dt-bindings: net: davicom,dm9000: convert to DT schema

Convert the Davicom DM9000 Fast Ethernet Controller bindings to DT
schema.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230713152848.82752-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Documentation/devicetree/bindings/net/davicom,dm9000.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9000 Fast Ethernet Controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: davicom,dm9000
+
+  reg:
+    items:
+      - description: Address registers
+      - description: Data registers
+
+  interrupts:
+    maxItems: 1
+
+  davicom,no-eeprom:
+    type: boolean
+    description: Configuration EEPROM is not available
+
+  davicom,ext-phy:
+    type: boolean
+    description: Use external PHY
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@a8000000 {
+        compatible = "davicom,dm9000";
+        reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
+        interrupt-parent = <&gph1>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        local-mac-address = [00 00 de ad be ef];
+        davicom,no-eeprom;
+    };

Documentation/devicetree/bindings/net/davicom-dm9000.txt

@@ -1,27 +0,0 @@
-Davicom DM9000 Fast Ethernet controller
-
-Required properties:
-- compatible = "davicom,dm9000";
-- reg : physical addresses and sizes of registers, must contain 2 entries:
-    first entry : address register,
-    second entry : data register.
-- interrupts : interrupt specifier specific to interrupt controller
-
-Optional properties:
-- davicom,no-eeprom : Configuration EEPROM is not available
-- davicom,ext-phy : Use external PHY
-- reset-gpios : phandle of gpio that will be used to reset chip during probe
-- vcc-supply : phandle of regulator that will be used to enable power to chip
-
-Example:
-
-	ethernet@18000000 {
-		compatible = "davicom,dm9000";
-		reg = <0x18000000 0x2 0x18000004 0x2>;
-		interrupt-parent = <&gpn>;
-		interrupts = <7 4>;
-		local-mac-address = [00 00 de ad be ef];
-		davicom,no-eeprom;
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&eth0_power>;
-	};