OpenRISC: Build infrastructure

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Jonas Bonn 2011-06-04 21:52:05 +03:00
parent ac689eb7f9
commit f8c4a270d9
9 changed files with 545 additions and 0 deletions

207
arch/openrisc/Kconfig Normal file
View file

@ -0,0 +1,207 @@
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
config OPENRISC
def_bool y
select OF
select OF_EARLY_FLATTREE
select HAVE_MEMBLOCK
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
config MMU
def_bool y
config WISHBONE_BUS_BIG_ENDIAN
def_bool y
config SYMBOL_PREFIX
string
default ""
config HAVE_DMA_ATTRS
def_bool y
config UID16
def_bool y
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
def_bool n
config GENERIC_HWEIGHT
def_bool y
config GENERIC_IOMAP
def_bool y
config NO_IOPORT
def_bool y
config GENERIC_GPIO
def_bool y
config GENERIC_CLOCKEVENTS
def_bool y
config TRACE_IRQFLAGS_SUPPORT
def_bool y
# For now, use generic checksum functions
#These can be reimplemented in assembly later if so inclined
config GENERIC_CSUM
def_bool y
config GENERIC_FIND_NEXT_BIT
def_bool y
source "init/Kconfig"
menu "Processor type and features"
choice
prompt "Subarchitecture"
default OR1K_1200
config OR1K_1200
bool "OR1200"
help
Generic OpenRISC 1200 architecture
endchoice
config OPENRISC_BUILTIN_DTB
string "Builtin DTB"
default ""
menu "Class II Instructions"
config OPENRISC_HAVE_INST_FF1
bool "Have instruction l.ff1"
default y
help
Select this if your implementation has the Class II instruction l.ff1
config OPENRISC_HAVE_INST_FL1
bool "Have instruction l.fl1"
default y
help
Select this if your implementation has the Class II instruction l.fl1
config OPENRISC_HAVE_INST_MUL
bool "Have instruction l.mul for hardware multiply"
default y
help
Select this if your implementation has a hardware multiply instruction
config OPENRISC_HAVE_INST_DIV
bool "Have instruction l.div for hardware divide"
default y
help
Select this if your implementation has a hardware divide instruction
endmenu
source "kernel/time/Kconfig"
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "mm/Kconfig"
config OPENRISC_NO_SPR_SR_DSX
bool "use SPR_SR_DSX software emulation" if OR1K_1200
default y
help
SPR_SR_DSX bit is status register bit indicating whether
the last exception has happened in delay slot.
OpenRISC architecture makes it optional to have it implemented
in hardware and the OR1200 does not have it.
Say N here if you know that your OpenRISC processor has
SPR_SR_DSX bit implemented. Say Y if you are unsure.
config CMDLINE
string "Default kernel command string"
default ""
help
On some architectures there is currently no way for the boot loader
to pass arguments to the kernel. For these architectures, you should
supply some command-line options at build time by entering them
here.
menu "Debugging options"
config DEBUG_STACKOVERFLOW
bool "Check for kernel stack overflow"
default y
help
Make extra checks for space avaliable on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.
Say Y if you are unsure.
config JUMP_UPON_UNHANDLED_EXCEPTION
bool "Try to die gracefully"
default y
help
Now this puts kernel into infinite loop after first oops. Till
your kernel crashes this doesn't have any influence.
Say Y if you are unsure.
config OPENRISC_EXCEPTION_DEBUG
bool "Print processor state at each exception"
default n
help
This option will make your kernel unusable for all but kernel
debugging.
Say N if you are unsure.
config OPENRISC_ESR_EXCEPTION_BUG_CHECK
bool "Check for possible ESR exception bug"
default n
help
This option enables some checks that might expose some problems
in kernel.
Say N if you are unsure.
endmenu
endmenu
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
menu "Kernel hacking"
source "lib/Kconfig.debug"
endmenu

55
arch/openrisc/Makefile Normal file
View file

@ -0,0 +1,55 @@
# BK Id: %F% %I% %G% %U% %#%
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# Modifications for the OpenRISC architecture:
# Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
# Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
#
# Based on:
# arch/i386/Makefile
KBUILD_DEFCONFIG := or1ksim_defconfig
LDFLAGS :=
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
LDFLAGS_vmlinux :=
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
KBUILD_CFLAGS += -pipe -ffixed-r10
ifeq ($(CONFIG_OPENRISC_HAVE_INST_MUL),y)
KBUILD_CFLAGS += $(call cc-option,-mhard-mul)
else
KBUILD_CFLAGS += $(call cc-option,-msoft-mul)
endif
ifeq ($(CONFIG_OPENRISC_HAVE_INST_DIV),y)
KBUILD_CFLAGS += $(call cc-option,-mhard-div)
else
KBUILD_CFLAGS += $(call cc-option,-msoft-div)
endif
head-y := arch/openrisc/kernel/head.o arch/openrisc/kernel/init_task.o
core-y += arch/openrisc/lib/ \
arch/openrisc/kernel/ \
arch/openrisc/mm/
libs-y += $(LIBGCC)
ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
BUILTIN_DTB := y
else
BUILTIN_DTB := n
endif
core-$(BUILTIN_DTB) += arch/openrisc/boot/
all: vmlinux

View file

@ -0,0 +1,15 @@
ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o
else
BUILTIN_DTB :=
endif
obj-y += $(BUILTIN_DTB)
clean-files := *.dtb.S
#DTC_FLAGS ?= -p 1024
$(obj)/%.dtb: $(src)/dts/%.dts
$(call cmd,dtc)

View file

@ -0,0 +1,65 @@
CONFIG_CROSS_COMPILE="or32-linux-"
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_GZIP is not set
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_EPOLL is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLOB=y
CONFIG_MODULES=y
# CONFIG_BLOCK is not set
CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
CONFIG_NO_HZ=y
CONFIG_HZ_100=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ETHOC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set

View file

@ -0,0 +1,64 @@
include include/asm-generic/Kbuild.asm
header-y += spr_defs.h
generic-y += atomic.h
generic-y += auxvec.h
generic-y += bitsperlong.h
generic-y += bug.h
generic-y += bugs.h
generic-y += cacheflush.h
generic-y += checksum.h
generic-y += cmpxchg.h
generic-y += cmpxchg-local.h
generic-y += cpumask.h
generic-y += cputime.h
generic-y += current.h
generic-y += device.h
generic-y += div64.h
generic-y += dma.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
generic-y += futex.h
generic-y += hardirq.h
generic-y += hw_irq.h
generic-y += ioctl.h
generic-y += ioctls.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += kmap_types.h
generic-y += local.h
generic-y += mman.h
generic-y += module.h
generic-y += msgbuf.h
generic-y += pci.h
generic-y += percpu.h
generic-y += poll.h
generic-y += posix_types.h
generic-y += resource.h
generic-y += rmap.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += segment.h
generic-y += sembuf.h
generic-y += setup.h
generic-y += shmbuf.h
generic-y += shmparam.h
generic-y += siginfo.h
generic-y += signal.h
generic-y += socket.h
generic-y += sockios.h
generic-y += statfs.h
generic-y += stat.h
generic-y += string.h
generic-y += swab.h
generic-y += termbits.h
generic-y += termios.h
generic-y += topology.h
generic-y += types.h
generic-y += ucontext.h
generic-y += user.h

View file

@ -0,0 +1,14 @@
#
# Makefile for the linux kernel.
#
extra-y := head.o vmlinux.lds init_task.o
obj-y := setup.o idle.o or32_ksyms.o process.o dma.o \
traps.o time.o irq.o entry.o ptrace.o signal.o sys_or32.o \
sys_call_table.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_OF) += prom.o
clean:

View file

@ -0,0 +1,115 @@
/*
* OpenRISC vmlinux.lds.S
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* ld script for OpenRISC architecture
*/
/* TODO
* - clean up __offset & stuff
* - change all 8192 aligment to PAGE !!!
* - recheck if all aligments are really needed
*/
# define LOAD_OFFSET PAGE_OFFSET
# define LOAD_BASE PAGE_OFFSET
#include <asm/page.h>
#include <asm/cache.h>
#include <asm-generic/vmlinux.lds.h>
OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
jiffies = jiffies_64 + 4;
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = LOAD_BASE ;
/* _s_kernel_ro must be page aligned */
. = ALIGN(PAGE_SIZE);
_s_kernel_ro = .;
.text : AT(ADDR(.text) - LOAD_OFFSET)
{
_stext = .;
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
IRQENTRY_TEXT
*(.fixup)
*(.text.__*)
_etext = .;
}
/* TODO: Check if fixup and text.__* are really necessary
* fixup is definitely necessary
*/
_sdata = .;
/* Page alignment required for RO_DATA_SECTION */
RO_DATA_SECTION(PAGE_SIZE)
_e_kernel_ro = .;
/* Whatever comes after _e_kernel_ro had better be page-aligend, too */
/* 32 here is cacheline size... recheck this */
RW_DATA_SECTION(32, PAGE_SIZE, PAGE_SIZE)
_edata = .;
EXCEPTION_TABLE(4)
NOTES
/* Init code and data */
. = ALIGN(PAGE_SIZE);
__init_begin = .;
HEAD_TEXT_SECTION
/* Page aligned */
INIT_TEXT_SECTION(PAGE_SIZE)
/* Align __setup_start on 16 byte boundary */
INIT_DATA_SECTION(16)
PERCPU_SECTION(L1_CACHE_BYTES)
__init_end = .;
. = ALIGN(PAGE_SIZE);
.initrd : AT(ADDR(.initrd) - LOAD_OFFSET)
{
__initrd_start = .;
*(.initrd)
__initrd_end = .;
FILL (0);
. = ALIGN (PAGE_SIZE);
}
__vmlinux_end = .; /* last address of the physical file */
BSS_SECTION(0, 0, 0x20)
_end = .;
/* Throw in the debugging sections */
STABS_DEBUG
DWARF_DEBUG
/* Sections to be discarded -- must be last */
DISCARDS
}

View file

@ -0,0 +1,5 @@
#
# Makefile for or32 specific library files..
#
obj-y = string.o delay.o

View file

@ -0,0 +1,5 @@
#
# Makefile for the linux openrisc-specific parts of the memory manager.
#
obj-y := fault.o tlb.o init.o ioremap.o