mirror of
https://github.com/torvalds/linux
synced 2024-07-22 03:01:14 +00:00
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE1AACgkQJNaLcl1U
h9B15Qf8CrS5zHsD54bvTcumkDgbJ8Dl9f5qz4UN/AX0mcZ1UJU6sQ0HxIGEtlPc
26pneHV9ZA0wSPw432NBpwcfe7AsWASmKUf6S2hsj4LMvnoj75iiZum8TE71ior7
QI9ARnNipB1tHk7Kmgs/pe+CqX3hhCVqYUI9w5fMIj05T5qwYbqCERws6JA2Uw97
6fb5CgI2uRYTShVVmYsE/FlxXmZqNN4NnNxlVvUSM5TE3Tayf+BCEqhpwuh59Pt/
G+mZfj3eof0HdjGPQbLRPOWQOa3bT8gmT89OlbmmMf17+975pgShBbARzkv41vk1
ifr6muHweaDLD7gloS/HUr4JRo9Daw==
=ZYC5
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.9
This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver. Highlights include:
- SoundWire support for AMD ACP 6.3 systems.
- Support for reporting version information for AVS firmware.
- Support DSPless mode for Intel Soundwire systems.
- Support for configuring CS35L56 amplifiers using EFI calibration
data.
- Log which component is being operated on as part of power management
trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
This commit is contained in:
Takashi Iwai
commit
f5d9ddf121
11
.mailmap
11
.mailmap
|
|
@ -191,10 +191,11 @@ Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
|
|||
Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
|
||||
Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
|
||||
Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
|
||||
Geliang Tang <geliang.tang@linux.dev> <geliang.tang@suse.com>
|
||||
Geliang Tang <geliang.tang@linux.dev> <geliangtang@xiaomi.com>
|
||||
Geliang Tang <geliang.tang@linux.dev> <geliangtang@gmail.com>
|
||||
Geliang Tang <geliang.tang@linux.dev> <geliangtang@163.com>
|
||||
Geliang Tang <geliang@kernel.org> <geliang.tang@linux.dev>
|
||||
Geliang Tang <geliang@kernel.org> <geliang.tang@suse.com>
|
||||
Geliang Tang <geliang@kernel.org> <geliangtang@xiaomi.com>
|
||||
Geliang Tang <geliang@kernel.org> <geliangtang@gmail.com>
|
||||
Geliang Tang <geliang@kernel.org> <geliangtang@163.com>
|
||||
Georgi Djakov <djakov@kernel.org> <georgi.djakov@linaro.org>
|
||||
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
|
||||
Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
|
||||
|
|
@ -289,6 +290,7 @@ Johan Hovold <johan@kernel.org> <johan@hovoldconsulting.com>
|
|||
John Crispin <john@phrozen.org> <blogic@openwrt.org>
|
||||
John Fastabend <john.fastabend@gmail.com> <john.r.fastabend@intel.com>
|
||||
John Keeping <john@keeping.me.uk> <john@metanate.com>
|
||||
John Moon <john@jmoon.dev> <quic_johmoo@quicinc.com>
|
||||
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
||||
John Stultz <johnstul@us.ibm.com>
|
||||
<jon.toppins+linux@gmail.com> <jtoppins@cumulusnetworks.com>
|
||||
|
|
@ -344,6 +346,7 @@ Leonid I Ananiev <leonid.i.ananiev@intel.com>
|
|||
Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
|
||||
Leon Romanovsky <leon@kernel.org> <leonro@mellanox.com>
|
||||
Leon Romanovsky <leon@kernel.org> <leonro@nvidia.com>
|
||||
Leo Yan <leo.yan@linux.dev> <leo.yan@linaro.org>
|
||||
Liam Mark <quic_lmark@quicinc.com> <lmark@codeaurora.org>
|
||||
Linas Vepstas <linas@austin.ibm.com>
|
||||
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
|
||||
|
|
|
|||
13
CREDITS
13
CREDITS
|
|
@ -2161,6 +2161,19 @@ N: Mike Kravetz
|
|||
E: mike.kravetz@oracle.com
|
||||
D: Maintenance and development of the hugetlb subsystem
|
||||
|
||||
N: Seth Jennings
|
||||
E: sjenning@redhat.com
|
||||
D: Creation and maintenance of zswap
|
||||
|
||||
N: Dan Streetman
|
||||
E: ddstreet@ieee.org
|
||||
D: Maintenance and development of zswap
|
||||
D: Creation and maintenance of the zpool API
|
||||
|
||||
N: Vitaly Wool
|
||||
E: vitaly.wool@konsulko.com
|
||||
D: Maintenance and development of zswap
|
||||
|
||||
N: Andreas S. Krebs
|
||||
E: akrebs@altavista.net
|
||||
D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards
|
||||
|
|
|
|||
8
Documentation/ABI/testing/sysfs-bus-pci-devices-avs
Normal file
8
Documentation/ABI/testing/sysfs-bus-pci-devices-avs
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
What: /sys/devices/pci0000:00/<dev>/avs/fw_version
|
||||
Date: February 2024
|
||||
Contact: Cezary Rojewski <cezary.rojewski@intel.com>
|
||||
Description:
|
||||
Version of AudioDSP firmware ASoC avs driver is communicating
|
||||
with.
|
||||
|
||||
Format: %d.%d.%d.%d, type:major:minor:build.
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus
|
||||
What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
|
||||
Date: March 2010
|
||||
KernelVersion: 2.6.35
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -8,7 +8,7 @@ Description:
|
|||
network device queue. Possible values depend on the number
|
||||
of available CPU(s) in the system.
|
||||
|
||||
What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
|
||||
What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
|
||||
Date: April 2010
|
||||
KernelVersion: 2.6.35
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -16,7 +16,7 @@ Description:
|
|||
Number of Receive Packet Steering flows being currently
|
||||
processed by this particular network device receive queue.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -24,7 +24,7 @@ Description:
|
|||
Indicates the number of transmit timeout events seen by this
|
||||
network interface transmit queue.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
|
||||
Date: March 2015
|
||||
KernelVersion: 4.1
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -32,7 +32,7 @@ Description:
|
|||
A Mbps max-rate set for the queue, a value of zero means disabled,
|
||||
default is disabled.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
|
||||
Date: November 2010
|
||||
KernelVersion: 2.6.38
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -42,7 +42,7 @@ Description:
|
|||
network device transmit queue. Possible values depend on the
|
||||
number of available CPU(s) in the system.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
|
||||
Date: June 2018
|
||||
KernelVersion: 4.18.0
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -53,7 +53,7 @@ Description:
|
|||
number of available receive queue(s) in the network device.
|
||||
Default is disabled.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -62,7 +62,7 @@ Description:
|
|||
of this particular network device transmit queue.
|
||||
Default value is 1000.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -70,7 +70,7 @@ Description:
|
|||
Indicates the number of bytes (objects) in flight on this
|
||||
network device transmit queue.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -79,7 +79,7 @@ Description:
|
|||
on this network device transmit queue. This value is clamped
|
||||
to be within the bounds defined by limit_max and limit_min.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -88,7 +88,7 @@ Description:
|
|||
queued on this network device transmit queue. See
|
||||
include/linux/dynamic_queue_limits.h for the default value.
|
||||
|
||||
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
|
||||
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
|
||||
Date: November 2011
|
||||
KernelVersion: 3.3
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
What: /sys/class/<iface>/statistics/collisions
|
||||
What: /sys/class/net/<iface>/statistics/collisions
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -6,7 +6,7 @@ Description:
|
|||
Indicates the number of collisions seen by this network device.
|
||||
This value might not be relevant with all MAC layers.
|
||||
|
||||
What: /sys/class/<iface>/statistics/multicast
|
||||
What: /sys/class/net/<iface>/statistics/multicast
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -14,7 +14,7 @@ Description:
|
|||
Indicates the number of multicast packets received by this
|
||||
network device.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_bytes
|
||||
What: /sys/class/net/<iface>/statistics/rx_bytes
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -23,7 +23,7 @@ Description:
|
|||
See the network driver for the exact meaning of when this
|
||||
value is incremented.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_compressed
|
||||
What: /sys/class/net/<iface>/statistics/rx_compressed
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -32,7 +32,7 @@ Description:
|
|||
network device. This value might only be relevant for interfaces
|
||||
that support packet compression (e.g: PPP).
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_crc_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_crc_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -41,7 +41,7 @@ Description:
|
|||
by this network device. Note that the specific meaning might
|
||||
depend on the MAC layer used by the interface.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_dropped
|
||||
What: /sys/class/net/<iface>/statistics/rx_dropped
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -51,7 +51,7 @@ Description:
|
|||
packet processing. See the network driver for the exact
|
||||
meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -59,7 +59,7 @@ Description:
|
|||
Indicates the number of receive errors on this network device.
|
||||
See the network driver for the exact meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_fifo_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_fifo_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -68,7 +68,7 @@ Description:
|
|||
network device. See the network driver for the exact
|
||||
meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_frame_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_frame_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -78,7 +78,7 @@ Description:
|
|||
on the MAC layer protocol used. See the network driver for
|
||||
the exact meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_length_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_length_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -87,7 +87,7 @@ Description:
|
|||
error, oversized or undersized. See the network driver for the
|
||||
exact meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_missed_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_missed_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -96,7 +96,7 @@ Description:
|
|||
due to lack of capacity in the receive side. See the network
|
||||
driver for the exact meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_nohandler
|
||||
What: /sys/class/net/<iface>/statistics/rx_nohandler
|
||||
Date: February 2016
|
||||
KernelVersion: 4.6
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -104,7 +104,7 @@ Description:
|
|||
Indicates the number of received packets that were dropped on
|
||||
an inactive device by the network core.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_over_errors
|
||||
What: /sys/class/net/<iface>/statistics/rx_over_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -114,7 +114,7 @@ Description:
|
|||
(e.g: larger than MTU). See the network driver for the exact
|
||||
meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/rx_packets
|
||||
What: /sys/class/net/<iface>/statistics/rx_packets
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -122,7 +122,7 @@ Description:
|
|||
Indicates the total number of good packets received by this
|
||||
network device.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_aborted_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_aborted_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -132,7 +132,7 @@ Description:
|
|||
a medium collision). See the network driver for the exact
|
||||
meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_bytes
|
||||
What: /sys/class/net/<iface>/statistics/tx_bytes
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -143,7 +143,7 @@ Description:
|
|||
transmitted packets or all packets that have been queued for
|
||||
transmission.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_carrier_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_carrier_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -152,7 +152,7 @@ Description:
|
|||
because of carrier errors (e.g: physical link down). See the
|
||||
network driver for the exact meaning of this value.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_compressed
|
||||
What: /sys/class/net/<iface>/statistics/tx_compressed
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -161,7 +161,7 @@ Description:
|
|||
this might only be relevant for devices that support
|
||||
compression (e.g: PPP).
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_dropped
|
||||
What: /sys/class/net/<iface>/statistics/tx_dropped
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -170,7 +170,7 @@ Description:
|
|||
See the driver for the exact reasons as to why the packets were
|
||||
dropped.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -179,7 +179,7 @@ Description:
|
|||
a network device. See the driver for the exact reasons as to
|
||||
why the packets were dropped.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_fifo_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_fifo_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -188,7 +188,7 @@ Description:
|
|||
FIFO error. See the driver for the exact reasons as to why the
|
||||
packets were dropped.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_heartbeat_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_heartbeat_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -197,7 +197,7 @@ Description:
|
|||
reported as heartbeat errors. See the driver for the exact
|
||||
reasons as to why the packets were dropped.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_packets
|
||||
What: /sys/class/net/<iface>/statistics/tx_packets
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
@ -206,7 +206,7 @@ Description:
|
|||
device. See the driver for whether this reports the number of all
|
||||
attempted or successful transmissions.
|
||||
|
||||
What: /sys/class/<iface>/statistics/tx_window_errors
|
||||
What: /sys/class/net/<iface>/statistics/tx_window_errors
|
||||
Date: April 2005
|
||||
KernelVersion: 2.6.12
|
||||
Contact: netdev@vger.kernel.org
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
What: /sys/devices/.../hwmon/hwmon<i>/in0_input
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -6,7 +6,7 @@ Description: RO. Current Voltage in millivolt.
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_max
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -20,7 +20,7 @@ Description: RW. Card reactive sustained (PL1/Tau) power limit in microwatts.
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -28,7 +28,7 @@ Description: RO. Card default power limit (default TDP setting).
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -37,7 +37,7 @@ Description: RW. Sustained power limit interval (Tau in PL1/Tau) in
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_crit
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -50,7 +50,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts.
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
@ -63,7 +63,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes.
|
|||
|
||||
Only supported for particular Intel i915 graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/energy1_input
|
||||
What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input
|
||||
Date: February 2023
|
||||
KernelVersion: 6.2
|
||||
Contact: intel-gfx@lists.freedesktop.org
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
What: /sys/devices/.../hwmon/hwmon<i>/power1_max
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -12,7 +12,7 @@ Description: RW. Card reactive sustained (PL1) power limit in microwatts.
|
|||
|
||||
Only supported for particular Intel xe graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -20,7 +20,7 @@ Description: RO. Card default power limit (default TDP setting).
|
|||
|
||||
Only supported for particular Intel xe graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_crit
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -33,7 +33,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts.
|
|||
|
||||
Only supported for particular Intel xe graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -44,7 +44,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes.
|
|||
the operating frequency if the power averaged over a window
|
||||
exceeds this limit.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/in0_input
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -52,7 +52,7 @@ Description: RO. Current Voltage in millivolt.
|
|||
|
||||
Only supported for particular Intel xe graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/energy1_input
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
|
||||
Date: September 2023
|
||||
KernelVersion: 6.5
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
@ -60,7 +60,7 @@ Description: RO. Energy input of device in microjoules.
|
|||
|
||||
Only supported for particular Intel xe graphics platforms.
|
||||
|
||||
What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval
|
||||
What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
|
||||
Date: October 2023
|
||||
KernelVersion: 6.6
|
||||
Contact: intel-xe@lists.freedesktop.org
|
||||
|
|
|
|||
|
|
@ -4,18 +4,18 @@ KernelVersion: 6.5
|
|||
Contact: Miquel Raynal <miquel.raynal@bootlin.com>
|
||||
Description:
|
||||
The "cells" folder contains one file per cell exposed by the
|
||||
NVMEM device. The name of the file is: <name>@<where>, with
|
||||
<name> being the cell name and <where> its location in the NVMEM
|
||||
device, in hexadecimal (without the '0x' prefix, to mimic device
|
||||
tree node names). The length of the file is the size of the cell
|
||||
(when known). The content of the file is the binary content of
|
||||
the cell (may sometimes be ASCII, likely without trailing
|
||||
character).
|
||||
NVMEM device. The name of the file is: "<name>@<byte>,<bit>",
|
||||
with <name> being the cell name and <where> its location in
|
||||
the NVMEM device, in hexadecimal bytes and bits (without the
|
||||
'0x' prefix, to mimic device tree node names). The length of
|
||||
the file is the size of the cell (when known). The content of
|
||||
the file is the binary content of the cell (may sometimes be
|
||||
ASCII, likely without trailing character).
|
||||
Note: This file is only present if CONFIG_NVMEM_SYSFS
|
||||
is enabled.
|
||||
|
||||
Example::
|
||||
|
||||
hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d
|
||||
hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d,0
|
||||
00000000 54 4e 34 38 4d 2d 50 2d 44 4e |TN48M-P-DN|
|
||||
0000000a
|
||||
|
|
|
|||
|
|
@ -243,3 +243,10 @@ stable kernels.
|
|||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
| ASR | ASR8601 | #8601001 | N/A |
|
||||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
| Microsoft | Azure Cobalt 100| #2139208 | ARM64_ERRATUM_2139208 |
|
||||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
| Microsoft | Azure Cobalt 100| #2067961 | ARM64_ERRATUM_2067961 |
|
||||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
| Microsoft | Azure Cobalt 100| #2253138 | ARM64_ERRATUM_2253138 |
|
||||
+----------------+-----------------+-----------------+-----------------------------+
|
||||
|
|
|
|||
|
|
@ -671,8 +671,23 @@ Testing Static Functions
|
|||
------------------------
|
||||
|
||||
If we do not want to expose functions or variables for testing, one option is to
|
||||
conditionally ``#include`` the test file at the end of your .c file. For
|
||||
example:
|
||||
conditionally export the used symbol. For example:
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
/* In my_file.c */
|
||||
|
||||
VISIBLE_IF_KUNIT int do_interesting_thing();
|
||||
EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
|
||||
|
||||
/* In my_file.h */
|
||||
|
||||
#if IS_ENABLED(CONFIG_KUNIT)
|
||||
int do_interesting_thing(void);
|
||||
#endif
|
||||
|
||||
Alternatively, you could conditionally ``#include`` the test file at the end of
|
||||
your .c file. For example:
|
||||
|
||||
.. code-block:: c
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,10 @@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
|
|||
find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
|
||||
-name 'processed-schema*' \)
|
||||
|
||||
find_cmd = $(find_all_cmd) | sed 's|^$(srctree)/$(src)/||' | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | sed 's|^|$(srctree)/$(src)/|'
|
||||
find_cmd = $(find_all_cmd) | \
|
||||
sed 's|^$(srctree)/||' | \
|
||||
grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
|
||||
sed 's|^|$(srctree)/|'
|
||||
CHK_DT_DOCS := $(shell $(find_cmd))
|
||||
|
||||
quiet_cmd_yamllint = LINT $(src)
|
||||
|
|
|
|||
|
|
@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Ceva AHCI SATA Controller
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
description: |
|
||||
The Ceva SATA controller mostly conforms to the AHCI interface with some
|
||||
|
|
|
|||
|
|
@ -29,19 +29,22 @@ properties:
|
|||
|
||||
audio-ports:
|
||||
description:
|
||||
Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
|
||||
Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
|
||||
The implementation allows one or two DAIs.
|
||||
If two DAIs are defined, they must be of different type.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
items:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: |
|
||||
The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
|
||||
(see include/dt-bindings/display/tda998x.h).
|
||||
enum: [ 1, 2 ]
|
||||
- description:
|
||||
The second value defines the tda998x AP_ENA reg content when the
|
||||
DAI in question is used.
|
||||
maximum: 0xff
|
||||
|
||||
'#sound-dai-cells':
|
||||
enum: [ 0, 1 ]
|
||||
|
|
|
|||
|
|
@ -12,7 +12,8 @@ description:
|
|||
PS_MODE). Every pin can be configured as input/output.
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -78,8 +78,8 @@ examples:
|
|||
pcie@0 {
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>;
|
||||
reg = <0x0 0x1000>;
|
||||
device_type = "pci";
|
||||
|
||||
switch@0,0 {
|
||||
|
|
|
|||
|
|
@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Zynq UltraScale+ MPSoC and Versal reset
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
description: |
|
||||
The Zynq UltraScale+ MPSoC and Versal has several different resets.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,84 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Atmel wm8904 audio codec complex
|
||||
|
||||
maintainers:
|
||||
- Dharma Balasubiramani <dharma.b@microchip.com>
|
||||
|
||||
description:
|
||||
The ASoC audio complex configuration for Atmel with WM8904 audio codec.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: atmel,asoc-wm8904
|
||||
|
||||
atmel,model:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description: The user-visible name of this sound complex.
|
||||
|
||||
atmel,ssc-controller:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: The phandle of the SSC controller.
|
||||
|
||||
atmel,audio-codec:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: The phandle of the WM8731 audio codec.
|
||||
|
||||
atmel,audio-routing:
|
||||
description:
|
||||
A list of the connections between audio components. Each entry is a pair
|
||||
of strings, the first being the connection's sink, the second being the
|
||||
connection's source.
|
||||
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
|
||||
items:
|
||||
enum:
|
||||
# Board Connectors
|
||||
- Headphone Jack
|
||||
- Line In Jack
|
||||
- Mic
|
||||
# WM8904 CODEC Pins
|
||||
- IN1L
|
||||
- IN1R
|
||||
- IN2L
|
||||
- IN2R
|
||||
- IN3L
|
||||
- IN3R
|
||||
- HPOUTL
|
||||
- HPOUTR
|
||||
- LINEOUTL
|
||||
- LINEOUTR
|
||||
- MICBIAS
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- atmel,model
|
||||
- atmel,audio-routing
|
||||
- atmel,ssc-controller
|
||||
- atmel,audio-codec
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
sound {
|
||||
compatible = "atmel,asoc-wm8904";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_mck>;
|
||||
|
||||
atmel,model = "wm8904 @ AT91SAM9N12EK";
|
||||
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "HPOUTL",
|
||||
"Headphone Jack", "HPOUTR",
|
||||
"IN2L", "Line In Jack",
|
||||
"IN2R", "Line In Jack",
|
||||
"Mic", "MICBIAS",
|
||||
"IN1L", "Mic";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8904>;
|
||||
};
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Atmel at91sam9x5ek wm8731 audio complex
|
||||
|
||||
maintainers:
|
||||
- Dharma Balasubiramani <dharma.b@microchip.com>
|
||||
|
||||
description:
|
||||
The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: atmel,sam9x5-wm8731-audio
|
||||
|
||||
atmel,model:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description: The user-visible name of this sound complex.
|
||||
|
||||
atmel,ssc-controller:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: The phandle of the SSC controller.
|
||||
|
||||
atmel,audio-codec:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: The phandle of the WM8731 audio codec.
|
||||
|
||||
atmel,audio-routing:
|
||||
description:
|
||||
A list of the connections between audio components. Each entry is a pair
|
||||
of strings, the first being the connection's sink, the second being the
|
||||
connection's source.
|
||||
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
|
||||
items:
|
||||
enum:
|
||||
# Board Connectors
|
||||
- Headphone Jack
|
||||
- Line In Jack
|
||||
|
||||
# CODEC Pins
|
||||
- LOUT
|
||||
- ROUT
|
||||
- LHPOUT
|
||||
- RHPOUT
|
||||
- LLINEIN
|
||||
- RLINEIN
|
||||
- MICIN
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- atmel,model
|
||||
- atmel,ssc-controller
|
||||
- atmel,audio-codec
|
||||
- atmel,audio-routing
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
sound {
|
||||
compatible = "atmel,sam9x5-wm8731-audio";
|
||||
|
||||
atmel,model = "wm8731 @ AT91SAM9X5EK";
|
||||
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "RHPOUT",
|
||||
"Headphone Jack", "LHPOUT",
|
||||
"LLINEIN", "Line In Jack",
|
||||
"RLINEIN", "Line In Jack";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8731>;
|
||||
};
|
||||
|
|
@ -18,7 +18,12 @@ description:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
const: atmel,sama5d2-classd
|
||||
oneOf:
|
||||
- items:
|
||||
- const: atmel,sama5d2-classd
|
||||
- items:
|
||||
- const: microchip,sam9x7-classd
|
||||
- const: atmel,sama5d2-classd
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -1,35 +0,0 @@
|
|||
* Atmel at91sam9x5ek wm8731 audio complex
|
||||
|
||||
Required properties:
|
||||
- compatible: "atmel,sam9x5-wm8731-audio"
|
||||
- atmel,model: The user-visible name of this sound complex.
|
||||
- atmel,ssc-controller: The phandle of the SSC controller
|
||||
- atmel,audio-codec: The phandle of the WM8731 audio codec
|
||||
- atmel,audio-routing: A list of the connections between audio components.
|
||||
Each entry is a pair of strings, the first being the connection's sink,
|
||||
the second being the connection's source.
|
||||
|
||||
Available audio endpoints for the audio-routing table:
|
||||
|
||||
Board connectors:
|
||||
* Headphone Jack
|
||||
* Line In Jack
|
||||
|
||||
wm8731 pins:
|
||||
cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
|
||||
|
||||
Example:
|
||||
sound {
|
||||
compatible = "atmel,sam9x5-wm8731-audio";
|
||||
|
||||
atmel,model = "wm8731 @ AT91SAM9X5EK";
|
||||
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "RHPOUT",
|
||||
"Headphone Jack", "LHPOUT",
|
||||
"LLINEIN", "Line In Jack",
|
||||
"RLINEIN", "Line In Jack";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8731>;
|
||||
};
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
Atmel ASoC driver with wm8904 audio codec complex
|
||||
|
||||
Required properties:
|
||||
- compatible: "atmel,asoc-wm8904"
|
||||
- atmel,model: The user-visible name of this sound complex.
|
||||
- atmel,audio-routing: A list of the connections between audio components.
|
||||
Each entry is a pair of strings, the first being the connection's sink,
|
||||
the second being the connection's source. Valid names for sources and
|
||||
sinks are the WM8904's pins, and the jacks on the board:
|
||||
|
||||
WM8904 pins:
|
||||
|
||||
* IN1L
|
||||
* IN1R
|
||||
* IN2L
|
||||
* IN2R
|
||||
* IN3L
|
||||
* IN3R
|
||||
* HPOUTL
|
||||
* HPOUTR
|
||||
* LINEOUTL
|
||||
* LINEOUTR
|
||||
* MICBIAS
|
||||
|
||||
Board connectors:
|
||||
|
||||
* Headphone Jack
|
||||
* Line In Jack
|
||||
* Mic
|
||||
|
||||
- atmel,ssc-controller: The phandle of the SSC controller
|
||||
- atmel,audio-codec: The phandle of the WM8904 audio codec
|
||||
|
||||
Optional properties:
|
||||
- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
|
||||
|
||||
Example:
|
||||
sound {
|
||||
compatible = "atmel,asoc-wm8904";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_mck>;
|
||||
|
||||
atmel,model = "wm8904 @ AT91SAM9N12EK";
|
||||
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "HPOUTL",
|
||||
"Headphone Jack", "HPOUTR",
|
||||
"IN2L", "Line In Jack",
|
||||
"IN2R", "Line In Jack",
|
||||
"Mic", "MICBIAS",
|
||||
"IN1L", "Mic";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8904>;
|
||||
};
|
||||
|
|
@ -51,7 +51,7 @@ definitions:
|
|||
- $ref: /schemas/types.yaml#/definitions/phandle
|
||||
clocks:
|
||||
description: Indicates system clock
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
maxItems: 1
|
||||
system-clock-frequency:
|
||||
$ref: simple-card.yaml#/definitions/system-clock-frequency
|
||||
system-clock-direction-out:
|
||||
|
|
|
|||
|
|
@ -25,6 +25,9 @@ properties:
|
|||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
'#sound-dai-cells':
|
||||
const: 1
|
||||
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ properties:
|
|||
default: 0x0f
|
||||
|
||||
everest,mic1-src:
|
||||
deprecated: true
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
description:
|
||||
the value of reg 2A when headset plugged.
|
||||
|
|
@ -46,6 +47,7 @@ properties:
|
|||
default: 0x22
|
||||
|
||||
everest,mic2-src:
|
||||
deprecated: true
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
description:
|
||||
the value of reg 2A when headset unplugged.
|
||||
|
|
@ -87,7 +89,7 @@ properties:
|
|||
0 means the chip detect jack type again after button released.
|
||||
minimum: 0
|
||||
maximum: 0x7f
|
||||
default: 0x45
|
||||
default: 0x00
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
@ -107,10 +109,8 @@ examples:
|
|||
clocks = <&clks 10>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
everest,mic1-src = [22];
|
||||
everest,mic2-src = [44];
|
||||
everest,jack-pol = [0e];
|
||||
everest,interrupt-src = [08];
|
||||
everest,interrupt-clk = [45];
|
||||
everest,interrupt-clk = [00];
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,80 +0,0 @@
|
|||
Freescale Asynchronous Sample Rate Converter (ASRC) Controller
|
||||
|
||||
The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
|
||||
signal associated with an input clock into a signal associated with a different
|
||||
output clock. The driver currently works as a Front End of DPCM with other Back
|
||||
Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
|
||||
three substreams within totally 10 channels.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : Compatible list, should contain one of the following
|
||||
compatibles:
|
||||
"fsl,imx35-asrc",
|
||||
"fsl,imx53-asrc",
|
||||
"fsl,imx8qm-asrc",
|
||||
"fsl,imx8qxp-asrc",
|
||||
|
||||
- reg : Offset and length of the register set for the device.
|
||||
|
||||
- interrupts : Contains the spdif interrupt.
|
||||
|
||||
- dmas : Generic dma devicetree binding as described in
|
||||
Documentation/devicetree/bindings/dma/dma.txt.
|
||||
|
||||
- dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
|
||||
|
||||
- clocks : Contains an entry for each entry in clock-names.
|
||||
|
||||
- clock-names : Contains the following entries
|
||||
"mem" Peripheral access clock to access registers.
|
||||
"ipg" Peripheral clock to driver module.
|
||||
"asrck_<0-f>" Clock sources for input and output clock.
|
||||
"spba" The spba clock is required when ASRC is placed as a
|
||||
bus slave of the Shared Peripheral Bus and when two
|
||||
or more bus masters (CPU, DMA or DSP) try to access
|
||||
it. This property is optional depending on the SoC
|
||||
design.
|
||||
|
||||
- fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
|
||||
|
||||
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
|
||||
|
||||
- fsl,asrc-clk-map : Defines clock map used in driver. which is required
|
||||
by imx8qm/imx8qxp platform
|
||||
<0> - select the map for asrc0 in imx8qm/imx8qxp
|
||||
<1> - select the map for asrc1 in imx8qm/imx8qxp
|
||||
|
||||
Optional properties:
|
||||
|
||||
- big-endian : If this property is absent, the little endian mode
|
||||
will be in use as default. Otherwise, the big endian
|
||||
mode will be in use for all the device registers.
|
||||
|
||||
- fsl,asrc-format : Defines a mutual sample format used by DPCM Back
|
||||
Ends, which can replace the fsl,asrc-width.
|
||||
The value is 2 (S16_LE), or 6 (S24_LE).
|
||||
|
||||
Example:
|
||||
|
||||
asrc: asrc@2034000 {
|
||||
compatible = "fsl,imx53-asrc";
|
||||
reg = <0x02034000 0x4000>;
|
||||
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks 107>, <&clks 107>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks 107>, <&clks 0>, <&clks 0>;
|
||||
clock-names = "mem", "ipg", "asrck0",
|
||||
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
|
||||
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
|
||||
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
|
||||
"asrck_d", "asrck_e", "asrck_f";
|
||||
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
|
||||
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
|
||||
dma-names = "rxa", "rxb", "rxc",
|
||||
"txa", "txb", "txc";
|
||||
fsl,asrc-rate = <48000>;
|
||||
fsl,asrc-width = <16>;
|
||||
};
|
||||
|
|
@ -51,8 +51,8 @@ properties:
|
|||
- const: ctx3_tx
|
||||
|
||||
firmware-name:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
const: imx/easrc/easrc-imx8mn.bin
|
||||
items:
|
||||
- const: imx/easrc/easrc-imx8mn.bin
|
||||
description: The coefficient table for the filters
|
||||
|
||||
fsl,asrc-rate:
|
||||
|
|
|
|||
162
Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
Normal file
162
Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
Normal file
|
|
@ -0,0 +1,162 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
|
||||
|
||||
description:
|
||||
The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
|
||||
a signal associated with an input clock into a signal associated with a
|
||||
different output clock. The driver currently works as a Front End of DPCM
|
||||
with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
|
||||
three pairs to support three substreams within totally 10 channels.
|
||||
|
||||
maintainers:
|
||||
- Shawn Guo <shawnguo@kernel.org>
|
||||
- Sascha Hauer <s.hauer@pengutronix.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- enum:
|
||||
- fsl,imx35-asrc
|
||||
- fsl,imx53-asrc
|
||||
- fsl,imx8qm-asrc
|
||||
- fsl,imx8qxp-asrc
|
||||
- items:
|
||||
- enum:
|
||||
- fsl,imx6sx-asrc
|
||||
- fsl,imx6ul-asrc
|
||||
- const: fsl,imx53-asrc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
maxItems: 6
|
||||
|
||||
dma-names:
|
||||
items:
|
||||
- const: rxa
|
||||
- const: rxb
|
||||
- const: rxc
|
||||
- const: txa
|
||||
- const: txb
|
||||
- const: txc
|
||||
|
||||
clocks:
|
||||
maxItems: 19
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: mem
|
||||
- const: ipg
|
||||
- const: asrck_0
|
||||
- const: asrck_1
|
||||
- const: asrck_2
|
||||
- const: asrck_3
|
||||
- const: asrck_4
|
||||
- const: asrck_5
|
||||
- const: asrck_6
|
||||
- const: asrck_7
|
||||
- const: asrck_8
|
||||
- const: asrck_9
|
||||
- const: asrck_a
|
||||
- const: asrck_b
|
||||
- const: asrck_c
|
||||
- const: asrck_d
|
||||
- const: asrck_e
|
||||
- const: asrck_f
|
||||
- const: spba
|
||||
|
||||
fsl,asrc-rate:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: The mutual sample rate used by DPCM Back Ends
|
||||
|
||||
fsl,asrc-width:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: The mutual sample width used by DPCM Back Ends
|
||||
enum: [16, 24]
|
||||
|
||||
fsl,asrc-clk-map:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Defines clock map used in driver
|
||||
<0> - select the map for asrc0 in imx8qm/imx8qxp
|
||||
<1> - select the map for asrc1 in imx8qm/imx8qxp
|
||||
enum: [0, 1]
|
||||
|
||||
big-endian:
|
||||
type: boolean
|
||||
description:
|
||||
If this property is absent, the little endian mode will be in use as
|
||||
default. Otherwise, the big endian mode will be in use for all the
|
||||
device registers.
|
||||
|
||||
fsl,asrc-format:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Defines a mutual sample format used by DPCM Back Ends, which can
|
||||
replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
|
||||
enum: [2, 6]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- dmas
|
||||
- dma-names
|
||||
- clocks
|
||||
- clock-names
|
||||
- fsl,asrc-rate
|
||||
- fsl,asrc-width
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- fsl,imx8qm-asrc
|
||||
- fsl,imx8qxp-asrc
|
||||
then:
|
||||
required:
|
||||
- fsl,asrc-clk-map
|
||||
else:
|
||||
properties:
|
||||
fsl,asrc-clk-map: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
asrc: asrc@2034000 {
|
||||
compatible = "fsl,imx53-asrc";
|
||||
reg = <0x02034000 0x4000>;
|
||||
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
|
||||
<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||
<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
|
||||
<&clks IMX6QDL_CLK_SPBA>;
|
||||
clock-names = "mem", "ipg", "asrck_0",
|
||||
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
|
||||
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
|
||||
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
|
||||
"asrck_d", "asrck_e", "asrck_f", "spba";
|
||||
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
|
||||
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
|
||||
dma-names = "rxa", "rxb", "rxc",
|
||||
"txa", "txb", "txc";
|
||||
fsl,asrc-rate = <48000>;
|
||||
fsl,asrc-width = <16>;
|
||||
};
|
||||
|
|
@ -15,10 +15,16 @@ description: |
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx8mm-micfil
|
||||
- fsl,imx8mp-micfil
|
||||
- fsl,imx93-micfil
|
||||
oneOf:
|
||||
- items:
|
||||
- enum:
|
||||
- fsl,imx95-micfil
|
||||
- const: fsl,imx93-micfil
|
||||
|
||||
- enum:
|
||||
- fsl,imx8mm-micfil
|
||||
- fsl,imx8mp-micfil
|
||||
- fsl,imx93-micfil
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ properties:
|
|||
- fsl,imx8qm-sai
|
||||
- fsl,imx8ulp-sai
|
||||
- fsl,imx93-sai
|
||||
- fsl,imx95-sai
|
||||
- fsl,vf610-sai
|
||||
|
||||
reg:
|
||||
|
|
@ -75,12 +76,17 @@ properties:
|
|||
- const: pll11k
|
||||
minItems: 4
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: DMA controller phandle and request line for RX
|
||||
- description: DMA controller phandle and request line for TX
|
||||
|
||||
dma-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: rx
|
||||
- const: tx
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
firmware-name:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
maxItems: 1
|
||||
description:
|
||||
Filters coefficients file to load. If this property is omitted, internal
|
||||
filters are disabled.
|
||||
|
|
|
|||
|
|
@ -24,9 +24,14 @@ properties:
|
|||
const: 0
|
||||
|
||||
compatible:
|
||||
enum:
|
||||
- microchip,sam9x60-i2smcc
|
||||
- microchip,sama7g5-i2smcc
|
||||
oneOf:
|
||||
- enum:
|
||||
- microchip,sam9x60-i2smcc
|
||||
- microchip,sama7g5-i2smcc
|
||||
- items:
|
||||
- enum:
|
||||
- microchip,sam9x7-i2smcc
|
||||
- const: microchip,sam9x60-i2smcc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -107,7 +107,7 @@ patternProperties:
|
|||
properties:
|
||||
sound-dai:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
maxItems: 8
|
||||
|
||||
required:
|
||||
- link-name
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ description: |
|
|||
|
||||
allOf:
|
||||
- $ref: dai-common.yaml#
|
||||
- $ref: qcom,wcd93xx-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
@ -22,92 +23,12 @@ properties:
|
|||
- qcom,wcd9380-codec
|
||||
- qcom,wcd9385-codec
|
||||
|
||||
reset-gpios:
|
||||
description: GPIO spec for reset line to use
|
||||
maxItems: 1
|
||||
|
||||
us-euro-gpios:
|
||||
description: GPIO spec for swapping gnd and mic segments
|
||||
maxItems: 1
|
||||
|
||||
vdd-buck-supply:
|
||||
description: A reference to the 1.8V buck supply
|
||||
|
||||
vdd-rxtx-supply:
|
||||
description: A reference to the 1.8V rx supply
|
||||
|
||||
vdd-io-supply:
|
||||
description: A reference to the 1.8V I/O supply
|
||||
|
||||
vdd-mic-bias-supply:
|
||||
description: A reference to the 3.8V mic bias supply
|
||||
|
||||
qcom,tx-device:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: A reference to Soundwire tx device phandle
|
||||
|
||||
qcom,rx-device:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: A reference to Soundwire rx device phandle
|
||||
|
||||
qcom,micbias1-microvolt:
|
||||
description: micbias1 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias2-microvolt:
|
||||
description: micbias2 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias3-microvolt:
|
||||
description: micbias3 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias4-microvolt:
|
||||
description: micbias4 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,hphl-jack-type-normally-closed:
|
||||
description: Indicates that HPHL jack switch type is normally closed
|
||||
type: boolean
|
||||
|
||||
qcom,ground-jack-type-normally-closed:
|
||||
description: Indicates that Headset Ground switch type is normally closed
|
||||
type: boolean
|
||||
|
||||
qcom,mbhc-headset-vthreshold-microvolt:
|
||||
description: Voltage threshold value for headset detection
|
||||
minimum: 0
|
||||
maximum: 2850000
|
||||
|
||||
qcom,mbhc-headphone-vthreshold-microvolt:
|
||||
description: Voltage threshold value for headphone detection
|
||||
minimum: 0
|
||||
maximum: 2850000
|
||||
|
||||
qcom,mbhc-buttons-vthreshold-microvolt:
|
||||
description:
|
||||
Array of 8 Voltage threshold values corresponding to headset
|
||||
button0 - button7
|
||||
minItems: 8
|
||||
maxItems: 8
|
||||
|
||||
'#sound-dai-cells':
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reset-gpios
|
||||
- qcom,tx-device
|
||||
- qcom,rx-device
|
||||
- qcom,micbias1-microvolt
|
||||
- qcom,micbias2-microvolt
|
||||
- qcom,micbias3-microvolt
|
||||
- qcom,micbias4-microvolt
|
||||
- "#sound-dai-cells"
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,69 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm SoundWire devices on WCD9390/WCD9395
|
||||
|
||||
maintainers:
|
||||
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
||||
|
||||
description: |
|
||||
Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
|
||||
It has RX and TX Soundwire devices. This bindings is for the devices.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: sdw20217010e00
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
qcom,tx-port-mapping:
|
||||
description: |
|
||||
Specifies static port mapping between device and host tx ports.
|
||||
In the order of the device port index.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 4
|
||||
maxItems: 4
|
||||
|
||||
qcom,rx-port-mapping:
|
||||
description: |
|
||||
Specifies static port mapping between device and host rx ports.
|
||||
In the order of device port index.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 6
|
||||
maxItems: 6
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
soundwire@3210000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x03210000 0x2000>;
|
||||
wcd938x_rx: codec@0,4 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 4>;
|
||||
qcom,rx-port-mapping = <1 2 3 4 5 6>;
|
||||
};
|
||||
};
|
||||
|
||||
soundwire@3230000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x03230000 0x2000>;
|
||||
wcd938x_tx: codec@0,3 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 3>;
|
||||
qcom,tx-port-mapping = <2 3 4 5>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
96
Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
Normal file
96
Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm WCD9380/WCD9385 Audio Codec
|
||||
|
||||
maintainers:
|
||||
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
||||
|
||||
description: |
|
||||
Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
|
||||
It has RX and TX Soundwire devices.
|
||||
The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
|
||||
accessible over an I2C interface.
|
||||
The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
|
||||
subsystems are external to the IC, thus requiring DT port-endpoint graph description
|
||||
to handle USB-C altmode & orientation switching for Audio Accessory Mode.
|
||||
|
||||
allOf:
|
||||
- $ref: dai-common.yaml#
|
||||
- $ref: qcom,wcd93xx-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: qcom,wcd9390-codec
|
||||
- items:
|
||||
- const: qcom,wcd9395-codec
|
||||
- const: qcom,wcd9390-codec
|
||||
|
||||
mode-switch:
|
||||
description: Flag the port as possible handler of altmode switching
|
||||
type: boolean
|
||||
|
||||
orientation-switch:
|
||||
description: Flag the port as possible handler of orientation switching
|
||||
type: boolean
|
||||
|
||||
port:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description:
|
||||
A port node to link the WCD939x Codec node to USB MUX subsystems for the
|
||||
purpose of handling altmode muxing and orientation switching to detect and
|
||||
enable Audio Accessory Mode.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
codec {
|
||||
compatible = "qcom,wcd9390-codec";
|
||||
reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
|
||||
#sound-dai-cells = <1>;
|
||||
qcom,tx-device = <&wcd939x_tx>;
|
||||
qcom,rx-device = <&wcd939x_rx>;
|
||||
qcom,micbias1-microvolt = <1800000>;
|
||||
qcom,micbias2-microvolt = <1800000>;
|
||||
qcom,micbias3-microvolt = <1800000>;
|
||||
qcom,micbias4-microvolt = <1800000>;
|
||||
qcom,hphl-jack-type-normally-closed;
|
||||
qcom,ground-jack-type-normally-closed;
|
||||
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
|
||||
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
|
||||
soundwire@3210000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x03210000 0x2000>;
|
||||
wcd939x_rx: codec@0,4 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 4>;
|
||||
qcom,rx-port-mapping = <1 2 3 4 5 6>;
|
||||
};
|
||||
};
|
||||
|
||||
soundwire@3230000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x03230000 0x2000>;
|
||||
wcd938x_tx: codec@0,3 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 3>;
|
||||
qcom,tx-port-mapping = <2 3 4 5>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -0,0 +1,95 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Common properties for Qualcomm WCD93xx Audio Codec
|
||||
|
||||
maintainers:
|
||||
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
||||
|
||||
properties:
|
||||
reset-gpios:
|
||||
description: GPIO spec for reset line to use
|
||||
maxItems: 1
|
||||
|
||||
vdd-buck-supply:
|
||||
description: A reference to the 1.8V buck supply
|
||||
|
||||
vdd-rxtx-supply:
|
||||
description: A reference to the 1.8V rx supply
|
||||
|
||||
vdd-io-supply:
|
||||
description: A reference to the 1.8V I/O supply
|
||||
|
||||
vdd-mic-bias-supply:
|
||||
description: A reference to the 3.8V mic bias supply
|
||||
|
||||
qcom,tx-device:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: A reference to Soundwire tx device phandle
|
||||
|
||||
qcom,rx-device:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: A reference to Soundwire rx device phandle
|
||||
|
||||
qcom,micbias1-microvolt:
|
||||
description: micbias1 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias2-microvolt:
|
||||
description: micbias2 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias3-microvolt:
|
||||
description: micbias3 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,micbias4-microvolt:
|
||||
description: micbias4 voltage
|
||||
minimum: 1800000
|
||||
maximum: 2850000
|
||||
|
||||
qcom,hphl-jack-type-normally-closed:
|
||||
description: Indicates that HPHL jack switch type is normally closed
|
||||
type: boolean
|
||||
|
||||
qcom,ground-jack-type-normally-closed:
|
||||
description: Indicates that Headset Ground switch type is normally closed
|
||||
type: boolean
|
||||
|
||||
qcom,mbhc-headset-vthreshold-microvolt:
|
||||
description: Voltage threshold value for headset detection
|
||||
minimum: 0
|
||||
maximum: 2850000
|
||||
|
||||
qcom,mbhc-headphone-vthreshold-microvolt:
|
||||
description: Voltage threshold value for headphone detection
|
||||
minimum: 0
|
||||
maximum: 2850000
|
||||
|
||||
qcom,mbhc-buttons-vthreshold-microvolt:
|
||||
description:
|
||||
Array of 8 Voltage threshold values corresponding to headset
|
||||
button0 - button7
|
||||
minItems: 8
|
||||
maxItems: 8
|
||||
|
||||
'#sound-dai-cells':
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- reset-gpios
|
||||
- qcom,tx-device
|
||||
- qcom,rx-device
|
||||
- qcom,micbias1-microvolt
|
||||
- qcom,micbias2-microvolt
|
||||
- qcom,micbias3-microvolt
|
||||
- qcom,micbias4-microvolt
|
||||
- "#sound-dai-cells"
|
||||
|
||||
additionalProperties: true
|
||||
|
|
@ -28,6 +28,10 @@ properties:
|
|||
description: Powerdown/Shutdown line to use (pin SD_N)
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
description: Powerdown/Shutdown line to use (pin SD_N)
|
||||
maxItems: 1
|
||||
|
||||
'#sound-dai-cells':
|
||||
const: 0
|
||||
|
||||
|
|
@ -37,11 +41,16 @@ properties:
|
|||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- powerdown-gpios
|
||||
- '#sound-dai-cells'
|
||||
- vdd-1p8-supply
|
||||
- vdd-io-supply
|
||||
|
||||
oneOf:
|
||||
- required:
|
||||
- powerdown-gpios
|
||||
- required:
|
||||
- reset-gpios
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
|
|
|
|||
41
Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
Normal file
41
Documentation/devicetree/bindings/sound/realtek,rt1015.yaml
Normal file
|
|
@ -0,0 +1,41 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: RT1015 Mono Class D Audio Amplifier
|
||||
|
||||
maintainers:
|
||||
- Jack Yu <jack.yu@realtek.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- realtek,rt1015
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
realtek,power-up-delay-ms:
|
||||
description: Set a delay time for flush work to be completed,
|
||||
this vlaue is adjustable depending on platform.
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
codec@28 {
|
||||
compatible = "realtek,rt1015";
|
||||
reg = <0x28>;
|
||||
realtek,power-up-delay-ms = <50>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
RT1015 Mono Class D Audio Amplifier
|
||||
|
||||
This device supports I2C only.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : "realtek,rt1015".
|
||||
|
||||
- reg : The I2C address of the device.
|
||||
|
||||
Optional properties:
|
||||
|
||||
- realtek,power-up-delay-ms
|
||||
Set a delay time for flush work to be completed,
|
||||
this value is adjustable depending on platform.
|
||||
|
||||
Example:
|
||||
|
||||
rt1015: codec@28 {
|
||||
compatible = "realtek,rt1015";
|
||||
reg = <0x28>;
|
||||
realtek,power-up-delay-ms = <50>;
|
||||
};
|
||||
|
|
@ -25,8 +25,11 @@ properties:
|
|||
description: Phandles to the codecs.
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
items:
|
||||
- description: Phandle to the WM5110 audio codec.
|
||||
- description: Phandle to the HDMI transmitter node.
|
||||
- items:
|
||||
- description: Phandle to the WM5110 audio codec.
|
||||
- items:
|
||||
- description: Phandle to the HDMI transmitter node.
|
||||
|
||||
|
||||
samsung,audio-routing:
|
||||
description: |
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ properties:
|
|||
|
||||
resets:
|
||||
description: Reset controller to reset the TPM
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
description: Output GPIO pin to reset the TPM
|
||||
|
|
|
|||
|
|
@ -55,9 +55,12 @@ properties:
|
|||
|
||||
samsung,sysreg:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: Should be phandle/offset pair. The phandle to the syscon node
|
||||
which indicates the FSYSx sysreg interface and the offset of
|
||||
the control register for UFS io coherency setting.
|
||||
items:
|
||||
- items:
|
||||
- description: phandle to FSYSx sysreg node
|
||||
- description: offset of the control register for UFS io coherency setting
|
||||
description:
|
||||
Phandle and offset to the FSYSx sysreg for UFS io coherency setting.
|
||||
|
||||
dma-coherent: true
|
||||
|
||||
|
|
|
|||
|
|
@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Xilinx SuperSpeed DWC3 USB SoC controller
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -16,8 +16,9 @@ description:
|
|||
USB 2.0 traffic.
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Michal Simek <michal.simek@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: Xilinx udc controller
|
||||
|
||||
maintainers:
|
||||
- Piyush Mehta <piyush.mehta@amd.com>
|
||||
- Mubin Sayyed <mubin.sayyed@amd.com>
|
||||
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -16,13 +16,13 @@
|
|||
# that are possible for CORE. So for example if CORE_BELL_A_ADVANCED is 'y',
|
||||
# CORE must be 'y' too.
|
||||
#
|
||||
# * What influences CORE_BELL_A_ADVANCED ?
|
||||
# * What influences CORE_BELL_A_ADVANCED?
|
||||
#
|
||||
# As the name implies CORE_BELL_A_ADVANCED is an advanced feature of
|
||||
# CORE_BELL_A so naturally it depends on CORE_BELL_A. So if CORE_BELL_A is 'y'
|
||||
# we know CORE_BELL_A_ADVANCED can be 'y' too.
|
||||
#
|
||||
# * What influences CORE_BELL_A ?
|
||||
# * What influences CORE_BELL_A?
|
||||
#
|
||||
# CORE_BELL_A depends on CORE, so CORE influences CORE_BELL_A.
|
||||
#
|
||||
|
|
@ -34,7 +34,7 @@
|
|||
# the "recursive dependency detected" error.
|
||||
#
|
||||
# Reading the Documentation/kbuild/Kconfig.recursion-issue-01 file it may be
|
||||
# obvious that an easy to solution to this problem should just be the removal
|
||||
# obvious that an easy solution to this problem should just be the removal
|
||||
# of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already
|
||||
# since CORE_BELL_A depends on CORE. Recursive dependency issues are not always
|
||||
# so trivial to resolve, we provide another example below of practical
|
||||
|
|
|
|||
|
|
@ -384,8 +384,6 @@ operations:
|
|||
- type
|
||||
|
||||
dump:
|
||||
pre: dpll-lock-dumpit
|
||||
post: dpll-unlock-dumpit
|
||||
reply: *dev-attrs
|
||||
|
||||
-
|
||||
|
|
@ -473,8 +471,6 @@ operations:
|
|||
- fractional-frequency-offset
|
||||
|
||||
dump:
|
||||
pre: dpll-lock-dumpit
|
||||
post: dpll-unlock-dumpit
|
||||
request:
|
||||
attributes:
|
||||
- id
|
||||
|
|
|
|||
|
|
@ -942,6 +942,10 @@ attribute-sets:
|
|||
-
|
||||
name: gro-ipv4-max-size
|
||||
type: u32
|
||||
-
|
||||
name: dpll-pin
|
||||
type: nest
|
||||
nested-attributes: link-dpll-pin-attrs
|
||||
-
|
||||
name: af-spec-attrs
|
||||
attributes:
|
||||
|
|
@ -1627,6 +1631,12 @@ attribute-sets:
|
|||
-
|
||||
name: used
|
||||
type: u8
|
||||
-
|
||||
name: link-dpll-pin-attrs
|
||||
attributes:
|
||||
-
|
||||
name: id
|
||||
type: u32
|
||||
|
||||
sub-messages:
|
||||
-
|
||||
|
|
|
|||
|
|
@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using
|
|||
`devlink port function set roce` command.
|
||||
|
||||
Users may also set the function as migratable using
|
||||
'devlink port function set migratable' command.
|
||||
`devlink port function set migratable` command.
|
||||
|
||||
Users may also set the IPsec crypto capability of the function using
|
||||
`devlink port function set ipsec_crypto` command.
|
||||
|
|
|
|||
|
|
@ -136,8 +136,8 @@ struct_netpoll_info* npinfo -
|
|||
possible_net_t nd_net - read_mostly (dev_net)napi_busy_loop,tcp_v(4/6)_rcv,ip(v6)_rcv,ip(6)_input,ip(6)_input_finish
|
||||
void* ml_priv
|
||||
enum_netdev_ml_priv_type ml_priv_type
|
||||
struct_pcpu_lstats__percpu* lstats
|
||||
struct_pcpu_sw_netstats__percpu* tstats
|
||||
struct_pcpu_lstats__percpu* lstats read_mostly dev_lstats_add()
|
||||
struct_pcpu_sw_netstats__percpu* tstats read_mostly dev_sw_netstats_tx_add()
|
||||
struct_pcpu_dstats__percpu* dstats
|
||||
struct_garp_port* garp_port
|
||||
struct_mrp_port* mrp_port
|
||||
|
|
|
|||
|
|
@ -38,13 +38,13 @@ u32 max_window read_mostly -
|
|||
u32 mss_cache read_mostly read_mostly tcp_rate_check_app_limited,tcp_current_mss,tcp_sync_mss,tcp_sndbuf_expand,tcp_tso_should_defer(tx);tcp_update_pacing_rate,tcp_clean_rtx_queue(rx)
|
||||
u32 window_clamp read_mostly read_write tcp_rcv_space_adjust,__tcp_select_window
|
||||
u32 rcv_ssthresh read_mostly - __tcp_select_window
|
||||
u82 scaling_ratio
|
||||
u8 scaling_ratio read_mostly read_mostly tcp_win_from_space
|
||||
struct tcp_rack
|
||||
u16 advmss - read_mostly tcp_rcv_space_adjust
|
||||
u8 compressed_ack
|
||||
u8:2 dup_ack_counter
|
||||
u8:1 tlp_retrans
|
||||
u8:1 tcp_usec_ts
|
||||
u8:1 tcp_usec_ts read_mostly read_mostly
|
||||
u32 chrono_start read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
|
||||
u32[3] chrono_stat read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
|
||||
u8:2 chrono_type read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data)
|
||||
|
|
|
|||
121
Documentation/process/cve.rst
Normal file
121
Documentation/process/cve.rst
Normal file
|
|
@ -0,0 +1,121 @@
|
|||
====
|
||||
CVEs
|
||||
====
|
||||
|
||||
Common Vulnerabilities and Exposure (CVE®) numbers were developed as an
|
||||
unambiguous way to identify, define, and catalog publicly disclosed
|
||||
security vulnerabilities. Over time, their usefulness has declined with
|
||||
regards to the kernel project, and CVE numbers were very often assigned
|
||||
in inappropriate ways and for inappropriate reasons. Because of this,
|
||||
the kernel development community has tended to avoid them. However, the
|
||||
combination of continuing pressure to assign CVEs and other forms of
|
||||
security identifiers, and ongoing abuses by individuals and companies
|
||||
outside of the kernel community has made it clear that the kernel
|
||||
community should have control over those assignments.
|
||||
|
||||
The Linux kernel developer team does have the ability to assign CVEs for
|
||||
potential Linux kernel security issues. This assignment is independent
|
||||
of the :doc:`normal Linux kernel security bug reporting
|
||||
process<../process/security-bugs>`.
|
||||
|
||||
A list of all assigned CVEs for the Linux kernel can be found in the
|
||||
archives of the linux-cve mailing list, as seen on
|
||||
https://lore.kernel.org/linux-cve-announce/. To get notice of the
|
||||
assigned CVEs, please `subscribe
|
||||
<https://subspace.kernel.org/subscribing.html>`_ to that mailing list.
|
||||
|
||||
Process
|
||||
=======
|
||||
|
||||
As part of the normal stable release process, kernel changes that are
|
||||
potentially security issues are identified by the developers responsible
|
||||
for CVE number assignments and have CVE numbers automatically assigned
|
||||
to them. These assignments are published on the linux-cve-announce
|
||||
mailing list as announcements on a frequent basis.
|
||||
|
||||
Note, due to the layer at which the Linux kernel is in a system, almost
|
||||
any bug might be exploitable to compromise the security of the kernel,
|
||||
but the possibility of exploitation is often not evident when the bug is
|
||||
fixed. Because of this, the CVE assignment team is overly cautious and
|
||||
assign CVE numbers to any bugfix that they identify. This
|
||||
explains the seemingly large number of CVEs that are issued by the Linux
|
||||
kernel team.
|
||||
|
||||
If the CVE assignment team misses a specific fix that any user feels
|
||||
should have a CVE assigned to it, please email them at <cve@kernel.org>
|
||||
and the team there will work with you on it. Note that no potential
|
||||
security issues should be sent to this alias, it is ONLY for assignment
|
||||
of CVEs for fixes that are already in released kernel trees. If you
|
||||
feel you have found an unfixed security issue, please follow the
|
||||
:doc:`normal Linux kernel security bug reporting
|
||||
process<../process/security-bugs>`.
|
||||
|
||||
No CVEs will be automatically assigned for unfixed security issues in
|
||||
the Linux kernel; assignment will only automatically happen after a fix
|
||||
is available and applied to a stable kernel tree, and it will be tracked
|
||||
that way by the git commit id of the original fix. If anyone wishes to
|
||||
have a CVE assigned before an issue is resolved with a commit, please
|
||||
contact the kernel CVE assignment team at <cve@kernel.org> to get an
|
||||
identifier assigned from their batch of reserved identifiers.
|
||||
|
||||
No CVEs will be assigned for any issue found in a version of the kernel
|
||||
that is not currently being actively supported by the Stable/LTS kernel
|
||||
team. A list of the currently supported kernel branches can be found at
|
||||
https://kernel.org/releases.html
|
||||
|
||||
Disputes of assigned CVEs
|
||||
=========================
|
||||
|
||||
The authority to dispute or modify an assigned CVE for a specific kernel
|
||||
change lies solely with the maintainers of the relevant subsystem
|
||||
affected. This principle ensures a high degree of accuracy and
|
||||
accountability in vulnerability reporting. Only those individuals with
|
||||
deep expertise and intimate knowledge of the subsystem can effectively
|
||||
assess the validity and scope of a reported vulnerability and determine
|
||||
its appropriate CVE designation. Any attempt to modify or dispute a CVE
|
||||
outside of this designated authority could lead to confusion, inaccurate
|
||||
reporting, and ultimately, compromised systems.
|
||||
|
||||
Invalid CVEs
|
||||
============
|
||||
|
||||
If a security issue is found in a Linux kernel that is only supported by
|
||||
a Linux distribution due to the changes that have been made by that
|
||||
distribution, or due to the distribution supporting a kernel version
|
||||
that is no longer one of the kernel.org supported releases, then a CVE
|
||||
can not be assigned by the Linux kernel CVE team, and must be asked for
|
||||
from that Linux distribution itself.
|
||||
|
||||
Any CVE that is assigned against the Linux kernel for an actively
|
||||
supported kernel version, by any group other than the kernel assignment
|
||||
CVE team should not be treated as a valid CVE. Please notify the
|
||||
kernel CVE assignment team at <cve@kernel.org> so that they can work to
|
||||
invalidate such entries through the CNA remediation process.
|
||||
|
||||
Applicability of specific CVEs
|
||||
==============================
|
||||
|
||||
As the Linux kernel can be used in many different ways, with many
|
||||
different ways of accessing it by external users, or no access at all,
|
||||
the applicability of any specific CVE is up to the user of Linux to
|
||||
determine, it is not up to the CVE assignment team. Please do not
|
||||
contact us to attempt to determine the applicability of any specific
|
||||
CVE.
|
||||
|
||||
Also, as the source tree is so large, and any one system only uses a
|
||||
small subset of the source tree, any users of Linux should be aware that
|
||||
large numbers of assigned CVEs are not relevant for their systems.
|
||||
|
||||
In short, we do not know your use case, and we do not know what portions
|
||||
of the kernel that you use, so there is no way for us to determine if a
|
||||
specific CVE is relevant for your system.
|
||||
|
||||
As always, it is best to take all released kernel changes, as they are
|
||||
tested together in a unified whole by many community members, and not as
|
||||
individual cherry-picked changes. Also note that for many bugs, the
|
||||
solution to the overall problem is not found in a single change, but by
|
||||
the sum of many fixes on top of each other. Ideally CVEs will be
|
||||
assigned to all fixes for all issues, but sometimes we will fail to
|
||||
notice fixes, therefore assume that some changes without a CVE assigned
|
||||
might be relevant to take.
|
||||
|
||||
|
|
@ -81,6 +81,7 @@ of special classes of bugs: regressions and security problems.
|
|||
|
||||
handling-regressions
|
||||
security-bugs
|
||||
cve
|
||||
embargoed-hardware-issues
|
||||
|
||||
Maintainer information
|
||||
|
|
|
|||
|
|
@ -99,9 +99,8 @@ CVE assignment
|
|||
The security team does not assign CVEs, nor do we require them for
|
||||
reports or fixes, as this can needlessly complicate the process and may
|
||||
delay the bug handling. If a reporter wishes to have a CVE identifier
|
||||
assigned, they should find one by themselves, for example by contacting
|
||||
MITRE directly. However under no circumstances will a patch inclusion
|
||||
be delayed to wait for a CVE identifier to arrive.
|
||||
assigned for a confirmed issue, they can contact the :doc:`kernel CVE
|
||||
assignment team<../process/cve>` to obtain one.
|
||||
|
||||
Non-disclosure agreements
|
||||
-------------------------
|
||||
|
|
|
|||
|
|
@ -109,7 +109,7 @@ class KernelFeat(Directive):
|
|||
else:
|
||||
out_lines += line + "\n"
|
||||
|
||||
nodeList = self.nestedParse(out_lines, fname)
|
||||
nodeList = self.nestedParse(out_lines, self.arguments[0])
|
||||
return nodeList
|
||||
|
||||
def nestedParse(self, lines, fname):
|
||||
|
|
|
|||
|
|
@ -448,17 +448,17 @@ Function-specific configfs interface
|
|||
The function name to use when creating the function directory is "ncm".
|
||||
The NCM function provides these attributes in its function directory:
|
||||
|
||||
=============== ==================================================
|
||||
ifname network device interface name associated with this
|
||||
function instance
|
||||
qmult queue length multiplier for high and super speed
|
||||
host_addr MAC address of host's end of this
|
||||
Ethernet over USB link
|
||||
dev_addr MAC address of device's end of this
|
||||
Ethernet over USB link
|
||||
max_segment_size Segment size required for P2P connections. This
|
||||
will set MTU to (max_segment_size - 14 bytes)
|
||||
=============== ==================================================
|
||||
======================= ==================================================
|
||||
ifname network device interface name associated with this
|
||||
function instance
|
||||
qmult queue length multiplier for high and super speed
|
||||
host_addr MAC address of host's end of this
|
||||
Ethernet over USB link
|
||||
dev_addr MAC address of device's end of this
|
||||
Ethernet over USB link
|
||||
max_segment_size Segment size required for P2P connections. This
|
||||
will set MTU to 14 bytes
|
||||
======================= ==================================================
|
||||
|
||||
and after creating the functions/ncm.<instance name> they contain default
|
||||
values: qmult is 5, dev_addr and host_addr are randomly selected.
|
||||
|
|
|
|||
55
MAINTAINERS
55
MAINTAINERS
|
|
@ -4169,14 +4169,14 @@ F: drivers/firmware/broadcom/tee_bnxt_fw.c
|
|||
F: drivers/net/ethernet/broadcom/bnxt/
|
||||
F: include/linux/firmware/broadcom/tee_bnxt_fw.h
|
||||
|
||||
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
|
||||
M: Arend van Spriel <aspriel@gmail.com>
|
||||
M: Franky Lin <franky.lin@broadcom.com>
|
||||
M: Hante Meuleman <hante.meuleman@broadcom.com>
|
||||
BROADCOM BRCM80211 IEEE802.11 WIRELESS DRIVERS
|
||||
M: Arend van Spriel <arend.vanspriel@broadcom.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
L: brcm80211@lists.linux.dev
|
||||
L: brcm80211-dev-list.pdl@broadcom.com
|
||||
S: Supported
|
||||
F: drivers/net/wireless/broadcom/brcm80211/
|
||||
F: include/linux/platform_data/brcmfmac.h
|
||||
|
||||
BROADCOM BRCMSTB GPIO DRIVER
|
||||
M: Doug Berger <opendmb@gmail.com>
|
||||
|
|
@ -5611,6 +5611,11 @@ S: Maintained
|
|||
F: Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
|
||||
F: drivers/net/can/ctucanfd/
|
||||
|
||||
CVE ASSIGNMENT CONTACT
|
||||
M: CVE Assignment Team <cve@kernel.org>
|
||||
S: Maintained
|
||||
F: Documentation/process/cve.rst
|
||||
|
||||
CW1200 WLAN driver
|
||||
S: Orphan
|
||||
F: drivers/net/wireless/st/cw1200/
|
||||
|
|
@ -10092,7 +10097,7 @@ L: linux-i2c@vger.kernel.org
|
|||
S: Maintained
|
||||
W: https://i2c.wiki.kernel.org/
|
||||
Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git
|
||||
F: Documentation/devicetree/bindings/i2c/
|
||||
F: drivers/i2c/algos/
|
||||
F: drivers/i2c/busses/
|
||||
|
|
@ -10284,7 +10289,7 @@ F: drivers/scsi/ibmvscsi/ibmvscsi*
|
|||
F: include/scsi/viosrp.h
|
||||
|
||||
IBM Power Virtual SCSI Device Target Driver
|
||||
M: Michael Cyr <mikecyr@linux.ibm.com>
|
||||
M: Tyrel Datwyler <tyreld@linux.ibm.com>
|
||||
L: linux-scsi@vger.kernel.org
|
||||
L: target-devel@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -10802,11 +10807,11 @@ F: drivers/gpio/gpio-tangier.h
|
|||
|
||||
INTEL GVT-g DRIVERS (Intel GPU Virtualization)
|
||||
M: Zhenyu Wang <zhenyuw@linux.intel.com>
|
||||
M: Zhi Wang <zhi.a.wang@intel.com>
|
||||
M: Zhi Wang <zhi.wang.linux@gmail.com>
|
||||
L: intel-gvt-dev@lists.freedesktop.org
|
||||
L: intel-gfx@lists.freedesktop.org
|
||||
S: Supported
|
||||
W: https://01.org/igvt-g
|
||||
W: https://github.com/intel/gvt-linux/wiki
|
||||
T: git https://github.com/intel/gvt-linux.git
|
||||
F: drivers/gpu/drm/i915/gvt/
|
||||
|
||||
|
|
@ -11128,7 +11133,6 @@ S: Supported
|
|||
F: drivers/net/wireless/intel/iwlegacy/
|
||||
|
||||
INTEL WIRELESS WIFI LINK (iwlwifi)
|
||||
M: Gregory Greenman <gregory.greenman@intel.com>
|
||||
M: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
||||
L: linux-wireless@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -11726,6 +11730,7 @@ F: fs/smb/server/
|
|||
KERNEL UNIT TESTING FRAMEWORK (KUnit)
|
||||
M: Brendan Higgins <brendanhiggins@google.com>
|
||||
M: David Gow <davidgow@google.com>
|
||||
R: Rae Moar <rmoar@google.com>
|
||||
L: linux-kselftest@vger.kernel.org
|
||||
L: kunit-dev@googlegroups.com
|
||||
S: Maintained
|
||||
|
|
@ -12904,6 +12909,8 @@ M: Alejandro Colomar <alx@kernel.org>
|
|||
L: linux-man@vger.kernel.org
|
||||
S: Maintained
|
||||
W: http://www.kernel.org/doc/man-pages
|
||||
T: git git://git.kernel.org/pub/scm/docs/man-pages/man-pages.git
|
||||
T: git git://www.alejandro-colomar.es/src/alx/linux/man-pages/man-pages.git
|
||||
|
||||
MANAGEMENT COMPONENT TRANSPORT PROTOCOL (MCTP)
|
||||
M: Jeremy Kerr <jk@codeconstruct.com.au>
|
||||
|
|
@ -15179,6 +15186,7 @@ F: Documentation/networking/net_cachelines/net_device.rst
|
|||
F: drivers/connector/
|
||||
F: drivers/net/
|
||||
F: include/dt-bindings/net/
|
||||
F: include/linux/cn_proc.h
|
||||
F: include/linux/etherdevice.h
|
||||
F: include/linux/fcdevice.h
|
||||
F: include/linux/fddidevice.h
|
||||
|
|
@ -15186,6 +15194,7 @@ F: include/linux/hippidevice.h
|
|||
F: include/linux/if_*
|
||||
F: include/linux/inetdevice.h
|
||||
F: include/linux/netdevice.h
|
||||
F: include/uapi/linux/cn_proc.h
|
||||
F: include/uapi/linux/if_*
|
||||
F: include/uapi/linux/netdevice.h
|
||||
X: drivers/net/wireless/
|
||||
|
|
@ -15321,7 +15330,7 @@ K: \bmdo_
|
|||
NETWORKING [MPTCP]
|
||||
M: Matthieu Baerts <matttbe@kernel.org>
|
||||
M: Mat Martineau <martineau@kernel.org>
|
||||
R: Geliang Tang <geliang.tang@linux.dev>
|
||||
R: Geliang Tang <geliang@kernel.org>
|
||||
L: netdev@vger.kernel.org
|
||||
L: mptcp@lists.linux.dev
|
||||
S: Maintained
|
||||
|
|
@ -16834,6 +16843,7 @@ F: drivers/pci/controller/dwc/*designware*
|
|||
|
||||
PCI DRIVER FOR TI DRA7XX/J721E
|
||||
M: Vignesh Raghavendra <vigneshr@ti.com>
|
||||
R: Siddharth Vadapalli <s-vadapalli@ti.com>
|
||||
L: linux-omap@vger.kernel.org
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
@ -16858,9 +16868,8 @@ F: Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
|
|||
F: drivers/pci/controller/pcie-xilinx-cpm.c
|
||||
|
||||
PCI ENDPOINT SUBSYSTEM
|
||||
M: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
||||
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
M: Krzysztof Wilczyński <kw@linux.com>
|
||||
R: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
R: Kishon Vijay Abraham I <kishon@kernel.org>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
@ -17180,7 +17189,7 @@ R: John Garry <john.g.garry@oracle.com>
|
|||
R: Will Deacon <will@kernel.org>
|
||||
R: James Clark <james.clark@arm.com>
|
||||
R: Mike Leach <mike.leach@linaro.org>
|
||||
R: Leo Yan <leo.yan@linaro.org>
|
||||
R: Leo Yan <leo.yan@linux.dev>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: tools/build/feature/test-libopencsd.c
|
||||
|
|
@ -18083,7 +18092,6 @@ F: drivers/net/ethernet/qualcomm/emac/
|
|||
|
||||
QUALCOMM ETHQOS ETHERNET DRIVER
|
||||
M: Vinod Koul <vkoul@kernel.org>
|
||||
R: Bhupesh Sharma <bhupesh.sharma@linaro.org>
|
||||
L: netdev@vger.kernel.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
|
|
@ -18430,7 +18438,7 @@ S: Supported
|
|||
F: drivers/infiniband/sw/rdmavt
|
||||
|
||||
RDS - RELIABLE DATAGRAM SOCKETS
|
||||
M: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
||||
M: Allison Henderson <allison.henderson@oracle.com>
|
||||
L: netdev@vger.kernel.org
|
||||
L: linux-rdma@vger.kernel.org
|
||||
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
|
||||
|
|
@ -22014,6 +22022,14 @@ F: Documentation/devicetree/bindings/media/i2c/ti,ds90*
|
|||
F: drivers/media/i2c/ds90*
|
||||
F: include/media/i2c/ds90*
|
||||
|
||||
TI HDC302X HUMIDITY DRIVER
|
||||
M: Javier Carrasco <javier.carrasco.cruz@gmail.com>
|
||||
M: Li peiyu <579lpy@gmail.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
|
||||
F: drivers/iio/humidity/hdc3020.c
|
||||
|
||||
TI ICSSG ETHERNET DRIVER (ICSSG)
|
||||
R: MD Danish Anwar <danishanwar@ti.com>
|
||||
R: Roger Quadros <rogerq@kernel.org>
|
||||
|
|
@ -24348,13 +24364,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git
|
|||
F: Documentation/filesystems/zonefs.rst
|
||||
F: fs/zonefs/
|
||||
|
||||
ZPOOL COMPRESSED PAGE STORAGE API
|
||||
M: Dan Streetman <ddstreet@ieee.org>
|
||||
L: linux-mm@kvack.org
|
||||
S: Maintained
|
||||
F: include/linux/zpool.h
|
||||
F: mm/zpool.c
|
||||
|
||||
ZR36067 VIDEO FOR LINUX DRIVER
|
||||
M: Corentin Labbe <clabbe@baylibre.com>
|
||||
L: mjpeg-users@lists.sourceforge.net
|
||||
|
|
@ -24406,7 +24415,9 @@ M: Nhat Pham <nphamcs@gmail.com>
|
|||
L: linux-mm@kvack.org
|
||||
S: Maintained
|
||||
F: Documentation/admin-guide/mm/zswap.rst
|
||||
F: include/linux/zpool.h
|
||||
F: include/linux/zswap.h
|
||||
F: mm/zpool.c
|
||||
F: mm/zswap.c
|
||||
|
||||
THE REST
|
||||
|
|
|
|||
16
Makefile
16
Makefile
|
|
@ -2,7 +2,7 @@
|
|||
VERSION = 6
|
||||
PATCHLEVEL = 8
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc5
|
||||
NAME = Hurr durr I'ma ninja sloth
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
@ -294,15 +294,15 @@ may-sync-config := 1
|
|||
single-build :=
|
||||
|
||||
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
||||
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
||||
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
|
||||
need-config :=
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
|
||||
ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
|
||||
ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
|
||||
may-sync-config :=
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
need-compiler := $(may-sync-config)
|
||||
|
|
@ -323,9 +323,9 @@ endif
|
|||
# We cannot build single targets and the others at the same time
|
||||
ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
|
||||
single-build := 1
|
||||
ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
|
||||
ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
|
||||
mixed-build := 1
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
# For "make -j clean all", "make -j mrproper defconfig all", etc.
|
||||
|
|
@ -1666,7 +1666,7 @@ help:
|
|||
@echo ' (sparse by default)'
|
||||
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
|
||||
@echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
|
||||
@echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where'
|
||||
@echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where'
|
||||
@echo ' 1: warnings which may be relevant and do not occur too often'
|
||||
@echo ' 2: warnings which occur quite often but may still be relevant'
|
||||
@echo ' 3: more obscure warnings, can most likely be ignored'
|
||||
|
|
|
|||
|
|
@ -673,6 +673,7 @@ config SHADOW_CALL_STACK
|
|||
bool "Shadow Call Stack"
|
||||
depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
|
||||
depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
|
||||
depends on MMU
|
||||
help
|
||||
This option enables the compiler's Shadow Call Stack, which
|
||||
uses a shadow stack to protect function return addresses from
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
static __always_inline bool arch_static_branch(struct static_key *key,
|
||||
bool branch)
|
||||
{
|
||||
asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
|
||||
asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
|
||||
"1: \n"
|
||||
"nop \n"
|
||||
".pushsection __jump_table, \"aw\" \n"
|
||||
|
|
@ -47,7 +47,7 @@ static __always_inline bool arch_static_branch(struct static_key *key,
|
|||
static __always_inline bool arch_static_branch_jump(struct static_key *key,
|
||||
bool branch)
|
||||
{
|
||||
asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
|
||||
asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n"
|
||||
"1: \n"
|
||||
"b %l[l_yes] \n"
|
||||
".pushsection __jump_table, \"aw\" \n"
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@
|
|||
|
||||
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\n\t"
|
||||
asm goto("1:\n\t"
|
||||
WASM(nop) "\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
".word 1b, %l[l_yes], %c0\n\t"
|
||||
|
|
@ -25,7 +25,7 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran
|
|||
|
||||
static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\n\t"
|
||||
asm goto("1:\n\t"
|
||||
WASM(b) " %l[l_yes]\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
".word 1b, %l[l_yes], %c0\n\t"
|
||||
|
|
|
|||
|
|
@ -298,6 +298,8 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
|
|||
goto done;
|
||||
}
|
||||
count_vm_vma_lock_event(VMA_LOCK_RETRY);
|
||||
if (fault & VM_FAULT_MAJOR)
|
||||
flags |= FAULT_FLAG_TRIED;
|
||||
|
||||
/* Quick path to respond to signals */
|
||||
if (fault_signal_pending(fault, regs)) {
|
||||
|
|
|
|||
|
|
@ -195,7 +195,7 @@ vdso_prepare: prepare0
|
|||
include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
|
||||
ifdef CONFIG_COMPAT_VDSO
|
||||
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
|
||||
include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
|
||||
arch/arm64/kernel/vdso32/vdso.so
|
||||
endif
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -229,7 +229,7 @@ alternative_has_cap_likely(const unsigned long cpucap)
|
|||
if (!cpucap_is_possible(cpucap))
|
||||
return false;
|
||||
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
ALTERNATIVE_CB("b %l[l_no]", %[cpucap], alt_cb_patch_nops)
|
||||
:
|
||||
: [cpucap] "i" (cpucap)
|
||||
|
|
@ -247,7 +247,7 @@ alternative_has_cap_unlikely(const unsigned long cpucap)
|
|||
if (!cpucap_is_possible(cpucap))
|
||||
return false;
|
||||
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
ALTERNATIVE("nop", "b %l[l_yes]", %[cpucap])
|
||||
:
|
||||
: [cpucap] "i" (cpucap)
|
||||
|
|
|
|||
|
|
@ -83,7 +83,7 @@ struct arm64_ftr_bits {
|
|||
* to full-0 denotes that this field has no override
|
||||
*
|
||||
* A @mask field set to full-0 with the corresponding @val field set
|
||||
* to full-1 denotes thath this field has an invalid override.
|
||||
* to full-1 denotes that this field has an invalid override.
|
||||
*/
|
||||
struct arm64_ftr_override {
|
||||
u64 val;
|
||||
|
|
|
|||
|
|
@ -61,6 +61,7 @@
|
|||
#define ARM_CPU_IMP_HISI 0x48
|
||||
#define ARM_CPU_IMP_APPLE 0x61
|
||||
#define ARM_CPU_IMP_AMPERE 0xC0
|
||||
#define ARM_CPU_IMP_MICROSOFT 0x6D
|
||||
|
||||
#define ARM_CPU_PART_AEM_V8 0xD0F
|
||||
#define ARM_CPU_PART_FOUNDATION 0xD00
|
||||
|
|
@ -135,6 +136,8 @@
|
|||
|
||||
#define AMPERE_CPU_PART_AMPERE1 0xAC3
|
||||
|
||||
#define MICROSOFT_CPU_PART_AZURE_COBALT_100 0xD49 /* Based on r0p0 of ARM Neoverse N2 */
|
||||
|
||||
#define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
|
||||
#define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
|
||||
#define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
|
||||
|
|
@ -193,6 +196,7 @@
|
|||
#define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
|
||||
#define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
|
||||
#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
|
||||
#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100)
|
||||
|
||||
/* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
|
||||
#define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX
|
||||
|
|
|
|||
|
|
@ -62,13 +62,13 @@ static inline void cpacr_restore(unsigned long cpacr)
|
|||
* When we defined the maximum SVE vector length we defined the ABI so
|
||||
* that the maximum vector length included all the reserved for future
|
||||
* expansion bits in ZCR rather than those just currently defined by
|
||||
* the architecture. While SME follows a similar pattern the fact that
|
||||
* it includes a square matrix means that any allocations that attempt
|
||||
* to cover the maximum potential vector length (such as happen with
|
||||
* the regset used for ptrace) end up being extremely large. Define
|
||||
* the much lower actual limit for use in such situations.
|
||||
* the architecture. Using this length to allocate worst size buffers
|
||||
* results in excessively large allocations, and this effect is even
|
||||
* more pronounced for SME due to ZA. Define more suitable VLs for
|
||||
* these situations.
|
||||
*/
|
||||
#define SME_VQ_MAX 16
|
||||
#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
|
||||
#define SME_VQ_MAX ((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
|
||||
|
||||
struct task_struct;
|
||||
|
||||
|
|
|
|||
|
|
@ -15,17 +15,21 @@
|
|||
|
||||
#define JUMP_LABEL_NOP_SIZE AARCH64_INSN_SIZE
|
||||
|
||||
/*
|
||||
* Prefer the constraint "S" to support PIC with GCC. Clang before 19 does not
|
||||
* support "S" on a symbol with a constant offset, so we use "i" as a fallback.
|
||||
*/
|
||||
static __always_inline bool arch_static_branch(struct static_key * const key,
|
||||
const bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: nop \n\t"
|
||||
" .pushsection __jump_table, \"aw\" \n\t"
|
||||
" .align 3 \n\t"
|
||||
" .long 1b - ., %l[l_yes] - . \n\t"
|
||||
" .quad %c0 - . \n\t"
|
||||
" .quad (%[key] - .) + %[bit0] \n\t"
|
||||
" .popsection \n\t"
|
||||
: : "i"(&((char *)key)[branch]) : : l_yes);
|
||||
: : [key]"Si"(key), [bit0]"i"(branch) : : l_yes);
|
||||
|
||||
return false;
|
||||
l_yes:
|
||||
|
|
@ -35,14 +39,14 @@ static __always_inline bool arch_static_branch(struct static_key * const key,
|
|||
static __always_inline bool arch_static_branch_jump(struct static_key * const key,
|
||||
const bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: b %l[l_yes] \n\t"
|
||||
" .pushsection __jump_table, \"aw\" \n\t"
|
||||
" .align 3 \n\t"
|
||||
" .long 1b - ., %l[l_yes] - . \n\t"
|
||||
" .quad %c0 - . \n\t"
|
||||
" .quad (%[key] - .) + %[bit0] \n\t"
|
||||
" .popsection \n\t"
|
||||
: : "i"(&((char *)key)[branch]) : : l_yes);
|
||||
: : [key]"Si"(key), [bit0]"i"(branch) : : l_yes);
|
||||
|
||||
return false;
|
||||
l_yes:
|
||||
|
|
|
|||
|
|
@ -17,9 +17,6 @@
|
|||
#ifndef __ASSEMBLY__
|
||||
|
||||
#include <generated/vdso-offsets.h>
|
||||
#ifdef CONFIG_COMPAT_VDSO
|
||||
#include <generated/vdso32-offsets.h>
|
||||
#endif
|
||||
|
||||
#define VDSO_SYMBOL(base, name) \
|
||||
({ \
|
||||
|
|
|
|||
|
|
@ -77,9 +77,9 @@ obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS) += patch-scs.o
|
|||
# We need to prevent the SCS patching code from patching itself. Using
|
||||
# -mbranch-protection=none here to avoid the patchable PAC opcodes from being
|
||||
# generated triggers an issue with full LTO on Clang, which stops emitting PAC
|
||||
# instructions altogether. So instead, omit the unwind tables used by the
|
||||
# patching code, so it will not be able to locate its own PAC instructions.
|
||||
CFLAGS_patch-scs.o += -fno-asynchronous-unwind-tables -fno-unwind-tables
|
||||
# instructions altogether. So disable LTO as well for the compilation unit.
|
||||
CFLAGS_patch-scs.o += -mbranch-protection=none
|
||||
CFLAGS_REMOVE_patch-scs.o += $(CC_FLAGS_LTO)
|
||||
|
||||
# Force dependency (vdso*-wrap.S includes vdso.so through incbin)
|
||||
$(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
|
||||
|
|
|
|||
|
|
@ -374,6 +374,7 @@ static const struct midr_range erratum_1463225[] = {
|
|||
static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2139208
|
||||
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
|
||||
MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
|
||||
#endif
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2119858
|
||||
MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
|
||||
|
|
@ -387,6 +388,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
|
|||
static const struct midr_range tsb_flush_fail_cpus[] = {
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2067961
|
||||
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
|
||||
MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
|
||||
#endif
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2054223
|
||||
MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
|
||||
|
|
@ -399,6 +401,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = {
|
|||
static struct midr_range trbe_write_out_of_range_cpus[] = {
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2253138
|
||||
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
|
||||
MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
|
||||
#endif
|
||||
#ifdef CONFIG_ARM64_ERRATUM_2224489
|
||||
MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
|
||||
|
|
|
|||
|
|
@ -1635,7 +1635,7 @@ void fpsimd_preserve_current_state(void)
|
|||
void fpsimd_signal_preserve_current_state(void)
|
||||
{
|
||||
fpsimd_preserve_current_state();
|
||||
if (test_thread_flag(TIF_SVE))
|
||||
if (current->thread.fp_type == FP_STATE_SVE)
|
||||
sve_to_fpsimd(current);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1500,7 +1500,8 @@ static const struct user_regset aarch64_regsets[] = {
|
|||
#ifdef CONFIG_ARM64_SVE
|
||||
[REGSET_SVE] = { /* Scalable Vector Extension */
|
||||
.core_note_type = NT_ARM_SVE,
|
||||
.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
|
||||
.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
|
||||
SVE_PT_REGS_SVE),
|
||||
SVE_VQ_BYTES),
|
||||
.size = SVE_VQ_BYTES,
|
||||
.align = SVE_VQ_BYTES,
|
||||
|
|
|
|||
|
|
@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
|
|||
vl = task_get_sme_vl(current);
|
||||
vq = sve_vq_from_vl(vl);
|
||||
flags |= SVE_SIG_FLAG_SM;
|
||||
} else if (test_thread_flag(TIF_SVE)) {
|
||||
} else if (current->thread.fp_type == FP_STATE_SVE) {
|
||||
vq = sve_vq_from_vl(vl);
|
||||
}
|
||||
|
||||
|
|
@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
|
|||
if (system_supports_sve() || system_supports_sme()) {
|
||||
unsigned int vq = 0;
|
||||
|
||||
if (add_all || test_thread_flag(TIF_SVE) ||
|
||||
if (add_all || current->thread.fp_type == FP_STATE_SVE ||
|
||||
thread_sm_enabled(¤t->thread)) {
|
||||
int vl = max(sve_max_vl(), sme_max_vl());
|
||||
|
||||
|
|
|
|||
|
|
@ -127,9 +127,6 @@ obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso)
|
|||
targets += vdso.lds
|
||||
CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
|
||||
|
||||
include/generated/vdso32-offsets.h: $(obj)/vdso32.so.dbg FORCE
|
||||
$(call if_changed,vdsosym)
|
||||
|
||||
# Strip rule for vdso.so
|
||||
$(obj)/vdso.so: OBJCOPYFLAGS := -S
|
||||
$(obj)/vdso.so: $(obj)/vdso32.so.dbg FORCE
|
||||
|
|
@ -166,9 +163,3 @@ quiet_cmd_vdsoas = AS32 $@
|
|||
|
||||
quiet_cmd_vdsomunge = MUNGE $@
|
||||
cmd_vdsomunge = $(obj)/$(munge) $< $@
|
||||
|
||||
# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO)
|
||||
gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
|
||||
quiet_cmd_vdsosym = VDSOSYM $@
|
||||
# The AArch64 nm should be able to read an AArch32 binary
|
||||
cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
|
||||
|
|
|
|||
|
|
@ -3,7 +3,6 @@
|
|||
# KVM configuration
|
||||
#
|
||||
|
||||
source "virt/lib/Kconfig"
|
||||
source "virt/kvm/Kconfig"
|
||||
|
||||
menuconfig VIRTUALIZATION
|
||||
|
|
|
|||
|
|
@ -1419,7 +1419,6 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
|
|||
level + 1);
|
||||
if (ret) {
|
||||
kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level);
|
||||
mm_ops->put_page(pgtable);
|
||||
return ERR_PTR(ret);
|
||||
}
|
||||
|
||||
|
|
@ -1502,7 +1501,6 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
|
|||
|
||||
if (!stage2_try_break_pte(ctx, mmu)) {
|
||||
kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level);
|
||||
mm_ops->put_page(childp);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void)
|
|||
hyp_mem_base);
|
||||
}
|
||||
|
||||
static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
|
||||
{
|
||||
if (host_kvm->arch.pkvm.handle) {
|
||||
WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
|
||||
host_kvm->arch.pkvm.handle));
|
||||
}
|
||||
|
||||
host_kvm->arch.pkvm.handle = 0;
|
||||
free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
|
||||
}
|
||||
|
||||
/*
|
||||
* Allocates and donates memory for hypervisor VM structs at EL2.
|
||||
*
|
||||
|
|
@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
|
|||
return 0;
|
||||
|
||||
destroy_vm:
|
||||
pkvm_destroy_hyp_vm(host_kvm);
|
||||
__pkvm_destroy_hyp_vm(host_kvm);
|
||||
return ret;
|
||||
free_vm:
|
||||
free_pages_exact(hyp_vm, hyp_vm_sz);
|
||||
|
|
@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm)
|
|||
{
|
||||
int ret = 0;
|
||||
|
||||
mutex_lock(&host_kvm->lock);
|
||||
mutex_lock(&host_kvm->arch.config_lock);
|
||||
if (!host_kvm->arch.pkvm.handle)
|
||||
ret = __pkvm_create_hyp_vm(host_kvm);
|
||||
mutex_unlock(&host_kvm->lock);
|
||||
mutex_unlock(&host_kvm->arch.config_lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
|
||||
{
|
||||
if (host_kvm->arch.pkvm.handle) {
|
||||
WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
|
||||
host_kvm->arch.pkvm.handle));
|
||||
}
|
||||
|
||||
host_kvm->arch.pkvm.handle = 0;
|
||||
free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
|
||||
mutex_lock(&host_kvm->arch.config_lock);
|
||||
__pkvm_destroy_hyp_vm(host_kvm);
|
||||
mutex_unlock(&host_kvm->arch.config_lock);
|
||||
}
|
||||
|
||||
int pkvm_init_host_vm(struct kvm *host_kvm)
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
static __always_inline bool arch_static_branch(struct static_key *key,
|
||||
bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: nop32 \n"
|
||||
" .pushsection __jump_table, \"aw\" \n"
|
||||
" .align 2 \n"
|
||||
|
|
@ -29,7 +29,7 @@ static __always_inline bool arch_static_branch(struct static_key *key,
|
|||
static __always_inline bool arch_static_branch_jump(struct static_key *key,
|
||||
bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: bsr32 %l[label] \n"
|
||||
" .pushsection __jump_table, \"aw\" \n"
|
||||
" .align 2 \n"
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ config LOONGARCH
|
|||
select ARCH_DISABLE_KASAN_INLINE
|
||||
select ARCH_ENABLE_MEMORY_HOTPLUG
|
||||
select ARCH_ENABLE_MEMORY_HOTREMOVE
|
||||
select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
|
||||
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
|
||||
select ARCH_HAS_CPU_FINALIZE_INIT
|
||||
select ARCH_HAS_FORTIFY_SOURCE
|
||||
|
|
@ -99,6 +100,7 @@ config LOONGARCH
|
|||
select HAVE_ARCH_KFENCE
|
||||
select HAVE_ARCH_KGDB if PERF_EVENTS
|
||||
select HAVE_ARCH_MMAP_RND_BITS if MMU
|
||||
select HAVE_ARCH_SECCOMP
|
||||
select HAVE_ARCH_SECCOMP_FILTER
|
||||
select HAVE_ARCH_TRACEHOOK
|
||||
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
|
||||
|
|
@ -632,23 +634,6 @@ config RANDOMIZE_BASE_MAX_OFFSET
|
|||
|
||||
This is limited by the size of the lower address memory, 256MB.
|
||||
|
||||
config SECCOMP
|
||||
bool "Enable seccomp to safely compute untrusted bytecode"
|
||||
depends on PROC_FS
|
||||
default y
|
||||
help
|
||||
This kernel feature is useful for number crunching applications
|
||||
that may need to compute untrusted bytecode during their
|
||||
execution. By using pipes or other transports made available to
|
||||
the process as file descriptors supporting the read/write
|
||||
syscalls, it's possible to isolate those applications in
|
||||
their own address space using seccomp. Once seccomp is
|
||||
enabled via /proc/<pid>/seccomp, it cannot be disabled
|
||||
and the task is only allowed to execute a few safe syscalls
|
||||
defined by each seccomp mode.
|
||||
|
||||
If unsure, say Y. Only embedded should say N here.
|
||||
|
||||
endmenu
|
||||
|
||||
config ARCH_SELECT_MEMORY_MODEL
|
||||
|
|
@ -667,10 +652,6 @@ config ARCH_SPARSEMEM_ENABLE
|
|||
or have huge holes in the physical address space for other reasons.
|
||||
See <file:Documentation/mm/numa.rst> for more.
|
||||
|
||||
config ARCH_ENABLE_THP_MIGRATION
|
||||
def_bool y
|
||||
depends on TRANSPARENT_HUGEPAGE
|
||||
|
||||
config ARCH_MEMORY_PROBE
|
||||
def_bool y
|
||||
depends on MEMORY_HOTPLUG
|
||||
|
|
|
|||
|
|
@ -32,8 +32,10 @@ static inline bool acpi_has_cpu_in_madt(void)
|
|||
return true;
|
||||
}
|
||||
|
||||
#define MAX_CORE_PIC 256
|
||||
|
||||
extern struct list_head acpi_wakeup_device_list;
|
||||
extern struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
|
||||
extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
|
||||
|
||||
extern int __init parse_acpi_topology(void);
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
static __always_inline bool arch_static_branch(struct static_key * const key, const bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: nop \n\t"
|
||||
JUMP_TABLE_ENTRY
|
||||
: : "i"(&((char *)key)[branch]) : : l_yes);
|
||||
|
|
@ -35,7 +35,7 @@ static __always_inline bool arch_static_branch(struct static_key * const key, co
|
|||
|
||||
static __always_inline bool arch_static_branch_jump(struct static_key * const key, const bool branch)
|
||||
{
|
||||
asm_volatile_goto(
|
||||
asm goto(
|
||||
"1: b %l[l_yes] \n\t"
|
||||
JUMP_TABLE_ENTRY
|
||||
: : "i"(&((char *)key)[branch]) : : l_yes);
|
||||
|
|
|
|||
|
|
@ -29,11 +29,9 @@ int disabled_cpus;
|
|||
|
||||
u64 acpi_saved_sp;
|
||||
|
||||
#define MAX_CORE_PIC 256
|
||||
|
||||
#define PREFIX "ACPI: "
|
||||
|
||||
struct acpi_madt_core_pic acpi_core_pic[NR_CPUS];
|
||||
struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
|
||||
|
||||
void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -44,6 +44,9 @@ void *kasan_mem_to_shadow(const void *addr)
|
|||
unsigned long xrange = (maddr >> XRANGE_SHIFT) & 0xffff;
|
||||
unsigned long offset = 0;
|
||||
|
||||
if (maddr >= FIXADDR_START)
|
||||
return (void *)(kasan_early_shadow_page);
|
||||
|
||||
maddr &= XRANGE_SHADOW_MASK;
|
||||
switch (xrange) {
|
||||
case XKPRANGE_CC_SEG:
|
||||
|
|
|
|||
|
|
@ -2,6 +2,7 @@
|
|||
# Objects to go into the VDSO.
|
||||
|
||||
KASAN_SANITIZE := n
|
||||
UBSAN_SANITIZE := n
|
||||
KCOV_INSTRUMENT := n
|
||||
|
||||
# Include the generic Makefile to check the built vdso.
|
||||
|
|
|
|||
|
|
@ -15,10 +15,10 @@
|
|||
KBUILD_DEFCONFIG := multi_defconfig
|
||||
|
||||
ifdef cross_compiling
|
||||
ifeq ($(CROSS_COMPILE),)
|
||||
ifeq ($(CROSS_COMPILE),)
|
||||
CROSS_COMPILE := $(call cc-cross-prefix, \
|
||||
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
#
|
||||
|
|
|
|||
|
|
@ -241,7 +241,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
|
|||
" .set pop"
|
||||
: "=&r" (sum), "=&r" (tmp)
|
||||
: "r" (saddr), "r" (daddr),
|
||||
"0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
|
||||
"0" (htonl(len)), "r" (htonl(proto)), "r" (sum)
|
||||
: "memory");
|
||||
|
||||
return csum_fold(sum);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ extern void jump_label_apply_nops(struct module *mod);
|
|||
|
||||
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\t" B_INSN " 2f\n\t"
|
||||
asm goto("1:\t" B_INSN " 2f\n\t"
|
||||
"2:\t.insn\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
WORD_INSN " 1b, %l[l_yes], %0\n\t"
|
||||
|
|
@ -53,7 +53,7 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran
|
|||
|
||||
static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\t" J_INSN " %l[l_yes]\n\t"
|
||||
asm goto("1:\t" J_INSN " %l[l_yes]\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
WORD_INSN " 1b, %l[l_yes], %0\n\t"
|
||||
".popsection\n\t"
|
||||
|
|
|
|||
|
|
@ -60,6 +60,7 @@ static inline void instruction_pointer_set(struct pt_regs *regs,
|
|||
unsigned long val)
|
||||
{
|
||||
regs->cp0_epc = val;
|
||||
regs->cp0_cause &= ~CAUSEF_BD;
|
||||
}
|
||||
|
||||
/* Query offset/name of register from its name/offset */
|
||||
|
|
@ -154,6 +155,8 @@ static inline long regs_return_value(struct pt_regs *regs)
|
|||
}
|
||||
|
||||
#define instruction_pointer(regs) ((regs)->cp0_epc)
|
||||
extern unsigned long exception_ip(struct pt_regs *regs);
|
||||
#define exception_ip(regs) exception_ip(regs)
|
||||
#define profile_pc(regs) instruction_pointer(regs)
|
||||
|
||||
extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@
|
|||
#include <linux/seccomp.h>
|
||||
#include <linux/ftrace.h>
|
||||
|
||||
#include <asm/branch.h>
|
||||
#include <asm/byteorder.h>
|
||||
#include <asm/cpu.h>
|
||||
#include <asm/cpu-info.h>
|
||||
|
|
@ -48,6 +49,12 @@
|
|||
#define CREATE_TRACE_POINTS
|
||||
#include <trace/events/syscalls.h>
|
||||
|
||||
unsigned long exception_ip(struct pt_regs *regs)
|
||||
{
|
||||
return exception_epc(regs);
|
||||
}
|
||||
EXPORT_SYMBOL(exception_ip);
|
||||
|
||||
/*
|
||||
* Called by kernel/ptrace.c when detaching..
|
||||
*
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@ config PARISC
|
|||
select RTC_DRV_GENERIC
|
||||
select INIT_ALL_POSSIBLE
|
||||
select BUG
|
||||
select BUILDTIME_TABLE_SORT
|
||||
select HAVE_KERNEL_UNCOMPRESSED
|
||||
select HAVE_PCI
|
||||
select HAVE_PERF_EVENTS
|
||||
|
|
|
|||
|
|
@ -50,12 +50,12 @@ export CROSS32CC
|
|||
|
||||
# Set default cross compiler for kernel build
|
||||
ifdef cross_compiling
|
||||
ifeq ($(CROSS_COMPILE),)
|
||||
ifeq ($(CROSS_COMPILE),)
|
||||
CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux
|
||||
CROSS_COMPILE := $(call cc-cross-prefix, \
|
||||
$(foreach a,$(CC_ARCHES), \
|
||||
$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
|
||||
endif
|
||||
endif
|
||||
endif
|
||||
|
||||
ifdef CONFIG_DYNAMIC_FTRACE
|
||||
|
|
|
|||
|
|
@ -576,6 +576,7 @@
|
|||
.section __ex_table,"aw" ! \
|
||||
.align 4 ! \
|
||||
.word (fault_addr - .), (except_addr - .) ! \
|
||||
or %r0,%r0,%r0 ! \
|
||||
.previous
|
||||
|
||||
|
||||
|
|
|
|||
64
arch/parisc/include/asm/extable.h
Normal file
64
arch/parisc/include/asm/extable.h
Normal file
|
|
@ -0,0 +1,64 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef __PARISC_EXTABLE_H
|
||||
#define __PARISC_EXTABLE_H
|
||||
|
||||
#include <asm/ptrace.h>
|
||||
#include <linux/compiler.h>
|
||||
|
||||
/*
|
||||
* The exception table consists of three addresses:
|
||||
*
|
||||
* - A relative address to the instruction that is allowed to fault.
|
||||
* - A relative address at which the program should continue (fixup routine)
|
||||
* - An asm statement which specifies which CPU register will
|
||||
* receive -EFAULT when an exception happens if the lowest bit in
|
||||
* the fixup address is set.
|
||||
*
|
||||
* Note: The register specified in the err_opcode instruction will be
|
||||
* modified at runtime if a fault happens. Register %r0 will be ignored.
|
||||
*
|
||||
* Since relative addresses are used, 32bit values are sufficient even on
|
||||
* 64bit kernel.
|
||||
*/
|
||||
|
||||
struct pt_regs;
|
||||
int fixup_exception(struct pt_regs *regs);
|
||||
|
||||
#define ARCH_HAS_RELATIVE_EXTABLE
|
||||
struct exception_table_entry {
|
||||
int insn; /* relative address of insn that is allowed to fault. */
|
||||
int fixup; /* relative address of fixup routine */
|
||||
int err_opcode; /* sample opcode with register which holds error code */
|
||||
};
|
||||
|
||||
#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr, opcode )\
|
||||
".section __ex_table,\"aw\"\n" \
|
||||
".align 4\n" \
|
||||
".word (" #fault_addr " - .), (" #except_addr " - .)\n" \
|
||||
opcode "\n" \
|
||||
".previous\n"
|
||||
|
||||
/*
|
||||
* ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
|
||||
* (with lowest bit set) for which the fault handler in fixup_exception() will
|
||||
* load -EFAULT on fault into the register specified by the err_opcode instruction,
|
||||
* and zeroes the target register in case of a read fault in get_user().
|
||||
*/
|
||||
#define ASM_EXCEPTIONTABLE_VAR(__err_var) \
|
||||
int __err_var = 0
|
||||
#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr, register )\
|
||||
ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1, "or %%r0,%%r0," register)
|
||||
|
||||
static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
|
||||
struct exception_table_entry *b,
|
||||
struct exception_table_entry tmp,
|
||||
int delta)
|
||||
{
|
||||
a->fixup = b->fixup + delta;
|
||||
b->fixup = tmp.fixup - delta;
|
||||
a->err_opcode = b->err_opcode;
|
||||
b->err_opcode = tmp.err_opcode;
|
||||
}
|
||||
#define swap_ex_entry_fixup swap_ex_entry_fixup
|
||||
|
||||
#endif
|
||||
|
|
@ -12,7 +12,7 @@
|
|||
|
||||
static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\n\t"
|
||||
asm goto("1:\n\t"
|
||||
"nop\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
".align %1\n\t"
|
||||
|
|
@ -29,7 +29,7 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran
|
|||
|
||||
static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch)
|
||||
{
|
||||
asm_volatile_goto("1:\n\t"
|
||||
asm goto("1:\n\t"
|
||||
"b,n %l[l_yes]\n\t"
|
||||
".pushsection __jump_table, \"aw\"\n\t"
|
||||
".align %1\n\t"
|
||||
|
|
|
|||
|
|
@ -8,7 +8,8 @@
|
|||
"copy %%r0,%0\n" \
|
||||
"8:\tlpa %%r0(%1),%0\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b, \
|
||||
"or %%r0,%%r0,%%r0") \
|
||||
: "=&r" (pa) \
|
||||
: "r" (va) \
|
||||
: "memory" \
|
||||
|
|
@ -22,7 +23,8 @@
|
|||
"copy %%r0,%0\n" \
|
||||
"8:\tlpa %%r0(%%sr3,%1),%0\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b, \
|
||||
"or %%r0,%%r0,%%r0") \
|
||||
: "=&r" (pa) \
|
||||
: "r" (va) \
|
||||
: "memory" \
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@
|
|||
*/
|
||||
#include <asm/page.h>
|
||||
#include <asm/cache.h>
|
||||
#include <asm/extable.h>
|
||||
|
||||
#include <linux/bug.h>
|
||||
#include <linux/string.h>
|
||||
|
|
@ -26,37 +27,6 @@
|
|||
#define STD_USER(sr, x, ptr) __put_user_asm(sr, "std", x, ptr)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The exception table contains two values: the first is the relative offset to
|
||||
* the address of the instruction that is allowed to fault, and the second is
|
||||
* the relative offset to the address of the fixup routine. Since relative
|
||||
* addresses are used, 32bit values are sufficient even on 64bit kernel.
|
||||
*/
|
||||
|
||||
#define ARCH_HAS_RELATIVE_EXTABLE
|
||||
struct exception_table_entry {
|
||||
int insn; /* relative address of insn that is allowed to fault. */
|
||||
int fixup; /* relative address of fixup routine */
|
||||
};
|
||||
|
||||
#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
|
||||
".section __ex_table,\"aw\"\n" \
|
||||
".align 4\n" \
|
||||
".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
|
||||
".previous\n"
|
||||
|
||||
/*
|
||||
* ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
|
||||
* (with lowest bit set) for which the fault handler in fixup_exception() will
|
||||
* load -EFAULT into %r29 for a read or write fault, and zeroes the target
|
||||
* register in case of a read fault in get_user().
|
||||
*/
|
||||
#define ASM_EXCEPTIONTABLE_REG 29
|
||||
#define ASM_EXCEPTIONTABLE_VAR(__variable) \
|
||||
register long __variable __asm__ ("r29") = 0
|
||||
#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
|
||||
ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
|
||||
|
||||
#define __get_user_internal(sr, val, ptr) \
|
||||
({ \
|
||||
ASM_EXCEPTIONTABLE_VAR(__gu_err); \
|
||||
|
|
@ -83,7 +53,7 @@ struct exception_table_entry {
|
|||
\
|
||||
__asm__("1: " ldx " 0(%%sr%2,%3),%0\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1") \
|
||||
: "=r"(__gu_val), "+r"(__gu_err) \
|
||||
: "i"(sr), "r"(ptr)); \
|
||||
\
|
||||
|
|
@ -115,8 +85,8 @@ struct exception_table_entry {
|
|||
"1: ldw 0(%%sr%2,%3),%0\n" \
|
||||
"2: ldw 4(%%sr%2,%3),%R0\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1") \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%1") \
|
||||
: "=&r"(__gu_tmp.l), "+r"(__gu_err) \
|
||||
: "i"(sr), "r"(ptr)); \
|
||||
\
|
||||
|
|
@ -174,7 +144,7 @@ struct exception_table_entry {
|
|||
__asm__ __volatile__ ( \
|
||||
"1: " stx " %1,0(%%sr%2,%3)\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0") \
|
||||
: "+r"(__pu_err) \
|
||||
: "r"(x), "i"(sr), "r"(ptr))
|
||||
|
||||
|
|
@ -186,15 +156,14 @@ struct exception_table_entry {
|
|||
"1: stw %1,0(%%sr%2,%3)\n" \
|
||||
"2: stw %R1,4(%%sr%2,%3)\n" \
|
||||
"9:\n" \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0") \
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%0") \
|
||||
: "+r"(__pu_err) \
|
||||
: "r"(__val), "i"(sr), "r"(ptr)); \
|
||||
} while (0)
|
||||
|
||||
#endif /* !defined(CONFIG_64BIT) */
|
||||
|
||||
|
||||
/*
|
||||
* Complex access routines -- external declarations
|
||||
*/
|
||||
|
|
@ -216,7 +185,4 @@ unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
|
|||
#define INLINE_COPY_TO_USER
|
||||
#define INLINE_COPY_FROM_USER
|
||||
|
||||
struct pt_regs;
|
||||
int fixup_exception(struct pt_regs *regs);
|
||||
|
||||
#endif /* __PARISC_UACCESS_H */
|
||||
|
|
|
|||
|
|
@ -58,7 +58,7 @@ int pa_serialize_tlb_flushes __ro_after_init;
|
|||
|
||||
struct pdc_cache_info cache_info __ro_after_init;
|
||||
#ifndef CONFIG_PA20
|
||||
struct pdc_btlb_info btlb_info __ro_after_init;
|
||||
struct pdc_btlb_info btlb_info;
|
||||
#endif
|
||||
|
||||
DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
|
||||
|
|
@ -264,6 +264,10 @@ parisc_cache_init(void)
|
|||
icache_stride = CAFL_STRIDE(cache_info.ic_conf);
|
||||
#undef CAFL_STRIDE
|
||||
|
||||
/* stride needs to be non-zero, otherwise cache flushes will not work */
|
||||
WARN_ON(cache_info.dc_size && dcache_stride == 0);
|
||||
WARN_ON(cache_info.ic_size && icache_stride == 0);
|
||||
|
||||
if ((boot_cpu_data.pdc.capabilities & PDC_MODEL_NVA_MASK) ==
|
||||
PDC_MODEL_NVA_UNSUPPORTED) {
|
||||
printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n");
|
||||
|
|
@ -850,7 +854,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
|
|||
#endif
|
||||
" fic,m %3(%4,%0)\n"
|
||||
"2: sync\n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
|
||||
: "+r" (start), "+r" (error)
|
||||
: "r" (end), "r" (dcache_stride), "i" (SR_USER));
|
||||
}
|
||||
|
|
@ -865,7 +869,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
|
|||
#endif
|
||||
" fdc,m %3(%4,%0)\n"
|
||||
"2: sync\n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
|
||||
: "+r" (start), "+r" (error)
|
||||
: "r" (end), "r" (icache_stride), "i" (SR_USER));
|
||||
}
|
||||
|
|
|
|||
|
|
@ -742,7 +742,7 @@ parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
|
|||
};
|
||||
|
||||
if (device_for_each_child(parent, &recurse_data, descend_children))
|
||||
{ /* nothing */ };
|
||||
{ /* nothing */ }
|
||||
|
||||
return d.dev;
|
||||
}
|
||||
|
|
@ -1004,6 +1004,9 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
|
|||
|
||||
pr_info("\n");
|
||||
|
||||
/* Prevent hung task messages when printing on serial console */
|
||||
cond_resched();
|
||||
|
||||
pr_info("#define HPA_%08lx_DESCRIPTION \"%s\"\n",
|
||||
hpa, parisc_hardware_description(&dev->id));
|
||||
|
||||
|
|
|
|||
|
|
@ -120,8 +120,8 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
|
|||
"2: ldbs 1(%%sr1,%3), %0\n"
|
||||
" depw %2, 23, 24, %0\n"
|
||||
"3: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
|
||||
: "+r" (val), "+r" (ret), "=&r" (temp1)
|
||||
: "r" (saddr), "r" (regs->isr) );
|
||||
|
||||
|
|
@ -152,8 +152,8 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
|
|||
" mtctl %2,11\n"
|
||||
" vshd %0,%3,%0\n"
|
||||
"3: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
|
||||
: "+r" (val), "+r" (ret), "=&r" (temp1), "=&r" (temp2)
|
||||
: "r" (saddr), "r" (regs->isr) );
|
||||
|
||||
|
|
@ -189,8 +189,8 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
|
|||
" mtsar %%r19\n"
|
||||
" shrpd %0,%%r20,%%sar,%0\n"
|
||||
"3: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
|
||||
: "=r" (val), "+r" (ret)
|
||||
: "0" (val), "r" (saddr), "r" (regs->isr)
|
||||
: "r19", "r20" );
|
||||
|
|
@ -209,9 +209,9 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
|
|||
" vshd %0,%R0,%0\n"
|
||||
" vshd %R0,%4,%R0\n"
|
||||
"4: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b, "%1")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b, "%1")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b, "%1")
|
||||
: "+r" (val), "+r" (ret), "+r" (saddr), "=&r" (shift), "=&r" (temp1)
|
||||
: "r" (regs->isr) );
|
||||
}
|
||||
|
|
@ -244,8 +244,8 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
|
|||
"1: stb %1, 0(%%sr1, %3)\n"
|
||||
"2: stb %2, 1(%%sr1, %3)\n"
|
||||
"3: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
|
||||
: "+r" (ret), "=&r" (temp1)
|
||||
: "r" (val), "r" (regs->ior), "r" (regs->isr) );
|
||||
|
||||
|
|
@ -285,8 +285,8 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
|
|||
" stw %%r20,0(%%sr1,%2)\n"
|
||||
" stw %%r21,4(%%sr1,%2)\n"
|
||||
"3: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
|
||||
: "+r" (ret)
|
||||
: "r" (val), "r" (regs->ior), "r" (regs->isr)
|
||||
: "r19", "r20", "r21", "r22", "r1" );
|
||||
|
|
@ -329,10 +329,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
|
|||
"3: std %%r20,0(%%sr1,%2)\n"
|
||||
"4: std %%r21,8(%%sr1,%2)\n"
|
||||
"5: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b, "%0")
|
||||
: "+r" (ret)
|
||||
: "r" (val), "r" (regs->ior), "r" (regs->isr)
|
||||
: "r19", "r20", "r21", "r22", "r1" );
|
||||
|
|
@ -357,11 +357,11 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
|
|||
"4: stw %%r1,4(%%sr1,%2)\n"
|
||||
"5: stw %R1,8(%%sr1,%2)\n"
|
||||
"6: \n"
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b)
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b, "%0")
|
||||
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b, "%0")
|
||||
: "+r" (ret)
|
||||
: "r" (val), "r" (regs->ior), "r" (regs->isr)
|
||||
: "r19", "r20", "r21", "r1" );
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue