power-button GPIO
@@ -164,7 +175,8 @@ soc_button_device_create(struct platform_device *pdev,
 		}
 
 		/* See dmi_use_low_level_irq[] comment */
-		if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) {
+		if (!autorepeat && (use_low_level_irq ||
+				    dmi_check_system(dmi_use_low_level_irq))) {
 			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
 			gpio_keys[n_buttons].irq = irq;
 			gpio_keys[n_buttons].gpio = -ENOENT;

drivers/input/mouse/synaptics.c

@@ -192,6 +192,7 @@ static const char * const smbus_pnp_ids[] = {
 	"SYN3221", /* HP 15-ay000 */
 	"SYN323d", /* HP Spectre X360 13-w013dx */
 	"SYN3257", /* HP Envy 13-ad105ng */
+	"SYN3286", /* HP Laptop 15-da3001TU */
 	NULL
 };
 

drivers/input/serio/i8042-acpipnpio.h

@@ -115,18 +115,18 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_NEVER)
 	},
 	{
-		/* ASUS ZenBook UX425UA */
+		/* ASUS ZenBook UX425UA/QA */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425"),
 		},
 		.driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER)
 	},
 	{
-		/* ASUS ZenBook UM325UA */
+		/* ASUS ZenBook UM325UA/QA */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325"),
 		},
 		.driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER)
 	},

drivers/input/serio/i8042.c

@@ -1543,8 +1543,6 @@ static int i8042_probe(struct platform_device *dev)
 {
 	int error;
 
-	i8042_platform_device = dev;
-
 	if (i8042_reset == I8042_RESET_ALWAYS) {
 		error = i8042_controller_selftest();
 		if (error)
@@ -1582,7 +1580,6 @@ static int i8042_probe(struct platform_device *dev)
 	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
 	i8042_free_irqs();
 	i8042_controller_reset(false);
-	i8042_platform_device = NULL;
 
 	return error;
 }
@@ -1592,7 +1589,6 @@ static int i8042_remove(struct platform_device *dev)
 	i8042_unregister_ports();
 	i8042_free_irqs();
 	i8042_controller_reset(false);
-	i8042_platform_device = NULL;
 
 	return 0;
 }

drivers/input/touchscreen/goodix.c

@@ -1158,6 +1158,7 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
+retry_read_config:
 	/* Read configuration and apply touchscreen parameters */
 	goodix_read_config(ts);
 
@@ -1165,6 +1166,16 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 	touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
 
 	if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) {
+		if (!ts->reset_controller_at_probe &&
+		    ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) {
+			dev_info(&ts->client->dev, "Config not set, resetting controller\n");
+			/* Retry after a controller reset */
+			ts->reset_controller_at_probe = true;
+			error = goodix_reset(ts);
+			if (error)
+				return error;
+			goto retry_read_config;
+		}
 		dev_err(&ts->client->dev,
 			"Invalid config (%d, %d, %d), using defaults\n",
 			ts->prop.max_x, ts->prop.max_y, ts->max_touch_num);