diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3097307b7cb7..af2c28946319 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -696,13 +696,20 @@ static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
 	},
 };
 
+static struct gpiod_lookup_table sdhi0_gpio_table = {
+	.dev_id = "sh_mobile_sdhi.0",
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTY7, "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct tmio_mmc_data sdhi0_info = {
 	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
 	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
 	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
 			  MMC_CAP_NEEDS_POLL,
-	.flags		= TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= GPIO_PTY7,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -735,8 +742,15 @@ static struct tmio_mmc_data sdhi1_info = {
 	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
 	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
 			  MMC_CAP_NEEDS_POLL,
-	.flags		= TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= GPIO_PTW7,
+};
+
+static struct gpiod_lookup_table sdhi1_gpio_table = {
+	.dev_id = "sh_mobile_sdhi.1",
+	.table = {
+		/* Card detect */
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTW7, "cd", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct resource sdhi1_resources[] = {
@@ -1445,6 +1459,10 @@ static int __init arch_setup(void)
 	gpiod_add_lookup_table(&cn12_power_gpiod_table);
 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
 	gpiod_add_lookup_table(&sdhi0_power_gpiod_table);
+	gpiod_add_lookup_table(&sdhi0_gpio_table);
+#endif
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	gpiod_add_lookup_table(&sdhi1_gpio_table);
 #endif
 
 	return platform_add_devices(ecovec_devices,
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index d396c5156053..085a0fab769c 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1168,11 +1168,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 	if (ret < 0)
 		return ret;
 
-	if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
-		ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio, 0);
-		if (ret)
-			return ret;
-	}
+	/*
+	 * Look for a card detect GPIO, if it fails with anything
+	 * else than a probe deferral, just live without it.
+	 */
+	ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+	if (ret == -EPROBE_DEFER)
+		return ret;
 
 	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
 	mmc->caps2 |= pdata->capabilities2;
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 1e70060c92ce..e2687a30e5a1 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -54,12 +54,8 @@
  * idle before writing to some registers.
  */
 #define TMIO_MMC_HAS_IDLE_WAIT		BIT(4)
-/*
- * A GPIO is used for card hotplug detection. We need an extra flag for this,
- * because 0 is a valid GPIO number too, and requiring users to specify
- * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
- */
-#define TMIO_MMC_USE_GPIO_CD		BIT(5)
+
+/* BIT(5) is unused */
 
 /*
  * Some controllers have CMD12 automatically
@@ -104,7 +100,6 @@ struct tmio_mmc_data {
 	unsigned long			capabilities2;
 	unsigned long			flags;
 	u32				ocr_mask;	/* available voltages */
-	unsigned int			cd_gpio;
 	int				alignment_shift;
 	dma_addr_t			dma_rx_offset;
 	unsigned int			max_blk_count;